We do a "SELECT * FROM table" just to fetch the primary key columns; so reuse the same XResultSet to fetch all columns. Else, we immediately issue a "SELECT * FROM table WHERE primary_key=current_value" to read the other columns, which is wasteful and particularly silly. Commit1ae17f5b03
already tried to do that, but was essentially reverted piecewise because it caused fdo#47520, fdo#48345, fdo#50372. Commit c08067d6da94743d53217cbc26cffae00a22dc3a thought it did that, but actually reverted commit1ae17f5b03
. This implementation fetches the whole current row and caches it in memory; only one row is cached: when the current row changes, the cache contains the new current row. This could be problematic (wrt to memory consumption) if the current row is big (e.g. with BLOBs) and nobody is interested in the data anyway (as would often be the case with BLOBs). Note that because of our "SELECT *", the driver most probably has it in memory already anyway, so we don't make the situation that much worse. This could be incrementally improved with a heuristic of not preemptively caching binary data (and also not LONGVARCHAR / TEXT / MEMO / ...); a getFOO on these columns would issue a specific "SELECT column FROM table WHERE primary_key=current_value" each time. The *real* complete fix to all these issues would be to not do "SELECT *" at all. Use "SELECT pkey_col1, pkey_col2, ..." when we are only interested in the key columns. As to data, somehow figure out which columns were ar interested in and "SELECT" only these (and maybe only those with "small datatype"?). Interesting columns could be determined by our caller (creator) as an argument to our constructor, or some heuristic (no binary data, no "big" unbound data). Also be extra smart and use *(m_aKeyIter) when getFOO is called on a column included in it (and don't include it in any subsequent SELECT). However, there are several pitfalls. One is buggy drivers that give use column names of columns that we cannot fetch :-| Using "SELECT *" works around that because the driver there *obviously* gives us only fetchable columns in the result. Another one is the very restrictive nature of some database access technologies. Take for example ODBC: - Data can be fetched only *once* (with the SQLGetData interface; bound columns offer a way around that, but that's viable only for constant-length data, not variable-length data). This could be addressed by an intelligent & lazy cache. - Data must be fetched in increasing order of column number (again, this is about SQLGetData). This is a harder issue. The current solution has the nice advantage of completely isolating the rest of LibO from these restrictions. I don't currently see how to cleanly avoid (potentially unnecessarily) caching column 4 if we are asked for column 3 then column 5, just in case we are asked for column 4 later on, unless we issue a specific "SELECT column4" later. But the latter would be quite expensive in terms of app-to-database roudtripe times :-( and thus creates another performance issue. Change-Id: I999b3f8f0b8a215acb390ffefc839235346e8353
1790 lines
72 KiB
C++
1790 lines
72 KiB
C++
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
|
|
/*************************************************************************
|
|
*
|
|
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
|
|
*
|
|
* Copyright 2000, 2010 Oracle andor its affiliates.
|
|
*
|
|
* OpenOffice.org - a multi-platform office productivity suite
|
|
*
|
|
* This file is part of OpenOffice.org.
|
|
*
|
|
* OpenOffice.org is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU Lesser General Public License version 3
|
|
* only, as published by the Free Software Foundation.
|
|
*
|
|
* OpenOffice.org is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU Lesser General Public License version 3 for more details
|
|
* (a copy is included in the LICENSE file that accompanied this code).
|
|
*
|
|
* You should have received a copy of the GNU Lesser General Public License
|
|
* version 3 along with OpenOffice.org. If not, see
|
|
* <http://www.openoffice.org/license.html>
|
|
* for a copy of the LGPLv3 License.
|
|
*
|
|
************************************************************************/
|
|
|
|
|
|
#include "KeySet.hxx"
|
|
#include "core_resource.hxx"
|
|
#include "core_resource.hrc"
|
|
#include <com/sun/star/beans/XPropertySet.hpp>
|
|
#include <com/sun/star/sdbc/XDatabaseMetaData.hpp>
|
|
#include <com/sun/star/sdbc/ColumnValue.hpp>
|
|
#include <com/sun/star/sdbc/XPreparedStatement.hpp>
|
|
#include <com/sun/star/sdbc/XParameters.hpp>
|
|
#include <com/sun/star/sdbc/XGeneratedResultSet.hpp>
|
|
#include <com/sun/star/sdbc/XColumnLocate.hpp>
|
|
#include <com/sun/star/container/XIndexAccess.hpp>
|
|
#include "dbastrings.hrc"
|
|
#include "apitools.hxx"
|
|
#include <com/sun/star/sdbcx/XKeysSupplier.hpp>
|
|
#include <com/sun/star/sdb/XSingleSelectQueryComposer.hpp>
|
|
#include <com/sun/star/sdbcx/XIndexesSupplier.hpp>
|
|
#include <cppuhelper/typeprovider.hxx>
|
|
#include <comphelper/types.hxx>
|
|
#include <com/sun/star/sdbcx/KeyType.hpp>
|
|
#include <connectivity/dbtools.hxx>
|
|
#include <connectivity/dbexception.hxx>
|
|
#include <list>
|
|
#include <algorithm>
|
|
#include <string.h>
|
|
#include <com/sun/star/io/XInputStream.hpp>
|
|
#include <com/sun/star/sdbcx/XTablesSupplier.hpp>
|
|
#include "querycomposer.hxx"
|
|
#include "composertools.hxx"
|
|
#include <tools/debug.hxx>
|
|
#include <rtl/logfile.hxx>
|
|
#include "PrivateRow.hxx"
|
|
|
|
using namespace dbaccess;
|
|
using namespace ::connectivity;
|
|
using namespace ::dbtools;
|
|
using namespace ::com::sun::star::uno;
|
|
using namespace ::com::sun::star::beans;
|
|
using namespace ::com::sun::star::sdbc;
|
|
using namespace ::com::sun::star::sdb;
|
|
using namespace ::com::sun::star::sdbcx;
|
|
using namespace ::com::sun::star::container;
|
|
using namespace ::com::sun::star::lang;
|
|
using namespace ::com::sun::star::util;
|
|
using namespace ::com::sun::star::io;
|
|
using namespace ::com::sun::star;
|
|
using namespace ::cppu;
|
|
using namespace ::osl;
|
|
|
|
namespace
|
|
{
|
|
void lcl_fillIndexColumns(const Reference<XIndexAccess>& _xIndexes, ::std::vector< Reference<XNameAccess> >& _rAllIndexColumns)
|
|
{
|
|
if ( _xIndexes.is() )
|
|
{
|
|
Reference<XPropertySet> xIndexColsSup;
|
|
sal_Int32 nCount = _xIndexes->getCount();
|
|
for(sal_Int32 j = 0 ; j < nCount ; ++j)
|
|
{
|
|
xIndexColsSup.set(_xIndexes->getByIndex(j),UNO_QUERY);
|
|
if( xIndexColsSup.is()
|
|
&& comphelper::getBOOL(xIndexColsSup->getPropertyValue(PROPERTY_ISUNIQUE))
|
|
&& !comphelper::getBOOL(xIndexColsSup->getPropertyValue(PROPERTY_ISPRIMARYKEYINDEX))
|
|
)
|
|
_rAllIndexColumns.push_back(Reference<XColumnsSupplier>(xIndexColsSup,UNO_QUERY)->getColumns());
|
|
}
|
|
}
|
|
}
|
|
|
|
template < typename T > inline void tryDispose( Reference<T> &r )
|
|
{
|
|
try
|
|
{
|
|
::comphelper::disposeComponent(r);
|
|
}
|
|
catch(const Exception&)
|
|
{
|
|
r = NULL;
|
|
}
|
|
catch(...)
|
|
{
|
|
OSL_FAIL("Unknown Exception occurred");
|
|
}
|
|
}
|
|
}
|
|
DBG_NAME(OKeySet)
|
|
|
|
OKeySet::OKeySet(const connectivity::OSQLTable& _xTable,
|
|
const Reference< XIndexAccess>& _xTableKeys,
|
|
const ::rtl::OUString& _rUpdateTableName, // this can be the alias or the full qualified name
|
|
const Reference< XSingleSelectQueryAnalyzer >& _xComposer,
|
|
const ORowSetValueVector& _aParameterValueForCache,
|
|
sal_Int32 i_nMaxRows,
|
|
sal_Int32& o_nRowCount)
|
|
:OCacheSet(i_nMaxRows)
|
|
,m_aParameterValueForCache(_aParameterValueForCache)
|
|
,m_pKeyColumnNames(NULL)
|
|
,m_pColumnNames(NULL)
|
|
,m_pParameterNames(NULL)
|
|
,m_pForeignColumnNames(NULL)
|
|
,m_xTable(_xTable)
|
|
,m_xTableKeys(_xTableKeys)
|
|
,m_xComposer(_xComposer)
|
|
,m_sUpdateTableName(_rUpdateTableName)
|
|
,m_rRowCount(o_nRowCount)
|
|
,m_bRowCountFinal(sal_False)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::OKeySet" );
|
|
DBG_CTOR(OKeySet,NULL);
|
|
|
|
}
|
|
|
|
OKeySet::~OKeySet()
|
|
{
|
|
tryDispose(m_xStatement);
|
|
tryDispose(m_xSet);
|
|
|
|
m_xComposer = NULL;
|
|
|
|
DBG_DTOR(OKeySet,NULL);
|
|
}
|
|
void OKeySet::initColumns()
|
|
{
|
|
Reference<XDatabaseMetaData> xMeta = m_xConnection->getMetaData();
|
|
bool bCase = (xMeta.is() && xMeta->supportsMixedCaseQuotedIdentifiers()) ? true : false;
|
|
m_pKeyColumnNames.reset( new SelectColumnsMetaData(bCase) );
|
|
m_pColumnNames.reset( new SelectColumnsMetaData(bCase) );
|
|
m_pParameterNames.reset( new SelectColumnsMetaData(bCase) );
|
|
m_pForeignColumnNames.reset( new SelectColumnsMetaData(bCase) );
|
|
}
|
|
|
|
SAL_WNODEPRECATED_DECLARATIONS_PUSH
|
|
void OKeySet::findTableColumnsMatching_throw( const Any& i_aTable,
|
|
const ::rtl::OUString& i_rUpdateTableName,
|
|
const Reference<XDatabaseMetaData>& i_xMeta,
|
|
const Reference<XNameAccess>& i_xQueryColumns,
|
|
::std::auto_ptr<SelectColumnsMetaData>& o_pKeyColumnNames)
|
|
{
|
|
// first ask the database itself for the best columns which can be used
|
|
Sequence< ::rtl::OUString> aBestColumnNames;
|
|
Reference<XNameAccess> xKeyColumns = getPrimaryKeyColumns_throw(i_aTable);
|
|
if ( xKeyColumns.is() )
|
|
aBestColumnNames = xKeyColumns->getElementNames();
|
|
|
|
const Reference<XColumnsSupplier> xTblColSup(i_aTable,UNO_QUERY_THROW);
|
|
const Reference<XNameAccess> xTblColumns = xTblColSup->getColumns();
|
|
// locate parameter in select columns
|
|
Reference<XParametersSupplier> xParaSup(m_xComposer,UNO_QUERY);
|
|
Reference<XIndexAccess> xQueryParameters = xParaSup->getParameters();
|
|
const sal_Int32 nParaCount = xQueryParameters->getCount();
|
|
Sequence< ::rtl::OUString> aParameterColumns(nParaCount);
|
|
for(sal_Int32 i = 0; i< nParaCount;++i)
|
|
{
|
|
Reference<XPropertySet> xPara(xQueryParameters->getByIndex(i),UNO_QUERY_THROW);
|
|
xPara->getPropertyValue(PROPERTY_REALNAME) >>= aParameterColumns[i];
|
|
}
|
|
|
|
::rtl::OUString sUpdateTableName( i_rUpdateTableName );
|
|
if ( sUpdateTableName.isEmpty() )
|
|
{
|
|
OSL_FAIL( "OKeySet::findTableColumnsMatching_throw: This is a fallback only - it won't work when the table has an alias name." );
|
|
// If i_aTable originates from a query composer, and is a table which appears with an alias in the SELECT statement,
|
|
// then the below code will not produce correct results.
