This code path currently does not initialize
netdev_class_mutex.
dummy_enable
->netdev_dummy_register
->netdev_register_provider
->ovs_mutex_lock(&netdev_class_mutex)
ovsdb-server on windows crashes without it.
This commit adds a new initialization function.
Signed-off-by: Gurucharan Shetty <gshetty@nicira.com>
Acked-by: Ben Pfaff <blp@nicira.com>
This commit can be seen as a partial revert of commit
da4a619179d (netdev: Globally track port status changes)
by adding the 'change_seq' to 'struct netdev'.
Signed-off-by: Alex Wang <alexw@nicira.com>
Acked-by: Ben Pfaff <blp@nicira.com>
Following patch adds DPDK netdev-class to userspace datapath. Now
OVS can use DPDK port for IO by just configuring DPDK port and then
adding dpdk type port to userspace datapath.
Refer to INSTALL.DPDK doc for further info.
This is based a patch from Gerald Rogers.
Signed-off-by: Gerald Rogers <gerald.rogers@intel.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Thomas Graf <tgraf@redhat.com>
new netdev type like DPDK can support multi-queue IO. Following
patch Adds support for same.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Thomas Graf <tgraf@redhat.com>
Preparation for multi queue netdev IO. There are no functional changes
in this patch.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Thomas Graf <tgraf@redhat.com>
This patch adds PMD type netdev for netdevice with poll-mode
drivers. Since there is no way to get signal on a packet recv
from these devices we need to poll them in busy loop. So minimize
system call overhead this patch uses dpif-thread exclusively
for PMD devices and rest of devices which needs system calls to
do IO are moved to dpif-netdev-run().
PMD device like DPDK work in userspace so there is no system call
overhead for them.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Thomas Graf <tgraf@redhat.com>
DPDK netdev need to access ofpbuf while sending buffer. Following
patch changes netdev_send accordingly.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Thomas Graf <tgraf@redhat.com>
DPDK can receive multiple packets but current netdev API does
not allow that. Following patch allows dpif-netdev receive batch
of packet in a rx_recv() call for any netdev port. This will be
used by dpdk-netdev.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
None of the atomic implementations need a destroy function anymore, so it's
"more standard" and more convenient for users to get rid of them.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Andy Zhou <azhou@nicira.com>
The LINUX_DATAPATH C preprocessor symbol was originally meant to be used as
a signal for whether the Linux datapath module could be used, but it was
used as a proxy for a lot of other stuff that is really just Linux
specific. This commit switches all of these users to just test for
__linux__, which is more straightforward and should have the same result.
CC: Luigi Rizzo <rizzo@iet.unipi.it>
Signed-off-by: Ben Pfaff <blp@nicira.com>
With glibc, rwlocks by default allow recursive read-locking even if a
thread is blocked waiting for the write-lock. POSIX allows such attempts
to deadlock, and it appears that the libc used in NetBSD, at least, does
deadlock. The netdev_class_rwlock is in fact acquired recursively in this
way, which is a bug. This commit fixes the problem by switching to a
recursive mutex. This allows for less parallelism, but according to an
existing comment that doesn't matter here anyway.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Joe Stringer <joestringer@nicira.com>
If VLAN acceleration is used when the kernel receives a packet
then the outer-most VLAN tag will not be present in the packet
when it is received by netdev-linux. Rather, it will be present
in auxdata.
This patch uses recvmsg() instead of recv() to read auxdata for
each packet and if the vlan_tid is set then it is added to the packet.
Adding the vlan_tid makes use of headroom available
in the buffer parameter of rx_recv.
Signed-off-by: Simon Horman <horms@verge.net.au>
Co-authored-by: Ben Pfaff <blp@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Update the netdev_class so that struct ofpbuf * is passed to rx_recv()
to provide both the data and size of the data to read a packet into.
On success, update struct ofpbuf size inside netdev_class rx_recv
implementation and return 0. This moves logic from the caller.
On error a positive error code is returned, whereas previously
a negative error code was returned. This is a more common convention.
This patch should not have any behavioural changes.
This patch is in preparation for the netdev-linux variant of rx_recv()
making use of headroom in the struct ofpbuf * parameter to push a VLAN tag
obtained from auxdata.
