mir/lm-sensors
2
0
Fork 0
mirror of https://github.com/lm-sensors/lm-sensors synced 2025-08-30 13:57:41 +00:00
Code Issues Releases Wiki Activity

Updated EEPROM documentation

Browse Source 
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@402 7894878c-1315-0410-8ee3-d5d059ff63e0
This commit is contained in:
Frodo Looijaard
1999-04-20 15:36:08 +00:00
parent 084ee510ab
commit 1e7553b475
1 changed files with 36 additions and 10 deletions
Download Patch File Download Diff File Expand all files Collapse all files

46
doc/chips/eeprom
View File

@@ -1,7 +1,40 @@
Some quick notes about the eeprom.o module and decode_dimms.pl. Kernel driver `eeprom.o'
========================
EEPROM Module Status: Complete and well-tested
-------------
Supported chips:
* Any EEPROM chip in the designated address range
Prefix `eeprom'
Addresses scanned: I2C 0x50 - 0x57 (inclusive)
Datasheet: Publicly available from Intel
Author: Frodo Looijaard <frodol@dds.nl> and Philip Edelbrock
<phil@netroedge.com>
Module Parameters
-----------------
* checksum: int
Only accept eeproms whose checksum is correct
* force: short array (min = 1, max = 48)
List of adapter,address pairs to boldly assume to be present
* force_eeprom: short array (min = 1, max = 48)
List of adapter,address pairs which are unquestionably assumed to contain
a `eeprom' chip
* ignore: short array (min = 1, max = 48)
List of adapter,address pairs not to scan
* ignore_range: short array (min = 1, max = 48)
List of adapter,start-addr,end-addr triples not to scan
* probe: short array (min = 1, max = 48)
List of adapter,address pairs to scan additionally
* probe_range: short array (min = 1, max = 48)
List of adapter,start-addr,end-addr triples to scan additionally
Description
-----------
This is a simple EEPROM module meant to enable reading the first 128 bytes This is a simple EEPROM module meant to enable reading the first 128 bytes
of an EEPROM (on a SDRAM DIMM). This module will probably need to be at of an EEPROM (on a SDRAM DIMM). This module will probably need to be at
@@ -74,10 +107,3 @@ you will get a strange "decode_dimms.pl: no such file or directory" error.
Also note that the script assumes that _all_ the eeproms belong to DIMMs, Also note that the script assumes that _all_ the eeproms belong to DIMMs,
which may not be the case. which may not be the case.
------------------------------------------------------------------------
** PDF is available from Intel or our web site (spdsd12a.pdf):
http://www.netroedge.com/~lm78
"eeprom" doc created Dec. 14, 1998 by Philip Edelbrock