With single datapath, multiple userspace bridges share the same datapath.
As such it does not look beneficial that we decide a valid open flow port
number based on the number of ports in the datapath specially now that
we have the ofport_request column in OVSDB.
This commit does not remove ofproto_init_max_ports() interface as defined
in ofproto-provider.h as there may be other implementations that still use it.
But ofproto-dpif should not need it.
Bug #20163.
Signed-off-by: Gurucharan Shetty <gshetty@nicira.com>
Acked-by: Ben Pfaff <blp@nicira.com>
Widen TCP flags handling from 7 bits (uint8_t) to 12 bits (uint16_t).
The kernel interface remains at 8 bits, which makes no functional
difference now, as none of the higher bits is currently of interest
to the userspace.
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Jesse Gross <jesse@nicira.com>
Until now, OVS has expected that the datapath supports all the actions
required by any flow to be installed. There are at least two reasons why
a datapath might not support a given action:
- The datapath version is older than the userspace version, and the
action was introduced after the version of the datapath in use.
- The action is not considered important enough to implement as part of
an ABI that must be maintained forever.
This commit adds infrastructure to handle these cases. It doesn't actually
add any uses; that will come in an upcoming commit.
Signed-off-by: Ben Pfaff <blp@nicira.com>
The declaration of 'get_max_ports()' to return odp_port_t adds
unwanted complexity to coding. This commit changes it back to
return uint32_t type.
Signed-off-by: Alex Wang <alexw@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Until now, datapath ports and openflow ports were both represented by
unsigned integers of various sizes. With implicit conversions, etc., it is
easy to mix them up and use one where the other is expected. This commit
creates two typedefs, ofp_port_t and odp_port_t. Both of these two types
are marked by "__attribute__((bitwise))" so that sparse can be used to
detect any misuse.
Signed-off-by: Alex Wang <alexw@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Added support to allow mega flow specified and displayed. ovs-dpctl tool
is mainly used as debugging tool.
This patch also implements the low level user space routines to send
and receive mega flow netlink messages. Those netlink suppor
routines are required for forthcoming user space mega flow patches.
Added a unit test to test parsing and display of mega flows.
Ethan contributed the ovs-dpctl mega flow output function.
Co-authored-by: Ethan Jackson <ethan@nicira.com>
Signed-off-by: Ethan Jackson <ethan@nicira.com>
Signed-off-by: Andy Zhou <azhou@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Until now, the optional OVS_USERSPACE_ATTR_USERDATA attribute had to be
exactly 64 bits long, if it was present. However, 64 bits is not enough
space to associate as much information with a flow as would be convenient
for some userspace features now under development. This commit generalizes
the attribute, allowing it to be any length.
This generalization is backward-compatible: if userspace only uses 64-bit
attributes, then it will not see any change in behavior.
CC: Romain Lenglet <rlenglet@vmware.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Jesse Gross <jesse@nicira.com>
This patch removes the final bit of linux specific code which
prevents building netdev-vport everywhere. With this, other
platforms automatically get access to patch ports, and (if their
datapath supports it), flow based tunneling.
Signed-off-by: Ethan Jackson <ethan@nicira.com>
Depending on the port and type of datapath, a port may need to be opened
as a different type of device than it's configured. For example, an
"internal" port on a "dummy" datapath should opened as a "dummy" port.
This commit adds the ability for a dpif to provide this information to a
caller. It will be used in a future commit.
Signed-off-by: Justin Pettit <jpettit@nicira.com>
Provide the ability to determine whether a port exists in a datapath
without having to deal with a "dpif_port" structure as with
dpif_port_query_by_name(). A future patch will use this function.
Signed-off-by: Justin Pettit <jpettit@nicira.com>
Most of the code referred to datapath ports as 32-bit values, but a few
places still used 16-bit references.
Signed-off-by: Justin Pettit <jpettit@nicira.com>
The following commit will need to use a value other than a literal
time_msec() in one case. This commit is just preparation.
Factoring the time_msec() call out of the loop in
handle_flow_miss_without_facet() is a really minor optimization. It isn't
the main point here.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Replaced all instances of Nicira Networks(, Inc) to Nicira, Inc.
