ovn-nbctl: Update logical switch port commands.

A few minor changes related to logical switch port commands: - Use "lsp" instead of "lport" to be more consistent with later changes. - Use commands where possible in ovn unit tests. - Update references from "lport" to "lsp" (code) or "port" (user). Signed-off-by: Justin Pettit <jpettit@ovn.org> Acked-by: Ryan Moats <rmoats@us.ibm.com> Acked-by: Ben Pfaff <blp@ovn.org>
2025-08-22 01:51:26 +00:00 · 2016-06-07 16:43:34 -07:00 · 2016-06-07 16:43:34 -07:00 · 31ed1192e2
commit 31ed1192e2
parent 80f408f4cf
19 changed files with 409 additions and 406 deletions
--- a/INSTALL.Docker.md
+++ b/INSTALL.Docker.md
@ -157,7 +157,7 @@ Docker currently does not have a CLI command to list all your logical ports.
 But you can look at them in the OVN database, by running:

 ```
-ovn-nbctl --db=tcp:$CENTRAL_IP:6640 lport-list $NID
+ovn-nbctl --db=tcp:$CENTRAL_IP:6640 lsp-list $NID
 ```

 * You can also create a logical port and attach it to a running container.
--- a/ovn/utilities/ovn-docker-overlay-driver
+++ b/ovn/utilities/ovn-docker-overlay-driver
@ -228,9 +228,9 @@ def create_endpoint():
    mac_address_output = ""

    try:
-        ovn_nbctl("lport-add", nid, eid)
+        ovn_nbctl("lsp-add", nid, eid)
    except Exception as e:
-        error = "create_endpoint: lport-add (%s)" % (str(e))
+        error = "create_endpoint: lsp-add (%s)" % (str(e))
        return jsonify({'Err': error})

    if not mac_address_input:
@ -243,10 +243,10 @@ def create_endpoint():
        mac_address = mac_address_input

    try:
-        ovn_nbctl("lport-set-addresses", eid,
+        ovn_nbctl("lsp-set-addresses", eid,
                  mac_address + " " + ip_address)
    except Exception as e:
-        error = "create_endpoint: lport-set-addresses (%s)" % (str(e))
+        error = "create_endpoint: lsp-set-addresses (%s)" % (str(e))
        return jsonify({'Err': error})

    # Only return a mac address if one did not come as request.
@ -295,7 +295,8 @@ def show_endpoint():
        if error:
            jsonify({'Err': error})
    except Exception as e:
-        error = "show_endpoint: get Logical_Switch_Port addresses. (%s)" % (str(e))
+        error = "show_endpoint: get Logical_Switch_Port addresses. (%s)" \
+                % (str(e))
        return jsonify({'Err': error})

    veth_outside = eid[0:15]
@ -321,9 +322,9 @@ def delete_endpoint():
        abort(400)

    try:
-        ovn_nbctl("lport-del", eid)
+        ovn_nbctl("lsp-del", eid)
    except Exception as e:
-        error = "delete_endpoint: lport-del %s" % (str(e))
+        error = "delete_endpoint: lsp-del %s" % (str(e))
        return jsonify({'Err': error})

    return jsonify({})
--- a/ovn/utilities/ovn-nbctl.8.xml
+++ b/ovn/utilities/ovn-nbctl.8.xml
@ -94,17 +94,17 @@
      </dd>
    </dl>

-    <h1>Logical Port Commands</h1>
+    <h1>Logical Switch Port Commands</h1>
    <dl>
-      <dt>[<code>--may-exist</code>] <code>lport-add</code> <var>lswitch</var> <var>lport</var></dt>
+      <dt>[<code>--may-exist</code>] <code>lsp-add</code> <var>lswitch</var> <var>port</var></dt>
      <dd>
        <p>
-          Creates on <var>lswitch</var> a new logical port named
-          <var>lport</var>.
+          Creates on <var>lswitch</var> a new logical switch port named
+          <var>port</var>.
        </p>

        <p>
-          It is an error if a logical port named <var>lport</var> already
+          It is an error if a logical port named <var>port</var> already
          exists, unless <code>--may-exist</code> is specified.  Regardless of
          <code>--may-exist</code>, it is an error if the existing port is in
          some logical switch other than <var>lswitch</var> or if it has a
@ -112,19 +112,19 @@
        </p>
      </dd>

-      <dt>[<code>--may-exist</code>] <code>lport-add</code> <var>lswitch</var> <var>lport</var> <var>parent</var> <var>tag</var></dt>
+      <dt>[<code>--may-exist</code>] <code>lsp-add</code> <var>lswitch</var> <var>port</var> <var>parent</var> <var>tag</var></dt>
      <dd>
        <p>
-          Creates on <var>lswitch</var> a logical port named <var>lport</var>
-          that is a child of <var>parent</var> that is identifed with VLAN ID
-          <var>tag</var>.  This is useful in cases such as virtualized
-          container environments where Open vSwitch does not have a direct
-          connection to the container's port and it must be shared with
-          the virtual machine's port.
+          Creates on <var>lswitch</var> a logical switch port named
+          <var>port</var> that is a child of <var>parent</var> that is
+          identifed with VLAN ID <var>tag</var>.  This is useful in
+          cases such as virtualized container environments where Open
+          vSwitch does not have a direct connection to the container's
+          port and it must be shared with the virtual machine's port.
        </p>

        <p>
-          It is an error if a logical port named <var>lport</var> already
+          It is an error if a logical port named <var>port</var> already
          exists, unless <code>--may-exist</code> is specified.  Regardless of
          <code>--may-exist</code>, it is an error if the existing port is not
          in <var>lswitch</var> or if it does not have the specified
@ -132,55 +132,55 @@
        </p>
      </dd>

-      <dt>[<code>--if-exists</code>] <code>lport-del</code> <var>lport</var></dt>
+      <dt>[<code>--if-exists</code>] <code>lsp-del</code> <var>port</var></dt>
      <dd>
-        Deletes <var>lport</var>.  It is an error if <var>lport</var> does
+        Deletes <var>port</var>.  It is an error if <var>port</var> does
        not exist, unless <code>--if-exists</code> is specified.
      </dd>

-      <dt><code>lport-list</code> <var>lswitch</var></dt>
+      <dt><code>lsp-list</code> <var>lswitch</var></dt>
      <dd>
-        Lists all the logical ports within <var>lswitch</var> on
+        Lists all the logical switch ports within <var>lswitch</var> on
        standard output, one per line.
      </dd>

-      <dt><code>lport-get-parent</code> <var>lport</var></dt>
+      <dt><code>lsp-get-parent</code> <var>port</var></dt>
      <dd>
-        If set, get the parent port of <var>lport</var>.  If not set, print
+        If set, get the parent port of <var>port</var>.  If not set, print
        nothing.
      </dd>

-      <dt><code>lport-get-tag</code> <var>lport</var></dt>
+      <dt><code>lsp-get-tag</code> <var>port</var></dt>
      <dd>
-        If set, get the tag for <var>lport</var> traffic.  If not set, print
+        If set, get the tag for <var>port</var> traffic.  If not set, print
        nothing.
      </dd>

-      <dt><code>lport-set-addresses</code> <var>lport</var> [<var>address</var>]...</dt>
+      <dt><code>lsp-set-addresses</code> <var>port</var> [<var>address</var>]...</dt>
      <dd>
-        Sets the addresses associated with <var>lport</var> to
+        Sets the addresses associated with <var>port</var> to
        <var>address</var>.  Each <var>address</var> should be either an
        Ethernet address or an Ethernet address followed by an IP address
        (separated by a space and quoted to form a single command-line
        argument).  The special form <code>unknown</code> is also valid.
        Multiple Ethernet addresses or Ethernet+IP pairs may be set. If no
-        <var>address</var> argument is given, <var>lport</var> will have no
+        <var>address</var> argument is given, <var>port</var> will have no
        addresses associated with it.
      </dd>

-      <dt><code>lport-get-addresses</code> <var>lport</var></dt>
+      <dt><code>lsp-get-addresses</code> <var>port</var></dt>
      <dd>
-        Lists all the addresses associated with <var>lport</var> on standard
+        Lists all the addresses associated with <var>port</var> on standard
        output, one per line.
      </dd>

-      <dt><code>lport-set-port-security</code> <var>lport</var> [<var>addrs</var>]...</dt>
+      <dt><code>lsp-set-port-security</code> <var>port</var> [<var>addrs</var>]...</dt>
      <dd>
        <p>
-          Sets the port security addresses associated with <var>lport</var> to
+          Sets the port security addresses associated with <var>port</var> to
          <var>addrs</var>.  Multiple sets of addresses may be set by using
          multiple <var>addrs</var> arguments.  If no <var>addrs</var> argument
-          is given, <var>lport</var> will not have port security enabled.
+          is given, <var>port</var> will not have port security enabled.
        </p>

        <p>
@ -192,47 +192,47 @@
        </p>
      </dd>

-      <dt><code>lport-get-port-security</code> <var>lport</var></dt>
+      <dt><code>lsp-get-port-security</code> <var>port</var></dt>
      <dd>
-        Lists all the port security addresses associated with <var>lport</var>
+        Lists all the port security addresses associated with <var>port</var>
        on standard output, one per line.
      </dd>

-      <dt><code>lport-get-up</code> <var>lport</var></dt>
+      <dt><code>lsp-get-up</code> <var>port</var></dt>
      <dd>
-        Prints the state of <var>lport</var>, either <code>up</code> or
+        Prints the state of <var>port</var>, either <code>up</code> or
        <code>down</code>.
      </dd>

-      <dt><code>lport-set-enabled</code> <var>lport</var> <var>state</var></dt>
+      <dt><code>lsp-set-enabled</code> <var>port</var> <var>state</var></dt>
      <dd>
-        Set the administrative state of <var>lport</var>, either <code>enabled</code>
+        Set the administrative state of <var>port</var>, either <code>enabled</code>
        or <code>disabled</code>.  When a port is disabled, no traffic is allowed into
        or out of the port.
      </dd>

-      <dt><code>lport-get-enabled</code> <var>lport</var></dt>
+      <dt><code>lsp-get-enabled</code> <var>port</var></dt>
      <dd>
-        Prints the administrative state of <var>lport</var>, either <code>enabled</code>
+        Prints the administrative state of <var>port</var>, either <code>enabled</code>
        or <code>disabled</code>.
      </dd>

-      <dt><code>lport-set-type</code> <var>lport</var> <var>type</var></dt>
+      <dt><code>lsp-set-type</code> <var>port</var> <var>type</var></dt>
      <dd>
        Set the type for the logical port.  No special types have been implemented yet.
      </dd>

-      <dt><code>lport-get-type</code> <var>lport</var></dt>
+      <dt><code>lsp-get-type</code> <var>port</var></dt>
      <dd>
        Get the type for the logical port.
      </dd>

-      <dt><code>lport-set-options</code> <var>lport</var> [<var>key=value</var>]...</dt>
+      <dt><code>lsp-set-options</code> <var>port</var> [<var>key=value</var>]...</dt>
      <dd>
        Set type-specific key-value options for the logical port.
      </dd>

