mir/lm-sensors
2
0
Fork 0
mirror of https://github.com/lm-sensors/lm-sensors synced 2025-08-31 22:35:23 +00:00
Code Issues Releases Wiki Activity

vt1211 minor update

Browse Source 
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1454 7894878c-1315-0410-8ee3-d5d059ff63e0
This commit is contained in:
Mark D. Studebaker
2002-07-15 01:28:22 +00:00
parent 9e97391c1c
commit b1cde9b2ec
3 changed files with 66 additions and 29 deletions
Download Patch File Download Diff File Expand all files Collapse all files

87
etc/sensors.conf.eg
View File

@@ -1341,63 +1341,94 @@ chip "adm1021-*" "adm1023-*" "max1617-*" "max1617a-*" "thmc10-*" "lm84-*" "gl523
# set remote_temp_over 70 # set remote_temp_over 70
chip "vt1211-*" chip "vt1211-*"
#
label in0 "unused" # temp1 and in6 are not implemented in vt1211
label in1 "+2.5V" # temp4-7 (thermistor) cacluations unimplemented here - requires logarithms :(
#
# 1 for temp, 0 for volt.
# Sensor Voltage Mode Temp Mode config bit
# -------- ------------ --------- --------------
# Reading 1 temp3
# UCH1/Reading2 in0 temp2 0x04 (4)
# UCH2 in1 temp4 0x08 (8)
# UCH3 in2 temp5 0x10 (16)
# UCH4 in3 temp6 0x20 (32)
# UCH5 in4 temp7 0x40 (64)
# 3.3V in5
#
# set uch1-2 to temp mode, uch3-5 to voltage mode
#
ignore temp1
ignore in6
set config 12
ignore in0
ignore in1
ignore temp5
ignore temp6
ignore temp7
#
# label in0 "unused"
# label in1 "unused"
label in2 "VCore1" label in2 "VCore1"
label in3 "+5V" label in3 "+5V"
label in4 "+12V" label in4 "+12V"
label in5 "+3.3V" label in5 "+3.3V"
label in6 "VCore2" # label in6 "VCore2"
label temp1 "1211 Temp" # label temp1 "1211 Temp"
label temp2 "MB Temp" label temp2 "MB1 Temp"
label temp3 "Proc Temp" label temp3 "Proc Temp"
label temp4 "MB2 Temp"
# #
# All voltage calculations have the form # All voltage calculations have the form
# ((@ * 100) - 3) / (K * 95.8), (@ * K * 0.958) + .03 # ((@ * 100) - 3) / (K * 95.8), (@ * K * 0.958) + .03
# where K = R2 / (R1 + R2). # where K = R2 / (R1 + R2).
# Use the following K values based on input voltage: # Use the following K values based on input voltage.
# voltage K # This of course assumes the mobo has the resistors
# 2.5 0.8333 # recommended by Via in the datasheet.
# 3.3 0.6296 # Voltage K
# 3.5 (Vcore) 0.5952 # VCore 1.0
# 5.0 0.4167 # 2.5 0.8333
# 12.0 0.1754 # 3.3 (in5 internal) 0.6296
# 3.5 (3.3V ext.) 0.5952
# 5.0 0.4167
# 12.0 0.1754
# #
compute in0 ((@ * 100) - 3) / (0.5952 * 95.8), (@ * 0.5952 * 0.958) + .03 # compute in0 ((@ * 100) - 3) / (0.5952 * 95.8), (@ * 0.5952 * 0.958) + .03
compute in1 ((@ * 100) - 3) / (0.8333 * 95.8), (@ * 0.8333 * 0.958) + .03 # compute in1 ((@ * 100) - 3) / (0.8333 * 95.8), (@ * 0.8333 * 0.958) + .03
compute in2 ((@ * 100) - 3) / (0.5952 * 95.8), (@ * 0.5952 * 0.958) + .03 compute in2 ((@ * 100) - 3) / (0.5952 * 95.8), (@ * 0.5952 * 0.958) + .03
compute in3 ((@ * 100) - 3) / (0.4167 * 95.8), (@ * 0.4167 * 0.958) + .03 compute in3 ((@ * 100) - 3) / (0.4167 * 95.8), (@ * 0.4167 * 0.958) + .03
compute in4 ((@ * 100) - 3) / (0.1754 * 95.8), (@ * 0.1754 * 0.958) + .03 compute in4 ((@ * 100) - 3) / (0.1754 * 95.8), (@ * 0.1754 * 0.958) + .03
compute in5 ((@ * 100) - 3) / (0.6296 * 95.8), (@ * 0.6296 * 0.958) + .03 compute in5 ((@ * 100) - 3) / (0.6296 * 95.8), (@ * 0.6296 * 0.958) + .03
compute in6 ((@ * 100) - 3) / (0.5952 * 95.8), (@ * 0.5952 * 0.958) + .03 # compute in6 ((@ * 100) - 3) / (0.5952 * 95.8), (@ * 0.5952 * 0.958) + .03
set in1_min 2.5 * 0.95 set vrm 9.1
set in1_max 2.5 * 1.05 # set in0_min 2.5 * 0.95
set in1_min 2.5 * 0.95 # set in0_max 2.5 * 1.05
set in1_max 2.5 * 1.05 # set in1_min 2.5 * 0.95
set in2_min 2.0 * 0.97 # set in1_max 2.5 * 1.05
set in2_max 2.0 * 1.03 set in2_min vid * 0.97
set in2_max vid * 1.03
set in3_min 5.0 * 0.95 set in3_min 5.0 * 0.95
set in3_max 5.0 * 1.05 set in3_max 5.0 * 1.05
set in4_min 12.0 * 0.90 set in4_min 12.0 * 0.90
set in4_max 12.0 * 1.10 set in4_max 12.0 * 1.10
set in5_min 3.3 * 0.95 set in5_min 3.3 * 0.95
set in5_max 3.3 * 1.05 set in5_max 3.3 * 1.05
set in6_min 2.0 * 0.97 # set in6_min 2.0 * 0.97
set in6_max 2.0 * 1.03 # set in6_max 2.0 * 1.03
compute temp1 (@ - 65) / 0.9686, (@ * 0.9686) + 65 # compute temp1 (@ - 65) / 0.9686, (@ * 0.9686) + 65
compute temp3 (@ - 65) / 0.9686, (@ * 0.9686) + 65 compute temp3 (@ - 65) / 0.9686, (@ * 0.9686) + 65
set temp1_hyst 40 # set temp1_hyst 40
set temp1_over 45 # set temp1_over 45
set temp2_hyst 55 set temp2_hyst 55
set temp2_over 60 set temp2_over 60
set temp3_hyst 60 set temp3_hyst 60
set temp3_over 65 set temp3_over 65
set temp4_hyst 60
set temp4_over 65
set fan1_min 3000 set fan1_min 3000
set fan2_min 3000 set fan2_min 3000

