Several OVS structs contain embedded named unions, like this:
struct {
...
union {
...
} u;
};
C11 standardized a feature that many compilers already implemented
anyway, where an embedded union may be unnamed, like this:
struct {
...
union {
...
};
};
This is more convenient because it allows the programmer to omit "u."
in many places. OVS already used this feature in several places. This
commit embraces it in several others.
Signed-off-by: Ben Pfaff <blp@ovn.org>
Acked-by: Justin Pettit <jpettit@ovn.org>
Tested-by: Alin Gabriel Serdean <aserdean@ovn.org>
Acked-by: Alin Gabriel Serdean <aserdean@ovn.org>
In netdev_to_ovs_vport_type() it checks for netdev types matching
"gre" with a strstr(). This makes it match ip6gre as well and return
OVS_VPORT_TYPE_GRE, which is clearly wrong.
Move the usage of strstr() *after* all the exact matches with strcmp()
to avoid the problem permanently because when I added the ip6gre
type I ran into a very difficult to detect bug.
Cc: Ben Pfaff <blp@ovn.org>
Signed-off-by: Greg Rose <gvrose8192@gmail.com>
Signed-off-by: Ben Pfaff <blp@ovn.org>
Acked-by: William Tu <u9012063@gmail.com>
Add handlers for OVS_VPORT_TYPE_IP6GRE
Cc: Ben Pfaff <blp@ovn.org>
Signed-off-by: Greg Rose <gvrose8192@gmail.com>
Signed-off-by: Ben Pfaff <blp@ovn.org>
Acked-by: William Tu <u9012063@gmail.com>
ERSPAN is a tunneling protocol based on GRE tunnel. The patch
add erspan tunnel support for ovs-vswitchd with userspace datapath.
Configuring erspan tunnel is similar to gre tunnel, but with
additional erspan's parameters. Matching a flow on erspan's
metadata is also supported, see ovs-fields for more details.
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: Greg Rose <gvrose8192@gmail.com>
Signed-off-by: Ben Pfaff <blp@ovn.org>
This patch backports upstream ipv6 GRE and tunneling into the OVS
OOT (Out of Tree) datapath drivers. The primary reason for this
is to support the ERSPAN feature.
Because there is no previous history of ipv6 GRE and tunneling it is
not possible to exactly reproduce the history of all the files in
the patch. The two newly added files - ip6_gre.c and ip6_tunnel.c -
are cut from whole cloth out of the upstream Linux 4.15 kernel and
then modified as necessary with compatibility layer fixups.
These two files already included parts of several other upstream
commits that also touched other upstream files. As such, this
patch may incorporate parts or all of the following commits:
d350a82 net: erspan: create erspan metadata uapi header
c69de58 net: erspan: use bitfield instead of mask and offset
b423d13 net: erspan: fix use-after-free
214bb1c net: erspan: remove md NULL check
afb4c97 ip6_gre: fix potential memory leak in ip6erspan_rcv
50670b6 ip_gre: fix potential memory leak in erspan_rcv
a734321 ip6_gre: fix error path when ip6erspan_rcv failed
dd8d5b8 ip_gre: fix error path when erspan_rcv failed
293a199 ip6_gre: fix a pontential issue in ip6erspan_rcv
d91e8db5 net: erspan: reload pointer after pskb_may_pull
ae3e133 net: erspan: fix wrong return value
c05fad5 ip_gre: fix wrong return value of erspan_rcv
94d7d8f ip6_gre: add erspan v2 support
f551c91 net: erspan: introduce erspan v2 for ip_gre
1d7e2ed net: erspan: refactor existing erspan code
ef7baf5 ip6_gre: add ip6 erspan collect_md mode
5a963eb ip6_gre: Add ERSPAN native tunnel support
ceaa001 openvswitch: Add erspan tunnel support.
f192970 ip_gre: check packet length and mtu correctly in erspan tx
c84bed4 ip_gre: erspan device should keep dst
c122fda ip_gre: set tunnel hlen properly in erspan_tunnel_init
5513d08 ip_gre: check packet length and mtu correctly in erspan_xmit
935a974 ip_gre: get key from session_id correctly in erspan_rcv
1a66a83 gre: add collect_md mode to ERSPAN tunnel
84e54fe gre: introduce native tunnel support for ERSPAN
In cases where the listed commits also touched other source code
files then the patches are also listed separately within this
patch series.
