netdev_tc_flow_put() ignores the tunnel.tp_dst mask. That results
in the exact match on the value. TC supports the masked match on
this field and it does return the mask back during the flow dump
even if it wasn't provided initially. OVS should correctly handle
that. There is a problem though. Some drivers (mlx5) doesn't
support offloading if the destination port is not an exact match [1].
Keeping the logic as-is for now, but making it explicit and somewhat
documented in the comment, so it is clear what is happening and we can
revisit this in the future.
[1] https://patchwork.ozlabs.org/project/openvswitch/patch/20220704224505.1117988-3-i.maximets@ovn.org/#2927396
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
'wc.masks.tunnel.metadata.present.len' must be a mask for the same
field in the flow key, but in the tc_flower structure it's the real
length of metadata masks.
That is correctly handled for the individual opt->length, setting all
the masks to 0x1f like it's done in the tun_metadata_to_geneve_mask__(),
but not handled for the main 'len' field.
Fix that by setting the mask to 0xff like it's done during the flow
translation in xlate_actions() and during the flow dump in the
tun_metadata_from_geneve_nlattr().
Also, flower always has an exact match on the present.len field
regardless of its value and regardless of this field being masked
by OVS flow translation layer while installing the flow. Hence,
all tunnel flows dumped from TC should have an exact match on
present.len and also UDPIF flag, because present.len doesn't make
sense without that flag. Without the change, zero-length options
match is incorrectly reported as a wildcard match. The side effect
though is that zero-length match on geneve options is reported even
for other tunnel types, e.g. vxlan. But that should be fairly
harmless. To avoid reporting a match on empty geneve options for
vxlan/etc. tunnels we'll need to check the tunnel port type, there
is no enough information in the TUNNEL attribute itself.
Extra checks and comments added around the code to better explain
what is going on.
Fixes: a468645c6d33 ("lib/tc: add geneve with option match offload")
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
calc_offsets() function returns 'data' and 'mask' pointers, which
are pointers somewhere inside struct tc_flower_key, and they are not
aligned, causing misaligned memory access. For example:
ipv6.rewrite_hlimit is at 148 byte offset inside the struct
tc_flower_key. While the actual field is in the 7th byte of
the IPv6 header in the actual packet. So, pedit will need
to write the last byte of the [4-7] range to the actual packet.
So, data pointer is positioned to 145th byte inside the tc_flower_key
with the 000000FF mask. Obviously, 145th byte inside the structure
is not 4-byte aligned.
lib/tc.c:2879:34: runtime error:
load of misaligned address 0x7f2802eaa321 for type 'ovs_be32' (aka
'unsigned int'), which requires 4 byte alignment
0x7f2802eaa321: note: pointer points here
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ...
^
0 0xd7f2fb in nl_msg_put_flower_rewrite_pedits lib/tc.c:2879:34
1 0xd7f2fb in nl_msg_put_flower_acts lib/tc.c:3141:25
2 0xd6ae5a in nl_msg_put_flower_options lib/tc.c:3445:12
3 0xd6a2be in tc_replace_flower lib/tc.c:3712:17
4 0xd2bf25 in netdev_tc_flow_put lib/netdev-offload-tc.c:2224:11
5 0x94f6b7 in netdev_flow_put lib/netdev-offload.c:316:14
6 0xcbd19e in parse_flow_put lib/dpif-netlink.c:2289:11
7 0xcbd19e in try_send_to_netdev lib/dpif-netlink.c:2376:15
8 0xcbd19e in dpif_netlink_operate lib/dpif-netlink.c:2447:23
9 0x86536e in dpif_operate lib/dpif.c:1372:13
10 0x6bc289 in handle_upcalls ofproto/ofproto-dpif-upcall.c:1654:5
11 0x6bc289 in recv_upcalls ofproto/ofproto-dpif-upcall.c:892:9
12 0x6b766a in udpif_upcall_handler ofproto/ofproto-dpif-upcall.c:792:13
13 0xb5015a in ovsthread_wrapper lib/ovs-thread.c:422:12
14 0x7f280b2081ce in start_thread (/lib64/libpthread.so.0+0x81ce)
15 0x7f2809e39dd2 in clone (/lib64/libc.so.6+0x39dd2)
Fix misaligned read by using appropriate functions.
