Add DPIF-level infrastructure for meters. Allow meter_set to modify
the meter configuration (e.g. set the burst size if unspecified).
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Signed-off-by: Andy Zhou <azhou@ovn.org>
Currently we parse the 'other_config' column in Openvswitch table in
bridge.c. We extract the values (just 'pmd-cpu-mask' for now) and we
pass them down to the datapath, via different layers.
If we want to pass other values to dpif-netdev.c (like we recently
discussed) we would have to touch ofproto.c, ofproto-dpif.c and dpif.c.
This patch sends the entire other_config column to dpif-netdev, so that
dpif-netdev can extract the values it's interested in.
No functional change.
Signed-off-by: Daniele Di Proietto <diproiettod@vmware.com>
Acked-by: Ben Pfaff <blp@ovn.org>
bridge_delete_or_reconfigure() deletes every interface that's not dumped
by OFPROTO_PORT_FOR_EACH(). ofproto_dpif.c:port_dump_next(), used by
OFPROTO_PORT_FOR_EACH, checks if the ofport is in the datapath by
calling port_query_by_name(). If port_query_by_name() returns an error,
the dump is interrupted. If port_query_by_name() returns ENODEV, the
device doesn't exist and the dump can continue.
port_query_by_name() for the userspace datapath returns ENOENT instead
of ENODEV. This is expected by dpif_port_query_by_name(), but it's not
handled correctly by port_dump_next().
dpif-netdev handles reconfiguration errors for an interface by deleting
it from the datapath, so it's possible that a device is missing. When this
happens we must make sure that port_dump_next() continues to dump other
devices, otherwise they will be deleted and the two layers will have an
inconsistent view.
This commit fixes the problem by returning ENODEV from the userspace
datapath if the port doesn't exist, and by documenting this clearly in
the dpif interfaces.
The problem was found while developing new code.
Signed-off-by: Daniele Di Proietto <diproiettod@vmware.com>
Acked-by: Ben Pfaff <blp@ovn.org>
The implementations these days use ODPP_NONE rather than UINT32_MAX.
Signed-off-by: Joe Stringer <joe@ovn.org>
Acked-by: Simon Horman <simon.horman@netronome.com>
This commit adds functionality to pass value of 'other_config' column
of 'Interface' table to datapath.
This may be used to pass not directly connected with netdev options and
configure behaviour of the datapath for different ports.
For example: pinning of rx queues to polling threads in dpif-netdev.
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Acked-by: Daniele Di Proietto <diproiettod@vmware.com>
Currently, all of the PMD netdevs can only have the same number of
rx queues, which is specified in other_config:n-dpdk-rxqs.
Fix that by introducing of new option for PMD interfaces: 'n_rxq', which
specifies the maximum number of rx queues to be created for this
interface.
Example:
ovs-vsctl set Interface dpdk0 options:n_rxq=8
Old 'other_config:n-dpdk-rxqs' deleted.
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Acked-by: Ben Pfaff <blp@ovn.org>
Acked-by: Flavio Leitner <fbl@sysclose.org>
Signed-off-by: Daniele Di Proietto <diproiettod@vmware.com>
This function will flush the connection tracking tables of a specific
datapath.
It simply calls a function pointer in the dpif_class. No dpif
currently implements the required interface.
The next commits will provide an implementation in dpif-netlink.
Signed-off-by: Daniele Di Proietto <diproiettod@vmware.com>
Acked-by: Joe Stringer <joe@ovn.org>
These function can be used to dump conntrack entries from a datapath.
They simply call a function pointer in the dpif_class. No dpif currently
implements the interface.
The next commits will provide an implementation in dpif-netlink.
Signed-off-by: Daniele Di Proietto <diproiettod@vmware.com>
Acked-by: Joe Stringer <joe@ovn.org>
When dpdk configuration changes, all pmd threads are recreated
and rx queues of each port are reloaded. After this process,
rx queue could be mapped to a different pmd thread other than
the one before reconfiguration. However, this is totally
transparent to ofproto layer modules. So, if the ofproto-dpif-upcall
module still holds ukeys generated before pmd thread recreation,
this old ukey will collide with the ukey for the new upcalls
from same traffic flow, causing flow installation failure.
To fix the bug, this commit adds a new call-back function
in dpif layer for notifying upper layer the purging of datapath
(e.g. pmd thread deletion in dpif-netdev). So, the
ofproto-dpif-upcall module can react properly with deleting
the ukeys and with collecting flows' last stats.
