mir/lm-sensors
2
0
Fork 0
mirror of https://github.com/lm-sensors/lm-sensors synced 2025-08-30 05:48:07 +00:00
Code Issues Releases Wiki Activity

make separate w83697hf section

Browse Source 
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1262 7894878c-1315-0410-8ee3-d5d059ff63e0
This commit is contained in:
Mark D. Studebaker 2001-12-06 21:57:54 +00:00
parent 4bf479d8b3
commit c68991f7a0
1 changed files with 65 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

66
etc/sensors.conf.eg
View File

@ -343,7 +343,7 @@ chip "sis5595-*"
# set temp_over 40
# set temp_hyst 37
chip "w83782d-*" "w83783s-*" "w83627hf-*" "w83697hf-*"
chip "w83782d-*" "w83783s-*" "w83627hf-*"
# Same as above for w83781d except that in5 and in6 are computed differently.
# Rather than an internal inverting op amp, the 82d/83s use standard positive
@ -407,6 +407,70 @@ chip "w83782d-*" "w83783s-*" "w83627hf-*" "w83697hf-*"
# set temp3_hyst 47
chip "w83697hf-*"
# Same as above for w83781d except that in5 and in6 are computed differently.
# Rather than an internal inverting op amp, the 82d/83s use standard positive
# inputs and the negative voltages are level shifted by a 3.6V reference.
# The math is convoluted, so we hope that your motherboard
# uses the recommended resistor values.
# no in1 on this chip.
label in0 "VCore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
label in5 "-12V"
label in6 "-5V"
label in7 "V5SB"
label in8 "VBat"
compute in3 ((6.8/10)+1)*@ , @/((6.8/10)+1)
compute in4 ((28/10)+1)*@ , @/((28/10)+1)
compute in5 (5.14 * @) - 14.91 , (@ + 14.91) / 5.14
compute in6 (3.14 * @) - 7.71 , (@ + 7.71) / 3.14
compute in7 ((6.8/10)+1)*@ , @/((6.8/10)+1)
# 697HF does not have VID inputs so you MUST set your core
# voltage limits below. Currently set for 1.8V core.
# vvv
set in0_min 1.8 * 0.95
set in0_max 1.8 * 1.05
set in2_min 3.3 * 0.95
set in2_max 3.3 * 1.05
set in3_min 5.0 * 0.95
set in3_max 5.0 * 1.05
set in4_min 12 * 0.90
set in4_max 12 * 1.10
set in5_min -12 * 0.90
set in5_max -12 * 1.10
set in6_min -5 * 0.95
set in6_max -5 * 1.05
set in7_min 5 * 0.95
set in7_max 5 * 1.05
set in8_min 3.0 * 0.80
set in8_max 3.0 * 1.20
# set up sensor types (thermistor is default)
# 1 = PII/Celeron Diode; 2 = 3904 transistor;
# 3435 = thermistor with Beta = 3435
# If temperature changes very little, try 1 or 2.
# set sensor1 1
# set sensor2 2
# set sensor3 3435
# examples for temperature limits
# set temp1_over 40
# set temp1_hyst 37
# set temp2_over 52
# set temp2_hyst 47
# set temp3_over 52
# set temp3_hyst 47
chip "as99127f-*"
# Same as above for w83782d except that in5 and in6 negative voltages