mf_from_frag_string() sets all the upper bits of the nw_frag to make
sure the exact match check will pass. This was not taken into account
while splitting nw_frag and IP TOS bits into separate fields and the
mask clean up was removed from the cls_rule_set_frag_masked() which is
now called match_set_nw_frag_masked(). This leads to the case where
the match parsed from the string is not considered equal to the
match parsed from the OpenFlow, due to difference in masks. And that
is causing ovs-ofctl replace-flows to always replace flows that match
on nw_frag, even if they are exactly the same triggering unnecessary
flow table updates and revalidation.
$ cat frag_flows.txt
ip,in_port=1,nw_frag=yes actions=drop
$ ovs-ofctl dump-flows --no-stat --no-names br0
ip,in_port=1,nw_frag=yes actions=drop
$ ovs-ofctl -vvconn replace-flows br0 frag_flows.txt 2>&1 | grep MOD
NXT_FLOW_MOD: DEL_STRICT ip,in_port=1,nw_frag=yes actions=drop
NXT_FLOW_MOD: ADD ip,in_port=1,nw_frag=yes actions=drop
Clear the extra mask bits while setting match/flow structure from the
field to avoid the issue.
The issue mainly affects non-exact matches 'non_later' and 'yes', since
exact matches are special-handled in many places / considered equal to
not having a mask at all.
Note: ideally we would not use byte-sized is_all_ones() for exact match
checking, but use field-specific checks instead. However, this leads
to a much larger change throughout OVS code base and would be much
harder to backport. For now, fixing the issue in the way the code was
originally implemented.
Fixes: 9e44d715638a ("Don't overload IP TOS with the frag matching bits.")
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Previously a commit attempted to reset the mirror context when packets
were modified. However, this commit erroneously also reset the mirror
context when only a packet's metadata was modified. An intermediate
commit corrected this for tunnel metadata, but now that correction is
extended to other forms of metadata as well.
Fixes: feed7f677505 ("ofproto-dpif-upcall: Mirror packets that are modified.")
Reported-at: https://issues.redhat.com/browse/FDP-699
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Acked-by: Simon Horman <horms@ovn.org>
Signed-off-by: Mike Pattrick <mkp@redhat.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
"enum mf_subfield" (a 128byte object) is dynamically allocated a few
times just to set it to an all-ones mask.
Avoid dynamically allocating them by creating a static all-ones mask
similar to what was done with "exact_match_mask".
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Suggested-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
The ofproto layer currently treats nw_proto field as overloaded to mean
both that a proper nw layer exists, as well as the value contained in
the header for the nw proto. However, this is incorrect behavior as
relevant standards permit that any value, including '0' should be treated
as a valid value.
Because of this overload, when the ofproto layer builds action list for
a packet with nw_proto of 0, it won't build the complete action list that
we expect to be built for the packet. That will cause a bad behavior
where all packets passing the datapath will fall into an incomplete
action set.
The fix here is to unwildcard nw_proto, allowing us to preserve setting
actions for protocols which we know have support for the actions we
program. This means that a traffic which contains nw_proto == 0 cannot
cause connectivity breakage with other traffic on the link.
Reported-by: David Marchand <dmarchand@redhat.com>
Reported-at: https://bugzilla.redhat.com/show_bug.cgi?id=2134873
Acked-by: Ilya Maximets <i.maximets@ovn.org>
Signed-off-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
This is undefined behavior and was reported by UB Sanitizer:
lib/meta-flow.c:3445:16: runtime error:
member access within null pointer of type 'struct vl_mf_field'
0 0x6aad0f in mf_get_vl_mff lib/meta-flow.c:3445
1 0x6d96d7 in mf_from_oxm_header lib/nx-match.c:260
2 0x6d9e2e in nx_pull_header__ lib/nx-match.c:341
3 0x6daafa in nx_pull_header lib/nx-match.c:488
4 0x6abcb6 in mf_vl_mff_nx_pull_header lib/meta-flow.c:3605
5 0x73b9be in decode_NXAST_RAW_REG_MOVE lib/ofp-actions.c:2652
6 0x764ccd in ofpact_decode lib/ofp-actions.inc2:4681
[...]
lib/sset.c:315:12: runtime error: applying zero offset to null pointer
0 0xcc2e6a in sset_at_position lib/sset.c:315:12
1 0x5734b3 in port_dump_next ofproto/ofproto-dpif.c:4083:20
[...]
