This patch adds a general way of viewing/configuring datapath
cache sizes. With an implementation for the netlink interface.
The ovs-dpctl/ovs-appctl show commands will display the
current cache sizes configured:
$ ovs-dpctl show
system@ovs-system:
lookups: hit:25 missed:63 lost:0
flows: 0
masks: hit:282 total:0 hit/pkt:3.20
cache: hit:4 hit-rate:4.54%
caches:
masks-cache: size:256
port 0: ovs-system (internal)
port 1: br-int (internal)
port 2: genev_sys_6081 (geneve: packet_type=ptap)
port 3: br-ex (internal)
port 4: eth2
port 5: sw0p1 (internal)
port 6: sw0p3 (internal)
A specific cache can be configured as follows:
$ ovs-appctl dpctl/cache-set-size DP CACHE SIZE
$ ovs-dpctl cache-set-size DP CACHE SIZE
For example to disable the cache do:
$ ovs-dpctl cache-set-size system@ovs-system masks-cache 0
Setting cache size successful, new size 0.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Acked-by: Paolo Valerio <pvalerio@redhat.com>
Acked-by: Flavio Leitner <fbl@sysclose.org>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
When you would like to add, modify, or delete a lot of flows in the
datapath, for example when you want to measure performance, adding
one flow at the time won't scale. This as it takes a decent amount
of time to set up the datapath connection.
This new command is in-line with the same command available in
ovs-ofctl which allows the same thing, with the only difference that
we do not verify all lines before we start execution. This allows for
a continuous add/delete stream. For example with a command like this:
python3 -c 'while True:
for i in range(0, 1000):
print("add in_port(0),eth(),eth_type(0x800),ipv4(src=100.1.{}.{}) 1".format(int(i / 256), i % 256))
for i in range(0, 1000):
print("delete in_port(0),eth(),eth_type(0x800),ipv4(src=100.1.{}.{})".format(int(i / 256), i % 256))' \
| sudo utilities/ovs-dpctl add-flows -
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Acked-by: Paolo Valerio <pvalerio@redhat.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Introduce new 'OVS_CTL_TIMEOUT' environment variable
that, if set, will be used as a default timeout for
OVS control utilities. Setting it in 'atlocal.in' will
cover all the hangs inside the testsuite, even when
utils called in a subshell.
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Signed-off-by: Ben Pfaff <blp@ovn.org>
Parsing of the '--timeout' option implemented differently
for every single control utility and, which is more
important, highly inaccurate. In most cases unsigned result
of 'strtoul' stored in signed variable. Parsing failures are
not tracked. 'ovs-appctl' even uses just 'atoi' without any
checking of the argument or result.
This patch unifies the parsing by using 'str_to_uint'.
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Signed-off-by: Ben Pfaff <blp@ovn.org>
ofp-util had been far too large and monolithic for a long time. This
commit breaks it up into units that make some logical sense. It also
moves the pieces of ofp-parse that were specific to each unit into the
relevant unit.
Most of this commit is just moving code around.
Signed-off-by: Ben Pfaff <blp@ovn.org>
Reviewed-by: Yifeng Sun <pkusunyifeng@gmail.com>
FreeBSD insists that <sys/types.h> be included before <netinet/in.h> and
that <netinet/in.h> be included before <arpa/inet.h>. This adds guards to
the "sparse" headers to yield a warning if this order is violated. This
commit also adjusts the order of many #includes to suit this requirement.
Signed-off-by: Ben Pfaff <blp@ovn.org>
Acked-by: Justin Pettit <jpettit@ovn.org>
With this patch, "flush-conntrack" in ovs-dpctl and ovs-appctl accept
a conntrack 5-tuple to delete the conntrack entry specified by the 5-tuple.
For example, user can use the following command to flush a conntrack entry
in zone 5.
$ ovs-dpctl flush-conntrack zone=5 \
'ct_nw_src=10.1.1.2,ct_nw_dst=10.1.1.1,ct_nw_proto=17,ct_tp_src=2,ct_tp_dst=1'
$ ovs-appctl dpctl/flush-conntrack zone=5 \
'ct_nw_src=10.1.1.2,ct_nw_dst=10.1.1.1,ct_nw_proto=17,ct_tp_src=2,ct_tp_dst=1'
VMWare-BZ: #1983178
Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com>
Signed-off-by: Justin Pettit <jpettit@ovn.org>
With the command:
ovs-appctl dpctl/ct-bkts
shows the number of connections per bucket.
By using a threshold:
ovs-appctl dpctl/ct-bkts gt=N
for each bucket shows the number of connections when they
are greater than N.
