This doesn't include a dpif implementation of groups functionality. In its
current form, it is untested.
Signed-off-by: Neil Zhu <zhuj@centecnetworks.com>
Co-authored-by: Ben Pfaff <blp@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Co-authored-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Simon Horman <horms@verge.net.au>
Co-authored-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Keep track of usable protocols while parsing actions and matches,
rather than checking for them afterwards. This fixes silently discarded
meter and goto table instructions when not explicitly specifying the
protocol to use.
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
The OFPFF_* flags used in flow_mods are just confusing enough that it
seems worthwhile to try to abstract them out. In particular:
* OFPFF_EMERG was introduced in OF1.0, deleted in OF1.1, and then
its bit was reused for a different purpose in OF1.2.
* OFPFF_RESET_COUNTS was introduced in OF1.2 but the semantics that it
specifies are implied by "add" commands in earlier versions, so
proper translation requires the OpenFlow version number and flow_mod
command.
This commit does the abstraction.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Ethan Jackson <ethan@nicira.com>
GCC 4.6.3 gets confused by the str_to_*() functions in ofp-parse and
spits out the following warning.
error: ‘priority’ may be used uninitialized in this function
Signed-off-by: Ethan Jackson <ethan@nicira.com>
Acked-by: Ben Pfaff <blp@nicira.com>
This commit adds annotations for thread safety check. And the
check can be conducted by using -Wthread-safety flag in clang.
Co-authored-by: Alex Wang <alexw@nicira.com>
Signed-off-by: Alex Wang <alexw@nicira.com>
Signed-off-by: Ethan Jackson <ethan@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Until now, failure to parse a flow in the ofp-parse module has caused the
program to abort immediately with a fatal error. This makes it hard to
use these functions from any long-lived program. This commit fixes the
problem.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Usually the table id in flow mods is 255, which means that goto table
instruction cannot be checked before the table is picked (for flow add),
or the rules to be modified are found (flow mod).
Move goto table checking from decode (ofp-util) to actions checking
(ofp-actions), and postpone the action checking until the table in
which the actions are added is known.
This fixes OFPBRC_BAD_TABLE_ID errors for flow adds that specify the table
id as 255, and have a goto table instruction.
Signed-off-by: Jarno Rajahalme <jarno.rajahalme@nsn.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Until now, datapath ports and openflow ports were both represented by
unsigned integers of various sizes. With implicit conversions, etc., it is
easy to mix them up and use one where the other is expected. This commit
creates two typedefs, ofp_port_t and odp_port_t. Both of these two types
are marked by "__attribute__((bitwise))" so that sparse can be used to
detect any misuse.
Signed-off-by: Alex Wang <alexw@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
I believe this is consistent with the handling of all other action
parsing called from parse_named_action().
Verification of all actions, including learn actions, occurs separately
in ofpact_check__(). It also occurs via in a call to ofpacts_check()
in parse_ofp_str(),
This patch is larger than might otherwise be expected as the flow argument
of learn_parse() is now unused and thus removed. This propagates up the
call-chain some way.
This implementation was suggested by Jesse Gross in response to an
enhancement I made to the validation performed during parsing learn actions
to allow it to correctly account for changes to the dl_type due to MPLS
push and pop actions.
Tests have also been updated to check for the less specific messages
generated by the call to ofpacts_check() in parse_ofp_str() which at the
suggestion of Ben Pfaff was added by a prior patch for this purpose.
Cc: Jesse Gross <jesse@nicira.com>
Cc: Ben Pfaff <blp@nicira.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Add a call to ofpacts_check() in parse_ofp_str() to check pre-requisites.
This is in preparation for removing special-case pre-requisite checking
of learn actions which is useful for the test-suite.
This patch also fixes two tests which this change revealed to be incorrect.
1. Open Flow 1.0 action which sets NXM_NX_IPV6_SRC
without any pre-requisites
This is not valid because there should be an IPv6 pre-requisite.
This portion of the test has been removed as IPv6 pre-requisites are
only valid when using OXM or NXM, however the test appears
to be a (non-NXM) Open Flow 1.0 test.
