Table features replies can be packed back-to-back within a single
multipart reply. The code here didn't properly parse properties when this
occurred. This fixes the problem.
There is no test in the current tree that exercises this decoding, but an
upcoming commit that adds ofproto support for table-features requests will
add one.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Jarno Rajahalme <jrajahalme@nicira.com>
The ofproto implementation has had an abstraction layer on top of
OFPTC11_TABLE_MISS for a while. This commit pushes that abstraction layer
farther down, into ofp-util. This will be more useful in an upcoming
commit.
During the conversion I realized that the previous implementation was
not entirely correct. In particular, the OpenFlow 1.3+ "table mod" was
still being treated as if it had table miss configuration bits, even
though it doesn't. This commit fixes that issue and updates the tests.
OpenFlow 1.4 adds some more OFPTC_* flags that this new abstraction doesn't
yet support, but OVS didn't support those flags any better before this
commit, so abstracting those is left as future work.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Jarno Rajahalme <jrajahalme@nicira.com>
This will allow, later, to centralize all of the knowledge of instruction
encoding inside ofp-actions.
OFPIT11_ALL and OFPIT13_ALL are no longer used, so this commit removes
them. Their definitions were wrong (they did not shift each bit into
position correctly), so this commit is also a small bug fix.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Jarno Rajahalme <jrajahalme@nicira.com>
Until now, sets of actions have been abstracted separately outside
ofp-actions, as enum ofputil_action_bitmap. Drawing sets of actions into
ofp-actions, as done in this commit, makes for a better overall
abstraction of actions, with better consistency.
A big part of this commit is shifting from using ofp12_table_stats as if
it were an abstraction for OpenFlow table stats, toward using a new
struct ofputil_table_stats, which is what we generally do with other
OpenFlow structures and fits better with the rest of the code.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Jarno Rajahalme <jrajahalme@nicira.com>
Only OpenFlow 1.4 and later support role status messages, but this code
tried to send them to all controllers, which caused an assertion failure.
Also, add tests to check that role status messages work, and that they
don't cause trouble with OF1.2.
Reported-by: Anup Khadka <khadka.py@gmail.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Justin Pettit <jpettit@nicira.com>
An upcoming commit will increase the number of fields beyond 64.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Jarno Rajahalme <jrajahalme@nicira.com>
Add OFPET_FLOW_MONITOR_FAILED which is added in OpenFLow1.4.
Map the OFPERR_NXBRC_FM_* errors to the corresponding new OpenFlow errors.
This is a step towards supporting OpenFlow1.4 flow monitors.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Ben Pfaff <blp@nicira.com>
OFPRR_METER_DELETE was introduced in OF1.4 however meters were introduced
in OF1.3.
Regardless of the OF version when flows are deleted cause flows to be
deleted handle_delete_meter() calls delete_flows__() with
OFPRR_METER_DELETE as the reason.
In order to avoid sending OFPRR_METER_DELETE to controllers connected
using OF1.3 map OFPRR_METER_DELETE to OFPRR_DELETE which exists in that
version.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Use OFPRR_GROUP_DELETE as the reason for deleting flows due
to the removal of a group that they use.
This implementation adds an delete_reason member to struct ofputil_flow_mod
as a convenient way to set the reason used by delete_flows__() when it is
called indirectly from delete_group__().
Signed-off-by: Simon Horman <horms@verge.net.au>
[blp@nicira.com initialized the new member in a few more places]
Signed-off-by: Ben Pfaff <blp@nicira.com>
OpenFlow 1.4 and earlier always send the description of every port in
response to an OFPMP_PORT_DESC request. OpenFlow 1.5 proposes allowing
the controller to request a description of a single port. This commit
implements a prototype.
EXT-69.
Signed-off-by: Ben Pfaff <blp@nicira.com>
OpenFlow 1.4 and earlier always send the description of every group in
response to an OFPMP_GROUP_DESC request. OpenFlow 1.5 proposes allowing
the controller to request a description of a single group. This commit
implements a prototype.
EXT-69.
