Merge from trunk rev 1475: fixSubDomain.pm to take truncate, rename_src,

rename_dest, and mkdir operations into account, as well as add logparsing library testcases for those operations. Bug: https://bugs.launchpad.net/apparmor/+bug/623467 Nominated-by: Steve Beattie <sbeattie@ubuntu.com> Acked-By: Steve Beattie <sbeattie@ubuntu.com>
Fix minor build warning on rpm based systems.
2025-09-01 14:55:10 +00:00 · 2010-09-21 00:40:50 -07:00 · 2010-09-20 11:40:32 -07:00 · 2010-09-16 10:13:11 -07:00 · 2010-09-16 05:37:53 -07:00 · 2010-09-16 02:25:59 -07:00
3076 changed files with 122413 additions and 191854 deletions
--- a/.gitignore
+++ b/.gitignore
@@ -1,262 +0,0 @@
-apparmor-*
-cscope.*
-binutils/aa-enabled
-binutils/aa-enabled.1
-binutils/aa-exec
-binutils/aa-exec.1
-binutils/po/*.mo
-parser/po/*.mo
-parser/af_names.h
-parser/cap_names.h
-parser/tst_lib
-parser/tst_misc
-parser/tst_regex
-parser/tst_symtab
-parser/tst_variable
-parser/tst/simple_tests/generated_*/*
-parser/parser_lex.c
-parser/parser_version.h
-parser/parser_yacc.c
-parser/parser_yacc.h
-parser/pod2htm*.tmp
-parser/af_rule.o
-parser/af_unix.o
-parser/common_optarg.o
-parser/dbus.o
-parser/lib.o
-parser/libapparmor_re/aare_rules.o
-parser/libapparmor_re/chfa.o
-parser/libapparmor_re/expr-tree.o
-parser/libapparmor_re/hfa.o
-parser/libapparmor_re/libapparmor_re.a
-parser/libapparmor_re/parse.o
-parser/mount.o
-parser/network.o
-parser/parser_alias.o
-parser/parser_common.o
-parser/parser_include.o
-parser/parser_interface.o
-parser/parser_lex.o
-parser/parser_main.o
-parser/parser_merge.o
-parser/parser_misc.o
-parser/parser_policy.o
-parser/parser_regex.o
-parser/parser_symtab.o
-parser/parser_variable.o
-parser/parser_yacc.o
-parser/policy_cache.o
-parser/profile.o
-parser/ptrace.o
-parser/rule.o
-parser/signal.o
-parser/*.7
-parser/*.5
-parser/*.8
-parser/*.7.html
-parser/*.5.html
-parser/*.8.html
-parser/apparmor_parser
-parser/libapparmor_re/parse.cc
-parser/libapparmor_re/regexp.cc
-parser/techdoc.aux
-parser/techdoc.log
-parser/techdoc.pdf
-parser/techdoc.toc
-profiles/apparmor.d/local/*
-!profiles/apparmor.d/local/README
-libraries/libapparmor/Makefile
-libraries/libapparmor/Makefile.in
-libraries/libapparmor/aclocal.m4
-libraries/libapparmor/audit.log
-libraries/libapparmor/autom4te.cache
-libraries/libapparmor/compile
-libraries/libapparmor/config.guess
-libraries/libapparmor/config.log
-libraries/libapparmor/config.status
-libraries/libapparmor/config.sub
-libraries/libapparmor/configure
-libraries/libapparmor/depcomp
-libraries/libapparmor/install-sh
-libraries/libapparmor/libtool
-libraries/libapparmor/ltmain.sh
-libraries/libapparmor/missing
-libraries/libapparmor/test-driver
-libraries/libapparmor/ylwrap
-libraries/libapparmor/doc/Makefile
-libraries/libapparmor/doc/Makefile.in
-libraries/libapparmor/doc/*.2
-libraries/libapparmor/doc/aa_*.3
-libraries/libapparmor/include/Makefile
-libraries/libapparmor/include/Makefile.in
-libraries/libapparmor/include/sys/Makefile
-libraries/libapparmor/include/sys/Makefile.in
-libraries/libapparmor/src/.deps
-libraries/libapparmor/src/.libs
-libraries/libapparmor/src/Makefile
-libraries/libapparmor/src/Makefile.in
-libraries/libapparmor/src/PMurHash.lo
-libraries/libapparmor/src/PMurHash.o
-libraries/libapparmor/src/af_protos.h
-libraries/libapparmor/src/change_hat.lo
-libraries/libapparmor/src/features.lo
-libraries/libapparmor/src/features.o
-libraries/libapparmor/src/grammar.lo
-libraries/libapparmor/src/grammar.o
-libraries/libapparmor/src/kernel.lo
-libraries/libapparmor/src/kernel.o
-libraries/libapparmor/src/kernel_interface.lo
-libraries/libapparmor/src/kernel_interface.o
-libraries/libapparmor/src/libaalogparse.lo
-libraries/libapparmor/src/libaalogparse.o
-libraries/libapparmor/src/libimmunix_warning.lo
-libraries/libapparmor/src/policy_cache.lo
-libraries/libapparmor/src/policy_cache.o
-libraries/libapparmor/src/private.lo
-libraries/libapparmor/src/private.o
-libraries/libapparmor/src/scanner.lo
-libraries/libapparmor/src/scanner.o
-libraries/libapparmor/src/libapparmor.pc
-libraries/libapparmor/src/libapparmor.la
-libraries/libapparmor/src/libimmunix.la
-libraries/libapparmor/src/grammar.c
-libraries/libapparmor/src/grammar.h
-libraries/libapparmor/src/scanner.c
-libraries/libapparmor/src/scanner.h
-libraries/libapparmor/src/test-suite.log
-libraries/libapparmor/src/tst_aalogmisc
-libraries/libapparmor/src/tst_aalogmisc.log
-libraries/libapparmor/src/tst_aalogmisc.o
-libraries/libapparmor/src/tst_aalogmisc.trs
-libraries/libapparmor/src/tst_features
-libraries/libapparmor/src/tst_features.log
-libraries/libapparmor/src/tst_features.o
-libraries/libapparmor/src/tst_features.trs
-libraries/libapparmor/src/tst_kernel
-libraries/libapparmor/src/tst_kernel.log
-libraries/libapparmor/src/tst_kernel.o
-libraries/libapparmor/src/tst_kernel.trs
-libraries/libapparmor/swig/Makefile
-libraries/libapparmor/swig/Makefile.in
-libraries/libapparmor/swig/perl/LibAppArmor.bs
-libraries/libapparmor/swig/perl/LibAppArmor.pm
-libraries/libapparmor/swig/perl/Makefile
-libraries/libapparmor/swig/perl/Makefile.PL
-libraries/libapparmor/swig/perl/Makefile.in
-libraries/libapparmor/swig/perl/Makefile.perl
-libraries/libapparmor/swig/perl/Makefile.perle
-libraries/libapparmor/swig/perl/MYMETA.json
-libraries/libapparmor/swig/perl/MYMETA.yml
-libraries/libapparmor/swig/perl/blib
-libraries/libapparmor/swig/perl/libapparmor_wrap.c
-libraries/libapparmor/swig/perl/libapparmor_wrap.o
-libraries/libapparmor/swig/perl/pm_to_blib
-libraries/libapparmor/swig/python/LibAppArmor.py
-libraries/libapparmor/swig/python/build/
-libraries/libapparmor/swig/python/libapparmor_wrap.c
-libraries/libapparmor/swig/python/Makefile
-libraries/libapparmor/swig/python/Makefile.in
-libraries/libapparmor/swig/python/setup.py
-libraries/libapparmor/swig/python/test/Makefile
-libraries/libapparmor/swig/python/test/Makefile.in
-libraries/libapparmor/swig/python/test/test-suite.log
-libraries/libapparmor/swig/python/test/test_python.py
-libraries/libapparmor/swig/python/test/test_python.py.log
-libraries/libapparmor/swig/python/test/test_python.py.trs
-libraries/libapparmor/swig/ruby/Makefile
-libraries/libapparmor/swig/ruby/Makefile.in
-libraries/libapparmor/testsuite/.deps
-libraries/libapparmor/testsuite/.libs
-libraries/libapparmor/testsuite/Makefile
-libraries/libapparmor/testsuite/Makefile.in
-libraries/libapparmor/testsuite/libaalogparse.log
-libraries/libapparmor/testsuite/libaalogparse.sum
-libraries/libapparmor/testsuite/site.exp
-libraries/libapparmor/testsuite/test_multi.multi
-libraries/libapparmor/testsuite/config/Makefile
-libraries/libapparmor/testsuite/config/Makefile.in
-libraries/libapparmor/testsuite/lib/Makefile
-libraries/libapparmor/testsuite/lib/Makefile.in
-libraries/libapparmor/testsuite/libaalogparse.test/Makefile
-libraries/libapparmor/testsuite/libaalogparse.test/Makefile.in
-libraries/libapparmor/testsuite/test_multi/out
-libraries/libapparmor/testsuite/test_multi_multi-test_multi.o
-changehat/mod_apparmor/.libs
-utils/*.8
-utils/*.8.html
-utils/*.5
-utils/*.5.html
-utils/*.tmp
-utils/po/*.mo
-utils/apparmor/*.pyc
-utils/apparmor/rule/*.pyc
-utils/test/common_test.pyc
-utils/test/.coverage
-utils/test/htmlcov/
-utils/vim/apparmor.vim
-utils/vim/apparmor.vim.5
-utils/vim/apparmor.vim.5.html
-utils/vim/pod2htmd.tmp
-tests/regression/apparmor/access
-tests/regression/apparmor/changehat
-tests/regression/apparmor/changehat_fail
-tests/regression/apparmor/changehat_fork
-tests/regression/apparmor/changehat_misc
-tests/regression/apparmor/changehat_misc2
-tests/regression/apparmor/changehat_pthread
-tests/regression/apparmor/changehat_twice
-tests/regression/apparmor/changehat_wrapper
-tests/regression/apparmor/changeprofile
-tests/regression/apparmor/chdir
-tests/regression/apparmor/chgrp
-tests/regression/apparmor/chmod
-tests/regression/apparmor/chown
-tests/regression/apparmor/clone
-tests/regression/apparmor/deleted
-tests/regression/apparmor/env_check
-tests/regression/apparmor/environ
-tests/regression/apparmor/exec
-tests/regression/apparmor/exec_qual
-tests/regression/apparmor/exec_qual2
-tests/regression/apparmor/fchdir
-tests/regression/apparmor/fchgrp
-tests/regression/apparmor/fchmod
-tests/regression/apparmor/fchown
-tests/regression/apparmor/fork
-tests/regression/apparmor/link
-tests/regression/apparmor/link_subset
-tests/regression/apparmor/mkdir
-tests/regression/apparmor/mmap
-tests/regression/apparmor/mount
-tests/regression/apparmor/named_pipe
-tests/regression/apparmor/net_raw
-tests/regression/apparmor/open
-tests/regression/apparmor/openat
-tests/regression/apparmor/pipe
-tests/regression/apparmor/ptrace
-tests/regression/apparmor/ptrace_helper
-tests/regression/apparmor/pwrite
-tests/regression/apparmor/readdir
-tests/regression/apparmor/rename
-tests/regression/apparmor/rw
-tests/regression/apparmor/swap
-tests/regression/apparmor/symlink
-tests/regression/apparmor/syscall_chroot
-tests/regression/apparmor/syscall_mknod
-tests/regression/apparmor/syscall_mlockall
-tests/regression/apparmor/syscall_ptrace
-tests/regression/apparmor/syscall_reboot
-tests/regression/apparmor/syscall_setdomainname
-tests/regression/apparmor/syscall_sethostname
-tests/regression/apparmor/syscall_setpriority
-tests/regression/apparmor/syscall_setscheduler
-tests/regression/apparmor/syscall_sysctl
-tests/regression/apparmor/sysctl_proc
-tests/regression/apparmor/tcp
-tests/regression/apparmor/unix_fd_client
-tests/regression/apparmor/unix_fd_server
-tests/regression/apparmor/unlink
-tests/regression/apparmor/xattrs
-tests/regression/apparmor/coredump
-**/__pycache__/
-*.orig
--- a/87
+++ b/87
@@ -1,90 +1,51 @@
 #
+# $Id$
 #
-.PHONY: all
-all:
-	@echo "*** See README for information how to build AppArmor ***"
-	exit 1
+OVERRIDE_TARBALL=yes

-COMMONDIR=common
-include ${COMMONDIR}/Make.rules
+include common/Make.rules

-DIRS=libraries/libapparmor \
-     binutils \
-     parser \
+DIRS=parser \
+     profiles \
     utils \
+     changehat/libapparmor \
     changehat/mod_apparmor \
     changehat/pam_apparmor \
-     profiles \
+     management/apparmor-dbus \
+     management/applets/apparmorapplet-gnome \
+     management/yastui \
+     common \
     tests

-# with conversion to git, we don't export from the remote
-REPO_URL?=git@gitlab.com:apparmor/apparmor.git
-REPO_BRANCH?=apparmor-2.13
+REPO_URL=lp:apparmor/2.5
+#REPO_URL="bzr+ssh://bazaar.launchpad.net/~sbeattie/apparmor/apparmor-2.5.1-nominations/"

-COVERITY_DIR=cov-int
 RELEASE_DIR=apparmor-${VERSION}
-__SETUP_DIR?=.
-
-# We create a separate version for tags because git can't handle tags
-# with embedded ~s in them. No spaces around '-' or they'll get
-# embedded in ${VERSION}
-# apparmor version tag format 'vX.Y.ZZ'
-# apparmor branch name format 'apparmor-X.Y'
-TAG_VERSION="v$(subst ~,-,${VERSION})"
-
-# Add exclusion entries arguments for tar here, of the form:
-#   --exclude dir_to_exclude --exclude other_dir
-TAR_EXCLUSIONS=
+SNAPSHOT_DIR=apparmor-${VERSION}-${REPO_VERSION}

 .PHONY: tarball
 tarball: clean
-	REPO_VERSION=`$(value REPO_VERSION_CMD)` && \
-	$(MAKE) export_dir __EXPORT_DIR=${RELEASE_DIR} __REPO_VERSION=$${REPO_VERSION} && \
-	$(MAKE) setup __SETUP_DIR=${RELEASE_DIR} && \
-	tar ${TAR_EXCLUSIONS} -cvzf ${RELEASE_DIR}.tar.gz ${RELEASE_DIR}
+	make export_dir __EXPORT_DIR=${RELEASE_DIR}
+	make setup __SETUP_DIR=${RELEASE_DIR}
+	tar cvzf ${RELEASE_DIR}.tar.gz ${RELEASE_DIR}

 .PHONY: snapshot
 snapshot: clean
-	$(eval REPO_VERSION:=$(shell $(value REPO_VERSION_CMD)))
-	$(eval SNAPSHOT_NAME=apparmor-$(VERSION)~$(shell echo $(REPO_VERSION) | cut -d '-' -f 2-))
-	$(MAKE) export_dir __EXPORT_DIR=${SNAPSHOT_NAME} __REPO_VERSION=${REPO_VERSION} && \
-	$(MAKE) setup __SETUP_DIR=${SNAPSHOT_NAME} && \
-	tar ${TAR_EXCLUSIONS} -cvzf ${SNAPSHOT_NAME}.tar.gz ${SNAPSHOT_NAME}
+	make export_dir __EXPORT_DIR=${SNAPSHOT_DIR}
+	make setup __SETUP_DIR=${SNAPSHOT_DIR}
+	tar cvzf ${SNAPSHOT_DIR}.tar.gz ${SNAPSHOT_DIR}

-.PHONY: coverity
-coverity: snapshot
-	cd $(SNAPSHOT_NAME)/libraries/libapparmor && ./configure --with-python
-	$(foreach dir, $(filter-out utils profiles tests, $(DIRS)), \
-		cov-build --dir $(COVERITY_DIR) -- $(MAKE) -C $(SNAPSHOT_NAME)/$(dir); \
-		mv $(COVERITY_DIR)/build-log.txt $(COVERITY_DIR)/build-log-$(subst /,.,$(dir)).txt ;)
-	$(foreach dir, libraries/libapparmor utils, \
-		cov-build --dir $(COVERITY_DIR) --no-command --fs-capture-search $(SNAPSHOT_NAME)/$(dir); \
-		mv $(COVERITY_DIR)/build-log.txt $(COVERITY_DIR)/build-log-python-$(subst /,.,$(dir)).txt ;)
-	tar -cvzf $(SNAPSHOT_NAME)-$(COVERITY_DIR).tar.gz $(COVERITY_DIR)
+${SNAPSHOT_DIR}:
+	mkdir ${SNAPSHOT_DIR}

