mir/ovs
2
0
Fork 0
mirror of https://github.com/openvswitch/ovs synced 2025-08-22 09:58:01 +00:00
Code Issues Releases Wiki Activity
ovs/include/openvswitch/ofp-errors.h
Ben Pfaff 29718ad49d Remove support for OpenFlow 1.6 (draft). 
ONF abandoned the OpenFlow specification, so that OpenFlow 1.6 will never
be completed.  It did not contain much in the way of useful features, so
remove what support Open vSwitch already had.

Signed-off-by: Ben Pfaff <blp@ovn.org>
Acked-by: Justin Pettit <jpettit@ovn.org>
2019-02-05 09:21:19 -08:00

927 lines
30 KiB
C
Raw Blame History

/*
* Copyright (c) 2008-2017 Nicira, Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef OPENVSWITCH_OFP_ERRORS_H
#define OPENVSWITCH_OFP_ERRORS_H 1
#include <stdbool.h>
#include <stddef.h>
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
#include "openflow/openflow.h"
struct ds;
struct ofpbuf;
struct ofputil_port_map;
struct ofputil_table_map;
/* Error codes.
*
* We embed system errno values and OpenFlow standard and vendor extension
* error codes into the positive range of "int":
*
* - Errno values are assumed to use the range 1 through 2**30 - 1.
*
* (C and POSIX say that errno values are positive. We assume that they
* are less than 2**29. They are actually less than 65536 on at least
* Linux, FreeBSD, OpenBSD, and Windows.)
*
* - OpenFlow standard and vendor extension error codes use the range
* starting at 2**30 (OFPERR_OFS).
*
* Zero and negative values are not used.
*/
#define OFPERR_OFS (1 << 30)
/* OpenFlow error codes
* --------------------
*
* The comments below are parsed by the extract-ofp-errors program at build
* time and used to determine the mapping between "enum ofperr" constants and
* error type/code values used in the OpenFlow protocol:
*
* - The first part of each comment specifies the vendor, OpenFlow versions,
* type, and sometimes a code for each protocol that supports the error:
*
* # The vendor is OF for standard OpenFlow error codes. Otherwise it
* is one of the *_VENDOR_ID codes defined in openflow-common.h. (To
* add support for a new vendor, add a VENDOR_ID code to that
* header.)
*
* # The version can specify a specific OpenFlow version, a version
* range delimited by "-", or an open-ended range with "+".
*
* # Standard OpenFlow errors have both a type and a code. Extension
* errors generally have only a type, no code. There is one
* exception: Nicira extension (NX) errors for OpenFlow 1.0 and 1.1
* have both a type and a code. (This means that the version
* specification for NX errors may not include version 1.0 or 1.1 (or
* both) along with version 1.2 or later, because the requirements
* for those versions are different.)
*
* - Additional text is a human-readable description of the meaning of each
* error, used to explain the error to the user. Any text enclosed in
* square brackets is omitted; this can be used to explain rationale for
* choice of error codes in the case where this is desirable.
*
*
* Expected duplications
* ---------------------
*
* Occasionally, in one version of OpenFlow a single named error can indicate
* two or more distinct errors, then a later version of OpenFlow splits those
* meanings into different error codes. When that happens, both errors are
* assigned the same value in the earlier version. That is ordinarily a
* mistake, so the build system reports an error. When that happens, add the
* error message to the list of "Expected duplications" below to suppress the
* error. In such a case, the named error defined earlier is how OVS
* interprets the earlier, merged form of the error.
*
* For example, OpenFlow 1.1 defined (3,5) as OFPBIC_UNSUP_EXP_INST, then
* OpenFlow 1.2 broke this error into OFPBIC_BAD_EXPERIMENTER as (3,5) and
* OFPBIC_BAD_EXT_TYPE as (3,6). To allow the OVS code to report just a single
* error code, instead of protocol version dependent errors, this list of
* errors only lists the latter two errors, giving both of them the same code
* (3,5) for OpenFlow 1.1. Then, when OVS serializes either error into
* OpenFlow 1.1, it uses the same code (3,5). In the other direction, when OVS
* deserializes (3,5) from OpenFlow 1.1, it translates it into
* OFPBIC_BAD_EXPERIMENTER (because its definition precedes that of
* OFPBIC_BAD_EXT_TYPE below). See the "encoding OFPBIC_* experimenter errors"
* and "decoding OFPBIC_* experimenter errors" tests in tests/ofp-errors.at for
* full details.