-      <dt><code>lport-get-options</code> <var>lport</var></dt>
+      <dt><code>lsp-get-options</code> <var>port</var></dt>
      <dd>
        Get the type-specific options for the logical port.
      </dd>
--- a/ovn/utilities/ovn-nbctl.c
+++ b/ovn/utilities/ovn-nbctl.c
@ -308,31 +308,31 @@ ACL commands:\n\
  acl-list LSWITCH          print ACLs for LSWITCH\n\
 \n\
 Logical switch port commands:\n\
-  lport-add LSWITCH LPORT   add logical port LPORT on LSWITCH\n\
-  lport-add LSWITCH LPORT PARENT TAG\n\
-                            add logical port LPORT on LSWITCH with PARENT\n\
+  lsp-add LSWITCH PORT      add logical port PORT on LSWITCH\n\
+  lsp-add LSWITCH PORT PARENT TAG\n\
+                            add logical port PORT on LSWITCH with PARENT\n\
                            on TAG\n\
-  lport-del LPORT           delete LPORT from its attached switch\n\
-  lport-list LSWITCH        print the names of all logical ports on LSWITCH\n\
-  lport-get-parent LPORT    get the parent of LPORT if set\n\
-  lport-get-tag LPORT       get the LPORT's tag if set\n\
-  lport-set-addresses LPORT [ADDRESS]...\n\
-                            set MAC or MAC+IP addresses for LPORT.\n\
-  lport-get-addresses LPORT      get a list of MAC addresses on LPORT\n\
-  lport-set-port-security LPORT [ADDRS]...\n\
-                            set port security addresses for LPORT.\n\
-  lport-get-port-security LPORT    get LPORT's port security addresses\n\
-  lport-get-up LPORT        get state of LPORT ('up' or 'down')\n\
-  lport-set-enabled LPORT STATE\n\
-                            set administrative state LPORT\n\
+  lsp-del PORT              delete PORT from its attached switch\n\
+  lsp-list LSWITCH          print the names of all logical ports on LSWITCH\n\
+  lsp-get-parent PORT       get the parent of PORT if set\n\
+  lsp-get-tag PORT          get the PORT's tag if set\n\
+  lsp-set-addresses PORT [ADDRESS]...\n\
+                            set MAC or MAC+IP addresses for PORT.\n\
+  lsp-get-addresses PORT    get a list of MAC addresses on PORT\n\
+  lsp-set-port-security PORT [ADDRS]...\n\
+                            set port security addresses for PORT.\n\
+  lsp-get-port-security PORT    get PORT's port security addresses\n\
+  lsp-get-up PORT           get state of PORT ('up' or 'down')\n\
+  lsp-set-enabled PORT STATE\n\
+                            set administrative state PORT\n\
                            ('enabled' or 'disabled')\n\
-  lport-get-enabled LPORT   get administrative state LPORT\n\
+  lsp-get-enabled PORT      get administrative state PORT\n\
                            ('enabled' or 'disabled')\n\
-  lport-set-type LPORT TYPE Set the type for LPORT\n\
-  lport-get-type LPORT      Get the type for LPORT\n\
-  lport-set-options LPORT KEY=VALUE [KEY=VALUE]...\n\
-                            Set options related to the type of LPORT\n\
-  lport-get-options LPORT   Get the type specific options for LPORT\n\
+  lsp-set-type PORT TYPE    set the type for PORT\n\
+  lsp-get-type PORT         get the type for PORT\n\
+  lsp-set-options PORT KEY=VALUE [KEY=VALUE]...\n\
+                            set options related to the type of PORT\n\
+  lsp-get-options PORT      get the type specific options for PORT\n\
 \n\
 Logical router commands:\n\
  lr-add [ROUTER]           create a logical router named ROUTER\n\
@ -673,7 +673,7 @@ nbctl_lsp_add(struct ctl_context *ctx)
            ctl_fatal("%s: invalid tag", ctx->argv[4]);
        }
    } else {
-        ctl_fatal("lport-add with parent must also specify a tag");
+        ctl_fatal("lsp-add with parent must also specify a tag");
    }

    const char *lsp_name = ctx->argv[2];
@ -681,7 +681,7 @@ nbctl_lsp_add(struct ctl_context *ctx)
    lsp = lsp_by_name_or_uuid(ctx, lsp_name, false);
    if (lsp) {
        if (!may_exist) {
-            ctl_fatal("%s: an lport with this name already exists",
+            ctl_fatal("%s: a port with this name already exists",
                      lsp_name);
        }

@ -689,29 +689,29 @@ nbctl_lsp_add(struct ctl_context *ctx)
        lsw = lsp_to_lswitch(ctx->idl, lsp);
        if (lsw != lswitch) {
            char uuid_s[UUID_LEN + 1];
-            ctl_fatal("%s: lport already exists but in lswitch %s", lsp_name,
+            ctl_fatal("%s: port already exists but in lswitch %s", lsp_name,
                      lswitch_get_name(lsw, uuid_s, sizeof uuid_s));
        }

        if (parent_name) {
            if (!lsp->parent_name) {
-                ctl_fatal("%s: lport already exists but has no parent",
+                ctl_fatal("%s: port already exists but has no parent",
                          lsp_name);
            } else if (strcmp(parent_name, lsp->parent_name)) {
-                ctl_fatal("%s: lport already exists with different parent %s",
+                ctl_fatal("%s: port already exists with different parent %s",
                          lsp_name, lsp->parent_name);
            }

            if (!lsp->n_tag) {
-                ctl_fatal("%s: lport already exists but has no tag",
+                ctl_fatal("%s: port already exists but has no tag",
                          lsp_name);
            } else if (lsp->tag[0] != tag) {
-                ctl_fatal("%s: lport already exists with different "
+                ctl_fatal("%s: port already exists with different "
                          "tag %"PRId64, lsp_name, lsp->tag[0]);
            }
        } else {
            if (lsp->parent_name) {
-                ctl_fatal("%s: lport already exists but has parent %s",
+                ctl_fatal("%s: port already exists but has parent %s",
                          lsp_name, lsp->parent_name);
            }
        }
@ -2084,36 +2084,32 @@ static const struct ctl_command_syntax nbctl_commands[] = {
    { "acl-list", 1, 1, "LSWITCH", NULL, nbctl_acl_list, NULL, "", RO },

    /* logical switch port commands. */
-    { "lport-add", 2, 4, "LSWITCH LPORT [PARENT] [TAG]", NULL, nbctl_lsp_add,
+    { "lsp-add", 2, 4, "LSWITCH PORT [PARENT] [TAG]", NULL, nbctl_lsp_add,
      NULL, "--may-exist", RW },
-    { "lport-del", 1, 1, "LPORT", NULL, nbctl_lsp_del, NULL, "--if-exists",
-      RW },
-    { "lport-list", 1, 1, "LSWITCH", NULL, nbctl_lsp_list, NULL, "", RO },
-    { "lport-get-parent", 1, 1, "LPORT", NULL, nbctl_lsp_get_parent, NULL,
+    { "lsp-del", 1, 1, "PORT", NULL, nbctl_lsp_del, NULL, "--if-exists", RW },
+    { "lsp-list", 1, 1, "LSWITCH", NULL, nbctl_lsp_list, NULL, "", RO },
+    { "lsp-get-parent", 1, 1, "PORT", NULL, nbctl_lsp_get_parent, NULL,
      "", RO },
-    { "lport-get-tag", 1, 1, "LPORT", NULL, nbctl_lsp_get_tag, NULL, "",
-      RO },
-    { "lport-set-addresses", 1, INT_MAX, "LPORT [ADDRESS]...", NULL,
+    { "lsp-get-tag", 1, 1, "PORT", NULL, nbctl_lsp_get_tag, NULL, "", RO },
+    { "lsp-set-addresses", 1, INT_MAX, "PORT [ADDRESS]...", NULL,
      nbctl_lsp_set_addresses, NULL, "", RW },
-    { "lport-get-addresses", 1, 1, "LPORT", NULL,
-      nbctl_lsp_get_addresses, NULL,
+    { "lsp-get-addresses", 1, 1, "PORT", NULL, nbctl_lsp_get_addresses, NULL,
      "", RO },
-    { "lport-set-port-security", 0, INT_MAX, "LPORT [ADDRS]...", NULL,
+    { "lsp-set-port-security", 0, INT_MAX, "PORT [ADDRS]...", NULL,
      nbctl_lsp_set_port_security, NULL, "", RW },
-    { "lport-get-port-security", 1, 1, "LPORT", NULL,
+    { "lsp-get-port-security", 1, 1, "PORT", NULL,
      nbctl_lsp_get_port_security, NULL, "", RO },
-    { "lport-get-up", 1, 1, "LPORT", NULL, nbctl_lsp_get_up, NULL, "", RO },
-    { "lport-set-enabled", 2, 2, "LPORT STATE", NULL, nbctl_lsp_set_enabled,
+    { "lsp-get-up", 1, 1, "PORT", NULL, nbctl_lsp_get_up, NULL, "", RO },
+    { "lsp-set-enabled", 2, 2, "PORT STATE", NULL, nbctl_lsp_set_enabled,
      NULL, "", RW },
-    { "lport-get-enabled", 1, 1, "LPORT", NULL, nbctl_lsp_get_enabled, NULL,
+    { "lsp-get-enabled", 1, 1, "PORT", NULL, nbctl_lsp_get_enabled, NULL,
      "", RO },
-    { "lport-set-type", 2, 2, "LPORT TYPE", NULL, nbctl_lsp_set_type, NULL,
+    { "lsp-set-type", 2, 2, "PORT TYPE", NULL, nbctl_lsp_set_type, NULL,
      "", RW },
-    { "lport-get-type", 1, 1, "LPORT", NULL, nbctl_lsp_get_type, NULL, "",
-      RO },
-    { "lport-set-options", 1, INT_MAX, "LPORT KEY=VALUE [KEY=VALUE]...", NULL,
+    { "lsp-get-type", 1, 1, "PORT", NULL, nbctl_lsp_get_type, NULL, "", RO },
+    { "lsp-set-options", 1, INT_MAX, "PORT KEY=VALUE [KEY=VALUE]...", NULL,
      nbctl_lsp_set_options, NULL, "", RW },
-    { "lport-get-options", 1, 1, "LPORT", NULL, nbctl_lsp_get_options, NULL,
+    { "lsp-get-options", 1, 1, "PORT", NULL, nbctl_lsp_get_options, NULL,
      "", RO },

    /* logical router commands. */
--- a/tests/ovn-controller-vtep.at
+++ b/tests/ovn-controller-vtep.at
@ -102,10 +102,10 @@ m4_define([OVN_CONTROLLER_VTEP_STOP],
 # $3: physical vtep gateway name
 # $4: logical switch name on vtep gateway chassis
 m4_define([OVN_NB_ADD_VTEP_PORT], [
-AT_CHECK([ovn-nbctl lport-add $1 $2])
+AT_CHECK([ovn-nbctl lsp-add $1 $2])

-AT_CHECK([ovn-nbctl lport-set-type $2 vtep])
-AT_CHECK([ovn-nbctl lport-set-options $2 vtep-physical-switch=$3 vtep-logical-switch=$4])
+AT_CHECK([ovn-nbctl lsp-set-type $2 vtep])
+AT_CHECK([ovn-nbctl lsp-set-options $2 vtep-physical-switch=$3 vtep-logical-switch=$4])
 ])

 ##############################################
@ -321,7 +321,7 @@ ${tunnel_key}

 # changes the ovn-nb logical port type so that it is no longer
 # vtep port.
-AT_CHECK([ovn-nbctl lport-set-type br-vtep_lswitch0 void])
+AT_CHECK([ovn-nbctl lsp-set-type br-vtep_lswitch0 void])
 OVS_WAIT_UNTIL([test -z "`vtep-ctl --columns=tunnel_key list Logical_Switch | grep 1`"])
 # now should see the tunnel key reset.
 AT_CHECK([vtep-ctl --columns=tunnel_key list Logical_Switch | cut -d ':' -f2 | tr -d ' '], [0], [dnl
@ -338,8 +338,8 @@ OVN_CONTROLLER_VTEP_START

 # creates a simple logical network with the vtep device and a fake hv chassis
 # 'ch0'.
-AT_CHECK([ovn-nbctl lport-add br-test vif0])
-AT_CHECK([ovn-nbctl lport-set-addresses vif0 f0:ab:cd:ef:01:02])
+AT_CHECK([ovn-nbctl lsp-add br-test vif0])
+AT_CHECK([ovn-nbctl lsp-set-addresses vif0 f0:ab:cd:ef:01:02])
 AT_CHECK([ovn-sbctl chassis-add ch0 vxlan 1.2.3.5])
 AT_CHECK([ovn-sbctl lport-bind vif0 ch0])

@ -352,8 +352,8 @@ OVS_WAIT_UNTIL([test -n "`ovn-sbctl list Port_Binding  | grep br-vtep_lswitch0`"
 # adds another lswitch 'br-void' in ovn-nb database.
 AT_CHECK([ovn-nbctl lswitch-add br-void])
 # adds fake hv chassis 'ch1'.
-AT_CHECK([ovn-nbctl lport-add br-void vif1])
-AT_CHECK([ovn-nbctl lport-set-addresses vif1 f0:ab:cd:ef:01:02])
+AT_CHECK([ovn-nbctl lsp-add br-void vif1])
+AT_CHECK([ovn-nbctl lsp-set-addresses vif1 f0:ab:cd:ef:01:02])
 AT_CHECK([ovn-sbctl chassis-add ch1 vxlan 1.2.3.6])
 AT_CHECK([ovn-sbctl lport-bind vif1 ch1])
 OVS_WAIT_UNTIL([test -n "`ovn-sbctl list Port_Binding | grep vif1`"])
@ -377,7 +377,7 @@ AT_CHECK([ovs-vsctl --columns=options list Interface bfd1.2.3.5 | cut -d ':' -f2
 ])

 # adds another mac to logical switch port.
-AT_CHECK([ovn-nbctl lport-set-addresses vif0 f0:ab:cd:ef:01:02 f0:ab:cd:ef:01:03])
+AT_CHECK([ovn-nbctl lsp-set-addresses vif0 f0:ab:cd:ef:01:02 f0:ab:cd:ef:01:03])
 OVS_WAIT_UNTIL([test -n "`vtep-ctl list Ucast_Macs_Remote | grep 03`"])
 AT_CHECK([vtep-ctl --columns=MAC list Ucast_Macs_Remote | cut -d ':' -f2- | tr -d ' ' | sort], [0], [dnl

@ -386,15 +386,15 @@ AT_CHECK([vtep-ctl --columns=MAC list Ucast_Macs_Remote | cut -d ':' -f2- | tr -
 ])