Signed-off-by: Greg Rose <gvrose8192@gmail.com>
Signed-off-by: Ben Pfaff <blp@ovn.org>
Acked-by: William Tu <u9012063@gmail.com>
Currently, we support offloading of one output port. Remove that
limitation by use of mirred mirror action for all output ports,
except that the last one is mirred redirect action.
Signed-off-by: Chris Mi <chrism@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
When the netdev is in another namespace and the operation doesn't
support network namespaces, return the correct error.
Signed-off-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: Ben Pfaff <blp@ovn.org>
Recent kernels provide the network namespace ID of a port,
so use that to discover where the port currently is.
A network device in another network namespace could have the
same name, so once the socket starts listening to other network
namespaces, it is necessary to confirm the netnsid.
Signed-off-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: Ben Pfaff <blp@ovn.org>
The netlink notification's ancillary data contains the network
namespace id (netnsid) needed to identify the device correctly.
Signed-off-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: Ben Pfaff <blp@ovn.org>
ofp-util had been far too large and monolithic for a long time. This
commit breaks it up into units that make some logical sense. It also
moves the pieces of ofp-parse that were specific to each unit into the
relevant unit.
Most of this commit is just moving code around.
Signed-off-by: Ben Pfaff <blp@ovn.org>
Reviewed-by: Yifeng Sun <pkusunyifeng@gmail.com>
A get command is added for number of conntrack connections.
This command is only supported in the userspace datapath
at this time.
Signed-off-by: Darrell Ball <dlu998@gmail.com>
Signed-off-by: Antonio Fischetti <antonio.fischetti@intel.com>
Co-authored-by: Antonio Fischetti <antonio.fischetti@intel.com>
Signed-off-by: Ben Pfaff <blp@ovn.org>
Get and set dpctl commands are added for conntrack maxconns.
These commands are only supported in the userspace
datapath at this time.
Signed-off-by: Darrell Ball <dlu998@gmail.com>
Signed-off-by: Antonio Fischetti <antonio.fischetti@intel.com>
Co-authored-by: Antonio Fischetti <antonio.fischetti@intel.com>
Signed-off-by: Ben Pfaff <blp@ovn.org>
This patch adds support of flushing a conntrack entry specified by the
conntrack 5-tuple, and provides the implementation in dpif-netlink.
The implementation of dpif-netlink in the linux datapath utilizes the
NFNL_SUBSYS_CTNETLINK netlink subsystem to delete a conntrack entry in
nf_conntrack. Future patches will add support for the userspace and
Windows datapaths.
VMWare-BZ: #1983178
Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com>
Signed-off-by: Justin Pettit <jpettit@ovn.org>
Poll-loop is the core to implement main loop. It should be available in
libopenvswitch.
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Signed-off-by: Ben Pfaff <blp@ovn.org>
With the command:
ovs-appctl dpctl/ct-bkts
shows the number of connections per bucket.
By using a threshold:
ovs-appctl dpctl/ct-bkts gt=N
for each bucket shows the number of connections when they
are greater than N.