Feature #10593
Signed-off-by: Raju Subramanian <rsubramanian@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
I'd like to change ->dpif_flow_put() and ->dpif_execute() in the dpif
provider to take the structures of the same names as parameters, instead of
passing them discrete parameters, because this seems like a more sensible
way to do things internally than to have two different ways to pass the
parameters. It might even simplify code slightly. But ->flow_put() and
->execute() wouldn't want the 'type' (because it's implied by the function
being called) or 'error' (because it would be the same as the return
value). Although of course they could just ignore those members, it seems
slightly cleaner to omit them entirely, as this change allows.
Signed-off-by: Ben Pfaff <blp@nicira.com>
At one point in the past, there were three separate queues between the
kernel module and OVS userspace, each of which corresponded to a Netlink
socket (or, before that, to a character device). It made sense to allow
each of these to be enabled or disabled separately, hence the "listen mask"
concept in the dpif layer.
These days, the concept is much less clear-cut. Queuing is no longer on
the basis of different classes of packets but instead striped across a
collection of sockets based on input port. It doesn't really make sense
to enable receiving packets on the basis of the kind of packet anymore.
Accordingly, this commit simplifies the "listen_mask" to just a bool that
either enables or disables receiving packets.
It could be useful to enable or disable receiving packets on a per-vport
basis, but the rest of the code isn't ready to make use of that so this
commit doesn't generalize this much.
Based on this discussion on ovs-dev:
http://openvswitch.org/pipermail/dev/2011-October/012044.html
Signed-off-by: Ben Pfaff <blp@nicira.com>
The unit tests did not allow users to run them as root because
ovs-vswitchd would destroy all of the existing 'system' datapaths.
This patch prevents ovs-vswitchd from registering 'system'
datapaths when running unit tests preventing the issue.
Until now, OVS has handled IP fragments more awkwardly than necessary. It
has not been possible to match on L4 headers, even in fragments with offset
0 where they are actually present. This means that there was no way to
implement ACLs that treat, say, different TCP ports differently, on
fragmented traffic; instead, all decisions for fragment forwarding had to
be made on the basis of L2 and L3 headers alone.
This commit improves the situation significantly. It is still not possible
to match on L4 headers in fragments with nonzero offset, because that
information is simply not present in such fragments, but this commit adds
the ability to match on L4 headers for fragments with zero offset. This
means that it becomes possible to implement ACLs that drop such "first
fragments" on the basis of L4 headers. In practice, that effectively
blocks even fragmented traffic on an L4 basis, because the receiving IP
stack cannot reassemble a full packet when the first fragment is missing.
This commit works by adding a new "fragment type" to the kernel flow match
and making it available through OpenFlow as a new NXM field named
NXM_NX_IP_FRAG. Because OpenFlow 1.0 explicitly says that the L4 fields
are always 0 for IP fragments, it adds a new OpenFlow fragment handling
mode that fills in the L4 fields for "first fragments". It also enhances
ovs-ofctl to allow users to configure this new fragment handling mode and
to parse the new field.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Bug #7557.
Commit b063d9f06 "datapath: Use unicast Netlink sockets for upcalls" that
switched from multicast to unicast Netlink for sending upcalls added a
Netlink PID to each kernel flow, used by OVS_ACTION_ATTR_USERSPACE actions
within the flow as target.
This commit drops this per-flow PID in favor of a per-action PID, because
that is more flexible. It does not yet make use of this additional
flexibility, so behavior should not change.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Jesse Gross <jesse@nicira.com>
Bug #7559.
Over time we wish to reduce the number of datapath-protocol.h definitions
used directly outside of Linux-specific code. This commit removes use of
"struct ovs_dp_stats" from platform-independent code.
Bug #7559.
The "flow" module is concerned only with OpenFlow flows these days. It
shouldn't have anything to do with ODP or dpifs. However, it included
dpif.h just to implement flow_extract_stats(). This function is a better
fit for dpif.c, so this commit moves it there and removes the dpif.h
#include from flow.h and flow.c
This commit also removes a few more dpif.h #includes that weren't needed.
Following patch adds sampling action which takes probability and set
of actions as arguments. When probability is hit, actions are executed for
given packet.
USERSPACE action's userdata (u64) is used to store struct
user_action_cookie as cookie. CONTROLLER action is fixed accordingly.