 # removes one mac to logical switch port.
-AT_CHECK([ovn-nbctl lport-set-addresses vif0 f0:ab:cd:ef:01:03])
+AT_CHECK([ovn-nbctl lsp-set-addresses vif0 f0:ab:cd:ef:01:03])
 OVS_WAIT_UNTIL([test -z "`vtep-ctl --columns=MAC list Ucast_Macs_Remote | grep 02`"])
 AT_CHECK([vtep-ctl --columns=MAC list Ucast_Macs_Remote | cut -d ':' -f2- | tr -d ' ' | sort], [0], [dnl
 "f0:ab:cd:ef:01:03"
 ])

 # migrates mac to logical switch port vif1 on 'br-void'.
-AT_CHECK([ovn-nbctl lport-set-addresses vif0])
-AT_CHECK([ovn-nbctl lport-set-addresses vif1 f0:ab:cd:ef:01:03])
+AT_CHECK([ovn-nbctl lsp-set-addresses vif0])
+AT_CHECK([ovn-nbctl lsp-set-addresses vif1 f0:ab:cd:ef:01:03])
 OVS_WAIT_UNTIL([test -z "`vtep-ctl --columns=MAC list Ucast_Macs_Remote | grep 03`"])
 AT_CHECK([vtep-ctl --columns=MAC list Ucast_Macs_Remote | cut -d ':' -f2- | tr -d ' ' | sort], [0], [dnl
 ])
@ -409,14 +409,14 @@ OVN_CONTROLLER_VTEP_START

 # creates a simple logical network with the vtep device and a fake hv chassis
 # 'ch0'.
-AT_CHECK([ovn-nbctl lport-add br-test vif0])
-AT_CHECK([ovn-nbctl lport-set-addresses vif0 f0:ab:cd:ef:01:02])
+AT_CHECK([ovn-nbctl lsp-add br-test vif0])
+AT_CHECK([ovn-nbctl lsp-set-addresses vif0 f0:ab:cd:ef:01:02])
 AT_CHECK([ovn-sbctl chassis-add ch0 vxlan 1.2.3.5])
 AT_CHECK([ovn-sbctl lport-bind vif0 ch0])

 # creates another vif in the same logical switch with duplicate mac.
-AT_CHECK([ovn-nbctl lport-add br-test vif1])
-AT_CHECK([ovn-nbctl lport-set-addresses vif1 f0:ab:cd:ef:01:02])
+AT_CHECK([ovn-nbctl lsp-add br-test vif1])
+AT_CHECK([ovn-nbctl lsp-set-addresses vif1 f0:ab:cd:ef:01:02])
 AT_CHECK([ovn-sbctl lport-bind vif1 ch0])

 # creates the logical switch in vtep and adds the corresponding logical
@ -438,13 +438,13 @@ AT_CHECK([sed -n 's/^.*\(|WARN|.*\)$/\1/p' ovn-controller-vtep.log | sed 's/([[-
 ])

 # deletes vif1.
-AT_CHECK([ovn-nbctl lport-del vif1])
+AT_CHECK([ovn-nbctl lsp-del vif1])

 # adds another lswitch 'br-void' in ovn-nb database.
 AT_CHECK([ovn-nbctl lswitch-add br-void])
 # adds fake hv chassis 'ch1' and vif1 with same mac address as vif0.
-AT_CHECK([ovn-nbctl lport-add br-void vif1])
-AT_CHECK([ovn-nbctl lport-set-addresses vif1 f0:ab:cd:ef:01:02])
+AT_CHECK([ovn-nbctl lsp-add br-void vif1])
+AT_CHECK([ovn-nbctl lsp-set-addresses vif1 f0:ab:cd:ef:01:02])
 AT_CHECK([ovn-sbctl chassis-add ch1 vxlan 1.2.3.6])
 AT_CHECK([ovn-sbctl lport-bind vif1 ch1])
 OVS_WAIT_UNTIL([test -n "`ovn-sbctl list Port_Binding | grep vif1`"])
--- a/tests/ovn-nbctl.at
+++ b/tests/ovn-nbctl.at
@ -87,51 +87,51 @@ AT_CLEANUP

 dnl ---------------------------------------------------------------------

-AT_SETUP([ovn-nbctl - basic lport commands])
+AT_SETUP([ovn-nbctl - basic logical switch port commands])
 OVN_NBCTL_TEST_START

 AT_CHECK([ovn-nbctl lswitch-add ls0])
-AT_CHECK([ovn-nbctl lport-add ls0 lp0])
-AT_CHECK([ovn-nbctl lport-add ls0 lp0], [1], [],
-  [ovn-nbctl: lp0: an lport with this name already exists
+AT_CHECK([ovn-nbctl lsp-add ls0 lp0])
+AT_CHECK([ovn-nbctl lsp-add ls0 lp0], [1], [],
+  [ovn-nbctl: lp0: a port with this name already exists
 ])
-AT_CHECK([ovn-nbctl --may-exist lport-add ls0 lp0])
-AT_CHECK([ovn-nbctl lport-list ls0 | ${PERL} $srcdir/uuidfilt.pl], [0], [dnl
+AT_CHECK([ovn-nbctl --may-exist lsp-add ls0 lp0])
+AT_CHECK([ovn-nbctl lsp-list ls0 | ${PERL} $srcdir/uuidfilt.pl], [0], [dnl
 <0> (lp0)
 ])

-AT_CHECK([ovn-nbctl lport-add ls0 lp1])
-AT_CHECK([ovn-nbctl lport-list ls0 | ${PERL} $srcdir/uuidfilt.pl], [0], [dnl
+AT_CHECK([ovn-nbctl lsp-add ls0 lp1])
+AT_CHECK([ovn-nbctl lsp-list ls0 | ${PERL} $srcdir/uuidfilt.pl], [0], [dnl
 <0> (lp0)
 <1> (lp1)
 ])

 AT_CHECK([ovn-nbctl lswitch-add ls1])
-AT_CHECK([ovn-nbctl lport-add ls0 lp1], [1], [],
-  [ovn-nbctl: lp1: an lport with this name already exists
+AT_CHECK([ovn-nbctl lsp-add ls0 lp1], [1], [],
+  [ovn-nbctl: lp1: a port with this name already exists
 ])
-AT_CHECK([ovn-nbctl --may-exist lport-add ls1 lp1], [1], [],
-  [ovn-nbctl: lp1: lport already exists but in lswitch ls0
+AT_CHECK([ovn-nbctl --may-exist lsp-add ls1 lp1], [1], [],
+  [ovn-nbctl: lp1: port already exists but in lswitch ls0
 ])
-AT_CHECK([ovn-nbctl --may-exist lport-add ls0 lp1 lp0 5], [1], [],
-  [ovn-nbctl: lp1: lport already exists but has no parent
+AT_CHECK([ovn-nbctl --may-exist lsp-add ls0 lp1 lp0 5], [1], [],
+  [ovn-nbctl: lp1: port already exists but has no parent
 ])

-AT_CHECK([ovn-nbctl lport-del lp1])
-AT_CHECK([ovn-nbctl lport-list ls0 | ${PERL} $srcdir/uuidfilt.pl], [0], [dnl
+AT_CHECK([ovn-nbctl lsp-del lp1])
+AT_CHECK([ovn-nbctl lsp-list ls0 | ${PERL} $srcdir/uuidfilt.pl], [0], [dnl
 <0> (lp0)
 ])

-AT_CHECK([ovn-nbctl lport-add ls0 lp2 lp3 5])
-AT_CHECK([ovn-nbctl --may-exist lport-add ls0 lp2 lp4 5], [1], [],
-  [ovn-nbctl: lp2: lport already exists with different parent lp3
+AT_CHECK([ovn-nbctl lsp-add ls0 lp2 lp3 5])
+AT_CHECK([ovn-nbctl --may-exist lsp-add ls0 lp2 lp4 5], [1], [],
+  [ovn-nbctl: lp2: port already exists with different parent lp3
 ])
-AT_CHECK([ovn-nbctl --may-exist lport-add ls0 lp2 lp3 10], [1], [],
-  [ovn-nbctl: lp2: lport already exists with different tag 5
+AT_CHECK([ovn-nbctl --may-exist lsp-add ls0 lp2 lp3 10], [1], [],
+  [ovn-nbctl: lp2: port already exists with different tag 5
 ])
 AT_CHECK([ovn-nbctl clear Logical_Switch_Port lp2 tag])
-AT_CHECK([ovn-nbctl --may-exist lport-add ls0 lp2 lp3 5], [1], [],
-  [ovn-nbctl: lp2: lport already exists but has no tag
+AT_CHECK([ovn-nbctl --may-exist lsp-add ls0 lp2 lp3 5], [1], [],
+  [ovn-nbctl: lp2: port already exists but has no tag
 ])

 OVN_NBCTL_TEST_STOP
@ -143,18 +143,18 @@ AT_SETUP([ovn-nbctl - lport addresses])
 OVN_NBCTL_TEST_START

 AT_CHECK([ovn-nbctl lswitch-add ls0])
-AT_CHECK([ovn-nbctl lport-add ls0 lp0])
-AT_CHECK([ovn-nbctl lport-get-addresses lp0], [0], [dnl
+AT_CHECK([ovn-nbctl lsp-add ls0 lp0])
+AT_CHECK([ovn-nbctl lsp-get-addresses lp0], [0], [dnl
 ])

-AT_CHECK([ovn-nbctl lport-set-addresses lp0 00:11:22:33:44:55 unknown])
-AT_CHECK([ovn-nbctl lport-get-addresses lp0], [0], [dnl
+AT_CHECK([ovn-nbctl lsp-set-addresses lp0 00:11:22:33:44:55 unknown])
+AT_CHECK([ovn-nbctl lsp-get-addresses lp0], [0], [dnl
 00:11:22:33:44:55
 unknown
 ])

-AT_CHECK([ovn-nbctl lport-set-addresses lp0])
-AT_CHECK([ovn-nbctl lport-get-addresses lp0], [0], [dnl
+AT_CHECK([ovn-nbctl lsp-set-addresses lp0])
+AT_CHECK([ovn-nbctl lsp-get-addresses lp0], [0], [dnl
 ])

 OVN_NBCTL_TEST_STOP
@ -166,18 +166,18 @@ AT_SETUP([ovn-nbctl - port security])
 OVN_NBCTL_TEST_START

 AT_CHECK([ovn-nbctl lswitch-add ls0])
-AT_CHECK([ovn-nbctl lport-add ls0 lp0])
-AT_CHECK([ovn-nbctl lport-get-addresses lp0], [0], [dnl
+AT_CHECK([ovn-nbctl lsp-add ls0 lp0])
+AT_CHECK([ovn-nbctl lsp-get-addresses lp0], [0], [dnl
 ])

-AT_CHECK([ovn-nbctl lport-set-port-security lp0 aa:bb:cc:dd:ee:ff 00:11:22:33:44:55])
-AT_CHECK([ovn-nbctl lport-get-port-security lp0], [0], [dnl
+AT_CHECK([ovn-nbctl lsp-set-port-security lp0 aa:bb:cc:dd:ee:ff 00:11:22:33:44:55])
+AT_CHECK([ovn-nbctl lsp-get-port-security lp0], [0], [dnl
 00:11:22:33:44:55
 aa:bb:cc:dd:ee:ff
 ])

-AT_CHECK([ovn-nbctl lport-set-port-security lp0])
-AT_CHECK([ovn-nbctl lport-get-port-security lp0], [0], [dnl
+AT_CHECK([ovn-nbctl lsp-set-port-security lp0])
+AT_CHECK([ovn-nbctl lsp-get-port-security lp0], [0], [dnl
 ])

 OVN_NBCTL_TEST_STOP
--- a/tests/ovn-sbctl.at
+++ b/tests/ovn-sbctl.at
@ -80,8 +80,8 @@ AT_SETUP([ovn-sbctl])
 OVN_SBCTL_TEST_START

 AT_CHECK([ovn-nbctl lswitch-add br-test])
-AT_CHECK([ovn-nbctl lport-add br-test vif0])
-AT_CHECK([ovn-nbctl lport-set-addresses vif0 f0:ab:cd:ef:01:02])
+AT_CHECK([ovn-nbctl lsp-add br-test vif0])
+AT_CHECK([ovn-nbctl lsp-set-addresses vif0 f0:ab:cd:ef:01:02])
 AT_CHECK([ovn-sbctl chassis-add ch0 stt 1.2.3.5])
 AT_CHECK([ovn-sbctl lport-bind vif0 ch0])

@ -93,8 +93,8 @@ Chassis "ch0"
 ])

 # adds another 'vif1'
-AT_CHECK([ovn-nbctl lport-add br-test vif1])
-AT_CHECK([ovn-nbctl lport-set-addresses vif1 f0:ab:cd:ef:01:03])
+AT_CHECK([ovn-nbctl lsp-add br-test vif1])
+AT_CHECK([ovn-nbctl lsp-set-addresses vif1 f0:ab:cd:ef:01:03])
 AT_CHECK([ovn-sbctl lport-bind vif1 ch0])