*/
enum ofperr {
/* Expected duplications. */
/* Expected: 0x0,3,5 in OF1.1 means both OFPBIC_BAD_EXPERIMENTER and
* OFPBIC_BAD_EXP_TYPE. */
/* Expected: 0x0,1,5 in OF1.0 means both OFPBRC_EPERM and
* OFPBRC_IS_SLAVE. */
/* Expected: 0x0,1,5 in OF1.1 means both OFPBRC_EPERM and
* OFPBRC_IS_SLAVE. */
/* ## ------------------ ## */
/* ## OFPET_HELLO_FAILED ## */
/* ## ------------------ ## */
/* OF1.0+(0,0). No compatible version. */
OFPERR_OFPHFC_INCOMPATIBLE = OFPERR_OFS,
/* OF1.0+(0,1). Permissions error. */
OFPERR_OFPHFC_EPERM,
/* ## ----------------- ## */
/* ## OFPET_BAD_REQUEST ## */
/* ## ----------------- ## */
/* OF1.0+(1,0). ofp_header.version not supported. */
OFPERR_OFPBRC_BAD_VERSION,
/* OF1.0+(1,1). ofp_header.type not supported. */
OFPERR_OFPBRC_BAD_TYPE,
/* OF1.0+(1,2). ofp_stats_msg.type not supported. */
OFPERR_OFPBRC_BAD_STAT,
/* OF1.0+(1,3). Vendor not supported (in ofp_vendor_header or
* ofp_stats_msg). */
OFPERR_OFPBRC_BAD_VENDOR,
/* OF1.0+(1,4). Vendor subtype not supported. */
OFPERR_OFPBRC_BAD_SUBTYPE,
/* OF1.0+(1,5). Permissions error. */
OFPERR_OFPBRC_EPERM,
/* OF1.0+(1,6). Wrong request length for type. */
OFPERR_OFPBRC_BAD_LEN,
/* OF1.0+(1,7). Specified buffer has already been used. */
OFPERR_OFPBRC_BUFFER_EMPTY,
/* OF1.0+(1,8). Specified buffer does not exist. */
OFPERR_OFPBRC_BUFFER_UNKNOWN,
/* NX1.0(1,512), OF1.1+(1,9). Specified table-id invalid or does not exist.
* [ A non-standard error (1,512), formerly OFPERR_NXBRC_BAD_TABLE_ID,
* is used for OpenFlow 1.0 as there seems to be no appropriate error
* code defined the specification. ] */
OFPERR_OFPBRC_BAD_TABLE_ID,
/* OF1.0-1.1(1,5), OF1.2+(1,10). Denied because controller is slave. */
OFPERR_OFPBRC_IS_SLAVE,
/* NX1.0-1.1(1,514), OF1.2+(1,11). Invalid or missing port. [ A
* non-standard error (1,514), formerly OFPERR_NXBRC_BAD_IN_PORT is used
* for OpenFlow 1.0 and 1.1 as there seems to be no appropriate error code
* defined the specifications. ] */
OFPERR_OFPBRC_BAD_PORT,
/* OF1.2+(1,12). Invalid packet in packet-out. */
OFPERR_OFPBRC_BAD_PACKET,
/* OF1.3+(1,13). Multipart request overflowed the assigned buffer. */
OFPERR_OFPBRC_MULTIPART_BUFFER_OVERFLOW,
/* ONF1.3(2640), OF1.4+(1,14). Timeout during multipart request. */
OFPERR_OFPBRC_MULTIPART_REQUEST_TIMEOUT,
/* ONF1.3(2641), OF1.4+(1,15). Timeout during multipart reply. */
OFPERR_OFPBRC_MULTIPART_REPLY_TIMEOUT,
/* OF1.5+(1,16). Switch received a OFPMP_BUNDLE_FEATURES request and
* failed to update the scheduling tolerance. */
OFPERR_OFPBRC_MULTIPART_BAD_SCHED,
/* OF1.5+(1,17). Match fields must include only pipeline fields. */
OFPERR_OFPBRC_PIPELINE_FIELDS_ONLY,
/* OF1.5+(1,18). Unspecified error. */
OFPERR_OFPBRC_UNKNOWN,
/* NX1.0-1.1(1,256), NX1.2+(2). Invalid NXM flow match. */
OFPERR_NXBRC_NXM_INVALID,
/* NX1.0-1.1(1,257), NX1.2+(3). The nxm_type, or nxm_type taken in
* combination with nxm_hasmask or nxm_length or both, is invalid or not
* implemented. */
OFPERR_NXBRC_NXM_BAD_TYPE,
/* NX1.0-1.1(1,515), NX1.2+(4). Must-be-zero field had nonzero value. */
OFPERR_NXBRC_MUST_BE_ZERO,
/* NX1.0-1.1(1,516), NX1.2+(5). The reason in an ofp_port_status message
* is not valid. */
OFPERR_NXBRC_BAD_REASON,
/* NX1.0-1.1(1,520), NX1.2+(9). The 'event' in an NXST_FLOW_MONITOR reply
* does not specify one of the NXFME_ABBREV, NXFME_ADD, NXFME_DELETE, or
* NXFME_MODIFY. */
OFPERR_NXBRC_FM_BAD_EVENT,