lib/ovsdb-data.c:2194:56:
runtime error: applying zero offset to null pointer
0 0x5e9530 in ovsdb_datum_added_removed lib/ovsdb-data.c:2194:56
1 0x4d6258 in update_row_ref_count ovsdb/transaction.c:335:17
2 0x4c360b in for_each_txn_row ovsdb/transaction.c:1572:33
[...]
lib/ofpbuf.c:440:30:
runtime error: applying zero offset to null pointer
0 0x75066d in ofpbuf_push_uninit lib/ofpbuf.c:440
1 0x46ac8a in ovnacts_parse lib/actions.c:4190
2 0x46ad91 in ovnacts_parse_string lib/actions.c:4208
3 0x4106d1 in test_parse_actions tests/test-ovn.c:1324
[...]
lib/ofp-actions.c:3205:22:
runtime error: applying non-zero offset 2 to null pointer
0 0x6e1641 in set_field_split_str lib/ofp-actions.c:3205:22
[...]
lib/tnl-ports.c:74:12:
runtime error: applying zero offset to null pointer
0 0xceffe7 in tnl_port_cast lib/tnl-ports.c:74:12
1 0xcf14c3 in map_insert lib/tnl-ports.c:116:13
[...]
ofproto/ofproto.c:8905:16:
runtime error: applying zero offset to null pointer
0 0x556795 in eviction_group_hash_rule ofproto/ofproto.c:8905:16
1 0x503f8d in eviction_group_add_rule ofproto/ofproto.c:9022:42
[...]
Also, it's valid to have an empty ofpact list and we should be able to
try to iterate through it.
UB Sanitizer report:
include/openvswitch/ofp-actions.h:222:12:
runtime error: applying zero offset to null pointer
0 0x665d69 in ofpact_end ./include/openvswitch/ofp-actions.h:222:12
1 0x66b2cf in ofpacts_put_openflow_actions lib/ofp-actions.c:8861:5
2 0x6ffdd1 in ofputil_encode_flow_mod lib/ofp-flow.c:447:9
[...]
Signed-off-by: Dumitru Ceara <dceara@redhat.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
CT zone could be set from a field that is not included in frozen
metadata. Consider the example rules which are typically seen in
OpenStack security group rules:
priority=100,in_port=1,tcp,ct_state=-trk,action=ct(zone=5,table=0)
priority=100,in_port=1,tcp,ct_state=+trk,action=ct(commit,zone=NXM_NX_CT_ZONE[]),2
The zone is set from the first rule's ct action. These two rules will
generate two megaflows: the first one uses zone=5 to query the CT module,
the second one sets the zone-id from the first megaflow and commit to CT.
The current implementation will generate a megaflow that does not use
ct_zone=5 as a match, but directly commit into the ct using zone=5, as zone is
set by an Imm not a field.
Consider a situation that one changes the zone id (for example to 15)
in the first rule, however, still keep the second rule unchanged. During
this change, there is traffic hitting the two generated megaflows, the
revaldiator would revalidate all megaflows, however, the revalidator will
not change the second megaflow, because zone=5 is recorded in the
megaflow, so the xlate will still translate the commit action into zone=5,
and the new traffic will still commit to CT as zone=5, not zone=15,
resulting in taffic drops and other issues.
Just like OVS set-field convention, if a field X is set by Y
(Y is a variable not an Imm), we should also mask Y as a match
in the generated megaflow. An exception is that if the zone-id is
set by the field that is included in the frozen state (i.e. regs) and this
upcall is a resume of a thawed xlate, the un-wildcarding can be skipped,
as the recirc_id is a hash of the values in these fields, and it will change
following the changes of these fields. When the recirc_id changes,
all megaflows with the old recirc id will be invalid later.
Fixes: 07659514c3 ("Add support for connection tracking.")
Reported-by: Sai Su <susai.ss@bytedance.com>
Signed-off-by: Peng He <hepeng.0320@bytedance.com>
Acked-by: Mark D. Gray <mark.d.gray@redhat.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
From man ovs-fields(7), the conntrack origin tuple fields
ct_nw_src/dst, ct_ipv6_src/dst, and ct_tp_src/dst are supposed
to be bitwise maskable, but they are not. This patch enables
those fields to be maskable, and adds a regression test.