 .PHONY: export_dir
 export_dir:
 	mkdir $(__EXPORT_DIR)
-	/usr/bin/git archive --prefix=$(__EXPORT_DIR)/ --format tar $(__REPO_VERSION) | tar xv
-	echo "$(REPO_URL) $(REPO_BRANCH) $(__REPO_VERSION)" > $(__EXPORT_DIR)/common/.stamp_rev
+	/usr/bin/bzr export --per-file-timestamps -r $(REPO_VERSION) $(__EXPORT_DIR) $(REPO_URL)
+	echo "$(REPO_URL) $(REPO_VERSION)" > $(__EXPORT_DIR)/.stamp_rev

-.PHONY: clean
 clean:
-	-rm -rf ${RELEASE_DIR} ./apparmor-${VERSION}~* ${COVERITY_DIR}
-	for dir in $(DIRS); do \
-		$(MAKE) -C $$dir clean; \
-	done
+	-rm -rf ${RELEASE_DIR}

-.PHONY: setup
 setup:
 	cd $(__SETUP_DIR)/libraries/libapparmor && ./autogen.sh
-	# parser has an extra doc to build
-	$(MAKE) -C $(__SETUP_DIR)/parser extra_docs
-	# libraries/libapparmor needs configure to have run before
-	# building docs
-	$(foreach dir, $(filter-out libraries/libapparmor tests, $(DIRS)), \
-		$(MAKE) -C $(__SETUP_DIR)/$(dir) docs;)
-
-.PHONY: tag
-tag:
-	git tag -m 'AppArmor $(VERSION)' -s $(TAG_VERSION)
--- a/README.md
+++ b/README.md
@@ -1,323 +0,0 @@
-# AppArmor
-
-[![Build status](https://gitlab.com/apparmor/apparmor/badges/master/build.svg)](https://gitlab.com/apparmor/apparmor/commits/master)
-[![Overall test coverage](https://gitlab.com/apparmor/apparmor/badges/master/coverage.svg)](https://gitlab.com/apparmor/apparmor/pipelines)
-[![Core Infrastructure Initiative Best Practices](https://bestpractices.coreinfrastructure.org/projects/1699/badge)](https://bestpractices.coreinfrastructure.org/projects/1699)
-
------------
-Introduction
------------
-AppArmor protects systems from insecure or untrusted processes by
-running them in restricted confinement, while still allowing processes
-to share files, exercise privilege and communicate with other processes.
-AppArmor is a Mandatory Access Control (MAC) mechanism which uses the
-Linux Security Module (LSM) framework. The confinement's restrictions
-are mandatory and are not bound to identity, group membership, or object
-ownership. The protections provided are in addition to the kernel's
-regular access control mechanisms (including DAC) and can be used to
-restrict the superuser.
-
-The AppArmor kernel module and accompanying user-space tools are
-available under the GPL license (the exception is the libapparmor
-library, available under the LGPL license, which allows change_hat(2)
-and change_profile(2) to be used by non-GPL binaries).
-
-For more information, you can read the techdoc.pdf (available after
-building the parser) and by visiting the https://apparmor.net/ web
-site.
-
----------------
-Getting in Touch
----------------
-
-Please send all complaints, feature requests, rants about the software,
-and questions to the
-[AppArmor mailing list](https://lists.ubuntu.com/mailman/listinfo/apparmor).
-
-Bug reports can be filed against the AppArmor project on
-[launchpad](https://bugs.launchpad.net/apparmor) or reported to the mailing
-list directly for those who wish not to register for an account on
-launchpad. See the
-[wiki page](https://gitlab.com/apparmor/apparmor/wikis/home#reporting-bugs)
-for more information.
-
-Security issues can be filed as security bugs on launchpad
-or directed to `security@apparmor.net`. Additional details can be found
-in the [wiki](https://gitlab.com/apparmor/apparmor/wikis/home#reporting-security-vulnerabilities).
-
-------------
-Source Layout
-------------
-
-AppArmor consists of several different parts:
-
-```
-binutils/	source for basic utilities written in compiled languages
-changehat/	source for using changehat with Apache, PAM and Tomcat
-common/		common makefile rules
-desktop/	empty
-kernel-patches/	compatibility patches for various kernel versions
-libraries/	libapparmor source and language bindings
-parser/		source for parser/loader and corresponding documentation
-profiles/	configuration files, reference profiles and abstractions
-tests/		regression and stress testsuites
-utils/		high-level utilities for working with AppArmor
-```
-
--------------------------------------
-Important note on AppArmor kernel code
--------------------------------------
-
-While most of the kernel AppArmor code has been accepted in the
-upstream Linux kernel, a few important pieces were not included. These
-missing pieces unfortunately are important bits for AppArmor userspace
-and kernel interaction; therefore we have included compatibility
-patches in the kernel-patches/ subdirectory, versioned by upstream
-kernel (2.6.37 patches should apply cleanly to 2.6.38 source).
-
-Without these patches applied to the kernel, the AppArmor userspace
-will not function correctly.
-
------------------------------------------
-Building and Installing AppArmor Userspace
------------------------------------------
-
-To build and install AppArmor userspace on your system, build and install in
-the following order. Some systems may need to export various python-related
-environment variables to complete the build. For example, before building
-anything on these systems, use something along the lines of:
-
-```
-$ export PYTHONPATH=$(realpath libraries/libapparmor/swig/python)
-$ export PYTHON=/usr/bin/python3
-$ export PYTHON_VERSION=3
-$ export PYTHON_VERSIONS=python3
-```
-
-libapparmor:
-
-```
-$ cd ./libraries/libapparmor
-$ sh ./autogen.sh
-$ sh ./configure --prefix=/usr --with-perl --with-python # see below
-$ make
-$ make check
-$ make install
-```
-
-[an additional optional argument to libapparmor's configure is --with-ruby, to
-generate Ruby bindings to libapparmor.]
-
-
-Binary Utilities:
-
-```
-$ cd binutils
-$ make
-$ make check
-$ make install
-```
-
-parser:
-
-```
-$ cd parser
-$ make		# depends on libapparmor having been built first
-$ make check
-$ make install
-```
-
-
-Utilities:
-
-```
-$ cd utils
-$ make
-$ make check
-$ make install
-```
-
-Apache mod_apparmor:
-
-```
-$ cd changehat/mod_apparmor
-$ make		# depends on libapparmor having been built first
-$ make install
-```
-
-
-PAM AppArmor:
-
-```
-$ cd changehat/pam_apparmor
-$ make		# depends on libapparmor having been built first
-$ make install
-```
-
-
-Profiles:
-
-```
-$ cd profiles
-$ make
-$ make check	# depends on the parser having been built first
-$ make install
-```
-
-[Note that for the parser, binutils, and utils, if you only wish to build/use
- some of the locale languages, you can override the default by passing
- the LANGS arguments to make; e.g. make all install "LANGS=en_US fr".]
-
-------------------
-AppArmor Testsuites
-------------------
-
-A number of testsuites are in the AppArmor sources. Most have documentation on
-usage and how to update and add tests. Below is a quick overview of their
-location and how to run them.
-
-
-Regression tests
----------------
-For details on structure and adding tests, see
-tests/regression/apparmor/README.
-
-To run:
-
-```
-$ cd tests/regression/apparmor (requires root)
-$ make
-$ sudo make tests
-$ sudo bash open.sh -r	 # runs and saves the last testcase from open.sh
-```
-
-Parser tests
------------
-For details on structure and adding tests, see parser/tst/README.
-
-To run:
-
-```
-$ cd parser/tst
-$ make
-$ make tests
-```
-
-Libapparmor
-----------
-For details on structure and adding tests, see libraries/libapparmor/README.
-
-```
-$ cd libraries/libapparmor
-$ make check
-```
-
-Utils
-----
-Tests for the Python utilities exist in the test/ subdirectory.
-
-```
-$ cd utils
-$ make check
-```
-
-The aa-decode utility to be tested can be overridden by
-setting up environment variable APPARMOR_DECODE; e.g.:
-
-```
-$ APPARMOR_DECODE=/usr/bin/aa-decode make check
-```
-
-Profile checks
--------------
-A basic consistency check to ensure that the parser and aa-logprof parse
-successfully the current set of shipped profiles. The system or other
-parser and logprof can be passed in by overriding the PARSER and LOGPROF
-variables.
-
-```
-$ cd profiles
-$ make && make check
-```
-
-Stress Tests
------------
-To run AppArmor stress tests:
-
-```
-$ make all
-```
-
-Use these:
-
-```
-$ ./change_hat
-$ ./child
-$ ./kill.sh
-$ ./open
-$ ./s.sh
-```
-
-Or run all at once:
-
-```
-$ ./stress.sh
-```
-
-Please note that the above will stress the system so much it may end up
-invoking the OOM killer.
-
-To run parser stress tests (requires /usr/bin/ruby):
-
-```
-$ ./stress.sh
-```
-
-(see stress.sh -h for options)
-
-Coverity Support
----------------
-Coverity scans are available to AppArmor developers at
-https://scan.coverity.com/projects/apparmor.
-
-In order to submit a Coverity build for analysis, the cov-build binary
-must be discoverable from your PATH. See the "To Setup" section of
-https://scan.coverity.com/download?tab=cxx to obtain a pre-built copy of
-cov-build.
-
-To generate a compressed tarball of an intermediate Coverity directory:
-
-```
-$ make coverity
-```
-
-The compressed tarball is written to
-apparmor-<SNAPSHOT_VERSION>-cov-int.tar.gz, where <SNAPSHOT_VERSION>
-is something like 2.10.90~3328, and must be uploaded to
-https://scan.coverity.com/projects/apparmor/builds/new for analysis. You must
-include the snapshot version in Coverity's project build submission form, in
-the "Project Version" field, so that it is quickly obvious to all AppArmor
-developers what snapshot of the AppArmor repository was used for the analysis.
-
-----------------------------------------------
-Building and Installing AppArmor Kernel Patches
-----------------------------------------------
-
-TODO
-
-
-----------------
-Required versions
-----------------
-
-The AppArmor userspace utilities are written with some assumptions about
-installed and available versions of other tools. This is a (possibly
-incomplete) list of known version dependencies:
-
-The Python utilities require a minimum of Python 2.7 (deprecated) or Python 3.3.
-Python 3.x is recommended. Python 2.x support is deprecated since AppArmor 2.11.
-
-Some utilities (aa-exec, aa-notify and aa-decode) require Perl 5.10.1 or newer.
-
-Most shell scripts are written for POSIX-compatible sh. aa-decode expects
-bash, probably version 3.2 and higher.
--- a/binutils/Makefile
+++ b/binutils/Makefile
@@ -1,157 +0,0 @@
-# ----------------------------------------------------------------------
-#    Copyright (c) 2015
-#    Canonical Ltd. (All rights reserved)
-#
-#    This program is free software; you can redistribute it and/or
-#    modify it under the terms of version 2 of the GNU General Public
-#    License published by the Free Software Foundation.
-#
-#    This program is distributed in the hope that it will be useful,
-#    but WITHOUT ANY WARRANTY; without even the implied warranty of
-#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#    GNU General Public License for more details.
-# ----------------------------------------------------------------------
-NAME=aa-binutils
-all:
-COMMONDIR=../common/
-
-include $(COMMONDIR)/Make.rules
-
-DESTDIR=/
-BINDIR=${DESTDIR}/usr/bin
-LOCALEDIR=/usr/share/locale
-MANPAGES=aa-enabled.1 aa-exec.1
-
-WARNINGS = -Wall
-EXTRA_WARNINGS = -Wsign-compare -Wmissing-field-initializers -Wformat-security -Wunused-parameter
-CPP_WARNINGS =
-ifndef CFLAGS
-CFLAGS	= -g -O2 -pipe
-
-ifdef DEBUG
-CFLAGS += -pg -D DEBUG
-endif
-ifdef COVERAGE
-CFLAGS = -g -pg -fprofile-arcs -ftest-coverage
-endif
-endif #CFLAGS
-
-EXTRA_CFLAGS = ${CFLAGS} ${CPPFLAGS} ${EXTRA_CXXFLAGS} ${CPP_WARNINGS}
-
-#INCLUDEDIR = /usr/src/linux/include
-INCLUDEDIR =
-
-ifdef INCLUDEDIR
-	CFLAGS += -I$(INCLUDEDIR)
-endif
-
-# Internationalization support. Define a package and a LOCALEDIR
-EXTRA_CFLAGS+=-DPACKAGE=\"${NAME}\" -DLOCALEDIR=\"${LOCALEDIR}\"
-
-SRCS = aa_enabled.c
-HDRS =
-TOOLS = aa-enabled aa-exec
-
-AALIB = -Wl,-Bstatic -lapparmor  -Wl,-Bdynamic -lpthread
-
-ifdef USE_SYSTEM
-  # Using the system libapparmor so Makefile dependencies can't be used
-  LIBAPPARMOR_A =
-  INCLUDE_APPARMOR =
-  APPARMOR_H =
-  LIBAPPARMOR_LDFLAGS =
-else
-  LIBAPPARMOR_SRC = ../libraries/libapparmor/
-  LOCAL_LIBAPPARMOR_INCLUDE = $(LIBAPPARMOR_SRC)/include
-  LOCAL_LIBAPPARMOR_LDPATH = $(LIBAPPARMOR_SRC)/src/.libs
-
-  LIBAPPARMOR_A = $(LOCAL_LIBAPPARMOR_LDPATH)/libapparmor.a
-  INCLUDE_APPARMOR = -I$(LOCAL_LIBAPPARMOR_INCLUDE)
-  APPARMOR_H = $(LOCAL_LIBAPPARMOR_INCLUDE)/sys/apparmor.h
-  LIBAPPARMOR_LDFLAGS = -L$(LOCAL_LIBAPPARMOR_LDPATH)
-endif
-EXTRA_CFLAGS += $(INCLUDE_APPARMOR)
-LDFLAGS += $(LIBAPPARMOR_LDFLAGS)
-
-ifdef V
-  VERBOSE = 1
-endif
-ifndef VERBOSE
-  VERBOSE = 0
-endif
-ifeq ($(VERBOSE),1)
-  BUILD_OUTPUT =
-  Q =
-else
-  BUILD_OUTPUT = > /dev/null 2>&1
-  Q = @
-endif
-export Q VERBOSE BUILD_OUTPUT
-
-po/%.pot: %.c
-	$(MAKE) -C po $(@F) NAME=$* SOURCES=$*.c
-
-# targets arranged this way so that people who don't want full docs can
-# pick specific targets they want.
-arch: 	$(TOOLS)
-
-manpages:	$(MANPAGES)
-
-docs:	manpages
-
-indep: docs
-	$(Q)$(MAKE) -C po all
-
-all:	arch indep
-
-.PHONY: coverage
-coverage:
-	$(MAKE) clean $(TOOLS) COVERAGE=1
-
-ifndef USE_SYSTEM
-$(LIBAPPARMOR_A):
-	@if [ ! -f $@ ]; then \
-		echo "error: $@ is missing. Pick one of these possible solutions:" 1>&2; \
-		echo "  1) Build against the in-tree libapparmor by building it first and then trying again. See the top-level README for help." 1>&2; \
-		echo "  2) Build against the system libapparmor by adding USE_SYSTEM=1 to your make command." 1>&2;\
-		exit 1; \
-	fi
-endif
-
-aa-enabled: aa_enabled.c $(LIBAPPARMOR_A)
-	$(CC) $(LDFLAGS) $(EXTRA_CFLAGS) -o $@ $< $(LIBS) $(AALIB) 
-
-aa-exec: aa_exec.c $(LIBAPPARMOR_A)
-	$(CC) $(LDFLAGS) $(EXTRA_CFLAGS) -o $@ $< $(LIBS) $(AALIB)
-
-.SILENT: check
-.PHONY: check
-check: check_pod_files tests
-
-.SILENT: tests
-tests: $(TOOLS) $(TESTS)
-	echo "no tests atm"
-
-.PHONY: install
-install: install-indep install-arch
-
-.PHONY: install-arch
-install-arch: arch
-	install -m 755 -d ${BINDIR}
-	install -m 755 ${TOOLS} ${BINDIR}
-
-.PHONY: install-indep
-install-indep: indep
-	$(MAKE) -C po install NAME=${NAME} DESTDIR=${DESTDIR}
-	$(MAKE) install_manpages DESTDIR=${DESTDIR}
-
-ifndef VERBOSE
-.SILENT: clean
-endif
-.PHONY: clean
-clean: pod_clean
-	rm -f core core.* *.o *.s *.a *~ *.gcda *.gcno
-	rm -f gmon.out
-	rm -f $(TOOLS) $(TESTS)
-	$(MAKE) -s -C po clean
-
--- a/binutils/aa-enabled.pod
+++ b/binutils/aa-enabled.pod
@@ -1,94 +0,0 @@
-# This publication is intellectual property of Canonical Ltd. Its contents
-# can be duplicated, either in part or in whole, provided that a copyright
-# label is visibly located on each copy.
-#
-# All information found in this book has been compiled with utmost
-# attention to detail. However, this does not guarantee complete accuracy.
-# Neither Canonical Ltd, the authors, nor the translators shall be held
-# liable for possible errors or the consequences thereof.
-#
-# Many of the software and hardware descriptions cited in this book
-# are registered trademarks. All trade names are subject to copyright
-# restrictions and may be registered trade marks. Canonical Ltd
-# essentially adheres to the manufacturer's spelling.
-#
-# Names of products and trademarks appearing in this book (with or without
-# specific notation) are likewise subject to trademark and trade protection
-# laws and may thus fall under copyright restrictions.
-#
-
-
-=pod
-
-=head1 NAME
-
-aa-enabled - test whether AppArmor is enabled
-
-=head1 SYNOPSIS
-
-B<aa-enabled> [options]
-
-=head1 DESCRIPTION
-
-B<aa-enabled> is used to determine if AppArmor is enabled.
-
-=head1 OPTIONS
-
-B<aa-enabled> accepts the following arguments:
-
-=over 4
-
-=item -h, --help
-
-Display a brief usage guide.
-
-=item -q, --quiet
-
-Do not output anything to stdout. This option is intended to be used by
-scripts that simply want to use the exit code to determine if AppArmor is
-enabled.
-
-=back
-
-=head1 EXIT STATUS
-
-Upon exiting, B<aa-enabled> will set its exit status to the following values:
-
-=over 4
-
-=item B<0>
-
-if AppArmor is enabled.
-
-=item B<1>
-
-if AppArmor is not enabled/loaded.
-
-=item B<2>
-
-intentionally not used as an B<aa-enabled> exit status.
-
-=item B<3>
-
-if the AppArmor control files aren't available under /sys/kernel/security/.
-
-=item B<4>
-
-if B<aa-enabled> doesn't have enough privileges to read the apparmor control files.
-
-=item B<64>
-
-if any unexpected error or condition is encountered.
-
-=back
-
-=head1 BUGS
-
-If you find any bugs, please report them at
-L<https://bugs.launchpad.net/apparmor/+filebug>.
-
-=head1 SEE ALSO
-
-apparmor(7), apparmor.d(5), aa_is_enabled(2), and L<https://wiki.apparmor.net>.
-
-=cut
--- a/binutils/aa-exec.pod
+++ b/binutils/aa-exec.pod
@@ -1,93 +0,0 @@
-# This publication is intellectual property of Canonical Ltd. Its contents
-# can be duplicated, either in part or in whole, provided that a copyright
-# label is visibly located on each copy.
-#
-# All information found in this book has been compiled with utmost
-# attention to detail. However, this does not guarantee complete accuracy.
-# Neither Canonical Ltd, the authors, nor the translators shall be held
-# liable for possible errors or the consequences thereof.
-#
-# Many of the software and hardware descriptions cited in this book
-# are registered trademarks. All trade names are subject to copyright
-# restrictions and may be registered trade marks. Canonical Ltd
-# essentially adheres to the manufacturer's spelling.
-#
-# Names of products and trademarks appearing in this book (with or without
-# specific notation) are likewise subject to trademark and trade protection
-# laws and may thus fall under copyright restrictions.
-#
-
-
-=pod
-
-=head1 NAME
-
-aa-exec - confine a program with the specified AppArmor profile
-
-=head1 SYNOPSIS
-
-B<aa-exec> [options] [--] [I<E<lt>commandE<gt>> ...]
-
-=head1 DESCRIPTION
-
-B<aa-exec> is used to launch a program confined by the specified profile
-and or namespace.  If both a profile and namespace are specified command
-will be confined by profile in the new policy namespace.  If only a namespace
-is specified, the profile name of the current confinement will be used.  If
-neither a profile or namespace is specified command will be run using
-standard profile attachment (ie. as if run without the aa-exec command).
-
-If the arguments are to be pasted to the I<E<lt>commandE<gt>> being invoked
-by aa-exec then -- should be used to separate aa-exec arguments from the
-command.
-  aa-exec -p profile1 -- ls -l
-
-=head1 OPTIONS
-B<aa-exec> accepts the following arguments:
-
-=over 4
-
-=item -p PROFILE, --profile=PROFILE
-
-confine I<E<lt>commandE<gt>> with PROFILE. If the PROFILE is not specified
-use the current profile name (likely unconfined).
-
-=item -n NAMESPACE, --namespace=NAMESPACE
-
-use profiles in NAMESPACE.  This will result in confinement transitioning
-to using the new profile namespace.
-
-=item -i, --immediate
-
-transition to PROFILE before doing executing I<E<lt>commandE<gt>>.  This
-subjects the running of I<E<lt>commandE<gt>> to the exec transition rules
-of the current profile.
-
-=item -v, --verbose
-
-show commands being performed
-
-=item -d, --debug
-
-show commands and error codes
-
-=item --
-
-Signal the end of options and disables further option processing. Any
-arguments after the -- are treated as arguments of the command.  This is
-useful when passing arguments to the I<E<lt>commandE<gt>> being invoked by
-aa-exec.
-
-=back
-
-=head1 BUGS
-
-If you find any bugs, please report them at
-L<https://bugs.launchpad.net/apparmor/+filebug>.
-
-=head1 SEE ALSO
-
-aa-stack(8), aa-namespace(8), apparmor(7), apparmor.d(5), aa_change_profile(3),
-aa_change_onexec(3) and L<https://wiki.apparmor.net>.
-
-=cut
--- a/binutils/aa_enabled.c
+++ b/binutils/aa_enabled.c
@@ -1,92 +0,0 @@
-/*
- *   Copyright (C) 2015 Canonical Ltd.
- *
- *   This program is free software; you can redistribute it and/or
