Memory pool for vhost-user ports always created even if construction
fails. And message about successfull socket creation also printed.
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Signed-off-by: Ben Pfaff <blp@ovn.org>
While killing OVS may not call rte_vhost_driver_unregister()
for vhost-user ports. As a result corresponding socket will
remain in a system and opening of that port after restart
will fail.
(Even after this patch this remains a problem for signals
that OVS does not or cannot catch, such as SIGSEGV and
SIGKILL.)
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Signed-off-by: Ben Pfaff <blp@ovn.org>
Most of the network cards today supports multiple receive
and transmit queues (MQ). The core idea is that on packet
reception, a NIC can send different packets to different
queues to distribute processing among CPUs running in parallel.
The packet distribution is based on a result of a filter applied
on each packet headers. The filter should keep all packets from
the same flow on the same queue to avoid re-ordering while
distributing different flows among all available queues.
This is how the packet moves in a typical vhost-user use-case:
NIC OVS
DPDK port ==== bridge --- vhost-user ==== qemu ==== virtio eth0
The DPDK ports, OVS bridges, virtio network driver and
recently QEMU (vhost-user) supports MQ. This patch adds MQ
support to OVS that leverages DPDK vhost library to implement
vhost-user interfaces.
Signed-off-by: Flavio Leitner <fbl@sysclose.org>
Acked-by: Kevin Traynor <kevin.traynor@intel.com>
Signed-off-by: Daniele Di Proietto <diproiettod@vmware.com>
Following changes have been applied:
- INSTALL.DPDK.md: change DPDK version number,
- build.sh: change DPDK version number.
Signed-off-by: Michal Weglicki <michalx.weglicki@intel.com>
Signed-off-by: Daniele Di Proietto <diproiettod@vmware.com>
DPDK build was broken after commit 2f8932e8403a ("poll: Suppress logging
for pmd threads.") due to the following error:
lib/netdev-dpdk.c:245:13: error: static declaration of ‘thread_is_pmd’
follows non-static declaration
lib/ovs-thread.h:526:6: note: previous declaration of ‘thread_is_pmd’
was here
The version used in this file operates in the fastpath, so it cannot
switch to using the newly introduced version; the new version lives
outside of the dpdk portions of OVS so its implementation cannot be
shared with this function. Rename it to resolve the conflict.
Fixes: 2f8932e8403a ("poll: Suppress logging for pmd threads.")
Suggested-by: Flavio Leitner <fbl@sysclose.org>
Signed-off-by: Joe Stringer <joe@ovn.org>
Acked-by: Flavio Leitner <fbl@sysclose.org>
This avoids a segmentation fault in case of memory allocation failure.
Found by inspection.
Signed-off-by: Ben Pfaff <blp@ovn.org>
Acked-by: Aaron Conole <aconole@redhat.com>
This change prevents netdev_dpdk from accessing pointer
which is not valid.
Signed-off-by: Michal Weglicki <michalx.weglicki@intel.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Although netdev does explicit locking, it is only valid from the ovs
perspective, then only the ring ends used by ovs should be declared as
single producer/consumer.
The other ends that are used by the application should be declared as
multiple producer/consumer that is the most general case.
Signed-off-by: Mauricio Vasquez B <mauricio.vasquezbernal@studenti.polito.it>
Acked-by: Flavio Leitner <fbl@sysclose.org>
Acked-by: Daniele Di Proietto <diproiettod@vmware.com>
Unregister and delete the socket associated with a vhost-user
port when the port is deleted and/or the switch is brought down.
Do not delete the socket if the vhost-user device is still attached
to the guest.
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Acked-by: Daniele Di Proietto <diproiettod@vmware.com>
dpdk datapath needs to run as root. Block the --user
option for now. It is likely we will revisit this issue for possibly
supporting --user option for dpdk datapath process as well.
Signed-off-by: Andy Zhou <azhou@nicira.com>
Acked-by: Ben Pfaff <blp@nicira.com>
DPDK mbufs contain a valid RSS hash only if PKT_RX_RSS_HASH is
set in 'ol_flags'. Otherwise the hash is garbage and doesn't
relate to the packet.