/* NX1.0-1.1(1,521), NX1.2+(10). The error that occurred cannot be
* represented in this OpenFlow version. */
OFPERR_NXBRC_UNENCODABLE_ERROR,
/* ## ---------------- ## */
/* ## OFPET_BAD_ACTION ## */
/* ## ---------------- ## */
/* OF1.0+(2,0). Unknown or unsupported action type. */
OFPERR_OFPBAC_BAD_TYPE,
/* OF1.0+(2,1). Length problem in actions. */
OFPERR_OFPBAC_BAD_LEN,
/* OF1.0+(2,2). Unknown experimenter id specified. */
OFPERR_OFPBAC_BAD_VENDOR,
/* OF1.0+(2,3). Unknown action type for experimenter id. */
OFPERR_OFPBAC_BAD_VENDOR_TYPE,
/* OF1.0+(2,4). Problem validating output port. */
OFPERR_OFPBAC_BAD_OUT_PORT,
/* OF1.0+(2,5). Bad action argument. */
OFPERR_OFPBAC_BAD_ARGUMENT,
/* OF1.0+(2,6). Permissions error. */
OFPERR_OFPBAC_EPERM,
/* OF1.0+(2,7). Can't handle this many actions. */
OFPERR_OFPBAC_TOO_MANY,
/* OF1.0+(2,8). Problem validating output queue. */
OFPERR_OFPBAC_BAD_QUEUE,
/* NX1.0(2,9), OF1.1+(2,9). Invalid group id in output action. */
OFPERR_OFPBAC_BAD_OUT_GROUP,
/* NX1.0(1,522), OF1.1+(2,10). Action can't apply for this match or a
* prerequisite for use of this field is unmet. */
OFPERR_OFPBAC_MATCH_INCONSISTENT,
/* OF1.1+(2,11). Action order is unsupported for the action list in an
* Apply-Actions instruction */
OFPERR_OFPBAC_UNSUPPORTED_ORDER,
/* OF1.1+(2,12). Actions uses an unsupported tag/encap. */
OFPERR_OFPBAC_BAD_TAG,
/* NX1.0-1.1(1,523), OF1.2+(2,13). Action uses unknown or unsupported OXM
* or NXM field. */
OFPERR_OFPBAC_BAD_SET_TYPE,
/* NX1.0-1.1(1,524), OF1.2+(2,14). Action references past the end of an
* OXM or NXM field, or uses a length of zero. */
OFPERR_OFPBAC_BAD_SET_LEN,
/* NX1.0-1.1(1,525), OF1.2+(2,15). Action sets a field to an invalid or
* unsupported value, or modifies a read-only field. */
OFPERR_OFPBAC_BAD_SET_ARGUMENT,
/* ONF1.3-1.4(4250), OF1.5+(2,16). Field in Set-Field action has Has-Mask
* bit set to 1. */
OFPERR_OFPBAC_BAD_SET_MASK,
/* OF1.5+(2,17). Invalid meter id in meter action. */
OFPERR_OFPBAC_BAD_METER,
/* NX1.0-1.1(2,256), NX1.2+(11). Must-be-zero action argument had nonzero
* value. */
OFPERR_NXBAC_MUST_BE_ZERO,
/* NX1.0-1.1(2,526), NX1.2+(15). Conjunction action must be only action
* present. conjunction(id, k/n) must satisfy 1 <= k <= n and 2 <= n <=
* 64. */
OFPERR_NXBAC_BAD_CONJUNCTION,
/* NX1.3+(39). Unsupported packet type in encap or decap. */
OFPERR_NXBAC_BAD_HEADER_TYPE,
/* NX1.3+(40). Unrecognized encap or decap property. */
OFPERR_NXBAC_UNKNOWN_ED_PROP,
/* NX1.3+(41). Error in encap or decap property. */
OFPERR_NXBAC_BAD_ED_PROP,
/* NX1.0-1.1(1,265), NX1.2+(42). Action requires connection tracking or a
* particular connection-tracking based feature that the datapath in use
* does not support. If a kernel-based datapath is in use, the kernel
* module may need to be upgraded. */
OFPERR_NXBAC_CT_DATAPATH_SUPPORT,
/* ## --------------------- ## */
/* ## OFPET_BAD_INSTRUCTION ## */
/* ## --------------------- ## */
/* OF1.1+(3,0). Unknown instruction. */
OFPERR_OFPBIC_UNKNOWN_INST,
/* NX1.0(2,257), OF1.1+(3,1). Switch or table does not support the
* instruction. */
OFPERR_OFPBIC_UNSUP_INST,
/* OF1.1+(3,2). Invalid Table-ID specified. */
OFPERR_OFPBIC_BAD_TABLE_ID,
/* OF1.1+(3,3). Metadata value unsupported by datapath. */
OFPERR_OFPBIC_UNSUP_METADATA,
/* OF1.1+(3,4). Metadata mask value unsupported by datapath. */
OFPERR_OFPBIC_UNSUP_METADATA_MASK,
/* OF1.1+(3,5). Unknown experimenter id specified. */