- *    modify it under the terms of version 2 of the GNU General Public
- *   License published by the Free Software Foundation.
- */
-
-#include <errno.h>
-#include <locale.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <libintl.h>
-#define _(s) gettext(s)
-
-#include <sys/apparmor.h>
-
-void print_help(const char *command)
-{
-	printf(_("%s: [options]\n"
-		 "  options:\n"
-		 "  -q | --quiet        Don't print out any messages\n"
-		 "  -h | --help         Print help\n"),
-	       command);
-	exit(1);
-}
-
-
-/* Exit statuses and meanings are documented in the aa-enabled.pod file */
-static void exit_with_error(int saved_errno, int quiet)
-{
-	int err;
-
-	switch(saved_errno) {
-	case ENOSYS:
-		if (!quiet)
-			printf(_("No - not available on this system.\n"));
-		exit(1);
-	case ECANCELED:
-		if (!quiet)
-			printf(_("No - disabled at boot.\n"));
-		exit(1);
-	case ENOENT:
-		if (!quiet)
-			printf(_("Maybe - policy interface not available.\n"));
-		exit(3);
-	case EPERM:
-	case EACCES:
-		if (!quiet)
-			printf(_("Maybe - insufficient permissions to determine availability.\n"));
-		exit(4);
-	}
-
-	if (!quiet)
-		printf(_("Error - %s\n"), strerror(saved_errno));
-	exit(64);
-}
-
-int main(int argc, char **argv)
-{
-	int enabled;
-	int quiet = 0;
-
-	setlocale(LC_MESSAGES, "");
-	bindtextdomain(PACKAGE, LOCALEDIR);
-	textdomain(PACKAGE);
-
-	if (argc > 2) {
-		printf(_("unknown or incompatible options\n"));
-		print_help(argv[0]);
-	} else if (argc == 2) {
-		if (strcmp(argv[1], "--quiet") == 0 ||
-		    strcmp(argv[1], "-q") == 0) {
-			quiet = 1;
-		} else if (strcmp(argv[1], "--help") == 0 ||
-			   strcmp(argv[1], "-h") == 0) {
-			print_help(argv[0]);
-		} else {
-			printf(_("unknown option '%s'\n"), argv[1]);
-			print_help(argv[0]);
-		}
-	}
-
-	enabled = aa_is_enabled();
-	if (!enabled)
-		exit_with_error(errno, quiet);
-
-	if (!quiet)
-		printf(_("Yes\n"));
-	exit(0);
-}
--- a/binutils/aa_exec.c
+++ b/binutils/aa_exec.c
@@ -1,218 +0,0 @@
-/*
- *   Copyright (c) 2015
- *   Canonical, Ltd. (All rights reserved)
- *
- *   This program is free software; you can redistribute it and/or
- *   modify it under the terms of version 2 of the GNU General Public
- *   License published by the Free Software Foundation.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, contact Novell, Inc. or Canonical
- *   Ltd.
- */
-
-#include <errno.h>
-#include <getopt.h>
-#include <libintl.h>
-#include <limits.h>
-#include <stdio.h>
-#include <stdarg.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/apparmor.h>
-#include <unistd.h>
-#define _(s) gettext(s)
-
-static const char *opt_profile = NULL;
-static const char *opt_namespace = NULL;
-static bool opt_debug = false;
-static bool opt_immediate = false;
-static bool opt_verbose = false;
-
-static void usage(const char *name, bool error)
-{
-	FILE *stream = stdout;
-	int status = EXIT_SUCCESS;
-
-	if (error) {
-		stream = stderr;
-		status = EXIT_FAILURE;
-	}
-
-	fprintf(stream,
-		_("USAGE: %s [OPTIONS] <prog> <args>\n"
-		"\n"
-		"Confine <prog> with the specified PROFILE.\n"
-		"\n"
-		"OPTIONS:\n"
-		"  -p PROFILE, --profile=PROFILE		PROFILE to confine <prog> with\n"
-		"  -n NAMESPACE, --namespace=NAMESPACE	NAMESPACE to confine <prog> in\n"
-		"  -d, --debug				show messages with debugging information\n"
-		"  -i, --immediate			change profile immediately instead of at exec\n"
-		"  -v, --verbose				show messages with stats\n"
-		"  -h, --help				display this help\n"
-		"\n"), name);
-	exit(status);
-}
-
-#define error(fmt, args...) _error(_("aa-exec: ERROR: " fmt "\n"), ## args)
-static void _error(const char *fmt, ...)
-{
-	va_list args;
-
-	va_start(args, fmt);
-	vfprintf(stderr, fmt, args);
-	va_end(args);
-	exit(EXIT_FAILURE);
-}
-
-#define debug(fmt, args...) _debug(_("aa-exec: DEBUG: " fmt "\n"), ## args)
-static void _debug(const char *fmt, ...)
-{
-	va_list args;
-
-	if (!opt_debug)
-		return;
-
-	va_start(args, fmt);
-	vfprintf(stderr, fmt, args);
-	va_end(args);
-}
-
-#define verbose(fmt, args...) _verbose(_(fmt "\n"), ## args)
-static void _verbose(const char *fmt, ...)
-{
-	va_list args;
-
-	if (!opt_verbose)
-		return;
-
-	va_start(args, fmt);
-	vfprintf(stderr, fmt, args);
-	va_end(args);
-}
-
-static void verbose_print_argv(char **argv)
-{
-	if (!opt_verbose)
-		return;
-
-	fprintf(stderr, _("exec"));
-	for (; *argv; argv++)
-		fprintf(stderr, " %s", *argv);
-	fprintf(stderr, "\n");
-}
-
-static char **parse_args(int argc, char **argv)
-{
-	int opt;
-	struct option long_opts[] = {
-		{"debug", no_argument, 0, 'd'},
-		{"help", no_argument, 0, 'h'},
-		{"profile", required_argument, 0, 'p'},
-		{"namespace", required_argument, 0, 'n'},
-		{"immediate", no_argument, 0, 'i'},
-		{"verbose", no_argument, 0, 'v'},
-	};
-
-	while ((opt = getopt_long(argc, argv, "+dhp:n:iv", long_opts, NULL)) != -1) {
-		switch (opt) {
-		case 'd':
-			opt_debug = true;
-			break;
-		case 'h':
-			usage(argv[0], false);
-			break;
-		case 'p':
-			opt_profile = optarg;
-			break;
-		case 'n':
-			opt_namespace = optarg;
-			break;
-		case 'i':
-			opt_immediate = true;
-			break;
-		case 'v':
-			opt_verbose = true;
-			break;
-		default:
-			usage(argv[0], true);
-			break;
-		}
-	}
-
-	if (optind >= argc)
-		usage(argv[0], true);
-
-	return argv + optind;
-}
-
-static void build_name(char *name, size_t name_len,
-		       const char *namespace, const char *profile)
-{
-	size_t required_len = 1; /* reserve 1 byte for NUL-terminator */
-
-	if (namespace)
-		required_len += 1 + strlen(namespace) + 3; /* :<NAMESPACE>:// */
-
-	if (profile)
-		required_len += strlen(profile);
-
-	if (required_len > name_len)
-		error("name too long (%zu > %zu)", required_len, name_len);
-
-	name[0] = '\0';
-
-	if (namespace) {
-		strcat(name, ":");
-		strcat(name, namespace);
-		strcat(name, "://");
-	}
-
-	if (profile)
-		strcat(name, profile);
-}
-
-int main(int argc, char **argv)
-{
-	char name[PATH_MAX];
-	int rc = 0;
-
-	argv = parse_args(argc, argv);
-
-	if (opt_namespace || opt_profile)
-		build_name(name, sizeof(name), opt_namespace, opt_profile);
-	else
-		goto exec;
-
-	if (opt_immediate) {
-		verbose("aa_change_profile(\"%s\")", name);
-		rc = aa_change_profile(name);
-		debug("%d = aa_change_profile(\"%s\")", rc, name);
-	} else {
-		verbose("aa_change_onexec(\"%s\")", name);
-		rc = aa_change_onexec(name);
-		debug("%d = aa_change_onexec(\"%s\")", rc, name);
-	}
-
-	if (rc) {
-		if (errno == ENOENT || errno == EACCES) {
-			error("%s '%s' does not exist\n",
-			      opt_profile ? "profile" : "namespace", name);
-		} else if (errno == EINVAL) {
-			error("AppArmor interface not available");
-		} else {
-			error("%m");
-		}
-	}
-
-exec:
-	verbose_print_argv(argv);
-	execvp(argv[0], argv);
-	error("Failed to execute \"%s\": %m", argv[0]);
-}
--- a/binutils/po/Makefile
+++ b/binutils/po/Makefile
@@ -1,19 +0,0 @@
-# ----------------------------------------------------------------------
-#    Copyright (C) 2015 Canonical Ltd.
-#
-#    This program is free software; you can redistribute it and/or
-#    modify it under the terms of version 2 of the GNU General Public
-#    License published by the Free Software Foundation.
-# ----------------------------------------------------------------------
-all:
-
-# As translations get added, they will automatically be included, unless
-# the lang is explicitly added to DISABLED_LANGS; e.g. DISABLED_LANGS=en es
-
-DISABLED_LANGS=
-
-COMMONDIR=../../common
-include $(COMMONDIR)/Make-po.rules
-
-XGETTEXT_ARGS+=--language=C --keyword=_ $(shell if [ -f ${NAME}.pot ] ; then echo -n -j ; fi)
-
--- a/binutils/po/aa-enabled.pot
+++ b/binutils/po/aa-enabled.pot
@@ -1,66 +0,0 @@
-# Copyright (C) 2015 Canonical Ltd
-# This file is distributed under the same license as the AppArmor package.
-# John Johansen <john.johansen@canonical.com>, 2015.
-#
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: apparmor@lists.ubuntu.com\n"
-"POT-Creation-Date: 2015-11-28 10:23-0800\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=CHARSET\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../aa_enabled.c:26
-#, c-format
-msgid ""
-"%s: [options]\n"
-"  options:\n"
-"  -q | --quiet        Don't print out any messages\n"
-"  -h | --help         Print help\n"
-msgstr ""
-
-#: ../aa_enabled.c:45
-#, c-format
-msgid "unknown or incompatible options\n"
-msgstr ""
-
-#: ../aa_enabled.c:55
-#, c-format
-msgid "unknown option '%s'\n"
-msgstr ""
-
-#: ../aa_enabled.c:64
-#, c-format
-msgid "Yes\n"
-msgstr ""
-
-#: ../aa_enabled.c:71
-#, c-format
-msgid "No - not available on this system.\n"
-msgstr ""
-
-#: ../aa_enabled.c:74
-#, c-format
-msgid "No - disabled at boot.\n"
-msgstr ""
-
-#: ../aa_enabled.c:77
-#, c-format
-msgid "Maybe - policy interface not available.\n"
-msgstr ""
-
-#: ../aa_enabled.c:81
-#, c-format
-msgid "Maybe - insufficient permissions to determine availability.\n"
-msgstr ""
-
-#: ../aa_enabled.c:84
-#, c-format
-msgid "Error - '%s'\n"
-msgstr ""
--- a/binutils/po/de.po
+++ b/binutils/po/de.po
@@ -1,73 +0,0 @@
-# German translation for apparmor
-# Copyright (c) 2016 Rosetta Contributors and Canonical Ltd 2016
-# This file is distributed under the same license as the apparmor package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, 2016.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: apparmor\n"
-"Report-Msgid-Bugs-To: AppArmor list <apparmor@lists.ubuntu.com>\n"
-"POT-Creation-Date: 2015-11-28 10:23-0800\n"
-"PO-Revision-Date: 2018-02-09 23:55+0000\n"
-"Last-Translator: Tobias Bannert <tobannert@gmail.com>\n"
-"Language-Team: German <de@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Launchpad-Export-Date: 2018-02-11 05:14+0000\n"
-"X-Generator: Launchpad (build 18544)\n"
-"Language: de\n"
-
-#: ../aa_enabled.c:26
-#, c-format
-msgid ""
-"%s: [options]\n"
-"  options:\n"
-"  -q | --quiet        Don't print out any messages\n"
-"  -h | --help         Print help\n"
-msgstr ""
-"%s: [Optionen]\n"
-"  Optionen:\n"
-"  -q | --quiet        Keine Nachrichten anzeigen\n"
-"  -h | --help         Hilfetext anzeigen\n"
-
-#: ../aa_enabled.c:45
-#, c-format
-msgid "unknown or incompatible options\n"
-msgstr "unbekannte oder nicht kompatible Optionen\n"
-
-#: ../aa_enabled.c:55
-#, c-format
-msgid "unknown option '%s'\n"
-msgstr "unbekannte Option »%s«\n"
-
-#: ../aa_enabled.c:64
-#, c-format
-msgid "Yes\n"
-msgstr "Ja\n"
-
-#: ../aa_enabled.c:71
-#, c-format
-msgid "No - not available on this system.\n"
-msgstr "Nein – auf diesem System nicht verfügbar.\n"
-
-#: ../aa_enabled.c:74
-#, c-format
-msgid "No - disabled at boot.\n"
-msgstr "Nein – beim Start deaktiviert.\n"
-
-#: ../aa_enabled.c:77
-#, c-format
-msgid "Maybe - policy interface not available.\n"
-msgstr "Vielleicht – Richtlinienschnittstelle nicht verfügbar.\n"
-
-#: ../aa_enabled.c:81
-#, c-format
-msgid "Maybe - insufficient permissions to determine availability.\n"
-msgstr ""
-"Vielleicht – ungenügende Berechtigungen, um die Verfügbarkeit zu prüfen\n"
-
-#: ../aa_enabled.c:84
-#, c-format
-msgid "Error - '%s'\n"
-msgstr "Fehler – »%s«\n"
--- a/binutils/po/en_GB.po
+++ b/binutils/po/en_GB.po
@@ -1,72 +0,0 @@
-# English (United Kingdom) translation for apparmor
-# Copyright (c) 2016 Rosetta Contributors and Canonical Ltd 2016
-# This file is distributed under the same license as the apparmor package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, 2016.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: apparmor\n"
-"Report-Msgid-Bugs-To: AppArmor list <apparmor@lists.ubuntu.com>\n"
-"POT-Creation-Date: 2015-11-28 10:23-0800\n"
-"PO-Revision-Date: 2016-02-18 06:22+0000\n"
-"Last-Translator: Andi Chandler <Unknown>\n"
-"Language-Team: English (United Kingdom) <en_GB@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Launchpad-Export-Date: 2016-06-01 05:15+0000\n"
-"X-Generator: Launchpad (build 18053)\n"
-"Language: en_GB\n"
-
-#: ../aa_enabled.c:26
-#, c-format
-msgid ""
-"%s: [options]\n"
-"  options:\n"
-"  -q | --quiet        Don't print out any messages\n"
-"  -h | --help         Print help\n"
-msgstr ""
-"%s: [options]\n"
-"  options:\n"
-"  -q | --quiet        Don't print out any messages\n"
-"  -h | --help         Print help\n"
-
-#: ../aa_enabled.c:45
-#, c-format
-msgid "unknown or incompatible options\n"
-msgstr "unknown or incompatible options\n"
-
-#: ../aa_enabled.c:55
-#, c-format
-msgid "unknown option '%s'\n"
-msgstr "unknown option '%s'\n"
-
-#: ../aa_enabled.c:64
-#, c-format
-msgid "Yes\n"
-msgstr "Yes\n"
-
-#: ../aa_enabled.c:71
-#, c-format
-msgid "No - not available on this system.\n"
-msgstr "No - not available on this system.\n"
-
-#: ../aa_enabled.c:74
-#, c-format
-msgid "No - disabled at boot.\n"
-msgstr "No - disabled at boot.\n"
-
-#: ../aa_enabled.c:77
-#, c-format
-msgid "Maybe - policy interface not available.\n"
-msgstr "Maybe - policy interface not available.\n"
-
-#: ../aa_enabled.c:81
-#, c-format
-msgid "Maybe - insufficient permissions to determine availability.\n"
-msgstr "Maybe - insufficient permissions to determine availability.\n"
-
-#: ../aa_enabled.c:84
-#, c-format
-msgid "Error - '%s'\n"
-msgstr "Error - '%s'\n"
--- a/binutils/po/id.po
+++ b/binutils/po/id.po
@@ -1,72 +0,0 @@
-# Indonesian translation for apparmor
-# Copyright (c) 2016 Rosetta Contributors and Canonical Ltd 2016
-# This file is distributed under the same license as the apparmor package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, 2016.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: apparmor\n"
-"Report-Msgid-Bugs-To: AppArmor list <apparmor@lists.ubuntu.com>\n"
-"POT-Creation-Date: 2015-11-28 10:23-0800\n"
-"PO-Revision-Date: 2016-01-20 08:59+0000\n"
-"Last-Translator: Ari Setyo Wibowo <mr.a.contact@gmail.com>\n"
-"Language-Team: Indonesian <id@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Launchpad-Export-Date: 2016-06-01 05:15+0000\n"
-"X-Generator: Launchpad (build 18053)\n"
-"Language: id\n"
-
-#: ../aa_enabled.c:26
-#, c-format
-msgid ""
-"%s: [options]\n"
-"  options:\n"
-"  -q | --quiet        Don't print out any messages\n"
-"  -h | --help         Print help\n"
-msgstr ""
-"%s: [options]\n"
-"  pilihan:\n"
-"  -q | --quiet       Jangan tampilkan pesan apapun\n"
-"  -h | --help         Tampilkan bantuan\n"
-
-#: ../aa_enabled.c:45
-#, c-format
-msgid "unknown or incompatible options\n"
-msgstr "pilihan yang tidak dikenali atau tidak kompatibel\n"
-
-#: ../aa_enabled.c:55
-#, c-format
-msgid "unknown option '%s'\n"
-msgstr "pilihan tidak dikenali '%s'\n"
-
-#: ../aa_enabled.c:64
-#, c-format
-msgid "Yes\n"
-msgstr "Ya\n"
-
-#: ../aa_enabled.c:71
-#, c-format
-msgid "No - not available on this system.\n"
-msgstr "Tidak - tidak tersedia di sistem ini.\n"
-
-#: ../aa_enabled.c:74
-#, c-format
-msgid "No - disabled at boot.\n"
-msgstr "Tidak - nonaktifkan saat boot.\n"
-
-#: ../aa_enabled.c:77
-#, c-format
-msgid "Maybe - policy interface not available.\n"
-msgstr "Mungkin - kebijakan antarmuka tidak tersedia.\n"
-
-#: ../aa_enabled.c:81
-#, c-format
-msgid "Maybe - insufficient permissions to determine availability.\n"
-msgstr "Mungkin - izin tidak memadai untuk menentukan ketersediaan.\n"
-
-#: ../aa_enabled.c:84
-#, c-format
-msgid "Error - '%s'\n"
-msgstr "Kesalahan - '%s'\n"
--- a/binutils/po/pt.po
+++ b/binutils/po/pt.po
@@ -1,72 +0,0 @@
-# Portuguese translation for apparmor
-# Copyright (c) 2016 Rosetta Contributors and Canonical Ltd 2016
-# This file is distributed under the same license as the apparmor package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, 2016.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: apparmor\n"
-"Report-Msgid-Bugs-To: AppArmor list <apparmor@lists.ubuntu.com>\n"
-"POT-Creation-Date: 2015-11-28 10:23-0800\n"
-"PO-Revision-Date: 2016-03-03 08:34+0000\n"
-"Last-Translator: Ivo Xavier <ivoxavier.8@gmail.com>\n"
-"Language-Team: Portuguese <pt@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Launchpad-Export-Date: 2016-06-01 05:15+0000\n"
-"X-Generator: Launchpad (build 18053)\n"
-"Language: pt\n"
-
-#: ../aa_enabled.c:26
-#, c-format
-msgid ""
-"%s: [options]\n"
-"  options:\n"
-"  -q | --quiet        Don't print out any messages\n"
-"  -h | --help         Print help\n"
-msgstr ""
-"%s: [opções]\n"
-"  opções:\n"
-"  -q | --silencioso        Não mostrar mensagens\n"
-"  -h | --ajuda         Mostar ajuda\n"
-
-#: ../aa_enabled.c:45
-#, c-format
-msgid "unknown or incompatible options\n"
-msgstr "opções desconhecidas ou incompatíveis\n"
-
-#: ../aa_enabled.c:55
-#, c-format
-msgid "unknown option '%s'\n"
-msgstr "opção desconhecida '%s'\n"
-
-#: ../aa_enabled.c:64
-#, c-format
-msgid "Yes\n"
-msgstr "Sim\n"
-
-#: ../aa_enabled.c:71
-#, c-format
-msgid "No - not available on this system.\n"
-msgstr "Não - não disponível neste sistema.\n"
-
-#: ../aa_enabled.c:74
-#, c-format
-msgid "No - disabled at boot.\n"
-msgstr "Não - desligado ao iniciar.\n"
-
-#: ../aa_enabled.c:77
-#, c-format
-msgid "Maybe - policy interface not available.\n"
-msgstr "Talvez - política de interface não disponível.\n"
-
-#: ../aa_enabled.c:81
-#, c-format
-msgid "Maybe - insufficient permissions to determine availability.\n"
-msgstr "Talvez - permissões insuficientes para determinar disponibilidade.\n"
-
-#: ../aa_enabled.c:84
-#, c-format
-msgid "Error - '%s'\n"
-msgstr "Erro - '%s'\n"
--- a/binutils/po/ru.po
+++ b/binutils/po/ru.po
@@ -1,72 +0,0 @@
-# Russian translation for apparmor
-# Copyright (c) 2016 Rosetta Contributors and Canonical Ltd 2016
-# This file is distributed under the same license as the apparmor package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, 2016.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: apparmor\n"
-"Report-Msgid-Bugs-To: AppArmor list <apparmor@lists.ubuntu.com>\n"
-"POT-Creation-Date: 2015-11-28 10:23-0800\n"
-"PO-Revision-Date: 2016-03-29 14:46+0000\n"
-"Last-Translator: Eugene Marshal <Unknown>\n"
-"Language-Team: Russian <ru@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Launchpad-Export-Date: 2016-06-01 05:15+0000\n"
-"X-Generator: Launchpad (build 18053)\n"
-"Language: ru\n"
-
-#: ../aa_enabled.c:26
-#, c-format
-msgid ""
-"%s: [options]\n"
-"  options:\n"
-"  -q | --quiet        Don't print out any messages\n"
-"  -h | --help         Print help\n"
-msgstr ""
-"%s: [параметры]\n"
-"  параметры:\n"
-"  -q | --quiet        не выводить никакие сообщения\n"
-"  -h | --help          вывести справку\n"
-
-#: ../aa_enabled.c:45
-#, c-format
-msgid "unknown or incompatible options\n"
-msgstr "неизвестные или несовместимые параметры\n"
-
-#: ../aa_enabled.c:55
-#, c-format
-msgid "unknown option '%s'\n"
-msgstr "неизвестный параметр '%s'\n"
-
-#: ../aa_enabled.c:64
-#, c-format
-msgid "Yes\n"
-msgstr "Да\n"
-
-#: ../aa_enabled.c:71
-#, c-format
-msgid "No - not available on this system.\n"
-msgstr "Нет - недоступно на этой системе.\n"
-
-#: ../aa_enabled.c:74
-#, c-format
-msgid "No - disabled at boot.\n"
-msgstr "Нет - выключено при загрузке.\n"
-
-#: ../aa_enabled.c:77
-#, c-format
-msgid "Maybe - policy interface not available.\n"
-msgstr "Возможно - интерфейс политики недоступен.\n"
-
-#: ../aa_enabled.c:81
-#, c-format
-msgid "Maybe - insufficient permissions to determine availability.\n"
-msgstr "Возможно - недостаточно разрешений для определения доступности.\n"
-
-#: ../aa_enabled.c:84
-#, c-format
-msgid "Error - '%s'\n"
-msgstr "Ошибка - '%s'\n"
--- a/changehat/mod_apparmor/Makefile
+++ b/changehat/mod_apparmor/Makefile
@@ -1,6 +1,6 @@
+#	$Id$
 # ----------------------------------------------------------------------
 #    Copyright (c) 2004, 2005 NOVELL (All rights reserved)
-#    Copyright (c) 2016 Canonical, Ltd.
 #
 #    This program is free software; you can redistribute it and/or
 #    modify it under the terms of version 2 of the GNU General Public
@@ -18,7 +18,13 @@ NAME:=apache2-mod_apparmor
 all:
 COMMONDIR=../../common/