Signed-off-by: Antonio Fischetti <antonio.fischetti@intel.com>
Signed-off-by: Bhanuprakash Bodireddy <bhanuprakash.bodireddy@intel.com>
Co-authored-by: Bhanuprakash Bodireddy <bhanuprakash.bodireddy@intel.com>
Signed-off-by: Darrell Ball <dlu998@gmail.com>
Signed-off-by: Ben Pfaff <blp@ovn.org>
Adds CT stats to report number of connections grouped by
protocol.
By using
utilities/ovs-appctl dpctl/ct-stats-show
it can display something like:
Connections Stats:
Total: 1808
TCP: 1808
With the verbose options:
utilities/ovs-appctl dpctl/ct-stats-show verbose
it can display:
Connections Stats:
Total: 2671
TCP: 2671
Conn per TCP states:
[ESTABLISHED]=1000
[CLOSING]=1
[TIME_WAIT]=1670
Signed-off-by: Antonio Fischetti <antonio.fischetti@intel.com>
Signed-off-by: Bhanuprakash Bodireddy <bhanuprakash.bodireddy@intel.com>
Co-authored-by: Bhanuprakash Bodireddy <bhanuprakash.bodireddy@intel.com>
Signed-off-by: Ben Pfaff <blp@ovn.org>
Fixes some lines exceeding 80 chars and a couple of typos.
Signed-off-by: Antonio Fischetti <antonio.fischetti@intel.com>
Signed-off-by: Ben Pfaff <blp@ovn.org>
Until now, printing names in "ovs-dpctl dump-flows" was tied to the overall
output verbosity, which in practice meant that to see port names a user had
to see a distracting amount of verbosity. This decouples names from
verbosity.
I'd like to make showing names the default for interactive usage, but so
far names aren't accepted in input so that would frustrate cut-and-paste,
which is an important use of "ovs-dpctl dump-flows" output.
Signed-off-by: Ben Pfaff <blp@ovn.org>
Acked-by: Jan Scheurich <jan.scheurich@ericsson.com>
Tested-by: Jan Scheurich <jan.scheurich@ericsson.com>
ovs-dpctl and ovs-ofctl lack a read-only option to prevent
running of commands that perform read-write operations. Add
it and the necessary scaffolding to each.
Signed-off-by: Ryan Moats <rmoats@us.ibm.com>
Signed-off-by: Ben Pfaff <blp@ovn.org>
It can be used to inspect the connection tracking entries in the
datapath.
Signed-off-by: Daniele Di Proietto <diproiettod@vmware.com>
Acked-by: Joe Stringer <joe@ovn.org>
The coding style guidelines include the following:
- Pick a unique name prefix (ending with an underscore) for each
module, and apply that prefix to all of that module's externally
visible names. Names of macro parameters, struct and union members,
and parameters in function prototypes are not considered externally
visible for this purpose.
This patch adds the new prefix to the externally visible names. This
makes it a bit more obvious what code is coming from common command
line handling code.
Signed-off-by: Russell Bryant <rbryant@redhat.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
This allows users to fetch a flow by giving a particular UFID.
Usage: 'ovs-dpctl get-flow ufid:<ufid>'
Usage: 'ovs-appctl dpctl/get-flow ufid:<ufid>'
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Andy Zhou <azhou@nicira.com>
A new function vlog_insert_module() is introduced to avoid using
list_insert() from the vlog.h header.
Signed-off-by: Thomas Graf <tgraf@noironetworks.com>
Acked-by: Ben Pfaff <blp@nicira.com>
The following macros are renamed to avoid conflicts with other headers:
* WARN_UNUSED_RESULT to OVS_WARN_UNUSED_RESULT
* PRINTF_FORMAT to OVS_PRINTF_FORMAT
* NO_RETURN to OVS_NO_RETURN
Signed-off-by: Thomas Graf <tgraf@noironetworks.com>
Acked-by: Ben Pfaff <blp@nicira.com>
This commit implements the 'list-commands' command for ovs-dpctl
and ovs-appctl dpctl/* commands. The function will print the
usage string for each subcommand.
Signed-off-by: Alex Wang <alexw@nicira.com>
Acked-by: Ben Pfaff <blp@nicira.com>
This commit adds a function that prints (both long and short)
options of a ovs-* command. To use this function, option
'--option' is added to ovs-appctl/dpctl/ofctl and ovsdb-tool
commands. A future patch will use the option output to
conduct bash command-line completion.
Signed-off-by: Alex Wang <alexw@nicira.com>
Acked-by: Ben Pfaff <blp@nicira.com>
To prevent warnings such as "Not all control paths return a value",
we should define NO_RETURN for MSVC.
Currently for gcc, we add NO_RETURN at the end of function declaration.
