Address pointed by bundle could be obsolete/free'd when
realloc, called from ofpbuf_put_zero(), returns new address.
Reported by Valgrind 367: ovs-ofctl parse-flows (NXM)
Invalid write of size 4
bundle_parse__ (bundle.c:200)
bundle_parse_load (bundle.c:272)
parse_bundle_load (ofp-actions.c:1324)
ofpacts_parse__ (ofp-actions.c:7484)
ofpacts_parse (ofp-actions.c:7540)
ofpacts_parse_copy (ofp-actions.c:7558)
parse_ofp_str__ (ofp-parse.c:491)
parse_ofp_str (ofp-parse.c:544)
parse_ofp_flow_mod_str (ofp-parse.c:870)
Address 0x7a4e96c is 12 bytes inside a block of size 64 free'd
free (vg_replace_malloc.c:530)
ofpbuf_resize__ (ofpbuf.c:246) (purposely add to force using new buf)
ofpbuf_put_zeros (ofpbuf.c:375)
bundle_parse__ (bundle.c:181)
bundle_parse_load (bundle.c:272)
parse_bundle_load (ofp-actions.c:1324)
ofpacts_parse__ (ofp-actions.c:7484)
ofpacts_parse (ofp-actions.c:7540)
ofpacts_parse_copy (ofp-actions.c:7558)
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: Joe Stringer <joe@ovn.org>
It does more than just update the length now, so this is a more accurate
name.
Signed-off-by: Ben Pfaff <blp@ovn.org>
Acked-by: Russell Bryant <russell@ovn.org>
This is implied by the list of ports that are valid for output in the
various versions of the OpenFlow specification.
Found by OFTest.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Flavio Leitner <fbl@sysclose.org>
ofpbuf was complicated due to its wide usage across all
layers of OVS, Now we have introduced independent dp_packet
which can be used for datapath packet, we can simplify ofpbuf.
Following patch removes DPDK mbuf and access API of ofpbuf
members.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Jarno Rajahalme <jrajahalme@nicira.com>
Acked-by: Ben Pfaff <blp@nicira.com>
A new function vlog_insert_module() is introduced to avoid using
list_insert() from the vlog.h header.
Signed-off-by: Thomas Graf <tgraf@noironetworks.com>
Acked-by: Ben Pfaff <blp@nicira.com>
The following macros are renamed to avoid conflicts with other headers:
* WARN_UNUSED_RESULT to OVS_WARN_UNUSED_RESULT
* PRINTF_FORMAT to OVS_PRINTF_FORMAT
* NO_RETURN to OVS_NO_RETURN
Signed-off-by: Thomas Graf <tgraf@noironetworks.com>
Acked-by: Ben Pfaff <blp@nicira.com>
Some of the Nicira extension actions include fixed-size 32-bit members that
designate NXM fields. These actions can't accommodate 64-bit experimenter
OXMs, so we need to figure out some kind of solution. This commit does
that, in different ways for different actions.
For some actions, I did not think it was worthwhile to worry about
experimenter OXM, so I just disabled use of them. This is what I did for
bundle, learn, and multipath actions.
Other actions could be gracefully reinterpreted to support experimenter
OXM. This is true of reg_move, which use NXM headers only at the end of
the action and such that using an experimenter OXM would make the action
longer (which unambigously signals to older OVS that the action is an
error, which is desired behavior since older OVS cannot interpret this
action). The stack push and pop actions are also in this category.
reg_load was the most frustrating case. In OpenFlow 1.5 we had already
eliminated this action in favor of OF1.5+ set_field. In other OpenFlow
versions, though, reg_load is more powerful than set_field because it
can modify partial fields. This commit therefore adds a new variant of
reg_load, called reg_load2, which is simply OF1.5+ set_field with a Nicira
extension header on it.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Jarno Rajahalme <jrajahalme@nicira.com>
Until now, knowledge about OpenFlow has been somewhat scattered around the
tree. Some of it is in ofp-actions, some of it is in ofp-util, some in
separate files for individual actions, and most of the wire format
declarations are in include/openflow. This commit centralizes all of that
in ofp-actions.
Encoding and decoding OpenFlow actions was previously broken up by OpenFlow
version. This was OK with only OpenFlow 1.0 and 1.1, but each additional
version added a new wrapper around the existing ones, which started to
become hard to understand. This commit merges all of the processing for
the different versions, to the extent that they are similar, making the
version differences clearer.
