Many parsing and formatting C functions like strtof() and asprintf() are
locale-dependent. Forcing a C locale just for the conversions in a way
that works on all platforms is a mess.
In practice, this is not a problem, scrcpy always uses the C locale,
because it never calls:
setlocale(LC_ALL, "");
But the max-fps option should not depend on the locale configuration
anyway.
Since the value is parsed by the client in Java anyway, just forward the
string value as is.
Android accepts a float value, there is no reason to limit the option
to be an integer.
In particular, it allows to capture at a rate lower than 1 fps. For
example, to capture 1 frame every 5 seconds:
scrcpy --video-source=camera --max-fps=0.2
It was already possible to pass a float manually:
scrcpy --video-source=camera \
--video-codec-options=max-fps-to-encoder:float=0.2
But accepting a float directly for --max-fps is more convenient.
Refs <https://developer.android.com/reference/android/media/MediaFormat#KEY_MAX_FPS_TO_ENCODER>
"Could not" implies that the system tried to disable the option but
encountered an issue or failure.
"Cannot" indicates a rule or restriction, meaning it's not possible to
perform the action at all.
Automatically switch implicit audio source to "playback" if --audio-dup
is passed.
This allows to run:
scrcpy --audio-dup
without specifying explicitly:
scrcpy --audio-source=playback --audio-dup
PR #5102 <https://github.com/Genymobile/scrcpy/pull/5102>
Add a new method to capture audio playback.
It requires Android 13 (where the Shell app has MODIFY_AUDIO_ROUTING
permission).
The main benefit is that it supports keeping audio playing on the device
(implemented in a further commit).
Fixes#4380 <https://github.com/Genymobile/scrcpy/issues/4380>
PR #5102 <https://github.com/Genymobile/scrcpy/pull/5102>
Co-authored-by: Simon Chan <1330321+yume-chan@users.noreply.github.com>
Add secondary bindings (Shift+click) for mouse buttons.
In addition to:
--mouse-bind=xxxx
It is now possible to pass a sequence of secondary bindings:
--mouse-bind=xxxx:xxxx
<--> <-->
primary secondary
bindings bindings
If the second sequence is omitted, then it is the same as the first one.
By default, for SDK mouse, primary bindings trigger shortcuts and
secondary bindings forward all clicks.
For AOA and UHID, the default bindings are reversed: all clicks are
forwarded by default, whereas pressing Shift+click trigger shortcuts.
--mouse-bind=bhsn:++++ # default for SDK
--mouse-bind=++++:bhsn # default for AOA and UHID
Refs 035d60cf5d3f4c83d48735b4cb4cd108a5b5f413
Refs f5e6b8092afd82bab402e7c2c3d00b1719f9bb57
Fixes#5055 <https://github.com/Genymobile/scrcpy/issues/5055>
PR #5076 <https://github.com/Genymobile/scrcpy/pull/5076>
By default, only the left click is forwarded to the device, and
secondary clicks trigger shortcuts (the behavior can be configured by
--mouse-bind=xxxx).
But when the mouse mode is relative (AOA and UHID modes), forward all
clicks by default. This makes more sense since the cursor is handled on
the device side, the user expects all mouse buttons to be forwarded.
Refs <https://github.com/Genymobile/scrcpy/issues/4727#issuecomment-2069869750>
PR #5022 <https://github.com/Genymobile/scrcpy/pull/5022>
Add a new option --mouse-bind=xxxx.
The argument must be exactly 4 characters, one for each secondary click:
--mouse-bind=xxxx
^^^^
||||
||| `- 5th click
|| `-- 4th click
| `--- middle click
`---- right click
Each character must be one of the following:
- `+`: forward the click to the device
- `-`: ignore the click
- `b`: trigger shortcut BACK (or turn screen on if off)
- `h`: trigger shortcut HOME
- `s`: trigger shortcut APP_SWITCH
- `n`: trigger shortcut "expand notification panel"
This deprecates --forward-all-clicks (use --mouse-bind=++++ instead).
Refs <https://github.com/Genymobile/scrcpy/pull/2258#issuecomment-2182394460>
PR #5022 <https://github.com/Genymobile/scrcpy/pull/5022>
Restrict shortcut modifiers to be composed of only one item each.