But for MSVC, "__declspec(noreturn)" is needed at the beginning of function
declaration. So this commit moves NO_RETURN to the beginning of the function
declaration as it works with gcc and clang too.
Signed-off-by: Gurucharan Shetty <gshetty@nicira.com>
Acked-by: Ben Pfaff <blp@nicira.com>
This commit introduces multiple appctl commands (dpctl/*)
They are needed to interact with userspace datapaths (dpif-netdev), because the
ovs-dpctl command runs in a separate process and cannot see the userspace
datapaths inside vswitchd.
This change moves most of the code of utilities/ovs-dpctl.c in lib/dpctl.c.
Both the ovs-dpctl command and the ovs-appctl dpctl/* commands make calls to
lib/dpctl.c functions, to interact with datapaths.
The code from utilities/ovs-dpctl.c has been moved to lib/dpctl.c and has been
changed for different reasons:
- An exit() call in the old code made perfectly sense. Now (since the code
can be run inside vswitchd) it would terminate the daemon. Same reasoning
can be applied to ovs_fatal_*() calls.
- The lib/dpctl.c code _should_ not leak memory.
- All the print* have been replaced with a function pointer provided by the
caller, since this code can be run in the ovs-dpctl process (in which
case we need to print to stdout) or in response to a unixctl request (and
in this case we need to send everything through a socket, using JSON
encapsulation).
The syntax is
ovs-appctl dpctl/(COMMAND) [OPTIONS] [PARAMETERS]
while the ovs-dpctl syntax (which _should_ remain the same after this change)
is
ovs-dpctl [OPTIONS] (COMMAND) [PARAMETERS]
Signed-off-by: Daniele Di Proietto <ddiproietto@vmware.com>
[blp@nicira.com made stylistic and documentation changes]
Signed-off-by: Ben Pfaff <blp@nicira.com>
Commit a6ce4b9d251 (ofproto-dpif-upcall: Avoid use-after-free in
revalidate() corner case.) showed that it is somewhat tricky to correctly
use the existing dpif flow dumping interface to obtain batches of flows.
One has to be careful about calling dpif_flow_dump_next_may_destroy_keys()
before going on to the next flow.
A better interface is possible, one that is naturally oriented toward
retrieving batches when that is a useful optimization. This commit
replaces the dpif interface by such a design, and updates both the
implementations and the callers to adopt it.
This is a fairly large change, but I think that the code in
ofproto-dpif-upcall is easier to understand after the change.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Store the error condition of a failed port configuration in a new
column 'error' in the Interface table.
Example:
$ ovs-vsctl add-port br0 test -- \
set Interface test type=vxlan options:unknown=1
ovs-vsctl: Error detected while setting up 'test'. [...]
$ ovs-vsctl list Interface test | grep error
error : "test: could not set configuration (Invalid argument)"
Fixing the error will clear the error column:
$ ovs-vsctl set Interface test options:remote_ip=1.1.1.1
$ ovs-vsctl list Interface test | grep error
error : []
$
For now, the high level error messages when opening and configuring
the netdev are used. Further patches can extend passing the error
pointer into the individual netdev implementations to allow for more
fine grained error messages to be stored.
Signed-off-by: Thomas Graf <tgraf@redhat.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Recent changes to the flow_dump_next() interface have made it the
responsibility of the dpif implementation to track error status over a
flow dump operation.
This patch removes status tracking from 'struct dpif_flow_dump', allowing
multiple threads to call dpif_flow_dump_next() and track their status
independently. Even if one thread finishes processing flows for a given
iterator and state, it will not prevent other callers from processing
the remaining flows in their buffers.
After this patch, the error code that dpif_flow_dump_next() returns is
only significant for the current state and buffer. As before, the status
of the entire flow dump operation can be obtained by calling
dpif_flow_dump_done().
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
This patch makes it the caller's responsibility to initialize a
per-thread 'state' object and pass it down to the dpif_flow_dump_next()
implementation. The implementation can expect to be called from multiple
threads with the same 'iter' and different 'state' objects.
When flow_dump_next() returns non-zero, the implementation must ensure
that subsequent calls with the same arguments also return non-zero.
Subsequent calls with the same 'iter' and different 'state' may return
zero, but should make progress towards returning non-zero.
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Windows does not have a SIGPIPE. We ignore SIGPIPE for
Linux. To compile on Windows, carve out a new function
to ignore SIGPIPE on Linux.