|
|
// For instance, imagine a "SELECT alias.col FROM table AS alias". Now i_aTable would be the table named
|
|
// "table", so our sUpdateTableName would be "table" as well - not the information about the "alias" is
|
|
// already lost here.
|
|
// now getColumnPositions would travers the columns, and check which of them belong to the table denoted
|
|
// by sUpdateTableName. Since the latter is "table", but the columns only know that they belong to a table
|
|
// named "alias", there will be no matching - so getColumnPositions wouldn't find anything.
|
|
|
|
::rtl::OUString sCatalog, sSchema, sTable;
|
|
Reference<XPropertySet> xTableProp( i_aTable, UNO_QUERY_THROW );
|
|
xTableProp->getPropertyValue( PROPERTY_CATALOGNAME )>>= sCatalog;
|
|
xTableProp->getPropertyValue( PROPERTY_SCHEMANAME ) >>= sSchema;
|
|
xTableProp->getPropertyValue( PROPERTY_NAME ) >>= sTable;
|
|
sUpdateTableName = dbtools::composeTableName( i_xMeta, sCatalog, sSchema, sTable, sal_False, ::dbtools::eInDataManipulation );
|
|
}
|
|
|
|
::dbaccess::getColumnPositions(i_xQueryColumns,aBestColumnNames,sUpdateTableName,(*o_pKeyColumnNames),true);
|
|
::dbaccess::getColumnPositions(i_xQueryColumns,xTblColumns->getElementNames(),sUpdateTableName,(*m_pColumnNames),true);
|
|
::dbaccess::getColumnPositions(i_xQueryColumns,aParameterColumns,sUpdateTableName,(*m_pParameterNames),true);
|
|
|
|
if ( o_pKeyColumnNames->empty() )
|
|
{
|
|
::dbtools::throwGenericSQLException( ::rtl::OUString( "Could not find any key column." ), *this );
|
|
}
|
|
|
|
for ( SelectColumnsMetaData::const_iterator keyColumn = o_pKeyColumnNames->begin();
|
|
keyColumn != o_pKeyColumnNames->end();
|
|
++keyColumn
|
|
)
|
|
{
|
|
if ( !xTblColumns->hasByName( keyColumn->second.sRealName ) )
|
|
continue;
|
|
|
|
Reference<XPropertySet> xProp( xTblColumns->getByName( keyColumn->second.sRealName ), UNO_QUERY );
|
|
sal_Bool bAuto = sal_False;
|
|
if ( ( xProp->getPropertyValue( PROPERTY_ISAUTOINCREMENT ) >>= bAuto ) && bAuto )
|
|
m_aAutoColumns.push_back( keyColumn->first );
|
|
}
|
|
}
|
|
SAL_WNODEPRECATED_DECLARATIONS_POP
|
|
|
|
namespace
|
|
{
|
|
void appendOneKeyColumnClause( const ::rtl::OUString &tblName, const ::rtl::OUString &colName, ::rtl::OUStringBuffer &o_buf )
|
|
{
|
|
static ::rtl::OUString s_sDot(".");
|
|
static ::rtl::OUString s_sParam0(" ( 1 = ? AND ");
|
|
static ::rtl::OUString s_sParam1(" = ? OR 1 = ? AND ");
|
|
static ::rtl::OUString s_sParam2(" IS NULL ) ");
|
|
o_buf.append(s_sParam0);
|
|
o_buf.append(tblName);
|
|
o_buf.append(s_sDot);
|
|
o_buf.append(colName);
|
|
o_buf.append(s_sParam1);
|
|
o_buf.append(tblName);
|
|
o_buf.append(s_sDot);
|
|
o_buf.append(colName);
|
|
o_buf.append(s_sParam2);
|
|
}
|
|
}
|
|
|
|
void OKeySet::setOneKeyColumnParameter( sal_Int32 &nPos, const Reference< XParameters > &_xParameter, const connectivity::ORowSetValue &_rValue, sal_Int32 _nType, sal_Int32 _nScale ) const
|
|
{
|
|
if ( _rValue.isNull() )
|
|
{
|
|
_xParameter->setByte( nPos++, 0 );
|
|
// We do the full call so that the right sqlType is passed to setNull
|
|
setParameter( nPos++, _xParameter, _rValue, _nType, _nScale );
|
|
_xParameter->setByte( nPos++, 1 );
|
|
}
|
|
else
|
|
{
|
|
_xParameter->setByte( nPos++, 1 );
|
|
setParameter( nPos++, _xParameter, _rValue, _nType, _nScale );
|
|
_xParameter->setByte( nPos++, 0 );
|
|
}
|
|
}
|
|
|
|
::rtl::OUStringBuffer OKeySet::createKeyFilter()
|
|
{
|
|
static ::rtl::OUString aAnd(" AND ");
|
|
const ::rtl::OUString aQuote = getIdentifierQuoteString();
|
|
::rtl::OUStringBuffer aFilter;
|
|
// create the where clause
|
|
Reference<XDatabaseMetaData> xMeta = m_xConnection->getMetaData();
|
|
SelectColumnsMetaData::iterator aPosEnd = m_pKeyColumnNames->end();
|
|
for(SelectColumnsMetaData::iterator aPosIter = m_pKeyColumnNames->begin();aPosIter != aPosEnd;)
|
|
{
|
|
appendOneKeyColumnClause(::dbtools::quoteTableName( xMeta,aPosIter->second.sTableName,::dbtools::eInDataManipulation),
|
|
::dbtools::quoteName( aQuote,aPosIter->second.sRealName),
|
|
aFilter);
|
|
++aPosIter;
|
|
if(aPosIter != aPosEnd)
|
|
aFilter.append(aAnd);
|
|
}
|
|
return aFilter;
|
|
}
|
|
|
|
void OKeySet::construct(const Reference< XResultSet>& _xDriverSet,const ::rtl::OUString& i_sRowSetFilter)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::construct" );
|
|
OCacheSet::construct(_xDriverSet,i_sRowSetFilter);
|
|
initColumns();
|
|
|
|
Reference<XNameAccess> xKeyColumns = getKeyColumns();
|
|
Reference<XDatabaseMetaData> xMeta = m_xConnection->getMetaData();
|
|
Reference<XColumnsSupplier> xQueryColSup(m_xComposer,UNO_QUERY);
|
|
const Reference<XNameAccess> xQueryColumns = xQueryColSup->getColumns();
|
|
findTableColumnsMatching_throw(makeAny(m_xTable),m_sUpdateTableName,xMeta,xQueryColumns,m_pKeyColumnNames);
|
|
|
|
// the first row is empty because it's now easier for us to distinguish when we are beforefirst or first
|
|
// without extra variable to be set
|
|
m_aKeyMap.insert(OKeySetMatrix::value_type(0,OKeySetValue(NULL,::std::pair<sal_Int32,Reference<XRow> >(0,NULL))));
|
|
m_aKeyIter = m_aKeyMap.begin();
|
|
|
|
::rtl::OUStringBuffer aFilter = createKeyFilter();
|
|
|
|
Reference< XSingleSelectQueryComposer> xSourceComposer(m_xComposer,UNO_QUERY);
|
|
Reference< XMultiServiceFactory > xFactory(m_xConnection, UNO_QUERY_THROW);
|
|
Reference<XSingleSelectQueryComposer> xAnalyzer(xFactory->createInstance(SERVICE_NAME_SINGLESELECTQUERYCOMPOSER),UNO_QUERY);
|
|
xAnalyzer->setElementaryQuery(xSourceComposer->getElementaryQuery());
|
|
Reference<XTablesSupplier> xTabSup(xAnalyzer,uno::UNO_QUERY);
|
|
Reference<XNameAccess> xSelectTables(xTabSup->getTables(),uno::UNO_QUERY);
|
|
const Sequence< ::rtl::OUString> aSeq = xSelectTables->getElementNames();
|
|
if ( aSeq.getLength() > 1 ) // special handling for join
|
|
{
|
|
static ::rtl::OUString aAnd(" AND ");
|
|
const ::rtl::OUString aQuote = getIdentifierQuoteString();
|
|
const ::rtl::OUString* pIter = aSeq.getConstArray();
|
|
const ::rtl::OUString* pEnd = pIter + aSeq.getLength();
|
|
for(;pIter != pEnd;++pIter)
|
|
{
|
|
if ( *pIter != m_sUpdateTableName )
|
|
{
|
|
connectivity::OSQLTable xSelColSup(xSelectTables->getByName(*pIter),uno::UNO_QUERY);
|
|
Reference<XPropertySet> xProp(xSelColSup,uno::UNO_QUERY);
|
|
::rtl::OUString sSelectTableName = ::dbtools::composeTableName( xMeta, xProp, ::dbtools::eInDataManipulation, false, false, false );
|
|
|
|
::dbaccess::getColumnPositions(xQueryColumns,xSelColSup->getColumns()->getElementNames(),sSelectTableName,(*m_pForeignColumnNames));
|
|
|
|
const SelectColumnsMetaData::iterator aPosEnd = (*m_pForeignColumnNames).end();
|
|
for(SelectColumnsMetaData::iterator aPosIter = (*m_pForeignColumnNames).begin();aPosIter != aPosEnd;++aPosIter)
|
|
{
|
|
// look for columns not in the source columns to use them as filter as well
|
|
if ( aFilter.getLength() )
|
|
aFilter.append(aAnd);
|
|
appendOneKeyColumnClause(::dbtools::quoteName( aQuote,sSelectTableName),
|
|
::dbtools::quoteName( aQuote,aPosIter->second.sRealName),
|
|
aFilter);
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
executeStatement(aFilter,i_sRowSetFilter,xAnalyzer);
|
|
}
|
|
void OKeySet::executeStatement(::rtl::OUStringBuffer& io_aFilter,const ::rtl::OUString& i_sRowSetFilter,Reference<XSingleSelectQueryComposer>& io_xAnalyzer)
|
|
{
|
|
bool bFilterSet = !i_sRowSetFilter.isEmpty();
|
|
if ( bFilterSet )
|
|
{
|
|
FilterCreator aFilterCreator;
|
|
aFilterCreator.append( i_sRowSetFilter );
|
|
aFilterCreator.append( io_aFilter.makeStringAndClear() );
|
|
io_aFilter = aFilterCreator.getComposedAndClear();
|
|
}
|
|
io_xAnalyzer->setFilter(io_aFilter.makeStringAndClear());
|
|
if ( bFilterSet )
|
|
{
|
|
Sequence< Sequence< PropertyValue > > aFilter2 = io_xAnalyzer->getStructuredFilter();
|
|
const Sequence< PropertyValue >* pOr = aFilter2.getConstArray();
|
|
const Sequence< PropertyValue >* pOrEnd = pOr + aFilter2.getLength();
|
|