Fixes: daf4d3c18da4 ("odp: Support conntrack orig tuple key.")
Reported-by: Wenying Dong <wenyingd@vmware.com>
Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com>
Signed-off-by: William Tu <u9012063@gmail.com>
GTP, GPRS Tunneling Protocol, is a group of IP-based communications
protocols used to carry general packet radio service (GPRS) within
GSM, UMTS and LTE networks. GTP protocol has two parts: Signalling
(GTP-Control, GTP-C) and User data (GTP-User, GTP-U). GTP-C is used
for setting up GTP-U protocol, which is an IP-in-UDP tunneling
protocol. Usually GTP is used in connecting between base station for
radio, Serving Gateway (S-GW), and PDN Gateway (P-GW).
This patch implements GTP-U protocol for userspace datapath,
supporting only required header fields and G-PDU message type.
See spec in:
https://tools.ietf.org/html/draft-hmm-dmm-5g-uplane-analysis-00
Tested-at: https://travis-ci.org/github/williamtu/ovs-travis/builds/666518784
Signed-off-by: Feng Yang <yangfengee04@gmail.com>
Co-authored-by: Feng Yang <yangfengee04@gmail.com>
Signed-off-by: Yi Yang <yangyi01@inspur.com>
Co-authored-by: Yi Yang <yangyi01@inspur.com>
Signed-off-by: William Tu <u9012063@gmail.com>
Acked-by: Ben Pfaff <blp@ovn.org>
This commit adds additional verification to nx_pull_header__()
in lib/nx-match.c to distinguish between bad match and bad action
header conditions and return the appropriate error type/code.
Signed-off-by: Prashanth Iyengar <prashanth_iyengar@alliedtelesis.com>
Reviewed-by: Tony van der Peet <tony.vanderpeet@alliedtelesis.co.nz>
Reviewed-by: Rahul Gupta <Rahul_Gupta@alliedtelesis.com>
Currently OVS supports all ARP protocol fields as OXM match fields to
implement the relevant ARP procedures for IPv4. This includes support
for matching copying and setting ARP fields. In IPv6 ARP has been
replaced by ICMPv6 neighbor discovery (ND) procedures, neighbor
advertisement and neighbor solicitation.
The support for ICMPv6 fields in OVS is not complete for the use cases
equivalent to ARP in IPv4. OVS lacks support for matching, copying and
setting the “ND option type” and “ND reserved” fields. Without these user
cannot implement all ICMPv6 ND procedures for IPv6 support.
This commit adds additional OXM fields to OVS for ICMPv6 “ND option type“
and ICMPv6 “ND reserved” using the OXM extension mechanism. This allows
support for parsing these fields from an ICMPv6 packet header and extending
the OpenFlow protocol with specifications for these new OXM fields for
matching, copying and setting.
Signed-off-by: Vishal Deep Ajmera <vishal.deep.ajmera@ericsson.com>
Co-authored-by: Ashvin Lakshmikantha <ashvin.lakshmikantha@ericsson.com>
Signed-off-by: Ashvin Lakshmikantha <ashvin.lakshmikantha@ericsson.com>
Signed-off-by: Ben Pfaff <blp@ovn.org>
This allows a controller to change the name of OpenFlow flow tables in the
OVS software switch.
CC: Brad Cowie <brad@cowie.nz>
Acked-by: Justin Pettit <jpettit@ovn.org>
Signed-off-by: Ben Pfaff <blp@ovn.org>
All the users of mf_vl_mff_mf_from_nxm_header() expect it to always obtain
a valid field or to report an error. In practice, it did not report an
error in the case where the field was unknown (although it did report an
error in some other cases). This commit fixes the problem.
Reported-at: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=9652
Signed-off-by: Ben Pfaff <blp@ovn.org>
Acked-by: Alin Gabriel Serdean <aserdean@ovn.org>
By default, these function are to change the first vlan vid and pcp
in the flow. Add a parameter as index for vlans if we want to handle
the second ones.
Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
The error message states that "not_first" is a valid selection
for the ip_frag field, but looking at the structure that is defined
this should say "not_later".
Signed-off-by: Louis Peens <louis.peens@netronome.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Acked-by: Ben Pfaff <blp@ovn.org>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
ERSPAN is a tunneling protocol based on GRE tunnel. The patch
add erspan tunnel support for ovs-vswitchd with userspace datapath.
