mirror of
https://github.com/lm-sensors/lm-sensors
synced 2025-08-31 14:25:39 +00:00
(Phil) Fixed some bugs in src/eeprom.c and added more stuff
to /prog/eeprom/decode-dimms.pl git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@94 7894878c-1315-0410-8ee3-d5d059ff63e0
This commit is contained in:
Philip Edelbrock
@@ -40,7 +40,7 @@ DECODE_DIMMS.PL
|
||||
---------------
|
||||
|
||||
This Perl script attempts to make sense of the first 128 bytes of a SDRAM
|
||||
DIMM. Using the 'Serial Presence Detect (SPD)' Spec (Rev1.2a)** from
|
||||
PC-100 DIMM. Using the 'Serial Presence Detect (SPD)' Spec (Rev1.2a)** from
|
||||
Intel. When finished, it will decode and report all the values defined in
|
||||
the spec. Much of the information is technical timing and interfacing info
|
||||
(probably not all used by the Bios or clocking IC.
|
||||
@@ -77,7 +77,7 @@ which may not be the case.
|
||||
|
||||
|
||||
------------------------------------------------------------------------
|
||||
** PDF is available from Intel or our web site:
|
||||
** PDF is available from Intel or our web site (spdsd12a.pdf):
|
||||
http://www.netroedge.com/~lm78
|
||||
|
||||
"eeprom" doc created Dec. 14, 1998 by Philip Edelbrock
|
||||
|
||||
@@ -106,7 +106,9 @@ static ctl_table eeprom_dir_table_template[] = {
|
||||
&sensors_sysctl_real, NULL, &eeprom_contents },
|
||||
{ EEPROM_SYSCTL6, "data80-95", NULL, 0, 0644, NULL, &sensors_proc_real,
|
||||
&sensors_sysctl_real, NULL, &eeprom_contents },
|
||||
{ EEPROM_SYSCTL7, "data96-127", NULL, 0, 0644, NULL, &sensors_proc_real,
|
||||
{ EEPROM_SYSCTL7, "data96-111", NULL, 0, 0644, NULL, &sensors_proc_real,
|
||||
&sensors_sysctl_real, NULL, &eeprom_contents },
|
||||
{ EEPROM_SYSCTL8, "data112-127", NULL, 0, 0644, NULL, &sensors_proc_real,
|
||||
&sensors_sysctl_real, NULL, &eeprom_contents },
|
||||
{ 0 }
|
||||
};
|
||||
@@ -310,6 +312,7 @@ void eeprom_contents(struct i2c_client *client, int operation, int ctl_name,
|
||||
if (ctl_name == EEPROM_SYSCTL5){ base=64; }
|
||||
if (ctl_name == EEPROM_SYSCTL6){ base=80; }
|
||||
if (ctl_name == EEPROM_SYSCTL7){ base=96; }
|
||||
if (ctl_name == EEPROM_SYSCTL8){ base=112; }
|
||||
|
||||
if (operation == SENSORS_PROC_REAL_INFO)
|
||||
*nrels_mag = 0;