for(;pOr != pOrEnd;++pOr)
|
|
{
|
|
const PropertyValue* pAnd = pOr->getConstArray();
|
|
const PropertyValue* pAndEnd = pAnd + pOr->getLength();
|
|
for(;pAnd != pAndEnd;++pAnd)
|
|
{
|
|
::rtl::OUString sValue;
|
|
if ( !(pAnd->Value >>= sValue) || !( sValue == "?" || sValue.matchAsciiL( ":",1,0 ) ) )
|
|
{ // we have a criteria which has to be taken into account for updates
|
|
m_aFilterColumns.push_back(pAnd->Name);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
m_xStatement = m_xConnection->prepareStatement(io_xAnalyzer->getQueryWithSubstitution());
|
|
::comphelper::disposeComponent(io_xAnalyzer);
|
|
}
|
|
|
|
void OKeySet::invalidateRow()
|
|
{
|
|
m_xRow = NULL;
|
|
::comphelper::disposeComponent(m_xSet);
|
|
}
|
|
|
|
Any SAL_CALL OKeySet::getBookmark() throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::getBookmark" );
|
|
OSL_ENSURE(m_aKeyIter != m_aKeyMap.end() && m_aKeyIter != m_aKeyMap.begin(),
|
|
"getBookmark is only possible when we stand on a valid row!");
|
|
return makeAny(m_aKeyIter->first);
|
|
}
|
|
|
|
sal_Bool SAL_CALL OKeySet::moveToBookmark( const Any& bookmark ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::moveToBookmark" );
|
|
m_bInserted = m_bUpdated = m_bDeleted = sal_False;
|
|
m_aKeyIter = m_aKeyMap.find(::comphelper::getINT32(bookmark));
|
|
if (m_aKeyIter != m_aKeyMap.end())
|
|
refreshRow();
|
|
return m_aKeyIter != m_aKeyMap.end();
|
|
}
|
|
|
|
sal_Bool SAL_CALL OKeySet::moveRelativeToBookmark( const Any& bookmark, sal_Int32 rows ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::moveRelativeToBookmark" );
|
|
m_bInserted = m_bUpdated = m_bDeleted = sal_False;
|
|
m_aKeyIter = m_aKeyMap.find(::comphelper::getINT32(bookmark));
|
|
if(m_aKeyIter != m_aKeyMap.end())
|
|
{
|
|
return relative(rows);
|
|
}
|
|
|
|
invalidateRow();
|
|
return false;
|
|
}
|
|
|
|
sal_Int32 SAL_CALL OKeySet::compareBookmarks( const Any& _first, const Any& _second ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::compareBookmarks" );
|
|
sal_Int32 nFirst = 0, nSecond = 0;
|
|
_first >>= nFirst;
|
|
_second >>= nSecond;
|
|
|
|
return (nFirst != nSecond) ? CompareBookmark::NOT_EQUAL : CompareBookmark::EQUAL;
|
|
}
|
|
|
|
sal_Bool SAL_CALL OKeySet::hasOrderedBookmarks( ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::hasOrderedBookmarks" );
|
|
return sal_True;
|
|
}
|
|
|
|
sal_Int32 SAL_CALL OKeySet::hashBookmark( const Any& bookmark ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::hashBookmark" );
|
|
return ::comphelper::getINT32(bookmark);
|
|
}
|
|
|
|
// ::com::sun::star::sdbcx::XDeleteRows
|
|
Sequence< sal_Int32 > SAL_CALL OKeySet::deleteRows( const Sequence< Any >& rows ,const connectivity::OSQLTable& _xTable) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::deleteRows" );
|
|
Reference<XPropertySet> xSet(_xTable,UNO_QUERY);
|
|
fillTableName(xSet);
|
|
|
|
::rtl::OUStringBuffer aSql = ::rtl::OUString("DELETE FROM ");
|
|
aSql.append(m_aComposedTableName);
|
|
aSql.append(::rtl::OUString(" WHERE "));
|
|
|
|
// list all columns that should be set
|
|
const ::rtl::OUString aQuote = getIdentifierQuoteString();
|
|
static ::rtl::OUString aAnd(" AND ");
|
|
static ::rtl::OUString aOr(" OR ");
|
|
static ::rtl::OUString aEqual(" = ?");
|
|
|
|
|
|
// use keys and indexes for excat postioning
|
|
// first the keys
|
|
Reference<XNameAccess> xKeyColumns = getKeyColumns();
|
|
|
|
::rtl::OUStringBuffer aCondition = ::rtl::OUString("( ");
|
|
|
|
SelectColumnsMetaData::const_iterator aIter = (*m_pKeyColumnNames).begin();
|
|
SelectColumnsMetaData::const_iterator aPosEnd = (*m_pKeyColumnNames).end();
|
|
for(;aIter != aPosEnd;++aIter)
|
|
{
|
|
aCondition.append(::dbtools::quoteName( aQuote,aIter->second.sRealName));
|
|
aCondition.append(aEqual);
|
|
aCondition.append(aAnd);
|
|
}
|
|
aCondition.setLength(aCondition.getLength()-5);
|
|
const ::rtl::OUString sCon( aCondition.makeStringAndClear() );
|
|
|
|
const Any* pBegin = rows.getConstArray();
|
|
const Any* pEnd = pBegin + rows.getLength();
|
|
|
|
Sequence< Any > aKeys;
|
|
for(;pBegin != pEnd;++pBegin)
|
|
{
|
|
aSql.append(sCon);
|
|
aSql.append(aOr);
|
|
}
|
|
aSql.setLength(aSql.getLength()-3);
|
|
|
|
// now create end execute the prepared statement
|
|
|
|
Reference< XPreparedStatement > xPrep(m_xConnection->prepareStatement(aSql.makeStringAndClear()));
|
|
Reference< XParameters > xParameter(xPrep,UNO_QUERY);
|
|
|
|
pBegin = rows.getConstArray();
|
|
sal_Int32 i=1;
|
|
for(;pBegin != pEnd;++pBegin)
|
|
{
|
|
m_aKeyIter = m_aKeyMap.find(::comphelper::getINT32(*pBegin));
|
|
if(m_aKeyIter != m_aKeyMap.end())
|
|
{
|
|
connectivity::ORowVector< ORowSetValue >::Vector::iterator aKeyIter = m_aKeyIter->second.first->get().begin();
|
|
connectivity::ORowVector< ORowSetValue >::Vector::iterator aKeyEnd = m_aKeyIter->second.first->get().end();
|
|
SelectColumnsMetaData::const_iterator aPosIter = (*m_pKeyColumnNames).begin();
|
|
for(sal_uInt16 j = 0;aKeyIter != aKeyEnd;++aKeyIter,++j,++aPosIter)
|
|
{
|
|
setParameter(i++,xParameter,*aKeyIter,aPosIter->second.nType,aPosIter->second.nScale);
|
|
}
|
|
}
|
|
}
|
|
|
|
sal_Bool bOk = xPrep->executeUpdate() > 0;
|
|
Sequence< sal_Int32 > aRet(rows.getLength());
|
|
memset(aRet.getArray(),bOk,sizeof(sal_Int32)*aRet.getLength());
|
|
if(bOk)
|
|
{
|
|
pBegin = rows.getConstArray();
|
|
pEnd = pBegin + rows.getLength();
|
|
|
|
for(;pBegin != pEnd;++pBegin)
|
|
{
|
|
sal_Int32 nPos = 0;
|
|
*pBegin >>= nPos;
|
|
if(m_aKeyIter == m_aKeyMap.find(nPos) && m_aKeyIter != m_aKeyMap.end())
|
|
++m_aKeyIter;
|
|
m_aKeyMap.erase(nPos);
|
|
m_bDeleted = sal_True;
|
|
}
|
|
}
|
|
return aRet;
|
|
}
|
|
|
|
void SAL_CALL OKeySet::updateRow(const ORowSetRow& _rInsertRow ,const ORowSetRow& _rOrginalRow,const connectivity::OSQLTable& _xTable ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::updateRow" );
|
|
Reference<XPropertySet> xSet(_xTable,UNO_QUERY);
|
|
fillTableName(xSet);
|
|
|
|
::rtl::OUStringBuffer aSql = ::rtl::OUString("UPDATE ");
|
|
aSql.append(m_aComposedTableName);
|
|
aSql.append(::rtl::OUString(" SET "));
|
|
// list all cloumns that should be set
|
|
static ::rtl::OUString aPara(" = ?,");
|
|
::rtl::OUString aQuote = getIdentifierQuoteString();
|
|
static ::rtl::OUString aAnd(" AND ");
|
|
::rtl::OUString sIsNull(" IS NULL");
|
|
::rtl::OUString sParam(" = ?");
|
|
|
|
// use keys and indexes for excat postioning
|
|
// first the keys
|
|
Reference<XNameAccess> xKeyColumns = getKeyColumns();
|
|
|
|
// second the indexes
|
|
Reference<XIndexesSupplier> xIndexSup(_xTable,UNO_QUERY);
|
|
Reference<XIndexAccess> xIndexes;
|
|
if ( xIndexSup.is() )
|
|
xIndexes.set(xIndexSup->getIndexes(),UNO_QUERY);
|
|
|
|
|
|
::std::vector< Reference<XNameAccess> > aAllIndexColumns;
|
|
lcl_fillIndexColumns(xIndexes,aAllIndexColumns);
|
|
|
|
::rtl::OUString aColumnName;
|
|
::rtl::OUStringBuffer sKeyCondition,sIndexCondition;
|
|
::std::vector<sal_Int32> aIndexColumnPositions;
|
|
|
|
const sal_Int32 nOldLength = aSql.getLength();
|
|
sal_Int32 i = 1;
|
|
// here we build the condition part for the update statement
|
|
SelectColumnsMetaData::const_iterator aIter = m_pColumnNames->begin();
|
|
SelectColumnsMetaData::const_iterator aEnd = m_pColumnNames->end();
|
|
for(;aIter != aEnd;++aIter,++i)
|
|
{
|
|
if ( m_pKeyColumnNames->find(aIter->first) != m_pKeyColumnNames->end() )
|
|
{
|
|
sKeyCondition.append(::dbtools::quoteName( aQuote,aIter->second.sRealName));
|
|
if((_rOrginalRow->get())[aIter->second.nPosition].isNull())
|
|
sKeyCondition.append(sIsNull);
|
|
else
|
|
sKeyCondition.append(sParam);
|
|
sKeyCondition.append(aAnd);
|
|
}
|
|
else
|
|
{
|
|
::std::vector< Reference<XNameAccess> >::const_iterator aIndexEnd = aAllIndexColumns.end();
|
|
for( ::std::vector< Reference<XNameAccess> >::const_iterator aIndexIter = aAllIndexColumns.begin();
|
|
aIndexIter != aIndexEnd;++aIndexIter)
|
|
{
|
|
if((*aIndexIter)->hasByName(aIter->first))
|
|
{
|
|
