A new function vlog_insert_module() is introduced to avoid using
list_insert() from the vlog.h header.
Signed-off-by: Thomas Graf <tgraf@noironetworks.com>
Acked-by: Ben Pfaff <blp@nicira.com>
Following patch adds support for userspace tunneling. Tunneling
needs three more component first is routing table which is configured by
caching kernel routes and second is ARP cache which build automatically
by snooping arp. And third is tunnel protocol table which list all
listening protocols which is populated by vswitchd as tunnel ports
are added. GRE and VXLAN protocol support is added in this patch.
Tunneling works as follows:
On packet receive vswitchd check if this packet is targeted to tunnel
port. If it is then vswitchd inserts tunnel pop action which pops
header and sends packet to tunnel port.
On packet xmit rather than generating Set tunnel action it generate
tunnel push action which has tunnel header data. datapath can use
tunnel-push action data to generate header for each packet and
forward this packet to output port. Since tunnel-push action
contains most of packet header vswitchd needs to lookup routing
table and arp table to build this action.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Jarno Rajahalme <jrajahalme@nicira.com>
Acked-by: Thomas Graf <tgraf@noironetworks.com>
Acked-by: Ben Pfaff <blp@nicira.com>
This commit adds a new API to the 'struct netdev_class' which
allows user to configure the number of tx queues and rx queues
of 'netdev'. Upcoming patches will use this function to set
multiple tx/rx queues when adding the netdev to dpif-netdev.
Currently, only netdev-dpdk module implements this function.
Signed-off-by: Alex Wang <alexw@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
There are couple of reasons to remove this support:
* This is used in very old OVS use-case. It is much better
to read stats directly from OVS.
* Forthcoming commit will remove support for setting stats
for vport. The stats update depends on stats-set.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Ben Pfaff <blp@nicira.com>
This commit adds new variable n_txq to 'struct netdev' for recording
the number of tx queues. Correspondingly, the send_*() functions are
extended to accept queue id as input argument.
All 'netdev-*' implementation will ignore the queue id since having
multiple tx queues is not supported. Upcomping patches will start
using it and create multiple tx queues for dpdk netdev.
Signed-off-by: Alex Wang <alexw@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
This commit adds a new API to the 'struct netdev_class' which
allows user to query the numa node id the 'netdev' is on.
Currently, only netdev-dpdk module implements this function.
Signed-off-by: Alex Wang <alexw@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
These function are used to stored the packet hash. 'netdev-dpdk'
automatically set this value to the RSS hash returned by the
NIC. Other 'netdev's set it to 0 (which is an invalid hash
value), so that callers can compute the hash on their own.
If DPDK support is enabled, struct dpif_packet's member
'dp_hash' is removed and 'pkt.hash.rss' from DPDK mbuf is used
This commit also configure DPDK devices to compute RSS hash
for UDP and IPv6 packets
Signed-off-by: Daniele Di Proietto <ddiproietto@vmware.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Various recent commits have introduced build failures on FreeBSD. This
patch fixes them.
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Ben Pfaff <blp@nicira.com>
The netdev_send function has been modified to accept multiple packets, to
allow netdev providers to amortize locking and queuing costs.
This is especially true for netdev-dpdk.
Later commits exploit the new API.
Signed-off-by: Daniele Di Proietto <ddiproietto@vmware.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
This commit introduces a new data structure used for receiving packets from
netdevs and passing them to dpifs.
The purpose of this change is to allow storing some private data for each
packet. The subsequent commits make use of it.
Signed-off-by: Daniele Di Proietto <ddiproietto@vmware.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
I think these were leftovers from the removal of %z for MSVC that happened
some time ago.
VMware-BZ: 1265762
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Pritesh Kothari <pritesh.kothari@cisco.com>
This commit can be seen as a partial revert of commit
da4a619179d (netdev: Globally track port status changes)
by adding the 'change_seq' to 'struct netdev'.
Signed-off-by: Alex Wang <alexw@nicira.com>
Acked-by: Ben Pfaff <blp@nicira.com>
Leftovers from commit commit 1f317cb5.
("ofpbuf: Introduce access api for base, data and size.")
This fixes regressons introduced by commit 3f976e12.
("lib/ofpbuf: Rename private fields to discourage direct use.")
Acked-by: Ben Pfaff <blp@nicira.com>
Signed-off-by: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
This fixes regressions from commit f7791740
("netdev: Rename netdev_rx to netdev_rxq")
and commit df1e5a3b.
("netdev: Extend rx_recv to pass multiple packets.")
Signed-off-by: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Signed-off-by: Ben Pfaff <blp@nicira.com>
DPDK netdev need to access ofpbuf while sending buffer. Following
patch changes netdev_send accordingly.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Thomas Graf <tgraf@redhat.com>
DPDK can receive multiple packets but current netdev API does
not allow that. Following patch allows dpif-netdev receive batch
of packet in a rx_recv() call for any netdev port. This will be
used by dpdk-netdev.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Use a macro helper to initialize different netdev_*_class for bsd, like
in lib/netdev-linux.c
This helps adding other netdev types for bsd
Signed-off-by: Daniele Di Proietto <daniele.di.proietto@gmail.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Update the netdev_class so that struct ofpbuf * is passed to rx_recv()
to provide both the data and size of the data to read a packet into.