6
lib/chips.c
View File

@@ -2762,7 +2762,11 @@ static sensors_chip_feature vt1211_features[] =
{ SENSORS_VT1211_ALARMS, "alarms", SENSORS_NO_MAPPING, SENSORS_NO_MAPPING, { SENSORS_VT1211_ALARMS, "alarms", SENSORS_NO_MAPPING, SENSORS_NO_MAPPING,
SENSORS_MODE_R, VT1211_SYSCTL_ALARMS, VALUE(1), 0 }, SENSORS_MODE_R, VT1211_SYSCTL_ALARMS, VALUE(1), 0 },
{ SENSORS_VT1211_VID, "vid", SENSORS_NO_MAPPING, SENSORS_NO_MAPPING, { SENSORS_VT1211_VID, "vid", SENSORS_NO_MAPPING, SENSORS_NO_MAPPING,
SENSORS_MODE_R, VT1211_SYSCTL_VID, VALUE(1), 0 }, SENSORS_MODE_R, VT1211_SYSCTL_VID, VALUE(1), 3 },
{ SENSORS_VT1211_VRM, "vrm", SENSORS_NO_MAPPING, SENSORS_NO_MAPPING,
SENSORS_MODE_R, VT1211_SYSCTL_VRM, VALUE(1), 1 },
{ SENSORS_VT1211_UCH, "config", SENSORS_NO_MAPPING, SENSORS_NO_MAPPING,
SENSORS_MODE_R, VT1211_SYSCTL_UCH, VALUE(1), 0 },
{ 0 } { 0 }
}; };

2
lib/chips.h
View File

@@ -1184,6 +1184,8 @@
#define SENSORS_VT1211_FAN2_DIV 76 /* RW */ #define SENSORS_VT1211_FAN2_DIV 76 /* RW */
#define SENSORS_VT1211_ALARMS 81 /* R */ #define SENSORS_VT1211_ALARMS 81 /* R */
#define SENSORS_VT1211_VID 82 /* R */ #define SENSORS_VT1211_VID 82 /* R */
#define SENSORS_VT1211_VRM 83 /* RW */
#define SENSORS_VT1211_UCH 84 /* RW */
#define SENSORS_SMSC47M1_PREFIX "smsc47m1" #define SENSORS_SMSC47M1_PREFIX "smsc47m1"