 AT_CHECK([ovn-sbctl show | sed 's/vif[[0-9]]/vif/'], [0], [dnl
@ -106,7 +106,7 @@ Chassis "ch0"
 ])

 # deletes 'vif1'
-AT_CHECK([ovn-nbctl lport-del vif1])
+AT_CHECK([ovn-nbctl lsp-del vif1])

 AT_CHECK([ovn-sbctl show], [0], [dnl
 Chassis "ch0"
@ -123,9 +123,9 @@ chassis             : ${uuid}
 ])

 # test the passing down of logical port type and options.
-AT_CHECK([ovn-nbctl lport-add br-test vtep0])
-AT_CHECK([ovn-nbctl lport-set-type vtep0 vtep])
-AT_CHECK([ovn-nbctl lport-set-options vtep0 vtep_physical_switch=p0 vtep_logical_switch=l0])
+AT_CHECK([ovn-nbctl lsp-add br-test vtep0])
+AT_CHECK([ovn-nbctl lsp-set-type vtep0 vtep])
+AT_CHECK([ovn-nbctl lsp-set-options vtep0 vtep_physical_switch=p0 vtep_logical_switch=l0])

 OVS_WAIT_UNTIL([test -n "`ovn-sbctl --columns=logical_port list Port_Binding | grep vtep0`" ])
 AT_CHECK_UNQUOTED([ovn-sbctl --columns=logical_port,mac,type,options list Port_Binding vtep0], [0], [dnl
--- a/tests/ovn.at
+++ b/tests/ovn.at
@ -565,17 +565,17 @@ for i in 1 2 3; do

    for j in 1 2 3; do
        ovs-vsctl add-port br-int vif$i$j -- set Interface vif$i$j external-ids:iface-id=lp$i$j options:tx_pcap=hv$i/vif$i$j-tx.pcap options:rxq_pcap=hv$i/vif$i$j-rx.pcap ofport-request=$i$j
-        ovn-nbctl lport-add lsw0 lp$i$j
+        ovn-nbctl lsp-add lsw0 lp$i$j
        if test $j = 1; then
-            ovn-nbctl lport-set-addresses lp$i$j "f0:00:00:00:00:$i$j 192.168.0.$i$j" unknown
+            ovn-nbctl lsp-set-addresses lp$i$j "f0:00:00:00:00:$i$j 192.168.0.$i$j" unknown
        else
            if test $j = 3; then
                ip_addrs="192.168.0.$i$j fe80::ea2a:eaff:fe28:$i$j/64 192.169.0.$i$j"
            else
                ip_addrs="192.168.0.$i$j"
            fi
-            ovn-nbctl lport-set-addresses lp$i$j "f0:00:00:00:00:$i$j $ip_addrs"
-            ovn-nbctl lport-set-port-security lp$i$j f0:00:00:00:00:$i$j
+            ovn-nbctl lsp-set-addresses lp$i$j "f0:00:00:00:00:$i$j $ip_addrs"
+            ovn-nbctl lsp-set-port-security lp$i$j f0:00:00:00:00:$i$j
        fi
    done
 done
@ -604,7 +604,7 @@ vif_to_hv() {
 # content has Ethernet destination DST and source SRC (each exactly 12 hex
 # digits) and Ethernet type ETHTYPE (4 hex digits).  The OUTPORTs (zero or
 # more) list the VIFs on which the packet should be received.  INPORT and the
-# OUTPORTs are specified as lport numbers, e.g. 11 for vif11.
+# OUTPORTs are specified as logical switch port numbers, e.g. 11 for vif11.
 trim_zeros() {
    sed 's/\(00\)\{1,\}$//'
 }
@ -630,7 +630,7 @@ test_packet() {
 # it should be the hardware address of the target to expect to receive in an
 # ARP reply; otherwise no reply is expected.
 #
-# INPORT is an lport number, e.g. 11 for vif11.
+# INPORT is an logical switch port number, e.g. 11 for vif11.
 # SHA and REPLY_HA are each 12 hex digits.
 # SPA and TPA are each 8 hex digits.
 test_arp() {
@ -663,10 +663,11 @@ ip_to_hex() {

 # Send packets between all pairs of source and destination ports:
 #
-# 1. Unicast packets are delivered to exactly one lport (except that packets
-#    destined to their input ports are dropped).
+# 1. Unicast packets are delivered to exactly one logical switch port
+#    (except that packets destined to their input ports are dropped).
 #
-# 2. Broadcast and multicast are delivered to all lports except the input port.
+# 2. Broadcast and multicast are delivered to all logical switch ports
+#    except the input port.
 #
 # 3. When port security is turned on, the lswitch drops packets from the wrong
 #    MAC address.
@ -677,8 +678,9 @@ ip_to_hex() {
 #    affects behavior when port security is turned off, since otherwise port
 #    security would drop the packet anyway.)
 #
-# 6. The lswitch delivers packets with an unknown destination to lports with
-#    "unknown" among their MAC addresses (and port security disabled).
+# 6. The lswitch delivers packets with an unknown destination to logical
+#    switch ports with "unknown" among their MAC addresses (and port
+#    security disabled).
 #
 # 7. The lswitch drops unicast packets that violate an ACL.
 #
@ -731,7 +733,7 @@ for is in 1 2 3; do
                test_arp $s f000000000$s $sip $tip_unknown                 #10

                if test $jd = 3; then
-                    # lport[123]3 has an additional ip 192.169.0.[123]3.
+                    # lsp[123]3 has an additional ip 192.169.0.[123]3.
                    tip=`ip_to_hex 192 169 0 $id$jd`
                    test_arp $s f000000000$s $sip $tip f000000000$d        #9
                fi
@ -761,7 +763,7 @@ done

 # set address for lp13 with invalid characters.
 # lp13 should be configured with only 192.168.0.13.
-ovn-nbctl lport-set-addresses lp13 "f0:00:00:00:00:13 192.168.0.13 invalid 192.169.0.13"
+ovn-nbctl lsp-set-addresses lp13 "f0:00:00:00:00:13 192.168.0.13 invalid 192.169.0.13"
 sip=`ip_to_hex 192 168 0 11`
 tip=`ip_to_hex 192 168 0 13`
 test_arp 11 f00000000011  $sip $tip f00000000013
@ -837,7 +839,7 @@ ovn_start
 # of VIF port name indicates the hypervisor it is bound to, e.g.
 # lp23 means VIF 3 on hv2.
 #
-# lswitch's VLAN tag and their lports are:
+# lswitch's VLAN tag and their logical switch ports are:
 #   - ls1:
 #       - untagged
 #       - lports: lp11, lp12, lp21, lp22
@ -857,13 +859,13 @@ for i in 1 2 3; do
    ovn-nbctl lswitch-add $lswitch_name
    ln_port_name=ln$i
    if test $i -eq 2; then
-        ovn-nbctl lport-add $lswitch_name $ln_port_name "" 101
+        ovn-nbctl lsp-add $lswitch_name $ln_port_name "" 101
    else
-        ovn-nbctl lport-add $lswitch_name $ln_port_name
+        ovn-nbctl lsp-add $lswitch_name $ln_port_name
    fi
-    ovn-nbctl lport-set-addresses $ln_port_name unknown
-    ovn-nbctl lport-set-type $ln_port_name localnet
-    ovn-nbctl lport-set-options $ln_port_name network_name=phys
+    ovn-nbctl lsp-set-addresses $ln_port_name unknown
+    ovn-nbctl lsp-set-type $ln_port_name localnet
+    ovn-nbctl lsp-set-options $ln_port_name network_name=phys
 done

 net_add n1
@ -881,7 +883,7 @@ for i in 1 2; do
                                  options:rxq_pcap=hv$i/vif$i$j-rx.pcap \
                                  ofport-request=$i$j

-        lport_name=lp$i$j
+        lsp_name=lp$i$j
        if test $j -le 2; then
            lswitch_name=ls1
        elif test $j -le 4; then
@ -890,11 +892,11 @@ for i in 1 2; do
            lswitch_name=ls3
        fi

-        ovn-nbctl lport-add $lswitch_name $lport_name
-        ovn-nbctl lport-set-addresses $lport_name f0:00:00:00:00:$i$j
-        ovn-nbctl lport-set-port-security $lport_name f0:00:00:00:00:$i$j
+        ovn-nbctl lsp-add $lswitch_name $lsp_name
+        ovn-nbctl lsp-set-addresses $lsp_name f0:00:00:00:00:$i$j
+        ovn-nbctl lsp-set-port-security $lsp_name f0:00:00:00:00:$i$j

-        OVS_WAIT_UNTIL([test x`ovn-nbctl lport-get-up $lport_name` = xup])
+        OVS_WAIT_UNTIL([test x`ovn-nbctl lsp-get-up $lsp_name` = xup])
    done
 done

@ -914,7 +916,7 @@ vif_to_hv() {
 # content has Ethernet destination DST and source SRC (each exactly 12 hex
 # digits) and Ethernet type ETHTYPE (4 hex digits).  The OUTPORTs (zero or
 # more) list the VIFs on which the packet should be received.  INPORT and the
-# OUTPORTs are specified as lport numbers, e.g. 11 for vif11.
+# OUTPORTs are specified as logical switch port numbers, e.g. 11 for vif11.
 trim_zeros() {
    sed 's/\(00\)\{1,\}$//'
 }
@ -1034,16 +1036,16 @@ ovn_start
 # Configure the Northbound database
 ovn-nbctl lswitch-add lsw0

-ovn-nbctl lport-add lsw0 lp1
-ovn-nbctl lport-set-addresses lp1 f0:00:00:00:00:01
+ovn-nbctl lsp-add lsw0 lp1
+ovn-nbctl lsp-set-addresses lp1 f0:00:00:00:00:01

-ovn-nbctl lport-add lsw0 lp2
-ovn-nbctl lport-set-addresses lp2 f0:00:00:00:00:02
+ovn-nbctl lsp-add lsw0 lp2
+ovn-nbctl lsp-set-addresses lp2 f0:00:00:00:00:02

-ovn-nbctl lport-add lsw0 lp-vtep
-ovn-nbctl lport-set-type lp-vtep vtep
-ovn-nbctl lport-set-options lp-vtep vtep-physical-switch=br-vtep vtep-logical-switch=lsw0
-ovn-nbctl lport-set-addresses lp-vtep unknown
+ovn-nbctl lsp-add lsw0 lp-vtep
+ovn-nbctl lsp-set-type lp-vtep vtep
+ovn-nbctl lsp-set-options lp-vtep vtep-physical-switch=br-vtep vtep-logical-switch=lsw0
+ovn-nbctl lsp-set-addresses lp-vtep unknown

 net_add n1               # Network to connect hv1, hv2, and vtep
 net_add n2               # Network to connect vtep and hv3
@ -1117,7 +1119,7 @@ sleep 1
 # content has Ethernet destination DST and source SRC (each exactly 12 hex
 # digits) and Ethernet type ETHTYPE (4 hex digits).  The OUTPORTs (zero or
 # more) list the VIFs on which the packet should be received.  INPORT and the
-# OUTPORTs are specified as lport numbers, e.g. 1 for vif1.
+# OUTPORTs are specified as logical switch port numbers, e.g. 1 for vif1.
 trim_zeros() {
    sed 's/\(00\)\{1,\}$//'
 }
@ -1137,13 +1139,15 @@ test_packet() {

 # Send packets between all pairs of source and destination ports:
 #
-# 1. Unicast packets are delivered to exactly one lport (except that packets
-#    destined to their input ports are dropped).
+# 1. Unicast packets are delivered to exactly one logical switch port
+#    (except that packets destined to their input ports are dropped).
 #
-# 2. Broadcast and multicast are delivered to all lports except the input port.
+# 2. Broadcast and multicast are delivered to all logical switch ports
+#    except the input port.
 #
-# 3. The lswitch delivers packets with an unknown destination to lports with
-#    "unknown" among their MAC addresses (and port security disabled).
+# 3. The lswitch delivers packets with an unknown destination to logical
+#    switch ports with "unknown" among their MAC addresses (and port
+#    security disabled).
 for s in 1 2 3; do
    bcast=
    unknown=
@ -1252,13 +1256,14 @@ for i in 1 2 3; do
    ovn-nbctl lswitch-add ls$i
    for j in 1 2 3; do
        for k in 1 2 3; do
-	    # Add "unknown" to MAC addresses for lp?11, so packets for
-	    # MAC-IP bindings discovered via ARP later have somewhere to go.
-	    if test $j$k = 11; then unknown=unknown; else unknown=; fi
+            # Add "unknown" to MAC addresses for lp?11, so packets for
+            # MAC-IP bindings discovered via ARP later have somewhere to go.
+            if test $j$k = 11; then unknown=unknown; else unknown=; fi