It has been replaced with a similar test of an action
that sets the IPv4 source address.
2. Open Flow 1.2 action which sets NXM_NX_IPV6_SRC
without any pre-requisites.
This is not valid because there should be an IPv6 pre-requisite.
This test has been corrected by adding IPv6 as a pre-requisite,
which is valid for Open Flow 1.2 as it uses OXM.
Use of ofpacts_check() in parse_ofp_str() suggested by Ben Pfaff.
Cc: Ben Pfaff <blp@nicira.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Define a new NXAST_SAMPLE OpenFlow vendor action and the corresponding
OFPACT_SAMPLE OVS action, to do per-flow packet sampling, translated
into a new SAMPLE "flow_sample" dp action.
Make the userspace action's userdata size vary depending on the union
member used. Add a new "flow_sample" upcall to do per-flow packet
sampling. Add a new "ipfix" upcall to do per-bridge packet sampling
to IPFIX collectors.
Extend the OVSDB schema to support configuring IPFIX collector sets.
Add support for configuring multiple IPFIX collectors for per-flow
packet sampling. Add support for configuring per-bridge IPFIX
sampling.
Automatically generate standard IPFIX entity definitions from the IANA
specs. Send one IPFIX data record message for every packet sampled by
an OpenFlow sample action or received by a bridge configured with
IPFIX sampling, and periodically send IPFIX template set messages.
Signed-off-by: Romain Lenglet <rlenglet@vmware.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
The Push action takes a single parameter. Any source allowed by NXAST_REG_MOVE
is allowed to be pushed onto the stack. When the source is a bit field,
its value will be right shifted to bit zero before being pushed onto the
stack. The remaining bits will be set to zero.
The Pop action also takes a single parameter. Any destination allowed by
NXAST_REG_MOVE can be used as the destination of the action. The value, in
case of a bit field, will be taken from top of the stack, starting from
bit zero.
The stack size is not limited. The initial 8KB is statically allocated to
efficiently handle most common use cases. When more stack space is
required, the stack can grow using malloc().
Signed-off-by: Andy Zhou <azhou@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
This adds support for the OpenFlow 1.1+ set_mpls_ttl action.
And also adds an NX set_mpls_ttl action.
The handling of the TTL modification is entirely handled in userspace.
Reviewed-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Ben Pfaff <blp@nicira.com>
This adds support for the OpenFlow 1.1+ dec_mpls_ttl action.
And also adds an NX dec_mpls_ttl action.
The handling of the TTL modification is entirely handled in userspace.
Reviewed-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Ben Pfaff <blp@nicira.com>
The autopath action was attempting to achieve functionality similar
to the bundle action, but was significantly clunkier, more
difficult to understand, more difficult to use, and less reliable.
This patch removes it.
Signed-off-by: Ethan Jackson <ethan@nicira.com>
This patch implements use-space datapath and non-datapath code
to match and use the datapath API set out in Leo Alterman's patch
"user-space datapath: Add basic MPLS support to kernel".
The resulting MPLS implementation supports:
* Pushing a single MPLS label
* Poping a single MPLS label
* Modifying an MPLS lable using set-field or load actions
that act on the label value, tc and bos bit.
* There is no support for manipulating the TTL
this is considered future work.
The single-level push pop limitation is implemented by processing
push, pop and set-field/load actions in order and discarding information
that would require multiple levels of push/pop to be supported.
e.g.
push,push -> the first push is discarded
pop,pop -> the first pop is discarded
This patch is based heavily on work by Ravi K.
Cc: Ravi K <rkerur@gmail.com>
Reviewed-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Ben Pfaff <blp@nicira.com>
It should be possible to feed to output of "ovs-ofctl dump-flows" to
"ovs-ofctl add-flows". However, some of the metadata needs to be
ignored. "idle_age" and "hard_age" was recently added to the output of
"ovs-ofctl dump-flows", but they were not ignored like the other
metadata. This commit ignores them.
Signed-off-by: Justin Pettit <jpettit@nicira.com>
All datapath flows should have an in_port, so it doesn't make a lot
of sense to allow omitting it when tracing. If a user wants to
trace a flow which has no in_port, they can use the OpenFlow syntax
which doesn't go through ofproto_receive().