Fixes: 8ada482bbe19 ("tc: Add header rewrite using tc pedit action")
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
This change implements support for the check_pkt_len
action using the TC police action, which supports MTU
checking.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Acked-by: Mike Pattrick <mkp@redhat.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
When offloading rule, tc should be filled with police index, instead
of meter id. As meter is mapped to police action, and the mapping is
inserted into meter_id_to_police_idx hmap, this hmap is used to find
the police index. Besides, the reverse mapping between meter id and
police index is also added, so meter id can be retrieved from this
hashmap and pass to dpif while dumping rules.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
As the police actions with indexes of 0x10000000-0x1fffffff are
reserved for meter offload, to provide a clean environment for OVS,
these reserved police actions should be deleted on startup. So dump
all the police actions, delete those actions with indexes in this
range.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Add helpers to add, delete and get stats of police action with
the specified index.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Add function to parse police action from netlink message.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Pointers to gnet_stats_basic and tcf_t are not correctly aligned,
so we need to copy the data before accessing. Found by running
check-offloads testsuite with UBsan:
lib/tc.c:1791:50: runtime error:
member access within misaligned address 0x61900005ce1c for type
'const struct gnet_stats_basic', which requires 8 byte alignment
0x61900005ce1c: note: pointer points here
14 00 07 00 00 00 00 00 00 00 00 00 00 00 00 00 ...
^
0 0xd69044 in nl_parse_single_action lib/tc.c:1791:50
1 0xd69044 in nl_parse_flower_actions lib/tc.c:1841:19
2 0xd57612 in nl_parse_flower_options lib/tc.c:1893:12
3 0xd5468d in parse_netlink_to_tc_flower lib/tc.c:1941:12
4 0xd5a7ec in tc_replace_flower lib/tc.c:3199:19
5 0xd2baea in probe_tc_block_support lib/netdev-offload-tc.c:2226:13
6 0xd2baea in netdev_tc_init_flow_api lib/netdev-offload-tc.c:2279:9
7 0x94d726 in netdev_assign_flow_api lib/netdev-offload.c:183:14
8 0x94d726 in netdev_init_flow_api lib/netdev-offload.c:323:9
9 0x9515c7 in netdev_ports_flow_init lib/netdev-offload.c:775:8
10 0x9515c7 in netdev_set_flow_api_enabled lib/netdev-offload.c:815:13
11 0x562ec8 in bridge_run vswitchd/bridge.c:3292:9
12 0x59a98c in main vswitchd/ovs-vswitchd.c:129:9
13 0x7fb5c583acf2 in __libc_start_main (/lib64/libc.so.6+0x3acf2)
14 0x47e60d in _start (vswitchd/ovs-vswitchd+0x47e60d)
lib/tc.c:1306:43: runtime error:
member access within misaligned address 0x619000140324 for type
'const struct tcf_t', which requires 8 byte alignment
0x619000140324: note: pointer points here
24 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 ...
^
0 0xd6ee6f in nl_parse_tcf lib/tc.c:1306:43
1 0xd6423f in nl_parse_act_mirred lib/tc.c:1389:5
2 0xd6423f in nl_parse_single_action lib/tc.c:1747:15
3 0xd6423f in nl_parse_flower_actions lib/tc.c:1843:19
4 0xd57612 in nl_parse_flower_options lib/tc.c:1895:12
5 0xd5468d in parse_netlink_to_tc_flower lib/tc.c:1943:12
6 0xd5a7ec in tc_replace_flower lib/tc.c:3201:19
7 0xd28ae8 in netdev_tc_flow_put lib/netdev-offload-tc.c:1969:11
8 0x94cc97 in netdev_flow_put lib/netdev-offload.c:257:14
9 0xcba2be in parse_flow_put lib/dpif-netlink.c:2289:11
10 0xcba2be in try_send_to_netdev lib/dpif-netlink.c:2376:15
11 0xcba2be in dpif_netlink_operate lib/dpif-netlink.c:2447:23
12 0x8647ce in dpif_operate lib/dpif.c:1372:13
13 0x6b50a6 in push_dp_ops ofproto/ofproto-dpif-upcall.c:2406:5
14 0x6c9bcd in revalidate ofproto/ofproto-dpif-upcall.c:2792:13
15 0x6b79b5 in udpif_revalidator ofproto/ofproto-dpif-upcall.c:980:9
16 0xb4d5ea in ovsthread_wrapper lib/ovs-thread.c:422:12
17 0x7ff1090081ce in start_thread (/lib64/libpthread.so.0+0x81ce)
18 0x7ff107c39dd2 in clone (/lib64/libc.so.6+0x39dd2)
This patch fixes only problems reported by UBsan in current tests,
there could be more issues like this not currently covered by the
testsuite.
Acked-by: Dumitru Ceara <dceara@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
When programming NAT rules OVS only sets the minimum value for a
single IP/port value. However, responses from flower will always
return min == max for single IP/port values. This is causing the
verification to fail as the request is different than the response.
