OpenFlow 1.0 doesn't allow matching on the ARP source and target
hardware address. This has caused us to introduce hacks such as the
Drop Spoofed ARP action. Now that we have extensible match, we can
match on more fields within ARP:
- Source Hardware Address (arp_sha)
- Target Hardware Address (arp_tha)
Signed-off-by: Justin Pettit <jpettit@nicira.com>
Acked-by: Jesse Gross <jesse@nicira.com>
Acked-by: Ben Pfaff <blp@nicira.com>
We have a need to identify tunnels with keys longer than 32 bits. This
commit adds basic datapath and OpenFlow support for such keys. It doesn't
actually add any tunnel protocols that support 64-bit keys, so this is not
very useful yet.
The 'arg' member of struct odp_msg had to be expanded to 64-bits also,
because it sometimes contains a tunnel ID. This member also contains the
argument passed to ODPAT_CONTROLLER, so I expanded that action's argument
to 64 bits also so that it can use the full width of the expanded 'arg'.
Userspace doesn't take advantage of the new space though (it was only
using 16 bits anyhow).
This commit has been tested only to the extent that it doesn't disrupt
basic Open vSwitch operation. I have not tested it with tunnel traffic.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Jesse Gross <jesse@nicira.com>
Feature #3976.
The old formatting was only good enough for debugging, but now we need to
be able to format cls_rules as part of ofp-print.c. This new code is
modeled after ofp_match_to_string().
Since the Nicira Extended Match was specified nicira-ext.h has claimed that
arbitrary masks are allowed, but in fact only certain masks were actually
implemented. This commit implements general masking for the 802.1Q VLAN
TCI field.
Originally, wildcards were just the OpenFlow OFPFW_* bits. Then, when
OpenFlow added CIDR masks for IP addresses, struct flow_wildcards was born
with additional members for those masks, derived from the wildcard bits.
Then, when OVS added support for tunnels, we added another bit
NXFW_TUN_ID that coexisted with the OFPFW_*. Later we added even more bits
that do not appear in the OpenFlow 1.0 match structure at all. This had
become really confusing, and the difficulties were especially visible in
the long list of invariants in comments on struct flow_wildcards.
This commit cleanly separates the OpenFlow 1.0 wildcard bits from the
bits used inside Open vSwitch, by defining a new set of bits that are
used only internally to Open vSwitch and converting to and from those
wildcard bits at the point where data comes off or goes onto the wire.
It also moves those functions into ofp-util.[ch] since they are only for
dealing with OpenFlow wire protocol now.
The flow_from_match() and flow_to_match() functions have to deal with most
of the state in a cls_rule anyhow, and this will increase in upcoming
commits, to the point that we might as well just use a cls_rule anyhow.
This commit therefore deletes flow_from_match() and flow_to_match(),
integrating their code into cls_rule_from_match() and the new function
cls_rule_to_match(), respectively. It also changes each of the functions'
callers to use the new cls_rule_*() function.
This type and these parameters were useful when ofproto had the need to
separately traverse exact-match rules looking for subrules, but it no
longer does that because subrules (now called "facets") are not kept in
the classifier any longer. All the callers are now passing CLS_INC_ALL
anyhow, so we might as well delete this feature and simplify the code.
The old classifier was not adaptive: it required knowing the structure of
the flows that were likely to be in use to get good performance. It is
likely that it degenerated to linear search in any real-world case.
This new classifier is adaptive and should perform better in the real
world.
Merge these functions into classifier_lookup() and update its interface.
The new version of the classifier soon to be implemented naturally merges
these functions, so this commit updates the interface early.
When userspace and the kernel were using the same structure for flows,
flow_t was a useful way to indicate that a structure was really a userspace
flow instead of a kernel one, but now it's better to just write "struct
flow" for consistency, since OVS doesn't use typedefs for structs
elsewhere.
Acked-by: Jesse Gross <jesse@nicira.com>
The CLASSIFIER_FOR_EACH_EXACT_RULE_SAFE macro was missing its "MEMBER"
argument. It doesn't currently cause any problems because no one uses
the macro.
Add a tun_id field which contains the ID of the encapsulating tunnel
on which a packet was received (0 if not received on a tunnel). Also
add an action which allows the tunnel ID to be set for outgoing
packets. At this point there aren't any tunnel implementations so
these fields don't have any effect.
The matching is exposed to OpenFlow by overloading the high 32 bits
of the cookie as the tunnel ID. ovs-ofctl is capable of turning
on this special behavior using a new "tun-cookie" command but this
command is intentially undocumented to avoid it being used without
a full understanding of the consequences.
OpenFlow 1.0 adds support for matching on IP ToS/DSCP bits.
NOTE: OVS at this point is not wire-compatible with OpenFlow 1.0 until
the final commit in this OpenFlow 1.0 set.
This commit adds (some) support for a couple new OpenFlow 0.9 features:
- The OFPFF_CHECK_OVERLAP flag in Flow Mod messages allows the
controller to prevent flows that would conflict at the same
priority.
- An emergency flow cache that contains a small flow table that is
used if the switch loses connectivity with the controller. I
believe the design has fundamental flaws and looks likely to be
retired. If a controller attempts to add a flow to the emergency
flow cache, OVS always responds that the tables are full.
The OpenFlow 0.9 error codes are also sync'd in the commit.
NOTE: OVS at this point is not wire-compatible with OpenFlow 0.9 until the
final commit in this OpenFlow 0.9 set.
Starting in OpenFlow 0.9, it is possible to match on the VLAN PCP
(priority) field and rewrite the IP ToS/DSCP bits. This check-in
provides that support and bumps the wire protocol number to 0x98.
NOTE: The wire changes come together over the set of OpenFlow 0.9 commits,
so OVS will not be OpenFlow-compatible with any official release between
this commit and the one that completes the set.