OFPERR_OFPBIC_BAD_EXPERIMENTER,
/* OF1.1(3,5), OF1.2+(3,6). Unknown instruction for experimenter id. */
OFPERR_OFPBIC_BAD_EXP_TYPE,
/* OF1.2+(3,7). Length problem in instructions. */
OFPERR_OFPBIC_BAD_LEN,
/* OF1.2+(3,8). Permissions error. */
OFPERR_OFPBIC_EPERM,
/* NX1.1(3,256), ONF1.2-1.3(2600), OF1.4+(3,9). Duplicate instruction. */
OFPERR_OFPBIC_DUP_INST,
/* ## --------------- ## */
/* ## OFPET_BAD_MATCH ## */
/* ## --------------- ## */
/* OF1.1+(4,0). Unsupported match type specified by the match */
OFPERR_OFPBMC_BAD_TYPE,
/* OF1.1+(4,1). Length problem in match. */
OFPERR_OFPBMC_BAD_LEN,
/* OF1.1+(4,2). Match uses an unsupported tag/encap. */
OFPERR_OFPBMC_BAD_TAG,
/* OF1.1+(4,3). Unsupported datalink addr mask - switch does not support
* arbitrary datalink address mask. */
OFPERR_OFPBMC_BAD_DL_ADDR_MASK,
/* OF1.1+(4,4). Unsupported network addr mask - switch does not support
* arbitrary network address mask. */
OFPERR_OFPBMC_BAD_NW_ADDR_MASK,
/* NX1.0(1,262), OF1.1+(4,5). Unsupported wildcard specified in the
* match. */
OFPERR_OFPBMC_BAD_WILDCARDS,
/* NX1.0(0,263), OF1.1+(4,6). Unsupported field in the match. */
OFPERR_OFPBMC_BAD_FIELD,
/* NX1.0(1,258), OF1.1+(4,7). Unsupported value in a match
* field. */
OFPERR_OFPBMC_BAD_VALUE,
/* NX1.0-1.1(1,259), OF1.2+(4,8). Unsupported mask specified in the
* match. */
OFPERR_OFPBMC_BAD_MASK,
/* NX1.0-1.1(1,260), OF1.2+(4,9). A prerequisite was not met. */
OFPERR_OFPBMC_BAD_PREREQ,
/* NX1.0-1.1(1,261), OF1.2+(4,10). A field type was duplicated. */
OFPERR_OFPBMC_DUP_FIELD,
/* OF1.2+(4,11). Permissions error. */
OFPERR_OFPBMC_EPERM,
/* NX1.0-1.1(1,264), NX1.2+(43). Flow match requires connection tracking
* or a particular connection-tracking based feature that the datapath in
* use does not support. If a kernel-based datapath is in use, the kernel
* module may need to be upgraded. */
OFPERR_NXBMC_CT_DATAPATH_SUPPORT,
/* ## --------------------- ## */
/* ## OFPET_FLOW_MOD_FAILED ## */
/* ## --------------------- ## */
/* OF1.1+(5,0). Unspecified error. */
OFPERR_OFPFMFC_UNKNOWN,
/* OF1.0(3,0), OF1.1+(5,1). Flow not added because of full table(s). */
OFPERR_OFPFMFC_TABLE_FULL,
/* OF1.1+(5,2). Table does not exist */
OFPERR_OFPFMFC_BAD_TABLE_ID,
/* OF1.0(3,1), OF1.1+(5,3). Attempted to add overlapping flow with
* CHECK_OVERLAP flag set. */
OFPERR_OFPFMFC_OVERLAP,
/* OF1.0(3,2), OF1.1+(5,4). Permissions error. */
OFPERR_OFPFMFC_EPERM,
/* OF1.1+(5,5). Flow not added because of unsupported idle/hard
* timeout. */
OFPERR_OFPFMFC_BAD_TIMEOUT,
/* OF1.0(3,3). Flow not added because of non-zero idle/hard timeout. */
OFPERR_OFPFMFC_BAD_EMERG_TIMEOUT,
/* OF1.0(3,4), OF1.1+(5,6). Unsupported or unknown command. */
OFPERR_OFPFMFC_BAD_COMMAND,
/* NX1.0(3,258), NX1.1(5,258), OF1.2+(5,7). Unsupported or unknown
* flags. */
OFPERR_OFPFMFC_BAD_FLAGS,
/* OF1.4+(5,8). Problem in table synchronization. */
OFPERR_OFPFMFC_CANT_SYNC,
/* ONF1.3(2360), OF1.4+(5,9). Unsupported priority value. */
OFPERR_OFPFMFC_BAD_PRIORITY,
/* OF1.4+(5,10). Synchronized flow entry is read only. */
OFPERR_OFPFMFC_IS_SYNC,
/* OF1.0(3,5). Unsupported action list - cannot process in the order
* specified. */
OFPERR_OFPFMFC_UNSUPPORTED,
/* NX1.0-1.1(5,256), NX1.2+(12). Generic hardware error. */
OFPERR_NXFMFC_HARDWARE,
/* NX1.0-1.1(5,257), NX1.2+(13). A nonexistent table ID was specified in
* the "command" field of struct ofp_flow_mod, when the