sIndexCondition.append(::dbtools::quoteName( aQuote,aIter->second.sRealName));
|
|
if((_rOrginalRow->get())[aIter->second.nPosition].isNull())
|
|
sIndexCondition.append(sIsNull);
|
|
else
|
|
{
|
|
sIndexCondition.append(sParam);
|
|
aIndexColumnPositions.push_back(aIter->second.nPosition);
|
|
}
|
|
sIndexCondition.append(aAnd);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
if((_rInsertRow->get())[aIter->second.nPosition].isModified())
|
|
{
|
|
aSql.append(::dbtools::quoteName( aQuote,aIter->second.sRealName));
|
|
aSql.append(aPara);
|
|
}
|
|
}
|
|
|
|
if( aSql.getLength() != nOldLength )
|
|
{
|
|
aSql.setLength(aSql.getLength()-1);
|
|
}
|
|
else
|
|
::dbtools::throwSQLException( DBACORE_RESSTRING( RID_STR_NO_VALUE_CHANGED ), SQL_GENERAL_ERROR, m_xConnection );
|
|
|
|
if(sKeyCondition.getLength() || sIndexCondition.getLength())
|
|
{
|
|
aSql.append(::rtl::OUString(" WHERE "));
|
|
if(sKeyCondition.getLength() && sIndexCondition.getLength())
|
|
{
|
|
aSql.append(sKeyCondition.makeStringAndClear());
|
|
aSql.append(sIndexCondition.makeStringAndClear());
|
|
}
|
|
else if(sKeyCondition.getLength())
|
|
{
|
|
aSql.append(sKeyCondition.makeStringAndClear());
|
|
}
|
|
else if(sIndexCondition.getLength())
|
|
{
|
|
aSql.append(sIndexCondition.makeStringAndClear());
|
|
}
|
|
aSql.setLength(aSql.getLength()-5); // remove the last AND
|
|
}
|
|
else
|
|
::dbtools::throwSQLException( DBACORE_RESSTRING( RID_STR_NO_CONDITION_FOR_PK ), SQL_GENERAL_ERROR, m_xConnection );
|
|
|
|
// now create end execute the prepared statement
|
|
::rtl::OUString sEmpty;
|
|
executeUpdate(_rInsertRow ,_rOrginalRow,aSql.makeStringAndClear(),sEmpty,aIndexColumnPositions);
|
|
}
|
|
|
|
void OKeySet::executeUpdate(const ORowSetRow& _rInsertRow ,const ORowSetRow& _rOrginalRow,const ::rtl::OUString& i_sSQL,const ::rtl::OUString& i_sTableName,const ::std::vector<sal_Int32>& _aIndexColumnPositions)
|
|
{
|
|
// now create end execute the prepared statement
|
|
Reference< XPreparedStatement > xPrep(m_xConnection->prepareStatement(i_sSQL));
|
|
Reference< XParameters > xParameter(xPrep,UNO_QUERY);
|
|
|
|
bool bRefetch = true;
|
|
Reference<XRow> xRow;
|
|
sal_Int32 i = 1;
|
|
// first the set values
|
|
SelectColumnsMetaData::const_iterator aIter = m_pColumnNames->begin();
|
|
SelectColumnsMetaData::const_iterator aEnd = m_pColumnNames->end();
|
|
sal_uInt16 j = 0;
|
|
for(;aIter != aEnd;++aIter,++j)
|
|
{
|
|
if ( i_sTableName.isEmpty() || aIter->second.sTableName == i_sTableName )
|
|
{
|
|
sal_Int32 nPos = aIter->second.nPosition;
|
|
if((_rInsertRow->get())[nPos].isModified())
|
|
{
|
|
if ( bRefetch )
|
|
{
|
|
bRefetch = ::std::find(m_aFilterColumns.begin(),m_aFilterColumns.end(),aIter->second.sRealName) == m_aFilterColumns.end();
|
|
}
|
|
impl_convertValue_throw(_rInsertRow,aIter->second);
|
|
(_rInsertRow->get())[nPos].setSigned((_rOrginalRow->get())[nPos].isSigned());
|
|
setParameter(i++,xParameter,(_rInsertRow->get())[nPos],aIter->second.nType,aIter->second.nScale);
|
|
}
|
|
}
|
|
}
|
|
// and then the values of the where condition
|
|
aIter = m_pKeyColumnNames->begin();
|
|
aEnd = m_pKeyColumnNames->end();
|
|
j = 0;
|
|
for(;aIter != aEnd;++aIter,++j)
|
|
{
|
|
if ( i_sTableName.isEmpty() || aIter->second.sTableName == i_sTableName )
|
|
{
|
|
setParameter(i++,xParameter,(_rOrginalRow->get())[aIter->second.nPosition],aIter->second.nType,aIter->second.nScale);
|
|
}
|
|
}
|
|
if ( !_aIndexColumnPositions.empty() )
|
|
{
|
|
// now we have to set the index values
|
|
::std::vector<sal_Int32>::const_iterator aIdxColIter = _aIndexColumnPositions.begin();
|
|
::std::vector<sal_Int32>::const_iterator aIdxColEnd = _aIndexColumnPositions.end();
|
|
j = 0;
|
|
aIter = m_pColumnNames->begin();
|
|
for(;aIdxColIter != aIdxColEnd;++aIdxColIter,++i,++j,++aIter)
|
|
{
|
|
setParameter(i,xParameter,(_rOrginalRow->get())[*aIdxColIter],(_rOrginalRow->get())[*aIdxColIter].getTypeKind(),aIter->second.nScale);
|
|
}
|
|
}
|
|
const sal_Int32 nRowsUpdated = xPrep->executeUpdate();
|
|
m_bUpdated = nRowsUpdated > 0;
|
|
if(m_bUpdated)
|
|
{
|
|
const sal_Int32 nBookmark = ::comphelper::getINT32((_rInsertRow->get())[0].getAny());
|
|
m_aKeyIter = m_aKeyMap.find(nBookmark);
|
|
m_aKeyIter->second.second.first = 2;
|
|
m_aKeyIter->second.second.second = xRow;
|
|
copyRowValue(_rInsertRow,m_aKeyIter->second.first,nBookmark);
|
|
tryRefetch(_rInsertRow,bRefetch);
|
|
}
|
|
}
|
|
|
|
void SAL_CALL OKeySet::insertRow( const ORowSetRow& _rInsertRow,const connectivity::OSQLTable& _xTable ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::insertRow" );
|
|
::rtl::OUStringBuffer aSql(::rtl::OUString("INSERT INTO "));
|
|
Reference<XPropertySet> xSet(_xTable,UNO_QUERY);
|
|
fillTableName(xSet);
|
|
|
|
aSql.append(m_aComposedTableName);
|
|
aSql.append(::rtl::OUString(" ( "));
|
|
// set values and column names
|
|
::rtl::OUStringBuffer aValues(::rtl::OUString(" VALUES ( "));
|
|
static ::rtl::OUString aPara("?,");
|
|
::rtl::OUString aQuote = getIdentifierQuoteString();
|
|
static ::rtl::OUString aComma(",");
|
|
|
|
SelectColumnsMetaData::const_iterator aIter = m_pColumnNames->begin();
|
|
SelectColumnsMetaData::const_iterator aEnd = m_pColumnNames->end();
|
|
sal_Int32 j = 1;
|
|
bool bRefetch = true;
|
|
sal_Bool bModified = sal_False;
|
|
for(;aIter != aEnd;++aIter,++j)
|
|
{
|
|
if((_rInsertRow->get())[aIter->second.nPosition].isModified())
|
|
{
|
|
if ( bRefetch )
|
|
{
|
|
bRefetch = ::std::find(m_aFilterColumns.begin(),m_aFilterColumns.end(),aIter->second.sRealName) == m_aFilterColumns.end();
|
|
}
|
|
aSql.append(::dbtools::quoteName( aQuote,aIter->second.sRealName));
|
|
aSql.append(aComma);
|
|
aValues.append(aPara);
|
|
bModified = sal_True;
|
|
}
|
|
}
|
|
if ( !bModified )
|
|
::dbtools::throwSQLException( DBACORE_RESSTRING( RID_STR_NO_VALUE_CHANGED ), SQL_GENERAL_ERROR, m_xConnection );
|
|
|
|
aSql[aSql.getLength() - 1] = ')';
|
|
aValues[aValues.getLength() - 1] = ')';
|
|
aSql.append(aValues.makeStringAndClear());
|
|
// now create,fill and execute the prepared statement
|
|
::rtl::OUString sEmpty;
|
|
executeInsert(_rInsertRow,aSql.makeStringAndClear(),sEmpty,bRefetch);
|
|
}
|
|
|
|
void OKeySet::executeInsert( const ORowSetRow& _rInsertRow,const ::rtl::OUString& i_sSQL,const ::rtl::OUString& i_sTableName,bool bRefetch )
|
|
{
|
|
// now create,fill and execute the prepared statement
|
|
Reference< XPreparedStatement > xPrep(m_xConnection->prepareStatement(i_sSQL));
|
|
Reference< XParameters > xParameter(xPrep,UNO_QUERY);
|
|
|
|
SelectColumnsMetaData::const_iterator aIter = m_pColumnNames->begin();
|
|
SelectColumnsMetaData::const_iterator aEnd = m_pColumnNames->end();
|
|
for(sal_Int32 i = 1;aIter != aEnd;++aIter)
|
|
{
|
|
if ( i_sTableName.isEmpty() || aIter->second.sTableName == i_sTableName )
|
|
{
|
|
const sal_Int32 nPos = aIter->second.nPosition;
|
|
if((_rInsertRow->get())[nPos].isModified())
|
|
{
|
|
if((_rInsertRow->get())[nPos].isNull())
|
|
xParameter->setNull(i++,(_rInsertRow->get())[nPos].getTypeKind());
|
|
else
|
|
{
|
|
impl_convertValue_throw(_rInsertRow,aIter->second);
|
|
(_rInsertRow->get())[nPos].setSigned(m_aSignedFlags[nPos-1]);
|
|
setParameter(i++,xParameter,(_rInsertRow->get())[nPos],aIter->second.nType,aIter->second.nScale);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
m_bInserted = xPrep->executeUpdate() > 0;
|
|
sal_Bool bAutoValuesFetched = sal_False;
|
|
if ( m_bInserted )
|
|
{
|
|
// first insert the default values into the insertrow
|
|
aIter = m_pColumnNames->begin();
|
|
for(;aIter != aEnd;++aIter)
|
|
{
|
|
if ( !(_rInsertRow->get())[aIter->second.nPosition].isModified() )
|
|
(_rInsertRow->get())[aIter->second.nPosition] = aIter->second.sDefaultValue;
|
|
}
|
|
try
|
|
{
|
|
Reference< XGeneratedResultSet > xGRes(xPrep, UNO_QUERY);
|
|
if ( xGRes.is() )
|
|
{
|
|
Reference< XResultSet > xRes = xGRes->getGeneratedValues();
|
|
Reference< XRow > xRow(xRes,UNO_QUERY);