Configuring erspan tunnel is similar to gre tunnel, but with
additional erspan's parameters. Matching a flow on erspan's
metadata is also supported, see ovs-fields for more details.
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: Greg Rose <gvrose8192@gmail.com>
Signed-off-by: Ben Pfaff <blp@ovn.org>
ofp-util had been far too large and monolithic for a long time. This
commit breaks it up into units that make some logical sense. It also
moves the pieces of ofp-parse that were specific to each unit into the
relevant unit.
Most of this commit is just moving code around.
Signed-off-by: Ben Pfaff <blp@ovn.org>
Reviewed-by: Yifeng Sun <pkusunyifeng@gmail.com>
IETF NSH draft added a new filed ttl in NSH header, this patch
is to add new nsh key 'ttl' for it.
Signed-off-by: Yi Yang <yi.y.yang@intel.com>
Signed-off-by: Ben Pfaff <blp@ovn.org>
This patch changes OVS_KEY_ATTR_NSH
to nested attribute and adds three new NSH sub attribute keys:
OVS_NSH_KEY_ATTR_BASE: for length-fixed NSH base header
OVS_NSH_KEY_ATTR_MD1: for length-fixed MD type 1 context
OVS_NSH_KEY_ATTR_MD2: for length-variable MD type 2 metadata
Its intention is to align to NSH kernel implementation.
NSH match fields, set and PUSH_NSH action all use the below
nested attribute format:
OVS_KEY_ATTR_NSH begin
OVS_NSH_KEY_ATTR_BASE
OVS_NSH_KEY_ATTR_MD1
OVS_KEY_ATTR_NSH end
or
OVS_KEY_ATTR_NSH begin
OVS_NSH_KEY_ATTR_BASE
OVS_NSH_KEY_ATTR_MD2
OVS_KEY_ATTR_NSH end
In addition, NSH encap and decap actions are renamed as push_nsh
and pop_nsh to meet action naming convention.
Signed-off-by: Yi Yang <yi.y.yang@intel.com>
Signed-off-by: Ben Pfaff <blp@ovn.org>
This patch adds support for NSH packet header fields to the OVS
control plane and the userspace datapath. Initially we support the
fields of the NSH base header as defined in
https://www.ietf.org/id/draft-ietf-sfc-nsh-13.txt
and the fixed context headers specified for metadata format MD1.
The variable length MD2 format is parsed but the TLV context headers
are not yet available for matching.
The NSH fields are modelled as experimenter fields with the dedicated
experimenter class 0x005ad650 proposed for NSH in ONF. The following
fields are defined:
NXOXM code ofctl name Size Comment
=====================================================================
NXOXM_NSH_FLAGS nsh_flags 8 Bits 2-9 of 1st NSH word
(0x005ad650,1)
NXOXM_NSH_MDTYPE nsh_mdtype 8 Bits 16-23
(0x005ad650,2)
NXOXM_NSH_NEXTPROTO nsh_np 8 Bits 24-31
(0x005ad650,3)
NXOXM_NSH_SPI nsh_spi 24 Bits 0-23 of 2nd NSH word
(0x005ad650,4)
NXOXM_NSH_SI nsh_si 8 Bits 24-31
(0x005ad650,5)
NXOXM_NSH_C1 nsh_c1 32 Maskable, nsh_mdtype==1
(0x005ad650,6)
NXOXM_NSH_C2 nsh_c2 32 Maskable, nsh_mdtype==1
(0x005ad650,7)
NXOXM_NSH_C3 nsh_c3 32 Maskable, nsh_mdtype==1
(0x005ad650,8)
NXOXM_NSH_C4 nsh_c4 32 Maskable, nsh_mdtype==1
(0x005ad650,9)
Co-authored-by: Johnson Li <johnson.li@intel.com>
Signed-off-by: Yi Yang <yi.y.yang@intel.com>
Signed-off-by: Jan Scheurich <jan.scheurich@ericsson.com>
Signed-off-by: Ben Pfaff <blp@ovn.org>
Allow packet type namespace OFPHTN_ETHERTYPE as alternative pre-requisite
for matching L3 protocols (MPLS, IP, IPv6, ARP etc).
Change the meta-flow definition of packet_type field to use the new
custom format MFS_PACKET_TYPE representing "(NS,NS_TYPE)".