-include $(COMMONDIR)/Make.rules
+include common/Make.rules
+
+COMMONDIR_EXISTS=$(strip $(shell [ -d ${COMMONDIR} ] && echo true))
+ifeq ($(COMMONDIR_EXISTS), true)
+common/Make.rules: $(COMMONDIR)/Make.rules
+	ln -sf $(COMMONDIR) .
+endif

 TARGET:=mod_apparmor.so
 MANPAGES=mod_apparmor.8
@@ -36,63 +42,25 @@ APXS:=$(shell if [ -x "/usr/sbin/apxs2" ] ; then \
 	      fi ) 
 APXS_INSTALL_DIR=$(shell ${APXS} -q LIBEXECDIR)
 DESTDIR=
-ifdef USE_SYSTEM
-  LIBAPPARMOR = $(shell if pkg-config --exists libapparmor ; then \
-                                pkg-config --silence-errors --libs libapparmor ; \
-                        elif ldconfig -p | grep -q libapparmor\.so$$ ; then \
-                                echo -lapparmor ; \
-                        fi )
-  ifeq ($(strip $(LIBAPPARMOR)),)
-    ERROR_MESSAGE = $(error ${nl}\
-************************************************************************${nl}\
-Unable to find libapparmor installed on this system; either${nl}\
-install libapparmor devel packages, set the LIBAPPARMOR variable${nl}\
-manually, or build against in-tree libapparmor.${nl}\
-************************************************************************${nl})
-  endif # LIBAPPARMOR not set
-  LDLIBS += $(LIBAPPARMOR)
-else
-  LIBAPPARMOR_SRC := ../../libraries/libapparmor/
-  LIBAPPARMOR_INCLUDE = $(LIBAPPARMOR_SRC)/include
-  LIBAPPARMOR_PATH := $(LIBAPPARMOR_SRC)/src/.libs/
-    ifeq ($(realpath $(LIBAPPARMOR_PATH)/libapparmor.a),)
-        ERROR_MESSAGE = $(error ${nl}\
-************************************************************************${nl}\
-$(LIBAPPARMOR_PATH)/libapparmor.a is missing; either build against${nl}\
-the in-tree libapparmor by building it first and then trying again${nl}\
-(see the top-level README for help) or build against the system${nl}\
-libapparmor by adding USE_SYSTEM=1 to your make command.${nl}\
-************************************************************************${nl})
-    endif
-  # Need to pass -Wl twice here to get past both apxs2 and libtool, as
-  # libtool will add the path to the RPATH of the library if passed -L/some/path
-  LIBAPPARMOR_FLAGS = -I$(LIBAPPARMOR_INCLUDE) -Wl,-Wl,-L$(LIBAPPARMOR_PATH)
-  LDLIBS = -lapparmor
-endif
+LIBAPPARMOR_FLAGS=$(shell if [ -f /usr/lib/libapparmor.so -o -f /usr/lib64/libapparmor.so ] ; then \
+				echo -lapparmor ; \
+			  else \
+			  	echo -DUSE_COMPAT_IMMUNIX_H -limmunix ;\
+			  fi)

-.PHONY: libapparmor_check
-.SILENT: libapparmor_check
-libapparmor_check: ; $(ERROR_MESSAGE)
-
-all: libapparmor_check $(TARGET) docs
-
-.PHONY: docs
-docs: ${MANPAGES} ${HTMLMANPAGES}
+all: $(TARGET) ${MANPAGES} ${HTMLMANPAGES}

 %.so: %.c
-	${APXS} ${LIBAPPARMOR_FLAGS} -c $< ${LDLIBS}
+	${APXS} ${LIBAPPARMOR_FLAGS} -c $<
 	mv .libs/$@ .