|
|
if ( xRow.is() && xRes->next() )
|
|
{
|
|
Reference< XResultSetMetaDataSupplier > xMdSup(xRes,UNO_QUERY);
|
|
Reference< XResultSetMetaData > xMd = xMdSup->getMetaData();
|
|
sal_Int32 nColumnCount = xMd->getColumnCount();
|
|
::std::vector< ::rtl::OUString >::iterator aAutoIter = m_aAutoColumns.begin();
|
|
::std::vector< ::rtl::OUString >::iterator aAutoEnd = m_aAutoColumns.end();
|
|
for (sal_Int32 i = 1;aAutoIter != aAutoEnd && i <= nColumnCount; ++aAutoIter,++i)
|
|
{
|
|
#if OSL_DEBUG_LEVEL > 1
|
|
::rtl::OUString sColumnName( xMd->getColumnName(i) );
|
|
#endif
|
|
SelectColumnsMetaData::iterator aFind = m_pKeyColumnNames->find(*aAutoIter);
|
|
if ( aFind != m_pKeyColumnNames->end() )
|
|
(_rInsertRow->get())[aFind->second.nPosition].fill(i, aFind->second.nType, xRow);
|
|
}
|
|
bAutoValuesFetched = sal_True;
|
|
}
|
|
}
|
|
}
|
|
catch(const Exception&)
|
|
{
|
|
OSL_FAIL("Could not execute GeneratedKeys() stmt");
|
|
}
|
|
}
|
|
|
|
::comphelper::disposeComponent(xPrep);
|
|
|
|
if ( i_sTableName.isEmpty() && !bAutoValuesFetched && m_bInserted )
|
|
{
|
|
// first check if all key column values were set
|
|
const ::rtl::OUString sMax(" MAX(");
|
|
const ::rtl::OUString sMaxEnd("),");
|
|
const ::rtl::OUString sQuote = getIdentifierQuoteString();
|
|
::rtl::OUString sMaxStmt;
|
|
aEnd = m_pKeyColumnNames->end();
|
|
::std::vector< ::rtl::OUString >::iterator aAutoIter = m_aAutoColumns.begin();
|
|
::std::vector< ::rtl::OUString >::iterator aAutoEnd = m_aAutoColumns.end();
|
|
for (;aAutoIter != aAutoEnd; ++aAutoIter)
|
|
{
|
|
// we will only fetch values which are keycolumns
|
|
SelectColumnsMetaData::iterator aFind = m_pKeyColumnNames->find(*aAutoIter);
|
|
if ( aFind != aEnd )
|
|
{
|
|
sMaxStmt += sMax;
|
|
sMaxStmt += ::dbtools::quoteName( sQuote,aFind->second.sRealName
|
|
);
|
|
sMaxStmt += sMaxEnd;
|
|
}
|
|
}
|
|
|
|
if(!sMaxStmt.isEmpty())
|
|
{
|
|
sMaxStmt = sMaxStmt.replaceAt(sMaxStmt.getLength()-1,1,::rtl::OUString(" "));
|
|
::rtl::OUString sStmt = ::rtl::OUString("SELECT ");
|
|
sStmt += sMaxStmt;
|
|
sStmt += ::rtl::OUString("FROM ");
|
|
::rtl::OUString sCatalog,sSchema,sTable;
|
|
::dbtools::qualifiedNameComponents(m_xConnection->getMetaData(),m_sUpdateTableName,sCatalog,sSchema,sTable,::dbtools::eInDataManipulation);
|
|
sStmt += ::dbtools::composeTableNameForSelect( m_xConnection, sCatalog, sSchema, sTable );
|
|
try
|
|
{
|
|
// now fetch the autoincrement values
|
|
Reference<XStatement> xStatement = m_xConnection->createStatement();
|
|
Reference<XResultSet> xRes = xStatement->executeQuery(sStmt);
|
|
Reference<XRow> xRow(xRes,UNO_QUERY);
|
|
if(xRow.is() && xRes->next())
|
|
{
|
|
aAutoIter = m_aAutoColumns.begin();
|
|
for (sal_Int32 i=1;aAutoIter != aAutoEnd; ++aAutoIter,++i)
|
|
{
|
|
// we will only fetch values which are keycolumns
|
|
SelectColumnsMetaData::iterator aFind = m_pKeyColumnNames->find(*aAutoIter);
|
|
if ( aFind != aEnd )
|
|
(_rInsertRow->get())[aFind->second.nPosition].fill(i, aFind->second.nType, xRow);
|
|
}
|
|
}
|
|
::comphelper::disposeComponent(xStatement);
|
|
}
|
|
catch(SQLException&)
|
|
{
|
|
OSL_FAIL("Could not fetch with MAX() ");
|
|
}
|
|
}
|
|
}
|
|
if ( m_bInserted )
|
|
{
|
|
OKeySetMatrix::iterator aKeyIter = m_aKeyMap.end();
|
|
--aKeyIter;
|
|
ORowSetRow aKeyRow = new connectivity::ORowVector< ORowSetValue >(m_pKeyColumnNames->size());
|
|
copyRowValue(_rInsertRow,aKeyRow,aKeyIter->first + 1);
|
|
|
|
m_aKeyIter = m_aKeyMap.insert(OKeySetMatrix::value_type(aKeyIter->first + 1,OKeySetValue(aKeyRow,::std::pair<sal_Int32,Reference<XRow> >(1,NULL)))).first;
|
|
// now we set the bookmark for this row
|
|
(_rInsertRow->get())[0] = makeAny((sal_Int32)m_aKeyIter->first);
|
|
tryRefetch(_rInsertRow,bRefetch);
|
|
}
|
|
}
|
|
void OKeySet::tryRefetch(const ORowSetRow& _rInsertRow,bool bRefetch)
|
|
{
|
|
if ( bRefetch )
|
|
{
|
|
try
|
|
{
|
|
bRefetch = doTryRefetch_throw();
|
|
}
|
|
catch(const Exception&)
|
|
{
|
|
bRefetch = false;
|
|
}
|
|
}
|
|
if ( !bRefetch )
|
|
{
|
|
m_aKeyIter->second.second.second = new OPrivateRow(_rInsertRow->get());
|
|
}
|
|
}
|
|
|
|
void OKeySet::copyRowValue(const ORowSetRow& _rInsertRow,ORowSetRow& _rKeyRow,sal_Int32 i_nBookmark)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::copyRowValue" );
|
|
connectivity::ORowVector< ORowSetValue >::Vector::iterator aIter = _rKeyRow->get().begin();
|
|
|
|
// check the if the parameter values have been changed
|
|
OSL_ENSURE((m_aParameterValueForCache.get().size()-1) == m_pParameterNames->size(),"OKeySet::copyRowValue: Parameter values and names differ!");
|
|
connectivity::ORowVector< ORowSetValue >::Vector::const_iterator aParaValuesIter = m_aParameterValueForCache.get().begin() +1;
|
|
|
|
bool bChanged = false;
|
|
SelectColumnsMetaData::const_iterator aParaIter = (*m_pParameterNames).begin();
|
|
SelectColumnsMetaData::const_iterator aParaEnd = (*m_pParameterNames).end();
|
|
for(sal_Int32 i = 1;aParaIter != aParaEnd;++aParaIter,++aParaValuesIter,++i)
|
|
{
|
|
ORowSetValue aValue(*aParaValuesIter);
|
|
aValue.setSigned(m_aSignedFlags[aParaIter->second.nPosition]);
|
|
if ( (_rInsertRow->get())[aParaIter->second.nPosition] != aValue )
|
|
{
|
|
ORowSetValueVector aCopy(m_aParameterValueForCache);
|
|
(aCopy.get())[i] = (_rInsertRow->get())[aParaIter->second.nPosition];
|
|
m_aUpdatedParameter[i_nBookmark] = aCopy;
|
|
bChanged = true;
|
|
}
|
|
}
|
|
if ( !bChanged )
|
|
{
|
|
m_aUpdatedParameter.erase(i_nBookmark);
|
|
}
|
|
|
|
// update the key values
|
|
SelectColumnsMetaData::const_iterator aPosIter = (*m_pKeyColumnNames).begin();
|
|
SelectColumnsMetaData::const_iterator aPosEnd = (*m_pKeyColumnNames).end();
|
|
for(;aPosIter != aPosEnd;++aPosIter,++aIter)
|
|
{
|
|
impl_convertValue_throw(_rInsertRow,aPosIter->second);
|
|
*aIter = (_rInsertRow->get())[aPosIter->second.nPosition];
|
|
aIter->setTypeKind(aPosIter->second.nType);
|
|
}
|
|
}
|
|
|
|
void SAL_CALL OKeySet::deleteRow(const ORowSetRow& _rDeleteRow,const connectivity::OSQLTable& _xTable ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::deleteRow" );
|
|
Reference<XPropertySet> xSet(_xTable,UNO_QUERY);
|
|
fillTableName(xSet);
|
|
|
|
::rtl::OUStringBuffer aSql = ::rtl::OUString("DELETE FROM ");
|
|
aSql.append(m_aComposedTableName);
|
|
aSql.append(::rtl::OUString(" WHERE "));
|
|
|
|
// list all cloumns that should be set
|
|
::rtl::OUString aQuote = getIdentifierQuoteString();
|
|
static ::rtl::OUString aAnd(" AND ");
|
|
|
|
// use keys and indexes for excat postioning
|
|
Reference<XNameAccess> xKeyColumns = getKeyColumns();
|
|
// second the indexes
|
|
Reference<XIndexesSupplier> xIndexSup(_xTable,UNO_QUERY);
|
|
Reference<XIndexAccess> xIndexes;
|
|
if ( xIndexSup.is() )
|
|
xIndexes.set(xIndexSup->getIndexes(),UNO_QUERY);
|
|
|
|
// Reference<XColumnsSupplier>
|
|
::std::vector< Reference<XNameAccess> > aAllIndexColumns;
|
|
lcl_fillIndexColumns(xIndexes,aAllIndexColumns);
|
|
|
|
::rtl::OUString aColumnName;
|
|
::rtl::OUStringBuffer sIndexCondition;
|
|
::std::vector<sal_Int32> aIndexColumnPositions;
|
|
SelectColumnsMetaData::const_iterator aIter = m_pColumnNames->begin();
|
|
SelectColumnsMetaData::const_iterator aEnd = m_pColumnNames->end();
|
|
|
|
sal_Int32 i = 1;
|
|
for(i = 1;aIter != aEnd;++aIter,++i)
|
|
{
|
|
if ( m_pKeyColumnNames->find(aIter->first) != m_pKeyColumnNames->end() )
|
|
{
|
|
aSql.append(::dbtools::quoteName( aQuote,aIter->second.sRealName));
|
|
if((_rDeleteRow->get())[aIter->second.nPosition].isNull())
|
|
{
|
|
OSL_FAIL("can a primary key be null");
|
|
aSql.append(::rtl::OUString(" IS NULL"));
|
|
}
|
|
else
|
|
aSql.append(::rtl::OUString(" = ?"));
|
|
aSql.append(aAnd);
|
|
}
|
|
else
|
|
{
|
|
::std::vector< Reference<XNameAccess> >::const_iterator aIndexEnd = aAllIndexColumns.end();
|
|
for( ::std::vector< Reference<XNameAccess> >::const_iterator aIndexIter = aAllIndexColumns.begin();
|
|
aIndexIter != aIndexEnd;++aIndexIter)