This fixes an issue with vhost, which, being a virtual NIC, doesn't
compute the hash.
Reported-by: Dongjun <dongj@dtdream.com>
Suggested-by: Flavio Leitner <fbl@sysclose.org>
Acked-by: Kevin Traynor <kevin.traynor@intel.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Daniele Di Proietto <diproiettod@vmware.com>
New stats for vhost ports are rx_bytes, tx_bytes, multicast, rx_errors and
rx_length_errors. New stats for PMD ports are rx_dropped, rx_length_errors,
rx_crc_errors and rx_missed_errors. DPDK imissed packets are now classified
as dropped instead of errors.
Signed-off-by: Timo Puha <timox.puha@intel.com>
Tested-by: Daniele Di Proietto <diproiettod@vmware.com>
Acked-by: Flavio Leitner <fbl@sysclose.org>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Update relevant artifacts to add support for DPDK v2.1.0
- INSTALL.DPDK.md
- acinclude.m4: Change DPDK library name
- netdev-dpdk: Limit minimum mbuf size to to adapt to DPDK bug fix that
changes the treatment of the requested mbuf size
- build.sh: Change DPDK version number
Note that this breaks compatibility with DPDK v2.0.0 although only
for the library name change.
Note that throughput for vhost ports with mergeable buffers is reduced
about 10% due to a necessary bug fix in DPDK vhost code.
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Signed-off-by: Michal Weglicki <michalx.weglicki@intel.com>
Signed-off-by: Timo Puha <timox.puha@intel.com>
Acked-by: Daniele Di Proietto <diproiettod@vmware.com>
The netdev-dpdk uses the struct ether_addr rather than struct eth_addr
internal ovs datatype.
To facilitate using either the .ea OR the struct ether_addr.addr_bytes
argument for printing/logging, add a new ETH_ADDR_BYTES_ARG() define.
Signed-off-by: Aaron Conole <aconole@redhat.com>
[blp@nicira.com made stylistic changes]
Signed-off-by: Ben Pfaff <blp@nicira.com>
Define struct eth_addr and use it instead of a uint8_t array for all
ethernet addresses in OVS userspace. The struct is always the right
size, and it can be assigned without an explicit memcpy, which makes
code more readable.
"struct eth_addr" is a good type name for this as many utility
functions are already named accordingly.
struct eth_addr can be accessed as bytes as well as ovs_be16's, which
makes the struct 16-bit aligned. All use seems to be 16-bit aligned,
so some algorithms on the ethernet addresses can be made a bit more
efficient making use of this fact.
As the struct fits into a register (in 64-bit systems) we pass it by
value when possible.
This patch also changes the few uses of Linux specific ETH_ALEN to
OVS's own ETH_ADDR_LEN, and removes the OFP_ETH_ALEN, as it is no
longer needed.
This work stemmed from a desire to make all struct flow members
assignable for unrelated exploration purposes. However, I think this
might be a nice code readability improvement by itself.
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
It has been observed that some DPDK device (e.g intel xl710) report an
high number of queues but make some of them available only for special
functions (SRIOV). Therefore the queues will be counted in
rte_eth_dev_info_get(), but rte_eth_tx_queue_setup() will fail.
This commit works around the issue by retrying the device initialization
with a smaller number of queues, if a queue fails to setup.
Reported-by: Ian Stokes <ian.stokes@intel.com>
Tested-by: Ian Stokes <ian.stokes@intel.com>
Acked-by: Kevin Traynor <kevin.traynor@intel.com>
Signed-off-by: Daniele Di Proietto <diproiettod@vmware.com>
Signed-off-by: Ethan Jackson <ethan@nicira.com>
netdev_dpdk_set_multiq() should not set the number of configured rxq
and txq if the driver initialization fails (meaning that the driver
failed to setup the queues). Otherwise, on a subsequent call to
netdev_dpdk_set_multiq(), the code may believe that the queues have
already been setup and there's no work to be done.
This commit fixes the problem by restoring the old values if
dpdk_eth_dev_init() fails.