-	    ovn-nbctl \
-		-- lport-add ls$i lp$i$j$k \
-		-- lport-set-addresses lp$i$j$k "f0:00:00:00:0$i:$j$k 192.168.$i$j.$k" $unknown
+            ovn-nbctl \
+                -- lsp-add ls$i lp$i$j$k \
+                -- lsp-set-addresses lp$i$j$k "f0:00:00:00:0$i:$j$k \
+                   192.168.$i$j.$k" $unknown
        done
    done
 done
@ -1269,7 +1274,7 @@ for i in 1 2 3; do
 	    ovn-nbctl lrp-add lr0 lrp$i$j 00:00:00:00:ff:$i$j \
            192.168.$i$j.254/24 lrp$i$j-attachment
 	    ovn-nbctl \
-            -- lport-add ls$i lrp$i$j-attachment \
+            -- lsp-add ls$i lrp$i$j-attachment \
 	        -- set Logical_Switch_Port lrp$i$j-attachment type=router \
                             options:router-port=lrp$i$j \
                             addresses='"00:00:00:00:ff:'$i$j'"'
@ -1346,7 +1351,7 @@ sleep 1
 # content has Ethernet destination DST and source SRC (each exactly 12 hex
 # digits) and Ethernet type ETHTYPE (4 hex digits).  The OUTPORTs (zero or
 # more) list the VIFs on which the packet should be received.  INPORT and the
-# OUTPORTs are specified as lport numbers, e.g. 123 for vif123.
+# OUTPORTs are specified as logical switch port numbers, e.g. 123 for vif123.
 trim_zeros() {
    sed 's/\(00\)\{1,\}$//'
 }
@ -1389,10 +1394,11 @@ as hv1 ovs-ofctl dump-flows br-int

 # Send IP packets between all pairs of source and destination ports:
 #
-# 1. Unicast IP packets are delivered to exactly one lport (except
-#    that packets destined to their input ports are dropped).
+# 1. Unicast IP packets are delivered to exactly one logical switch port
+#    (except that packets destined to their input ports are dropped).
 #
-# 2. Broadcast IP packets are delivered to all lports except the input port.
+# 2. Broadcast IP packets are delivered to all logical switch ports
+#    except the input port.
 ip_to_hex() {
    printf "%02x%02x%02x%02x" "$@"
 }
@ -1471,7 +1477,7 @@ done
 # it should be the hardware address of the target to expect to receive in an
 # ARP reply; otherwise no reply is expected.
 #
-# INPORT is an lport number, e.g. 11 for vif11.
+# INPORT is an logical switch port number, e.g. 11 for vif11.
 # SHA and REPLY_HA are each 12 hex digits.
 # SPA and TPA are each 8 hex digits.
 test_arp() {
@ -1676,16 +1682,16 @@ for i in 1 2 3; do

    for j in 1 2 3; do
        ovs-vsctl add-port br-int vif$i$j -- set Interface vif$i$j external-ids:iface-id=lp$i$j options:tx_pcap=hv$i/vif$i$j-tx.pcap options:rxq_pcap=hv$i/vif$i$j-rx.pcap ofport-request=$i$j
-        ovn-nbctl lport-add lsw0 lp$i$j
+        ovn-nbctl lsp-add lsw0 lp$i$j
        if test $j = 1; then
-            ovn-nbctl lport-set-addresses lp$i$j "f0:00:00:00:00:$i$j 192.168.0.$i$j" unknown
+            ovn-nbctl lsp-set-addresses lp$i$j "f0:00:00:00:00:$i$j 192.168.0.$i$j" unknown
        elif test $j = 2; then
-            ovn-nbctl lport-set-addresses lp$i$j "f0:00:00:00:00:$i$j 192.168.0.$i$j"
-            ovn-nbctl lport-set-port-security lp$i$j f0:00:00:00:00:$i$j
+            ovn-nbctl lsp-set-addresses lp$i$j "f0:00:00:00:00:$i$j 192.168.0.$i$j"
+            ovn-nbctl lsp-set-port-security lp$i$j f0:00:00:00:00:$i$j
        else
            extra_addr="f0:00:00:00:0$i:$i$j fe80::ea2a:eaff:fe28:$i$j"
-            ovn-nbctl lport-set-addresses lp$i$j "f0:00:00:00:00:$i$j 192.168.0.$i$j" "$extra_addr"
-            ovn-nbctl lport-set-port-security lp$i$j "f0:00:00:00:00:$i$j 192.168.0.$i$j" "$extra_addr"
+            ovn-nbctl lsp-set-addresses lp$i$j "f0:00:00:00:00:$i$j 192.168.0.$i$j" "$extra_addr"
+            ovn-nbctl lsp-set-port-security lp$i$j "f0:00:00:00:00:$i$j 192.168.0.$i$j" "$extra_addr"
        fi
    done
 done
@ -1721,8 +1727,8 @@ done
 # The packet's content has Ethernet destination DST and source SRC
 # (each exactly 12 hex digits) and Ethernet type ETHTYPE (4 hex digits).
 # The OUTPORTs (zero or more) list the VIFs on which the packet should
-# be received.  INPORT and the OUTPORTs are specified as lport numbers,
-# e.g. 11 for vif11.
+# be received.  INPORT and the OUTPORTs are specified as logical switch
+# port numbers, e.g. 11 for vif11.
 test_ip() {
    # This packet has bad checksums but logical L3 routing doesn't check.
    local inport=$1 src_mac=$2 dst_mac=$3 src_ip=$4 dst_ip=$5
@ -1743,7 +1749,7 @@ test_ip() {
 # it should be the hardware address of the target to expect to receive in an
 # ARP reply; otherwise no reply is expected.
 #
-# INPORT is an lport number, e.g. 11 for vif11.
+# INPORT is an logical switch port number, e.g. 11 for vif11.
 # SHA and REPLY_HA are each 12 hex digits.
 # SPA and TPA are each 8 hex digits.
 test_arp() {
@ -1954,56 +1960,56 @@ for i in 1 2 3; do
    test_ipv6 ${i}3 f00000000${i}${i}3 f00000000021 $sip $tip
 done

-# configure lport13 to send and received IPv4 packets with an address range
-ovn-nbctl lport-set-port-security lp13 "f0:00:00:00:00:13 192.168.0.13 20.0.0.4/24 10.0.0.0/24"
+# configure lsp13 to send and received IPv4 packets with an address range
+ovn-nbctl lsp-set-port-security lp13 "f0:00:00:00:00:13 192.168.0.13 20.0.0.4/24 10.0.0.0/24"

 sleep 2

 sip=`ip_to_hex 10 0 0 13`
 tip=`ip_to_hex 192 168 0 22`
-# arp packet with inner ip 10.0.0.13 should be allowed for lport13
+# arp packet with inner ip 10.0.0.13 should be allowed for lsp13
 test_arp 13 f00000000013 f00000000013 $sip $tip 0 f00000000022

 sip=`ip_to_hex 10 0 0 14`
 tip=`ip_to_hex 192 168 0 23`
-# IPv4 packet from lport13 with src ip 10.0.0.14 destined to lport23
+# IPv4 packet from lsp13 with src ip 10.0.0.14 destined to lsp23
 # with dst ip 192.168.0.23 should be allowed
 test_ip 13 f00000000013 f00000000023 $sip $tip 23

 sip=`ip_to_hex 192 168 0 33`
 tip=`ip_to_hex 10 0 0 15`
-# IPv4 packet from lport33 with src ip 192.168.0.33 destined to lport13
-# with dst ip 10.0.0.15 should be received by lport13
+# IPv4 packet from lsp33 with src ip 192.168.0.33 destined to lsp13
+# with dst ip 10.0.0.15 should be received by lsp13
 test_ip 33 f00000000033 f00000000013 $sip $tip 13

 sip=`ip_to_hex 192 168 0 33`
 tip=`ip_to_hex 20 0 0 4`
-# IPv4 packet from lport33 with src ip 192.168.0.33 destined to lport13
-# with dst ip 20.0.0.4 should be received by lport13
+# IPv4 packet from lsp33 with src ip 192.168.0.33 destined to lsp13
+# with dst ip 20.0.0.4 should be received by lsp13
 test_ip 33 f00000000033 f00000000013 $sip $tip 13

 sip=`ip_to_hex 192 168 0 33`
 tip=`ip_to_hex 20 0 0 5`
-# IPv4 packet from lport33 with src ip 192.168.0.33 destined to lport13
-# with dst ip 20.0.0.5 should not be received by lport13
+# IPv4 packet from lsp33 with src ip 192.168.0.33 destined to lsp13
+# with dst ip 20.0.0.5 should not be received by lsp13
 test_ip 33 f00000000033 f00000000013 $sip $tip

 sip=`ip_to_hex 192 168 0 33`
 tip=`ip_to_hex 20 0 0 255`
-# IPv4 packet from lport33 with src ip 192.168.0.33 destined to lport13
-# with dst ip 20.0.0.255 should be received by lport13
+# IPv4 packet from lsp33 with src ip 192.168.0.33 destined to lsp13
+# with dst ip 20.0.0.255 should be received by lsp13
 test_ip 33 f00000000033 f00000000013 $sip $tip 13

 sip=`ip_to_hex 192 168 0 33`
 tip=`ip_to_hex 192 168 0 255`
-# IPv4 packet from lport33 with src ip 192.168.0.33 destined to lport13
-# with dst ip 192.168.0.255 should not be received by lport13
+# IPv4 packet from lsp33 with src ip 192.168.0.33 destined to lsp13
+# with dst ip 192.168.0.255 should not be received by lsp13
 test_ip 33 f00000000033 f00000000013 $sip $tip

 sip=`ip_to_hex 192 168 0 33`
 tip=`ip_to_hex 224 0 0 4`
-# IPv4 packet from lport33 with src ip 192.168.0.33 destined to lport13
-# with dst ip 224.0.0.4  should be received by lport13
+# IPv4 packet from lsp33 with src ip 192.168.0.33 destined to lsp13
+# with dst ip 224.0.0.4  should be received by lsp13
 test_ip 33 f00000000033 f00000000013 $sip $tip 13

 # Allow some time for packet forwarding.
@ -2084,13 +2090,13 @@ ovn-nbctl lswitch-add ls2
 # Connect ls1 to R1
 ovn-nbctl lrp-add R1 ls1 00:00:00:01:02:03 192.168.1.1/24 rp-ls1

-ovn-nbctl lport-add ls1 rp-ls1 -- set Logical_Switch_Port rp-ls1 type=router \
+ovn-nbctl lsp-add ls1 rp-ls1 -- set Logical_Switch_Port rp-ls1 type=router \
  options:router-port=ls1 addresses=\"00:00:00:01:02:03\"

 # Connect ls2 to R2
 ovn-nbctl lrp-add R2 ls2 00:00:00:01:02:04 172.16.1.1/24 rp-ls2

-ovn-nbctl lport-add ls2 rp-ls2 -- set Logical_Switch_Port rp-ls2 type=router \
+ovn-nbctl lsp-add ls2 rp-ls2 -- set Logical_Switch_Port rp-ls2 type=router \
  options:router-port=ls2 addresses=\"00:00:00:01:02:04\"

 # Connect R1 to R2
@ -2101,12 +2107,12 @@ ovn-nbctl set Logical_Router R1 default_gw="20.0.0.2"
 ovn-nbctl set Logical_Router R2 default_gw="20.0.0.1"

 # Create logical port ls1-lp1 in ls1
-ovn-nbctl lport-add ls1 ls1-lp1 \
-- lport-set-addresses ls1-lp1 "f0:00:00:01:02:03 192.168.1.2"
+ovn-nbctl lsp-add ls1 ls1-lp1 \
+-- lsp-set-addresses ls1-lp1 "f0:00:00:01:02:03 192.168.1.2"

 # Create logical port ls2-lp1 in ls2
-ovn-nbctl lport-add ls2 ls2-lp1 \
-- lport-set-addresses ls2-lp1 "f0:00:00:01:02:04 172.16.1.2"
+ovn-nbctl lsp-add ls2 ls2-lp1 \
+-- lsp-set-addresses ls2-lp1 "f0:00:00:01:02:04 172.16.1.2"

 # Create two hypervisor and create OVS ports corresponding to logical ports.
 net_add n1
@ -2227,21 +2233,21 @@ ovn-nbctl lswitch-add ls2

 # Connect ls1 to R1
 ovn-nbctl lrp-add R1 ls1 00:00:00:01:02:03 192.168.1.1/24 rp-ls1
-ovn-nbctl lport-add ls1 rp-ls1 -- set Logical_Switch_Port rp-ls1 type=router \
+ovn-nbctl lsp-add ls1 rp-ls1 -- set Logical_Switch_Port rp-ls1 type=router \
          options:router-port=ls1 addresses=\"00:00:00:01:02:03\"