Signed-off-by: Simon Horman <horms@verge.net.au>
Co-authored-by: Ben Pfaff <blp@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Previously, we tracked status changes for ofports on a per-device basis.
Each time in the main thread's loop, we would inspect every ofport
to determine whether the status had changed for corresponding devices.
This patch replaces the per-netdev change_seq with a global 'struct seq'
which tracks status change for all ports. In the average case where
ports are not constantly going up or down, this allows us to check the
sequence once per main loop and not poll any ports. In the worst case,
execution is expected to be similar to how it is currently.
In a test environment of 5000 internal ports and 50 tunnel ports with
bfd, this reduces average CPU usage of the main thread from about 40% to
about 35%.
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Signed-off-by: Ethan Jackson <ethan@nicira.com>
Acked-by: Ethan Jackson <ethan@nicira.com>
We have a call chain like this:
iface_configure_qos() calls
netdev_dump_queues(), which calls
netdev_linux_dump_queues(), which calls back through 'cb' to
qos_unixctl_show_cb(), which calls
netdev_delete_queue(), which calls
netdev_linux_delete_queue().
Both netdev_dump_queues() and netdev_linux_delete_queue() take the same
mutex in the same netdev, which deadlocks.
This commit fixes the problem by getting rid of the callback.
netdev_linux_dump_queue_stats() would benefit from the same treatment but
it's less urgent because I don't see any callbacks from that function that
call back into a netdev function.
Bug #19319.
Reported-by: Scott Hendricks <shendricks@vmware.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
This is the same lifecycle used in the ofproto provider interface.
Compared to the previous netdev provider interface, it has the
advantage that the netdev top layer can control when any given
netdev becomes visible to the outside world.
Signed-off-by: Ben Pfaff <blp@nicira.com>
This API change is necessary for thread safety, to be added in an upcoming
commit. Otherwise, the client would not be able to safely use the returned
netdev because it could already have been destroyed.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Andy Zhou <azhou@nicira.com>
This API change is necessary for thread safety, to be added in an upcoming
commit. Otherwise, the client would not be able to actually use any of
the returned netdevs because they could already have been destroyed.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Andy Zhou <azhou@nicira.com>
I suspect that this makes it easier to make sure that a netdev stays open
as long as needed in some cases where a module needs access to a netdev
opened by some higher-level module.
CC: Ethan Jackson <ethan@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
This commit adds a function to lib/netdev.c to check that the interface name
is not the same as any of the registered vport providers' dpif_port name
(e.g. gre_system) or the datapath's internal port name (e.g. ovs-system).
Bug #15077.
Signed-off-by: Alex Wang <alexw@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
The distinction between struct netdev_dev and struct netdev has always
been confusing. Now that previous commits have eliminated all interesting
state from struct netdev, this commit deletes it and renames struct
netdev_dev to take its place. Now the situation makes much more sense and
I won't have to continue making embarrassed explanations in the future.
Good riddance.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Separating packet capture from "struct netdev" means that there is no
remaining per-"struct netdev" state, which will allow us to get rid of
"struct netdev_dev" (by renaming it "struct netdev").
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Ethan Jackson <ethan@nicira.com>
This gets rid of the only per-instance data in "struct netdev", which
will make it possible to merge "struct netdev_dev" into "struct netdev" in
a later commit.
Ed Maste wrote the netdev-bsd changes in this commit.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Co-authored-by: Ed Maste <emaste@freebsd.org>
Signed-off-by: Ed Maste <emaste@freebsd.org>
Tested-by: Ed Maste <emaste@freebsd.org>
This patch removes the final bit of linux specific code which
prevents building netdev-vport everywhere. With this, other
platforms automatically get access to patch ports, and (if their
datapath supports it), flow based tunneling.
Signed-off-by: Ethan Jackson <ethan@nicira.com>
This commit moves responsibility for implementing patch ports from
the datapath to ofproto-dpif. There are two main reasons to do
this.
The first is a matter of design: ofproto-dpif both has more
information than the datapath, and is better suited to handle the
complexity required to implement patch ports.