|
|
{
|
|
if((*aIndexIter)->hasByName(aIter->first))
|
|
{
|
|
sIndexCondition.append(::dbtools::quoteName( aQuote,aIter->second.sRealName));
|
|
if((_rDeleteRow->get())[aIter->second.nPosition].isNull())
|
|
sIndexCondition.append(::rtl::OUString(" IS NULL"));
|
|
else
|
|
{
|
|
sIndexCondition.append(::rtl::OUString(" = ?"));
|
|
aIndexColumnPositions.push_back(aIter->second.nPosition);
|
|
}
|
|
sIndexCondition.append(aAnd);
|
|
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
aSql.append(sIndexCondition.makeStringAndClear());
|
|
aSql.setLength(aSql.getLength()-5);
|
|
|
|
// now create end execute the prepared statement
|
|
Reference< XPreparedStatement > xPrep(m_xConnection->prepareStatement(aSql.makeStringAndClear()));
|
|
Reference< XParameters > xParameter(xPrep,UNO_QUERY);
|
|
|
|
aIter = (*m_pKeyColumnNames).begin();
|
|
aEnd = (*m_pKeyColumnNames).end();
|
|
i = 1;
|
|
for(;aIter != aEnd;++aIter,++i)
|
|
{
|
|
setParameter(i,xParameter,(_rDeleteRow->get())[aIter->second.nPosition],aIter->second.nType,aIter->second.nScale);
|
|
}
|
|
|
|
// now we have to set the index values
|
|
::std::vector<sal_Int32>::iterator aIdxColIter = aIndexColumnPositions.begin();
|
|
::std::vector<sal_Int32>::iterator aIdxColEnd = aIndexColumnPositions.end();
|
|
aIter = m_pColumnNames->begin();
|
|
for(;aIdxColIter != aIdxColEnd;++aIdxColIter,++i,++aIter)
|
|
{
|
|
setParameter(i,xParameter,(_rDeleteRow->get())[*aIdxColIter],(_rDeleteRow->get())[*aIdxColIter].getTypeKind(),aIter->second.nScale);
|
|
}
|
|
|
|
m_bDeleted = xPrep->executeUpdate() > 0;
|
|
|
|
if(m_bDeleted)
|
|
{
|
|
sal_Int32 nBookmark = ::comphelper::getINT32((_rDeleteRow->get())[0].getAny());
|
|
if(m_aKeyIter == m_aKeyMap.find(nBookmark) && m_aKeyIter != m_aKeyMap.end())
|
|
++m_aKeyIter;
|
|
m_aKeyMap.erase(nBookmark);
|
|
m_bDeleted = sal_True;
|
|
}
|
|
}
|
|
|
|
void SAL_CALL OKeySet::cancelRowUpdates( ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::cancelRowUpdates" );
|
|
m_bInserted = m_bUpdated = m_bDeleted = sal_False;
|
|
}
|
|
|
|
void SAL_CALL OKeySet::moveToInsertRow( ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::moveToInsertRow" );
|
|
}
|
|
|
|
void SAL_CALL OKeySet::moveToCurrentRow( ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::moveToCurrentRow" );
|
|
}
|
|
|
|
Reference<XNameAccess> OKeySet::getKeyColumns() const
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::getKeyColumns" );
|
|
// use keys and indexes for excat postioning
|
|
// first the keys
|
|
|
|
Reference<XIndexAccess> xKeys = m_xTableKeys;
|
|
if ( !xKeys.is() )
|
|
{
|
|
Reference<XPropertySet> xSet(m_xTable,UNO_QUERY);
|
|
const Reference<XNameAccess> xPrimaryKeyColumns = getPrimaryKeyColumns_throw(xSet);
|
|
return xPrimaryKeyColumns;
|
|
}
|
|
|
|
Reference<XColumnsSupplier> xKeyColsSup;
|
|
Reference<XNameAccess> xKeyColumns;
|
|
if(xKeys.is())
|
|
{
|
|
Reference<XPropertySet> xProp;
|
|
sal_Int32 nCount = xKeys->getCount();
|
|
for(sal_Int32 i = 0;i< nCount;++i)
|
|
{
|
|
xProp.set(xKeys->getByIndex(i),UNO_QUERY);
|
|
if ( xProp.is() )
|
|
{
|
|
sal_Int32 nKeyType = 0;
|
|
xProp->getPropertyValue(PROPERTY_TYPE) >>= nKeyType;
|
|
if(KeyType::PRIMARY == nKeyType)
|
|
{
|
|
xKeyColsSup.set(xProp,UNO_QUERY);
|
|
OSL_ENSURE(xKeyColsSup.is(),"Columnsupplier is null!");
|
|
xKeyColumns = xKeyColsSup->getColumns();
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
return xKeyColumns;
|
|
}
|
|
|
|
sal_Bool SAL_CALL OKeySet::next( ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::next" );
|
|
m_bInserted = m_bUpdated = m_bDeleted = sal_False;
|
|
|
|
if(isAfterLast())
|
|
return sal_False;
|
|
++m_aKeyIter;
|
|
if(!m_bRowCountFinal && m_aKeyIter == m_aKeyMap.end())
|
|
{
|
|
// not yet all records fetched, but we reached the end of those we fetched
|
|
// try to fetch one more row
|
|
if (fetchRow())
|
|
{
|
|
OSL_ENSURE(!isAfterLast(), "fetchRow succeeded, but isAfterLast()");
|
|
return true;
|
|
}
|
|
else
|
|
{
|
|
// nope, we arrived at end of data
|
|
m_aKeyIter = m_aKeyMap.end();
|
|
OSL_ENSURE(isAfterLast(), "fetchRow failed, but not end of data");
|
|
}
|
|
}
|
|
|
|
refreshRow();
|
|
return !isAfterLast();
|
|
}
|
|
|
|
sal_Bool SAL_CALL OKeySet::isBeforeFirst( ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::isBeforeFirst" );
|
|
return m_aKeyIter == m_aKeyMap.begin();
|
|
}
|
|
|
|
sal_Bool SAL_CALL OKeySet::isAfterLast( ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::isAfterLast" );
|
|
return m_bRowCountFinal && m_aKeyIter == m_aKeyMap.end();
|
|
}
|
|
|
|
sal_Bool SAL_CALL OKeySet::isFirst( ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::isFirst" );
|
|
OKeySetMatrix::iterator aTemp = m_aKeyMap.begin();
|
|
++aTemp;
|
|
return m_aKeyIter == aTemp && m_aKeyIter != m_aKeyMap.end();
|
|
}
|
|
|
|
sal_Bool SAL_CALL OKeySet::isLast( ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::isLast" );
|
|
if(!m_bRowCountFinal)
|
|
return sal_False;
|
|
|
|
OKeySetMatrix::iterator aTemp = m_aKeyMap.end();
|
|
--aTemp;
|
|
return m_aKeyIter == aTemp;
|
|
}
|
|
|
|
void SAL_CALL OKeySet::beforeFirst( ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::beforeFirst" );
|
|
m_bInserted = m_bUpdated = m_bDeleted = sal_False;
|
|
m_aKeyIter = m_aKeyMap.begin();
|
|
invalidateRow();
|
|
}
|
|
|
|
void SAL_CALL OKeySet::afterLast( ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::afterLast" );
|
|
m_bInserted = m_bUpdated = m_bDeleted = sal_False;
|
|
fillAllRows();
|
|
m_aKeyIter = m_aKeyMap.end();
|
|
invalidateRow();
|
|
}
|
|
|
|
sal_Bool SAL_CALL OKeySet::first( ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::first" );
|
|
m_bInserted = m_bUpdated = m_bDeleted = sal_False;
|
|
m_aKeyIter = m_aKeyMap.begin();
|
|
++m_aKeyIter;
|
|
if(m_aKeyIter == m_aKeyMap.end())
|
|
{
|
|
if (!fetchRow())
|
|
{
|
|
m_aKeyIter = m_aKeyMap.end();
|
|
return false;
|
|
}
|
|
}
|
|
else
|
|
refreshRow();
|
|
return m_aKeyIter != m_aKeyMap.end() && m_aKeyIter != m_aKeyMap.begin();
|
|
}
|
|
|
|
sal_Bool SAL_CALL OKeySet::last( ) throw(SQLException, RuntimeException)
|
|
{
|
|
return last_checked(sal_True);
|
|
}
|
|
|
|
sal_Bool OKeySet::last_checked( sal_Bool i_bFetchRow)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::last_checked" );
|
|
m_bInserted = m_bUpdated = m_bDeleted = sal_False;
|
|
bool fetchedRow = fillAllRows();
|
|
|
|
m_aKeyIter = m_aKeyMap.end();
|
|
--m_aKeyIter;
|
|
if ( !fetchedRow )
|
|
{
|
|
if ( i_bFetchRow )
|
|
refreshRow();
|
|
else
|
|
invalidateRow();
|
|
}
|
|
return m_aKeyIter != m_aKeyMap.end() && m_aKeyIter != m_aKeyMap.begin();
|
|
}
|
|
|
|
sal_Int32 SAL_CALL OKeySet::getRow( ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::getRow" );
|
|
OSL_ENSURE(!isAfterLast(),"getRow is not allowed when afterlast record!");
|
|
OSL_ENSURE(!isBeforeFirst(),"getRow is not allowed when beforefirst record!");
|
|
|
|
return ::std::distance(m_aKeyMap.begin(),m_aKeyIter);
|
|
}
|
|
|
|
sal_Bool SAL_CALL OKeySet::absolute( sal_Int32 row ) throw(SQLException, RuntimeException)
|
|
{
|
|
return absolute_checked(row,sal_True);
|
|
}
|
|
sal_Bool OKeySet::absolute_checked( sal_Int32 row,sal_Bool i_bFetchRow )
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::absolute" );
|
|
m_bInserted = m_bUpdated = m_bDeleted = sal_False;
|
|
OSL_ENSURE(row,"absolute(0) isn't allowed!");
|
|
bool fetchedRow = false;
|
|
if(row < 0)
|
|
{
|
|
if(!m_bRowCountFinal)
|
|
fetchedRow = fillAllRows();
|
|
|
|
for(;row < 0 && m_aKeyIter != m_aKeyMap.begin();++row)
|
|
--m_aKeyIter;
|
|
}
|
|
else
|
|
{
|
|
if(row >= (sal_Int32)m_aKeyMap.size())
|
|
{
|
|
// we don't have this row
|
|
if(!m_bRowCountFinal)
|
|
{
|
|
// but there may still be rows to fetch.
|
|
sal_Bool bNext = sal_True;
|
|
for(sal_Int32 i=m_aKeyMap.size()-1;i < row && bNext;++i)
|
|
bNext = fetchRow();
|
|
// it is guaranteed that the above loop has executed at least once,
|
|
// that is fetchRow called at least once.
