I added two new make file 'includes': busses/Module.mk and chips/Module.mk
Frodo- You may want to review the makefile structure to make sure that
the system works as you intended.
Note: The docs still need to be updated to reflect the new file arrangement,
but at least it builds!
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@176 7894878c-1315-0410-8ee3-d5d059ff63e0
* (module) VIN limits are now set to sane values (3V instead of 30V, which
caused nasty overflows)
* (module) VIN limits had min/max swapped in gl518_attach_adapter
* (lib) TEMP_HYST used the VID sysctl instead of the TEMP sysctl, leading
to bogus readings
* (sensors) print n/a for gl518 not available readings.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@145 7894878c-1315-0410-8ee3-d5d059ff63e0
* Force the Winbond into bank 0 before anything else is done
* Copied fan_div patch from lm78.c
* Copied IN_{FROM,TO}_REG patch from lm78.c
* Copied alarms computation bug fix from lm78.c
* Nicer way of managing banks: the bank number to access is now the high
byte of the (as u16 declared) register number. Only
w38781d_{read,write}_value needs now to be aware of banks. Also, the
w38781d_{read,write}_value functions now know that sensors 2 and temp, hyst
and over registers are word-sized.
* Introduced fan_div for FAN3 and 9-bit temperature readings.
* Made beep file work like the gl518sm one
* Corrected small VID problem (bit 4 was read from the wrong register)
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@121 7894878c-1315-0410-8ee3-d5d059ff63e0
This file consists of two numbers: the first is either 0 (global sound
alarm disable) or 1 (enable), the second is in the same encoding as the
'alarm' file and determines for which alarms the speaker will sound.
The new file was added to the module, the library and the sensors application.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@112 7894878c-1315-0410-8ee3-d5d059ff63e0
Some basic support, in the form of sensors_get_all_features(), for chips that
are known to the library, but unknown to the application. prog/sensors has
a demo of how to use this, in function print_unknown_chip in chips.c.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@110 7894878c-1315-0410-8ee3-d5d059ff63e0