Reported-by: Ian Stokes <ian.stokes@intel.com>
Tested-by: Ian Stokes <ian.stokes@intel.com>
Signed-off-by: Daniele Di Proietto <diproiettod@vmware.com>
Signed-off-by: Ethan Jackson <ethan@nicira.com>
Acked-by: Ethan Jackson <ethan@nicira.com>
When tx queue is shared among CPUS,the pkts always be flush
in 'netdev_dpdk_eth_send'. So it is unnecessarily for flushing
in netdev_dpdk_rxq_recv Otherwise tx will be accessed without
locking.
Signed-off-by: Wei li <liw@dtdream.com>
Acked-by: Daniele Di Proietto <diproiettod@vmware.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
This patch adds support for a new port type to the userspace
datapath called dpdkvhostuser.
A new dpdkvhostuser port will create a unix domain socket which
when provided to QEMU is used to facilitate communication between
the virtio-net device on the VM and the OVS port on the host.
vhost-cuse ('dpdkvhost') ports are still available as 'dpdkvhostcuse'
ports and will be enabled if vhost-cuse support is detected in the
DPDK build specified during compilation of the switch. Otherwise,
vhost-user ports are enabled.
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Acked-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
This commit changes the semantics of 'netdev_set_multiq()' to allow OVS
DPDK to run on device with limited multi queue support.
* If a netdev doesn't have the requested number of rxqs it can simply
inform the datapath without failing.
* If a netdev doesn't have the requested number of txqs it should try
to create as many as possible and use locking.
Signed-off-by: Daniele Di Proietto <diproiettod@vmware.com>
Signed-off-by: Ethan Jackson <ethan@nicira.com>
Acked-by: Ethan Jackson <ethan@nicira.com>
Right now ethernet and ring devices use a mutex, while vhost devices use
a mutex or a spinlock to protect statistics. This commit introduces a
single spinlock that's always used for stats updates.
Signed-off-by: Daniele Di Proietto <diproiettod@vmware.com>
Signed-off-by: Ethan Jackson <ethan@nicira.com>
Acked-by: Ethan Jackson <ethan@nicira.com>
We used to reserve DPDK lcore 0 for non pmd operations, making it
difficult to use core 0 for packet processing.
DPDK 2.0 properly support non EAL threads with lcore LCORE_ID_ANY.
Using non EAL threads for non pmd threads, we do not need to reserve
any core for non pmd operations
Signed-off-by: Daniele Di Proietto <diproiettod@vmware.com>
Signed-off-by: Ethan Jackson <ethan@nicira.com>
Acked-by: Ethan Jackson <ethan@nicira.com>
DPDK lcore_id is unsigned. We need to support big values like
LCORE_ID_ANY (=UINT32_MAX). Therefore I am changing the type everywhere
in OVS.
Signed-off-by: Daniele Di Proietto <diproiettod@vmware.com>
Signed-off-by: Ethan Jackson <ethan@nicira.com>
Acked-by: Ethan Jackson <ethan@nicira.com>
This patch simplifies Rx/Tx NIC configuration by removing
custom values and using the defaults provided by the DPDK
PMDs. This also enables Rx vectorisation which improves
performance.
Signed-off-by: Kevin Traynor <kevin.traynor@intel.com>
Signed-off-by: Ethan Jackson <ethan@nicira.com>
Acked-by: Daniele Di Proietto <diproiettod@vmware.com>
The MAX_PKT_BURST and NETDEV_MAX_RX_BATCH macros had a confusing
relationship. They basically purport to do the same thing, making it
unclear which is the source of truth.
Furthermore, while NETDEV_MAX_RX_BATCH was 256, MAX_PKT_BURST was 32,
meaning we never process a batch larger than 32 packets further adding
to the confusion.
This patch resolves the issue by removing MAX_PKT_BURST completely,
and shrinking the new NETDEV_MAX_BURST macro to only 32. This should
have no change in the execution path except shrinking a couple of
structs and memory allocations (can't hurt).