Reported-by: Ilya Maximets <i.maximets@samsung.com>
Signed-off-by: Alex Wang <ee07b291@gmail.com>
Acked-by: Daniele Di Proietto <diproiettod@vmware.com>
Tested-by: Daniele Di Proietto <diproiettod@vmware.com>
Acked-by: Joe Stringer <joestringer@nicira.com>
This init function is called when the dpif class is registered. It will
be used by following commits
Signed-off-by: Daniele Di Proietto <diproiettod@vmware.com>
Acked-by: Ethan Jackson <ethan@nicira.com>
Previously, the dpif layer was responsible for determining datapath
support for UFIDs, which resulted in all ovs-dpctl utilities
inserting/deleting flows from the datapath each time they are run.
Shift this responsibility up to the dpif_backer.
There are two users of this functionality: Revalidators check for UFID
support to request a terser dump using UFIDs, and dpif-netlink uses this
to request flow_del operations to only return the UFID/stats. The latter
case was previously hidden from revalidators, but this change makes them
aware of it, and reuses the same "udpif->enable_ufid" flag for reducing
overhead of both flow dump and flow delete.
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Andy Zhou <azhou@nicira.com>
One of the limiting factors on the number of flows that can be supported
in the datapath is the overhead of assembling flow dump messages in the
datapath. This patch modifies the dpif to allow revalidators to skip
dumping the key, mask and actions from the datapath, by making use of
the unique flow identifiers introduced in earlier patches.
For each flow dump, the dpif user specifies whether to skip these
attributes, allowing the common case to only dump a pair of 128-bit ID
and flow stats. With datapath support, this increases the number of
flows that a revalidator can handle per second by 50% or more. Support
in dpif-netdev and dpif-netlink is added in this patch; kernel support
is left for future patches.
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Ben Pfaff <blp@nicira.com>
Following patch adds support for userspace tunneling. Tunneling
needs three more component first is routing table which is configured by
caching kernel routes and second is ARP cache which build automatically
by snooping arp. And third is tunnel protocol table which list all
listening protocols which is populated by vswitchd as tunnel ports
are added. GRE and VXLAN protocol support is added in this patch.
Tunneling works as follows:
On packet receive vswitchd check if this packet is targeted to tunnel
port. If it is then vswitchd inserts tunnel pop action which pops
header and sends packet to tunnel port.
On packet xmit rather than generating Set tunnel action it generate
tunnel push action which has tunnel header data. datapath can use
tunnel-push action data to generate header for each packet and
forward this packet to output port. Since tunnel-push action
contains most of packet header vswitchd needs to lookup routing
table and arp table to build this action.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Jarno Rajahalme <jrajahalme@nicira.com>
Acked-by: Thomas Graf <tgraf@noironetworks.com>
Acked-by: Ben Pfaff <blp@nicira.com>
OVS userspace are backward compatible with older Linux kernel modules.
However, not having the most up-to-date datapath kernel modules can
some times lead to user confusion. Storing the datapath version in
OVSDB allows management software to check and optionally provide
notifications to users.
Signed-off-by: Andy Zhou <azhou@nicira.com>
Acked-by: Ben Pfaff <blp@nicira.com>
This commits adds the multithreading functionality to OVS dpdk
module. Users are able to create multiple pmd threads and set
their cpu affinity via specifying the cpu mask string similar
to the EAL '-c COREMASK' option.
Also, the number of rx queues for each dpdk interface is made
configurable to help distribution of rx packets among multiple
pmd threads.
Signed-off-by: Alex Wang <alexw@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
The patch contains the necessary modifications to compile and also to run
under MSVC.
Added the files to the build system and also changed dpif_linux to be under
a more generic name dpif_windows.
Added a TODO under the windows part in case we want to implement another
counterpart for epoll functions.
Signed-off-by: Alin Gabriel Serdean <aserdean@cloudbasesolutions.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
This patch avoids the relatively inefficient miss handling processes
dictated by the dpif process, by calling into ofproto-dpif directly
through a callback.
Signed-off-by: Ethan Jackson <ethan@nicira.com>
Acked-by: Ben Pfaff <blp@nicira.com>
This cleans up the dpif interface to make it more consistent with the
other dpif operations, and allows flows to be fetched in batches.
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Ben Pfaff <blp@nicira.com>
The dpif provider 'operate' call duplicates all of the features available
from the 'flow_put', 'flow_del', and 'execute' calls, yielding redundant
code in providers that support both mechanisms. This change drops the
latter calls in favor of making every dpif provider support 'operate'.
The result is code that is overall less duplicative.
It might make sense to do the same with flow_get but so far 'operate'
doesn't support flow_get.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Typically, kernel datapath threads send upcalls to userspace where
handler threads process the upcalls. For TAP and DPDK devices, the
datapath threads operate in userspace, so there is no need for
separate handler threads.
This patch allows userspace datapath threads to directly call the
ofproto upcall functions, eliminating the need for handler threads
for datapaths of type 'netdev'.