Signed-off-by: Antonio Fischetti <antonio.fischetti@intel.com>
Signed-off-by: Bhanuprakash Bodireddy <bhanuprakash.bodireddy@intel.com>
Co-authored-by: Bhanuprakash Bodireddy <bhanuprakash.bodireddy@intel.com>
Signed-off-by: Darrell Ball <dlu998@gmail.com>
Signed-off-by: Ben Pfaff <blp@ovn.org>
Since it's an error but also will always occur in older kernels
log the message with level warning instead of info.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Acked-by: Eric Garver <e@erig.me>
Signed-off-by: Joe Stringer <joe@ovn.org>
It's basically what is being passed today and passing a specific
type adds a compiler type check.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
For non-Ethernet flows, when fixing up the netlink message we need make
sure to pass down a valid Ethertype. The kernel does not understand
packet_type so it's implicitly encoded by the absence of _ETHERNET and
exact match of _ETHERTYPE. Without this change match_validate in the
kernel complains when trying to match packets from L3 tunnels.
e.g.
openvswitch: netlink: Unexpected mask (mask=110088, allowed=3d9804c)
The mask use to always be set in xlate_wc_init() and xlate_wc_finish(),
but that changed for non-Ethernet frames with the commit listed below.
Fixes: 3d4b2e6eb74e ("userspace: Add OXM field MFF_PACKET_TYPE")
Signed-off-by: Joe Stringer <joe@ovn.org>
Co-authored-by: Eric Garver <e@erig.me>
Acked-by: Eric Garver <e@erig.me>
Rather than open-coding access to netlink attribute pointers in
put_exclude_packet_type(), make use of the netlink attribute helpers.
This simplifies the following bugfix.
Signed-off-by: Joe Stringer <joe@ovn.org>
Acked-by: Eric Garver <e@erig.me>
When verbosity is requested on dump-flows (-m) indicate which flows
are offloaded.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Acked-by: Flavio Leitner <fbl@sysclose.org>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Usage:
# to dump all datapath flows (default):
ovs-dpctl dump-flows
# to dump only flows that in kernel datapath:
ovs-dpctl dump-flows type=ovs
# to dump only flows that are offloaded:
ovs-dpctl dump-flows type=offloaded
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Acked-by: Flavio Leitner <fbl@sysclose.org>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Search all datapath added netdevs for a given flow
using netdev flow api and parse it back to dpif flow.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Acked-by: Flavio Leitner <fbl@sysclose.org>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
If a flow was offloaded to a netdev we delete it using netdev
flow api.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Acked-by: Flavio Leitner <fbl@sysclose.org>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Using the new netdev flow api operate will now try and
offload flows to the relevant netdev of the input port.
Other operate methods flows will come in later patches.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Acked-by: Flavio Leitner <fbl@sysclose.org>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
While dumping flows, dump flows that were offloaded to
netdev and parse them back to dpif flow.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Acked-by: Flavio Leitner <fbl@sysclose.org>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
If netdev flow offloading is enabled, flush all
added ports using netdev flow api.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Acked-by: Flavio Leitner <fbl@sysclose.org>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Use the helpers in appropriate places. In most cases, this fixes a
misaligned reference, since ovs_be128 and ovs_u128 require 8-byte alignment
but Netlink only guarantees 4-byte.
Found by GCC -fsanitize=undefined.
Reported-by: Lance Richardson <lrichard@redhat.com>
Signed-off-by: Ben Pfaff <blp@ovn.org>
Acked-by: Lance Richardson <lrichard@redhat.com>
Ports have a new layer3 attribute if they send/receive L3 packets.
The packet_type included in structs dp_packet and flow is considered in
ofproto-dpif. The classical L2 match fields (dl_src, dl_dst, dl_type, and
vlan_tci, vlan_vid, vlan_pcp) now have Ethernet as pre-requisite.
A dummy ethernet header is pushed to L3 packets received from L3 ports
before the the pipeline processing starts. The ethernet header is popped
before sending a packet to a L3 port.
For datapath ports that can receive L2 or L3 packets, the packet_type
becomes part of the flow key for datapath flows and is handled
appropriately in dpif-netdev.
In the 'else' branch in flow_put_on_pmd() function, the additional check
flow_equal(&match.flow, &netdev_flow->flow) was removed, as a) the dpcls
lookup is sufficient to uniquely identify a flow and b) it caused false
negatives because the flow in netdev->flow may not properly masked.
