One common use case of 'struct dp_packet_batch' is to process all
packets in the batch in order. Add an iterator for this use case
to simplify the logic of calling sites,
Another common use case is to drop packets in the batch, by reading
all packets, but writing back pointers of fewer packets. Add macros
to support this use case.
Signed-off-by: Andy Zhou <azhou@ovn.org>
Acked-by: Jarno Rajahalme <jarno@ovn.org>
Add Rx checksum offloading feature support on DPDK physical ports. By default,
the Rx checksum offloading is enabled if NIC supports. However,
the checksum offloading can be turned OFF either while adding a new DPDK
physical port to OVS or at runtime.
The rx checksum offloading can be turned off by setting the parameter to
'false'. For eg: To disable the rx checksum offloading when adding a port,
'ovs-vsctl add-port br0 dpdk0 -- \
set Interface dpdk0 type=dpdk options:rx-checksum-offload=false'
OR (to disable at run time after port is being added to OVS)
'ovs-vsctl set Interface dpdk0 options:rx-checksum-offload=false'
Similarly to turn ON rx checksum offloading at run time,
'ovs-vsctl set Interface dpdk0 options:rx-checksum-offload=true'
The Tx checksum offloading support is not implemented due to the following
reasons.
1) Checksum offloading and vectorization are mutually exclusive in DPDK poll
mode driver. Vector packet processing is turned OFF when checksum offloading
is enabled which causes significant performance drop at Tx side.
2) Normally, OVS generates checksum for tunnel packets in software at the
'tunnel push' operation, where the tunnel headers are created. However
enabling Tx checksum offloading involves,
*) Mark every packets for tx checksum offloading at 'tunnel_push' and
recirculate.
*) At the time of xmit, validate the same flag and instruct the NIC to do the
checksum calculation. In case NIC doesnt support Tx checksum offloading,
the checksum calculation has to be done in software before sending out the
packets.
No significant performance improvement noticed with Tx checksum offloading
due to the e overhead of additional validations + non vector packet processing.
In some test scenarios, it introduces performance drop too.
Rx checksum offloading still offers 8-9% of improvement on VxLAN tunneling
decapsulation even though the SSE vector Rx function is disabled in DPDK poll
mode driver.
Signed-off-by: Sugesh Chandran <sugesh.chandran@intel.com>
Acked-by: Jesse Gross <jesse@kernel.org>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
There's a lot of code in netdev-dpdk which is not at all related to the
netdev interface, mostly the library initialization code.
This commit moves it to a new 'dpdk' module, to simplify 'netdev-dpdk'.
Also a new module 'dpdk-stub' is introduced to implement some functions
when DPDK is not available. This replaces the old 'netdev-nodpdk'
module.
Some redundant includes are removed or reorganized as a consequence.
No functional change.
CC: Aaron Conole <aconole@redhat.com>
Signed-off-by: Daniele Di Proietto <diproiettod@vmware.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Tested-by: Aaron Conole <aconole@redhat.com>
The patch adds a new action to support packet truncation. The new action
is formatted as 'output(port=n,max_len=m)', as output to port n, with
packet size being MIN(original_size, m).
One use case is to enable port mirroring to send smaller packets to the
destination port so that only useful packet information is mirrored/copied,
saving some performance overhead of copying entire packet payload. Example
use case is below as well as shown in the testcases:
- Output to port 1 with max_len 100 bytes.
- The output packet size on port 1 will be MIN(original_packet_size, 100).
# ovs-ofctl add-flow br0 'actions=output(port=1,max_len=100)'
- The scope of max_len is limited to output action itself. The following
packet size of output:1 and output:2 will be intact.
# ovs-ofctl add-flow br0 \
'actions=output(port=1,max_len=100),output:1,output:2'
- The Datapath actions shows:
# Datapath actions: trunc(100),1,1,2
Tested-at: https://travis-ci.org/williamtu/ovs-travis/builds/140037134
Signed-off-by: William Tu <u9012063@gmail.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
DPDK datapath operate on batch of packets. To pass the batch of
packets around we use packets array and count. Next patch needs
to associate meta-data with each batch of packets. So Introducing
a batch structure to make handling the metadata easier.
Signed-off-by: Pravin B Shelar <pshelar@ovn.org>
Acked-by: Jesse Gross <jesse@kernel.org>
This scratchpad can be used by any layer to keep private data.
STT will use it for TCP reassembly state.
Signed-off-by: Pravin B Shelar <pshelar@ovn.org>
Acked-by: Jesse Gross <jesse@kernel.org>
All code is now in include/openvswitch/list.h.
Signed-off-by: Ben Warren <ben@skyportsystems.com>
Acked-by: Ryan Moats <rmoats@us.ibm.com>
Signed-off-by: Ben Pfaff <blp@ovn.org>
DPDK mbufs contain a valid RSS hash only if PKT_RX_RSS_HASH is
set in 'ol_flags'. Otherwise the hash is garbage and doesn't
relate to the packet.
This fixes an issue with vhost, which, being a virtual NIC, doesn't
compute the hash.
Reported-by: Dongjun <dongj@dtdream.com>
Suggested-by: Flavio Leitner <fbl@sysclose.org>
Acked-by: Kevin Traynor <kevin.traynor@intel.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Daniele Di Proietto <diproiettod@vmware.com>
DPDK buf_len is only 16-bit wide ('allocated' was 32-bit), but it should
be enough to store the number of allocated bytes.
This will reduce 'struct dp_packet' size.
Signed-off-by: Daniele Di Proietto <diproiettod@vmware.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
In 'struct ofpbuf' the 'frame' pointer was used to parse different kinds of
data (Ethernet, OpenFlow, Netlink attributes). For Ethernet packets the
'frame' pointer was supposed to have the same value as the 'data'
pointer.
Since 'struct dp_packet' is only used for Ethernet packets, there's no
need for a separate 'frame' pointer: we can use the 'data' pointer
instead.
Signed-off-by: Daniele Di Proietto <diproiettod@vmware.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
The 'list' member is only used (two users) in the slow path.
This commit removes it to reduce the struct size
Signed-off-by: Daniele Di Proietto <diproiettod@vmware.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
We already have the 'dp_hash' embedded in the metadata. This caused
confusion in the code. With this commit it should be clear that
'rss_hash' is the packet hash used for internal purposes, while
'md.dp_hash' is part of the flow, computed during the execution of
certain actions.
Signed-off-by: Daniele Di Proietto <diproiettod@vmware.com>
Acked-by: Ethan Jackson <ethan@nicira.com>
DPDK v1.8.0 makes significant changes to struct rte_mbuf, including
removal of the 'pkt' and 'data' fields. The latter, formally a
pointer, is now calculated via an offset from the start of the
segment buffer. So now dp_packet data is also stored as offset
from base pointer.
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Signed-off-by: Rory Sexton <rory.sexton@intel.com>
Signed-off-by: Kevin Traynor <kevin.traynor@intel.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Currently dp-packet make use of ofpbuf for managing packet
buffers. That complicates ofpbuf, by making dp-packet
independent of ofpbuf both libraries can be optimized for
their own use case.
This avoids mapping operation between ofpbuf and dp_packet
in datapath upcalls.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Jarno Rajahalme <jrajahalme@nicira.com>
Acked-by: Ben Pfaff <blp@nicira.com>
dp_packet is short and better name for datapath packet
structure.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Jarno Rajahalme <jrajahalme@nicira.com>