Parsing routine for MFS_PACKET_TYPE added to meta-flow.c. Formatting
routine for field packet_type extracted from match_format() and moved to
flow.c to be used from meta-flow.c for formatting MFS_PACKET_TYPE.
Updated the ovs-fields man page source meta-flow.xml with documentation
for packet-type-aware bridges and added documentation for field packet_type.
Added packet_type to the matching properties in tests/ofproto.at.
If dl_type is unwildcarded due to later packet modification, make sure it
is cleared again if the original packet_type was not PT_ETH.
Signed-off-by: Jan Scheurich <jan.scheurich@ericsson.com>
Signed-off-by: Ben Pfaff <blp@ovn.org>
Ports have a new layer3 attribute if they send/receive L3 packets.
The packet_type included in structs dp_packet and flow is considered in
ofproto-dpif. The classical L2 match fields (dl_src, dl_dst, dl_type, and
vlan_tci, vlan_vid, vlan_pcp) now have Ethernet as pre-requisite.
A dummy ethernet header is pushed to L3 packets received from L3 ports
before the the pipeline processing starts. The ethernet header is popped
before sending a packet to a L3 port.
For datapath ports that can receive L2 or L3 packets, the packet_type
becomes part of the flow key for datapath flows and is handled
appropriately in dpif-netdev.
In the 'else' branch in flow_put_on_pmd() function, the additional check
flow_equal(&match.flow, &netdev_flow->flow) was removed, as a) the dpcls
lookup is sufficient to uniquely identify a flow and b) it caused false
negatives because the flow in netdev->flow may not properly masked.
In dpif_netdev_flow_put() we now use the same method for constructing the
netdev_flow_key as the one used when adding the flow to the dplcs to make sure
these always match. The function netdev_flow_key_from_flow() used so far was
not only inefficient but sometimes caused mismatches and subsequent flow
update failures.
The kernel datapath does not support the packet_type match field.
Instead it encodes the packet type implictly by the presence or absence of
the Ethernet attribute in the flow key and mask.
This patch filters the PACKET_TYPE attribute out of netlink flow key and
mask to be sent to the kernel datapath.
Signed-off-by: Lorand Jakab <lojakab@cisco.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Yi Yang <yi.y.yang@intel.com>
Signed-off-by: Jan Scheurich <jan.scheurich@ericsson.com>
Co-authored-by: Zoltan Balogh <zoltan.balogh@ericsson.com>
Signed-off-by: Ben Pfaff <blp@ovn.org>
Until now, most ovs-ofctl commands have not accepted names for ports, only
numbers, and have not been able to display port names either. It's a lot
easier for users if they can use and see meaningful names instead of
arbitrary numbers. This commit adds that support.
For backward compatibility, only interactive ovs-ofctl commands by default
display port names; to display them in scripts, use the new --names
option.
Signed-off-by: Ben Pfaff <blp@ovn.org>
Tested-by: Aaron Conole <aconole@redhat.com>
This patch decodes pipeline fields from a packet-out message, and populates
the pipeline fields into datapath. Error OFPERR_OFPBRC_PIPELINE_FIELDS_ONLY
is returned if the match field of a packet-out messages contains any
non pipeline fields. Currently, the supported pipeline fields
are as following.
* metadata fields:
- in_port, in_port_oxm
* tunnel fields:
- tun_id, tun_src, tun_dst, tun_ipv6_src, tun_ipv6_dst
- tun_gbp_id, tun_gpb_flags, tun_flags
- tun_metadata0 - tun_metadata63
* register fields:
- metadata
- reg0 - reg-15, xreg0 - xreg7, xxreg0 - xxreg3
Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com>
Signed-off-by: Ben Pfaff <blp@ovn.org>
Conntrack original direction tuple fields depend on the conntrack
state and the type of the packet that was tracked. These dependencies
were encoded as OpenFlow prerequisites in commit daf4d3c18da4 ("odp:
Support conntrack orig tuple key."). However, having a prerequisite
from a metadata field to a packet header turned out to be problematic,
since sometimes we are decoding metadata fields alone, so that the
packet type field is not available.
The reason for the packet type dependency is that the IP addresses in
the original direction tuple can be either IPv4 or IPv6 addresses, and
it would be invalid to match on IPv4 original direction tuple
addresses for an IPv6 packet and vica verca. Upon closer look,
however, allowing this kind of mismatched match only causes the flow
to never match anything, rather than causing more severe problems.
