From dbc993ac93350de19ceed9fbae628abfc7979ce2 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Thu, 29 Apr 2004 19:53:27 +0000
Subject: [PATCH] Default configuration section for LM85-like chips.

git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2491 7894878c-1315-0410-8ee3-d5d059ff63e0
---
 etc/sensors.conf.eg | 72 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 72 insertions(+)

diff --git a/etc/sensors.conf.eg b/etc/sensors.conf.eg
index e1c6ff7f..43d10b5a 100644
--- a/etc/sensors.conf.eg
+++ b/etc/sensors.conf.eg
@@ -1953,3 +1953,75 @@ chip "asb100-*"
     set fan3_div 2
     set fan3_min 4000
 
+#
+# Sample configuration for the Intel S845WD1-E
+# courtesy of Marcus Schopen
+#
+chip "lm85c-*" "adm1027-*" "adt7463-*" "lm85-*" "lm85b-*"
+
+   set temp1_max 50
+
+# Voltage inputs
+   label in0   "V1.5"      # AGP on Intel S845WD1-E
+   label in1   "VCore"
+   label in2   "V3.3"
+   label in3   "V5"
+   label in4   "V12"
+
+# Temperature inputs
+   label temp1  "CPU"
+   label temp2  "Board"
+   label temp3  "Remote"
+
+# Fan inputs
+   label fan1   "CPU_Fan"
+#   label fan2   "Fan2"
+#   label fan3   "Fan3"
+#   label fan4   "Fan4"
+
+# PWM Outputs
+   label pwm1   "CPU_PWM"
+   label pwm2   "Fan2_PWM"
+   label pwm3   "Fan3_PWM"
+
+# Voltage scaling is done on-chip.  No 'compute' directive
+# should be necessary.  If in0 has external scaling set
+# it here.
+
+#   compute in0  @ * 2.5,   @ / 2.5
+
+# Adjust fans speeds for actual pulses per rev
+#   compute fan1  @ * 2,  @ / 2    # 1 pulse per rev
+#   set fan1_ppr  1                # ADM1027 or ADT7463
+#   compute fan2  @ / 2,  @ * 2    # 4 pulse per rev
+#   set fan2_ppr  4                # ADM1027 or ADT7463
+
+   ignore fan2
+   ignore fan3
+   ignore fan4
+
+# Set VRM version
+   set vrm  9.1   # Pentium 4
+
+# Set voltage limits
+   set in0_min  1.5 * 0.95
+   set in0_max  1.5 * 1.05
+   set in1_min  vid * 0.95
+   set in1_max  vid * 1.05
+   set in2_min  3.3 * 0.95
+   set in2_max  3.3 * 1.05
+   set in3_min  5.0 * 0.95
+   set in3_max  5.0 * 1.05
+   set in4_min   12 * 0.95
+   set in4_max   12 * 1.05
+
+# Set Fan limits
+   set fan1_min 4000
+
+# Set Temp Limits
+   set temp1_min 10
+   set temp1_max 50
+   set temp2_min 10
+   set temp2_max 35
+   set temp3_min 10
+   set temp3_max 35