Previously, ofp-actions contained OpenFlow encoding and decoding, plus
ofpact formatting, but OpenFlow parsing was separated into ofp-parse, which
seems an odd division. This commit moves the parsing code into ofp-actions
with the rest of the code.
Before this commit, the four main bits of code associated with a particular
ofpact--OpenFlow encoding and decoding, ofpact formatting and parsing--were
all found far away from each other. This often made it hard to see what
was going on for a particular ofpact, since you had to search around to
many different pieces of code. This commit reorganizes so that all of the
code for a given ofpact is in a single place.
As a code refactoring, this commit has little visible behavioral change.
The update to ofproto-dpif.at illustrates one minor bug fix as a side
effect: a flow that was added with the action "dec_ttl" (a standard
OpenFlow action) was previously formatted as "dec_ttl(0)" (using a Nicira
extension to specifically direct packets bounced to the controller because
of too-low TTL), but after this commit it is correctly formatted as
"dec_ttl".
The other visible effect is to drop support for the Nicira extension
dec_ttl action in OpenFlow 1.1 and later in favor of the equivalent
standard action. It seems unlikely that anyone was really using the
Nicira extension in OF1.1 or later.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Jarno Rajahalme <jrajahalme@nicira.com>
Rename 'l2' to 'frame' and add new ofpbuf_set_frame() and ofpbuf_l2().
ofpbuf_set_frame() alse resets all the layer offsets. ofpbuf_l2()
returns NULL if the packet has no Ethernet header, as indicated either
by unset l3 offset or NULL frame pointer. Callers of ofpbuf_l2() are
supposed to check the return value, unless they can otherwise be sure
that the packet has a valid Ethernet header.
The recent commit 437d0d22 made some assumptions that were not valid
regarding the use of the 'l2' pointer in rconn module and by
compose_rarp(). This is now fixed as follows: rconn now relies on the
fact that once OpenFlow messages are given to rconn for transport, the
frame pointer is no longer needed to refer to the OpenFlow header; and
compose_rarp() now sets the frame pointer and offsets as expected.
In addition to storing network frames, ofpbufs are also used for
handling OpenFlow messages and action lists. lib/ofpbuf.h now has a
comment documenting the current usage conventions and invariants.
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
This allows other libraries to use util.h that has already
defined NOT_REACHED.
Signed-off-by: Harold Lim <haroldl@vmware.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
The MSVC C library printf() implementation does not support the 'z', 't',
'j', or 'hh' format specifiers. This commit changes the Open vSwitch code
to avoid those format specifiers, switching to standard macros from
<inttypes.h> where available and inventing new macros resembling them
where necessary. It also updates CodingStyle to specify the macros' use
and adds a Makefile rule to report violations.
Signed-off-by: Alin Serdean <aserdean@cloudbasesolutions.com>
Co-authored-by: Ben Pfaff <blp@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
This function is related to actions to ofp-actions seems like a logical
place for it.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Jarno Rajahalme <jrajahalme@nicira.com>
Until now, failure to parse a flow in the ofp-parse module has caused the
program to abort immediately with a fatal error. This makes it hard to
use these functions from any long-lived program. This commit fixes the
problem.
Signed-off-by: Ben Pfaff <blp@nicira.com>
When determining the fields to un-wildcard, we need to be careful
about only un-wildcarding fields that are relevant. Also, we
didn't properly handle IPv6 addresses.
Signed-off-by: Justin Pettit <jpettit@nicira.com>
Acked-by: Ethan Jackson <ethan@nicira.com>
Until now, datapath ports and openflow ports were both represented by
unsigned integers of various sizes. With implicit conversions, etc., it is
easy to mix them up and use one where the other is expected. This commit
creates two typedefs, ofp_port_t and odp_port_t. Both of these two types
are marked by "__attribute__((bitwise))" so that sparse can be used to
detect any misuse.
Signed-off-by: Alex Wang <alexw@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Dynamically determines the flow fields that were relevant in
processing flows based on the OpenFlow flow table and switch
configuration. The immediate use for this functionality is to
cache action translations for similar flows in facets. This yields
a roughly 80% improvement in flow set up rates for a complicated
flow table.