This patch removes the formal prerequisite on the packet type, but
replaces that with an explicit check for the mismatch on flow install.
This way we can still return an error to the controller if it tries to
install a mismatched flow.
Reported-by: Dong Jun <dongj@dtdream.com>
Reported-at: https://mail.openvswitch.org/pipermail/ovs-dev/2017-March/330052.html
Fixes: 7befb20d0f70 ("nx-match: Fix oxm decode.")
Fixes: daf4d3c18da4 ("odp: Support conntrack orig tuple key.")
Suggested-by: Numan Siddique <nusiddiq@redhat.com>
Suggested-by: Ben Pfaff <blp@ovn.org>
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Tested-by: Numan Siddique <nusiddiq@redhat.com>
Acked-by: Numan Siddique <nusiddiq@redhat.com>
Acked-by: Ben Pfaff <blp@ovn.org>
Flow key handling changes:
- Add VLAN header array in struct flow, to record multiple 802.1q VLAN
headers.
- Add dpif multi-VLAN capability probing. If datapath supports
multi-VLAN, increase the maximum depth of nested OVS_KEY_ATTR_ENCAP.
Refactor VLAN handling in dpif-xlate:
- Introduce 'xvlan' to track VLAN stack during flow processing.
- Input and output VLAN translation according to the xbundle type.
Push VLAN action support:
- Allow ethertype 0x88a8 in VLAN headers and push_vlan action.
- Support push_vlan on dot1q packets.
Use other_config:vlan-limit in table Open_vSwitch to limit maximum VLANs
that can be matched. This allows us to preserve backwards compatibility.
Add test cases for VLAN depth limit, Multi-VLAN actions and QinQ VLAN
handling
Co-authored-by: Thomas F Herbert <thomasfherbert@gmail.com>
Signed-off-by: Thomas F Herbert <thomasfherbert@gmail.com>
Co-authored-by: Xiao Liang <shaw.leon@gmail.com>
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Signed-off-by: Eric Garver <e@erig.me>
Signed-off-by: Ben Pfaff <blp@ovn.org>
Currently, a controller may potentially trigger a segmentation fault if it
accidentally removes a TLV mapping that is still used by an active flow.
To resolve this issue, in this patch, we maintain reference counting for each
dynamically allocated variable length mf_fields, so that vswitchd can use this
information to properly remove a TLV mapping, and to return an error if the
controller tries to remove a TLV mapping that is still used by any active flow.
To keep track of the usage of tun_metadata for each flow, two 'uint64_t'
bitmaps are introduce for the flow match and flow action respectively. We use
'uint64_t' as a bitmap since the 64 geneve TLV tunnel metadata are the only
available variable length mf_fields for now. We shall adopt general bitmap when
more variable length mf_fields are introduced. The bitmaps are configured
during the flow decoding process, and vswitchd use these bitmaps to increase or
decrease the ref counting when the flow is created or deleted.
VMWare-BZ: #1768370
Fixes: 04f48a68c428 ("ofp-actions: Fix variable length meta-flow OXMs.")
Suggested-by: Jarno Rajahalme <jarno@ovn.org>
Suggested-by: Joe Stringer <joe@ovn.org>
Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com>
Signed-off-by: Joe Stringer <joe@ovn.org>
Supply the match mask to prerequisities checking when available. This
allows checking for zero-valued matches. Non-zero valued matches
imply the presense of corresponding mask bits, but for zero valued
matches we must explicitly check the mask, too.
This is required now only for conntrack validity checking due to the
conntrack state having and 'invalid' bit, but not 'valid' bit. One
way to match an valid conntrack state is to match on the 'tracked' bit
being one and 'invalid' bit being zero. The latter requires the
corresponding mask bit be verified.
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Acked-by: Joe Stringer <joe@ovn.org>
Previous patch 04f48a68 ("ofp-actions: Fix variable length meta-flow OXMs.")
introduced dependency of an internal library (cmap.h) to ovs public
interface (meta-flow.h) that may cause potential building problem. In this
patch, we remove cmap from struct mf_field, and provide a wrapper struct
vl_mff_map that resolve the dependency problem.
Fixes: 04f48a68c428 ("ofp-actions: Fix variable length meta-flow OXMs.")
