If the userspace wants to match on a flow with some tunnel attributesset to 0,
it simply omits them in the netlink attributes stream.
Since our wildcarding logic (when megaflows are disabled) is based on the
attributes in the netlink stream, we set our mask incorrectly.
This commit adds a check to detect if the userspace wants to match on a tunnel,
in which case we simply unwildcard the whole tun_key
Reported-by: Andy Zhou <azhou@nicira.com>
Signed-off-by: Daniele Di Proietto <ddiproietto@vmware.com>
Signed-off-by: Andy Zhou <azhou@nicira.com>
Commit 62974663fe (datapath/flow_netlink: Create right mask with
disabled megaflows) introduced the bug which caused
ovs_nla_get_match() returns immediately after parsing the flow
mask for OVS_KEY_ATTR_ENCAP. Consequently, when vlan encapsulated
packets are present, the corresponding datapath flows will have
incorrect mask like below. And the incorrect flows could affect
other non-vlan packets.
~/ovs# ovs-dpctl dump-flows
in_port(3/0xffff0000),eth_type(0x8100),encap(), packets:0,
bytes:0, used:never, actions:2
This commit fixes the bug by checking and handling the return
value of the parsing function correctly.
Signed-off-by: Alex Wang <alexw@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
If megaflows are disabled, the userspace does not send the netlink attribute
OVS_FLOW_ATTR_MASK, and the kernel must create an exact match mask.
sw_flow_mask_set() sets every bytes (in 'range') of the mask to 0xff, even the
bytes that represent padding for struct sw_flow, or the bytes that represent
fields that may not be set during ovs_flow_extract().
This is a problem, because when we extract a flow from a packet,
we do not memset() anymore the struct sw_flow to 0 (since commit 9cef26ac6a).
This commit gets rid of sw_flow_mask_set() and introduces mask_set_nlattr(),
which operates on the netlink attributes rather than on the mask key. Using
this approach we are sure that only the bytes that the user provided in the
flow are matched.
Also, if the parse_flow_mask_nlattrs() for the mask ENCAP attribute fails, we
now return with an error.
Reported-by: Alex Wang <alexw@nicira.com>
Suggested-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Daniele Di Proietto <ddiproietto@vmware.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
match_validate() enforce that a mask matching on NDP attributes has also an
exact match on ICMPv6 type.
The ICMPv6 type, which is 8-bit wide, is stored in the 'tp.src' field of
'struct sw_flow_key', which is 16-bit wide.
Therefore, an exact match on ICMPv6 type should only check the first 8 bits.
This commit fixes a bug that prevented flows with an exact match on NDP field
from being installed
Signed-off-by: Daniele Di Proietto <ddiproietto@vmware.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
There are many possible ways that a flow can be invalid so we've
added logging for most of them. This adds logs for the remaining
possible cases so there isn't any ambiguity while debugging.
CC: Federico Iezzi <fiezzi@enter.it>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Acked-by: Thomas Graf <tgraf@noironetworks.com>
This patch loosens the restrictions surrounding push and pop MPLS actions
such that they will be allowed after a pop VLAN action if the inner
ethernet type is acceptable for pop and push MPLS actions. This implies
that there is only one VLAN tag present.
Some analysis of logic of this change is as follows:
The purpose of tracking vlan_tci is to allow prohibition of push
and pop MPLS actions in the presence of a VLAN. In this scenario
the VLAN_TAG_PRESENT bit of vlan_tci is set and eth_type is that of
the packet with the outermost VLAN tag removed.
A pop VLAN action may clear vlan_tci as it removes the outermost
VLAN tag and the push and pop MPLS logic may rely on eth_type for
their prohibition logic.
This will not allow push and pop MPLS on packets with multiple VLAN
tags, regardless of if they are all remove using POP VLAN, as there
is no mechanism to expose the inner ethernet type beyond that of
the outermost VLAN tag.
Suggested-by: Jesse Gross <jgross@nicira.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Allow datapath to recognize and extract MPLS labels into flow keys
and execute actions which push, pop, and set labels on packets.
Based heavily on work by Leo Alterman, Ravi K, Isaku Yamahata and Joe Stringer.
Cc: Ravi K <rkerur@gmail.com>
Cc: Leo Alterman <lalterman@nicira.com>
Cc: Isaku Yamahata <yamahata@valinux.co.jp>
Cc: Joe Stringer <joe@wand.net.nz>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Jesse Gross <jesse@nicira.com>
This adds support for Geneve - Generic Network Virtualization
Encapsulation. The protocol is documented at
http://tools.ietf.org/html/draft-gross-geneve-00
The kernel implementation is completely agnostic to the options
that are in use and can handle newly defined options without
further work. It does this by simply matching on a byte array
of options and allowing userspace to setup flows on this array.
Userspace currently implements only support for basic version of
Geneve. It can work with the base header (including the VNI) and
is capable of parsing options but does not currently support any
particular option definitions. Over time, the intention is to
allow options to be matched through OpenFlow without requiring
explicit support in OVS userspace.
Signed-off-by: Jesse Gross <jesse@nicira.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Some tunnel formats have mechanisms for indicating that packets are
OAM frames that should be handled specially (either as high priority or
not forwarded beyond an endpoint). This provides support for allowing
those types of packets to be matched.
Signed-off-by: Jesse Gross <jesse@nicira.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Currently, the flow information that is matched for tunnels and
the tunnel data passed around with packets is the same. However,
as additional information is added this is not necessarily desirable,
as in the case of pointers.
This adds a new structure for tunnel metadata which currently contains
only the existing struct. This change is purely internal to the kernel
since the current OVS_KEY_ATTR_IPV4_TUNNEL is simply a compressed version
of OVS_KEY_ATTR_TUNNEL that is translated at flow setup.
Signed-off-by: Jesse Gross <jesse@nicira.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Minimize padding in sw_flow_key and move 'tp' top the main struct.
These changes simplify code when accessing the transport port numbers
and the tcp flags, and makes the sw_flow_key 8 bytes smaller on 64-bit
systems (128->120 bytes). These changes also make the keys for IPv4
packets to fit in one cache line.
There is a valid concern for safety of packing the struct
ovs_key_ipv4_tunnel, as it would be possible to take the address of
the tun_id member as a __be64 * which could result in unaligned access
in some systems. However:
- sw_flow_key itself is 64-bit aligned, so the tun_id within is always
64-bit aligned.
- We never make arrays of ovs_key_ipv4_tunnel (which would force every
second tun_key to be misaligned).
- We never take the address of the tun_id in to a __be64 *.
- Whereever we use struct ovs_key_ipv4_tunnel outside the sw_flow_key,
it is in stack (on tunnel input functions), where compiler has full
control of the alignment.
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
The 'output' argument of the ovs_nla_put_flow() is the one from which
the bits are written to the netlink attributes. For SCTP we
accidentally used the bits from the 'swkey' instead. This caused the
mask attributes to include the bits from the actual flow key instead
of the mask.
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Bump kernel support for datapath module to include 3.12.
Make use of native ip-tunnel API for Kernel >= 3.12.
Based on patch from James Page.
Signed-off-by: James Page <james.page@ubuntu.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Reviewed-by: Kyle Mestery <mestery@noironetworks.com>
The 5-tuple optimization becomes unnecessary with a later per-NUMA
node stats patch. Remove it first to make the changes easier to
grasp.
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Add "openvswitch: " prefix to OVS_NLERR output
to match the other OVS_NLERR output of datapath.c
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
This is necessary, since u64 is not unsigned long long
in all architectures: u64 could be also uint64_t.
Signed-off-by: Daniele Di Proietto <daniele.di.proietto@gmail.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
In few functions, const formal parameters are assigned or cast to
non-const.
These changes suppress warnings if compiled with -Wcast-qual.
Signed-off-by: Daniele Di Proietto <daniele.di.proietto@gmail.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Use percpu allocator for stats due to objection to stats array.
But percpu allocator is not designed for high churn allocation/
deallcation. so we need to avoid allocating percpu flow for
short lived flows. One cheaper way to detect flow is by checking
if 5-tuple used in RSS are masked or not. if any one of them is
masked, flow is likely shared across CPU where percpu stat
should be more scalable. And that flow should be relatively
long lived flow.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Jesse Gross <jesse@nicira.com>
tcp_flags=flags/mask
Bitwise match on TCP flags. The flags and mask are 16-bit num‐
bers written in decimal or in hexadecimal prefixed by 0x. Each
1-bit in mask requires that the corresponding bit in port must
match. Each 0-bit in mask causes the corresponding bit to be
ignored.
TCP protocol currently defines 9 flag bits, and additional 3
bits are reserved (must be transmitted as zero), see RFCs 793,
3168, and 3540. The flag bits are, numbering from the least
significant bit:
0: FIN No more data from sender.
1: SYN Synchronize sequence numbers.
2: RST Reset the connection.
3: PSH Push function.
4: ACK Acknowledgement field significant.
5: URG Urgent pointer field significant.
6: ECE ECN Echo.
7: CWR Congestion Windows Reduced.
8: NS Nonce Sum.
9-11: Reserved.
12-15: Not matchable, must be zero.
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Jesse Gross <jesse@nicira.com>
Over the time datapath.c and flow.c has became pretty large files.
Following patch restructures functionality of component into three
different components:
flow.c: contains flow extract.
flow_netlink.c: netlink flow api.
flow_table.c: flow table api.
Diffstat is showing wrong count. This patch mostly restructures code
without changing logic.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Jesse Gross <jesse@nicira.com>