In dpif_netdev_flow_put() we now use the same method for constructing the
netdev_flow_key as the one used when adding the flow to the dplcs to make sure
these always match. The function netdev_flow_key_from_flow() used so far was
not only inefficient but sometimes caused mismatches and subsequent flow
update failures.
The kernel datapath does not support the packet_type match field.
Instead it encodes the packet type implictly by the presence or absence of
the Ethernet attribute in the flow key and mask.
This patch filters the PACKET_TYPE attribute out of netlink flow key and
mask to be sent to the kernel datapath.
Signed-off-by: Lorand Jakab <lojakab@cisco.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Yi Yang <yi.y.yang@intel.com>
Signed-off-by: Jan Scheurich <jan.scheurich@ericsson.com>
Co-authored-by: Zoltan Balogh <zoltan.balogh@ericsson.com>
Signed-off-by: Ben Pfaff <blp@ovn.org>
This function attempts to open a bunch of new handlers. If it fails, it
attempts to close all the handlers that have already been opened.
Unfortunately, the loop to close the opened handlers used the wrong array
index: 'i' instead of 'j'. This fixes the problem.
Found by Coverity.
Reported-at: https://scan3.coverity.com/reports.htm#v16889/p10449/fileInstanceId=14762827&defectInstanceId=4305351&mergedDefectId=180429
Signed-off-by: Ben Pfaff <blp@ovn.org>
Acked-by: Justin Pettit <jpettit@ovn.org>
On dpif init, probe for whether tunnels are created using in-tree
(upstream linux) or out-of-tree (OVS). This is done by probing for the
existence of "ovs_geneve" via rtnetlink. This is used to determine how
to create the tunnel devices.
For out-of-tree tunnels, only try genetlink/compat.
For in-tree kernel tunnels, try rtnetlink then fallback to genetlink.
Signed-off-by: Eric Garver <e@erig.me>
Signed-off-by: Joe Stringer <joe@ovn.org>
In order to be able to add those tunnels, we need to add code to create
the tunnels and add them as NETDEV vports. And when there is no support
to create them, we need to fallback to compatibility code and add them
as tunnel vports.
When removing those tunnels, we need to remove the interfaces as well,
and detecting the right type might be important, at least to distinguish
the tunnel vports that we should remove and the interfaces that we
shouldn't.
Co-authored-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com>
Signed-off-by: Eric Garver <e@erig.me>
Signed-off-by: Joe Stringer <joe@ovn.org>
This breaks up creating compat ports so we can reuse some of the code to
create ports with rtnetlink.
Co-authored-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com>
Signed-off-by: Eric Garver <e@erig.me>
Signed-off-by: Joe Stringer <joe@ovn.org>
This commit adds a packet_type attribute to the structs dp_packet and flow
to explicitly carry the type of the packet as prepration for the
introduction of the so-called packet type-aware pipeline (PTAP) in OVS.
The packet_type is a big-endian 32 bit integer with the encoding as
specified in OpenFlow verion 1.5.
The upper 16 bits contain the packet type name space. Pre-defined values
are defined in openflow-common.h:
enum ofp_header_type_namespaces {
OFPHTN_ONF = 0, /* ONF namespace. */
OFPHTN_ETHERTYPE = 1, /* ns_type is an Ethertype. */
OFPHTN_IP_PROTO = 2, /* ns_type is a IP protocol number. */
OFPHTN_UDP_TCP_PORT = 3, /* ns_type is a TCP or UDP port. */
OFPHTN_IPV4_OPTION = 4, /* ns_type is an IPv4 option number. */
};
The lower 16 bits specify the actual type in the context of the name space.
Only name spaces 0 and 1 will be supported for now.
For name space OFPHTN_ONF the relevant packet type is 0 (Ethernet).
This is the default packet_type in OVS and the only one supported so far.
Packets of type (OFPHTN_ONF, 0) are called Ethernet packets.