Before, it was possible to select a list of multiple combinations of
modifier keys, like --shortcut-mod='lctrl+lalt,rctrl+rsuper', meaning
that shortcuts would be triggered either by LCtrl+LAlt+key or
RCtrl+RSuper+key.
This was overly generic, probably not used very much, and it prevents to
solve inconsistencies between UP and DOWN events of modifier keys sent
to the device.
Refs #4732 <https://github.com/Genymobile/scrcpy/issues/4732>
PR #4741 <https://github.com/Genymobile/scrcpy/pull/4741>
The options were deprecated, but for convenience, reassign them to
aliases for --keyboard=uhid and --mouse=uhid respectively.
Their long version (--hid-keyboard and --hid-mouse) remain deprecated.
PR #4473 <https://github.com/Genymobile/scrcpy/pull/4473>
The keyboard settings can be opened by:
adb shell am start -a android.settings.HARD_KEYBOARD_SETTINGS
Add a shortcut (MOD+k) for convenience if the current keyboard is HID.
PR #4473 <https://github.com/Genymobile/scrcpy/pull/4473>
Until now, there was two modes for keyboard and mouse:
- event injection using the Android system API (default)
- HID/AOA over USB
For this reason, the options were exposed as simple flags:
- -K or --hid-keyboard to enable physical keyboard simulation (AOA)
- -M or --hid-mouse to enable physical mouse simulation (AOA)
Replace them by explicit --keyboard and --mouse options, with 3 possible
values:
- disabled
- sdk (default)
- aoa
This will allow to add a new mode (uhid).
PR #4473 <https://github.com/Genymobile/scrcpy/pull/4473>
Co-authored-by: Romain Vimont <rom@rom1v.com>
Signed-off-by: Romain Vimont <rom@rom1v.com>
Power on the device on start only if video capture is enabled.
Note that it only impacts display mirroring, since control is completely
disabled if video source is camera.
Refs 110b3a16f6d02124a4567d2ab79fcb74d78f949f
Fix the following warning/error:
../app/src/cli.c:2158:17: warning: a label can only be part of a
statement and a declaration is not a statement [-Wpedantic]
With some compilers, this is an error rather than a pedantic warning.
Refs <https://github.com/Genymobile/scrcpy/issues/2256#issuecomment-1467008307>
FLAC is not low latency: the default encoder produces blocks of 4096
samples, which represent ~85.333ms.
Increase the audio buffer by default so that audio playback works.
Add --camera-high-speed to enable high frame rate camera capture. If
the option is enabled, then --camera-fps is mandatory.
PR #4213 <https://github.com/Genymobile/scrcpy/pull/4213>
Co-authored-by: Romain Vimont <rom@rom1v.com>
Signed-off-by: Andrew Gunnerson <accounts+github@chiller3.com>
Signed-off-by: Romain Vimont <rom@rom1v.com>
Add a new option for specifying the camera frame rate.
By default, Android's default frame rate (30 fps) is used.
PR #4213 <https://github.com/Genymobile/scrcpy/pull/4213>
Signed-off-by: Andrew Gunnerson <accounts+github@chiller3.com>
Signed-off-by: Romain Vimont <rom@rom1v.com>
In addition to --camera-size to specify an explicit size, make it
possible to select the camera size automatically, respecting the maximum
size (already used for display mirroring) and an aspect ratio.
For example, "scrcpy --video-source=camera" followed by:
- (no additional arguments)
: mirrors at the maximum size, any a-r
- -m1920
: only consider valid sizes having both dimensions not above 1920
- --camera-ar=4:3
: only consider valid sizes having an aspect ratio of 4:3 (+/- 10%)
- -m2048 --camera-ar=1.6
: only consider valid sizes having both dimensions not above 2048
and an aspect ratio of 1.6 (+/- 10%)
PR #4213 <https://github.com/Genymobile/scrcpy/pull/4213>
Co-authored-by: Simon Chan <1330321+yume-chan@users.noreply.github.com>
Add an option to select the camera by its lens facing (front, back or
external).
PR #4213 <https://github.com/Genymobile/scrcpy/pull/4213>
Co-authored-by: Romain Vimont <rom@rom1v.com>
Signed-off-by: Romain Vimont <rom@rom1v.com>
If --audio-source is not specified, select the default value
according to the video source:
- for display mirroring, use device audio by default;
- for camera mirroring, use microphone by default.
PR #4213 <https://github.com/Genymobile/scrcpy/pull/4213>