* nxt_flow_mod_table_id extension is enabled. */
OFPERR_NXFMFC_BAD_TABLE_ID,
/* NX1.0-1.1(1,536), NX1.2+(37). Attempted to add a flow with an invalid
* variable length meta-flow field. */
OFPERR_NXFMFC_INVALID_TLV_FIELD,
/* ## ---------------------- ## */
/* ## OFPET_GROUP_MOD_FAILED ## */
/* ## ---------------------- ## */
/* NX1.0(6,0), OF1.1+(6,0). Group not added because a group ADD attempted
* to replace an already-present group. */
OFPERR_OFPGMFC_GROUP_EXISTS,
/* NX1.0(6,1), OF1.1+(6,1). Group not added because Group specified is
* invalid. */
OFPERR_OFPGMFC_INVALID_GROUP,
/* NX1.0(6,2), OF1.1+(6,2). Switch does not support unequal load sharing
* with select groups. */
OFPERR_OFPGMFC_WEIGHT_UNSUPPORTED,
/* NX1.0(6,3), OF1.1+(6,3). The group table is full. */
OFPERR_OFPGMFC_OUT_OF_GROUPS,
/* NX1.0(6,4), OF1.1+(6,4). The maximum number of action buckets for a
* group has been exceeded. */
OFPERR_OFPGMFC_OUT_OF_BUCKETS,
/* NX1.0(6,5), OF1.1+(6,5). Switch does not support groups that forward to
* groups. */
OFPERR_OFPGMFC_CHAINING_UNSUPPORTED,
/* NX1.0(6,6), OF1.1+(6,6). This group cannot watch the watch_port or
* watch_group specified. */
OFPERR_OFPGMFC_WATCH_UNSUPPORTED,
/* NX1.0(6,7), OF1.1+(6,7). Group entry would cause a loop. */
OFPERR_OFPGMFC_LOOP,
/* NX1.0(6,8), OF1.1+(6,8). Group not modified because a group MODIFY
* attempted to modify a non-existent group. */
OFPERR_OFPGMFC_UNKNOWN_GROUP,
/* NX1.0(6,9), OF1.2+(6,9). Group not deleted because another group is
* forwarding to it. */
OFPERR_OFPGMFC_CHAINED_GROUP,
/* NX1.0(6,10), OF1.2+(6,10). Unsupported or unknown group type. */
OFPERR_OFPGMFC_BAD_TYPE,
/* NX1.0(6,11), OF1.2+(6,11). Unsupported or unknown command. */
OFPERR_OFPGMFC_BAD_COMMAND,
/* NX1.0(6,12), OF1.2+(6,12). Error in bucket. */
OFPERR_OFPGMFC_BAD_BUCKET,
/* NX1.0(6,13), OF1.2+(6,13). Error in watch port/group. */
OFPERR_OFPGMFC_BAD_WATCH,
/* NX1.0(6,14), OF1.2+(6,14). Permissions error. */
OFPERR_OFPGMFC_EPERM,
/* NX1.0(6,15), OF1.5+(6,15). Invalid bucket identifier used in INSERT
* BUCKET or REMOVE BUCKET command. */
OFPERR_OFPGMFC_UNKNOWN_BUCKET,
/* NX1.0(6,16), OF1.5+(6,16). Can't insert bucket because a bucket already
* exist with that bucket-id. */
OFPERR_OFPGMFC_BUCKET_EXISTS,
/* ## --------------------- ## */
/* ## OFPET_PORT_MOD_FAILED ## */
/* ## --------------------- ## */
/* OF1.0(4,0), OF1.1+(7,0). Specified port does not exist. */
OFPERR_OFPPMFC_BAD_PORT,
/* OF1.0(4,1), OF1.1+(7,1). Specified hardware address does not match the
* port number. */
OFPERR_OFPPMFC_BAD_HW_ADDR,
/* OF1.1+(7,2). Specified config is invalid. */
OFPERR_OFPPMFC_BAD_CONFIG,
/* OF1.1+(7,3). Specified advertise is invalid. */
OFPERR_OFPPMFC_BAD_ADVERTISE,
/* OF1.2+(7,4). Permissions error. */
OFPERR_OFPPMFC_EPERM,
/* ## ---------------------- ## */
/* ## OFPET_TABLE_MOD_FAILED ## */
/* ## ---------------------- ## */
/* OF1.1+(8,0). Specified table does not exist. */
OFPERR_OFPTMFC_BAD_TABLE,
/* OF1.1+(8,1). Specified config is invalid. */
OFPERR_OFPTMFC_BAD_CONFIG,
/* OF1.2+(8,2). Permissions error. */
OFPERR_OFPTMFC_EPERM,
/* ## --------------------- ## */
/* ## OFPET_QUEUE_OP_FAILED ## */
/* ## --------------------- ## */
/* OF1.0(5,0), OF1.1+(9,0). Invalid port (or port does not exist). */
OFPERR_OFPQOFC_BAD_PORT,
/* OF1.0(5,1), OF1.1+(9,1). Queue does not exist. */
OFPERR_OFPQOFC_BAD_QUEUE,
/* OF1.0(5,2), OF1.1+(9,2). Permissions error. */