In name space OFPHTN_ETHERTYPE the type is the Ethertype of the packet.
A packet of type (OFPHTN_ETHERTYPE, <Ethertype>) is a standard L2 packet
whith the Ethernet header (and any VLAN tags) removed to expose the L3
(or L2.5) payload of the packet. These will simply be called L3 packets.
The Ethernet address fields dl_src and dl_dst in struct flow are not
applicable for an L3 packet and must be zero. However, to maintain
compatibility with the large code base, we have chosen to copy the
Ethertype of an L3 packet into the the dl_type field of struct flow.
This does not mean that it will be possible to match on dl_type for L3
packets with PTAP later on. Matching must be done on packet_type instead.
New dp_packets are initialized with packet_type Ethernet. Ports that
receive L3 packets will have to explicitly adjust the packet_type.
Signed-off-by: Jean Tourrilhes <jt@labs.hpe.com>
Signed-off-by: Jan Scheurich <jan.scheurich@ericsson.com>
Co-authored-by: Zoltan Balogh <zoltan.balogh@ericsson.com>
Signed-off-by: Ben Pfaff <blp@ovn.org>
The return code of dpif_netlink_port_query__() was not being checked.
Fixes: da467899ab6e ("Windows: Add internal switch port per OVS bridge")
Signed-off-by: Eric Garver <e@erig.me>
Acked-by: Alin Gabriel Serdean <aserdean@cloudbasesolutions.com>
Signed-off-by: Joe Stringer <joe@ovn.org>
Fixes: da467899ab6e ("Windows: Add internal switch port per OVS bridge")
Signed-off-by: Eric Garver <e@erig.me>
Acked-by: Alin Gabriel Serdean <aserdean@cloudbasesolutions.com>
Signed-off-by: Joe Stringer <joe@ovn.org>
Add DPIF-level infrastructure for meters. Allow meter_set to modify
the meter configuration (e.g. set the burst size if unspecified).
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Signed-off-by: Andy Zhou <azhou@ovn.org>
dpif_netlink_port_query__ is used before it is defined on Windows.
Add a forward declaration to it.
Signed-off-by: Alin Gabriel Serdean <aserdean@cloudbasesolutions.com>
Acked-by: Sairam Venugopal <vsairam@vmware.com>
Signed-off-by: Gurucharan Shetty <guru@ovn.org>
Currently we parse the 'other_config' column in Openvswitch table in
bridge.c. We extract the values (just 'pmd-cpu-mask' for now) and we
pass them down to the datapath, via different layers.
If we want to pass other values to dpif-netdev.c (like we recently
discussed) we would have to touch ofproto.c, ofproto-dpif.c and dpif.c.
This patch sends the entire other_config column to dpif-netdev, so that
dpif-netdev can extract the values it's interested in.
No functional change.
Signed-off-by: Daniele Di Proietto <diproiettod@vmware.com>
Acked-by: Ben Pfaff <blp@ovn.org>
This patch updates the following commands in the vswitch:
ovs-vsctl add-br br-test
ovs-vsctl del-br br-test
ovs-vsctl add-br br-test:
This command will now create an internal port on the MSFT virtual switch
using the WMI interface from Msvm_VirtualEthernetSwitchManagementService
leveraging the method AddResourceSettings.
Before creating the actual port, the switch will be queried to see if there
is not a port already created (good for restarts when restarting the
vswitch daemon). If there is a port defined it will return success and log
a message.
After checking if the port already exists the command will also verify
if the forwarding extension (windows datapath) is enabled and on a single
switch. If it is not activated or if it is activated on multiple switches
it will return an error and a message will be logged.
After the port was created on the switch, we will disable the adapter on
the host and rename to the corresponding OVS bridge name for consistency.
The user will enable and set the values he wants after creation.
ovs-vsctl del-br br-test
This command will remove an internal port on the MSFT virtual switch
using the Msvm_VirtualEthernetSwitchManagementService class and executing
the method RemoveResourceSettings.