Signed-off-by: Ryan Wilson <wryan@nicira.com>
Signed-off-by: Ethan Jackson <ethan@nicira.com>
Acked-by: Ethan Jackson <ethan@nicira.com>
The userspace datapath returns RCU-protected actions from flow_get() and
flow_dump_next(). This doesn't cause any trouble for current users of
these functions, but it imposes additional constraints on their use.
This patch makes the dpif documentation more explicit about how the
results of these functions can be used.
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Ben Pfaff <blp@nicira.com>
Change the interface to allow implementations to pass back a buffer, and
allow callers to specify which of actions, mask, and stats they wish to
receive. This will be used in the next commit.
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Ben Pfaff <blp@nicira.com>
Since dpif_netdev_enumerate() is used for "netdev" and "dummy" class, it
incorrectly lists dpif-netdevs as "dummy" and vice versa.
This patches address the issue by changing the dpif-provider interface: a
dpif_class parameter is passed to the 'enumerate' call to match the right class.
Signed-off-by: Daniele Di Proietto <ddiproietto@vmware.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Commit a6ce4b9d25 (ofproto-dpif-upcall: Avoid use-after-free in
revalidate() corner case.) showed that it is somewhat tricky to correctly
use the existing dpif flow dumping interface to obtain batches of flows.
One has to be careful about calling dpif_flow_dump_next_may_destroy_keys()
before going on to the next flow.
A better interface is possible, one that is naturally oriented toward
retrieving batches when that is a useful optimization. This commit
replaces the dpif interface by such a design, and updates both the
implementations and the callers to adopt it.
This is a fairly large change, but I think that the code in
ofproto-dpif-upcall is easier to understand after the change.
Signed-off-by: Ben Pfaff <blp@nicira.com>
This commit changes the API in 'dpif-provider.h' to allow multiple
handler threads call dpif_recv() simultaneously.
Signed-off-by: Alex Wang <alexw@nicira.com>
Acked-by: Ben Pfaff <blp@nicira.com>
This new function allows callers to determine whether previously
returned keys will be modified or reallocated on the next call to
dpif_flow_dump_next(). This will be used in a future commit to allow
batched flow deletion by revalidator threads.
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
This patch makes it the caller's responsibility to initialize a
per-thread 'state' object and pass it down to the dpif_flow_dump_next()
implementation. The implementation can expect to be called from multiple
threads with the same 'iter' and different 'state' objects.
When flow_dump_next() returns non-zero, the implementation must ensure
that subsequent calls with the same arguments also return non-zero.
Subsequent calls with the same 'iter' and different 'state' may return
zero, but should make progress towards returning non-zero.
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
This patch separates the structures for thread-local flow dump state
("state") from the shared flow dump state ("iter") in dpif-linux and
dpif-netdev. Future patches will make use of this to allow multiple
threads to dump flows from the same flow dump operation.
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
This helps reduce confusion about when a flow is a flow and when it is
just metadata.
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Acked-by: Ben Pfaff <blp@nicira.com>
Commit da546e0 (dpif: Allow execute to modify the packet.) uninitializes
the "dpif_upcall.packet" of "struct upcall" when dpif_recv() returns error.
The packet ofpbuf is likely uninitialized in this case, hence calling
ofpbuf_uninit() on it will likely cause a SEGFAULT.
This commit fixes this bug by only uninitializing packet's ofpbuf on
successfully received upcalls.
A note warning about this is added on the comment of dpif_recv() in
dpif.c and dpif-provider.h.
Reported-by: Alex Wang <alexw@nicira.com>
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Acked-by: Ben Pfaff <blp@nicira.com>
Allowing the packet to be modified by execution allows less data
copying for userspace action execution. Some users of the
dpif_execute already expect that the packet may be modified. This
patch makes this behavior uniform and makes the userspace datapath and
the execution helpers modify the packet as it is being executed.
Userspace action now steals the packet if given permission, as the
packet is normally not needed after it. The only exception is the
sample action, and this is accounted for my keeping track of any
actions that could be following the userspace action.
The packet in dpif_upcall is changed from a pointer to a struct,
allowing the packet to be honest about it's headroom. After this
change the packet can safely be pushed on over the precarious 4 byte
limit earlier allowed by the netlink data preceding the packet.
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Acked-by: Ben Pfaff <blp@nicira.com>
The declaration of 'get_max_ports()' to return odp_port_t adds
unwanted complexity to coding. This commit changes it back to
return uint32_t type.
Signed-off-by: Alex Wang <alexw@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Until now, datapath ports and openflow ports were both represented by
unsigned integers of various sizes. With implicit conversions, etc., it is
easy to mix them up and use one where the other is expected. This commit
creates two typedefs, ofp_port_t and odp_port_t. Both of these two types
are marked by "__attribute__((bitwise))" so that sparse can be used to
detect any misuse.