OFPERR_OFPQOFC_EPERM,
/* NX1.4+(23). System error retrieving queue details. */
OFPERR_NXQOFC_QUEUE_ERROR,
/* ## -------------------------- ## */
/* ## OFPET_SWITCH_CONFIG_FAILED ## */
/* ## -------------------------- ## */
/* OF1.1+(10,0). Specified flags is invalid. */
OFPERR_OFPSCFC_BAD_FLAGS,
/* OF1.1+(10,1). Specified len is invalid. */
OFPERR_OFPSCFC_BAD_LEN,
/* OF1.2+(10,2). Permissions error. */
OFPERR_OFPSCFC_EPERM,
/* ## ------------------------- ## */
/* ## OFPET_ROLE_REQUEST_FAILED ## */
/* ## ------------------------- ## */
/* OF1.2+(11,0). Stale Message: old generation_id. */
OFPERR_OFPRRFC_STALE,
/* OF1.2+(11,1). Controller role change unsupported. */
OFPERR_OFPRRFC_UNSUP,
/* NX1.0-1.1(1,513), OF1.2+(11,2). Invalid role. */
OFPERR_OFPRRFC_BAD_ROLE,
/* OF1.5+(11,3). Switch doesn't support changing ID. */
OFPERR_OFPRRFC_ID_UNSUP,
/* OF1.5+(11,4). Requested ID is in use. */
OFPERR_OFPRRFC_ID_IN_USE,
/* ## ---------------------- ## */
/* ## OFPET_METER_MOD_FAILED ## */
/* ## ---------------------- ## */
/* OF1.3+(12,0). Unspecified error. */
OFPERR_OFPMMFC_UNKNOWN,
/* OF1.3+(12,1). Meter not added because a Meter ADD attempted to
* replace an existing Meter. */
OFPERR_OFPMMFC_METER_EXISTS,
/* OF1.3+(12,2). Meter not added because meter specified is invalid, or
* invalid meter in meter action. */
OFPERR_OFPMMFC_INVALID_METER,
/* OF1.3+(12,3). Meter not modified because a Meter MODIFY attempted
* to modify a non-existent meter, or bad meter in meter action. */
OFPERR_OFPMMFC_UNKNOWN_METER,
/* OF1.3+(12,4). Unsupported or unknown command. */
OFPERR_OFPMMFC_BAD_COMMAND,
/* OF1.3+(12,5). Flag configuration unsupported. */
OFPERR_OFPMMFC_BAD_FLAGS,
/* OF1.3+(12,6). Rate unsupported. */
OFPERR_OFPMMFC_BAD_RATE,
/* OF1.3+(12,7). Burst size unsupported. */
OFPERR_OFPMMFC_BAD_BURST,
/* OF1.3+(12,8). Band unsupported. */
OFPERR_OFPMMFC_BAD_BAND,
/* OF1.3+(12,9). Band value unsupported. */
OFPERR_OFPMMFC_BAD_BAND_VALUE,
/* OF1.3+(12,10). No more meters available. */
OFPERR_OFPMMFC_OUT_OF_METERS,
/* OF1.3+(12,11). The maximum number of properties for a meter has
* been exceeded. */
OFPERR_OFPMMFC_OUT_OF_BANDS,
/* ## --------------------------- ## */
/* ## OFPET_TABLE_FEATURES_FAILED ## */
/* ## --------------------------- ## */
/* OF1.3+(13,0). Specified table does not exist. */
OFPERR_OFPTFFC_BAD_TABLE,
/* OF1.3+(13,1). Invalid metadata mask. */
OFPERR_OFPTFFC_BAD_METADATA,
/* OF1.3+(13,5). Permissions error. */
OFPERR_OFPTFFC_EPERM,
/* OF1.5+(13,6). Invalid capability field. */
OFPERR_OFPTFFC_BAD_CAPA,
/* OF1.5+(13,7). Invalid max_entries field. */
OFPERR_OFPTFFC_BAD_MAX_ENT,
/* OF1.5+(13,8). Invalid features field. */
OFPERR_OFPTFFC_BAD_FEATURES,
/* OF1.5+(13,9). Invalid command. */
OFPERR_OFPTFFC_BAD_COMMAND,
/* OF1.5+(13,10). Can't handle this many flow tables. */
OFPERR_OFPTFFC_TOO_MANY,
/* NX1.3+(44). Table specified multiple times. */
OFPERR_NXTFFC_DUP_TABLE,
/* ## ------------------ ## */
/* ## OFPET_BAD_PROPERTY ## */
/* ## ------------------ ## */
/* NX1.0-1.1(13,2), NX1.2(25), OF1.3(13,2), OF1.4+(14,0). Unknown or
* unsupported property type.
*
* [Known as OFPTFFC_BAD_TYPE in OF1.3.] */
OFPERR_OFPBPC_BAD_TYPE,
/* NX1.0-1.1(13,3), NX1.2(26), OF1.3(13,3), OF1.4+(14,1). Length problem
* in property.
*
* [Known as OFPTFFC_BAD_LEN in OF1.3.] */
OFPERR_OFPBPC_BAD_LEN,
/* NX1.0-1.1(13,4), NX1.2(27), OF1.3(13,4), OF1.4+(14,2). Unsupported
* property value.