Suggested-by: Joe Stringer <joe@ovn.org>
Suggested-by: Daniele Di Proietto <diproiettod@vmware.com>
Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com>
Signed-off-by: Joe Stringer <joe@ovn.org>
Previously, if a flow action that involves a tunnel metadata meta-flow
field is dumped from vswitchd, the replied field length in the OXM header
is filled with the maximum possible field length, instead of the length
configured in the tunnel TLV mapping table. To solve this issue, this patch
introduces the following changes.
In order to maintain the correct length of variable length mf_fields (i.e.
tun_metadata), this patch creates a per-switch based map (struct vl_mff_map)
that hosts the variable length mf_fields. This map is updated when a
controller adds/deletes tlv-mapping entries to/from a switch. Although the
per-swtch based vl_mff_map only hosts tun_metadata for now, it is able to
support new variable length mf_fields in the future.
With this commit, when a switch decodes a flow action with mf_field, the switch
firstly looks up the global mf_fields map to identify the mf_field type. For
the variable length mf_fields, the switch uses the vl_mff_map to get the
configured mf_field entries. By lookig up vl_mff_map, the switch can check
if the added flow action access beyond the configured size of a variable
length mf_field, and the switch reports an ofperr if the controller adds a flow
with unmapped variable length mf_field. Later on, when a controller request
flows from the switch, with the per-switch based mf_fields, the switch will
encode the OXM header with correct length for variable length mf_fields.
To use the vl_mff_map for decoding flow actions, extract-ofp-actions is
updated to pass the vl_mff_map to the required action decoding functions.
Also, a new error code is introduced to identify a flow with an invalid
variable length mf_field. Moreover, a testcase is added to prevent future
regressions.
Committer notes:
- Factor out common code
- Style fixups
- Rename OFPERR_NXFMFC_INVALID_VL_MFF -> OFPERR_NXFMFC_INVALID_TLV_FIELD
VMWare-BZ: #1768370
Reported-by: Harold Lim <haroldl@vmware.com>
Suggested-by: Joe Stringer <joe@ovn.org>
Suggested-by: Jarno Rajahalme <jarno@ovn.org>
Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com>
Signed-off-by: Joe Stringer <joe@ovn.org>
Allow using match field names in addition to the canonical register
names in actions (including 'load', 'move', 'push', 'pop', 'output',
'multipath', 'bundle_load', and 'learn'). Allow also leaving out the
trailing '[]' to indicate full field. These changes allow simpler
syntax similar to 'set_field' to be used also elsewhere.
Correspondingly, allow the '[start..end]' syntax to be used in matches
in addition to the more explicit 'value/mask' notation. For example,
to match on the value 2 of the bits 14..15 of NXM_NX_REG0, the match
could include:
... reg0[14..15]=2 ...
instead of
... reg0=0x8000/0xc000 ...
Note that only contiguous masks can be specified with the bracket
notation.
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Acked-by: Ben Pfaff <blp@ovn.org>
Some of these references are not valid anymore, as things were moved to
either meta-flow.h or ofp-actions.c.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com>
Signed-off-by: Ben Pfaff <blp@ovn.org>
Make the immediate data member 'src_imm' of a learn spec allocated at
the end of the action for just the right size. This, together with
some structure packing saves on average of ~128 bytes for each learn
spec in each learn action. Typical learn actions have about 4 specs
each, so this amounts to saving about 0.5kb for each learn action.
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Acked-by: Ben Pfaff <blp@ovn.org>
The function nxm_execute_reg_move() was almost a general-purpose function
for manipulating subfields, except for its awkward interface that took a
struct ofpact_reg_move instead of a plain source and destination. This
commit introduces a general-purpose function in meta-flow that corrects
this flaw, and updates the callers. An upcoming commit will introduce a
new user of the function.
This commit also introduces a related function mf_subfield_swap() to swap
the contents of subfields. An upcoming commit will introduce the first
user.
Signed-off-by: Ben Pfaff <blp@ovn.org>
Acked-by: Ryan Moats <rmoats@us.ibm.com>
Acked-by: Justin Pettit <jpettit@ovn.org>
struct field_array is included in each ofgroup, but the current
implementation is very sparse, using more than 20kb of data.
Also loop over 1-bits instead of each and every MF type to make
processing faster.