Signed-off-by: Ethan Jackson <ethan@nicira.com>
Acked-by: Daniele Di Proietto <diproiettod@vmware.com>
The max allowed burst size for a single vhost enqueue is 32.
This code facilitates trying to send greater than the burst
size of packets to the vhost interface by adding a retry loop
and calling vhost enqueue multiple times. As this could
potentially block, a timeout is added.
Signed-off-by: Kevin Traynor <kevin.traynor@intel.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Change phy rx burst size from 192 to 32. This aligns the
burst size with the other dpdk interfaces and significantly
improves performance when forwarding to dpdk vhost ports.
Signed-off-by: Kevin Traynor <kevin.traynor@intel.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Update relevant artifacts to add support for DPDK v2.0.0
- INSTALL.DPDK.md
- travis build script
- acinclude.m4: add 'mssse3' flag to OVS_CFLAGS
- netdev-dpdk: fix build with unified offload types in DPDK v2.0.0
Note that this breaks compatibility with DPDK v1.8.0
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
When using DPDK rings (dpdkr port type), packet buffers get shared
to consumers of the rings (e.g. Virtual Machines). The packet buffers
also include the RSS hash. This is a hash of a number of fields
in the packet and is used in order to do a fast lookup in the EMC.
However, if a consumer of the packet modifies the packet without
regenerating the RSS hash, the EMC will use the same hash for lookup
even though the packet may belong to a different flow. This would
cause unnecessary collisions in the EMC reducing performance in the
presence of multiple flows.
To avoid receiving an incorrect RSS hash on reception from a DPDK
ring, the RSS hash needs to be reset on transmission. This will reduce
performance of the forwarding path as the RSS hash will need to
calculated for every packet received from an dpdkr but will behave
correctly in the presence of a large number of flows that get
modified by the consumer of a DPDK ring
Signed-off-by: Mark D. Gray <mark.d.gray@intel.com>
Acked-by: Daniele Di Proietto <diproiettod@vmware.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
ovsrcu_synchronize() is used when setting virtio_dev to NULL.
This results in an ovsrcu_quiesce_end() call which means the
cuse thread may not go into quiescent state again for an
indefinite time. Add an ovsrcu_quiesce_start() call to prevent
this.
Signed-off-by: Kevin Traynor <kevin.traynor@intel.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
If rte_mempool_create() fails with ENOMEM, try asking for a smaller
mempools. This patch enables OVS DPDK to run on systems without 1GB
hugepages
Signed-off-by: Daniele Di Proietto <diproiettod@vmware.com>
Acked-by: Ethan Jackson <ethan@nicira.com>
This patch adds support for a new port type to userspace datapath
called dpdkvhost. This allows KVM (QEMU) to offload the servicing
of virtio-net devices to its associated dpdkvhost port. Instructions
for use are in INSTALL.DPDK.
This has been tested on Intel multi-core platforms and with clients
that have virtio-net interfaces.
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Kevin Traynor <kevin.traynor@intel.com>
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
DPDK v1.8.0 makes significant changes to struct rte_mbuf, including
removal of the 'pkt' and 'data' fields. The latter, formally a
pointer, is now calculated via an offset from the start of the
segment buffer. So now dp_packet data is also stored as offset
from base pointer.
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Signed-off-by: Rory Sexton <rory.sexton@intel.com>
Signed-off-by: Kevin Traynor <kevin.traynor@intel.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Currently dp-packet make use of ofpbuf for managing packet
buffers. That complicates ofpbuf, by making dp-packet
independent of ofpbuf both libraries can be optimized for
their own use case.
This avoids mapping operation between ofpbuf and dp_packet
in datapath upcalls.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Jarno Rajahalme <jrajahalme@nicira.com>
Acked-by: Ben Pfaff <blp@nicira.com>
dp_packet is short and better name for datapath packet
structure.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Jarno Rajahalme <jrajahalme@nicira.com>
According to netdev-provider, this function should return
EOPNOTSUPP if not supported.
Signed-off-by: Mark D. Gray <mark.d.gray@intel.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
For testing purpose, developers may want to change the NON_PMD_CORE_ID
and use a different core for non-pmd threads. Since the netdev-dpdk
module is hard-coded to assert the non-pmd threads using core 0, such
change will cause abortion of OVS.
