Release version 0.1.5. Added support for AMD family 0Fh CPUs. Fixed saving of wrong window size values for minimized forms (by not saving them).

This commit is contained in:
Michael Möller 2010-01-31 20:57:18 +00:00
parent 1f922873de
commit 92f872b244
7 changed files with 230 additions and 8 deletions

View File

@ -238,10 +238,12 @@ namespace OpenHardwareMonitor.GUI {
Utilities.Config.Set(tempMenuItem.Name, tempMenuItem.Checked);
Utilities.Config.Set(fansMenuItem.Name, fansMenuItem.Checked);
Utilities.Config.Set("mainForm.Location.X", Location.X);
Utilities.Config.Set("mainForm.Location.Y", Location.Y);
Utilities.Config.Set("mainForm.Width", Width);
Utilities.Config.Set("mainForm.Height", Height);
if (WindowState != FormWindowState.Minimized) {
Utilities.Config.Set("mainForm.Location.X", Location.X);
Utilities.Config.Set("mainForm.Location.Y", Location.Y);
Utilities.Config.Set("mainForm.Width", Width);
Utilities.Config.Set("mainForm.Height", Height);
}
foreach (IGroup group in groupList)
group.Close();

136
Hardware/CPU/AMD0FCPU.cs Normal file
View File

@ -0,0 +1,136 @@
/*
Version: MPL 1.1/GPL 2.0/LGPL 2.1
The contents of this file are subject to the Mozilla Public License Version
1.1 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.mozilla.org/MPL/
Software distributed under the License is distributed on an "AS IS" basis,
WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
for the specific language governing rights and limitations under the License.
The Original Code is the Open Hardware Monitor code.
The Initial Developer of the Original Code is
Michael Möller <m.moeller@gmx.ch>.
Portions created by the Initial Developer are Copyright (C) 2009-2010
the Initial Developer. All Rights Reserved.
Contributor(s):
Alternatively, the contents of this file may be used under the terms of
either the GNU General Public License Version 2 or later (the "GPL"), or
the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
in which case the provisions of the GPL or the LGPL are applicable instead
of those above. If you wish to allow use of your version of this file only
under the terms of either the GPL or the LGPL, and not to allow others to
use your version of this file under the terms of the MPL, indicate your
decision by deleting the provisions above and replace them with the notice
and other provisions required by the GPL or the LGPL. If you do not delete
the provisions above, a recipient may use your version of this file under
the terms of any one of the MPL, the GPL or the LGPL.
*/
using System;
using System.Collections.Generic;
using System.Drawing;
using System.Text;
namespace OpenHardwareMonitor.Hardware.CPU {
public class AMD0FCPU : IHardware {
private string name;
private Image icon;
private uint pciAddress;
private Sensor[] coreTemperatures;
private float offset;
private const ushort PCI_AMD_VENDOR_ID = 0x1022;
private const ushort PCI_AMD_0FH_MISCELLANEOUS_DEVICE_ID = 0x1103;
private const uint THERMTRIP_STATUS_REGISTER = 0xE4;
private const byte THERM_SENSE_CORE_SEL_CPU0 = 0x2;
private const byte THERM_SENSE_CORE_SEL_CPU1 = 0x0;
public AMD0FCPU(string name, uint family, uint model, uint stepping,
uint[,] cpuidData, uint[,] cpuidExtData) {
this.name = name;
this.icon = Utilities.EmbeddedResources.GetImage("cpu.png");
uint coreCount = 1;
if (cpuidExtData.GetLength(0) > 8)
coreCount = (cpuidExtData[8, 2] & 0xFF) + 1;
// max two cores
coreCount = coreCount > 2 ? 2 : coreCount;
coreTemperatures = new Sensor[coreCount];
for (int i = 0; i < coreCount; i++)
coreTemperatures[i] =
new Sensor("Core #" + (i + 1), i, SensorType.Temperature, this);
pciAddress = WinRing0.FindPciDeviceById(PCI_AMD_VENDOR_ID,
PCI_AMD_0FH_MISCELLANEOUS_DEVICE_ID, 0);
offset = -49.0f;
// AM2+ 65nm +21 offset
if (model >= 0x69 && model != 0xc1 && model != 0x6c && model != 0x7c)
offset += 21;
Update();
}
public string Name {
get { return name; }
}
public string Identifier {
get { return "/amdcpu/0"; }
}
public Image Icon {
get { return icon; }
}
public ISensor[] Sensors {
get {
return coreTemperatures;
}
}
public string GetReport() {
return null;
}
public void Update() {
if (pciAddress == 0xFFFFFFFF)
return;
for (uint i = 0; i < coreTemperatures.Length; i++) {
if (WinRing0.WritePciConfigDwordEx(
pciAddress, THERMTRIP_STATUS_REGISTER,
i > 0 ? THERM_SENSE_CORE_SEL_CPU1 : THERM_SENSE_CORE_SEL_CPU0)) {
uint value;
if (WinRing0.ReadPciConfigDwordEx(
pciAddress, THERMTRIP_STATUS_REGISTER, out value))
coreTemperatures[i].Value = ((value >> 16) & 0xFF) + offset;
}
}
}
#pragma warning disable 67
public event SensorEventHandler SensorAdded;
public event SensorEventHandler SensorRemoved;
#pragma warning restore 67
}
}

View File

@ -139,6 +139,10 @@ namespace OpenHardwareMonitor.Hardware.CPU {
// check if processor supports a digital thermal sensor
if (maxCPUID_EXT >= 7 && (cpuidExtData[7, 3] & 1) != 0) {
switch (family) {
case 0x0F:
hardware.Add(new AMD0FCPU(name, family, model, stepping,
cpuidData, cpuidExtData));
break;
case 0x10:
hardware.Add(new AMD10CPU(name, family, model, stepping,
cpuidData, cpuidExtData));

View File

@ -1,4 +1,41 @@
using System;
/*
Version: MPL 1.1/GPL 2.0/LGPL 2.1
The contents of this file are subject to the Mozilla Public License Version
1.1 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.mozilla.org/MPL/
Software distributed under the License is distributed on an "AS IS" basis,
WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
for the specific language governing rights and limitations under the License.
The Original Code is the Open Hardware Monitor code.
The Initial Developer of the Original Code is
Michael Möller <m.moeller@gmx.ch>.
Portions created by the Initial Developer are Copyright (C) 2009-2010
the Initial Developer. All Rights Reserved.
Contributor(s):
Alternatively, the contents of this file may be used under the terms of
either the GNU General Public License Version 2 or later (the "GPL"), or
the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
in which case the provisions of the GPL or the LGPL are applicable instead
of those above. If you wish to allow use of your version of this file only
under the terms of either the GPL or the LGPL, and not to allow others to
use your version of this file under the terms of the MPL, indicate your
decision by deleting the provisions above and replace them with the notice
and other provisions required by the GPL or the LGPL. If you do not delete
the provisions above, a recipient may use your version of this file under
the terms of any one of the MPL, the GPL or the LGPL.
*/
using System;
using System.Collections.Generic;
using System.Drawing;
using System.Text;

View File

@ -90,6 +90,8 @@ namespace OpenHardwareMonitor.Hardware {
ushort deviceId, byte index);
public delegate bool ReadPciConfigDwordExDelegate(uint pciAddress,
uint regAddress, out uint value);
public delegate bool WritePciConfigDwordExDelegate(uint pciAddress,
uint regAddress, uint value);
private static InitializeOlsDelegate InitializeOls;
private static DeinitializeOlsDelegate DeinitializeOls;
@ -103,6 +105,8 @@ namespace OpenHardwareMonitor.Hardware {
public static SetPciMaxBusIndexDelegate SetPciMaxBusIndex;
public static FindPciDeviceByIdDelegate FindPciDeviceById;
public static ReadPciConfigDwordExDelegate ReadPciConfigDwordEx;
public static WritePciConfigDwordExDelegate WritePciConfigDwordEx;
private static void GetDelegate<T>(string entryPoint, out T newDelegate)
where T : class
@ -127,6 +131,7 @@ namespace OpenHardwareMonitor.Hardware {
GetDelegate("SetPciMaxBusIndex", out SetPciMaxBusIndex);
GetDelegate("FindPciDeviceById", out FindPciDeviceById);
GetDelegate("ReadPciConfigDwordEx", out ReadPciConfigDwordEx);
GetDelegate("WritePciConfigDwordEx", out WritePciConfigDwordEx);
try {
if (InitializeOls != null && InitializeOls())

View File

@ -58,6 +58,7 @@
<ItemGroup>
<Compile Include="GUI\TypeNode.cs" />
<Compile Include="Hardware\CPU\AMD10CPU.cs" />
<Compile Include="Hardware\CPU\AMD0FCPU.cs" />
<Compile Include="Hardware\HDD\HDD.cs" />
<Compile Include="Hardware\HDD\HDDGroup.cs" />
<Compile Include="Hardware\HDD\SMART.cs" />

View File

@ -1,4 +1,41 @@
using System.Reflection;
/*
Version: MPL 1.1/GPL 2.0/LGPL 2.1
The contents of this file are subject to the Mozilla Public License Version
1.1 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.mozilla.org/MPL/
Software distributed under the License is distributed on an "AS IS" basis,
WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
for the specific language governing rights and limitations under the License.
The Original Code is the Open Hardware Monitor code.
The Initial Developer of the Original Code is
Michael Möller <m.moeller@gmx.ch>.
Portions created by the Initial Developer are Copyright (C) 2009-2010
the Initial Developer. All Rights Reserved.
Contributor(s):
Alternatively, the contents of this file may be used under the terms of
either the GNU General Public License Version 2 or later (the "GPL"), or
the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
in which case the provisions of the GPL or the LGPL are applicable instead
of those above. If you wish to allow use of your version of this file only
under the terms of either the GPL or the LGPL, and not to allow others to
use your version of this file under the terms of the MPL, indicate your
decision by deleting the provisions above and replace them with the notice
and other provisions required by the GPL or the LGPL. If you do not delete
the provisions above, a recipient may use your version of this file under
the terms of any one of the MPL, the GPL or the LGPL.
*/
using System.Reflection;
using System.Runtime.CompilerServices;
using System.Runtime.InteropServices;
@ -32,5 +69,5 @@ using System.Runtime.InteropServices;
// You can specify all the values or you can default the Build and Revision Numbers
// by using the '*' as shown below:
// [assembly: AssemblyVersion("1.0.*")]
[assembly: AssemblyVersion("0.1.4.0")]
[assembly: AssemblyFileVersion("0.1.4.0")]
[assembly: AssemblyVersion("0.1.5.0")]
[assembly: AssemblyFileVersion("0.1.5.0")]