*
* [Known as OFPTFFC_BAD_ARGUMENT in OF1.3.] */
OFPERR_OFPBPC_BAD_VALUE,
/* NX1.0-1.1(14,3), NX1.2(28), ONF1.3(4443), OF1.4+(14,3). Can't handle
* this many properties. */
OFPERR_OFPBPC_TOO_MANY,
/* NX1.0-1.1(14,4), NX1.2(29), ONF1.3(4444), OF1.4+(14,4). A property type
* was duplicated. */
OFPERR_OFPBPC_DUP_TYPE,
/* NX1.0-1.1(14,5), NX1.2(30), ONF1.3(4445), OF1.4+(14,5). Unknown
* experimenter id specified. */
OFPERR_OFPBPC_BAD_EXPERIMENTER,
/* NX1.0-1.1(14,6), NX1.2(31), ONF1.3(4446), OF1.4+(14,6). Unknown
* exp_type for experimenter id. */
OFPERR_OFPBPC_BAD_EXP_TYPE,
/* NX1.0-1.1(14,7), NX1.2(32), ONF1.3(4447), OF1.4+(14,7). Unknown value
* for experimenter id. */
OFPERR_OFPBPC_BAD_EXP_VALUE,
/* NX1.0-1.1(14,8), NX1.2(33), ONF1.3(4448), OF1.4+(14,8). Permissions
* error. */
OFPERR_OFPBPC_EPERM,
/* ## -------------------------- ## */
/* ## OFPET_ASYNC_CONFIG_FAILED ## */
/* ## -------------------------- ## */
/* ONF1.3(2370), OF1.4+(15,0). One mask is invalid. */
OFPERR_OFPACFC_INVALID,
/* ONF1.3(2371), OF1.4+(15,1). Requested configuration not supported. */
OFPERR_OFPACFC_UNSUPPORTED,
/* ONF1.3(2372), OF1.4+(15,2). Permissions error. */
OFPERR_OFPACFC_EPERM,
/* ## -------------------- ## */
/* ## OFPET_BUNDLE_FAILED ## */
/* ## -------------------- ## */
/* ONF1.3(2300), OF1.4+(17,0). Unspecified error. */
OFPERR_OFPBFC_UNKNOWN,
/* ONF1.3(2301), OF1.4+(17,1). Permissions error. */
OFPERR_OFPBFC_EPERM,
/* ONF1.3(2302), OF1.4+(17,2). Bundle ID doesn't exist. */
OFPERR_OFPBFC_BAD_ID,
/* ONF1.3(2303), OF1.4+(17,3). Bundle ID already exists. */
OFPERR_OFPBFC_BUNDLE_EXIST,
/* ONF1.3(2304), OF1.4+(17,4). Bundle ID is closed. */
OFPERR_OFPBFC_BUNDLE_CLOSED,
/* ONF1.3(2305), OF1.4+(17,5). Too many bundle IDs. */
OFPERR_OFPBFC_OUT_OF_BUNDLES,
/* ONF1.3(2306), OF1.4+(17,6). Unsupported of unknown message control
* type. */
OFPERR_OFPBFC_BAD_TYPE,
/* ONF1.3(2307), OF1.4+(17,7). Unsupported, unknown, or inconsistent
* flags. */
OFPERR_OFPBFC_BAD_FLAGS,
/* ONF1.3(2308), OF1.4+(17,8). Length problem in included message. */
OFPERR_OFPBFC_MSG_BAD_LEN,
/* ONF1.3(2309), OF1.4+(17,9). Inconsistent or duplicate XID. */
OFPERR_OFPBFC_MSG_BAD_XID,
/* ONF1.3(2310), OF1.4+(17,10). Unsupported message in this bundle. */
OFPERR_OFPBFC_MSG_UNSUP,
/* ONF1.3(2311), OF1.4+(17,11). Unsupported message combination in this
* bundle. */
OFPERR_OFPBFC_MSG_CONFLICT,
/* ONF1.3(2312), OF1.4+(17,12). Cant handle this many messages in
* bundle. */
OFPERR_OFPBFC_MSG_TOO_MANY,
/* ONF1.3(2313), OF1.4+(17,13). One message in bundle failed. */
OFPERR_OFPBFC_MSG_FAILED,
/* ONF1.3(2314), OF1.4+(17,14). Bundle is taking too long. */
OFPERR_OFPBFC_TIMEOUT,
/* ONF1.3(2315), OF1.4+(17,15). Bundle is locking the resource. */
OFPERR_OFPBFC_BUNDLE_IN_PROGRESS,
/* OF1.5+(17,16). Scheduled commit was received and scheduling is not
* supported. */
OFPERR_OFPBFC_SCHED_NOT_SUPPORTED,
/* OF1.5+(17,17). Scheduled commit time exceeds upper bound. */
OFPERR_OFPBFC_SCHED_FUTURE,
/* OF1.5+(17,18). Scheduled commit time exceeds lower bound. */
OFPERR_OFPBFC_SCHED_PAST,
/* NX1.4-1.5(22). In an OFPT_BUNDLE_ADD_MESSAGE, the OpenFlow version in
* the inner and outer messages differ. */
OFPERR_OFPBFC_BAD_VERSION,
/* ## ------------------------- ## */
/* ## OFPET_FLOW_MONITOR_FAILED ## */
/* ## ------------------------- ## */
/* OF1.4+(16,0). Unspecified error. */
OFPERR_OFPMOFC_UNKNOWN,
/* NX1.0-1.1(1,517), NX1.2-1.3(6), OF1.4+(16,1). Monitor not added