The second is performance. My setup is a virtual machine with two
basic learning bridges connected by patch ports. I used
ovs-benchmark to ping the virtual router IP residing outside the
VM. Over a 60 second run, "ovs-benchmark rate" improves from
14618.1 to 19311.9 transactions per second, or a 32% improvement.
Similarly, "ovs-benchmark latency" improves from 6ms to 4ms.
Signed-off-by: Ethan Jackson <ethan@nicira.com>
This is a straight search-and-replace, except that I also removed #include
<assert.h> from each file where there were no assert calls left.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Ethan Jackson <ethan@nicira.com>
Future patches will need to know the details of a netdev's tunnel
configuration from outside the netdev library.
Signed-off-by: Ethan Jackson <ethan@nicira.com>
When a link is down, or when a link has no speed because it is not a
physical interface, Open vSwitch previously reported that its rate is 100
Mbps as a default. This is counterintuitive, however, so this commit
changes Open vSwitch behavior to report 0 Mbps when a link is down or its
speed is otherwise unavailable.
Bug #13388.
Reported-by: Hiroshi Tanaka <htanaka@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
The ESX userspace looks quite a bit like linux, but has some key
differences which need to be specially handled in the build. To
distinguish between ESX and systems which use the linux datapath
module, this patch adds two new macros "ESX" and "LINUX_DATAPATH".
It uses these macros to disable building code on ESX which only
applies to a true Linux environment. In addition, it adds a new
route-table-stub implementation which is required for the build to
complete successfully on ESX.
Signed-off-by: Ethan Jackson <ethan@nicira.com>
Casts are sometimes necessary. One common reason that they are necessary
is for discarding a "const" qualifier. However, this can impede
maintenance: if the type of the expression being cast changes, then the
presence of the cast can hide a necessary change in the code that does the
cast. Using CONST_CAST, instead of a bare cast, makes these changes
visible.
Inspired by my own work elsewhere:
http://git.savannah.gnu.org/cgit/pspp.git/tree/src/libpspp/cast.h#n80
Signed-off-by: Ben Pfaff <blp@nicira.com>
This patch adds new netdev classes that implement
"system" and "tap" devices on FreeBSD using the
libpcap library. This enables the use of the
"netdev" datapath_type of Open vSwitch on FreeBSD.
Signed-off-by: Gaetano Catalli <gaetano.catalli@gmail.com>
Signed-off-by: Ed Maste <emaste@adaranet.com>
Signed-off-by: Giuseppe Lettieri <g.lettieri@iet.unipi.it>
Signed-off-by: Ben Pfaff <blp@nicira.com>
A smap is a string to string hash map. It has a cleaner interface
than shash's which were traditionally used for the same purpose.
This patch implements the data structure, and changes netdev and
its providers to use it.
Signed-off-by: Ethan Jackson <ethan@nicira.com>
Replaced all instances of Nicira Networks(, Inc) to Nicira, Inc.
Feature #10593
Signed-off-by: Raju Subramanian <rsubramanian@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
iface_configure_qos() passes a callback to netdev_dump_queues() that can
delete queues. The netdev-linux implementation of this function was
unprepared for the callback to delete queues, so this could cause a
use-after-free. This fixes the problem in netdev_linux_dump_queues() and
documents that netdev_dump_queues() implementations must support deletions
in the callback.
Found by valgrind:
==1593== Invalid read of size 8
==1593== at 0x4A8C43: netdev_linux_dump_queues (hmap.h:326)
==1593== by 0x4305F7: bridge_reconfigure (bridge.c:3084)
==1593== by 0x431384: bridge_run (bridge.c:1892)
==1593== by 0x432749: main (ovs-vswitchd.c:96)
==1593== Address 0x632e078 is 8 bytes inside a block of size 32 free'd
==1593== at 0x4C240FD: free (vg_replace_malloc.c:366)
==1593== by 0x4A4D74: hfsc_class_delete (netdev-linux.c:3250)
==1593== by 0x42AA59: iface_delete_queues (bridge.c:3055)
==1593== by 0x4A8C8C: netdev_linux_dump_queues (netdev-linux.c:1881)
==1593== by 0x4305F7: bridge_reconfigure (bridge.c:3084)
==1593== by 0x431384: bridge_run (bridge.c:1892)
Bug #10164.
Reported-by: Ram Jothikumar <ram@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