Signed-off-by: Ethan Jackson <ethan@nicira.com>
Initial OpenFlow 1.3 support with new include/openflow/openflow-1.3.h.
Most of the messages that differ from 1.2 are implemented. OFPT_SET_ASYNC
is implemented via NX_SET_ASYNC_CONFIG, other new message types are yet to
be implemented. Stats replies that add duration fields are implemented at
encode/decode level only. Test cases for implemented features are included.
Remaining FIXME:s should not cause runtime aborts. Make check comes out
clean.
Signed-off-by: Jarno Rajahalme <jarno.rajahalme@nsn.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Add OFPP_ANY to include/openflow/openflow-1.1.h, and allow it as a port in
queue stats request. Make ovs_ofctl use OFPP_ANY instead of OFPP_ALL for queue
stats requests on OF 1.1+.
This patch changes "none" ports print out. "none" is still accepted on input
for backwards compatibility, but it prints out as "ANY". To make this less
confusing, I changed the test cases to use "controller" or "any" instead of
"none". The test case that tests for both "none" and "controller" still tests
for them.
Signed-off-by: Jarno Rajahalme <jarno.rajahalme@nsn.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
With this commit, OVS will match the data in the RARP packets having
ethertype 0x8035, in the same way as the data in the ARP packets.
Signed-off-by: Mehak Mahajan <mmahajan@nicira.com>
This implementes push_vlan with 802.1Q.
NOTE: 802.1AD (QinQ) is not supported. It requires another effort.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Ben Pfaff <blp@nicira.com>
In OpenFlow 1.1, we add support for OFPIT_WRITE_METADATA. This allows us to
write to the metadata field. Internally it is represented using ofpact_metadata.
We introduce NXAST_WRITE_METADATA to handle writing to the metadata field in
OpenFlow 1.0+. This structure reflects OFPIT_WRITE_METADATA.
When writing out the structure to OpenFlow 1.1, it uses the OFPIT_WRITE_METADATA
instruction only, and not the new NXAST action (which would be redundant).
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Ben Pfaff <blp@nicira.com>
When "dec_ttl" is specified as the name of an action, in OpenFlow 1.1 and
later we should prefer to use the standardized action, rather than the
Nicira extension.
Reported-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Reviewed-by: Isaku Yamahata <yamahata@valinux.co.jp>
OFPUTIL_OFPAT11_DEC_NW_TTL does not have a name in the table of actions'
names, so this code in parse_named_action() can never be reached.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Reviewed-by: Isaku Yamahata <yamahata@valinux.co.jp>
This patch adds support of OF11+ pop_vlan.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
[blp@nicira.com added a test]
Signed-off-by: Ben Pfaff <blp@nicira.com>
When I wrote this function I didn't think that port 0 was important (it's
not a valid OpenFlow port number) so I used a return value of 0 to indicate
an error. However, my assumption turns out to be wrong, so this commit
changes the interface to use the return value only for error reporting
and store the parsed port number into a pointer passed in as a parameter.
This commit doesn't change the behavior of ofputil_port_from_string().
Signed-off-by: Ben Pfaff <blp@nicira.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
[blp@nicira.com changed code to use "dec_ttl" instead of "dec_nw_ttl"]
Signed-off-by: Ben Pfaff <blp@nicira.com>
Based heavily on work by Isaku Yamahata <yamahata@valinux.co.jp>
Cc: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Simon Horman <horms@verge.net.au>
[blp@nicira.com adjusted documentation, added test]
Signed-off-by: Ben Pfaff <blp@nicira.com>
OpenFlow 1.0 has special reserved ports in the range 0xfff8 to 0xffff.
OpenFlow 1.1 and later has the same ports in the range 0xfffffff8 to
0xffffffff and allows the OF1.0 range to be used for ordinary ("physical")
switch ports. This means that, naively, the meaning of a port number in
the range 0xfff8 to 0xffff given on the ovs-ofctl command line depends on
the protocol in use. This commit implements something a little smarter:
- Accept keyword names (e.g. LOCAL) for special reserved ports
everywhere that such a port can plausibly be used (previously they
were only accepted in some places).