|
||||
|
||||
@@ -194,5 +194,6 @@ struct sensors_chips_data {
|
||||
#define EEPROM_SYSCTL5 1004
|
||||
#define EEPROM_SYSCTL6 1005
|
||||
#define EEPROM_SYSCTL7 1006
|
||||
#define EEPROM_SYSCTL8 1007
|
||||
|
||||
#endif /* def SENSORS_SENSORS_H */
|
||||
|
||||
@@ -2,7 +2,7 @@
|
||||
#
|
||||
# Copyright 1998, Philip Edelbrock <phil@netroedge.com>
|
||||
#
|
||||
# Version 0.2
|
||||
# Version 0.3
|
||||
#
|
||||
# EEPROM data decoding for SDRAM DIMM modules.
|
||||
#
|
||||
@@ -10,12 +10,17 @@
|
||||
# and Perl is at /usr/bin/perl
|
||||
#
|
||||
#
|
||||
# Reference: PC SDRAM Serial Presence
|
||||
# References:
|
||||
# PC SDRAM Serial Presence
|
||||
# Detect (SPD) Specification, Intel,
|
||||
# Dec '97, Rev 1.2A
|
||||
#
|
||||
#
|
||||
# Jedec Standards 4.1.x & 4.5.x
|
||||
# http://www.jedec.org
|
||||
#
|
||||
|
||||
print "SDRAM Serial Presence Detect Tester/Decoder\n";
|
||||
print "PC-100 DIMM Serial Presence Detect Tester/Decoder\n";
|
||||
print "Written by Philip Edelbrock. Copyright 1998.\n";
|
||||
print "Version 0.2\n\n";
|
||||
|
||||
@@ -26,6 +31,7 @@ $_=`ls /proc/sys/dev/sensors/`;
|
||||
for $i ( 0 .. $#dimm_list ) {
|
||||
$_=$dimm_list[$i];
|
||||
if (/^eeprom-/) {
|
||||
$dimm_checksum=0;
|
||||
$dimm_count=$dimm_count + 1;
|
||||
|
||||
print "\nDecoding EEPROM: /proc/sys/dev/sensors/$dimm_list[$i]\n";
|
||||
@@ -38,6 +44,8 @@ for $i ( 0 .. $#dimm_list ) {
|
||||
|
||||
$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/data0-15`;
|
||||
@bytes=split(" ");
|
||||
for $j ( 0 .. 15 ) { $dimm_checksum = $dimm_checksum + $bytes[$j]; }
|
||||
|
||||
print "\t# of bytes written to SDRAM EEPROM:\t\t$bytes[0]\n";
|
||||
|
||||
print "\tTotal number of bytes in EEPROM:\t\t";
|
||||
@@ -123,6 +131,7 @@ for $i ( 0 .. $#dimm_list ) {
|
||||
# Decode next 16 bytes
|
||||
$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/data16-31`;
|
||||
@bytes=split(" ");
|
||||
for $j ( 0 .. 15 ) { $dimm_checksum = $dimm_checksum + $bytes[$j]; }
|
||||
|
||||
print "\tBurst lengths supported:\t\t\t";
|
||||
$temp="";
|
||||
@@ -265,6 +274,9 @@ for $i ( 0 .. $#dimm_list ) {
|
||||
# Decode next 16 bytes (32-47)
|
||||
$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/data32-47`;
|
||||
@bytes=split(" ");
|
||||
for $j ( 0 .. 15 ) { $dimm_checksum = $dimm_checksum + $bytes[$j]; }
|
||||
|
||||
print "\t\t----=== The Following are Proposed and Apply to SDRAM DIMMs ===----\n";
|
||||
|
||||
print "\tCommand and Address Signal Setup Time:\t\t";
|
||||
if ($bytes[0] > 127) { $temp=($bytes[0]-128)>>4; $temp2=-1; } else { $temp=$bytes[0]>>4; $temp2=1;}
|
||||
@@ -287,6 +299,66 @@ for $i ( 0 .. $#dimm_list ) {
|
||||
print "nS\n";
|
||||
|
||||
# That's it for the lower part of an SDRAM EEPROM's memory!
|
||||
# Decode next 16 bytes (48-63)
|
||||
$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/data48-63`;
|
||||
@bytes=split(" ");
|
||||
for $j ( 0 .. 14 ) { $dimm_checksum = $dimm_checksum + $bytes[$j]; }
|
||||
|
||||
print "\tSPD Revision code:\t\t\t\t$bytes[14]\n";
|
||||
print "\tEEPROM Checksum of bytes 0-62:\t\t\t";
|
||||
printf("0x%.4X (verses calculated: 0x%.4X)\n",$bytes[15],$dimm_checksum);
|
||||
|
||||
# Decode next 16 bytes (64-79)
|
||||
$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/data64-79`;
|
||||
@bytes=split(" ");
|
||||
|
||||
print "\tManufacturer's JEDEC ID Code:\t\t\t";
|
||||
printf("0x%.4X%.4X%.4X%.4X%.4X%.4X%.4X%.4X\n",$bytes[0],$bytes[1],$bytes[2],$bytes[3],$bytes[4],$bytes[5],$bytes[6],$bytes[7]);
|
||||
|
||||
print "\tManufacturing Location Code:\t\t\t";
|
||||
printf("0x%.4X\n",$bytes[8]);
|
||||
|
||||
print "\tManufacurer's Part Number:\t\t\t\"";
|
||||
# Decode next 16 bytes (80-95)
|