More importantly, these wildcards will be used to determine what to
wildcard for the forthcoming kernel wildcard (megaflow) patches
that will allow wildcarding in the kernel, which will provide
significant flow set up improvements.
The approach to tracking fields and caching action translations in
facets was based on an impressive prototype by Ethan Jackson.
Co-authored-by: Ethan Jackson <ethan@nicira.com>
Signed-off-by: Ethan Jackson <ethan@nicira.com>
Signed-off-by: Justin Pettit <jpettit@nicira.com>
When I wrote this function I didn't think that port 0 was important (it's
not a valid OpenFlow port number) so I used a return value of 0 to indicate
an error. However, my assumption turns out to be wrong, so this commit
changes the interface to use the return value only for error reporting
and store the parsed port number into a pointer passed in as a parameter.
This commit doesn't change the behavior of ofputil_port_from_string().
Signed-off-by: Ben Pfaff <blp@nicira.com>
OpenFlow 1.0 has special reserved ports in the range 0xfff8 to 0xffff.
OpenFlow 1.1 and later has the same ports in the range 0xfffffff8 to
0xffffffff and allows the OF1.0 range to be used for ordinary ("physical")
switch ports. This means that, naively, the meaning of a port number in
the range 0xfff8 to 0xffff given on the ovs-ofctl command line depends on
the protocol in use. This commit implements something a little smarter:
- Accept keyword names (e.g. LOCAL) for special reserved ports
everywhere that such a port can plausibly be used (previously they
were only accepted in some places).
- Translate 0xfff8...0xffff to 0xfffffff8...0xffffffff for now, since
OF1.1+ isn't in widespread use and those particular ports aren't
likely to be in use in OF1.1+ anyway.
- Log warnings about those ports when they are specified by number, to
allow users to fix their invocations.
Also:
- Accept the OF1.1+ port numbers for these ports, without warning, for
compatibility with the upcoming OF1.1+ support.
- Stop accepting port number 0, which has never been a valid port
number in OpenFlow 1.0 and later. (This required fixing some tests
that inadvertently used this port number).
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Simon Horman <horms@verge.net.au>
The size of each slave is a uint16_t. This means that each slave needs 2 bytes
at the end of nx_action_bundle. Earlier, the size of each slave was not being
factored in when allocating space. This commit corrects that by allocating 2
bytes for each slave when calculating the total number of bytes to be allocated
at the end of nx_action_bundle.
Signed-off-by: Mehak Mahajan <mmahajan@nicira.com>
OpenFlow actions have always been somewhat awkward to handle.
Moreover, over time we've started creating actions that require more
complicated parsing. When we maintain those actions internally in
their wire format, we end up parsing them multiple times, whenever
we have to look at the set of actions.
When we add support for OpenFlow 1.1 or later protocols, the situation
will get worse, because these newer protocols support many of the same
actions but with different representations. It becomes unrealistic to
handle each protocol in its wire format.
This commit adopts a new strategy, by converting OpenFlow actions into
an internal form from the wire format when they are read, and converting
them back to the wire format when flows are dumped. I believe that this
will be more maintainable over time.
Thanks to Simon Horman and Pravin Shelar for reviews.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Replaced all instances of Nicira Networks(, Inc) to Nicira, Inc.
Feature #10593
Signed-off-by: Raju Subramanian <rsubramanian@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Until now, parts of a field have been dealt with in a fairly ad-hoc way.
struct mf_subfield and the supporting functions added by this commit make
their use more systematic.
Signed-off-by: Ben Pfaff <blp@nicira.com>
This commit switches from using the actual protocol values of error codes
internally in Open vSwitch, to using abstract values that are translated to
and from protocol values at message parsing and serialization time. I
believe that this makes the code easier to read and to write.
This is also one step along the way toward OpenFlow 1.1 support because
OpenFlow 1.1 renumbered a bunch of error codes.
Signed-off-by: Ben Pfaff <blp@nicira.com>
In C, the || operator yields 0 or 1, not (as in some other languages) the
value of its first nonzero operand.
Found by inspection.
Signed-off-by: Ben Pfaff <blp@nicira.com>
I don't expect this bundling algorithm to be particularly useful in
software switches. However, hardware switches will probably only
support this bundling algorithm, so it's implemented here as an
example and a reference.
This patch creates a new action called "bundle". Bundles are a way
to implement a simple form of multipath in OpenFlow by grouping
several ports in a single output-like action.