|
|
if ( bNext )
|
|
{
|
|
fetchedRow = true;
|
|
}
|
|
else
|
|
{
|
|
// reached end of data before desired row
|
|
m_aKeyIter = m_aKeyMap.end();
|
|
return false;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
// no more rows to fetch -> fail
|
|
m_aKeyIter = m_aKeyMap.end();
|
|
return false;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
m_aKeyIter = m_aKeyMap.begin();
|
|
for(;row > 0 && m_aKeyIter != m_aKeyMap.end();--row)
|
|
++m_aKeyIter;
|
|
}
|
|
}
|
|
if ( !fetchedRow )
|
|
{
|
|
if ( i_bFetchRow )
|
|
refreshRow();
|
|
else
|
|
invalidateRow();
|
|
}
|
|
|
|
return m_aKeyIter != m_aKeyMap.end() && m_aKeyIter != m_aKeyMap.begin();
|
|
}
|
|
|
|
sal_Bool SAL_CALL OKeySet::relative( sal_Int32 rows ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::relative" );
|
|
if(!rows)
|
|
{
|
|
refreshRow();
|
|
return sal_True;
|
|
}
|
|
return absolute(getRow()+rows);
|
|
}
|
|
|
|
sal_Bool OKeySet::previous_checked( sal_Bool i_bFetchRow )
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::previous" );
|
|
m_bInserted = m_bUpdated = m_bDeleted = sal_False;
|
|
if(m_aKeyIter != m_aKeyMap.begin())
|
|
{
|
|
--m_aKeyIter;
|
|
if ( i_bFetchRow )
|
|
refreshRow();
|
|
else
|
|
invalidateRow();
|
|
}
|
|
return m_aKeyIter != m_aKeyMap.begin();
|
|
}
|
|
sal_Bool SAL_CALL OKeySet::previous( ) throw(SQLException, RuntimeException)
|
|
{
|
|
return previous_checked(sal_True);
|
|
}
|
|
|
|
bool OKeySet::doTryRefetch_throw() throw(SQLException, RuntimeException)
|
|
{
|
|
// we just reassign the base members
|
|
Reference< XParameters > xParameter(m_xStatement,UNO_QUERY);
|
|
OSL_ENSURE(xParameter.is(),"No Parameter interface!");
|
|
xParameter->clearParameters();
|
|
|
|
sal_Int32 nPos=1;
|
|
connectivity::ORowVector< ORowSetValue >::Vector::const_iterator aParaIter;
|
|
connectivity::ORowVector< ORowSetValue >::Vector::const_iterator aParaEnd;
|
|
OUpdatedParameter::iterator aUpdateFind = m_aUpdatedParameter.find(m_aKeyIter->first);
|
|
if ( aUpdateFind == m_aUpdatedParameter.end() )
|
|
{
|
|
aParaIter = m_aParameterValueForCache.get().begin();
|
|
aParaEnd = m_aParameterValueForCache.get().end();
|
|
}
|
|
else
|
|
{
|
|
aParaIter = aUpdateFind->second.get().begin();
|
|
aParaEnd = aUpdateFind->second.get().end();
|
|
}
|
|
|
|
for(++aParaIter;aParaIter != aParaEnd;++aParaIter,++nPos)
|
|
{
|
|
::dbtools::setObjectWithInfo( xParameter, nPos, aParaIter->makeAny(), aParaIter->getTypeKind() );
|
|
}
|
|
|
|
// now set the primary key column values
|
|
connectivity::ORowVector< ORowSetValue >::Vector::const_iterator aIter = m_aKeyIter->second.first->get().begin();
|
|
SelectColumnsMetaData::const_iterator aPosIter = (*m_pKeyColumnNames).begin();
|
|
SelectColumnsMetaData::const_iterator aPosEnd = (*m_pKeyColumnNames).end();
|
|
for(;aPosIter != aPosEnd;++aPosIter,++aIter)
|
|
setOneKeyColumnParameter(nPos,xParameter,*aIter,aPosIter->second.nType,aPosIter->second.nScale);
|
|
aPosIter = (*m_pForeignColumnNames).begin();
|
|
aPosEnd = (*m_pForeignColumnNames).end();
|
|
for(;aPosIter != aPosEnd;++aPosIter,++aIter)
|
|
setOneKeyColumnParameter(nPos,xParameter,*aIter,aPosIter->second.nType,aPosIter->second.nScale);
|
|
|
|
m_xSet = m_xStatement->executeQuery();
|
|
OSL_ENSURE(m_xSet.is(),"No resultset from statement!");
|
|
return m_xSet->next();
|
|
}
|
|
|
|
// -----------------------------------------------------------------------------
|
|
void SAL_CALL OKeySet::refreshRow() throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::refreshRow" );
|
|
|
|
invalidateRow();
|
|
|
|
if(isBeforeFirst() || isAfterLast() || !m_xStatement.is())
|
|
return;
|
|
|
|
if ( m_aKeyIter->second.second.second.is() )
|
|
{
|
|
m_xRow = m_aKeyIter->second.second.second;
|
|
return;
|
|
}
|
|
|
|
sal_Bool bOK = doTryRefetch_throw();
|
|
if ( !bOK )
|
|
{
|
|
// This row has disappeared; remove it.
|
|
OKeySetMatrix::iterator aTemp = m_aKeyIter;
|
|
// use *next* row
|
|
++m_aKeyIter;
|
|
m_aKeyMap.erase(aTemp);
|
|
|
|
// adjust RowCount for the row we have removed
|
|
if (m_rRowCount > 0)
|
|
--m_rRowCount;
|
|
else
|
|
OSL_FAIL("m_rRowCount got out of sync: non-empty m_aKeyMap, but m_rRowCount <= 0");
|
|
|
|
if (m_aKeyIter == m_aKeyMap.end())
|
|
{
|
|
::comphelper::disposeComponent(m_xSet);
|
|
if (!isAfterLast())
|
|
{
|
|
// it was the last fetched row,
|
|
// but there may be another one to fetch
|
|
if (!fetchRow())
|
|
{
|
|
// nope, that really was the last
|
|
m_aKeyIter = m_aKeyMap.end();
|
|
OSL_ENSURE(isAfterLast(), "fetchRow() failed but not isAfterLast()!");
|
|
}
|
|
}
|
|
// Now, either fetchRow has set m_xRow or isAfterLast()
|
|
}
|
|
else
|
|
{
|
|
refreshRow();
|
|
}
|
|
}
|
|
else
|
|
{
|
|
m_xRow.set(m_xSet,UNO_QUERY);
|
|
OSL_ENSURE(m_xRow.is(),"No row from statement!");
|
|
}
|
|
}
|
|
|
|
sal_Bool OKeySet::fetchRow()
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::fetchRow" );
|
|
// fetch the next row and append on the keyset
|
|
sal_Bool bRet = sal_False;
|
|
if ( !m_bRowCountFinal && (!m_nMaxRows || sal_Int32(m_aKeyMap.size()) < m_nMaxRows) )
|
|
bRet = m_xDriverSet->next();
|
|
if ( bRet )
|
|
{
|
|
ORowSetRow aKeyRow = new connectivity::ORowVector< ORowSetValue >((*m_pKeyColumnNames).size() + m_pForeignColumnNames->size());
|
|
ORowSetRow aFullRow = new connectivity::ORowVector< ORowSetValue >(m_pColumnNames->size());
|
|
|
|
// Fetch the columns only once and in order, to satisfy restrictive backends such as ODBC
|
|
const int cc = m_xSetMetaData->getColumnCount();
|
|
connectivity::ORowVector< ORowSetValue >::Vector::iterator aFRIter = aFullRow->get().begin();
|
|
// Column 0 is reserved for the bookmark; unused here.
|
|
++aFRIter;
|
|
BOOST_STATIC_ASSERT_MSG(sizeof(int) >= sizeof(sal_Int32), "At least a 32 bit word expecteed");
|
|
for (int i = 1; i <= cc; ++i, ++aFRIter )
|
|
{
|
|
aFRIter->fill(i, m_xSetMetaData->getColumnType(i), m_xDriverRow);
|
|
}
|
|
|
|
::comphelper::disposeComponent(m_xSet);
|
|
m_xRow.set(new OPrivateRow(aFullRow->get()));
|
|
|
|
connectivity::ORowVector< ORowSetValue >::Vector::iterator aIter = aKeyRow->get().begin();
|
|
// copy key columns
|
|
SelectColumnsMetaData::const_iterator aPosIter = (*m_pKeyColumnNames).begin();
|
|
SelectColumnsMetaData::const_iterator aPosEnd = (*m_pKeyColumnNames).end();
|
|
for(;aPosIter != aPosEnd;++aPosIter,++aIter)
|
|
{
|
|
const SelectColumnDescription& rColDesc = aPosIter->second;
|
|
aIter->fill(rColDesc.nPosition, rColDesc.nType, m_xRow);
|
|
}
|
|
// copy missing columns from other tables
|
|
aPosIter = (*m_pForeignColumnNames).begin();
|
|
aPosEnd = (*m_pForeignColumnNames).end();
|
|
for(;aPosIter != aPosEnd;++aPosIter,++aIter)
|
|
{
|
|
const SelectColumnDescription& rColDesc = aPosIter->second;
|
|
aIter->fill(rColDesc.nPosition, rColDesc.nType, m_xRow);
|
|
}
|
|
m_aKeyIter = m_aKeyMap.insert(OKeySetMatrix::value_type(m_aKeyMap.rbegin()->first+1,OKeySetValue(aKeyRow,::std::pair<sal_Int32,Reference<XRow> >(0,NULL)))).first;
|
|
}
|
|
else
|
|
m_bRowCountFinal = sal_True;
|
|
return bRet;
|
|
}
|
|
|
|
bool OKeySet::fillAllRows()
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::fillAllRows" );
|
|
if(m_bRowCountFinal)
|
|
{
|
|
return false;
|
|
}
|
|
else
|
|
{
|
|
while(fetchRow())
|
|
;
|
|
return true;
|
|
}
|
|
}
|
|
// XRow
|
|
sal_Bool SAL_CALL OKeySet::wasNull( ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::wasNull" );
|
|
OSL_ENSURE(m_xRow.is(),"m_xRow is null!");
|
|
return m_xRow->wasNull();
|
|
}
|
|
|
|
::rtl::OUString SAL_CALL OKeySet::getString( sal_Int32 columnIndex ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::getString" );
|
|
OSL_ENSURE(m_xRow.is(),"m_xRow is null!");
|
|
return m_xRow->getString(columnIndex);
|
|
}
|
|
|
|
sal_Bool SAL_CALL OKeySet::getBoolean( sal_Int32 columnIndex ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::getBoolean" );
|
|
OSL_ENSURE(m_xRow.is(),"m_xRow is null!");
|
|
return m_xRow->getBoolean(columnIndex);
|
|
}
|
|
|
|
sal_Int8 SAL_CALL OKeySet::getByte( sal_Int32 columnIndex ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::getByte" );
|
|
OSL_ENSURE(m_xRow.is(),"m_xRow is null!");
|
|
return m_xRow->getByte(columnIndex);
|
|
}
|
|
|
|
sal_Int16 SAL_CALL OKeySet::getShort( sal_Int32 columnIndex ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::getShort" );
|
|
OSL_ENSURE(m_xRow.is(),"m_xRow is null!");
|
|
return m_xRow->getShort(columnIndex);
|
|
}
|
|
|
|
sal_Int32 SAL_CALL OKeySet::getInt( sal_Int32 columnIndex ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::getInt" );
|
|
OSL_ENSURE(m_xRow.is(),"m_xRow is null!");
|
|
return m_xRow->getInt(columnIndex);
|
|
}
|
|
|
|
sal_Int64 SAL_CALL OKeySet::getLong( sal_Int32 columnIndex ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::getLong" );
|
|
OSL_ENSURE(m_xRow.is(),"m_xRow is null!");
|
|
return m_xRow->getLong(columnIndex);
|
|
}
|
|
|
|
float SAL_CALL OKeySet::getFloat( sal_Int32 columnIndex ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::getFloat" );
|
|
OSL_ENSURE(m_xRow.is(),"m_xRow is null!");
|
|