- Translate 0xfff8...0xffff to 0xfffffff8...0xffffffff for now, since
OF1.1+ isn't in widespread use and those particular ports aren't
likely to be in use in OF1.1+ anyway.
- Log warnings about those ports when they are specified by number, to
allow users to fix their invocations.
Also:
- Accept the OF1.1+ port numbers for these ports, without warning, for
compatibility with the upcoming OF1.1+ support.
- Stop accepting port number 0, which has never been a valid port
number in OpenFlow 1.0 and later. (This required fixing some tests
that inadvertently used this port number).
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Simon Horman <horms@verge.net.au>
Add necessary macros to ofp-util for OF12 support.
This is just a placeholder.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Ben Pfaff <blp@nicira.com>
The autopath action is an obsolete attempt to replicate
functionality contained in the bundle action. It is ugly and of
questionable usefulness. This patch deprecates it and schedules
its removal for February 2013. If there are concerns, please email
dev@openvswitch.org.
Signed-off-by: Ethan Jackson <ethan@nicira.com>
Currently, if a controller having a nonzero id registers to get a
OFPR_INVALID_TTL async message, it will not receive it. This is because
compose_dec_ttl() only sent the invalid ttl packets to the default controller
id. NXAST_DEC_TTL_CNT_IDS is a new action that accepts a list of controller
ids, each separated by `,', to which the OFPR_INVALID_TTL packets must be sent.
The earlier requirement of the controller having to explicitly register to
receive these asynchronous messages is retained.
The syntax of this action is:
dec_ttl(id1,id2)
where id1, id2 are valid controller ids.
Signed-off-by: Mehak Mahajan <mmahajan@nicira.com>
OpenFlow switching monitoring and controller coordination can be made more
efficient if the switch can notify a controller of flow table changes as
they occur, rather than periodically polling for changes. This commit
implements such a feature.
Feature #6633.
CC: Natasha Gude <natasha@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
So far, only the Apply-Actions instruction is supported, and only
actions that have identical semantics to OpenFlow 1.0 actions.
Co-authored-by: Simon Horman <horms@verge.net.au>
Co-authored-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Ben Pfaff <blp@nicira.com>
OpenFlow actions have always been somewhat awkward to handle.
Moreover, over time we've started creating actions that require more
complicated parsing. When we maintain those actions internally in
their wire format, we end up parsing them multiple times, whenever
we have to look at the set of actions.
When we add support for OpenFlow 1.1 or later protocols, the situation
will get worse, because these newer protocols support many of the same
actions but with different representations. It becomes unrealistic to
handle each protocol in its wire format.
This commit adopts a new strategy, by converting OpenFlow actions into
an internal form from the wire format when they are read, and converting
them back to the wire format when flows are dumped. I believe that this
will be more maintainable over time.
Thanks to Simon Horman and Pravin Shelar for reviews.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Possibly the ofputil_decode_action() interface should be rethought now
that ofputil_action_code has an invalid value.
Reviewed-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Commit e72e793 (Add ability to restrict flow mods and flow stats
requests to cookies.) modified cookie handling. Some of its behavior
was unintuitive and there was at least one bug (described below).
Commit f66b87d (DESIGN: Document uses for flow cookies.) attempted to
document a clean design for cookie handling. This commit updates the
DESIGN document and brings the implementation in line with it.
In commit e72e793, the code that handled processing OpenFlow flow
modification requests set the cookie mask to exact-match. This seems
reasonable for adding flows, but is not correct for matching, since
OpenFlow 1.0 doesn't support matching based on the cookie. This commit
changes to cookie mask to fully wildcarded, which is the correct
behavior for modifications and deletions. It doesn't cause any problems
for flow additions, since the mask is ignored for that operation.
Bug #9742
Reported-by: Luca Giraudo <lgiraudo@nicira.com>
Reported-by: Paul Ingram <paul@nicira.com>
Signed-off-by: Justin Pettit <jpettit@nicira.com>