 # Connect ls2 to R1
 ovn-nbctl lrp-add R1 ls2 00:00:00:01:02:04 172.16.1.1/24 rp-ls2
-ovn-nbctl lport-add ls2 rp-ls2 -- set Logical_Switch_Port rp-ls2 type=router \
+ovn-nbctl lsp-add ls2 rp-ls2 -- set Logical_Switch_Port rp-ls2 type=router \
          options:router-port=ls2 addresses=\"00:00:00:01:02:04\"

 # Create logical port ls1-lp1 in ls1
-ovn-nbctl lport-add ls1 ls1-lp1 \
-- lport-set-addresses ls1-lp1 "f0:00:00:01:02:03 192.168.1.2"
+ovn-nbctl lsp-add ls1 ls1-lp1 \
+-- lsp-set-addresses ls1-lp1 "f0:00:00:01:02:03 192.168.1.2"

 # Create logical port ls2-lp1 in ls2
-ovn-nbctl lport-add ls2 ls2-lp1 \
-- lport-set-addresses ls2-lp1 "f0:00:00:01:02:04 172.16.1.2"
+ovn-nbctl lsp-add ls2 ls2-lp1 \
+-- lsp-set-addresses ls2-lp1 "f0:00:00:01:02:04 172.16.1.2"

 # Create one hypervisor and create OVS ports corresponding to logical ports.
 net_add n1
@ -2366,17 +2372,17 @@ ovn-nbctl lswitch-add bob

 # Connect foo to R1
 ovn-nbctl lrp-add R1 foo 00:00:00:01:02:03 192.168.1.1/24 rp-foo
-ovn-nbctl lport-add foo rp-foo -- set Logical_Switch_Port rp-foo type=router \
+ovn-nbctl lsp-add foo rp-foo -- set Logical_Switch_Port rp-foo type=router \
          options:router-port=foo addresses=\"00:00:00:01:02:03\"

 # Connect alice to R2
 ovn-nbctl lrp-add R2 alice 00:00:00:01:02:04 172.16.1.1/24 rp-alice
-ovn-nbctl lport-add alice rp-alice -- set Logical_Switch_Port rp-alice \
+ovn-nbctl lsp-add alice rp-alice -- set Logical_Switch_Port rp-alice \
          type=router options:router-port=alice addresses=\"00:00:00:01:02:04\"

 # Connect bob to R2
 ovn-nbctl lrp-add R2 bob 00:00:00:01:02:05 172.16.2.1/24 rp-bob
-ovn-nbctl lport-add bob rp-bob -- set Logical_Switch_Port rp-bob type=router \
+ovn-nbctl lsp-add bob rp-bob -- set Logical_Switch_Port rp-bob type=router \
          options:router-port=bob addresses=\"00:00:00:01:02:05\"

 # Connect R1 to R2
@ -2389,16 +2395,16 @@ ovn-nbctl lr-route-add R2 172.16.2.0/24 20.0.0.2 R1_R2
 ovn-nbctl lr-route-add R2 192.168.1.0/24 20.0.0.1

 # Create logical port foo1 in foo
-ovn-nbctl lport-add foo foo1 \
-- lport-set-addresses foo1 "f0:00:00:01:02:03 192.168.1.2"
+ovn-nbctl lsp-add foo foo1 \
+-- lsp-set-addresses foo1 "f0:00:00:01:02:03 192.168.1.2"

 # Create logical port alice1 in alice
-ovn-nbctl lport-add alice alice1 \
-- lport-set-addresses alice1 "f0:00:00:01:02:04 172.16.1.2"
+ovn-nbctl lsp-add alice alice1 \
+-- lsp-set-addresses alice1 "f0:00:00:01:02:04 172.16.1.2"

 # Create logical port bob1 in bob
-ovn-nbctl lport-add bob bob1 \
-- lport-set-addresses bob1 "f0:00:00:01:02:05 172.16.2.2"
+ovn-nbctl lsp-add bob bob1 \
+-- lsp-set-addresses bob1 "f0:00:00:01:02:05 172.16.2.2"

 # Create two hypervisor and create OVS ports corresponding to logical ports.
 net_add n1
@ -2542,15 +2548,15 @@ AT_CHECK([ovs-vsctl set Open_vSwitch . external-ids:ovn-bridge-mappings=physnet1
 AT_CHECK([ovs-vsctl add-port br-eth0 snoopvif -- set Interface snoopvif options:tx_pcap=hv/snoopvif-tx.pcap options:rxq_pcap=hv/snoopvif-rx.pcap])

 # Create a vif.
-AT_CHECK([ovn-nbctl lport-add lsw0 localvif1])
-AT_CHECK([ovn-nbctl lport-set-addresses localvif1 "f0:00:00:00:00:01 192.168.1.2"])
-AT_CHECK([ovn-nbctl lport-set-port-security localvif1 "f0:00:00:00:00:01"])
+AT_CHECK([ovn-nbctl lsp-add lsw0 localvif1])
+AT_CHECK([ovn-nbctl lsp-set-addresses localvif1 "f0:00:00:00:00:01 192.168.1.2"])
+AT_CHECK([ovn-nbctl lsp-set-port-security localvif1 "f0:00:00:00:00:01"])

 # Create a localnet port.
-AT_CHECK([ovn-nbctl lport-add lsw0 ln_port])
-AT_CHECK([ovn-nbctl lport-set-addresses ln_port unknown])
-AT_CHECK([ovn-nbctl lport-set-type ln_port localnet])
-AT_CHECK([ovn-nbctl lport-set-options ln_port network_name=physnet1])
+AT_CHECK([ovn-nbctl lsp-add lsw0 ln_port])
+AT_CHECK([ovn-nbctl lsp-set-addresses ln_port unknown])
+AT_CHECK([ovn-nbctl lsp-set-type ln_port localnet])
+AT_CHECK([ovn-nbctl lsp-set-options ln_port network_name=physnet1])

 AT_CHECK([ovs-vsctl add-port br-int localvif1 -- set Interface localvif1 external_ids:iface-id=localvif1])

@ -2567,7 +2573,7 @@ cat packets

 # Delete the localnet ports.
 AT_CHECK([ovs-vsctl del-port localvif1])
-AT_CHECK([ovn-nbctl lport-del ln_port])
+AT_CHECK([ovn-nbctl lsp-del ln_port])

 as hv
 OVS_APP_EXIT_AND_WAIT([ovn-controller])
@ -2611,32 +2617,32 @@ ovn-nbctl lswitch-add join

 # Connect foo to R1
 ovn-nbctl lrp-add R1 foo 00:00:01:01:02:03 192.168.1.1/24
-ovn-nbctl lport-add foo rp-foo -- set Logical_Switch_Port rp-foo type=router \
+ovn-nbctl lsp-add foo rp-foo -- set Logical_Switch_Port rp-foo type=router \
    options:router-port=foo addresses=\"00:00:01:01:02:03\"

 # Connect alice to R2
 ovn-nbctl lrp-add R2 alice 00:00:02:01:02:03 172.16.1.1/24
-ovn-nbctl lport-add alice rp-alice -- set Logical_Switch_Port rp-alice \
+ovn-nbctl lsp-add alice rp-alice -- set Logical_Switch_Port rp-alice \
    type=router options:router-port=alice addresses=\"00:00:02:01:02:03\"

 # Connect bob to R3
 ovn-nbctl lrp-add R3 bob 00:00:03:01:02:03 10.32.1.1/24
-ovn-nbctl lport-add bob rp-bob -- set Logical_Switch_Port rp-bob \
+ovn-nbctl lsp-add bob rp-bob -- set Logical_Switch_Port rp-bob \
    type=router options:router-port=bob addresses=\"00:00:03:01:02:03\"

 # Connect R1 to join
 ovn-nbctl lrp-add R1 R1_join 00:00:04:01:02:03 20.0.0.1/24
-ovn-nbctl lport-add join r1-join -- set Logical_Switch_Port r1-join \
+ovn-nbctl lsp-add join r1-join -- set Logical_Switch_Port r1-join \
    type=router options:router-port=R1_join addresses='"00:00:04:01:02:03"'

 # Connect R2 to join
 ovn-nbctl lrp-add R2 R2_join 00:00:04:01:02:04 20.0.0.2/24
-ovn-nbctl lport-add join r2-join -- set Logical_Switch_Port r2-join \
+ovn-nbctl lsp-add join r2-join -- set Logical_Switch_Port r2-join \
    type=router options:router-port=R2_join addresses='"00:00:04:01:02:04"'

 # Connect R3 to join
 ovn-nbctl lrp-add R3 R3_join 00:00:04:01:02:05 20.0.0.3/24
-ovn-nbctl lport-add join r3-join -- set Logical_Switch_Port r3-join \
+ovn-nbctl lsp-add join r3-join -- set Logical_Switch_Port r3-join \
    type=router options:router-port=R3_join addresses='"00:00:04:01:02:05"'

 #install static routes
@ -2650,16 +2656,16 @@ ovn-nbctl lr-route-add R3 192.168.1.0/24 20.0.0.1
 ovn-nbctl lr-route-add R3 172.16.1.0/24 20.0.0.2

 # Create logical port foo1 in foo
-ovn-nbctl lport-add foo foo1 \
-- lport-set-addresses foo1 "f0:00:00:01:02:03 192.168.1.2"
+ovn-nbctl lsp-add foo foo1 \
+-- lsp-set-addresses foo1 "f0:00:00:01:02:03 192.168.1.2"

 # Create logical port alice1 in alice
-ovn-nbctl lport-add alice alice1 \
-- lport-set-addresses alice1 "f0:00:00:01:02:04 172.16.1.2"
+ovn-nbctl lsp-add alice alice1 \
+-- lsp-set-addresses alice1 "f0:00:00:01:02:04 172.16.1.2"

 # Create logical port bob1 in bob
-ovn-nbctl lport-add bob bob1 \
-- lport-set-addresses bob1 "f0:00:00:01:02:05 10.32.1.2"
+ovn-nbctl lsp-add bob bob1 \
+-- lsp-set-addresses bob1 "f0:00:00:01:02:05 10.32.1.2"

 # Create two hypervisor and create OVS ports corresponding to logical ports.
 net_add n1
@ -2844,22 +2850,22 @@ ovn-nbctl lswitch-add join

 # Connect foo to R1
 ovn-nbctl lrp-add R1 foo 00:00:01:01:02:03 192.168.1.1/24
-ovn-nbctl lport-add foo rp-foo -- set Logical_Switch_Port rp-foo \
+ovn-nbctl lsp-add foo rp-foo -- set Logical_Switch_Port rp-foo \
    type=router options:router-port=foo addresses=\"00:00:01:01:02:03\"

 # Connect alice to R2
 ovn-nbctl lrp-add R2 alice 00:00:02:01:02:03 172.16.1.1/24
-ovn-nbctl lport-add alice rp-alice -- set Logical_Switch_Port rp-alice \
+ovn-nbctl lsp-add alice rp-alice -- set Logical_Switch_Port rp-alice \
    type=router options:router-port=alice addresses=\"00:00:02:01:02:03\"

 # Connect R1 to join
 ovn-nbctl lrp-add R1 R1_join 00:00:04:01:02:03 20.0.0.1/24
-ovn-nbctl lport-add join r1-join -- set Logical_Switch_Port r1-join \
+ovn-nbctl lsp-add join r1-join -- set Logical_Switch_Port r1-join \
    type=router options:router-port=R1_join addresses='"00:00:04:01:02:03"'

 # Connect R2 to join
 ovn-nbctl lrp-add R2 R2_join 00:00:04:01:02:04 20.0.0.2/24
-ovn-nbctl lport-add join r2-join -- set Logical_Switch_Port r2-join \
+ovn-nbctl lsp-add join r2-join -- set Logical_Switch_Port r2-join \
    type=router options:router-port=R2_join addresses='"00:00:04:01:02:04"'


@ -2873,12 +2879,12 @@ ip_prefix=192.168.1.0/24 nexthop=20.0.0.1 -- add Logical_Router \
 R2 static_routes @lrt

 # Create logical port foo1 in foo
-ovn-nbctl lport-add foo foo1 \
-- lport-set-addresses foo1 "f0:00:00:01:02:03 192.168.1.2"
+ovn-nbctl lsp-add foo foo1 \
+-- lsp-set-addresses foo1 "f0:00:00:01:02:03 192.168.1.2"

 # Create logical port alice1 in alice
-ovn-nbctl lport-add alice alice1 \
-- lport-set-addresses alice1 "f0:00:00:01:02:04 172.16.1.2"
+ovn-nbctl lsp-add alice alice1 \
+-- lsp-set-addresses alice1 "f0:00:00:01:02:04 172.16.1.2"


 # Allow some time for ovn-northd and ovn-controller to catch up.
@ -2979,21 +2985,21 @@ ovn-nbctl lswitch-add ls2

 # Connect ls1 to R1
 ovn-nbctl lrp-add R1 ls1 00:00:00:01:02:f1 192.168.1.1/24
-ovn-nbctl lport-add ls1 rp-ls1 -- set Logical_Switch_Port rp-ls1 \
+ovn-nbctl lsp-add ls1 rp-ls1 -- set Logical_Switch_Port rp-ls1 \
    type=router options:router-port=ls1 addresses=\"00:00:00:01:02:f1\"

 # Connect ls2 to R1
 ovn-nbctl lrp-add R1 ls2 00:00:00:01:02:f2 172.16.1.1/24
-ovn-nbctl lport-add ls2 rp-ls2 -- set Logical_Switch_Port rp-ls2 \
+ovn-nbctl lsp-add ls2 rp-ls2 -- set Logical_Switch_Port rp-ls2 \
    type=router options:router-port=ls2 addresses=\"00:00:00:01:02:f2\"

 # Create logical port ls1-lp1 in ls1
-ovn-nbctl lport-add ls1 ls1-lp1 \
-- lport-set-addresses ls1-lp1 "00:00:00:01:02:03 192.168.1.2"
+ovn-nbctl lsp-add ls1 ls1-lp1 \
+-- lsp-set-addresses ls1-lp1 "00:00:00:01:02:03 192.168.1.2"

 # Create logical port ls2-lp1 in ls2
-ovn-nbctl lport-add ls2 ls2-lp1 \
-- lport-set-addresses ls2-lp1 "00:00:00:01:02:04 172.16.1.2"
+ovn-nbctl lsp-add ls2 ls2-lp1 \
+-- lsp-set-addresses ls2-lp1 "00:00:00:01:02:04 172.16.1.2"

 # Create one hypervisor and create OVS ports corresponding to logical ports.
 net_add n1
--- a/tutorial/OVN-Tutorial.md
+++ b/tutorial/OVN-Tutorial.md
@ -65,9 +65,9 @@ You can use the `ovn-nbctl` utility to see an overview of the logical topology.