 .PHONY: install
 install: ${TARGET} ${MANPAGES}
 	mkdir -p ${DESTDIR}/${APXS_INSTALL_DIR}
 	install -m 755 $< ${DESTDIR}/${APXS_INSTALL_DIR}
-	$(MAKE) install_manpages DESTDIR=${DESTDIR}
+	make install_manpages DESTDIR=${DESTDIR}

 .PHONY: clean
-clean: pod_clean
+clean: _clean
 	rm -rf .libs
-	rm -f *.la *.lo *.so *.o *.slo
-
-.PHONY: check
-check: check_pod_files
+	rm -f *.la *.lo *.so *.o *.slo Make.rules
--- a/changehat/mod_apparmor/apache2-mod_apparmor.spec.in
+++ b/changehat/mod_apparmor/apache2-mod_apparmor.spec.in
@@ -0,0 +1,216 @@
+# $Id$
+# ----------------------------------------------------------------------
+#    Copyright (c) 2004, 2005 NOVELL (All rights reserved)
+#
+#    This program is free software; you can redistribute it and/or
+#    modify it under the terms of version 2 of the GNU General Public
+#    License published by the Free Software Foundation.
+#
+#    This program is distributed in the hope that it will be useful,
+#    but WITHOUT ANY WARRANTY; without even the implied warranty of
+#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#    GNU General Public License for more details.
+#
+#    You should have received a copy of the GNU General Public License
+#    along with this program; if not, contact Novell, Inc.
+# ----------------------------------------------------------------------
+# norootforbuild
+
+# Check first to see if distro is already defined.
+# I hate rpm macros
+%if ! %{?distro:1}0
+%if %{?suse_version:1}0
+  %define distro suse
+%endif
+%if %{?fedora_version:1}0
+  %define distro redhat
+%endif
+%endif
+%if ! %{?distro:1}0
+  %define distro suse
+%endif
+
+# this is required to be underscore
+%define module_name mod_apparmor
+
+Summary: AppArmor module for apache2.
+Name: apache2-mod_apparmor
+Version: @@immunix_version@@
+Release: @@repo_version@@
+Group: Applications/System
+Source0: %{name}-%{version}-@@repo_version@@.tar.gz
+License: LGPL
+BuildRoot: %{?_tmppath:}%{!?_tmppath:/var/tmp}/%{name}-%{version}-build
+Url: http://forge.novell.com/modules/xfmod/project/?apparmor
+Obsoletes: mod_change_hat mod-change-hat mod-apparmor apache2-mod-apparmor
+Provides: mod_change_hat mod-change-hat mod-apparmor apache2-mod-apparmor
+
+%if %{distro} == "suse"
+%if 0%{?suse_version} < 1010
+BuildRequires: libimmunix
+%else
+%if 0%{?suse_version} < 1030
+BuildRequires: libapparmor
+%else
+BuildRequires: libapparmor-devel
+%endif
+%endif
+%else
+BuildRequires: libapparmor-devel
+%endif
+
+%if %{distro} == "suse"
+%define apxs /usr/sbin/apxs2
+%define apache_mmn        %(MMN=$(%{apxs} -q LIBEXECDIR)_MMN; test -x $MMN && $MMN)
+Prereq: apache2-prefork
+Prereq: apparmor-parser
+BuildRequires: apache2-devel
+Requires:     apache2 %{apache_mmn}
+%else
+%if %{distro} == "redhat" || %{distro} == "rhel4"
+%define apxs /usr/sbin/apxs
+Prereq: httpd
+BuildRequires: httpd-devel
+%endif
+%endif
+%define module_path 		%(%{apxs} -q LIBEXECDIR)
+%define apache_sysconfdir	%(%{apxs} -q SYSCONFDIR)
+
+%description
+apache2-mod_apparmor adds support to apache2 to provide AppArmor confinement
+to individual cgi scripts handled by apache modules like mod_php and
+mod_perl.
+This package is part of a suite of tools that used to be named SubDomain.
+
+%prep
+
+%setup -q
+
+%build
+make APXS=%{apxs}
+
+%install
+make install DESTDIR=${RPM_BUILD_ROOT} DISTRO=%{distro} MANDIR=%{_mandir}
+
+%if %{distro} == "suse"
+       mkdir -p ${RPM_BUILD_ROOT}%{_libdir}/apache2-prefork/
+       ln -s %{module_path}/%{module_name}.so ${RPM_BUILD_ROOT}%{_libdir}/apache2-prefork/%{module_name}.so
+%else 
+  %if %{distro} == "redhat" || %{distro} == "rhel4"
+  	mkdir -p ${RPM_BUILD_ROOT}/%{apache_sysconfdir}.d/
+	install -m 644 %{module_name}.conf ${RPM_BUILD_ROOT}/%{apache_sysconfdir}.d/
+  %endif
+%endif
+
+%clean 
+[ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT
+
+%files
+%defattr(-,root,root)
+%{module_path}
+%if %{distro} == "suse"
+   %{_libdir}/apache2-prefork/%{module_name}.so
+%else
+  %if %{distro} == "redhat" || %{distro} == "rhel4"
+    %{apache_sysconfdir}.d/%{module_name}.conf
+  %endif
+%endif
+%doc COPYING.LGPL
+%{_mandir}/man*/*
+%doc *.[0-9].html
+%doc common/apparmor.css
+
+%post
+%if %{distro} == "suse"
+  /usr/sbin/a2enmod apparmor
+%endif
+
+%preun
+%if %{distro} == "suse"
+  if [ $1 = 0 ] ; then
+    /usr/sbin/a2dismod apparmor
+  fi
+%endif
+
+%triggerpostun -- mod_change_hat mod-change-hat
+%if %{distro} == "suse"
+  /usr/sbin/a2enmod apparmor
+%endif
+
+%changelog
+* Sun Jul 29 2007 - sbeattie@suse.de
+- Convert builddep on libapparmor to libapparmor-devel
+* Tue Apr  3 2007 - sbeattie@suse.de
+- Add mod_apparmor manpage to package
+* Wed Sep 06 2006 - poeml@suse.de
+- rename to apache2-mod_apparmor
+- use a2enmod instead of frob_sysconfig
+- remove SuSEconfig calls
+* Fri May 26 2006 - schwab@suse.de
+- Don't strip binaries.
+* Wed Apr 12 2006 - Steve Beattie <sbeattie@suse.de>
+- Move to novell forge svn repo; fix build issue with new layout
+* Thu Mar 30 2006 - Seth Arnold <seth.arnold@suse.de> 2.0-7.2
+- Relicense to LGPL
+* Mon Jan 30 2006 - Steve Beattie <sbeattie@suse.de> 2.0-7.1
+- Renamed apache config options:
+	ImmhatName -> AAHatName
+	ImmDefaultHatName -> AADefaultHatName
+* Mon Jan 30 2006 - poeml@suse.de
+- removed libapr-util1-devel from BuildRequires (apache2-devel does
+  require it)
+* Fri Jan 27 2006 Steve Beattie <sbeattie@suse.de> 2.0-6.1
+- No more neededforbuild in STABLE
+* Wed Jan 25 2006 Steve Beattie <sbeattie@suse.de> 2.0-6
+- Fix linking against libapparmor.so
+* Sun Jan  8 2006 Steve Beattie <sbeattie@suse.de> 2.0-5
+- More SUSE autobuild fixups.
+* Wed Jan  4 2006 Steve Beattie <sbeattie@suse.de> 2.0-4
+- Fixup SUSE autobuild require on apache-devel-packages
+- Add svn revision to the source tarball
+* Sun Dec 18 2005 Steve Beattie <sbeattie@novell.com> 2.0-3
+- Include symlink in %{_libdir}/apache2-prefork/
+* Thu Dec  8 2005 Steve Beattie <sbeattie@novell.com> 2.0-2
+- Rename to apache2-mod-apparmor for consistency w/SUSE packages
+- Rename module to mod_apparmor.so
+* Wed Dec  7 2005 Steve Beattie <sbeattie@novell.com> 2.0-1
+- Reset version for inclusion in SUSE autobuild
+* Mon Dec  5 2005 Steve Beattie <sbeattie@novell.com> 1.99-9
+- Rename package to mod-apparmor
+* Wed Nov 30 2005 Steve Beattie <sbeattie@novell.com> 1.99-8
+- Minor packaging cleanups
+* Wed Nov 30 2005 Steve Beattie <sbeattie@novell.com> 1.99-7_imnx
+- Convert license to GPL
+* Thu Jun 23 2005 Steve Beattie <sbeattie@novell.com> 1.99-6_imnx
+- Add trigger for mod_change_hat => mod-change-hat upgrades
+- Don't run SuSEconfig on SuSE 9.3 or newer
+* Mon May 23 2005 Steve Beattie <sbeattie@novell.com> 1.99-5_imnx
+- Fix package uninstall on RHEL4.
+* Fri Mar 11 2005 Steve Beattie <steve@immunix.com> 1.99-4_imnx
+- Rename to be consistent with other packages
+* Fri Feb 18 2005 Steve Beattie <steve@immunix.com> 1.99-3_imnx
+- Cleanup some non-64bit clean code, sigh.
+- Fix install locations on 64-bit platform.
+* Fri Feb  4 2005 Seth Arnold <sarnold@immunix.coM> 1.99-1_imnx
+- Reversion to 1.99
+* Fri Nov 12 2004 Steve Beattie <steve@immunix.com> 1.2-2_imnx
+- Add configuration file for redhat build
+* Tue Oct 12 2004 Steve Beattie <steve@immunix.com> 1.2-1_imnx
+- Bump version after shass-1.1 branched off
+* Mon Sep 20 2004 Dominic Reynolds <dominic@immunix.com> 1.0-7_imnx_(redhat|suse)
+- Modified to build separate versions for suse/redhat (EL3).
+- Note:RH version does not currently setup the module configuraiton
+- in apache.
+* Tue Aug 31 2004 Steve Beattie <steve@immunix.com> 1.0-6_imnx
+- Got location and per server config directives working somewhat
+  correctly :-)
+- copyright fixups.
+* Fri Aug 20 2004 Steve Beattie <steve@immunix.com> 1.0-5_imnx
+- added support for <Location> hatname </Location>
+* Wed Jul 21 2004 Steve Beattie <steve@immunix.com> 1.0-4_imnx
+- reduced loglevel of some debug messages
+- add change_hat to list of apache modules
+* Tue Jul 20 2004 Steve Beattie <steve@immunix.com> 1.0-2_imnx
+- got module actually working, at least in simple cases.
+* Thu Jul 15 2004 Steve Beattie <steve@immunix.com> 1.0-1_imnx
+- Initial package creation.
--- a/changehat/mod_apparmor/frob_sysconfig
+++ b/changehat/mod_apparmor/frob_sysconfig
@@ -1,5 +1,6 @@
 #!/usr/bin/perl -w
 #
+# $Id$
 # ----------------------------------------------------------------------
 #    Copyright (c) 2004, 2005 NOVELL (All rights reserved)
 #
--- a/changehat/mod_apparmor/mod_apparmor.c
+++ b/changehat/mod_apparmor/mod_apparmor.c
@@ -1,13 +1,13 @@
-/*
+/* $Id$
+ *
 *   Copyright (c) 2004, 2005, 2006 NOVELL (All rights reserved)
- *   Copyright (c) 2014 Canonical, Ltd. (All rights reserved)
 *
 *    The mod_apparmor module is licensed under the terms of the GNU
 *    Lesser General Public License, version 2.1. Please see the file
 *    COPYING.LGPL.
 *
 * mod_apparmor - (apache 2.0.x)
- * Author: Steve Beattie <steve@nxnw.org>
+ * Author: Steve Beattie <sbeattie@suse.de>
 *
 * This currently only implements change_hat functionality, but could be
 * extended for other stuff we decide to do.
@@ -18,240 +18,187 @@
 #include "http_config.h"
 #include "http_request.h"
 #include "http_log.h"
-#include "http_main.h"
 #include "http_protocol.h"
 #include "util_filter.h"
 #include "apr.h"
 #include "apr_strings.h"
 #include "apr_lib.h"

+#ifndef USE_COMPAT_IMMUNIX_H
 #include <sys/apparmor.h>
+#else
+#include <sys/immunix.h>
+#endif
 #include <unistd.h>

 /* #define DEBUG */
+#ifndef __unused
+#define __unused __attribute__((unused))
+#endif

 /* should the following be configurable? */
 #define DEFAULT_HAT "HANDLING_UNTRUSTED_INPUT"
 #define DEFAULT_URI_HAT "DEFAULT_URI"

-/* Compatibility with apache 2.2 */
-#if AP_SERVER_MAJORVERSION_NUMBER == 2 && AP_SERVER_MINORVERSION_NUMBER < 3
-  #define APLOG_TRACE1 APLOG_DEBUG
-  server_rec *ap_server_conf = NULL;
-#endif
-
-#ifdef APLOG_USE_MODULE
-  APLOG_USE_MODULE(apparmor);
-#endif
 module AP_MODULE_DECLARE_DATA apparmor_module;

-static unsigned long magic_token = 0;
+static unsigned int magic_token = 0;
 static int inside_default_hat = 0;

 typedef struct {
-        const char *hat_name;
-        char *path;
-} apparmor_dir_cfg;
+	const char * hat_name;
+	char * path;
+} immunix_dir_cfg;

 typedef struct {
-        const char *hat_name;
-        int is_initialized;
-} apparmor_srv_cfg;
+	const char * hat_name;
+	int is_initialized;
+} immunix_srv_cfg;