Now we can remove sFlow code from kernel and implement sFlow generically
as SAMPLE action. sFlow is defined as SAMPLE Action with probability (sFlow
sampling rate) and USERSPACE action as argument. USERSPACE action's data
is used as cookie. sFlow uses this cookie to store output-port, number of
output ports and vlan-id. sample-pool is calculated by using vport
stats.
Signed-off-by: Pravin Shelar <pshelar@nicira.com>
Acked-by: Jesse Gross <jesse@nicira.com>
Acked-by: Ben Pfaff <blp@nicira.com>
Currently ovs is using device stats for Linux devices and count them
itself in other situations. This leads to overlap with hardware stats,
inconsistencies, etc. It's much better to just always count the packets
flowing through the switch and let userspace do any merging that it wants.
Following patch removes vport->get_stats() interface. vport-stat is changed
to use new `struct ovs_vport_stat` rather than rtnl_link_stats64.
Definitions of rtnl_link_stats64 is removed from OVS. dipf_port->stat is also
removed as aggregate stats are only available at netdev layer.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Jesse Gross <jesse@nicira.com>
The prefix "ODP_*" is not overly descriptive in the context of the
larger Linux tree. This commit changes the prefix to "OVS_*" for the
userpace to kernel interactions. The userspace libraries still use
"ODP_" in many of their interfaces since it is more descriptive in the
OVS oeuvre.
Feature #6904
Signed-off-by: Justin Pettit <jpettit@nicira.com>
Acked-by: Jesse Gross <jesse@nicira.com>
ODP_ACTION_ATTR_CONTROLLER in the kernel actually sends packets to
userspace, not the controller. To make it generic rename this action
to ODP_ACTION_ATTR_USERSPACE.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
The kernel now provides the entire flow key for a packet sent up to
userspace, but dpif_recv() would only log the in_port. This change makes
userspace log the entire flow key.
This would have made a bug that I recently looked at a bit easier to
investigate.
Until now, the tun_id and in_port have been lost when a packet is sent from
the kernel to userspace and then back to the kernel. I didn't think that
this was a problem, but recent behavior made me look closer and see that
it makes a difference if sFlow is turned on or if an
ODP_ATTR_ACTION_CONTROLLER action is present. We could possibly kluge
around those, but for future-proofing it seems better to pass the packet
metadata from userspace to the kernel. That is what this commit does.
This commit introduces a user-kernel protocol break. We could avoid that,
if it is desirable, by making ODP_PACKET_ATTR_KEY optional for
ODP_PACKET_CMD_EXECUTE commands.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Jesse Gross <jesse@nicira.com>
This eliminates the final reference from bridge.c directly into the dpif
layer, which will make it easier to change the implementation of ofproto
to support other lower layers.
Until now, the dp_run() and dp_wait() functions had to be called at the top
level of the program because they applied to every open dpif. By replacing
them by functions that take a specific dpif as an argument, we can call
them only from ofproto, which is currently the correct layer to deal with
dpifs.
Jesse suggested this naming scheme, so I'm adjusting existing names to
fit it.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Jesse Gross <jesse@nicira.com>
None of the remaining dpif implementations have more than one name per
dpif, so there's no need for this function anymore.
Suggested-by: Jesse Gross <jesse@nicira.com>
Acked-by: Jesse Gross <jesse@nicira.com>
This commit calls genl_lock() and thus doesn't support Linux before
2.6.35, which wasn't exported before that version. That problem will
be fixed once the whole userspace interface transitions to Generic
Netlink a few commits from now.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Jesse Gross <jesse@nicira.com>
Nothing was productively using the 'flags' member of odp_flow, so this
commit removes it.
ODPFF_ZERO_TCP_FLAGS isn't used at all (as of the previous commit).
ODPFF_EOF has been replaced by a special case of the 'key_len' member.
This will go away, too, once AF_NETLINK starts being used.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Jesse Gross <jesse@nicira.com>
Following this commit, the ODPPF_* constants are only used in
Linux-specific parts of OVS userspace code. This allows the actual Linux
datapath interface to evolve more freely.
Reviewed by Justin Pettit.
Following this commit, "struct odp_flow_stats" is only used in
Linux-specific parts of OVS userspace code. This allows the actual Linux
datapath interface to evolve more freely.
Reviewed by Justin Pettit.
