This commit fixes the warning issued by 'clang' when pointer is casted
to one with greater alignment.
Signed-off-by: Alex Wang <alexw@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
This disentangles "struct nl_dump" from "struct nl_sock", clearing the way
to make the use of either one thread-safe in an obviously correct manner.
Signed-off-by: Ben Pfaff <blp@nicira.com>
I am using a userspace OVS, there is a constant ERR message in log:
"dpif_netdev|ERR|error receiving data from ovs-netdev: Message too long"
Check the code and find there is a comparison between ssize_t and size_t type in
netdev_rx_linux_recv(). It makes the negative "retval" greater than the "size".
Change the sequence of comparison to avoid negative return value cast to
a positive and become greater then a non-negative value.
Signed-off-by: ZhengLingyun <konghuarukhr@163.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Commit 796223f5 (netdev: Add new "struct netdev_rx" for capturing packets
from a netdev) refactored send and receive into separate netdevs. As a
result, send and receive now use different socket descriptors (except for tap
interfaces which are treated specially). An unintended side effect was that
all sent packets are looped back and received, which had previously been
avoided as the kernel specifically prevents this from happening on a single
socket descriptor.
To resolve the situation, a socket filter is added to the receive socket
so that it only accepts inbound packets.
Simon Horman co-discovered and initially reported this issue.
Signed-off-by: Murphy McCauley <murphy.mccauley@gmail.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Tested-by: Simon Horman <horms@verge.net.au>
Reviewed-by: Simon Horman <horms@verge.net.au>
netdev_turn_flags_off() does nothing if the flags that one turns off are
already off.
Reported-by: Ethan Jackson <ethan@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Ethan Jackson <ethan@nicira.com>
The distinction between struct netdev_dev and struct netdev has always
been confusing. Now that previous commits have eliminated all interesting
state from struct netdev, this commit deletes it and renames struct
netdev_dev to take its place. Now the situation makes much more sense and
I won't have to continue making embarrassed explanations in the future.
Good riddance.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Separating packet capture from "struct netdev" means that there is no
remaining per-"struct netdev" state, which will allow us to get rid of
"struct netdev_dev" (by renaming it "struct netdev").
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Ethan Jackson <ethan@nicira.com>
This gets rid of the only per-instance data in "struct netdev", which
will make it possible to merge "struct netdev_dev" into "struct netdev" in
a later commit.
Ed Maste wrote the netdev-bsd changes in this commit.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Co-authored-by: Ed Maste <emaste@freebsd.org>
Signed-off-by: Ed Maste <emaste@freebsd.org>
Tested-by: Ed Maste <emaste@freebsd.org>
It's unlikely to fail but checking it can't hurt.
Found by Coverity.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Ethan Jackson <ethan@nicira.com>
This patch removes the final bit of linux specific code which
prevents building netdev-vport everywhere. With this, other
platforms automatically get access to patch ports, and (if their
datapath supports it), flow based tunneling.
Signed-off-by: Ethan Jackson <ethan@nicira.com>
The current method of calculating the ingress policer rate
can lead to inaccuracy if ingress_policing_rate is set to
a smallish values because the rate is divided by 8 first
which causes rounding errors.
Signed-off-by: Thomas Graf <tgraf@redhat.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
This is a straight search-and-replace, except that I also removed #include
<assert.h> from each file where there were no assert calls left.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Ethan Jackson <ethan@nicira.com>
Future patches will need to know the details of a netdev's tunnel
configuration from outside the netdev library.
Signed-off-by: Ethan Jackson <ethan@nicira.com>
The only user of netdev_set_stats() is bonding (for updating the
fake interface). This interface is never a vport, so it seems
quite a bit cleaner to keep the relevant code in the netdev-linux
library where it's needed, instead of in netdev-vport, where it
adds needless complexity.
Signed-off-by: Ethan Jackson <ethan@nicira.com>
An ovs_be32 is a more obvious way to represent an IP address than a
pointer to one. It is also more type-safe, especially since "sparse" is
able to check that the argument is in network byte order.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Ethan Jackson <ethan@nicira.com>
Commit acf608 (ofproto-dpif: Use a single underlying datapath across
multiple bridges.) broke connectivity to userspace datapath devices.
The code assumed the first caller to open a tap device with
netdev_linux_open() wanted to write to it. This commit moves that logic
to when netdev_linux_listen() is called.
Thanks to Ben Pfaff for helping debug the issue.
Signed-off-by: Justin Pettit <jpettit@nicira.com>
Reported-by: Simon Horman <horms@verge.net.au>
Tested-by: Simon Horman <horms@verge.net.au>
The *_get_stats functions call get_stats_via_vport(), which tries to get
information about ports attached to the kernel datapath. When a pure
userspace switch is used (eg, the OVS kernel module isn't loaded), ports
are not attached to a kernel datapath, so warnings get logged. This
commit handles that case and doesn't log a warning. However, if the
kernel datapath is loaded, ports attached to a userspace datapath will
still log a warning.
Signed-off-by: Justin Pettit <jpettit@nicira.com>
On Linux, it is not possible to set the mac address on "up" tap
interfaces. This commit temporarily "down"s the interface so the
address can be set for the netdev_linux_set_etheraddr() call.
Signed-off-by: Justin Pettit <jpettit@nicira.com>
When a link is down, or when a link has no speed because it is not a
physical interface, Open vSwitch previously reported that its rate is 100
Mbps as a default. This is counterintuitive, however, so this commit
changes Open vSwitch behavior to report 0 Mbps when a link is down or its
speed is otherwise unavailable.