-/* aa_init() gets invoked in the post_config stage of apache.
+/* immunix_init() gets invoked in the post_config stage of apache.
 * Unfortunately, apache reads its config once when it starts up, then
 * it re-reads it when goes into its restart loop, where it starts it's
 * children. This means we cannot call change_hat here, as the modules
 * memory will be wiped out, and the magic_token will be lost, so apache
 * wouldn't be able to change_hat back out. */
-static int
-aa_init(apr_pool_t *p, apr_pool_t *plog, apr_pool_t *ptemp, server_rec *s)
+static int 
+immunix_init (apr_pool_t *p, apr_pool_t *plog, apr_pool_t *ptemp, server_rec *s)
 {
-    apr_file_t *file;
-    apr_size_t size = sizeof(magic_token);
+    apr_file_t * file;
+    apr_size_t size = sizeof (magic_token);
    int ret;

    ret = apr_file_open (&file, "/dev/urandom", APR_READ, APR_OS_DEFAULT, p);
    if (!ret) {
-        apr_file_read(file, (void *) &magic_token, &size);
-        apr_file_close(file);
+    	apr_file_read (file, (void *) &magic_token, &size);
+	apr_file_close (file);
    } else {
-        ap_log_error(APLOG_MARK, APLOG_ERR, errno, ap_server_conf,
-                     "Failed to open /dev/urandom");
+        ap_log_error (APLOG_MARK, APLOG_ERR, 0, NULL, "Failed to open /dev/urandom");
    }
-    ap_log_error(APLOG_MARK, APLOG_TRACE1, 0, ap_server_conf,
-                 "Opened /dev/urandom successfully");
+    ap_log_error (APLOG_MARK, APLOG_DEBUG, 0, NULL, "Opened /dev/urandom successfully");

    return OK;
 }
-
+    
 /* As each child starts up, we'll change_hat into a default hat, mostly
 * to protect ourselves from bugs in parsing network input, but before
 * we change_hat to the uri specific hat. */
-static void
-aa_child_init(apr_pool_t *p, server_rec *s)
+static void 
+immunix_child_init (apr_pool_t *p, server_rec *s)
 {
    int ret;

-    ap_log_error(APLOG_MARK, APLOG_TRACE1, 0, ap_server_conf,
-                 "init: calling change_hat with '%s'", DEFAULT_HAT);
-    ret = aa_change_hat(DEFAULT_HAT, magic_token);
+    ap_log_error (APLOG_MARK, APLOG_DEBUG, 0, NULL, "init: calling change_hat");
+    ret = change_hat (DEFAULT_HAT, magic_token);
    if (ret < 0) {
-        ap_log_error(APLOG_MARK, APLOG_ERR, errno, ap_server_conf,
-                     "Failed to change_hat to '%s'", DEFAULT_HAT);
+    	change_hat (NULL, magic_token);
+        ap_log_error (APLOG_MARK, APLOG_ERR, 0, NULL, "Failed to change_hat to '%s'",
+			DEFAULT_HAT);
    } else {
        inside_default_hat = 1;
    }
-}
+}    			 

+#ifdef DEBUG
 static void
-debug_dump_uri(request_rec *r)
+debug_dump_uri (apr_uri_t * uri) 
 {
-    apr_uri_t *uri = &r->parsed_uri;
-    if (uri)
-        ap_log_rerror(APLOG_MARK, APLOG_TRACE1, 0, r, "Dumping uri info "
-                      "scheme='%s' host='%s' path='%s' query='%s' fragment='%s'",
-                      uri->scheme, uri->hostname, uri->path, uri->query,
-                      uri->fragment);
+    if (uri) 
+    	ap_log_error (APLOG_MARK, APLOG_ERR, 0, NULL, "Dumping uri info "
+    	          "scheme='%s' host='%s' path='%s' query='%s' fragment='%s'",
+    		  uri->scheme, uri->hostname, uri->path, uri->query,
+		  uri->fragment);
    else
-        ap_log_rerror(APLOG_MARK, APLOG_TRACE1, 0, r, "Asked to dump NULL uri");
+    	ap_log_error (APLOG_MARK, APLOG_ERR, 0, NULL, "Asked to dump NULL uri");

 }
-
-/*
-   aa_enter_hat will attempt to change_hat in the following order:
+#else
+static void
+debug_dump_uri (apr_uri_t * __unused uri) { }
+#endif
+    
+/* 
+   immunix_enter_hat will attempt to change_hat in the following order:
   (1) to a hatname in a location directive
-   (2) to the server name or a defined per-server default
-   (3) to the server name + "-" + uri
-   (4) to the uri
-   (5) to DEFAULT_URI
-   (6) back to the parent profile
+   (2) to the uri
+   (3) to a per-server default 
+   (4) to DEFAULT_URI
+   (5) back to the parent profile
 */
-static int
-aa_enter_hat(request_rec *r)
+static int 
+immunix_enter_hat (request_rec *r)
 {
-    int aa_ret = -1;
-    apparmor_dir_cfg *dcfg = (apparmor_dir_cfg *)
-                    ap_get_module_config(r->per_dir_config, &apparmor_module);
-    apparmor_srv_cfg *scfg = (apparmor_srv_cfg *)
-                    ap_get_module_config(r->server->module_config, &apparmor_module);
-    const char *aa_hat_array[6] = { NULL, NULL, NULL, NULL, NULL, NULL };
-    int i = 0;
-    char *aa_label, *aa_mode, *aa_hat;
-    const char *vhost_uri;
+    int sd_ret = -1;
+    immunix_dir_cfg * dcfg = (immunix_dir_cfg *) 
+    		ap_get_module_config (r->per_dir_config, &apparmor_module);
+    immunix_srv_cfg * scfg = (immunix_srv_cfg *) 
+    		ap_get_module_config (r->server->module_config, &apparmor_module);

-    debug_dump_uri(r);
-    ap_log_rerror(APLOG_MARK, APLOG_TRACE1, 0, r, "aa_enter_hat (%s) n:0x%lx p:0x%lx main:0x%lx",
-                  dcfg->path, (unsigned long) r->next, (unsigned long) r->prev,
-                  (unsigned long) r->main);
+    debug_dump_uri (&r->parsed_uri);
+    ap_log_error (APLOG_MARK, APLOG_DEBUG, 0, NULL, "in immunix_enter_hat (%s) n:0x%lx p:0x%lx main:0x%lx", 
+    	dcfg->path, (unsigned long) r->next, (unsigned long) r->prev, 
+	(unsigned long) r->main);

    /* We only call change_hat for the main request, not subrequests */
-    if (r->main)
-        return OK;
+    if (r->main) 
+    	return OK;

    if (inside_default_hat) {
-        aa_change_hat(NULL, magic_token);
-        inside_default_hat = 0;
+        change_hat (NULL, magic_token);
+	inside_default_hat = 0;
    }

    if (dcfg != NULL && dcfg->hat_name != NULL) {
-        ap_log_rerror(APLOG_MARK, APLOG_DEBUG, 0, r,
-                      "[dcfg] adding hat '%s' to aa_change_hat vector", dcfg->hat_name);
-        aa_hat_array[i++] = dcfg->hat_name;
+        ap_log_error (APLOG_MARK, APLOG_DEBUG, 0, NULL, "calling change_hat [dcfg] %s", dcfg->hat_name);
+        sd_ret = change_hat (dcfg->hat_name, magic_token);
+	if (sd_ret < 0) {
+	    change_hat (NULL, magic_token);
+	} else {
+	    return OK;
+	}
    }

-    if (scfg) {
-        ap_log_rerror(APLOG_MARK, APLOG_TRACE1, 0, r, "Dumping scfg info: "
-                      "scfg='0x%lx' scfg->hat_name='%s'",
-                      (unsigned long) scfg, scfg->hat_name);
+    ap_log_error (APLOG_MARK, APLOG_DEBUG, 0, NULL, "calling change_hat [uri] %s", r->uri);
+    sd_ret = change_hat (r->uri, magic_token);
+    if (sd_ret < 0) {
+    	change_hat (NULL, magic_token);
    } else {
-        ap_log_rerror(APLOG_MARK, APLOG_TRACE1, 0, r, "scfg is null");
-    }
-    if (scfg != NULL) {
-        if (scfg->hat_name != NULL) {
-            ap_log_rerror(APLOG_MARK, APLOG_DEBUG, 0, r,
-                          "[scfg] adding hat '%s' to aa_change_hat vector", scfg->hat_name);
-            aa_hat_array[i++] = scfg->hat_name;
-        } else {
-            ap_log_rerror(APLOG_MARK, APLOG_DEBUG, 0, r,
-                          "[scfg] adding server_name '%s' to aa_change_hat vector",
-                          r->server->server_hostname);
-            aa_hat_array[i++] = r->server->server_hostname;
-        }
-
-        vhost_uri = apr_pstrcat(r->pool, r->server->server_hostname, "-", r->uri, NULL);
-        ap_log_rerror(APLOG_MARK, APLOG_DEBUG, 0, r,
-                      "[vhost+uri] adding vhost+uri '%s' to aa_change_hat vector", vhost_uri);
-        aa_hat_array[i++] = vhost_uri;
+	    return OK;
    }

-    ap_log_rerror(APLOG_MARK, APLOG_DEBUG, 0, r,
-                  "[uri] adding uri '%s' to aa_change_hat vector", r->uri);
-    aa_hat_array[i++] = r->uri;
-
-    ap_log_rerror(APLOG_MARK, APLOG_DEBUG, 0, r,
-                  "[default] adding '%s' to aa_change_hat vector", DEFAULT_URI_HAT);
-    aa_hat_array[i++] = DEFAULT_URI_HAT;
-
-    aa_ret = aa_change_hatv(aa_hat_array, magic_token);
-    if (aa_ret < 0) {
-        ap_log_rerror(APLOG_MARK, APLOG_WARNING, errno, r, "aa_change_hatv call failed");
+    if (scfg != NULL && scfg->hat_name != NULL) {
+        ap_log_error (APLOG_MARK, APLOG_DEBUG, 0, NULL, "calling change_hat [scfg] %s", scfg->hat_name);
+        sd_ret = change_hat (scfg->hat_name, magic_token);
+	if (sd_ret < 0) {
+	    change_hat (NULL, magic_token);
+	} else {
+	    return OK;
+	}
    }

-    /* Check to see if a defined AAHatName or AADefaultHatName would
-     * apply, but wasn't the hat we landed up in; report a warning if
-     * that's the case. */
-    aa_ret = aa_getcon(&aa_label, &aa_mode);
-    if (aa_ret < 0) {
-        ap_log_rerror(APLOG_MARK, APLOG_WARNING, errno, r, "aa_getcon call failed");
-    } else {
-        ap_log_rerror(APLOG_MARK, APLOG_TRACE1, 0, r,
-                      "AA checks: aa_getcon result is '%s', mode '%s'", aa_label, aa_mode);
-        /* TODO: use libapparmor get hat_name fn here once it is implemented */
-        aa_hat = strstr(aa_label, "//");
-        if (aa_hat != NULL && strcmp(aa_mode, "enforce") == 0) {
-            aa_hat += 2;  /* skip "//" */
-            ap_log_rerror(APLOG_MARK, APLOG_TRACE1, 0, r,
-                          "AA checks: apache is in hat '%s', mode '%s'", aa_hat, aa_mode);
-            if (dcfg != NULL && dcfg->hat_name != NULL) {
-                if (strcmp(aa_hat, dcfg->hat_name) != 0)
-                    ap_log_rerror(APLOG_MARK, APLOG_WARNING, 0, r,
-                        "AAHatName '%s' applies, but does not appear to be a hat in the apache apparmor policy",
-                        dcfg->hat_name);
-            } else if (scfg != NULL && scfg->hat_name != NULL) {
-                if (strcmp(aa_hat, scfg->hat_name) != 0 &&
-                    strcmp(aa_hat, r->uri) != 0)
-                    ap_log_rerror(APLOG_MARK, APLOG_WARNING, 0, r,
-                        "AADefaultHatName '%s' applies, but does not appear to be a hat in the apache apparmor policy",
-                        scfg->hat_name);
-            }
-        }
-        free(aa_label);
-    }
+    ap_log_error (APLOG_MARK, APLOG_DEBUG, 0, NULL, "calling change_hat DEFAULT_URI");
+    sd_ret = change_hat (DEFAULT_URI_HAT, magic_token);
+    if (sd_ret < 0) change_hat (NULL, magic_token);

    return OK;
 }

-static int
-aa_exit_hat(request_rec *r)
+static int 
+immunix_exit_hat (request_rec *r)
 {
-    int aa_ret;
-    apparmor_dir_cfg *dcfg = (apparmor_dir_cfg *)
-                    ap_get_module_config(r->per_dir_config, &apparmor_module);
-    /* apparmor_srv_cfg *scfg = (apparmor_srv_cfg *)
-                    ap_get_module_config(r->server->module_config, &apparmor_module); */
-    ap_log_rerror(APLOG_MARK, APLOG_TRACE1, 0, r, "exiting change_hat: dir hat %s dir path %s",
-                  dcfg->hat_name, dcfg->path);
+    int sd_ret;
+    immunix_dir_cfg * dcfg = (immunix_dir_cfg *) 
+    		ap_get_module_config (r->per_dir_config, &apparmor_module);
+    /* immunix_srv_cfg * scfg = (immunix_srv_cfg *)
+    		ap_get_module_config (r->server->module_config, &apparmor_module); */
+    ap_log_error (APLOG_MARK, APLOG_DEBUG, 0, NULL, "exiting change_hat - dir hat %s path %s", dcfg->hat_name, dcfg->path);
+    change_hat (NULL, magic_token);

-    /* can convert the following back to aa_change_hat() when the
-     * aa_change_hat() bug addressed in trunk commit 2329 lands in most
-     * system libapparmors */
-    aa_change_hatv(NULL, magic_token);
-
-    aa_ret = aa_change_hat(DEFAULT_HAT, magic_token);
-    if (aa_ret < 0) {
-        ap_log_rerror(APLOG_MARK, APLOG_ERR, errno, r,
-                      "Failed to change_hat to '%s'", DEFAULT_HAT);
+    sd_ret = change_hat (DEFAULT_HAT, magic_token);
+    if (sd_ret < 0) {
+    	change_hat (NULL, magic_token);
+        ap_log_error (APLOG_MARK, APLOG_ERR, 0, NULL, "Failed to change_hat to '%s'",
+			DEFAULT_HAT);
    } else {
        inside_default_hat = 1;
    }
@@ -260,15 +207,15 @@ aa_exit_hat(request_rec *r)
 }

 static const char *
-aa_cmd_ch_path(cmd_parms *cmd, void *mconfig, const char *parm1)
+aa_cmd_ch_path (cmd_parms * cmd, void * mconfig, const char * parm1)
 {
-    ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, ap_server_conf, "directory config change hat %s",
-                 parm1 ? parm1 : "DEFAULT");
-    apparmor_dir_cfg *dcfg = mconfig;
+    ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, NULL, "config change hat %s",
+    			parm1 ? parm1 : "DEFAULT");
+    immunix_dir_cfg * dcfg = mconfig;
    if (parm1 != NULL) {
-        dcfg->hat_name = parm1;
+    	dcfg->hat_name = parm1;
    } else {
-        dcfg->hat_name = "DEFAULT";
+    	dcfg->hat_name = "DEFAULT";
    }
    return NULL;
 }
@@ -276,27 +223,26 @@ aa_cmd_ch_path(cmd_parms *cmd, void *mconfig, const char *parm1)
 static int path_warn_once;

 static const char *
-immunix_cmd_ch_path(cmd_parms *cmd, void *mconfig, const char *parm1)
+immunix_cmd_ch_path (cmd_parms * cmd, void * mconfig, const char * parm1)
 {
    if (path_warn_once == 0) {
-        ap_log_error(APLOG_MARK, APLOG_NOTICE, 0, ap_server_conf, "ImmHatName is "
-                     "deprecated, please use AAHatName instead");
-        path_warn_once = 1;
+    	ap_log_error(APLOG_MARK, APLOG_NOTICE, 0, NULL, "ImmHatName is "
+		     "deprecated, please use AAHatName instead");
+	path_warn_once = 1;
    }
    return aa_cmd_ch_path(cmd, mconfig, parm1);
 }

 static const char *
-aa_cmd_ch_srv(cmd_parms *cmd, void *mconfig, const char *parm1)
+aa_cmd_ch_srv (cmd_parms * cmd, void * mconfig, const char * parm1)
 {
-    ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, ap_server_conf, "server config change hat %s",
-                            parm1 ? parm1 : "DEFAULT");
-    apparmor_srv_cfg *scfg = (apparmor_srv_cfg *)
-            ap_get_module_config(cmd->server->module_config, &apparmor_module);
+    ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, NULL, "config change hat %s",
+    			parm1 ? parm1 : "DEFAULT");
+    immunix_srv_cfg * scfg = mconfig;
    if (parm1 != NULL) {
-        scfg->hat_name = parm1;
+    	scfg->hat_name = parm1;
    } else {
-        scfg->hat_name = "DEFAULT";
+    	scfg->hat_name = "DEFAULT";
    }
    return NULL;
 }
@@ -304,29 +250,27 @@ aa_cmd_ch_srv(cmd_parms *cmd, void *mconfig, const char *parm1)
 static int srv_warn_once;

 static const char *
-immunix_cmd_ch_srv(cmd_parms *cmd, void *mconfig, const char *parm1)
+immunix_cmd_ch_srv (cmd_parms * cmd, void * mconfig, const char * parm1)
 {
    if (srv_warn_once == 0) {
-        ap_log_error(APLOG_MARK, APLOG_NOTICE, 0, ap_server_conf, "ImmDefaultHatName is "
-                     "deprecated, please use AADefaultHatName instead");
-        srv_warn_once = 1;
+	ap_log_error(APLOG_MARK, APLOG_NOTICE, 0, NULL, "ImmDefaultHatName is "
+		     "deprecated, please use AADefaultHatName instead");
+	srv_warn_once = 1;
    }
    return aa_cmd_ch_srv(cmd, mconfig, parm1);
 }

 static void *
-aa_create_dir_config(apr_pool_t *p, char *path)
+immunix_create_dir_config (apr_pool_t * p, char * path)
 {
-    apparmor_dir_cfg *newcfg = (apparmor_dir_cfg *) apr_pcalloc(p, sizeof(*newcfg));
+    immunix_dir_cfg * newcfg = (immunix_dir_cfg *) apr_pcalloc(p, sizeof(* newcfg));