    $ ovn-nbctl show
    lswitch 78687d53-e037-4555-bcd3-f4f8eaf3f2aa (sw0)
-        lport sw0-port1
+        port sw0-port1
            addresses: 00:00:00:00:00:01
-        lport sw0-port2
+        port sw0-port2
            addresses: 00:00:00:00:00:02

 The `ovn-sbctl` utility can be used to see into the state stored in the
@ -238,14 +238,14 @@ View the logical topology with `ovn-nbctl`.

    $ ovn-nbctl show
    lswitch e3190dc2-89d1-44ed-9308-e7077de782b3 (sw0)
-        lport sw0-port1
+        port sw0-port1
            addresses: 00:00:00:00:00:01
-        lport sw0-port2
+        port sw0-port2
            addresses: 00:00:00:00:00:02
    lswitch c8ed4c5f-9733-43f6-93da-795b1aabacb1 (sw1)
-        lport sw1-port1
+        port sw1-port1
            addresses: 00:00:00:00:00:03
-        lport sw1-port2
+        port sw1-port2
            addresses: 00:00:00:00:00:04

 Physically, all ports reside on the same chassis.
@ -349,13 +349,13 @@ You can start by viewing the logical topology with `ovn-nbctl`.

    $ ovn-nbctl show
    lswitch b977dc03-79a5-41ba-9665-341a80e1abfd (sw0)
-        lport sw0-port1
+        port sw0-port1
            addresses: 00:00:00:00:00:01
-        lport sw0-port2
+        port sw0-port2
            addresses: 00:00:00:00:00:02
-        lport sw0-port4
+        port sw0-port4
            addresses: 00:00:00:00:00:04
-        lport sw0-port3
+        port sw0-port3
            addresses: 00:00:00:00:00:03

 Using `ovn-sbctl` to view the state of the system, we can see that there are two
@ -464,34 +464,34 @@ The logical topology from `ovn-nbctl` should look like this.

    $ ovn-nbctl show
        lswitch 5a652488-cfba-4f3e-929d-00010cdfde40 (provnet1-2)
-            lport provnet1-2-physnet1
+            port provnet1-2-physnet1
                addresses: unknown
-            lport provnet1-2-port1
+            port provnet1-2-port1
                addresses: 00:00:00:00:00:02
        lswitch 5829b60a-eda8-4d78-94f6-7017ff9efcf0 (provnet1-4)
-            lport provnet1-4-port1
+            port provnet1-4-port1
                addresses: 00:00:00:00:00:04
-            lport provnet1-4-physnet1
+            port provnet1-4-physnet1
                addresses: unknown
        lswitch 06cbbcb6-38e3-418d-a81e-634ec9b54ad6 (provnet1-1)
-            lport provnet1-1-port1
+            port provnet1-1-port1
                addresses: 00:00:00:00:00:01
-            lport provnet1-1-physnet1
+            port provnet1-1-physnet1
                addresses: unknown
        lswitch 9cba3b3b-59ae-4175-95f5-b6f1cd9c2afb (provnet1-3)
-            lport provnet1-3-physnet1
+            port provnet1-3-physnet1
                addresses: unknown
-            lport provnet1-3-port1
+            port provnet1-3-port1
                addresses: 00:00:00:00:00:03

 `port1` on each logical switch represents a regular logical port for a VIF on a
 hypervisor.  `physnet1` on each logical switch is the special `localnet` port.
 You can use `ovn-nbctl` to see that this port has a `type` and `options` set.

-    $ ovn-nbctl lport-get-type provnet1-1-physnet1
+    $ ovn-nbctl lsp-get-type provnet1-1-physnet1
    localnet

-    $ ovn-nbctl lport-get-options provnet1-1-physnet1
+    $ ovn-nbctl lsp-get-options provnet1-1-physnet1
    network_name=physnet1

 The physical topology should reflect that there are two regular ports on each
@ -617,47 +617,47 @@ set to `101`.

    $ ovn-nbctl show
        lswitch 12ea93d0-694b-48e9-adef-d0ddd3ec4ac9 (provnet1-7-101)
-            lport provnet1-7-physnet1-101
+            port provnet1-7-physnet1-101
                parent: , tag:101
                addresses: unknown
-            lport provnet1-7-101-port1
+            port provnet1-7-101-port1
                addresses: 00:00:00:00:00:07
        lswitch c9a5ce3a-15ec-48ea-a898-416013463589 (provnet1-4)
-            lport provnet1-4-port1
+            port provnet1-4-port1
                addresses: 00:00:00:00:00:04
-            lport provnet1-4-physnet1
+            port provnet1-4-physnet1
                addresses: unknown
        lswitch e07d4f7a-2085-4fbb-9937-d6192b79a397 (provnet1-1)
-            lport provnet1-1-physnet1
+            port provnet1-1-physnet1
                addresses: unknown
-            lport provnet1-1-port1
+            port provnet1-1-port1
                addresses: 00:00:00:00:00:01
        lswitch 6c098474-0509-4219-bc9b-eb4e28dd1aeb (provnet1-2)
-            lport provnet1-2-physnet1
+            port provnet1-2-physnet1
                addresses: unknown
-            lport provnet1-2-port1
+            port provnet1-2-port1
                addresses: 00:00:00:00:00:02
        lswitch 723c4684-5d58-4202-b8e3-4ba99ad5ed9e (provnet1-8-101)
-            lport provnet1-8-101-port1
+            port provnet1-8-101-port1
                addresses: 00:00:00:00:00:08
-            lport provnet1-8-physnet1-101
+            port provnet1-8-physnet1-101
                parent: , tag:101
                addresses: unknown
        lswitch 8444e925-ceb2-4b02-ac20-eb2e4cfb954d (provnet1-6-101)
-            lport provnet1-6-physnet1-101
+            port provnet1-6-physnet1-101
                parent: , tag:101
                addresses: unknown
-            lport provnet1-6-101-port1
+            port provnet1-6-101-port1
                addresses: 00:00:00:00:00:06
        lswitch e11e5605-7c46-4395-b28d-cff57451fc7e (provnet1-3)
-            lport provnet1-3-port1
+            port provnet1-3-port1
                addresses: 00:00:00:00:00:03
-            lport provnet1-3-physnet1
+            port provnet1-3-physnet1
                addresses: unknown
        lswitch 0706b697-6c92-4d54-bc0a-db5bababb74a (provnet1-5-101)
-            lport provnet1-5-101-port1
+            port provnet1-5-101-port1
                addresses: 00:00:00:00:00:05
-            lport provnet1-5-physnet1-101
+            port provnet1-5-physnet1-101
                parent: , tag:101
                addresses: unknown

--- a/tutorial/ovn/env1/add-third-port.sh
+++ b/tutorial/ovn/env1/add-third-port.sh
@ -15,7 +15,7 @@

 set -o xtrace

-ovn-nbctl lport-add sw0 sw0-port3
-ovn-nbctl lport-set-addresses sw0-port3 00:00:00:00:00:03
-ovn-nbctl lport-set-port-security sw0-port3 00:00:00:00:00:03
+ovn-nbctl lsp-add sw0 sw0-port3
+ovn-nbctl lsp-set-addresses sw0-port3 00:00:00:00:00:03
+ovn-nbctl lsp-set-port-security sw0-port3 00:00:00:00:00:03
 ovs-vsctl add-port br-int lport3 -- set Interface lport3 external_ids:iface-id=sw0-port3
--- a/tutorial/ovn/env1/setup.sh
+++ b/tutorial/ovn/env1/setup.sh
@ -23,18 +23,18 @@ set -o xtrace
 ovn-nbctl lswitch-add sw0

 # Create two logical ports on "sw0".
-ovn-nbctl lport-add sw0 sw0-port1
-ovn-nbctl lport-add sw0 sw0-port2
+ovn-nbctl lsp-add sw0 sw0-port1
+ovn-nbctl lsp-add sw0 sw0-port2

 # Set a MAC address for each of the two logical ports.
-ovn-nbctl lport-set-addresses sw0-port1 00:00:00:00:00:01
-ovn-nbctl lport-set-addresses sw0-port2 00:00:00:00:00:02
+ovn-nbctl lsp-set-addresses sw0-port1 00:00:00:00:00:01
+ovn-nbctl lsp-set-addresses sw0-port2 00:00:00:00:00:02

 # Set up port security for the two logical ports.  This ensures that
 # the logical port mac address we have configured is the only allowed
 # source and destination mac address for these ports.
-ovn-nbctl lport-set-port-security sw0-port1 00:00:00:00:00:01
-ovn-nbctl lport-set-port-security sw0-port2 00:00:00:00:00:02
+ovn-nbctl lsp-set-port-security sw0-port1 00:00:00:00:00:01
+ovn-nbctl lsp-set-port-security sw0-port2 00:00:00:00:00:02

 # Create ports on the local OVS bridge, br-int.  When ovn-controller
 # sees these ports show up with an "iface-id" that matches the OVN
--- a/tutorial/ovn/env2/setup.sh
+++ b/tutorial/ovn/env2/setup.sh
@ -17,18 +17,18 @@ set -o xtrace

 ovn-nbctl lswitch-add sw0
 ovn-nbctl lswitch-add sw1
-ovn-nbctl lport-add sw0 sw0-port1 
-ovn-nbctl lport-add sw0 sw0-port2 
-ovn-nbctl lport-add sw1 sw1-port1 
-ovn-nbctl lport-add sw1 sw1-port2 
-ovn-nbctl lport-set-addresses sw0-port1 00:00:00:00:00:01
-ovn-nbctl lport-set-addresses sw0-port2 00:00:00:00:00:02
-ovn-nbctl lport-set-addresses sw1-port1 00:00:00:00:00:03
-ovn-nbctl lport-set-addresses sw1-port2 00:00:00:00:00:04
-ovn-nbctl lport-set-port-security sw0-port1 00:00:00:00:00:01
-ovn-nbctl lport-set-port-security sw0-port2 00:00:00:00:00:02
-ovn-nbctl lport-set-port-security sw1-port1 00:00:00:00:00:03
-ovn-nbctl lport-set-port-security sw1-port2 00:00:00:00:00:04
+ovn-nbctl lsp-add sw0 sw0-port1
+ovn-nbctl lsp-add sw0 sw0-port2
+ovn-nbctl lsp-add sw1 sw1-port1
+ovn-nbctl lsp-add sw1 sw1-port2
+ovn-nbctl lsp-set-addresses sw0-port1 00:00:00:00:00:01
+ovn-nbctl lsp-set-addresses sw0-port2 00:00:00:00:00:02
+ovn-nbctl lsp-set-addresses sw1-port1 00:00:00:00:00:03
+ovn-nbctl lsp-set-addresses sw1-port2 00:00:00:00:00:04
+ovn-nbctl lsp-set-port-security sw0-port1 00:00:00:00:00:01
+ovn-nbctl lsp-set-port-security sw0-port2 00:00:00:00:00:02
+ovn-nbctl lsp-set-port-security sw1-port1 00:00:00:00:00:03
+ovn-nbctl lsp-set-port-security sw1-port2 00:00:00:00:00:04

 ovs-vsctl add-port br-int lport1 -- set Interface lport1 external_ids:iface-id=sw0-port1
 ovs-vsctl add-port br-int lport2 -- set Interface lport2 external_ids:iface-id=sw0-port2
--- a/tutorial/ovn/env3/setup.sh
+++ b/tutorial/ovn/env3/setup.sh
@ -17,20 +17,20 @@ set -o xtrace

 ovn-nbctl lswitch-add sw0

-ovn-nbctl lport-add sw0 sw0-port1
-ovn-nbctl lport-add sw0 sw0-port2
-ovn-nbctl lport-add sw0 sw0-port3
-ovn-nbctl lport-add sw0 sw0-port4
+ovn-nbctl lsp-add sw0 sw0-port1
+ovn-nbctl lsp-add sw0 sw0-port2
+ovn-nbctl lsp-add sw0 sw0-port3
+ovn-nbctl lsp-add sw0 sw0-port4