||||
$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/data80-95`;
|
||||
@bytes2=split(" ");
|
||||
print pack("cccccccccccccccccc",$bytes[9],$bytes[10],$bytes[11],$bytes[12],$bytes[13],$bytes[14],$bytes[15],
|
||||
$bytes2[0],$bytes2[1],$bytes2[2],$bytes2[3],$bytes2[4],$bytes2[5],$bytes2[6],$bytes2[7],$bytes2[8],$bytes2[9]);
|
||||
print "\"\n";
|
||||
|
||||
print "\tRevision Code:\t\t\t\t\t";
|
||||
printf("0x%.4X%.4X\n",$bytes2[10],$bytes2[11]);
|
||||
|
||||
print "\tManufacturing Date:\t\t\t\t";
|
||||
printf("0x%.4X%.4X\n",$bytes2[12],$bytes2[13]);
|
||||
|
||||
print "\tAssembly Serial Number:\t\t\t\t";
|
||||
# Decode next 16 bytes (96-111)
|
||||
$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/data96-111`;
|
||||
@bytes=split(" ");
|
||||
|
||||
printf("0x%.4X%.4X%.4X%.4X\n",$bytes2[15],$bytes[0],$bytes[1],$bytes[2]);
|
||||
# Decode next 16 bytes (112-127)
|
||||
$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/data112-127`;
|
||||
@bytes=split(" ");
|
||||
|
||||
print "\tIntel Specification for Frequency:\t\t";
|
||||
if ($bytes[14] == 102) { print "66MHz\n"; } elsif ($bytes[14] == 100) { print "100MHz\n"; } else { print "Undefined!\n"; }
|
||||
|
||||
print "\tIntel Spec Details for 100MHz Support:\t\t";
|
||||
$temp="";
|
||||
if (($bytes[15] & 1) > 0) { print "${temp}Intel Concurrent AutoPrecharge\n"; $temp="\t\t\t\t\t\t\t";}
|
||||
if (($bytes[15] & 2) > 0) { print "${temp}CAS Latency = 2\n"; $temp="\t\t\t\t\t\t\t";}
|
||||
if (($bytes[15] & 4) > 0) { print "${temp}CAS Latency = 3\n"; $temp="\t\t\t\t\t\t\t";}
|
||||
if (($bytes[15] & 8) > 0) { print "${temp}Junction Temp A (90 degrees C)\n"; $temp="\t\t\t\t\t\t\t";}
|
||||
if (($bytes[15] & 8) == 0) { print "${temp}Junction Temp B (100 degrees C)\n"; $temp="\t\t\t\t\t\t\t";}
|
||||
if (($bytes[15] & 16) > 0) { print "${temp}CLK 3 Connected\n"; $temp="\t\t\t\t\t\t\t";}
|
||||
if (($bytes[15] & 32) > 0) { print "${temp}CLK 2 Connected\n"; $temp="\t\t\t\t\t\t\t";}
|
||||
if (($bytes[15] & 64) > 0) { print "${temp}CLK 1 Connected\n"; $temp="\t\t\t\t\t\t\t";}
|
||||
if (($bytes[15] & 128) > 0) { print "${temp}CLK 0 Connected\n"; $temp="\t\t\t\t\t\t\t";}
|
||||
if ($bytes[15] > 175) { print "${temp}Double Sided DIMM\n"; $temp="\t\t\t\t\t\t\t";
|
||||
} else {print "${temp}Single Sided DIMM\n"; $temp="\t\t\t\t\t\t\t";}
|
||||
|
||||
|
||||
}
|
||||
}
|
||||
|
||||
@@ -106,7 +106,9 @@ static ctl_table eeprom_dir_table_template[] = {
|
||||
&sensors_sysctl_real, NULL, &eeprom_contents },
|
||||
{ EEPROM_SYSCTL6, "data80-95", NULL, 0, 0644, NULL, &sensors_proc_real,
|
||||
&sensors_sysctl_real, NULL, &eeprom_contents },
|
||||
{ EEPROM_SYSCTL7, "data96-127", NULL, 0, 0644, NULL, &sensors_proc_real,
|
||||
{ EEPROM_SYSCTL7, "data96-111", NULL, 0, 0644, NULL, &sensors_proc_real,
|
||||
&sensors_sysctl_real, NULL, &eeprom_contents },
|
||||
{ EEPROM_SYSCTL8, "data112-127", NULL, 0, 0644, NULL, &sensors_proc_real,
|
||||
&sensors_sysctl_real, NULL, &eeprom_contents },
|
||||
{ 0 }
|
||||
};
|
||||
@@ -310,6 +312,7 @@ void eeprom_contents(struct i2c_client *client, int operation, int ctl_name,
|
||||
if (ctl_name == EEPROM_SYSCTL5){ base=64; }
|
||||
if (ctl_name == EEPROM_SYSCTL6){ base=80; }
|
||||
if (ctl_name == EEPROM_SYSCTL7){ base=96; }
|
||||
if (ctl_name == EEPROM_SYSCTL8){ base=112; }
|
||||
|
||||
if (operation == SENSORS_PROC_REAL_INFO)
|
||||
*nrels_mag = 0;
|
||||
|
||||
@@ -194,5 +194,6 @@ struct sensors_chips_data {
|
||||
#define EEPROM_SYSCTL5 1004
|
||||
#define EEPROM_SYSCTL6 1005
|
||||
#define EEPROM_SYSCTL7 1006
|
||||
#define EEPROM_SYSCTL8 1007
|
||||
|
||||
#endif /* def SENSORS_SENSORS_H */
|
||||
|
||||
Reference in New Issue
Block a user