-    ap_log_error(APLOG_MARK, APLOG_TRACE1, 0, ap_server_conf,
-                 "aa_create_dir_cfg (%s)", path ? path : ":no path:");
+    ap_log_error (APLOG_MARK, APLOG_DEBUG, 0, NULL, "in immunix_create_dir (%s)", path ? path : ":no path:");
    if (newcfg == NULL) {
-        ap_log_error(APLOG_MARK, APLOG_ERR, 0, ap_server_conf,
-                     "aa_create_dir_config: couldn't alloc dir config");
-        return NULL;
+        ap_log_error (APLOG_MARK, APLOG_ERR, 0, NULL, "immunix_create_dir: couldn't alloc dir config");
+    	return NULL;
    }
-    newcfg->path = apr_pstrdup(p, path ? path : ":no path:");
+    newcfg->path = apr_pstrdup (p, path ? path : ":no path:");

    return newcfg;
 }
@@ -334,85 +278,83 @@ aa_create_dir_config(apr_pool_t *p, char *path)
 /* XXX: Should figure out an appropriate action to take here, if any

 static void *
-aa_merge_dir_config(apr_pool_t *p, void *parent, void *child)
+immunix_merge_dir_config (apr_pool_t * p, void * parent, void * child)
 {
-    apparmor_dir_cfg *newcfg = (apparmor_dir_cfg *) apr_pcalloc(p, sizeof(*newcfg));
+    immunix_dir_cfg * newcfg = (immunix_dir_cfg *) apr_pcalloc(p, sizeof(* newcfg));

-    ap_log_error(APLOG_MARK, APLOG_TRACE1, 0, ap_server_conf, "in immunix_merge_dir ()");
+    ap_log_error (APLOG_MARK, APLOG_DEBUG, 0, NULL, "in immunix_merge_dir ()");
    if (newcfg == NULL)
-            return NULL;
+    	return NULL;

    return newcfg;
 }
 */

 static void *
-aa_create_srv_config(apr_pool_t *p, server_rec *srv)
+immunix_create_srv_config (apr_pool_t * p, server_rec * srv)
 {
-    apparmor_srv_cfg *newcfg = (apparmor_srv_cfg *) apr_pcalloc(p, sizeof(*newcfg));
+    immunix_srv_cfg * newcfg = (immunix_srv_cfg *) apr_pcalloc(p, sizeof(* newcfg));

-    ap_log_error(APLOG_MARK, APLOG_TRACE1, 0, ap_server_conf,
-                 "in aa_create_srv_config");
+    ap_log_error (APLOG_MARK, APLOG_DEBUG, 0, NULL, "in immunix_create_srv");
    if (newcfg == NULL) {
-        ap_log_error(APLOG_MARK, APLOG_ERR, 0, ap_server_conf,
-                     "aa_create_srv_config: couldn't alloc srv config");
-        return NULL;
+        ap_log_error (APLOG_MARK, APLOG_ERR, 0, NULL, "immunix_create_srv: couldn't alloc srv config");
+    	return NULL;
    }

    return newcfg;
 }


-static const command_rec mod_apparmor_cmds[] = {
+static const command_rec immunix_cmds[] = {

-    AP_INIT_TAKE1(
+    AP_INIT_TAKE1 (
        "ImmHatName",
-        immunix_cmd_ch_path,
-        NULL,
-        ACCESS_CONF,
-        ""
+	immunix_cmd_ch_path,
+	NULL,
+	ACCESS_CONF,
+	""
    ),
-    AP_INIT_TAKE1(
+    AP_INIT_TAKE1 (
        "ImmDefaultHatName",
-        immunix_cmd_ch_srv,
-        NULL,
-        RSRC_CONF,
-        ""
+	immunix_cmd_ch_srv,
+	NULL,
+	RSRC_CONF,
+	""
    ),
-    AP_INIT_TAKE1(
+    AP_INIT_TAKE1 (
        "AAHatName",
-        aa_cmd_ch_path,
-        NULL,
-        ACCESS_CONF,
-        ""
+	aa_cmd_ch_path,
+	NULL,
+	ACCESS_CONF,
+	""
    ),
-    AP_INIT_TAKE1(
+    AP_INIT_TAKE1 (
        "AADefaultHatName",
-        aa_cmd_ch_srv,
-        NULL,
-        RSRC_CONF,
-        ""
+	aa_cmd_ch_srv,
+	NULL,
+	RSRC_CONF,
+	""
    ),
    { NULL }
 };

-static void
-register_hooks(apr_pool_t *p)
+static void 
+register_hooks (apr_pool_t *p)
 {
-    ap_hook_post_config(aa_init, NULL, NULL, APR_HOOK_MIDDLE);
-    ap_hook_child_init(aa_child_init, NULL, NULL, APR_HOOK_MIDDLE);
-    ap_hook_access_checker(aa_enter_hat, NULL, NULL, APR_HOOK_FIRST);
-    /* ap_hook_post_read_request(aa_enter_hat, NULL, NULL, APR_HOOK_FIRST); */
-    ap_hook_log_transaction(aa_exit_hat, NULL, NULL, APR_HOOK_LAST);
+    ap_hook_post_config (immunix_init, NULL, NULL, APR_HOOK_MIDDLE);
+    ap_hook_child_init (immunix_child_init, NULL, NULL, APR_HOOK_MIDDLE);
+    ap_hook_access_checker(immunix_enter_hat, NULL, NULL, APR_HOOK_FIRST);
+    /* ap_hook_post_read_request(immunix_enter_hat, NULL, NULL, APR_HOOK_FIRST); */
+    ap_hook_log_transaction(immunix_exit_hat, NULL, NULL, APR_HOOK_LAST);
 }

 module AP_MODULE_DECLARE_DATA apparmor_module = {
    STANDARD20_MODULE_STUFF,
-    aa_create_dir_config,        /* dir config creater */
-    NULL,                        /* dir merger --- default is to override */
-    /* immunix_merge_dir_config, */        /* dir merger --- default is to override */
-    aa_create_srv_config,        /* server config */
-    NULL,                        /* merge server config */
-    mod_apparmor_cmds,           /* command table */
-    register_hooks               /* register hooks */
+    immunix_create_dir_config,	/* dir config creater */
+    NULL,			/* dir merger --- default is to override */
+    /* immunix_merge_dir_config, */	/* dir merger --- default is to override */
+    immunix_create_srv_config,	/* server config */
+    NULL,			/* merge server config */
+    immunix_cmds,		/* command table */
+    register_hooks		/* register hooks */
 };
--- a/changehat/mod_apparmor/mod_apparmor.pod
+++ b/changehat/mod_apparmor/mod_apparmor.pod
@@ -1,145 +1,96 @@
-# This publication is intellectual property of Novell Inc. and Canonical
-# Ltd. Its contents can be duplicated, either in part or in whole, provided
-# that a copyright label is visibly located on each copy.
+# $Id$
+# This publication is intellectual property of Novell Inc. Its contents
+# can be duplicated, either in part or in whole, provided that a copyright
+# label is visibly located on each copy.
 #
 # All information found in this book has been compiled with utmost
 # attention to detail. However, this does not guarantee complete accuracy.
-# Neither SUSE LINUX GmbH, Canonical Ltd, the authors, nor the translators
-# shall be held liable for possible errors or the consequences thereof.
+# Neither SUSE LINUX GmbH, the authors, nor the translators shall be held
+# liable for possible errors or the consequences thereof.
 #
 # Many of the software and hardware descriptions cited in this book
 # are registered trademarks. All trade names are subject to copyright
 # restrictions and may be registered trade marks. SUSE LINUX GmbH
-# and Canonical Ltd. essentially adhere to the manufacturer's spelling.
+# essentially adheres to the manufacturer's spelling.
 #
 # Names of products and trademarks appearing in this book (with or without
 # specific notation) are likewise subject to trademark and trade protection
 # laws and may thus fall under copyright restrictions.
 #
+# Please direct suggestions and comments to apparmor-general@forge.novell.com.


 =pod

 =head1 NAME

-mod_apparmor - fine-grained AppArmor confinement for Apache
+mod_apparmor - fine-grained AppArmor confinement for apache

 =head1 DESCRIPTION

 An AppArmor profile applies to an executable program; if a portion of
 the program needs different access permissions than other portions,
-the program can "change hats" via aa_change_hat(2) to a different role,
-also known as a subprofile.  The mod_apparmor Apache module uses the
-aa_change_hat(2) mechanism to offer more fine-grained confinement of dynamic
-elements within Apache such as individual php and perl scripts, while
+the program can "change hats" via change_hat(2) to a different role,
+also known as a subprofile.  The mod_apparmor apache module uses the
+change_hat(2) mechanism to offer more fine-grained confinement of dynamic
+elements within apache such as individual php and perl scripts, while
 still allowing the performance benefits of using mod_php and mod_perl.

-To use mod_apparmor with Apache, ensure that mod_apparmor is configured to
-be loaded into Apache, either via a2enmod, yast or manual editing of the
-apache2(8)/httpd(8) configuration files, and restart Apache. Make sure that
-apparmor is also functioning.
+To use mod_apparmor with apache, ensure that mod_apparmor is configured to
+be loaded into apache, either via yast or manual editing of the httpd(8)
+configuration files, and restart apache. Make sure that apparmor is also
+functioning.

-Once mod_apparmor is loaded within Apache, all requests to Apache will
-cause mod_apparmor to attempt to change into a hat that matches the
-ServerName for the server/vhost.  If no such hat is found, it will
-first fall back by attempting to change into a hat composed of the
-ServerName-URI (e.g. "www.example.com-/app/some.cgi").  If that hat
-is not found, it will fall back to attempting to use the hat named
-by the URI (e.g. "/app/some.cgi"). If that hat is not found, it will
-fall back to attempting to use the hat DEFAULT_URI; if that also does
-not exist, it will fall back to using the global Apache profile. Most
-static web pages can simply make use of the DEFAULT_URI hat.
+Once mod_apparmor is loaded within apache, all requests to apache will
+cause mod_apparmor to attempt to change into a hat named by the URI
+(e.g. /app/some.cgi). If no such hat is found, it will fall back to
+attempting to use the hat DEFAULT_URI; if that also does not exist,
+it will fall back to using the global apache profile. Most static web
+pages can simply make use of the DEFAULT_URI hat.

-Additionally, before any requests come in to Apache, mod_apparmor
-will attempt to change hat into the HANDLING_UNTRUSTED_INPUT hat.
-mod_apparmor will attempt to use this hat while Apache is doing the
-initial parsing of a given http request, before its given to a specific
-handler (like mod_php) for processing.
-
-Because defining hats for every URI/URL often becomes tedious, mod_apparmor
-provides the AAHatName and AADefaultHatName Apache configuration options.
+However, defining hats for every URI/URL would become tedious, so there
+are a couple of configuration options that mod_apparmor supports:

 =over 4

 =item B<AAHatName>

-AAHatName allows you to specify a hat to be used for a given Apache
-E<lt>DirectoryE<gt>, E<lt>DirectoryMatchE<gt>, E<lt>LocationE<gt> or
-E<lt>LocationMatchE<gt> directive (see the Apache documentation for more
+AAHatName allows you to specify a hat to be used for a given apache
+directory or location directive (see the apache documenation for more
 details). Note that mod_apparmor behavior can become confused if
-E<lt>Directory*E<gt> and E<lt>Location*E<gt> directives are intermingled
-and it is recommended to use one type of directive. If the hat specified by
-AAHatName does not exist in the Apache profile, then it falls back to the
-behavior described above.
+directory and location directives are intermingled; it's preferred to
+stick to one type of directive. If the hat specified by AAHatName does
+not exist in the apache profile, then it falls back to the behavior
+above.

 =item B<AADefaultHatName>

 AADefaultHatName allows you to specify a default hat to be used for
-virtual hosts and other Apache server directives, so that you can have
+vhosts and other apache server directives, so that you can have
 different defaults for different virtual hosts. This can be overridden
-by the AAHatName directive and is checked for only if there isn't
-a matching AAHatName. The default value of AADefaultHatName is the
-ServerName for the server/vhost configuration.  If the AADefaultHatName
-hat does not exist, then it falls back to the behavior described above.
+by an AAHatName directive. If the AADefaultHatName hat does not exist,
+it falls back to the behavior described above.

 =back

-=head1 URI REQUEST SUMMARY
-
-When profiling with mod_apparmor, it is helpful to keep the following order
-of operations in mind:
-
-On each URI request, mod_apparmor will first aa_change_hat(2) into
-^HANDLING_UNTRUSTED_INPUT, if it exists.
-
-Then, after performing the initial parsing of the request, mod_apparmor
-will:
-
-=over 4
-
-=item 1
-
-try to aa_change_hat(2) into a matching AAHatName hat if it exists and
-applies, otherwise it will
-
-=item 2
-
-try to aa_change_hat(2) into an AADefaultHatName hat, either the
-ServerName (the default) or the configuration value specified by the
-AADefaultHatName directive, for the server/vhost, otherwise it will
-
-=item 3
-
-try to aa_change_hat(2) into the ServerName-URI, otherwise it will
-
-=item 4
-
-try to aa_change_hat(2) into the URI itself, otherwise it will
-
-=item 5
-
-try to aa_change_hat(2) into the DEFAULT_URI hat, if it exists, otherwise it
-will
-
-=item 6
-
-fall back to the global Apache policy
-
-=back
+Additionally, before any requests come in to apache, mod_apparmor
+will attempt to change hat into the HANDLING_UNTRUSTED_INPUT hat.
+mod_apparmor will attempt to use this hat while apache is doing the
+initial parsing of a given http request, before its given to a specific
+handler (like mod_php) for processing.

 =head1 BUGS

 mod_apparmor() currently only supports apache2, and has only been tested
-with the prefork MPM configuration -- threaded configurations of Apache
-may not work correctly. For Apache 2.4 users, you should enable the mpm_prefork
-module.
+with the prefork MPM configuration -- threaded configurations of apache
+may not work correctly.

 There are likely other bugs lurking about; if you find any, please report
-them at L<https://bugs.launchpad.net/apparmor/+filebug>.
+them to bugzilla at L<http://bugzilla.novell.com>.

 =head1 SEE ALSO

-apparmor(7), subdomain.conf(5), apparmor_parser(8), aa_change_hat(2) and
-L<https://wiki.apparmor.net>.
+apparmor(7), subdomain.conf(5), apparmor_parser(8), and
+L<http://forge.novell.com/modules/xfmod/project/?apparmor>.