Bug #13388.
Reported-by: Hiroshi Tanaka <htanaka@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Casts are sometimes necessary. One common reason that they are necessary
is for discarding a "const" qualifier. However, this can impede
maintenance: if the type of the expression being cast changes, then the
presence of the cast can hide a necessary change in the code that does the
cast. Using CONST_CAST, instead of a bare cast, makes these changes
visible.
Inspired by my own work elsewhere:
http://git.savannah.gnu.org/cgit/pspp.git/tree/src/libpspp/cast.h#n80
Signed-off-by: Ben Pfaff <blp@nicira.com>
A smap is a string to string hash map. It has a cleaner interface
than shash's which were traditionally used for the same purpose.
This patch implements the data structure, and changes netdev and
its providers to use it.
Signed-off-by: Ethan Jackson <ethan@nicira.com>
Replaced all instances of Nicira Networks(, Inc) to Nicira, Inc.
Feature #10593
Signed-off-by: Raju Subramanian <rsubramanian@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
The changes allow the user to specify a separate dscp value for the
controller connection and the manager connection. The value will take
effect on resetting the connections. If no value is specified a default
value of 192 is chosen for each of the connections.
Feature #10074
Requested-by: Rajiv Ramanathan <rramanathan@nicira.com>
Signed-off-by: Mehak Mahajan <mmahajan@nicira.com>
iface_configure_qos() passes a callback to netdev_dump_queues() that can
delete queues. The netdev-linux implementation of this function was
unprepared for the callback to delete queues, so this could cause a
use-after-free. This fixes the problem in netdev_linux_dump_queues() and
documents that netdev_dump_queues() implementations must support deletions
in the callback.
Found by valgrind:
==1593== Invalid read of size 8
==1593== at 0x4A8C43: netdev_linux_dump_queues (hmap.h:326)
==1593== by 0x4305F7: bridge_reconfigure (bridge.c:3084)
==1593== by 0x431384: bridge_run (bridge.c:1892)
==1593== by 0x432749: main (ovs-vswitchd.c:96)
==1593== Address 0x632e078 is 8 bytes inside a block of size 32 free'd
==1593== at 0x4C240FD: free (vg_replace_malloc.c:366)
==1593== by 0x4A4D74: hfsc_class_delete (netdev-linux.c:3250)
==1593== by 0x42AA59: iface_delete_queues (bridge.c:3055)
==1593== by 0x4A8C8C: netdev_linux_dump_queues (netdev-linux.c:1881)
==1593== by 0x4305F7: bridge_reconfigure (bridge.c:3084)
==1593== by 0x431384: bridge_run (bridge.c:1892)
Bug #10164.
Reported-by: Ram Jothikumar <ram@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Following patch adds support for caching error code from ETHTOOL_GSET
call. Since internal device is virtual device device feature does not
make much sense, so netdev_get_features op is removed for internal
devices.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
netdev linux devices uses mtu ioctl to get and set MTU for a device.
By caching error code from ioctl we can reduce number of ioctl calls
for device which is unregistered from system.
netdev notification is used to update mtu which saves get-mtu-ioctl.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Netdev-linux calls ETHTOOL_GDRVINFO on every netdev_linux_get_status()
which is not optimal as drv-info does not change for given device.
So following patch changes netdev_linux_get_status() to read drv-info at
device initialization and cache it.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
"recv" only works for sockets, but tap devices aren't sockets.
Makes the userspace switch work again.
Reported-by: Ravi Kerur <Ravi.Kerur@telekom.com>
Reported-by: 胡靖飞 <hujingfei914@msn.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
The "speed_hi" member was only introduced in 2.6.27, so builds against
older kernel headers failed.
speed_hi is fully backward compatible with older kernels, because older
kernels always set it to 0, so we could easily introduce a compatibility
layer here, but in fact I don't know of any OVS users who have interfaces
faster than 65.5 Gb/s, so it's hardly urgent.
Signed-off-by: Ben Pfaff <blp@nicira.com>
netdev_get_features() and other functions have always used OpenFlow 1.0
"enum ofp_port_features" bits as part of their interface. This commit
switches over to using an internally defined interface that is not tied
directly to any OpenFlow version, making evolution of each side of the
interface easier in the future.
Reviewed-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Most of coverage counters in netdev-linux are counting actual system
calls rather than reads from cached data.
Following patch fixes it by incrementing it after cache check.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
There is no need to retrieve linux system stats for internal devices
as all relevant stats for virtual device like internal device are
already reported by OVS over vport-stats. As a result it also fixes
error stats for internal-devices as they are not counted twice.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Before this patch, every request for a 'netdev_dev''s flags
required an ioctl call. This occurred every time
netdev_get_carrier() was called, which theoretically was very often
if there were a large number of devices. We were already using
netlink to keep track of the IFF_RUNNING flag. This patch
generalizes the code to keep track of all flags using the same
netlink code.
Signed-off-by: Ethan Jackson <ethan@nicira.com>
When a netdev Linux device is created or its netlink cache is
invalidate, it needs an alternative method to update the its
carrier status. Previous patches retrieved this information from a
sysfs file. This patch switches to ioctl which is significantly
simpler, and likely quite a bit faster as well.
Signed-off-by: Ethan Jackson <ethan@nicira.com>
Following patch check if current MTU needs to be changed before
issuing set-mtu ioctl.
Suggested-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
