diff --git a/prog/detect/sensors-detect b/prog/detect/sensors-detect
index 67f24e37..55aa73bf 100755
--- a/prog/detect/sensors-detect
+++ b/prog/detect/sensors-detect
@@ -1194,6 +1194,26 @@ use vars qw(@i2c_adapter_names);
 		driver => "to-be-written",
 		i2c_addrs => [0x2f],
 		i2c_detect => sub { fintek_detect(@_, 7); },
+	}, {
+		name => "SMSC EMC1023",
+		driver => "to-be-written",	# emc1023
+		i2c_addrs => [0x48, 0x49, 0x4c, 0x4d],
+		i2c_detect => sub { emc1023_detect(@_, 0); },
+	}, {
+		name => "SMSC EMC1043",
+		driver => "to-be-written",	# emc1023
+		i2c_addrs => [0x48, 0x49, 0x4c, 0x4d],
+		i2c_detect => sub { emc1023_detect(@_, 1); },
+	}, {
+		name => "SMSC EMC1053",
+		driver => "to-be-written",	# emc1023
+		i2c_addrs => [0x48, 0x49, 0x4c, 0x4d],
+		i2c_detect => sub { emc1023_detect(@_, 2); },
+	}, {
+		name => "SMSC EMC1063",
+		driver => "to-be-written",	# emc1023
+		i2c_addrs => [0x48, 0x49, 0x4c, 0x4d],
+		i2c_detect => sub { emc1023_detect(@_, 3); },
 	}, {
 		name => "SMSC EMC1403",
 		driver => "emc1403",
@@ -5372,6 +5392,48 @@ sub fintek_detect
 	return 7;
 }
 
+# Chips to detect: 0 = EMC1023, 1 = EMC1043, 2 = EMC1053, 3 = EMC1063
+# Registers used:
+#   0xed: Device ID register
+#   0xfe: Vendor ID register
+#   0xff: Revision register
+sub emc1023_detect
+{
+	my ($file, $addr, $chip) = @_;
+	my $dev_id = i2c_smbus_read_byte_data($file, 0xed);
+	my $man_id = i2c_smbus_read_byte_data($file, 0xfe);
+	my $rev = i2c_smbus_read_byte_data($file, 0xff);
+
+	return unless $man_id == 0x5d;  # SMSC
+	return unless $rev <= 1;
+
+	if ($chip == 0) {
+		return if ($addr == 0x4c) && ($dev_id != 0x04);	# EMC1023-1
+		return if ($addr == 0x4d) && ($dev_id != 0x05);	# EMC1023-2
+		return if ($addr == 0x48) && ($dev_id != 0x06);	# EMC1023-3
+		return if ($addr == 0x49) && ($dev_id != 0x07);	# EMC1023-4
+	} elsif ($chip == 1) {
+		if ($addr == 0x4c) {				# EMC1043-1, EMC1043-5
+			return unless ($dev_id == 0x0c) || ($dev_id == 0x2c);
+		}
+		return if ($addr == 0x4d) && ($dev_id != 0x0d);	# EMC1043-2
+		return if ($addr == 0x48) && ($dev_id != 0x0e);	# EMC1043-3
+		return if ($addr == 0x49) && ($dev_id != 0x0f);	# EMC1043-4
+	} elsif ($chip == 2) {
+		return if ($addr == 0x4c) && ($dev_id != 0x3c);	# EMC1053-1
+		return if ($addr == 0x4d) && ($dev_id != 0x3d);	# EMC1053-2
+		return if ($addr == 0x48) && ($dev_id != 0x3e);	# EMC1053-3
+		return if ($addr == 0x49) && ($dev_id != 0x3f);	# EMC1053-4
+	} elsif ($chip == 3) {
+		return if ($addr == 0x4c) && ($dev_id != 0x30);	# EMC1063-1
+		return if ($addr == 0x4d) && ($dev_id != 0x31);	# EMC1063-2
+		return if ($addr == 0x48) && ($dev_id != 0x32);	# EMC1063-3
+		return if ($addr == 0x49) && ($dev_id != 0x33);	# EMC1063-4
+	}
+
+	return 7;
+}
+
 # Chip to detect: 0 = EMC1403, 1 = EMC1404, 2 = EMC2103, 3 = EMC1423
 # Registers used:
 #   0xfd: Device ID register