This commit fixes the assertion and allows changing NON_PMD_CORE_ID.
Signed-off-by: Alex Wang <alexw@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
A new function vlog_insert_module() is introduced to avoid using
list_insert() from the vlog.h header.
Signed-off-by: Thomas Graf <tgraf@noironetworks.com>
Acked-by: Ben Pfaff <blp@nicira.com>
Expose the struct ovs_list definition in <openvswitch/list.h>. Keep the
list access API private for now.
Signed-off-by: Thomas Graf <tgraf@noironetworks.com>
Acked-by: Ben Pfaff <blp@nicira.com>
struct list is a common name and can't be used in public headers.
Signed-off-by: Thomas Graf <tgraf@noironetworks.com>
Acked-by: Ben Pfaff <blp@nicira.com>
Following patch adds support for userspace tunneling. Tunneling
needs three more component first is routing table which is configured by
caching kernel routes and second is ARP cache which build automatically
by snooping arp. And third is tunnel protocol table which list all
listening protocols which is populated by vswitchd as tunnel ports
are added. GRE and VXLAN protocol support is added in this patch.
Tunneling works as follows:
On packet receive vswitchd check if this packet is targeted to tunnel
port. If it is then vswitchd inserts tunnel pop action which pops
header and sends packet to tunnel port.
On packet xmit rather than generating Set tunnel action it generate
tunnel push action which has tunnel header data. datapath can use
tunnel-push action data to generate header for each packet and
forward this packet to output port. Since tunnel-push action
contains most of packet header vswitchd needs to lookup routing
table and arp table to build this action.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Jarno Rajahalme <jrajahalme@nicira.com>
Acked-by: Thomas Graf <tgraf@noironetworks.com>
Acked-by: Ben Pfaff <blp@nicira.com>
DPDK rings don't need one queue per PMD thread and don't support multiple
queues (set_multiq function is undefined). To fix operation with DPDK rings,
this patch ignores EOPNOTSUPP error on netdev_set_multiq() and provides, for
DPDK rings, a netdev send() function that ignores the provided queue id
(= PMD thread core id).
Suggested-by: Maryam Tahhan <maryam.tahhan@intel.com>
Signed-off-by: David Verbeiren <david.verbeiren@intel.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
When kernel cannot obtain the pci numa info, the numa_node file
in corresponding pci directory in sysfs will show -1. Then the
rte_eth_dev_socket_id() function will return it to ovs. On
current master, ovs assumes rte_eth_dev_socket_id() always
returns non-negative value. So using this -1 in pmd thread
creation will cause ovs crash.
To fix the above issue, this commit makes ovs always check the
return value of rte_eth_dev_socket_id() and use numa node 0 if
the return value is negative.
Reported-by: Daniel Badea <daniel.badea@windriver.com>
Signed-off-by: Alex Wang <alexw@nicira.com>
Acked-by: Daniele Di Proietto <ddiproietto@vmware.com>
Commit 5a0340 (dpif-netdev: Create multiple tx/rx queues when
adding dpdk interface.) introduced a bug which causes the function
netdev_dpdk_set_multiq() never resetting the tx queues. This bug
could cause pmd thread accessing unassigned memory, resulting in
segfault.
This commit fixes the bug.
Reported-by: Ethan Jackson <ethan@nicira.com>
Signed-off-by: Alex Wang <alexw@nicira.com>
Acked-by: Daniele Di Proietto <ddiproietto@vmware.com>
Since dpdk_do_tx_copy() will be called by both pmd and
non-pmd thread, it should take the queue id as input.
The current ovs always uses NON_PMD_THREAD_TX_QUEUE
as queue id, which causes unprotected multi-access
to the same queue.
This commit fixes the issue by passing the queue id
to dpdk_do_tx_copy().
Reported-by: Ethan Jackson <ethan@nicira.com>
Signed-off-by: Alex Wang <alexw@nicira.com>
Acked-by: Daniele Di Proietto <ddiproietto@vmware.com>