return m_xRow->getFloat(columnIndex);
|
|
}
|
|
|
|
double SAL_CALL OKeySet::getDouble( sal_Int32 columnIndex ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::getDouble" );
|
|
OSL_ENSURE(m_xRow.is(),"m_xRow is null!");
|
|
return m_xRow->getDouble(columnIndex);
|
|
}
|
|
|
|
Sequence< sal_Int8 > SAL_CALL OKeySet::getBytes( sal_Int32 columnIndex ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::getBytes" );
|
|
OSL_ENSURE(m_xRow.is(),"m_xRow is null!");
|
|
return m_xRow->getBytes(columnIndex);
|
|
}
|
|
|
|
::com::sun::star::util::Date SAL_CALL OKeySet::getDate( sal_Int32 columnIndex ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::getDate" );
|
|
OSL_ENSURE(m_xRow.is(),"m_xRow is null!");
|
|
return m_xRow->getDate(columnIndex);
|
|
}
|
|
|
|
::com::sun::star::util::Time SAL_CALL OKeySet::getTime( sal_Int32 columnIndex ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::getTime" );
|
|
OSL_ENSURE(m_xRow.is(),"m_xRow is null!");
|
|
return m_xRow->getTime(columnIndex);
|
|
}
|
|
|
|
::com::sun::star::util::DateTime SAL_CALL OKeySet::getTimestamp( sal_Int32 columnIndex ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::getTimestamp" );
|
|
OSL_ENSURE(m_xRow.is(),"m_xRow is null!");
|
|
return m_xRow->getTimestamp(columnIndex);
|
|
}
|
|
|
|
Reference< ::com::sun::star::io::XInputStream > SAL_CALL OKeySet::getBinaryStream( sal_Int32 columnIndex ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::getBinaryStream" );
|
|
OSL_ENSURE(m_xRow.is(),"m_xRow is null!");
|
|
return m_xRow->getBinaryStream(columnIndex);
|
|
}
|
|
|
|
Reference< ::com::sun::star::io::XInputStream > SAL_CALL OKeySet::getCharacterStream( sal_Int32 columnIndex ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::getCharacterStream" );
|
|
OSL_ENSURE(m_xRow.is(),"m_xRow is null!");
|
|
return m_xRow->getCharacterStream(columnIndex);
|
|
}
|
|
|
|
Any SAL_CALL OKeySet::getObject( sal_Int32 columnIndex, const Reference< ::com::sun::star::container::XNameAccess >& typeMap ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::getObject" );
|
|
OSL_ENSURE(m_xRow.is(),"m_xRow is null!");
|
|
return m_xRow->getObject(columnIndex,typeMap);
|
|
}
|
|
|
|
Reference< XRef > SAL_CALL OKeySet::getRef( sal_Int32 columnIndex ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::getRef" );
|
|
OSL_ENSURE(m_xRow.is(),"m_xRow is null!");
|
|
return m_xRow->getRef(columnIndex);
|
|
}
|
|
|
|
Reference< XBlob > SAL_CALL OKeySet::getBlob( sal_Int32 columnIndex ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::getBlob" );
|
|
OSL_ENSURE(m_xRow.is(),"m_xRow is null!");
|
|
return m_xRow->getBlob(columnIndex);
|
|
}
|
|
|
|
Reference< XClob > SAL_CALL OKeySet::getClob( sal_Int32 columnIndex ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::getClob" );
|
|
OSL_ENSURE(m_xRow.is(),"m_xRow is null!");
|
|
return m_xRow->getClob(columnIndex);
|
|
}
|
|
|
|
Reference< XArray > SAL_CALL OKeySet::getArray( sal_Int32 columnIndex ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::getArray" );
|
|
OSL_ENSURE(m_xRow.is(),"m_xRow is null!");
|
|
return m_xRow->getArray(columnIndex);
|
|
}
|
|
|
|
sal_Bool SAL_CALL OKeySet::rowUpdated( ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::rowUpdated" );
|
|
return m_aKeyIter != m_aKeyMap.begin() && m_aKeyIter != m_aKeyMap.end() && m_aKeyIter->second.second.first == 2;
|
|
}
|
|
|
|
sal_Bool SAL_CALL OKeySet::rowInserted( ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::rowInserted" );
|
|
return m_aKeyIter != m_aKeyMap.begin() && m_aKeyIter != m_aKeyMap.end() && m_aKeyIter->second.second.first == 1;
|
|
}
|
|
|
|
sal_Bool SAL_CALL OKeySet::rowDeleted( ) throw(SQLException, RuntimeException)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::rowDeleted" );
|
|
sal_Bool bDeleted = m_bDeleted;
|
|
m_bDeleted = sal_False;
|
|
return bDeleted;
|
|
}
|
|
|
|
::rtl::OUString OKeySet::getComposedTableName(const ::rtl::OUString& _sCatalog,
|
|
const ::rtl::OUString& _sSchema,
|
|
const ::rtl::OUString& _sTable)
|
|
{
|
|
RTL_LOGFILE_CONTEXT_AUTHOR( aLogger, "dbaccess", "Ocke.Janssen@sun.com", "OKeySet::getComposedTableName" );
|
|
::rtl::OUString aComposedName;
|
|
Reference<XDatabaseMetaData> xMetaData = m_xConnection->getMetaData();
|
|
|
|
if( xMetaData.is() && xMetaData->supportsTableCorrelationNames() )
|
|
{
|
|
aComposedName = ::dbtools::composeTableName( xMetaData, _sCatalog, _sSchema, _sTable, sal_False, ::dbtools::eInDataManipulation );
|
|
// first we have to check if the composed tablename is in the select clause or if an alias is used
|
|
Reference<XTablesSupplier> xTabSup(m_xComposer,UNO_QUERY);
|
|
Reference<XNameAccess> xSelectTables = xTabSup->getTables();
|
|
OSL_ENSURE(xSelectTables.is(),"No Select tables!");
|
|
if(xSelectTables.is())
|
|
{
|
|
if(!xSelectTables->hasByName(aComposedName))
|
|
{ // the composed name isn't used in the select clause so we have to find out which name is used instead
|
|
::rtl::OUString sCatalog,sSchema,sTable;
|
|
::dbtools::qualifiedNameComponents(xMetaData,m_sUpdateTableName,sCatalog,sSchema,sTable,::dbtools::eInDataManipulation);
|
|
aComposedName = ::dbtools::composeTableNameForSelect( m_xConnection, sCatalog, sSchema, sTable );
|
|
}
|
|
else
|
|
aComposedName = ::dbtools::composeTableNameForSelect( m_xConnection, _sCatalog, _sSchema, _sTable );
|
|
}
|
|
}
|
|
else
|
|
aComposedName = ::dbtools::composeTableNameForSelect( m_xConnection, _sCatalog, _sSchema, _sTable );
|
|
|
|
return aComposedName;
|
|
}
|
|
|
|
namespace dbaccess
|
|
{
|
|
|
|
void getColumnPositions(const Reference<XNameAccess>& _rxQueryColumns,
|
|
const ::com::sun::star::uno::Sequence< ::rtl::OUString >& _aColumnNames,
|
|
const ::rtl::OUString& _rsUpdateTableName,
|
|
SelectColumnsMetaData& o_rColumnNames,
|
|
bool i_bAppendTableName)
|
|
{
|
|
// get the real name of the columns
|
|
Sequence< ::rtl::OUString> aSelNames(_rxQueryColumns->getElementNames());
|
|
const ::rtl::OUString* pSelIter = aSelNames.getConstArray();
|
|
const ::rtl::OUString* pSelEnd = pSelIter + aSelNames.getLength();
|
|
|
|
const ::rtl::OUString* pTblColumnIter = _aColumnNames.getConstArray();
|
|
const ::rtl::OUString* pTblColumnEnd = pTblColumnIter + _aColumnNames.getLength();
|
|
|
|
|
|
::comphelper::UStringMixLess aTmp(o_rColumnNames.key_comp());
|
|
::comphelper::UStringMixEqual bCase(static_cast< ::comphelper::UStringMixLess*>(&aTmp)->isCaseSensitive());
|
|
|
|
for(sal_Int32 nPos = 1;pSelIter != pSelEnd;++pSelIter,++nPos)
|
|
{
|
|
Reference<XPropertySet> xQueryColumnProp(_rxQueryColumns->getByName(*pSelIter),UNO_QUERY_THROW);
|
|
::rtl::OUString sRealName,sTableName;
|
|
OSL_ENSURE(xQueryColumnProp->getPropertySetInfo()->hasPropertyByName(PROPERTY_REALNAME),"Property REALNAME not available!");
|
|
OSL_ENSURE(xQueryColumnProp->getPropertySetInfo()->hasPropertyByName(PROPERTY_TABLENAME),"Property TABLENAME not available!");
|
|
xQueryColumnProp->getPropertyValue(PROPERTY_REALNAME) >>= sRealName;
|
|
xQueryColumnProp->getPropertyValue(PROPERTY_TABLENAME) >>= sTableName;
|
|
|
|
for(;pTblColumnIter != pTblColumnEnd;++pTblColumnIter)
|
|
{
|
|
if(bCase(sRealName,*pTblColumnIter) && bCase(_rsUpdateTableName,sTableName) && o_rColumnNames.find(*pTblColumnIter) == o_rColumnNames.end())
|
|
{
|
|
sal_Int32 nType = 0;
|
|
xQueryColumnProp->getPropertyValue(PROPERTY_TYPE) >>= nType;
|
|
sal_Int32 nScale = 0;
|
|
xQueryColumnProp->getPropertyValue(PROPERTY_SCALE) >>= nScale;
|
|
::rtl::OUString sColumnDefault;
|
|
if ( xQueryColumnProp->getPropertySetInfo()->hasPropertyByName(PROPERTY_DEFAULTVALUE) )
|
|
xQueryColumnProp->getPropertyValue(PROPERTY_DEFAULTVALUE) >>= sColumnDefault;
|
|
|
|
sal_Int32 nNullable = ColumnValue::NULLABLE_UNKNOWN;
|
|
OSL_VERIFY( xQueryColumnProp->getPropertyValue( PROPERTY_ISNULLABLE ) >>= nNullable );
|
|
|
|
if ( i_bAppendTableName )
|
|
{
|
|
::rtl::OUStringBuffer sName;
|
|
sName.append(sTableName);
|
|
sName.appendAscii(".");
|
|
sName.append(sRealName);
|
|
SelectColumnDescription aColDesc( nPos, nType,nScale,nNullable != sdbc::ColumnValue::NO_NULLS, sColumnDefault );
|
|
aColDesc.sRealName = sRealName;
|
|
aColDesc.sTableName = sTableName;
|
|
o_rColumnNames[sName.makeStringAndClear()] = aColDesc;
|
|
}
|
|
else
|
|
o_rColumnNames[sRealName] = SelectColumnDescription( nPos, nType,nScale,nNullable != sdbc::ColumnValue::NO_NULLS, sColumnDefault );
|
|
|
|
break;
|
|
}
|
|
}
|
|
pTblColumnIter = _aColumnNames.getConstArray();
|
|
}
|
|
}
|
|
}
|
|
|
|
void OKeySet::impl_convertValue_throw(const ORowSetRow& _rInsertRow,const SelectColumnDescription& i_aMetaData)
|
|
{
|
|
ORowSetValue& aValue((_rInsertRow->get())[i_aMetaData.nPosition]);
|
|
switch(i_aMetaData.nType)
|
|
{
|
|
case DataType::DECIMAL:
|
|
case DataType::NUMERIC:
|
|
{
|
|
::rtl::OUString sValue = aValue.getString();
|
|
sal_Int32 nIndex = sValue.indexOf('.');
|
|
if ( nIndex != -1 )
|
|
{
|
|
aValue = sValue.copy(0,::std::min(sValue.getLength(),nIndex + (i_aMetaData.nScale > 0 ? i_aMetaData.nScale + 1 : 0)));
|
|
}
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
|