To avoid this, we will update the response to match the request.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Acked-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Regardless of the traffic type, if requested, the conntrack information
should be included to keep the datapath and tc rules in sync.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Acked-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
This change will set the correct VID and PCP masks, as well as the
ethernet type mask.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Acked-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
This patch adds more detailed debug logs on tc verify failures to
ease debugging the actual cause after the fact.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Acked-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Currently, tc merges all header rewrite actions into one tc pedit
action. So the header rewrite actions order is lost. Save each header
rewrite action into one tc pedit action to keep the order. And only
append one tc csum action to the last pedit action of a series.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Fragmented packets with offset=0 are defragmented by tc act_ct, and
only when assembled pass to next action, in ovs offload case,
a goto action. Since stats are overwritten on each action dump,
only the stats for last action in the tc filter action priority
list is taken, the stats on the goto action, which count
only the assembled packets. See below for example.
Hardware updates just part of the actions (gact, ct, mirred) - those
that support stats_update() operation. Since datapath rules end
with either an output (mirred) or recirc/drop (both gact), tc rule
will at least have one action that supports it. For software packets,
the first action will have the max software packets count.
Tc dumps total packets (hw + sw) and hardware packets, then
software packets needs to be calculated from this (total - hw).
To fix the above, get hardware packets and calculate software packets
for each action, take the max of each set, then combine back
to get the total packets that went through software and hardware.
Example by running ping above MTU (ping <IP> -s 2000):
ct_state(-trk),recirc_id(0),...,ipv4(proto=1,frag=first),
packets:14, bytes:19544,..., actions:ct(zone=1),recirc(0x1)
ct_state(-trk),recirc_id(0),...,ipv4(proto=1,frag=later),
packets:14, bytes:28392,..., actions:ct(zone=1),recirc(0x1)
Second rule should have had bytes=14*<size of 'later' frag>, but instead
it's bytes=14*<size of assembled packets - size of 'first' + 'later'
frags>.
Fixes: 576126a931cd ("netdev-offload-tc: Add conntrack support")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
When OVS installs the flower rule, it only checks for the OK from the
kernel. It does not check if the rule requested matches the one
actually programmed. This change will add this check and warns the
user if this is not the case.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Marcelo Ricardo Leitner <mleitner@redhat.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Previously, only chain 0 is deleted before attach the ingress block.
If there are rules on the chain other than 0, these rules are not flushed.
In this case, the recreation of qdisc also fails. To fix this issue, flush
rules from all chains.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Fix the reported back value of the bos mask used by the revalidator
threads.
Fixes: 34b1695506f8 ("lib/tc: add single mpls match offload support")
Reported-by: Marcelo Leitner <mleitner@redhat.com>
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Check overlap between current pedit key, which is always 4 bytes
(range [off, off + 3]), and a map entry in flower_pedit_map
sf = ROUND_DOWN(mf, 4) (range [sf|mf, (mf + sz - 1)|ef]).
So for the tos the rewite the off + 3(3) is greater than mf,
and should less than ef(4) but not mf+sz(2).
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
There is no need to pass tc rules to hw when just probing
for tc features. this will avoid redundant errors from hw drivers
that may happen.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Acked-By: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
A packet with first frag and execute act_ct action.
The packet will stole by defrag. So the stats counter
for "gact action goto chain" will always 0. The openvswitch
update each action in order. So the flower stats finally
alway be zero. The rule will be delete adter max-idle time
even there are packet executing the action.
ovs-appctl dpctl/dump-flows
recirc_id(0),in_port(1),eth_type(0x0800),ipv4(dst=11.0.0.7,frag=first), packets:0, bytes:0, used:5.390s, actions:ct(zone=1,nat),recirc(0x4)
filter protocol ip pref 2 flower chain 0 handle 0x2
eth_type ipv4
dst_ip 1.1.1.1
ip_flags frag/firstfrag
skip_hw
not_in_hw
action order 1: ct zone 1 nat pipe
index 2 ref 1 bind 1 installed 11 sec used 1 sec
Action statistics:
Sent 15000 bytes 11 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
cookie e04106c2ac41769b278edaa9b5309960
action order 2: gact action goto chain 1
random type none pass val 0
index 2 ref 1 bind 1 installed 11 sec used 11 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
cookie e04106c2ac41769b278edaa9b5309960
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
The cited commit intended to add tc support for masking tunnel src/dst
ips and ports. It's not possible to do tunnel ports masking with
openflow rules and the default mask for tunnel ports set to 0 in
tnl_wc_init(), unlike tunnel ports default mask which is full mask.