Both commands will be blocking until the WMI job is finished, this allows us
to guarantee that the ports are created and their name are set before issuing
a netlink message to the windows datapath.
This patch also includes helpers for normal WMI retrievals and initializations.
Appveyor and documentation has been modified to include the libraries needed
for COM objects.
This patch was tested individually using IMallocSpy and CRT heap checks
to ensure no new memory leaks are introduced.
Tested on the following OS's:
Windows 2012, Windows 2012r2, Windows 2016
Signed-off-by: Alin Gabriel Serdean <aserdean@cloudbasesolutions.com>
Acked-by: Paul Boca <pboca@cloudbasesolutions.com>
Acked-by: Sairam Venugopal <vsairam@vmware.com>
Signed-off-by: Gurucharan Shetty <guru@ovn.org>
This commit adds functionality to pass value of 'other_config' column
of 'Interface' table to datapath.
This may be used to pass not directly connected with netdev options and
configure behaviour of the datapath for different ports.
For example: pinning of rx queues to polling threads in dpif-netdev.
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Acked-by: Daniele Di Proietto <diproiettod@vmware.com>
To easily allow both in- and out-of-tree building of the Python
wrapper for the OVS JSON parser (e.g. w/ pip), move json.h to
include/openvswitch. This also requires moving lib/{hmap,shash}.h.
Both hmap.h and shash.h were #include-ing "util.h" even though the
headers themselves did not use anything from there, but rather from
include/openvswitch/util.h. Fixing that required including util.h
in several C files mostly due to OVS_NOT_REACHED and things like
xmalloc.
Signed-off-by: Terry Wilson <twilson@redhat.com>
Signed-off-by: Ben Pfaff <blp@ovn.org>
Modify dpif-netlink.c and netlink-conntrack.c to send down dump and flush command
to Windows datapath. Include netlink-conntrack.c and netlink-conntrack.h
in automake.mk for Windows binaries.
Windows currently supports only NETLINK_GENERIC port. In order to support
the NETLINK_NETFILTER messages, the port id is being overwritten to
NETLINK_GENERIC on Windows and datapath has been updated to support the
new message format.
Signed-off-by: Sairam Venugopal <vsairam@vmware.com>
Acked-by: Paul-Daniel Boca <pboca@cloudbasesolutions.com>
Acked-by: Nithin Raju <nithin@vmware.com>
Acked-by: Nithin Raju <nithin@vmware.com>
Signed-off-by: Gurucharan Shetty <guru@ovn.org>
OVS using DPDK (or the userspace datapath without DPDK) can still function
correctly without the module loaded.
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Ben Pfaff <blp@ovn.org>
A number of times I've looked at code and thought that it would be easier
to understand if I could write an initializer instead of
ofpbuf_use_const(). This commit adds a function for that purpose and
adapts a lot of code to use it, in the places where I thought it made
the code better.
In theory this could improve code generation since the new function can
be inlined whereas ofpbuf_use_const() isn't. But I guess that's probably
insignificant; the intent of this change is code readability.
Signed-off-by: Ben Pfaff <blp@ovn.org>
Acked-by: Jarno Rajahalme <jarno@ovn.org>
This member function is used by the ct-dpif module to provide its
services. It's implemented using the netlink-conntrack module.
N.B. The Linux kernel datapaths share the connection tracker among them
and with the rest of the system. Therefore the operations are not
really dpif specific.
Signed-off-by: Daniele Di Proietto <diproiettod@vmware.com>
Acked-by: Joe Stringer <joe@ovn.org>
These member functions are used by the ct-dpif module to provide its
services. They're implemented using the netlink-conntrack module.
N.B. The Linux kernel datapaths share the connection tracker among them
and with the rest of the system. Therefore the operations are not
really dpif specific.
Signed-off-by: Daniele Di Proietto <diproiettod@vmware.com>
Acked-by: Joe Stringer <joe@ovn.org>
