diff --git a/BUGS b/BUGS index 475776e7..52b17664 100644 --- a/BUGS +++ b/BUGS @@ -1,6 +1,6 @@ Except for many unimplemented things (listed in the TODO file), there may be true bugs too. If you experience any problems not listed here, -do not hesitate to mail sensors@stimpy.netroedge.com. +do not hesitate to mail us (see http://secure.netroedge.com/~lm78/author.html). But read this file and doc/FAQ first, please! ============================================================================ diff --git a/CONTRIBUTORS b/CONTRIBUTORS index d3a95864..4332bd86 100644 --- a/CONTRIBUTORS +++ b/CONTRIBUTORS @@ -1,7 +1,7 @@ This package could not have been created without the help of many, many people. The most notable contributors are listed below. You are probably best off -to mail if you have questions, suggestions or -problems. +to use the mailing list (see http://secure.netroedge.com/~lm78/author.html) +if you have questions, suggestions or problems. * Alexander Larsson Wrote the original lm78 module; lm_sensors version 1 was no more than an diff --git a/README b/README index 4da16e00..1d65e208 100644 --- a/README +++ b/README @@ -163,11 +163,11 @@ are too many mainboards to keep a list of busses and chips used on them. On the other hand, we provide a program called 'sensors-detect' which tries to figure out what hardware is available on your system. -The developers of this package can be reached through the mailing-list -. Do not hesitate to mail us if you have -questions, suggestions, problems, want to contribute, or just want to -report it works for you. But please try to read the documentation and -FAQ before you ask any questions! +The developers of this package can be reached through a mailing-list +(see http://secure.netroedge.com/~lm78/author.html). Do not hesitate +to mail us if you have questions, suggestions, problems, want to +contribute, or just want to report it works for you. But please try to +read the documentation and FAQ before you ask any questions! The latest version of this package can always be found on our homepage: http://secure.netroedge.com/~lm78/. Pre-release versions can be retrieved diff --git a/README.package b/README.package index 39497d5a..fe833080 100644 --- a/README.package +++ b/README.package @@ -29,4 +29,4 @@ and INSTALLs in i2c and lm_sensors2. Enjoy! --- The Lm_sensors Development Team +-- The Lm_sensors Development Team diff --git a/README.patches b/README.patches index 89cb73f6..70c2888e 100644 --- a/README.patches +++ b/README.patches @@ -27,4 +27,4 @@ The patches must be applied in this order: i2c then lm_sensors Enjoy! --- The Lm_sensors Development Team +-- The Lm_sensors Development Team diff --git a/RPM/lm_sensors.spec b/RPM/lm_sensors.spec index 490eec5a..9a533d35 100644 --- a/RPM/lm_sensors.spec +++ b/RPM/lm_sensors.spec @@ -47,8 +47,7 @@ Docdir: %{prefix}/doc Requires: %{name}-drivers >= %{ver} Url: http://www.netroedge.com/~lm78/ -##For officially distributed packages, please sign below -##Packager: Lm_sensors Group +#Packager: Your Name %package drivers Summary: Chip and bus drivers for general SMBus access and hardware monitoring. diff --git a/doc/busses/i2c-sis5595 b/doc/busses/i2c-sis5595 index 7a8d0713..9997d32d 100644 --- a/doc/busses/i2c-sis5595 +++ b/doc/busses/i2c-sis5595 @@ -54,6 +54,3 @@ A BUS driver is used by other CHIP drivers to access chips on the bus. To install this driver, simply do # modprobe i2c-sis5595 - -This driver is ALPHA!!! -Please send feedback to us at sensors@stimpy.netroedge.com. diff --git a/doc/busses/i2c-sis630 b/doc/busses/i2c-sis630 index 713d2db8..ffaaab02 100644 --- a/doc/busses/i2c-sis630 +++ b/doc/busses/i2c-sis630 @@ -47,9 +47,9 @@ Note: kernel versions later than 2.4.18 not tested. If anyone owns a board with those chips AND is willing to risk crashing & burning an otherwise well-behaved kernel in the name of progress... please -contact me at or via the project's mailing list: -. Please send bug reports and/or success -stories as well. +contact me at or via the project's mailing list: see +http://secure.netroedge.com/~lm78/author.html. Please send bug reports +and/or success stories as well. Thank Yous diff --git a/doc/busses/i2c-sis645 b/doc/busses/i2c-sis645 index 61b765cd..58f754bb 100644 --- a/doc/busses/i2c-sis645 +++ b/doc/busses/i2c-sis645 @@ -56,8 +56,8 @@ as well: 635, and 635T. If anyone owns a board with those chips AND is willing to risk crashing & burning an otherwise well-behaved kernel in the name of progress... please contact me at or via the project's mailing list: -. Please send bug reports and/or success -stories as well. +see http://secure.netroedge.com/~lm78/author.html. Please send bug reports +and/or success stories as well. TO DOs diff --git a/doc/chips/SUMMARY b/doc/chips/SUMMARY index f5561cf1..7043afbd 100644 --- a/doc/chips/SUMMARY +++ b/doc/chips/SUMMARY @@ -13,7 +13,7 @@ run prog/detect/sensors-detect. If your sensor chip is not detected by sensors-detect or supported by this package, -please send mail to sensors@stimpy.netroedge.com. +please send mail (see http://secure.netroedge.com/~lm78/author.html) Please include the following in your mail: - The output of (as root) 'prog/detect/sensors-detect' diff --git a/doc/chips/icspll b/doc/chips/icspll index 6557bef1..5ebab8bb 100644 --- a/doc/chips/icspll +++ b/doc/chips/icspll @@ -87,8 +87,7 @@ RESULTS If you try this on a supported configuration, please report your clock chip, your SMBus chip (piix4 or ali15x3), and the results of -'cat /proc/sys/dev/sensors/icspll-i2c-*-69/reg0-6' to -sensors@stimpy.netroedge.com. +'cat /proc/sys/dev/sensors/icspll-i2c-*-69/reg0-6' TO DO diff --git a/doc/chips/mtp008 b/doc/chips/mtp008 index 72178355..bf20c2c0 100644 --- a/doc/chips/mtp008 +++ b/doc/chips/mtp008 @@ -71,8 +71,3 @@ Sensor selection is as follows: 1 Analog input (not for temperature sensing) 2,3 2 Thermistor 1,2,3 3 Pentium diode 1,2 - - -Maintainer ------------------ -Send requests to the sensors@stimpy.netroedge.com mailing list. diff --git a/doc/chips/w83627hf b/doc/chips/w83627hf index 5e1555d4..32205029 100644 --- a/doc/chips/w83627hf +++ b/doc/chips/w83627hf @@ -92,4 +92,3 @@ Author/Maintainer ----------------- Mark D. Studebaker (mdsxyz123@yahoo.com). Derived from the w83781d driver. -Send requests to the sensors@stimpy.netroedge.com mailing list. diff --git a/doc/chips/w83781d b/doc/chips/w83781d index 9eee6e7e..5987ab0b 100644 --- a/doc/chips/w83781d +++ b/doc/chips/w83781d @@ -599,9 +599,8 @@ register in Bank0.CR51 of W83781D. Author/Maintainer ----------------- -Original 781D support: Frodo and Phil (sensors@stimpy.netroedge.com) +Original 781D support: Frodo and Phil 782D/783S support added by: Mark D. Studebaker (mdsxyz123@yahoo.com) -Send requests to the sensors@stimpy.netroedge.com mailing list. Asus Clones diff --git a/doc/chips/xeontemp b/doc/chips/xeontemp index 9fd0c716..a77a214a 100644 --- a/doc/chips/xeontemp +++ b/doc/chips/xeontemp @@ -106,4 +106,3 @@ Author/Maintainer Mark D. Studebaker (mdsxyz123@yahoo.com). Derived from the adm1021 driver. Thanks to Philip Pokorny for help with this document. -Send requests to the sensors@stimpy.netroedge.com mailing list. diff --git a/doc/developers/new_drivers b/doc/developers/new_drivers index a7a5606a..9328a12d 100644 --- a/doc/developers/new_drivers +++ b/doc/developers/new_drivers @@ -136,10 +136,11 @@ steps apply. * If you want to have your driver integrated to Linux 2.6, you have to port your driver to the new sysfs interface. Once done and preferably - after testing, submit a patch to the Linux kernel mailing list - , our mailing list - ,and Greg KH (greg at kroah - dot com). + after testing, submit a patch to our mailing list: see + http://secure.netroedge.com/~lm78/author.html + Make sure to check the current status for your driver first: + http://secure.netroedge.com/~lm78/kernel26.html + http://secure.netroedge.com/~lm78/newdrivers.html --------------------------------------------------------------------- Checklist for us to do on the webpage: diff --git a/doc/donations b/doc/donations index ef2e4e7e..21af2575 100644 --- a/doc/donations +++ b/doc/donations @@ -11,8 +11,8 @@ Donation of usable computer hardware also supports the project in general, so hardware which isn't directly related to the development of a hardware monitoring driver, but can be used to build test systems, is welcome too. -If you would like to make a donation, please contact us at -sensors@stimpy.netroedge.com. Thanks! +If you would like to make a donation, please contact us. See +http://secure.netroedge.com/~lm78/author.html. Thanks! Donations are listed in chronological order. Note that the person mentioned diff --git a/doc/useful_addresses.html b/doc/useful_addresses.html index e43a1cc8..eef5cfc8 100644 --- a/doc/useful_addresses.html +++ b/doc/useful_addresses.html @@ -285,10 +285,6 @@ implementations. Please report any other references you have found!

(ASF) specification
A standard for system management messages using the SMBus and passing this information to remote management devices. By the DMTF. -
  • LM Sensors mailing list - archive -
    This is the mailing list archive for sensors@stimpy.netroedge.com, - the developer's mailing list. The archive contains messages since October 28, 2001.
  • Recursive make considered harmful
    A paper on which the version 2 Makefile is based.
    • diff --git a/prog/pwm/pwmconfig b/prog/pwm/pwmconfig index dbc16956..5cf3f046 100755 --- a/prog/pwm/pwmconfig +++ b/prog/pwm/pwmconfig @@ -9,7 +9,7 @@ # Verify that all fans are running at normal speed after this # program has exited!!! # -# Copyright 2003 The lm_sensors project +# Copyright 2003-2005 The lm_sensors project # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by diff --git a/prog/rrd/README b/prog/rrd/README index 460fbadc..b9cb0433 100644 --- a/prog/rrd/README +++ b/prog/rrd/README @@ -79,15 +79,10 @@ INSTALLATION INSTRUCTIONS to test -What to do for help -------------------- +TROUBLESHOOTING +--------------- RRD problems: See the RRD documentation - lm_sensors problems: See the lm_sensors FAQ and other documentation, - enter a support ticket on our - web page http://www.lm-sensors.nu or email us at - sensors@stimpy.netroedge.com - Cron problems: check the cron logs, maybe your cron format is different or you need to signal the cron daemon? @@ -103,11 +98,6 @@ What to do for help including the line Options ExecCGI - Problems with these scripts: - Enter a support ticket on our - web page http://www.lm-sensors.nu or email us at - sensors@stimpy.netroedge.com - Removing the "RRDTOOL / TOBI OETIKER" tag in RRD graphs: Comment out the line gator(gif, (int) im->xgif-5, 5); diff --git a/prog/tellerstats/README b/prog/tellerstats/README index d589bb09..873073ef 100644 --- a/prog/tellerstats/README +++ b/prog/tellerstats/README @@ -6,8 +6,6 @@ with Changes by Mark D. Studebaker and Hans Ecke -Send requests to the lm_sensors mailing list sensors@stimpy.netroedge.com. - Required Utilities and Packages: