2
0
mirror of https://github.com/openvswitch/ovs synced 2025-08-22 18:07:40 +00:00
ovs/lib/netdev.c

1434 lines
48 KiB
C
Raw Normal View History

/*
datapath: Consider tunnels to have no MTU, fixing jumbo frame support. Until now, tunnel vports have had a specific MTU, in the same way that ordinary network devices have an MTU, but treating them this way does not always make sense. For example, consider a datapath that has three ports: the local port, a GRE tunnel to another host, and a physical port. If the physical port is configured with a jumbo MTU, it should be possible to send jumbo packets across the tunnel: the tunnel can do fragmentation or the physical port traversed by the tunnel might have a jumbo MTU. However, until now, tunnels always had a 1500-byte MTU by default. It could be adjusted using ODP_VPORT_MTU_SET, but nothing actually did this. One alternative would be to make ovs-vswitchd able to set the vport's MTU. This commit, however, takes a different approach, of dropping the concept of MTU entirely for tunnel vports. This also solves the problem described above, without making any additional work for anyone. I tested that, without this change, I could not send 1600-byte "pings" between two machines whose NICs had 2000-byte MTUs that were connected to vswitches that were in turn connected over GRE tunnels with the default 1500-byte MTU. With this change, it worked OK, regardless of the MTU of the network traversed by the GRE tunnel. This patch also makes "patch" ports MTU-less. It might make sense to remove vport_set_mtu() and the associated callback now, since ordinary network devices are the only vports that support it now. Signed-off-by: Ben Pfaff <blp@nicira.com> Suggested-by: Jesse Gross <jesse@nicira.com> Acked-by: Jesse Gross <jesse@nicira.com> Bug #3728.
2011-02-01 11:32:06 -08:00
* Copyright (c) 2008, 2009, 2010, 2011 Nicira Networks.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include <config.h>
#include "netdev.h"
#include <assert.h>
#include <errno.h>
#include <inttypes.h>
#include <netinet/in.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include "coverage.h"
#include "dynamic-string.h"
#include "fatal-signal.h"
#include "hash.h"
#include "list.h"
#include "netdev-provider.h"
#include "netdev-vport.h"
#include "ofpbuf.h"
#include "openflow/openflow.h"
#include "packets.h"
#include "poll-loop.h"
#include "shash.h"
#include "sset.h"
#include "svec.h"
#include "vlog.h"
VLOG_DEFINE_THIS_MODULE(netdev);
COVERAGE_DEFINE(netdev_received);
COVERAGE_DEFINE(netdev_sent);
COVERAGE_DEFINE(netdev_add_router);
COVERAGE_DEFINE(netdev_get_stats);
static struct shash netdev_classes = SHASH_INITIALIZER(&netdev_classes);
/* All created network devices. */
static struct shash netdev_dev_shash = SHASH_INITIALIZER(&netdev_dev_shash);
/* All open network devices. */
static struct list netdev_list = LIST_INITIALIZER(&netdev_list);
/* This is set pretty low because we probably won't learn anything from the
* additional log messages. */
static struct vlog_rate_limit rl = VLOG_RATE_LIMIT_INIT(5, 20);
static void close_all_netdevs(void *aux OVS_UNUSED);
static int restore_flags(struct netdev *netdev);
void update_device_args(struct netdev_dev *, const struct shash *args);
static void
netdev_initialize(void)
{
static bool inited;
if (!inited) {
inited = true;
fatal_signal_add_hook(close_all_netdevs, NULL, NULL, true);
#ifdef HAVE_NETLINK
netdev_register_provider(&netdev_linux_class);
netdev_register_provider(&netdev_internal_class);
netdev_register_provider(&netdev_tap_class);
netdev_vport_register();
#endif
}
}
/* Performs periodic work needed by all the various kinds of netdevs.
*
* If your program opens any netdevs, it must call this function within its
* main poll loop. */
void
netdev_run(void)
{
struct shash_node *node;
SHASH_FOR_EACH(node, &netdev_classes) {
const struct netdev_class *netdev_class = node->data;
if (netdev_class->run) {
netdev_class->run();
}
}
}
/* Arranges for poll_block() to wake up when netdev_run() needs to be called.
*
* If your program opens any netdevs, it must call this function within its
* main poll loop. */
void
netdev_wait(void)
{
struct shash_node *node;
SHASH_FOR_EACH(node, &netdev_classes) {
const struct netdev_class *netdev_class = node->data;
if (netdev_class->wait) {
netdev_class->wait();
}
}
}
/* Initializes and registers a new netdev provider. After successful
* registration, new netdevs of that type can be opened using netdev_open(). */
int
netdev_register_provider(const struct netdev_class *new_class)
{
if (shash_find(&netdev_classes, new_class->type)) {
VLOG_WARN("attempted to register duplicate netdev provider: %s",
new_class->type);
return EEXIST;
}
if (new_class->init) {
int error = new_class->init();
if (error) {
VLOG_ERR("failed to initialize %s network device class: %s",
new_class->type, strerror(error));
return error;
}
}
shash_add(&netdev_classes, new_class->type, new_class);
return 0;
}
/* Unregisters a netdev provider. 'type' must have been previously
* registered and not currently be in use by any netdevs. After unregistration
* new netdevs of that type cannot be opened using netdev_open(). */
int
netdev_unregister_provider(const char *type)
{
struct shash_node *del_node, *netdev_dev_node;
del_node = shash_find(&netdev_classes, type);
if (!del_node) {
VLOG_WARN("attempted to unregister a netdev provider that is not "
"registered: %s", type);
return EAFNOSUPPORT;
}
SHASH_FOR_EACH(netdev_dev_node, &netdev_dev_shash) {
struct netdev_dev *netdev_dev = netdev_dev_node->data;
if (!strcmp(netdev_dev->netdev_class->type, type)) {
VLOG_WARN("attempted to unregister in use netdev provider: %s",
type);
return EBUSY;
}
}
shash_delete(&netdev_classes, del_node);
return 0;
}
const struct netdev_class *
netdev_lookup_provider(const char *type)
{
netdev_initialize();
return shash_find_data(&netdev_classes, type && type[0] ? type : "system");
}
/* Clears 'types' and enumerates the types of all currently registered netdev
* providers into it. The caller must first initialize the sset. */
void
netdev_enumerate_types(struct sset *types)
{
struct shash_node *node;
netdev_initialize();
sset_clear(types);
SHASH_FOR_EACH(node, &netdev_classes) {
const struct netdev_class *netdev_class = node->data;
sset_add(types, netdev_class->type);
}
}
/* Opens the network device named 'name' (e.g. "eth0") of the specified 'type'
* (e.g. "system") and returns zero if successful, otherwise a positive errno
* value. On success, sets '*netdevp' to the new network device, otherwise to
* null.
*
netdev: Decouple creating and configuring network devices. Until now, each call to netdev_open() for a particular network device had to either specify a set of network device arguments that was either empty or (for devices that already existed) equal to the existing device's configuration. Unfortunately, the definition of "equality" in the latter case was mostly done in terms of strict equality of string-to-string maps, which caused problems in cases where, for example, one set of arguments specified the default value of an optional argument explicitly and the other omitted it. The netdev interface does have provisions for defining equality other ways, but this had only been done in one case that was especially problematic in practice. One way to solve this particular problem would be to carefully define equality in all the problematic cases. This commit takes another approach based on the realization that there is really no need to do any comparisons. Instead, it removes configuration at netdev_open() time entirely, because almost all of netdev_open()'s callers are not interested in creating and configuring a netdev. Most of them just want to open a configured device and use it. Therefore, this commit stops providing any configuration arguments to netdev_open() and the provider functions that it calls. Instead, a caller that does want to configure a device does so after it opens it, by calling netdev_set_config(). This change allows us to simplify the netdev interface a bit. There is no longer any need to implement argument comparisons. As a result, there is also no need for "struct netdev_dev" to keep track of configuration at all. Instead, the network devices that have configuration keep track of it in their own internal form. This new interface does mean that it becomes possible to accidentally create and try to use an unconfigured netdev that requires configuration. Bug #6677. Reported-by: Paul Ingram <paul@nicira.com>
2011-08-08 12:49:17 -07:00
* Some network devices may need to be configured (with netdev_set_config())
* before they can be used. */
int
netdev_open(const char *name, const char *type, struct netdev **netdevp)
{
struct netdev_dev *netdev_dev;
int error;
*netdevp = NULL;
netdev_initialize();
netdev_dev = shash_find_data(&netdev_dev_shash, name);
if (!netdev_dev) {
const struct netdev_class *class;
class = netdev_lookup_provider(type);
if (!class) {
VLOG_WARN("could not create netdev %s of unknown type %s",
name, type);
return EAFNOSUPPORT;
}
error = class->create(class, name, &netdev_dev);
if (error) {
return error;
}
assert(netdev_dev->netdev_class == class);
}
error = netdev_dev->netdev_class->open(netdev_dev, netdevp);
if (!error) {
netdev_dev->ref_cnt++;
} else {
if (!netdev_dev->ref_cnt) {
netdev_dev_uninit(netdev_dev, true);
}
}
return error;
}
/* Reconfigures the device 'netdev' with 'args'. 'args' may be empty
* or NULL if none are needed. */
int
netdev_set_config(struct netdev *netdev, const struct shash *args)
{
struct netdev_dev *netdev_dev = netdev_get_dev(netdev);
if (netdev_dev->netdev_class->set_config) {
netdev: Decouple creating and configuring network devices. Until now, each call to netdev_open() for a particular network device had to either specify a set of network device arguments that was either empty or (for devices that already existed) equal to the existing device's configuration. Unfortunately, the definition of "equality" in the latter case was mostly done in terms of strict equality of string-to-string maps, which caused problems in cases where, for example, one set of arguments specified the default value of an optional argument explicitly and the other omitted it. The netdev interface does have provisions for defining equality other ways, but this had only been done in one case that was especially problematic in practice. One way to solve this particular problem would be to carefully define equality in all the problematic cases. This commit takes another approach based on the realization that there is really no need to do any comparisons. Instead, it removes configuration at netdev_open() time entirely, because almost all of netdev_open()'s callers are not interested in creating and configuring a netdev. Most of them just want to open a configured device and use it. Therefore, this commit stops providing any configuration arguments to netdev_open() and the provider functions that it calls. Instead, a caller that does want to configure a device does so after it opens it, by calling netdev_set_config(). This change allows us to simplify the netdev interface a bit. There is no longer any need to implement argument comparisons. As a result, there is also no need for "struct netdev_dev" to keep track of configuration at all. Instead, the network devices that have configuration keep track of it in their own internal form. This new interface does mean that it becomes possible to accidentally create and try to use an unconfigured netdev that requires configuration. Bug #6677. Reported-by: Paul Ingram <paul@nicira.com>
2011-08-08 12:49:17 -07:00
struct shash no_args = SHASH_INITIALIZER(&no_args);
return netdev_dev->netdev_class->set_config(netdev_dev,
args ? args : &no_args);
} else if (args && !shash_is_empty(args)) {
VLOG_WARN("%s: arguments provided to device that is not configurable",
netdev_get_name(netdev));
}
return 0;
}
netdev: Decouple creating and configuring network devices. Until now, each call to netdev_open() for a particular network device had to either specify a set of network device arguments that was either empty or (for devices that already existed) equal to the existing device's configuration. Unfortunately, the definition of "equality" in the latter case was mostly done in terms of strict equality of string-to-string maps, which caused problems in cases where, for example, one set of arguments specified the default value of an optional argument explicitly and the other omitted it. The netdev interface does have provisions for defining equality other ways, but this had only been done in one case that was especially problematic in practice. One way to solve this particular problem would be to carefully define equality in all the problematic cases. This commit takes another approach based on the realization that there is really no need to do any comparisons. Instead, it removes configuration at netdev_open() time entirely, because almost all of netdev_open()'s callers are not interested in creating and configuring a netdev. Most of them just want to open a configured device and use it. Therefore, this commit stops providing any configuration arguments to netdev_open() and the provider functions that it calls. Instead, a caller that does want to configure a device does so after it opens it, by calling netdev_set_config(). This change allows us to simplify the netdev interface a bit. There is no longer any need to implement argument comparisons. As a result, there is also no need for "struct netdev_dev" to keep track of configuration at all. Instead, the network devices that have configuration keep track of it in their own internal form. This new interface does mean that it becomes possible to accidentally create and try to use an unconfigured netdev that requires configuration. Bug #6677. Reported-by: Paul Ingram <paul@nicira.com>
2011-08-08 12:49:17 -07:00
/* Returns the current configuration for 'netdev' in 'args'. The caller must
* have already initialized 'args' with shash_init(). Returns 0 on success, in
* which case 'args' will be filled with 'netdev''s configuration. On failure
* returns a positive errno value, in which case 'args' will be empty.
*
netdev: Decouple creating and configuring network devices. Until now, each call to netdev_open() for a particular network device had to either specify a set of network device arguments that was either empty or (for devices that already existed) equal to the existing device's configuration. Unfortunately, the definition of "equality" in the latter case was mostly done in terms of strict equality of string-to-string maps, which caused problems in cases where, for example, one set of arguments specified the default value of an optional argument explicitly and the other omitted it. The netdev interface does have provisions for defining equality other ways, but this had only been done in one case that was especially problematic in practice. One way to solve this particular problem would be to carefully define equality in all the problematic cases. This commit takes another approach based on the realization that there is really no need to do any comparisons. Instead, it removes configuration at netdev_open() time entirely, because almost all of netdev_open()'s callers are not interested in creating and configuring a netdev. Most of them just want to open a configured device and use it. Therefore, this commit stops providing any configuration arguments to netdev_open() and the provider functions that it calls. Instead, a caller that does want to configure a device does so after it opens it, by calling netdev_set_config(). This change allows us to simplify the netdev interface a bit. There is no longer any need to implement argument comparisons. As a result, there is also no need for "struct netdev_dev" to keep track of configuration at all. Instead, the network devices that have configuration keep track of it in their own internal form. This new interface does mean that it becomes possible to accidentally create and try to use an unconfigured netdev that requires configuration. Bug #6677. Reported-by: Paul Ingram <paul@nicira.com>
2011-08-08 12:49:17 -07:00
* The caller owns 'args' and its contents and must eventually free them with
* shash_destroy_free_data(). */
int
netdev_get_config(const struct netdev *netdev, struct shash *args)
{
netdev: Decouple creating and configuring network devices. Until now, each call to netdev_open() for a particular network device had to either specify a set of network device arguments that was either empty or (for devices that already existed) equal to the existing device's configuration. Unfortunately, the definition of "equality" in the latter case was mostly done in terms of strict equality of string-to-string maps, which caused problems in cases where, for example, one set of arguments specified the default value of an optional argument explicitly and the other omitted it. The netdev interface does have provisions for defining equality other ways, but this had only been done in one case that was especially problematic in practice. One way to solve this particular problem would be to carefully define equality in all the problematic cases. This commit takes another approach based on the realization that there is really no need to do any comparisons. Instead, it removes configuration at netdev_open() time entirely, because almost all of netdev_open()'s callers are not interested in creating and configuring a netdev. Most of them just want to open a configured device and use it. Therefore, this commit stops providing any configuration arguments to netdev_open() and the provider functions that it calls. Instead, a caller that does want to configure a device does so after it opens it, by calling netdev_set_config(). This change allows us to simplify the netdev interface a bit. There is no longer any need to implement argument comparisons. As a result, there is also no need for "struct netdev_dev" to keep track of configuration at all. Instead, the network devices that have configuration keep track of it in their own internal form. This new interface does mean that it becomes possible to accidentally create and try to use an unconfigured netdev that requires configuration. Bug #6677. Reported-by: Paul Ingram <paul@nicira.com>
2011-08-08 12:49:17 -07:00
struct netdev_dev *netdev_dev = netdev_get_dev(netdev);
int error;
shash_clear_free_data(args);
if (netdev_dev->netdev_class->get_config) {
error = netdev_dev->netdev_class->get_config(netdev_dev, args);
if (error) {
shash_clear_free_data(args);
}
} else {
error = 0;
}
return error;
}
/* Closes and destroys 'netdev'. */
void
netdev_close(struct netdev *netdev)
{
if (netdev) {
struct netdev_dev *netdev_dev = netdev_get_dev(netdev);
assert(netdev_dev->ref_cnt);
netdev_dev->ref_cnt--;
netdev_uninit(netdev, true);
/* If the reference count for the netdev device is zero, destroy it. */
if (!netdev_dev->ref_cnt) {
netdev_dev_uninit(netdev_dev, true);
}
}
}
/* Returns true if a network device named 'name' exists and may be opened,
* otherwise false. */
bool
netdev_exists(const char *name)
{
struct netdev *netdev;
int error;
error = netdev_open(name, "system", &netdev);
if (!error) {
netdev_close(netdev);
return true;
} else {
if (error != ENODEV) {
VLOG_WARN("failed to open network device %s: %s",
name, strerror(error));
}
return false;
}
}
/* Returns true if a network device named 'name' is currently opened,
* otherwise false. */
bool
netdev_is_open(const char *name)
{
return !!shash_find_data(&netdev_dev_shash, name);
}
/* Parses 'netdev_name_', which is of the form [type@]name into its component
* pieces. 'name' and 'type' must be freed by the caller. */
void
netdev_parse_name(const char *netdev_name_, char **name, char **type)
{
char *netdev_name = xstrdup(netdev_name_);
char *separator;
separator = strchr(netdev_name, '@');
if (separator) {
*separator = '\0';
*type = netdev_name;
*name = xstrdup(separator + 1);
} else {
*name = netdev_name;
*type = xstrdup("system");
}
}
/* Attempts to set up 'netdev' for receiving packets with netdev_recv().
* Returns 0 if successful, otherwise a positive errno value. EOPNOTSUPP
* indicates that the network device does not implement packet reception
* through this interface. */
int
netdev_listen(struct netdev *netdev)
{
int (*listen)(struct netdev *);
listen = netdev_get_dev(netdev)->netdev_class->listen;
return listen ? (listen)(netdev) : EOPNOTSUPP;
}
/* Attempts to receive a packet from 'netdev' into 'buffer', which the caller
* must have initialized with sufficient room for the packet. The space
* required to receive any packet is ETH_HEADER_LEN bytes, plus VLAN_HEADER_LEN
* bytes, plus the device's MTU (which may be retrieved via netdev_get_mtu()).
* (Some devices do not allow for a VLAN header, in which case VLAN_HEADER_LEN
* need not be included.)
*
* This function can only be expected to return a packet if ->listen() has
* been called successfully.
*
* If a packet is successfully retrieved, returns 0. In this case 'buffer' is
* guaranteed to contain at least ETH_TOTAL_MIN bytes. Otherwise, returns a
* positive errno value. Returns EAGAIN immediately if no packet is ready to
* be returned.
*
* Some network devices may not implement support for this function. In such
* cases this function will always return EOPNOTSUPP. */
int
netdev_recv(struct netdev *netdev, struct ofpbuf *buffer)
{
int (*recv)(struct netdev *, void *, size_t);
int retval;
assert(buffer->size == 0);
assert(ofpbuf_tailroom(buffer) >= ETH_TOTAL_MIN);
recv = netdev_get_dev(netdev)->netdev_class->recv;
retval = (recv
? (recv)(netdev, buffer->data, ofpbuf_tailroom(buffer))
: -EOPNOTSUPP);
if (retval >= 0) {
COVERAGE_INC(netdev_received);
buffer->size += retval;
if (buffer->size < ETH_TOTAL_MIN) {
ofpbuf_put_zeros(buffer, ETH_TOTAL_MIN - buffer->size);
}
return 0;
} else {
return -retval;
}
}
/* Registers with the poll loop to wake up from the next call to poll_block()
* when a packet is ready to be received with netdev_recv() on 'netdev'. */
void
netdev_recv_wait(struct netdev *netdev)
{
void (*recv_wait)(struct netdev *);
recv_wait = netdev_get_dev(netdev)->netdev_class->recv_wait;
if (recv_wait) {
recv_wait(netdev);
}
}
/* Discards all packets waiting to be received from 'netdev'. */
int
netdev_drain(struct netdev *netdev)
{
int (*drain)(struct netdev *);
drain = netdev_get_dev(netdev)->netdev_class->drain;
return drain ? drain(netdev) : 0;
}
/* Sends 'buffer' on 'netdev'. Returns 0 if successful, otherwise a positive
* errno value. Returns EAGAIN without blocking if the packet cannot be queued
* immediately. Returns EMSGSIZE if a partial packet was transmitted or if
* the packet is too big or too small to transmit on the device.
*
* The caller retains ownership of 'buffer' in all cases.
*
* The kernel maintains a packet transmission queue, so the caller is not
* expected to do additional queuing of packets.
*
* Some network devices may not implement support for this function. In such
* cases this function will always return EOPNOTSUPP. */
int
netdev_send(struct netdev *netdev, const struct ofpbuf *buffer)
{
int (*send)(struct netdev *, const void *, size_t);
int error;
send = netdev_get_dev(netdev)->netdev_class->send;
error = send ? (send)(netdev, buffer->data, buffer->size) : EOPNOTSUPP;
if (!error) {
COVERAGE_INC(netdev_sent);
}
return error;
}
/* Registers with the poll loop to wake up from the next call to poll_block()
* when the packet transmission queue has sufficient room to transmit a packet
* with netdev_send().
*
* The kernel maintains a packet transmission queue, so the client is not
* expected to do additional queuing of packets. Thus, this function is
* unlikely to ever be used. It is included for completeness. */
void
netdev_send_wait(struct netdev *netdev)
{
void (*send_wait)(struct netdev *);
send_wait = netdev_get_dev(netdev)->netdev_class->send_wait;
if (send_wait) {
send_wait(netdev);
}
}
/* Attempts to set 'netdev''s MAC address to 'mac'. Returns 0 if successful,
* otherwise a positive errno value. */
int
netdev_set_etheraddr(struct netdev *netdev, const uint8_t mac[ETH_ADDR_LEN])
{
return netdev_get_dev(netdev)->netdev_class->set_etheraddr(netdev, mac);
}
/* Retrieves 'netdev''s MAC address. If successful, returns 0 and copies the
* the MAC address into 'mac'. On failure, returns a positive errno value and
* clears 'mac' to all-zeros. */
int
netdev_get_etheraddr(const struct netdev *netdev, uint8_t mac[ETH_ADDR_LEN])
{
return netdev_get_dev(netdev)->netdev_class->get_etheraddr(netdev, mac);
}
/* Returns the name of the network device that 'netdev' represents,
* e.g. "eth0". The caller must not modify or free the returned string. */
const char *
netdev_get_name(const struct netdev *netdev)
{
return netdev_get_dev(netdev)->name;
}
/* Retrieves the MTU of 'netdev'. The MTU is the maximum size of transmitted
* (and received) packets, in bytes, not including the hardware header; thus,
* this is typically 1500 bytes for Ethernet devices.
*
* If successful, returns 0 and stores the MTU size in '*mtup'. Returns
* EOPNOTSUPP if 'netdev' does not have an MTU (as e.g. some tunnels do not).
* On other failure, returns a positive errno value. On failure, sets '*mtup'
* to 0. */
int
netdev_get_mtu(const struct netdev *netdev, int *mtup)
{
const struct netdev_class *class = netdev_get_dev(netdev)->netdev_class;
int error;
error = class->get_mtu ? class->get_mtu(netdev, mtup) : EOPNOTSUPP;
if (error) {
*mtup = 0;
if (error != EOPNOTSUPP) {
VLOG_WARN_RL(&rl, "failed to retrieve MTU for network device %s: "
"%s", netdev_get_name(netdev), strerror(error));
}
}
return error;
}
/* Sets the MTU of 'netdev'. The MTU is the maximum size of transmitted
* (and received) packets, in bytes.
*
* If successful, returns 0. Returns EOPNOTSUPP if 'netdev' does not have an
* MTU (as e.g. some tunnels do not). On other failure, returns a positive
* errno value. */
int
netdev_set_mtu(const struct netdev *netdev, int mtu)
{
const struct netdev_class *class = netdev_get_dev(netdev)->netdev_class;
int error;
error = class->set_mtu ? class->set_mtu(netdev, mtu) : EOPNOTSUPP;
if (error && error != EOPNOTSUPP) {
VLOG_WARN_RL(&rl, "failed to retrieve MTU for network device %s: %s",
netdev_get_name(netdev), strerror(error));
}
return error;
}
/* Returns the ifindex of 'netdev', if successful, as a positive number. On
* failure, returns a negative errno value.
*
* The desired semantics of the ifindex value are a combination of those
* specified by POSIX for if_nametoindex() and by SNMP for ifIndex. An ifindex
* value should be unique within a host and remain stable at least until
* reboot. SNMP says an ifindex "ranges between 1 and the value of ifNumber"
* but many systems do not follow this rule anyhow.
*
* Some network devices may not implement support for this function. In such
* cases this function will always return -EOPNOTSUPP.
*/
int
netdev_get_ifindex(const struct netdev *netdev)
{
int (*get_ifindex)(const struct netdev *);
get_ifindex = netdev_get_dev(netdev)->netdev_class->get_ifindex;
return get_ifindex ? get_ifindex(netdev) : -EOPNOTSUPP;
}
/* Stores the features supported by 'netdev' into each of '*current',
* '*advertised', '*supported', and '*peer' that are non-null. Each value is a
* bitmap of "enum ofp_port_features" bits, in host byte order. Returns 0 if
* successful, otherwise a positive errno value. On failure, all of the
* passed-in values are set to 0.
*
* Some network devices may not implement support for this function. In such
* cases this function will always return EOPNOTSUPP. */
int
netdev_get_features(const struct netdev *netdev,
uint32_t *current, uint32_t *advertised,
uint32_t *supported, uint32_t *peer)
{
int (*get_features)(const struct netdev *netdev,
uint32_t *current, uint32_t *advertised,
uint32_t *supported, uint32_t *peer);
uint32_t dummy[4];
int error;
if (!current) {
current = &dummy[0];
}
if (!advertised) {
advertised = &dummy[1];
}
if (!supported) {
supported = &dummy[2];
}
if (!peer) {
peer = &dummy[3];
}
get_features = netdev_get_dev(netdev)->netdev_class->get_features;
error = get_features
? get_features(netdev, current, advertised, supported, peer)
: EOPNOTSUPP;
if (error) {
*current = *advertised = *supported = *peer = 0;
}
return error;
}
/* Returns the maximum speed of a network connection that has the "enum
* ofp_port_features" bits in 'features', in bits per second. If no bits that
* indicate a speed are set in 'features', assumes 100Mbps. */
uint64_t
netdev_features_to_bps(uint32_t features)
{
enum {
F_10000MB = OFPPF_10GB_FD,
F_1000MB = OFPPF_1GB_HD | OFPPF_1GB_FD,
F_100MB = OFPPF_100MB_HD | OFPPF_100MB_FD,
F_10MB = OFPPF_10MB_HD | OFPPF_10MB_FD
};
return ( features & F_10000MB ? UINT64_C(10000000000)
: features & F_1000MB ? UINT64_C(1000000000)
: features & F_100MB ? UINT64_C(100000000)
: features & F_10MB ? UINT64_C(10000000)
: UINT64_C(100000000));
}
/* Returns true if any of the "enum ofp_port_features" bits that indicate a
* full-duplex link are set in 'features', otherwise false. */
bool
netdev_features_is_full_duplex(uint32_t features)
{
return (features & (OFPPF_10MB_FD | OFPPF_100MB_FD | OFPPF_1GB_FD
| OFPPF_10GB_FD)) != 0;
}
/* Set the features advertised by 'netdev' to 'advertise'. Returns 0 if
* successful, otherwise a positive errno value. */
int
netdev_set_advertisements(struct netdev *netdev, uint32_t advertise)
{
return (netdev_get_dev(netdev)->netdev_class->set_advertisements
? netdev_get_dev(netdev)->netdev_class->set_advertisements(
netdev, advertise)
: EOPNOTSUPP);
}
2009-09-02 10:14:53 -07:00
/* If 'netdev' has an assigned IPv4 address, sets '*address' to that address
* and '*netmask' to its netmask and returns 0. Otherwise, returns a positive
* errno value and sets '*address' to 0 (INADDR_ANY).
*
* The following error values have well-defined meanings:
*
* - EADDRNOTAVAIL: 'netdev' has no assigned IPv4 address.
*
* - EOPNOTSUPP: No IPv4 network stack attached to 'netdev'.
*
2011-08-04 16:50:25 -07:00
* 'address' or 'netmask' or both may be null, in which case the address or
* netmask is not reported. */
int
2009-09-02 10:14:53 -07:00
netdev_get_in4(const struct netdev *netdev,
struct in_addr *address_, struct in_addr *netmask_)
{
2009-09-02 10:14:53 -07:00
struct in_addr address;
struct in_addr netmask;
int error;
error = (netdev_get_dev(netdev)->netdev_class->get_in4
? netdev_get_dev(netdev)->netdev_class->get_in4(netdev,
&address, &netmask)
: EOPNOTSUPP);
2009-09-02 10:14:53 -07:00
if (address_) {
address_->s_addr = error ? 0 : address.s_addr;
}
if (netmask_) {
netmask_->s_addr = error ? 0 : netmask.s_addr;
}
return error;
}
/* Assigns 'addr' as 'netdev''s IPv4 address and 'mask' as its netmask. If
* 'addr' is INADDR_ANY, 'netdev''s IPv4 address is cleared. Returns a
* positive errno value. */
int
netdev_set_in4(struct netdev *netdev, struct in_addr addr, struct in_addr mask)
{
return (netdev_get_dev(netdev)->netdev_class->set_in4
? netdev_get_dev(netdev)->netdev_class->set_in4(netdev, addr, mask)
: EOPNOTSUPP);
}
/* Adds 'router' as a default IP gateway for the TCP/IP stack that corresponds
* to 'netdev'. */
int
netdev_add_router(struct netdev *netdev, struct in_addr router)
{
COVERAGE_INC(netdev_add_router);
return (netdev_get_dev(netdev)->netdev_class->add_router
? netdev_get_dev(netdev)->netdev_class->add_router(netdev, router)
: EOPNOTSUPP);
}
2009-09-02 10:14:53 -07:00
/* Looks up the next hop for 'host' for the TCP/IP stack that corresponds to
* 'netdev'. If a route cannot not be determined, sets '*next_hop' to 0,
* '*netdev_name' to null, and returns a positive errno value. Otherwise, if a
* next hop is found, stores the next hop gateway's address (0 if 'host' is on
* a directly connected network) in '*next_hop' and a copy of the name of the
* device to reach 'host' in '*netdev_name', and returns 0. The caller is
* responsible for freeing '*netdev_name' (by calling free()). */
int
netdev_get_next_hop(const struct netdev *netdev,
const struct in_addr *host, struct in_addr *next_hop,
char **netdev_name)
{
int error = (netdev_get_dev(netdev)->netdev_class->get_next_hop
? netdev_get_dev(netdev)->netdev_class->get_next_hop(
host, next_hop, netdev_name)
2009-09-02 10:14:53 -07:00
: EOPNOTSUPP);
if (error) {
2009-09-02 10:14:53 -07:00
next_hop->s_addr = 0;
*netdev_name = NULL;
}
return error;
}
/* Populates 'sh' with status information.
*
* Populates 'sh' with 'netdev' specific status information. This information
* may be used to populate the status column of the Interface table as defined
* in ovs-vswitchd.conf.db(5). */
int
netdev_get_status(const struct netdev *netdev, struct shash *sh)
{
struct netdev_dev *dev = netdev_get_dev(netdev);
return (dev->netdev_class->get_status
? dev->netdev_class->get_status(netdev, sh)
: EOPNOTSUPP);
}
/* If 'netdev' has an assigned IPv6 address, sets '*in6' to that address and
* returns 0. Otherwise, returns a positive errno value and sets '*in6' to
* all-zero-bits (in6addr_any).
*
* The following error values have well-defined meanings:
*
* - EADDRNOTAVAIL: 'netdev' has no assigned IPv6 address.
*
* - EOPNOTSUPP: No IPv6 network stack attached to 'netdev'.
*
* 'in6' may be null, in which case the address itself is not reported. */
int
netdev_get_in6(const struct netdev *netdev, struct in6_addr *in6)
{
struct in6_addr dummy;
int error;
error = (netdev_get_dev(netdev)->netdev_class->get_in6
? netdev_get_dev(netdev)->netdev_class->get_in6(netdev,
in6 ? in6 : &dummy)
: EOPNOTSUPP);
if (error && in6) {
memset(in6, 0, sizeof *in6);
}
return error;
}
/* On 'netdev', turns off the flags in 'off' and then turns on the flags in
* 'on'. If 'permanent' is true, the changes will persist; otherwise, they
* will be reverted when 'netdev' is closed or the program exits. Returns 0 if
* successful, otherwise a positive errno value. */
static int
do_update_flags(struct netdev *netdev, enum netdev_flags off,
enum netdev_flags on, enum netdev_flags *old_flagsp,
bool permanent)
{
enum netdev_flags old_flags;
int error;
error = netdev_get_dev(netdev)->netdev_class->update_flags(netdev,
off & ~on, on, &old_flags);
if (error) {
VLOG_WARN_RL(&rl, "failed to %s flags for network device %s: %s",
off || on ? "set" : "get", netdev_get_name(netdev),
strerror(error));
old_flags = 0;
} else if ((off || on) && !permanent) {
enum netdev_flags new_flags = (old_flags & ~off) | on;
enum netdev_flags changed_flags = old_flags ^ new_flags;
if (changed_flags) {
if (!netdev->changed_flags) {
netdev->save_flags = old_flags;
}
netdev->changed_flags |= changed_flags;
}
}
if (old_flagsp) {
*old_flagsp = old_flags;
}
return error;
}
/* Obtains the current flags for 'netdev' and stores them into '*flagsp'.
* Returns 0 if successful, otherwise a positive errno value. On failure,
* stores 0 into '*flagsp'. */
int
netdev_get_flags(const struct netdev *netdev_, enum netdev_flags *flagsp)
{
struct netdev *netdev = (struct netdev *) netdev_;
return do_update_flags(netdev, 0, 0, flagsp, false);
}
/* Sets the flags for 'netdev' to 'flags'.
* If 'permanent' is true, the changes will persist; otherwise, they
* will be reverted when 'netdev' is closed or the program exits.
* Returns 0 if successful, otherwise a positive errno value. */
int
netdev_set_flags(struct netdev *netdev, enum netdev_flags flags,
bool permanent)
{
return do_update_flags(netdev, -1, flags, NULL, permanent);
}
/* Turns on the specified 'flags' on 'netdev'.
* If 'permanent' is true, the changes will persist; otherwise, they
* will be reverted when 'netdev' is closed or the program exits.
* Returns 0 if successful, otherwise a positive errno value. */
int
netdev_turn_flags_on(struct netdev *netdev, enum netdev_flags flags,
bool permanent)
{
return do_update_flags(netdev, 0, flags, NULL, permanent);
}
/* Turns off the specified 'flags' on 'netdev'.
* If 'permanent' is true, the changes will persist; otherwise, they
* will be reverted when 'netdev' is closed or the program exits.
* Returns 0 if successful, otherwise a positive errno value. */
int
netdev_turn_flags_off(struct netdev *netdev, enum netdev_flags flags,
bool permanent)
{
return do_update_flags(netdev, flags, 0, NULL, permanent);
}
/* Looks up the ARP table entry for 'ip' on 'netdev'. If one exists and can be
* successfully retrieved, it stores the corresponding MAC address in 'mac' and
* returns 0. Otherwise, it returns a positive errno value; in particular,
* ENXIO indicates that there is no ARP table entry for 'ip' on 'netdev'. */
int
netdev_arp_lookup(const struct netdev *netdev,
ovs_be32 ip, uint8_t mac[ETH_ADDR_LEN])
{
int error = (netdev_get_dev(netdev)->netdev_class->arp_lookup
? netdev_get_dev(netdev)->netdev_class->arp_lookup(netdev,
ip, mac)
: EOPNOTSUPP);
if (error) {
memset(mac, 0, ETH_ADDR_LEN);
}
return error;
}
/* Returns true if carrier is active (link light is on) on 'netdev'. */
bool
netdev_get_carrier(const struct netdev *netdev)
{
int error;
enum netdev_flags flags;
bool carrier;
netdev_get_flags(netdev, &flags);
if (!(flags & NETDEV_UP)) {
return false;
}
if (!netdev_get_dev(netdev)->netdev_class->get_carrier) {
return true;
}
error = netdev_get_dev(netdev)->netdev_class->get_carrier(netdev,
&carrier);
if (error) {
VLOG_DBG("%s: failed to get network device carrier status, assuming "
"down: %s", netdev_get_name(netdev), strerror(error));
carrier = false;
}
return carrier;
}
/* Attempts to force netdev_get_carrier() to poll 'netdev''s MII registers for
* link status instead of checking 'netdev''s carrier. 'netdev''s MII
* registers will be polled once ever 'interval' milliseconds. If 'netdev'
* does not support MII, another method may be used as a fallback. If
* 'interval' is less than or equal to zero, reverts netdev_get_carrier() to
* its normal behavior.
*
* Returns 0 if successful, otherwise a positive errno value. */
int
netdev_set_miimon_interval(struct netdev *netdev, long long int interval)
{
struct netdev_dev *netdev_dev = netdev_get_dev(netdev);
return (netdev_dev->netdev_class->set_miimon_interval
? netdev_dev->netdev_class->set_miimon_interval(netdev, interval)
: EOPNOTSUPP);
}
/* Retrieves current device stats for 'netdev'. */
int
netdev_get_stats(const struct netdev *netdev, struct netdev_stats *stats)
{
int error;
COVERAGE_INC(netdev_get_stats);
error = (netdev_get_dev(netdev)->netdev_class->get_stats
? netdev_get_dev(netdev)->netdev_class->get_stats(netdev, stats)
: EOPNOTSUPP);
if (error) {
memset(stats, 0xff, sizeof *stats);
}
return error;
}
/* Attempts to change the stats for 'netdev' to those provided in 'stats'.
* Returns 0 if successful, otherwise a positive errno value.
*
* This will probably fail for most network devices. Some devices might only
* allow setting their stats to 0. */
int
netdev_set_stats(struct netdev *netdev, const struct netdev_stats *stats)
{
return (netdev_get_dev(netdev)->netdev_class->set_stats
? netdev_get_dev(netdev)->netdev_class->set_stats(netdev, stats)
: EOPNOTSUPP);
}
/* Attempts to set input rate limiting (policing) policy, such that up to
* 'kbits_rate' kbps of traffic is accepted, with a maximum accumulative burst
* size of 'kbits' kb. */
int
netdev_set_policing(struct netdev *netdev, uint32_t kbits_rate,
uint32_t kbits_burst)
{
return (netdev_get_dev(netdev)->netdev_class->set_policing
? netdev_get_dev(netdev)->netdev_class->set_policing(netdev,
kbits_rate, kbits_burst)
: EOPNOTSUPP);
}
/* Adds to 'types' all of the forms of QoS supported by 'netdev', or leaves it
* empty if 'netdev' does not support QoS. Any names added to 'types' should
* be documented as valid for the "type" column in the "QoS" table in
* vswitchd/vswitch.xml (which is built as ovs-vswitchd.conf.db(8)).
*
* Every network device supports disabling QoS with a type of "", but this type
* will not be added to 'types'.
*
* The caller must initialize 'types' (e.g. with sset_init()) before calling
* this function. The caller is responsible for destroying 'types' (e.g. with
* sset_destroy()) when it is no longer needed.
*
* Returns 0 if successful, otherwise a positive errno value. */
int
netdev_get_qos_types(const struct netdev *netdev, struct sset *types)
{
const struct netdev_class *class = netdev_get_dev(netdev)->netdev_class;
return (class->get_qos_types
? class->get_qos_types(netdev, types)
: 0);
}
/* Queries 'netdev' for its capabilities regarding the specified 'type' of QoS,
* which should be "" or one of the types returned by netdev_get_qos_types()
* for 'netdev'. Returns 0 if successful, otherwise a positive errno value.
* On success, initializes 'caps' with the QoS capabilities; on failure, clears
* 'caps' to all zeros. */
int
netdev_get_qos_capabilities(const struct netdev *netdev, const char *type,
struct netdev_qos_capabilities *caps)
{
const struct netdev_class *class = netdev_get_dev(netdev)->netdev_class;
if (*type) {
int retval = (class->get_qos_capabilities
? class->get_qos_capabilities(netdev, type, caps)
: EOPNOTSUPP);
if (retval) {
memset(caps, 0, sizeof *caps);
}
return retval;
} else {
/* Every netdev supports turning off QoS. */
memset(caps, 0, sizeof *caps);
return 0;
}
}
/* Obtains the number of queues supported by 'netdev' for the specified 'type'
* of QoS. Returns 0 if successful, otherwise a positive errno value. Stores
* the number of queues (zero on failure) in '*n_queuesp'.
*
* This is just a simple wrapper around netdev_get_qos_capabilities(). */
int
netdev_get_n_queues(const struct netdev *netdev,
const char *type, unsigned int *n_queuesp)
{
struct netdev_qos_capabilities caps;
int retval;
retval = netdev_get_qos_capabilities(netdev, type, &caps);
*n_queuesp = caps.n_queues;
return retval;
}
/* Queries 'netdev' about its currently configured form of QoS. If successful,
* stores the name of the current form of QoS into '*typep', stores any details
* of configuration as string key-value pairs in 'details', and returns 0. On
* failure, sets '*typep' to NULL and returns a positive errno value.
*
* A '*typep' of "" indicates that QoS is currently disabled on 'netdev'.
*
* The caller must initialize 'details' as an empty shash (e.g. with
* shash_init()) before calling this function. The caller must free 'details',
* including 'data' members, when it is no longer needed (e.g. with
* shash_destroy_free_data()).
*
* The caller must not modify or free '*typep'.
*
* '*typep' will be one of the types returned by netdev_get_qos_types() for
* 'netdev'. The contents of 'details' should be documented as valid for
* '*typep' in the "other_config" column in the "QoS" table in
* vswitchd/vswitch.xml (which is built as ovs-vswitchd.conf.db(8)). */
int
netdev_get_qos(const struct netdev *netdev,
const char **typep, struct shash *details)
{
const struct netdev_class *class = netdev_get_dev(netdev)->netdev_class;
int retval;
if (class->get_qos) {
retval = class->get_qos(netdev, typep, details);
if (retval) {
*typep = NULL;
shash_clear_free_data(details);
}
return retval;
} else {
/* 'netdev' doesn't support QoS, so report that QoS is disabled. */
*typep = "";
return 0;
}
}
/* Attempts to reconfigure QoS on 'netdev', changing the form of QoS to 'type'
* with details of configuration from 'details'. Returns 0 if successful,
* otherwise a positive errno value. On error, the previous QoS configuration
* is retained.
*
* When this function changes the type of QoS (not just 'details'), this also
* resets all queue configuration for 'netdev' to their defaults (which depend
* on the specific type of QoS). Otherwise, the queue configuration for
* 'netdev' is unchanged.
*
* 'type' should be "" (to disable QoS) or one of the types returned by
* netdev_get_qos_types() for 'netdev'. The contents of 'details' should be
* documented as valid for the given 'type' in the "other_config" column in the
* "QoS" table in vswitchd/vswitch.xml (which is built as
* ovs-vswitchd.conf.db(8)).
*
* NULL may be specified for 'details' if there are no configuration
* details. */
int
netdev_set_qos(struct netdev *netdev,
const char *type, const struct shash *details)
{
const struct netdev_class *class = netdev_get_dev(netdev)->netdev_class;
if (!type) {
type = "";
}
if (class->set_qos) {
if (!details) {
static struct shash empty = SHASH_INITIALIZER(&empty);
details = &empty;
}
return class->set_qos(netdev, type, details);
} else {
return *type ? EOPNOTSUPP : 0;
}
}
/* Queries 'netdev' for information about the queue numbered 'queue_id'. If
* successful, adds that information as string key-value pairs to 'details'.
* Returns 0 if successful, otherwise a positive errno value.
*
* 'queue_id' must be less than the number of queues supported by 'netdev' for
* the current form of QoS (e.g. as returned by netdev_get_n_queues(netdev)).
*
* The returned contents of 'details' should be documented as valid for the
* given 'type' in the "other_config" column in the "Queue" table in
* vswitchd/vswitch.xml (which is built as ovs-vswitchd.conf.db(8)).
*
* The caller must initialize 'details' (e.g. with shash_init()) before calling
* this function. The caller must free 'details', including 'data' members,
* when it is no longer needed (e.g. with shash_destroy_free_data()). */
int
netdev_get_queue(const struct netdev *netdev,
unsigned int queue_id, struct shash *details)
{
const struct netdev_class *class = netdev_get_dev(netdev)->netdev_class;
int retval;
retval = (class->get_queue
? class->get_queue(netdev, queue_id, details)
: EOPNOTSUPP);
if (retval) {
shash_clear_free_data(details);
}
return retval;
}
/* Configures the queue numbered 'queue_id' on 'netdev' with the key-value
* string pairs in 'details'. The contents of 'details' should be documented
* as valid for the given 'type' in the "other_config" column in the "Queue"
* table in vswitchd/vswitch.xml (which is built as ovs-vswitchd.conf.db(8)).
* Returns 0 if successful, otherwise a positive errno value. On failure, the
* given queue's configuration should be unmodified.
*
* 'queue_id' must be less than the number of queues supported by 'netdev' for
* the current form of QoS (e.g. as returned by netdev_get_n_queues(netdev)).
*
* This function does not modify 'details', and the caller retains ownership of
* it. */
int
netdev_set_queue(struct netdev *netdev,
unsigned int queue_id, const struct shash *details)
{
const struct netdev_class *class = netdev_get_dev(netdev)->netdev_class;
return (class->set_queue
? class->set_queue(netdev, queue_id, details)
: EOPNOTSUPP);
}
/* Attempts to delete the queue numbered 'queue_id' from 'netdev'. Some kinds
* of QoS may have a fixed set of queues, in which case attempts to delete them
* will fail with EOPNOTSUPP.
*
* Returns 0 if successful, otherwise a positive errno value. On failure, the
* given queue will be unmodified.
*
* 'queue_id' must be less than the number of queues supported by 'netdev' for
* the current form of QoS (e.g. as returned by
* netdev_get_n_queues(netdev)). */
int
netdev_delete_queue(struct netdev *netdev, unsigned int queue_id)
{
const struct netdev_class *class = netdev_get_dev(netdev)->netdev_class;
return (class->delete_queue
? class->delete_queue(netdev, queue_id)
: EOPNOTSUPP);
}
/* Obtains statistics about 'queue_id' on 'netdev'. On success, returns 0 and
* fills 'stats' with the queue's statistics; individual members of 'stats' may
* be set to all-1-bits if the statistic is unavailable. On failure, returns a
* positive errno value and fills 'stats' with all-1-bits. */
int
netdev_get_queue_stats(const struct netdev *netdev, unsigned int queue_id,
struct netdev_queue_stats *stats)
{
const struct netdev_class *class = netdev_get_dev(netdev)->netdev_class;
int retval;
retval = (class->get_queue_stats
? class->get_queue_stats(netdev, queue_id, stats)
: EOPNOTSUPP);
if (retval) {
memset(stats, 0xff, sizeof *stats);
}
return retval;
}
/* Iterates over all of 'netdev''s queues, calling 'cb' with the queue's ID,
* its configuration, and the 'aux' specified by the caller. The order of
* iteration is unspecified, but (when successful) each queue is visited
* exactly once.
*
* Calling this function may be more efficient than calling netdev_get_queue()
* for every queue.
*
* 'cb' must not modify or free the 'details' argument passed in.
*
* Returns 0 if successful, otherwise a positive errno value. On error, some
* configured queues may not have been included in the iteration. */
int
netdev_dump_queues(const struct netdev *netdev,
netdev_dump_queues_cb *cb, void *aux)
{
const struct netdev_class *class = netdev_get_dev(netdev)->netdev_class;
return (class->dump_queues
? class->dump_queues(netdev, cb, aux)
: EOPNOTSUPP);
}
/* Iterates over all of 'netdev''s queues, calling 'cb' with the queue's ID,
* its statistics, and the 'aux' specified by the caller. The order of
* iteration is unspecified, but (when successful) each queue is visited
* exactly once.
*
* Calling this function may be more efficient than calling
* netdev_get_queue_stats() for every queue.
*
* 'cb' must not modify or free the statistics passed in.
*
* Returns 0 if successful, otherwise a positive errno value. On error, some
* configured queues may not have been included in the iteration. */
int
netdev_dump_queue_stats(const struct netdev *netdev,
netdev_dump_queue_stats_cb *cb, void *aux)
{
const struct netdev_class *class = netdev_get_dev(netdev)->netdev_class;
return (class->dump_queue_stats
? class->dump_queue_stats(netdev, cb, aux)
: EOPNOTSUPP);
}
/* Returns a sequence number which indicates changes in one of 'netdev''s
* properties. The returned sequence will be nonzero so that callers have a
* value which they may use as a reset when tracking 'netdev'.
*
* The returned sequence number will change whenever 'netdev''s flags,
* features, ethernet address, or carrier changes. It may change for other
* reasons as well, or no reason at all. */
unsigned int
netdev_change_seq(const struct netdev *netdev)
{
return netdev_get_dev(netdev)->netdev_class->change_seq(netdev);
}
/* If 'netdev' is a VLAN network device (e.g. one created with vconfig(8)),
* sets '*vlan_vid' to the VLAN VID associated with that device and returns 0.
* Otherwise returns a errno value (specifically ENOENT if 'netdev_name' is the
* name of a network device that is not a VLAN device) and sets '*vlan_vid' to
* -1. */
int
netdev_get_vlan_vid(const struct netdev *netdev, int *vlan_vid)
{
int error = (netdev_get_dev(netdev)->netdev_class->get_vlan_vid
? netdev_get_dev(netdev)->netdev_class->get_vlan_vid(netdev,
vlan_vid)
: ENOENT);
if (error) {
*vlan_vid = 0;
}
return error;
}
/* Initializes 'netdev_dev' as a netdev device named 'name' of the specified
* 'netdev_class'. This function is ordinarily called from a netdev provider's
* 'create' function.
*
* This function adds 'netdev_dev' to a netdev-owned shash, so it is
* very important that 'netdev_dev' only be freed after calling
* the refcount drops to zero. */
void
netdev_dev_init(struct netdev_dev *netdev_dev, const char *name,
const struct netdev_class *netdev_class)
{
assert(!shash_find(&netdev_dev_shash, name));
memset(netdev_dev, 0, sizeof *netdev_dev);
netdev_dev->netdev_class = netdev_class;
netdev_dev->name = xstrdup(name);
netdev_dev->node = shash_add(&netdev_dev_shash, name, netdev_dev);
}
/* Undoes the results of initialization.
*
* Normally this function does not need to be called as netdev_close has
* the same effect when the refcount drops to zero.
* However, it may be called by providers due to an error on creation
* that occurs after initialization. It this case netdev_close() would
* never be called. */
void
netdev_dev_uninit(struct netdev_dev *netdev_dev, bool destroy)
{
char *name = netdev_dev->name;
assert(!netdev_dev->ref_cnt);
shash_delete(&netdev_dev_shash, netdev_dev->node);
if (destroy) {
netdev_dev->netdev_class->destroy(netdev_dev);
}
free(name);
}
/* Returns the class type of 'netdev_dev'.
*
* The caller must not free the returned value. */
const char *
netdev_dev_get_type(const struct netdev_dev *netdev_dev)
{
return netdev_dev->netdev_class->type;
}
/* Returns the class associated with 'netdev_dev'. */
const struct netdev_class *
netdev_dev_get_class(const struct netdev_dev *netdev_dev)
{
return netdev_dev->netdev_class;
}
/* Returns the name of 'netdev_dev'.
*
* The caller must not free the returned value. */
const char *
netdev_dev_get_name(const struct netdev_dev *netdev_dev)
{
return netdev_dev->name;
}
/* Returns the netdev_dev with 'name' or NULL if there is none.
*
* The caller must not free the returned value. */
struct netdev_dev *
netdev_dev_from_name(const char *name)
{
return shash_find_data(&netdev_dev_shash, name);
}
/* Fills 'device_list' with devices that match 'netdev_class'.
*
* The caller is responsible for initializing and destroying 'device_list'
* but the contained netdev_devs must not be freed. */
void
netdev_dev_get_devices(const struct netdev_class *netdev_class,
struct shash *device_list)
{
struct shash_node *node;
SHASH_FOR_EACH (node, &netdev_dev_shash) {
struct netdev_dev *dev = node->data;
if (dev->netdev_class == netdev_class) {
shash_add(device_list, node->name, node->data);
}
}
}
/* Initializes 'netdev' as a instance of the netdev_dev.
*
* This function adds 'netdev' to a netdev-owned linked list, so it is very
* important that 'netdev' only be freed after calling netdev_close(). */
void
netdev_init(struct netdev *netdev, struct netdev_dev *netdev_dev)
{
memset(netdev, 0, sizeof *netdev);
netdev->netdev_dev = netdev_dev;
list_push_back(&netdev_list, &netdev->node);
}
/* Undoes the results of initialization.
*
* Normally this function only needs to be called from netdev_close().
* However, it may be called by providers due to an error on opening
* that occurs after initialization. It this case netdev_close() would
* never be called. */
void
netdev_uninit(struct netdev *netdev, bool close)
{
/* Restore flags that we changed, if any. */
int error = restore_flags(netdev);
list_remove(&netdev->node);
if (error) {
VLOG_WARN("failed to restore network device flags on %s: %s",
netdev_get_name(netdev), strerror(error));
}
if (close) {
netdev_get_dev(netdev)->netdev_class->close(netdev);
}
}
/* Returns the class type of 'netdev'.
*
* The caller must not free the returned value. */
const char *
netdev_get_type(const struct netdev *netdev)
{
return netdev_get_dev(netdev)->netdev_class->type;
}
struct netdev_dev *
netdev_get_dev(const struct netdev *netdev)
{
return netdev->netdev_dev;
}
/* Restore the network device flags on 'netdev' to those that were active
* before we changed them. Returns 0 if successful, otherwise a positive
* errno value.
*
* To avoid reentry, the caller must ensure that fatal signals are blocked. */
static int
restore_flags(struct netdev *netdev)
{
if (netdev->changed_flags) {
enum netdev_flags restore = netdev->save_flags & netdev->changed_flags;
enum netdev_flags old_flags;
return netdev_get_dev(netdev)->netdev_class->update_flags(netdev,
netdev->changed_flags & ~restore,
restore, &old_flags);
}
return 0;
}
/* Close all netdevs on shutdown so they can do any needed cleanup such as
* destroying devices, restoring flags, etc. */
static void
close_all_netdevs(void *aux OVS_UNUSED)
{
struct netdev *netdev, *next;
LIST_FOR_EACH_SAFE(netdev, next, node, &netdev_list) {
netdev_close(netdev);
}
}