Signed-off-by: Ben Pfaff <blp@nicira.com>
The size is not fixed for OpenFLow 1.4 and later, so it's a little
deceptive to return any particular value. This function was only used in
one place, so move it inline there.
Signed-off-by: Ben Pfaff <blp@nicira.com>
ofputil_put_phy_port() and ofputil_append_port_desc_stats_reply() had a
lot of code duplication. This reduces it: it deletes some specialized
code from ofputil_put_phy_port(), moving it into its caller
ofputil_put_switch_features_port() that actually needed it. That change
then allows ofputil_append_port_desc_stats_reply() to become a simple
wrapper around ofputil_put_phy_port().
Signed-off-by: Ben Pfaff <blp@nicira.com>
The main effect is to move these functions a little earlier in the file.
Also, OpenFlow 1.4 changed the table-features specific error codes to new
values that apply to all property sets, so this commit updates the error
code names and adds the appropriate OpenFlow 1.4+ codes.
Signed-off-by: Ben Pfaff <blp@nicira.com>
It's harder to calculate the number of ports in a given amount of space in
OpenFlow 1.4 and later, because the ofp_port structure becomes variable
length in those versions. This commit removes the one caller, replacing
it by a version that doesn't need to know the number of ports in advance.
Signed-off-by: Ben Pfaff <blp@nicira.com>
ovs-ofctl supports using port names in commands that operate on ports. It
does this by connecting to the switch, listing the ports, and picking out
the one with the specified name. However, this didn't work properly for
OpenFlow 1.3+, because it always used an OFPT_FEATURES_REQUEST to list the
ports, and in OpenFlow 1.3+ the reply to this request does not include a
list of ports. This commit fixes the problem (using code that previously
was just a fallback when there were too many ports to fit in an
OFPT_FEATURES_REPLY).
For similar reasons, "ovs-ofctl show" wasn't listing the switch's ports
when it connected to a switch over OpenFlow 1.3 or later. This commit
fixes that bug also.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Conflicts:
utilities/ovs-ofctl.c
Visual studio supports zero-size array within a struct or union,
but has to be the last element. GCC does not have this restriction.
Commits 644cfd84772eb7d8 and 6fdaa45a6f6c9 make use of 0 size array.
Remove them so that visual studio can compile them as well.
Reported-by: Gurucharan Shetty <gshetty@nicira.com>
Signed-off-by: Andy Zhou <azhou@nicira.com>
Acked-by: Ben Pfaff <blp@nicira.com>
This is only the communication part of the bundles functionality.
The actual message pre-validation and commits are not implemented.
We also enable OF1.4 for all the tests.
Signed-off-by: Alexandru Copot <alex.mihai.c@gmail.com>
Cc: Daniel Baluta <dbaluta@ixiacom.com>
[blp@nicira.com made ofputil_decode_bundle_add() more obviously correct]
Signed-off-by: Ben Pfaff <blp@nicira.com>
miniflow_extract() extracts packet headers directly to a miniflow,
which is a compressed form of the struct flow. This does not require
a large struct to be cleared to begin with, and accesses less memory.
These performance benefits should allow this to be used in the DPDK
datapath.
miniflow_extract() takes a miniflow as an input/output parameter. On
input the buffer for values to be extracted must be properly
initialized. On output the map contains ones for all the fields that
have been extracted.
Some struct flow fields are reordered to make miniflow_extract to
progress in the logical order.
Some explicit "inline" keywords are necessary for GCC to optimize this
properly. Also, macros are used for same reason instead of inline
functions for pushing data to the miniflow.
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Reviewed-by: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Commit 33ab38d9 (meta-flow: Simplify mf_from_ofp_port_string())
inadvertently removed a check for minus sign at the beginning of a
port number string introduced by commit 05dddba (meta-flow: Don't
allow negative port numbers). This check is still needed, so put it
back, but to ofputil_port_from_string() this time.