On success, update struct ofpbuf size inside netdev_class rx_recv
implementation and return 0. This moves logic from the caller.
On error a positive error code is returned, whereas previously
a negative error code was returned. This is a more common convention.
This patch should not have any behavioural changes.
This patch is in preparation for the netdev-linux variant of rx_recv()
making use of headroom in the struct ofpbuf * parameter to push a VLAN tag
obtained from auxdata.
Signed-off-by: Simon Horman <horms@verge.net.au>
Co-authored-by: Ben Pfaff <blp@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
this is a leftover of commit da4a6191.
("netdev: Globally track port status changes")
Signed-off-by: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Previously, we tracked status changes for ofports on a per-device basis.
Each time in the main thread's loop, we would inspect every ofport
to determine whether the status had changed for corresponding devices.
This patch replaces the per-netdev change_seq with a global 'struct seq'
which tracks status change for all ports. In the average case where
ports are not constantly going up or down, this allows us to check the
sequence once per main loop and not poll any ports. In the worst case,
execution is expected to be similar to how it is currently.
In a test environment of 5000 internal ports and 50 tunnel ports with
bfd, this reduces average CPU usage of the main thread from about 40% to
about 35%.
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Signed-off-by: Ethan Jackson <ethan@nicira.com>
Acked-by: Ethan Jackson <ethan@nicira.com>
The MSVC C library printf() implementation does not support the 'z', 't',
'j', or 'hh' format specifiers. This commit changes the Open vSwitch code
to avoid those format specifiers, switching to standard macros from
<inttypes.h> where available and inventing new macros resembling them
where necessary. It also updates CodingStyle to specify the macros' use
and adds a Makefile rule to report violations.
Signed-off-by: Alin Serdean <aserdean@cloudbasesolutions.com>
Co-authored-by: Ben Pfaff <blp@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
fix a regression added by commit 89454bf477d1dc95357792677ccbd4d483ab42d8.
"netdev: Fix deadlock when netdev_dump_queues() callback calls into netdev."
Signed-off-by: YAMAMOTO Takashi <yamt@mwd.biglobe.ne.jp>
Signed-off-by: Ben Pfaff <blp@nicira.com>
We've seen a number of deadlocks in the tree since thread safety was
introduced. So far, all of these are self-deadlocks, that is, a single
thread acquiring a lock and then attempting to re-acquire the same lock
recursively. When this has happened, the process simply hung, and it was
somewhat difficult to find the cause.
POSIX "error-checking" mutexes check for this specific problem (and
others). This commit switches from other types of mutexes to
error-checking mutexes everywhere that we can, that is, everywhere that
we're not using recursive mutexes. This ought to help find problems more
quickly in the future.
There might be performance advantages to other kinds of mutexes in some
cases. However, the existing mutex type choices were just guesses, so I'd
rather go for easy detection of errors until we know that other mutex
types actually perform better in specific cases. Also, I did a quick
microbenchmark of glibc mutex types on my host and found that the
error checking mutexes weren't any slower than the other types, at least
when the mutex is uncontended.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Ethan Jackson <ethan@nicira.com>
This is the same lifecycle used in the ofproto provider interface.
Compared to the previous netdev provider interface, it has the
advantage that the netdev top layer can control when any given
netdev becomes visible to the outside world.
Signed-off-by: Ben Pfaff <blp@nicira.com>
The only uses of 'af_inet_sock', in both drivers, were ioctls, so it seemed
like a good abstraction to write a function that just does such an ioctl,
and to factor out shared code into socket-util.
Signed-off-by: Ben Pfaff <blp@nicira.com>
CC: Ed Maste <emaste@freebsd.org>
This API change is necessary for thread safety, to be added in an upcoming
commit. Otherwise, the client would not be able to actually use any of
the returned netdevs because they could already have been destroyed.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Andy Zhou <azhou@nicira.com>
The data items returned by netdev_get_devices() are "struct netdev *"s.
The code fixed up by this commit used them as "struct netdev_bsd *",
which happens to work because struct netdev happens to be at offset 0 in
each struct but it's better to do a proper cast in case someday
struct netdev gets moved to a nonzero offset.
Signed-off-by: Ben Pfaff <blp@nicira.com>
netdev_bsd_get_in4() did not set anything in its 'netmask' output argument
if the IPv4 address was cached, leaving it indeterminate. It would also
mark the cache as valid even if there was an error retrieving the netmask.
This fixes both problems.
Found by inspection.
Signed-off-by: Ben Pfaff <blp@nicira.com>
CC: Ed Maste <emaste@freebsd.org>
fix a typo in the following commit.
> commit 10a89ef04df5669c5cdd02f786150a7ab8454e01
> Author: Ben Pfaff <blp@nicira.com>
> Date: Mon Jun 24 10:54:49 2013 -0700
>
> Replace all uses of strerror() by ovs_strerror(), for thread safety.
>
> Signed-off-by: Ben Pfaff <blp@nicira.com>
Signed-off-by: YAMAMOTO Takashi <yamt@mwd.biglobe.ne.jp>
Signed-off-by: Justin Pettit <jpettit@nicira.com>
netdev_bsd_get_next_hop currently lacks an implementation on FreeBSD, so
its arguments are unused; mark them so.
Signed-off-by: Ed Maste <emaste@freebsd.org>
Signed-off-by: Ben Pfaff <blp@nicira.com>