Signed-off-by: Gurucharan Shetty <gshetty@nicira.com>
Acked-by: Ben Pfaff <blp@nicira.com>
This commit makes the userspace support for MPLS more complete. Now
up to 3 labels are supported.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Co-authored-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Simon Horman <horms@verge.net.au>
The command ovs-dpctl can wrongly output the masks even if the
datapath does not implement mega flows. In this case the output
will be similar to the following:
system@ovs-system:
lookups: hit:14 missed:41 lost:0
flows: 0
masks: hit:18446744073709551615 total:4294967295
hit/pkt:335395346794719104.00
port 0: ovs-system (internal)
port 1: gre_system (gre: df_default=false, ttl=0)
port 2: ots-br0 (internal)
port 3: int0 (internal)
port 4: vnet0
port 5: vnet1
The problem depends on the fact that n_masks stats is stored as a
uint32 in the struct ovs_dp_megaflow_stats and as a uint64 in the
struct dpif_dp_stats. UINT32_MAX instead of UINT64_MAX should be
used to detect if the datapath supports megaflows or not.
Signed-off-by: Francesco Fusco <ffusco@redhat.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
With mega-flows, many flows in the kernel datapath are wildcarded.
For someone that is debugging a system and wants to find a particular
flow and its actions, it is a little hard to zero-in on the flow
because some fields are wildcarded.
With the filter='$filter' option, we can now filter on the o/p
of 'ovs-dpctl dump-flows'.
Signed-off-by: Gurucharan Shetty <gshetty@nicira.com>
Acked-by: Ben Pfaff <blp@nicira.com>
With this commit, whenever the verbosity is enabled with '-m'
option, the ovs-dpctl dump-flows command will display the flows with
in_port field showing the name instead of a port number.
Conversely, one can also use a name in the in_port field with del-flow,
add-flow and mod-flow commands of ovs-dpctl. One should also be able
to use the port name when supplying the datapath flow as an input
to ofproto/trace command.
Signed-off-by: Gurucharan Shetty <gshetty@nicira.com>
Acked-by: Ben Pfaff <blp@nicira.com>
Found by Clang.
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Ethan Jackson <ethan@nicira.com>
Rather than tracking the MPLS depth as a field in the
flow, which is an entirely poor place for it, just track
the delta to the MPLS depth during translation.
This logic was developed while implementing recirculation
and intended to be used to detect when recirculation should
occur. This variant of the patch uses the logic to determine
if processing of actions should stop due to an MPLS
action which cannot be translated (without recirculation).
A side-effect of this patch is that it resolves a bug
whereby ovs-vswitchd will abort due to to an assertion
on eth_type_mpls(ctx->xin->flow.dl_type) in compose_mpls_pop_action(()
if the actions of a flow include pop_mpls twice without
a push_mpls in between.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Inside dpctl_del_flow() argv[0] is 'del-flow' and argv[1] can
be the flow in the absence of the optional datapath argument.
Signed-off-by: Gurucharan Shetty <gshetty@nicira.com>
Acked-by: Ben Pfaff <blp@nicira.com>
When verbose mode tuned on, all dp flow fields described by the netlink
attributes are displayed, including fully wildcarded attributes.
Otherwise, the fully wildcarded attributes are omitted for brevity.
Added -m option to "ovs-dpctl dump-flows" to enable verbose mode. It is
off by default.
Signed-off-by: Andy Zhou <azhou@nicira.com>
[blp@nicira.com added documentation]
Signed-off-by: Ben Pfaff <blp@nicira.com>
This commit fixes the warning issued by 'clang' when pointer is casted
to one with greater alignment.
Signed-off-by: Alex Wang <alexw@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Until now, datapath ports and openflow ports were both represented by
unsigned integers of various sizes. With implicit conversions, etc., it is
easy to mix them up and use one where the other is expected. This commit
creates two typedefs, ofp_port_t and odp_port_t. Both of these two types
are marked by "__attribute__((bitwise))" so that sparse can be used to
detect any misuse.
Signed-off-by: Alex Wang <alexw@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Added support to allow mega flow specified and displayed. ovs-dpctl tool
is mainly used as debugging tool.
This patch also implements the low level user space routines to send
and receive mega flow netlink messages. Those netlink suppor
routines are required for forthcoming user space mega flow patches.
Added a unit test to test parsing and display of mega flows.
Ethan contributed the ovs-dpctl mega flow output function.
Co-authored-by: Ethan Jackson <ethan@nicira.com>
Signed-off-by: Ethan Jackson <ethan@nicira.com>
Signed-off-by: Andy Zhou <azhou@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
This gets rid of the only per-instance data in "struct netdev", which
will make it possible to merge "struct netdev_dev" into "struct netdev" in
a later commit.
Ed Maste wrote the netdev-bsd changes in this commit.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Co-authored-by: Ed Maste <emaste@freebsd.org>
Signed-off-by: Ed Maste <emaste@freebsd.org>
Tested-by: Ed Maste <emaste@freebsd.org>