So instead of never passing tunnel ports to tc, revert the changes
to tunnel ports to always pass the tunnel port.
In sw classification is done by the kernel, but for hw we must match
the tunnel dst port.
Fixes: 5f568d049130 ("netdev-offload-tc: Allow to match the IP and port mask of tunnel")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Eli Britstein <elibr@mellanox.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
This patch allows to install arp rules to tc dp.
In the future, arp will be offloaded to hardware to
be processed. So OvS enable this now.
$ ovs-appctl dpctl/add-flow 'recirc_id(0),in_port(3),eth(),\
eth_type(0x0806),arp(op=2,tha=00:50:56:e1:4b:ab,tip=10.255.1.116)' 2
$ ovs-appctl dpctl/dump-flows
... arp(tip=10.255.1.116,op=2,tha=00:50:56:e1:4b:ab) ...
$ tc filter show dev <ethx> ingress
...
eth_type arp
arp_tip 10.255.1.116
arp_op reply
arp_tha 00:50:56:e1:4b:ab
not_in_hw
action order 1: mirred (Egress Redirect to device <ethy>) stolen
...
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
When dumping flows in terse mode set TCA_DUMP_FLAGS attribute to
TCA_DUMP_FLAGS_TERSE flag to prevent unnecessary copying of data between
kernel and user spaces. Only expect kernel to provide cookie, stats and
flags when dumping filters in terse mode.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
This patch allows users to offload the TC flower rules with
tunnel mask. This patch allows masked match of the following,
where previously supported an exact match was supported:
* Remote (dst) tunnel endpoint address
* Local (src) tunnel endpoint address
* Remote (dst) tunnel endpoint UDP port
And also allows masked match of the following, where previously
no match was supported:
* Local (src) tunnel endpoint UDP port
In some case, mask is useful as wildcards. For example, DDOS,
in that case, we don’t want to allow specified hosts IPs or
only source Ports to access the targeted host. For example:
$ ovs-appctl dpctl/add-flow "tunnel(dst=2.2.2.100,src=2.2.2.0/255.255.255.0,tp_dst=4789),\
recirc_id(0),in_port(3),eth(),eth_type(0x0800),ipv4()" ""
$ tc filter show dev vxlan_sys_4789 ingress
...
eth_type ipv4
enc_dst_ip 2.2.2.100
enc_src_ip 2.2.2.0/24
enc_dst_port 4789
enc_ttl 64
in_hw in_hw_count 2
action order 1: gact action drop
...
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Acked-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Not bugfix, make the codes more readable.
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Acked-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Zone and ct_state first.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Each recirculation id will create a tc chain, and we translate
the recirculation action to a tc goto chain action.
We check for kernel support for this by probing OvS Datapath for the
tc recirc id sharing feature. If supported, we can offload rules
that match on recirc_id, and recirculation action safely.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Since OvS datapath gets packets already decapsulated from tunnel devices,
it doesn't explicitly decapsulate them. So in a recirculation setup,
the tunnel matching continues in the recirculation as the tunnel
metadata still exists on the SKB.
Tunnel key unset action unsets this metadata. Some drivers might rely
on this explicit tunnel key unset to know when to decapsulate the packet
instead of the device type. So instead of removing it completly,
we move it near the output actions.
This way, we also keep SKB metadata through recirculation, and for
non-recirculation rules, the resulting tc rules should remain the same.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Move all that is needed to identify a tc filter to a
new structure, tcf_id. This removes a lot of duplication
in accessing/creating tc filters.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Recent changes in Linux kernel TC action subsystem introduced new
TCA_ACT_FLAGS_NO_PERCPU_STATS flag. The purpose of the flag is to request
action implementation to skip allocating action stats with expensive percpu
allocator and use regular built-in action stats instead. Such approach
significantly improves rule insertion rate and reduce memory usage for
hardware-offloaded rules that don't need benefits provided by percpu
allocated stats (improved software TC fast-path performance). Set the flag
for all compatible actions.
Modify acinclude.m4 to use OVS-internal pkt_cls.h implementation when
TCA_ACT_FLAGS is not defined by kernel headers and to manually define
struct nla_bitfield32 in netlink.h (new file) when it is not defined by
kernel headers.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Currently, ovs supports to offload max TCA_ACT_MAX_PRIO(32) actions.
But net sched api has a limit of 4K message size which is not enough
for 32 actions when echo flag is set.
After a lot of testing, we find that 16 actions is a reasonable number.
So in this commit, we introduced a new define to limit the max actions.