* because a Monitor ADD attempted to replace an existing Monitor. */
OFPERR_OFPMOFC_MONITOR_EXISTS,
/* OF1.4+(16,2). Monitor not added because
* Monitor specified is invalid. */
OFPERR_OFPMOFC_INVALID_MONITOR,
/* NX1.0-1.1(1,519), NX1.2-1.3(8), OF1.4+(16,3). Monitor not modified
* because a Monitor MODIFY attempted to modify a non-existent Monitor. */
OFPERR_OFPMOFC_UNKNOWN_MONITOR,
/* OF1.4+(16,4). Unsupported or unknown command. */
OFPERR_OFPMOFC_BAD_COMMAND,
/* NX1.0-1.1(1,518), NX1.2-1.3(7), OF1.4+(16,5). Flag configuration
* unsupported. */
OFPERR_OFPMOFC_BAD_FLAGS,
/* OF1.4+(16,6). Specified table does not exist. */
OFPERR_OFPMOFC_BAD_TABLE_ID,
/* OF1.4+(16,7). Error in output port/group. */
OFPERR_OFPMOFC_BAD_OUT,
/* ## ----------------------------- ## */
/* ## OFPET_TLV_TABLE_MOD_FAILED ## */
/* ## ----------------------------- ## */
/* NX1.0-1.1(1,527), NX1.2+(16). The TLV table mod command is not
* recognized as a valid operation. */
OFPERR_NXTTMFC_BAD_COMMAND,
/* NX1.0-1.1(1,528), NX1.2+(17). The option length is not a valid
* option size for TLVs. */
OFPERR_NXTTMFC_BAD_OPT_LEN,
/* NX1.0-1.1(1,529), NX1.2+(18). The field index is out of range for
* the supported NX_TUN_METADATA<n> match. */
OFPERR_NXTTMFC_BAD_FIELD_IDX,
/* NX1.0-1.1(1,530), NX1.2+(19). The total set of configured options
* exceeds the maximum supported by the switch. */
OFPERR_NXTTMFC_TABLE_FULL,
/* NX1.0-1.1(1,531), NX1.2+(20). The controller issued an NXTTMC_ADD
* command for a field index that is already mapped. */
OFPERR_NXTTMFC_ALREADY_MAPPED,
/* NX1.0-1.1(1,532), NX1.2+(21). The option TLV that is attempting
* to be mapped is the same as one assigned to a different field. */
OFPERR_NXTTMFC_DUP_ENTRY,
/* NX1.0-1.1(1,537), NX1.2+(38). Attempted to delete a TLV mapping that
* is used by any active flow. */
OFPERR_NXTTMFC_INVALID_TLV_DEL,
/* ## ---------- ## */
/* ## NXT_RESUME ## */
/* ## ---------- ## */
/* NX1.0-1.1(1,533), NX1.2+(34). This datapath doesn't support
* NXT_RESUME. */
OFPERR_NXR_NOT_SUPPORTED,
/* NX1.0-1.1(1,534), NX1.2+(35). Continuation is stale: Open vSwitch
* process has been restarted or bridge has been destroyed since
* continuation was generated, or continuation was not generated by this
* Open vSwitch instance. */
OFPERR_NXR_STALE,
/* ## ---------- ## */
/* ## NXT_STATS ## */
/* ## ---------- ## */
/* NX1.0-1.1(1,535), NX1.2+(36). Protocol is not configured on this
* Open vSwitch instance. */
OFPERR_NXST_NOT_CONFIGURED,
};
const char *ofperr_domain_get_name(enum ofp_version);
bool ofperr_is_valid(enum ofperr);
enum ofperr ofperr_from_name(const char *);
enum ofperr ofperr_decode_msg(const struct ofp_header *,
struct ofpbuf *payload);
struct ofpbuf *ofperr_encode_reply(enum ofperr, const struct ofp_header *);
struct ofpbuf *ofperr_encode_hello(enum ofperr, enum ofp_version ofp_version,
const char *);
void ofperr_msg_format(struct ds *, enum ofperr, const struct ofpbuf *payload,
const struct ofputil_port_map *,
const struct ofputil_table_map *);
int ofperr_get_vendor(enum ofperr, enum ofp_version);
int ofperr_get_type(enum ofperr, enum ofp_version);
int ofperr_get_code(enum ofperr, enum ofp_version);
const char *ofperr_get_name(enum ofperr);
const char *ofperr_get_description(enum ofperr);
void ofperr_format(struct ds *, enum ofperr);
const char *ofperr_to_string(enum ofperr);
#ifdef __cplusplus
}
#endif
#endif /* ofp-errors.h */
Reference in New Issue View Git Blame Copy Permalink