Signed-off-by: Alex Wang <alexw@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Added support to allow mega flow specified and displayed. ovs-dpctl tool
is mainly used as debugging tool.
This patch also implements the low level user space routines to send
and receive mega flow netlink messages. Those netlink suppor
routines are required for forthcoming user space mega flow patches.
Added a unit test to test parsing and display of mega flows.
Ethan contributed the ovs-dpctl mega flow output function.
Co-authored-by: Ethan Jackson <ethan@nicira.com>
Signed-off-by: Ethan Jackson <ethan@nicira.com>
Signed-off-by: Andy Zhou <azhou@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
This is a straight search-and-replace, except that I also removed #include
<assert.h> from each file where there were no assert calls left.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Ethan Jackson <ethan@nicira.com>
Depending on the port and type of datapath, a port may need to be opened
as a different type of device than it's configured. For example, an
"internal" port on a "dummy" datapath should opened as a "dummy" port.
This commit adds the ability for a dpif to provide this information to a
caller. It will be used in a future commit.
Signed-off-by: Justin Pettit <jpettit@nicira.com>
Provide the ability to determine whether a port exists in a datapath
without having to deal with a "dpif_port" structure as with
dpif_port_query_by_name(). A future patch will use this function.
Signed-off-by: Justin Pettit <jpettit@nicira.com>
Most of the code referred to datapath ports as 32-bit values, but a few
places still used 16-bit references.
Signed-off-by: Justin Pettit <jpettit@nicira.com>
Soon the kernel will begin supplying the information about the outer
IP header for tunneled packets and userspace will need to be able to
track it as part of the flow. For the time being this is only used
internally by OVS and not exposed outwards to OpenFlow. As a result,
this threads the information throughout userspace but simply stores
the existing tun_id in it.
Signed-off-by: Jesse Gross <jesse@nicira.com>
The datapath allows requesting a specific port number for a port, but
the dpif interface didn't expose it. This commit adds that support.
Signed-off-by: Justin Pettit <jpettit@nicira.com>
Until now, packets for these special protocols have been mixed with general
traffic in the kernel-to-userspace queues. This means that a big-enough
storm of new flows in these queues can cause packets for these special
protocols to be dropped at this interface, fooling userspace into believing
that, say, no CFM packets have been received even though they are arriving
at the expected rate.
This commit moves special protocols to a dedicated kernel-to-userspace
queue to avoid the problem.
Bug #7550.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Replaced all instances of Nicira Networks(, Inc) to Nicira, Inc.
Feature #10593
Signed-off-by: Raju Subramanian <rsubramanian@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Until now, a "flow put" has represented its parameters in two different
ways, depending on whether it was coming from dpif_flow_put() or from
dpif_operate(), and similarly for an "execute" operation. This commit
adopts the operation struct consistently within the dpif provider
interface, which seems cleaner.
This commit also factors out logging for flow puts and executes, which
is useful in the following commit.
This doesn't change the dpif client interface, since the two forms are
more convenient for clients than always filling out an operation struct.
Signed-off-by: Ben Pfaff <blp@nicira.com>
I'd like to change ->dpif_flow_put() and ->dpif_execute() in the dpif
provider to take the structures of the same names as parameters, instead of
passing them discrete parameters, because this seems like a more sensible
way to do things internally than to have two different ways to pass the
parameters. It might even simplify code slightly. But ->flow_put() and
->execute() wouldn't want the 'type' (because it's implied by the function
being called) or 'error' (because it would be the same as the return
value). Although of course they could just ignore those members, it seems
slightly cleaner to omit them entirely, as this change allows.
Signed-off-by: Ben Pfaff <blp@nicira.com>
At one point in the past, there were three separate queues between the
kernel module and OVS userspace, each of which corresponded to a Netlink
socket (or, before that, to a character device). It made sense to allow
each of these to be enabled or disabled separately, hence the "listen mask"
concept in the dpif layer.
These days, the concept is much less clear-cut. Queuing is no longer on
the basis of different classes of packets but instead striped across a
collection of sockets based on input port. It doesn't really make sense
to enable receiving packets on the basis of the kind of packet anymore.
Accordingly, this commit simplifies the "listen_mask" to just a bool that
either enables or disables receiving packets.
It could be useful to enable or disable receiving packets on a per-vport
basis, but the rest of the code isn't ready to make use of that so this
commit doesn't generalize this much.
Based on this discussion on ovs-dev:
http://openvswitch.org/pipermail/dev/2011-October/012044.html
Signed-off-by: Ben Pfaff <blp@nicira.com>