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Acked-by: Ben Pfaff <blp@ovn.org>
The mask for non-present fields in struct field_array is always zero,
so hashing a prerequisite field that was not also specified for the
"hash" selection method boiled down to hashing a all-zeroes value and
unwildcarding the prerequisite field. Now that mf_are_prereqs_ok()
already takes care of unwildcarding, we can simplify the code by
hashing only the specified fields.
Also change the test case to include fields that have prerequisities.
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Acked-by: Ben Pfaff <blp@ovn.org>
Change mf_are_prereqs_ok() take a flow_wildcards pointer, so that the
wildcards can be set at the same time as the prerequisiteis are
checked. This makes it easier to write more obviously correct code.
Remove the functions mf_mask_field_and_prereqs() and
mf_mask_field_and_prereqs__(), and make the callers first check the
prerequisites, while supplying 'wc' to mf_are_prereqs_ok(), and if
successful, mask the bits of the field that were read or set using
mf_mask_field_masked().
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Acked-by: Ben Pfaff <blp@ovn.org>
To easily allow both in- and out-of-tree building of the Python
wrapper for the OVS JSON parser (e.g. w/ pip), move json.h to
include/openvswitch. This also requires moving lib/{hmap,shash}.h.
Both hmap.h and shash.h were #include-ing "util.h" even though the
headers themselves did not use anything from there, but rather from
include/openvswitch/util.h. Fixing that required including util.h
in several C files mostly due to OVS_NOT_REACHED and things like
xmalloc.
Signed-off-by: Terry Wilson <twilson@redhat.com>
Signed-off-by: Ben Pfaff <blp@ovn.org>
IGMP translations wasn't setting enough bits in the wildcards to ensure
different packets were handled differently.
Reported-by: "O'Reilly, Darragh" <darragh.oreilly@hpe.com>
Reported-at: http://openvswitch.org/pipermail/discuss/2016-April/021036.html
Signed-off-by: Ben Pfaff <blp@ovn.org>
Commit f2d105b5 (ofproto-dpif-xlate: xlate ct_{mark, label} correctly.)
introduced the ovs_u128_and() function. It directly takes ovs_u128
values as arguments instead of pointers to them. As this is a bit more
direct way to deal with 128-bit values, modify the other utility
functions to do the same.
Signed-off-by: Justin Pettit <jpettit@ovn.org>
Acked-by: Joe Stringer <joe@ovn.org>
Previously, whenever a set_field() action was executed, the entire field
would become masked and the entire field replaced, regardless of the
mask specified in the set_field() action.
In most cases this is fine, although it may lead to more specific
wildcards than strictly necessary. However, in a particular case with
connection tracking actions it could lead to the wrong behaviour.
Unlike most OpenFlow fields, the ct_{mark,labels} fields are typically
unknown until the ct(...,recirc_table=N,...) action is executed however
the packet may actually belong to a connection which has a nonzero value
for one of these fields. This can lead to the wrong behaviour with flows
such as the following:
in_port=1,ip,actions=ct(commit,exec(set_field(0x1/0x1->ct_mark))),2
in_port=2,ip,actions=ct(commit,exec(set_field(0x2/0x2->ct_mark))),1
Connections flowing through these actions will always update the ct_mark
field stored within the conntrack table. However, rather than modifying
only the specified bits (0x1 in one direction, 0x2 in the other), the
entire ct_mark field will be replaced. Such connections will constantly
toggle the value of ct_mark between 0x1 and 0x2, rather than becoming
0x3 and keeping that value.
This commit fixes the issue by ensuring that set_field actions only
modify the modified bits in the wildcards, rather than masking the
entire field.
Fixes: 8e53fe8cf7a1 ("Add connection tracking mark support.")
Fixes: 9daf23484fb1 ("Add connection tracking label support.")
Signed-off-by: Joe Stringer <joe@ovn.org>
Acked-by: Ben Pfaff <blp@ovn.org>
This commit also adds several #include directives in source files in
order to make the 'ofp-util.h' move possible
Signed-off-by: Ben Warren <ben@skyportsystems.com>
Signed-off-by: Ben Pfaff <blp@ovn.org>
This commit also moves some bitmap macros into public header files and
adds some #include directives in soure files in order to make the
'meta-flow.h' move possible.
Signed-off-by: Ben Warren <ben@skyportsystems.com>
Signed-off-by: Ben Pfaff <blp@ovn.org>