-ovn-nbctl lport-set-addresses sw0-port1 00:00:00:00:00:01
-ovn-nbctl lport-set-addresses sw0-port2 00:00:00:00:00:02
-ovn-nbctl lport-set-addresses sw0-port3 00:00:00:00:00:03
-ovn-nbctl lport-set-addresses sw0-port4 00:00:00:00:00:04
+ovn-nbctl lsp-set-addresses sw0-port1 00:00:00:00:00:01
+ovn-nbctl lsp-set-addresses sw0-port2 00:00:00:00:00:02
+ovn-nbctl lsp-set-addresses sw0-port3 00:00:00:00:00:03
+ovn-nbctl lsp-set-addresses sw0-port4 00:00:00:00:00:04

-ovn-nbctl lport-set-port-security sw0-port1 00:00:00:00:00:01
-ovn-nbctl lport-set-port-security sw0-port2 00:00:00:00:00:02
-ovn-nbctl lport-set-port-security sw0-port3 00:00:00:00:00:03
-ovn-nbctl lport-set-port-security sw0-port4 00:00:00:00:00:04
+ovn-nbctl lsp-set-port-security sw0-port1 00:00:00:00:00:01
+ovn-nbctl lsp-set-port-security sw0-port2 00:00:00:00:00:02
+ovn-nbctl lsp-set-port-security sw0-port3 00:00:00:00:00:03
+ovn-nbctl lsp-set-port-security sw0-port4 00:00:00:00:00:04

 # Bind sw0-port1 and sw0-port2 to the local chassis
 ovs-vsctl add-port br-int lport1 -- set Interface lport1 external_ids:iface-id=sw0-port1
--- a/tutorial/ovn/env4/setup2.sh
+++ b/tutorial/ovn/env4/setup2.sh
@ -30,14 +30,14 @@ ovn-sbctl chassis-add fakechassis geneve 127.0.0.1
 for n in 1 2 3 4; do
    ovn-nbctl lswitch-add provnet1-$n

-    ovn-nbctl lport-add provnet1-$n provnet1-$n-port1
-    ovn-nbctl lport-set-addresses provnet1-$n-port1 00:00:00:00:00:0$n
-    ovn-nbctl lport-set-port-security provnet1-$n-port1 00:00:00:00:00:0$n
+    ovn-nbctl lsp-add provnet1-$n provnet1-$n-port1
+    ovn-nbctl lsp-set-addresses provnet1-$n-port1 00:00:00:00:00:0$n
+    ovn-nbctl lsp-set-port-security provnet1-$n-port1 00:00:00:00:00:0$n

-    ovn-nbctl lport-add provnet1-$n provnet1-$n-physnet1
-    ovn-nbctl lport-set-addresses provnet1-$n-physnet1 unknown
-    ovn-nbctl lport-set-type provnet1-$n-physnet1 localnet
-    ovn-nbctl lport-set-options provnet1-$n-physnet1 network_name=physnet1
+    ovn-nbctl lsp-add provnet1-$n provnet1-$n-physnet1
+    ovn-nbctl lsp-set-addresses provnet1-$n-physnet1 unknown
+    ovn-nbctl lsp-set-type provnet1-$n-physnet1 localnet
+    ovn-nbctl lsp-set-options provnet1-$n-physnet1 network_name=physnet1
 done

 ovs-vsctl add-port br-int lport1 -- set Interface lport1 external_ids:iface-id=provnet1-1-port1
--- a/tutorial/ovn/env5/setup.sh
+++ b/tutorial/ovn/env5/setup.sh
@ -33,27 +33,27 @@ ovn-sbctl chassis-add fakechassis geneve 127.0.0.1
 for n in 1 2 3 4 5 6 7 8; do
    if [ $n -gt 4 ] ; then
        lswitch_name="provnet1-$n-101"
-        lport_name="$lswitch_name-port1"
+        lsp_name="$lswitch_name-port1"
    else
        lswitch_name="provnet1-$n"
    fi
    ovn-nbctl lswitch-add $lswitch_name

-    lport_name="$lswitch_name-port1"
-    ovn-nbctl lport-add $lswitch_name $lport_name
-    ovn-nbctl lport-set-addresses $lport_name 00:00:00:00:00:0$n
-    ovn-nbctl lport-set-port-security $lport_name 00:00:00:00:00:0$n
+    lsp_name="$lswitch_name-port1"
+    ovn-nbctl lsp-add $lswitch_name $lsp_name
+    ovn-nbctl lsp-set-addresses $lsp_name 00:00:00:00:00:0$n
+    ovn-nbctl lsp-set-port-security $lsp_name 00:00:00:00:00:0$n

    if [ $n -gt 4 ] ; then
-        lport_name="provnet1-$n-physnet1-101"
-        ovn-nbctl lport-add $lswitch_name $lport_name "" 101
+        lsp_name="provnet1-$n-physnet1-101"
+        ovn-nbctl lsp-add $lswitch_name $lsp_name "" 101
    else
-        lport_name="provnet1-$n-physnet1"
-        ovn-nbctl lport-add $lswitch_name $lport_name
+        lsp_name="provnet1-$n-physnet1"
+        ovn-nbctl lsp-add $lswitch_name $lsp_name
    fi
-    ovn-nbctl lport-set-addresses $lport_name unknown
-    ovn-nbctl lport-set-type $lport_name localnet
-    ovn-nbctl lport-set-options $lport_name network_name=physnet1
+    ovn-nbctl lsp-set-addresses $lsp_name unknown
+    ovn-nbctl lsp-set-type $lsp_name localnet
+    ovn-nbctl lsp-set-options $lsp_name network_name=physnet1
 done

 ovs-vsctl add-port br-int lport1 -- set Interface lport1 external_ids:iface-id=provnet1-1-port1
--- a/tutorial/ovn/env6/setup.sh
+++ b/tutorial/ovn/env6/setup.sh
@ -23,18 +23,18 @@ set -o xtrace
 ovn-nbctl lswitch-add sw0

 # Create two logical ports on "sw0".
-ovn-nbctl lport-add sw0 sw0-port1
-ovn-nbctl lport-add sw0 sw0-port2
+ovn-nbctl lsp-add sw0 sw0-port1
+ovn-nbctl lsp-add sw0 sw0-port2

 # Set a MAC address for each of the two logical ports.
-ovn-nbctl lport-set-addresses sw0-port1 00:00:00:00:00:01
-ovn-nbctl lport-set-addresses sw0-port2 00:00:00:00:00:02
+ovn-nbctl lsp-set-addresses sw0-port1 00:00:00:00:00:01
+ovn-nbctl lsp-set-addresses sw0-port2 00:00:00:00:00:02

 # Set up port security for the two logical ports.  This ensures that
 # the logical port mac address we have configured is the only allowed
 # source and destination mac address for these ports.
-ovn-nbctl lport-set-port-security sw0-port1 00:00:00:00:00:01
-ovn-nbctl lport-set-port-security sw0-port2 00:00:00:00:00:02
+ovn-nbctl lsp-set-port-security sw0-port1 00:00:00:00:00:01
+ovn-nbctl lsp-set-port-security sw0-port2 00:00:00:00:00:02

 # Create ports on the local OVS bridge, br-int.  When ovn-controller
 # sees these ports show up with an "iface-id" that matches the OVN
--- a/tutorial/ovn/env7/add-container-ports.sh
+++ b/tutorial/ovn/env7/add-container-ports.sh
@ -19,14 +19,14 @@ set -o xtrace
 ovn-nbctl lswitch-add csw0

 # create a container port with parent set to sw0-port1
-ovn-nbctl lport-add csw0 csw0-cport1 sw0-port1 42
-ovn-nbctl lport-set-addresses csw0-cport1 00:00:00:00:01:01
-ovn-nbctl lport-set-port-security csw0-cport1 00:00:00:00:01:01
+ovn-nbctl lsp-add csw0 csw0-cport1 sw0-port1 42
+ovn-nbctl lsp-set-addresses csw0-cport1 00:00:00:00:01:01
+ovn-nbctl lsp-set-port-security csw0-cport1 00:00:00:00:01:01

 # create another container port with parent set to sw0-port1
-ovn-nbctl lport-add csw0 csw0-cport2 sw0-port2 43
-ovn-nbctl lport-set-addresses csw0-cport2 00:00:00:00:01:02
-ovn-nbctl lport-set-port-security csw0-cport2 00:00:00:00:01:02
+ovn-nbctl lsp-add csw0 csw0-cport2 sw0-port2 43
+ovn-nbctl lsp-set-addresses csw0-cport2 00:00:00:00:01:02
+ovn-nbctl lsp-set-port-security csw0-cport2 00:00:00:00:01:02


 # Make lport1 as a patch port, other end connected to br-vmport1
--- a/tutorial/ovn/env7/setup.sh
+++ b/tutorial/ovn/env7/setup.sh
@ -19,17 +19,17 @@ set -o xtrace
 ovn-nbctl lswitch-add sw0

 # Create two logical ports on "sw0".
-ovn-nbctl lport-add sw0 sw0-port1
-ovn-nbctl lport-add sw0 sw0-port2
-ovn-nbctl lport-add sw0 sw0-port3
+ovn-nbctl lsp-add sw0 sw0-port1
+ovn-nbctl lsp-add sw0 sw0-port2
+ovn-nbctl lsp-add sw0 sw0-port3

-ovn-nbctl lport-set-addresses sw0-port1 00:00:00:00:00:01
-ovn-nbctl lport-set-addresses sw0-port2 00:00:00:00:00:02
-ovn-nbctl lport-set-addresses sw0-port3 00:00:00:00:00:03
+ovn-nbctl lsp-set-addresses sw0-port1 00:00:00:00:00:01
+ovn-nbctl lsp-set-addresses sw0-port2 00:00:00:00:00:02
+ovn-nbctl lsp-set-addresses sw0-port3 00:00:00:00:00:03

-ovn-nbctl lport-set-port-security sw0-port1 00:00:00:00:00:01
-ovn-nbctl lport-set-port-security sw0-port2 00:00:00:00:00:02
-ovn-nbctl lport-set-port-security sw0-port3 00:00:00:00:00:03
+ovn-nbctl lsp-set-port-security sw0-port1 00:00:00:00:00:01
+ovn-nbctl lsp-set-port-security sw0-port2 00:00:00:00:00:02
+ovn-nbctl lsp-set-port-security sw0-port3 00:00:00:00:00:03

 ovs-vsctl add-port br-int lport1 -- set Interface lport1 external_ids:iface-id=sw0-port1
 ovs-vsctl add-port br-int lport2 -- set Interface lport2 external_ids:iface-id=sw0-port2
--- a/utilities/ovs-sim.1.xml
+++ b/utilities/ovs-sim.1.xml
@ -275,8 +275,8 @@ for i in 0 1; do
    ovs-vsctl add-br br-phys
    ovn_attach n1 br-phys 192.168.0.`expr $i + 1`
    ovs-vsctl add-port br-int vif$i -- set Interface vif$i external-ids:iface-id=lp$i
-    ovn-nbctl lport-add lsw0 lp$i
-    ovn-nbctl lport-set-addresses lp$i f0:00:00:00:00:0$i
+    ovn-nbctl lsp-add lsw0 lp$i
+    ovn-nbctl lsp-set-addresses lp$i f0:00:00:00:00:0$i
 done
    </pre>
    
@ -306,8 +306,8 @@ wait
 for i in `seq $n`; do
    yy=$(printf %02x $(expr $i / 256))
    xx=$(printf $02x $(expr $i % 256))
-    ovn-nbctl lport-add br0 lp$i
-    ovn-nbctl lport-set-addresses lp$i f0:00:00:00:$yy:$xx
+    ovn-nbctl lsp-add br0 lp$i
+    ovn-nbctl lsp-set-addresses lp$i f0:00:00:00:$yy:$xx
 done
    </pre>

@ -317,7 +317,7 @@ done
    </p>

    <pre>
-watch 'for i in `seq $n`; do if test `ovn-nbctl lport-get-up lp$i` != up; then echo $i; fi; done'
+watch 'for i in `seq $n`; do if test `ovn-nbctl lsp-get-up lp$i` != up; then echo $i; fi; done'
    </pre>

 </manpage>