mirror of
https://github.com/openvswitch/ovs
synced 2025-08-22 01:51:26 +00:00
68d742e84e
Remove documentation relating to the OOT kernel module as this no longer seems useful. Support for the OOT module was removed in the v3.0 release of Open vSwitch. And is now no longer supported by any maintained versions of Open vSwitch. Acked-by: Eelco Chaudron <echaudro@redhat.com> Signed-off-by: Simon Horman <horms@ovn.org>
Here's an example configuration for your /etc/network/interfaces
using a simple ovsbr0 bridge for eth0, with dhcp for ipv4 and ipv6.
This was taken from https://bugs.debian.org/860786.
auto ovsbr0
iface ovsbr0 inet dhcp
ovs_type OVSBridge
ovs_ports eth0
auto ovsbr0
iface ovsbr0 inet6 dhcp
ovs_type OVSBridge
ovs_ports eth0
autobr0 eth0
iface eth0 inet manual
ovs_bridge ovsbr0
ovs_type OVSPort
However, this didn't work for me. Instead, this worked:
auto br0
iface br0 inet dhcp
ovs_type OVSBridge
ovs_port enp0s3
auto enp0s3
iface enp0s3 inet manual
ovs_bridge br0
ovs_type OVSPort
up ip address add 0/0 dev enp0s3
up ip link set enp0s3 up
up dhclient br0
down ip link set enp0s3 down
-- Antoine Beaupré <anarcat@debian.org>, Wed, 22 Jun 2022 12:02:39 -0400