Fixes: 0c70132cd288("tc: Make the actions order consistent")
Signed-off-by: Chris Mi <chrism@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Recent modifications to TC allows the modifying of fields within the
outermost MPLS header of a packet. OvS datapath rules impliment an MPLS
set action by supplying a new MPLS header that should overwrite the
current one.
Convert the OvS datapath MPLS set action to a TC modify action and allow
such rules to be offloaded to a TC datapath.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
TC can now be used to push an MPLS header onto a packet. The MPLS label is
the only information that needs to be passed here with the rest reverting
to default values if none are supplied. OvS, however, gives the entire
MPLS header to be pushed along with the MPLS protocol to use. TC can
optionally accept these values so can be made replicate the OvS datapath
rule.
Convert OvS MPLS push datapath rules to TC format and offload to a TC
datapath.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
TC now supports an action to pop the outer MPLS header from a packet. The
next protocol after the header is required alongside this. Currently, OvS
datapath rules also supply this information.
Offload OvS MPLS pop actions to TC along with the next protocol.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Offloading rules to a TC datapath only allows the creating of ingress hook
qdiscs and the application of filters to these. However, there may be
certain situations where an egress qdisc is more applicable (e.g. when
offloading to TC rules applied to OvS internal ports).
Extend the TC API in OvS to allow the creation of egress qdiscs and to add
or interact with flower filters applied to these.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
The TC datapath only permits the offload of mirred actions if they are
egress. To offload TC actions that output to OvS internal ports, ingress
mirred actions are required. At the TC layer, an ingress mirred action
passes the packet back into the network stack as if it came in the action
port rather than attempting to egress the port.
Update OvS-TC offloads to support ingress mirred actions. To ensure
packets that match these rules are properly passed into the network stack,
add a TC skbedit action along with ingress mirred that sets the pkt_type
to PACKET_HOST. This mirrors the functionality of the OvS internal port
kernel module.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Firstly this patch introduces the notion of reserved priority, as the
filter implementing ingress policing would require the highest priority.
Secondly it allows setting rate limiters while tc-offloads has been
enabled. Lastly it installs a matchall filter that matches all traffic
and then applies a police action, when configuring an ingress rate
limiter.
An example of what to expect:
OvS CLI:
ovs-vsctl set interface <netdev_name> ingress_policing_rate=5000
ovs-vsctl set interface <netdev_name> ingress_policing_burst=100
Resulting TC filter:
filter protocol ip pref 1 matchall chain 0
filter protocol ip pref 1 matchall chain 0 handle 0x1
not_in_hw
action order 1: police 0x1 rate 5Mbit burst 125Kb mtu 64Kb
action drop/continue overhead 0b
ref 1 bind 1 installed 3 sec used 3 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to
10.0.0.200 () port 0 AF_INET : demo
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
131072 16384 16384 60.13 4.49
ovs-vsctl list interface <netdev_name>
_uuid : 2ca774e8-8b95-430f-a2c2-f8f742613ab1
admin_state : up
...
ingress_policing_burst: 100
ingress_policing_rate: 5000
...
type : ""
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Currently the TC tunnel_key action is always
initialized with the given tunnel id value. However,
some tunneling protocols define the tunnel id as an optional field.
This patch initializes the id field of tunnel_key:set and tunnel_key:unset
only if a value is provided.
In the case that a tunnel key value is not provided by the user
the key flag will not be set.
Signed-off-by: Adi Nissim <adin@mellanox.com>
Acked-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Extend ovs-tc translation by allowing non-byte-aligned fields
for set actions. Use new boundary shifts and add set ipv6 traffic
class action offload via pedit.
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: Louis Peens <louis.peens@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Add setting of ipv4 dscp and ecn fields in tc offload using pedit.
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: Louis Peens <louis.peens@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
pedit allows setting entire words with an optional mask and OVS
makes use of such masks to allow setting fields that do not span
entire words. One mask for leading bytes that should not be
updated and another mask for trailing bytes that should not be
updated. The masks are created using bit shifts.
In the case of the mask to omit trailing bytes a right bit shift
is used. Currently the code can produce shifts of 1, 2, 3 or 4
bytes (8, 16, 24 or 32 bits) based on the alignment of the end
of field being set.
However, a shift of 32 bits on a 32bit value is undefined.
As it stands the code relies on the result of UINT32_MAX >> 32
being UINT32_MAX. Or in other words a mask that results in the
pedit action setting all bytes of the word under operation.
This patch adjusts the code to use a shift of 0 for this case,
which gives the same result as the undefined behaviour that was
relied on, and appears logically correct as the desire is for no
trailing bytes (or bits!) to be omitted from the set action.
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