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Acked-by: Justin Pettit <jpettit@nicira.com>
Reviewed-by: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Rename 'l2' to 'frame' and add new ofpbuf_set_frame() and ofpbuf_l2().
ofpbuf_set_frame() alse resets all the layer offsets. ofpbuf_l2()
returns NULL if the packet has no Ethernet header, as indicated either
by unset l3 offset or NULL frame pointer. Callers of ofpbuf_l2() are
supposed to check the return value, unless they can otherwise be sure
that the packet has a valid Ethernet header.
The recent commit 437d0d22 made some assumptions that were not valid
regarding the use of the 'l2' pointer in rconn module and by
compose_rarp(). This is now fixed as follows: rconn now relies on the
fact that once OpenFlow messages are given to rconn for transport, the
frame pointer is no longer needed to refer to the OpenFlow header; and
compose_rarp() now sets the frame pointer and offsets as expected.
In addition to storing network frames, ofpbufs are also used for
handling OpenFlow messages and action lists. lib/ofpbuf.h now has a
comment documenting the current usage conventions and invariants.
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Code reads better without the "get", for example "ofpbuf_l3()"
v.s. "ofpbuf_get_l3()". L4 payoad access functions still use the
"get" (e.g., "ofpbuf_get_tcp_payload()").
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
This patch shrinks the struct ofpbuf from 104 to 48 bytes on 64-bit
systems, or from 52 to 36 bytes on 32-bit systems (counting in the
'l7' removal from an earlier patch). This may help contribute to
cache efficiency, and will speed up initializing, copying and
manipulating ofpbufs. This is potentially important for the DPDK
datapath, but the rest of the code base may also see a little benefit.
Changes are:
- Remove 'l7' pointer (previous patch).
- Use offsets instead of layer pointers for l2_5, l3, and l4 using
'l2' as basis. Usually 'data' is the same as 'l2', but this is not
always the case (e.g., when parsing or constructing a packet), so it
can not be easily used as the offset basis. Also, packet parsing is
faster if we do not need to maintain the offsets each time we pull
data from the ofpbuf.
- Use uint32_t for 'allocated' and 'size', as 2^32 is enough even for
largest possible messages/packets.
- Use packed enum for 'source'.
- Rearrange to avoid unnecessary padding.
- Remove 'private_p', which was used only in two cases, both of which
had the invariant ('l2' == 'data'), so we can temporarily use 'l2'
as a private pointer.
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
When the OF1.4 is made safe, so that receiving an unimplemented message
cannot crash the switch, this commit should be reverted.
Signed-off-by: Ben Pfaff <blp@nicira.com>
This defines the version number for OpenFlow 1.4 so that the switch
can actually use it. The ovsdb schema is also modified.
Signed-off-by: Alexandru Copot <alex.mihai.c@gmail.com>
Cc: Daniel Baluta <dbaluta@ixiacom.com>
[blp@nicira.com adjusted code in cases where 1.3 and 1.4 are the same]
Signed-off-by: Ben Pfaff <blp@nicira.com>
Avoid the following warning caused by the combination
of NetBSD's htons implementation and gcc bug.
Now --enable-Werror build succeeds on NetBSD-6.
lib/ofp-util.c: In function 'ofputil_match_from_ofp10_match':
lib/ofp-util.c:174:15: error: integer overflow in expression
Signed-off-by: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Signed-off-by: Ben Pfaff <blp@nicira.com>
This commit makes the userspace support for MPLS more complete. Now
up to 3 labels are supported.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Co-authored-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Simon Horman <horms@verge.net.au>
OpenFlow 1.1 through 1.4 say that the out_group in a flow_mod, for commands
other than OFPFC_DELETE or OFPFC_DELETE_STRICT, should be ignored. OVS
actually reported an error. This fixes the problem.
Reported-by: chen zhang <3zhangchen9211@gmail.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
This allows other libraries to use util.h that has already
defined NOT_REACHED.
Signed-off-by: Harold Lim <haroldl@vmware.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
This form makes it obvious that an OpenFlow 1.1 implementation is missing.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Reviewed-by: Simon Horman <horms@verge.net.au>