 =cut
--- a/changehat/pam_apparmor/Makefile
+++ b/changehat/pam_apparmor/Makefile
@@ -1,6 +1,6 @@
+# 	$Id$
 # ----------------------------------------------------------------------
 #    Copyright (c) 1999, 2004, 2005 NOVELL (All rights reserved)
-#    Copyright (c) 2016 Canonical, Ltd.
 #
 #    This program is free software; you can redistribute it and/or
 #    modify it under the terms of version 2 of the GNU General Public
@@ -17,57 +17,22 @@
 NAME=pam_apparmor
 all:
 COMMONDIR=../../common/
+MAKE_RULES=common/Make.rules

-include $(COMMONDIR)/Make.rules
+include ${MAKE_RULES}

-ifdef USE_SYSTEM
-  LIBAPPARMOR = $(shell if pkg-config --exists libapparmor ; then \
-                                pkg-config --silence-errors --libs libapparmor ; \
-                        elif ldconfig -p | grep -q libapparmor\.so$$ ; then \
-                                echo -lapparmor ; \
-                        fi )
-  ifeq ($(strip $(LIBAPPARMOR)),)
-    ERROR_MESSAGE = $(error ${nl}\
-************************************************************************${nl}\
-Unable to find libapparmor installed on this system; either${nl}\
-install libapparmor devel packages, set the LIBAPPARMOR variable${nl}\
-manually, or build against in-tree libapparmor.${nl}\
-************************************************************************${nl})
-  endif
-  LIBAPPARMOR_INCLUDE =
-  AA_LDLIBS = $(LIBAPPARMOR)
-  AA_LINK_FLAGS =
-else
-  LIBAPPARMOR_SRC := ../../libraries/libapparmor/
-  LIBAPPARMOR_INCLUDE_PATH = $(LIBAPPARMOR_SRC)/include
-  LIBAPPARMOR_PATH := $(LIBAPPARMOR_SRC)/src/.libs/
-    ifeq ($(realpath $(LIBAPPARMOR_PATH)/libapparmor.a),)
-        ERROR_MESSAGE = $(error ${nl}\
-************************************************************************${nl}\
-$(LIBAPPARMOR_PATH)/libapparmor.a is missing; either build against${nl}\
-the in-tree libapparmor by building it first and then trying again${nl}\
-(see the top-level README for help) or build against the system${nl}\
-libapparmor by adding USE_SYSTEM=1 to your make command.${nl}\
-************************************************************************${nl})
-    endif
-  LIBAPPARMOR_INCLUDE = -I$(LIBAPPARMOR_INCLUDE_PATH)
-  AA_LINK_FLAGS = -L$(LIBAPPARMOR_PATH)
-  AA_LDLIBS = -lapparmor
+COMMONDIR_EXISTS=$(strip $(shell [ -d ${COMMONDIR} ] && echo true))
+ifeq ($(COMMONDIR_EXISTS), true)
+common/Make.rules: $(COMMONDIR)/Make.rules
+	ln -sf $(COMMONDIR) .
 endif
-EXTRA_CFLAGS=$(CFLAGS) $(CPPFLAGS) -fPIC -shared -Wall $(LIBAPPARMOR_INCLUDE)
-LINK_FLAGS=-Xlinker -x $(AA_LINK_FLAGS) $(LDFLAGS)
-LIBS=-lpam $(AA_LDLIBS)
+
+EXTRA_CFLAGS=$(CFLAGS) -fPIC -shared -Wall
+LINK_FLAGS=-Xlinker -x
+LIBS=-lpam -lapparmor
 OBJECTS=${NAME}.o get_options.o

-.PHONY: libapparmor_check
-.SILENT: libapparmor_check
-libapparmor_check: ; $(ERROR_MESSAGE)
-
-all: libapparmor_check $(NAME).so docs
-
-.PHONY: docs
-# docs: we should have some
-docs:
+all: $(NAME).so

 $(NAME).so: ${OBJECTS}
 	$(CC) $(EXTRA_CFLAGS) $(LINK_FLAGS) -o $@ ${OBJECTS} $(LIBS)
@@ -77,13 +42,15 @@ $(NAME).so: ${OBJECTS}

 # need some better way of determining this
 DESTDIR=/
-SECDIR ?= ${DESTDIR}/lib/security
+SECDIR=${DESTDIR}/lib/security

 .PHONY: install
 install: $(NAME).so
 	install -m 755 -d $(SECDIR)
-	install -m 755 $(NAME).so $(SECDIR)/
+	install -m 555 $(NAME).so $(SECDIR)/
 	
 .PHONY: clean
-clean:
+clean: ${MAKE_RULES}
 	rm -f core core.* *.so *.o *.s *.a *~
+	rm -f ${NAME}-*.tar.gz Make.rules
+
--- a/changehat/pam_apparmor/get_options.c
+++ b/changehat/pam_apparmor/get_options.c
@@ -1,4 +1,6 @@
 /*
+ * $Id$
+ *
 * Written by Steve Beattie <sbeattie@suse.de> 2006/10/25
 *
 * Modeled after the option parsing code in pam_unix2 by:
--- a/changehat/pam_apparmor/pam_apparmor.c
+++ b/changehat/pam_apparmor/pam_apparmor.c
@@ -5,7 +5,7 @@
 * NOVELL (All rights reserved)
 *
 * Copyright (c) 2010
- * Canonical, Ltd. (All rights reserved)
+ * Canonical, Ltd.(All rights reserved)
 *
 * Written by Jesse Michael <jmichael@suse.de> 2006/08/24
 *	  and Steve Beattie <sbeattie@ubuntu.com> 2006/10/25
@@ -111,7 +111,6 @@ int pam_sm_open_session(pam_handle_t *pamh, int flags,
 					  sizeof(magic_token));
 		if (retval < 0) {
 			pam_syslog(pamh, LOG_ERR, "Can't read from /dev/urandom\n");
-			close(fd);
 			return PAM_PERM_DENIED;
 		}
 	} while ((magic_token == 0) || (retval != sizeof(magic_token)));
@@ -170,6 +169,7 @@ int pam_sm_open_session(pam_handle_t *pamh, int flags,
 			 * stop attempting to use change_hat */
 			goto nodefault;
 			break;
+		case EPERM: /* Disable when ECHILD patch gets accepted */
 		case EACCES:
 		case ENOENT:
 			/* failed to change into attempted hat, so we'll
--- a/changehat/pam_apparmor/pam_apparmor.h
+++ b/changehat/pam_apparmor/pam_apparmor.h
@@ -1,6 +1,8 @@
 /* pam_apparmor module */

 /*
+ * $Id$
+ *
 * Written by Jesse Michael <jmichael@suse.de> 2006/08/24
 *	  and Steve Beattie <sbeattie@suse.de> 2006/10/25
 *
--- a/changehat/pam_apparmor/pam_apparmor.spec.in
+++ b/changehat/pam_apparmor/pam_apparmor.spec.in
@@ -0,0 +1,83 @@
+#
+# spec file for package pam_apparmor (Version 2)
+#
+# Copyright (c) 2005 SUSE LINUX Products GmbH, Nuernberg, Germany.
+# This file and all modifications and additions to the pristine
+# package are under the same license as the package itself.
+#
+# Please submit bugfixes or comments via http://www.suse.de/feedback/
+#
+
+# norootforbuild
+
+Name:         pam_apparmor
+License:      GPL
+Group:        Productivity/Security
+Autoreqprov:  on
+Version:      @@immunix_version@@
+Release:      @@repo_version@@
+Summary:      Pam module to add AppArmor change_hat functionality
+URL:          http://forge.novell.com/modules/xfmod/project/?apparmor
+Source:       pam_apparmor-%{version}-@@repo_version@@.tar.gz
+BuildRoot:    %{_tmppath}/%{name}-%{version}-build
+BuildRequires: pam-devel
+Requires:     pam
+Prereq:       pam
+
+%if %{?suse_version:1}0
+%if 0%{?suse_version} < 1030
+BuildRequires: libapparmor
+%else
+BuildRequires: libapparmor-devel
+%endif
+%else
+BuildRequires: libapparmor-devel
+%endif
+
+%description
+The pam_apparmor module provides the means for any pam applications that
+call pam_open_session() to automatically perform an AppArmor change_hat
+operation in order to switch to a user-specific security policy.
+
+
+Authors:
+--------
+    Jesse Michael jmichael@suse.de
+
+%prep
+%setup -q
+
+%build
+make CFLAGS="${RPM_OPT_FLAGS}"
+
+%install
+[ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT
+make install DESTDIR=${RPM_BUILD_ROOT} SECDIR=${RPM_BUILD_ROOT}/%{_lib}/security
+
+%clean
+[ "${RPM_BUILD_ROOT}" != "/" ] && rm -rf ${RPM_BUILD_ROOT}
+
+%files
+%defattr(444,root,root,755)
+%doc README COPYING
+%attr(555,root,root) /%{_lib}/security/pam_apparmor.so
+
+%changelog -n pam_apparmor
+* Tue Oct 31 2006 Jesse Michael <jmichael@suse.de>
+- Add debug option
+* Tue Oct 31 2006 Steve Beattie <sbeattie@suse.de>
+- Add configuration options to order attempted hat changes
+* Wed Oct 25 2006 Steve Beattie <sbeattie@suse.de>
+- remove auto-editing of pam's common-session
+- honor RPM's CFLAGS when building
+- add license (same as Linux PAM package).
+* Thu Sep 14 2006 Jesse Michael <jmichael@suse.de>
+- header comment was incorrect
+- use pam_get_user() instead of pam_get_item()
+- fix read from urandom if 0
+* Fri Jan 13 2006 Steve Beattie <sbeattie@suse.de>
+- Add svn repo number to tarball
+* Fri Jan 13 2006 Jesse Michael <jmichael@suse.de>
+- Make magic tokens harder to guess by pulling them from /dev/urandom
+* Wed Dec 21 2005 - jmichael@suse.de
+- initial
--- a/changehat/tomcat_apparmor/tomcat_5_0/Makefile
+++ b/changehat/tomcat_apparmor/tomcat_5_0/Makefile
@@ -1,3 +1,4 @@
+# 	$Id$
 # ----------------------------------------------------------------------
 #    Copyright (c) 1999, 2004, 2005, 2006 NOVELL (All rights reserved)
 #
@@ -17,7 +18,13 @@ NAME 		= tomcat_apparmor
 all:
 COMMONDIR=../../../common/

-include $(COMMONDIR)/Make.rules
+include common/Make.rules
+
+COMMONDIR_EXISTS=$(strip $(shell [ -d ${COMMONDIR} ] && echo true))
+ifeq ($(COMMONDIR_EXISTS), true)
+common/Make.rules: $(COMMONDIR)/Make.rules
+	ln -sf $(COMMONDIR) .
+endif

 LIB		= lib
 CATALINA_HOME 	= /usr/share/tomcat5
@@ -28,6 +35,7 @@ all:

 clean:
 	ant clean
+	rm -f tomcat_apparmor.spec ${NAME}-*.tar.gz Make.rules

-install:
-	 ant  -Dversion=$(VERSION) -Drelease=$(MAN_RELEASE) -Dcatalina_home=${CATALINA_HOME} -Dinstall_lib=${LIB} install_jar install_jni
+install: $(SPECFILE)
+	 ant  -Dversion=$(VERSION) -Drelease=$(RELEASE) -Dcatalina_home=${CATALINA_HOME} -Dinstall_lib=${LIB} install_jar install_jni
--- a/changehat/tomcat_apparmor/tomcat_5_0/src/jni_src/JNIChangeHat.c
+++ b/changehat/tomcat_apparmor/tomcat_5_0/src/jni_src/JNIChangeHat.c
@@ -13,7 +13,7 @@

 #include "jni.h"
 #include <errno.h>
-#include <sys/apparmor.h>
+#include "sys/apparmor.h"
 #include "com_novell_apparmor_JNIChangeHat.h"

 /* c intermediate lib call for Java -> JNI -> c library execution of the change_hat call */
--- a/changehat/tomcat_apparmor/tomcat_5_0/tomcat_apparmor.spec.in
+++ b/changehat/tomcat_apparmor/tomcat_5_0/tomcat_apparmor.spec.in
@@ -0,0 +1,86 @@
+# $Id$
+# ----------------------------------------------------------------------
+#    Copyright (c) 2006 NOVELL (All rights reserved)
+#
+#    This program is free software; you can redistribute it and/or
+#    modify it under the terms of version 2 of the GNU General Public
+#    License published by the Free Software Foundation.
+#
+#    This program is distributed in the hope that it will be useful,
+#    but WITHOUT ANY WARRANTY; without even the implied warranty of
+#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#    GNU General Public License for more details.
+#
+#    You should have received a copy of the GNU General Public License
+#    along with this program; if not, contact Novell, Inc.
+# ----------------------------------------------------------------------
+# norootforbuild
+
+# Check first to see if distro is already defined.
+
+%if ! %{?distro:1}0
+  %define distro suse
+%endif
+
+%if %{distro} == "suse"
+%define CATALINA_HOME /usr/share/tomcat5
+%endif 
+%define APPARMOR_DOC_DIR /usr/share/doc/packages/apparmor-docs/
+%define JNI_SO libJNIChangeHat.so
+%define JAR_FILE changeHatValve.jar
+
+
+Summary: Tomcat 5 plugin for AppArmor change_hat
+Name: tomcat_apparmor
+Version: @@immunix_version@@
+Release: @@repo_version@@
+Group:  System/Libraries
+Source0: %{name}-%{version}-@@repo_version@@.tar.gz
+License: LGPL
+BuildRoot: %{?_tmppath:}%{!?_tmppath:/var/tmp}/%{name}-%{version}-build
+Url: http://developer.novell.com/wiki/index.php/Novell_AppArmor
+Prereq: tomcat5, servletapi5, libapparmor
+BuildRequires: tomcat5, servletapi5 ant, java, libapparmor, java2-devel-packages, apparmor-docs
+Provides: tomcat_apparmor
+
+%description
+tomcat_apparmor - is a plugin for Apache Tomcat version 5.x that provides
+support for AppArmor change_hat for creating AppArmor containers that are
+bound to discrete elements of processing within the Tomcat servlet 
+container. The AppArmor containers, or "hats", can be created for invidual
+URL processing or per servlet. 
+
+%prep
+
+%setup -q 
+
+%build
+[ "${RPM_BUILD_ROOT}" != "/" ] && rm -rf ${RPM_BUILD_ROOT}
+
+ant -Ddist=${RPM_BUILD_DIR}/%{name}-%{version} -Dtarget=1.4 jar jni_so
+
+%install
+ant -Ddist=${RPM_BUILD_DIR}/%{name}-%{version} -Dversion=%{version} -Drelease=%{release} -Dcatalina_home=%{CATALINA_HOME} -Dinstall_root=${RPM_BUILD_ROOT} -Dinstall_lib=%{_lib} install_jar install_jni
+
+mkdir -p ${RPM_BUILD_ROOT}%{APPARMOR_DOC_DIR}
+install ${RPM_BUILD_DIR}/%{name}-%{version}/README.tomcat_apparmor  ${RPM_BUILD_ROOT}%{APPARMOR_DOC_DIR}
+
+%clean 
+[ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT
+
+%files
+%defattr(-,root,root)
+%{CATALINA_HOME}/server/lib/%{JAR_FILE}
+/%{_lib}/lib*
+/%{_libdir}/lib*
+%{APPARMOR_DOC_DIR}/README.tomcat_apparmor
+
+%post
+ldconfig 
+
+%postun
+ldconfig 
+
+%changelog
+* Mon Oct 9 2006 - dreynolds@suse.de 
+- Initial package creation.
--- a/changehat/tomcat_apparmor/tomcat_5_5/Makefile
+++ b/changehat/tomcat_apparmor/tomcat_5_5/Makefile
@@ -1,3 +1,4 @@
+# 	$Id$
 # ----------------------------------------------------------------------
 #    Copyright (c) 1999, 2004, 2005, 2006 NOVELL (All rights reserved)
 #
@@ -17,7 +18,13 @@ NAME 		= tomcat_apparmor
 all:
 COMMONDIR=../../../common/

-include $(COMMONDIR)/Make.rules
+include common/Make.rules
+
+COMMONDIR_EXISTS=$(strip $(shell [ -d ${COMMONDIR} ] && echo true))
+ifeq ($(COMMONDIR_EXISTS), true)
+common/Make.rules: $(COMMONDIR)/Make.rules
+	ln -sf $(COMMONDIR) .
+endif

 LIB		= lib
 CATALINA_HOME 	= /usr/share/tomcat55
@@ -28,6 +35,7 @@ all:

 clean:
 	ant clean
+	rm -f tomcat_apparmor.spec ${NAME}-*.tar.gz Make.rules

-install:
-	 ant  -Dversion=$(VERSION) -Drelease=$(MAN_RELEASE) -Dcatalina_home=${CATALINA_HOME} -Dinstall_lib=${LIB} install_jar install_jni
+install: $(SPECFILE)
+	 ant  -Dversion=$(VERSION) -Drelease=$(RELEASE) -Dcatalina_home=${CATALINA_HOME} -Dinstall_lib=${LIB} install_jar install_jni
--- a/changehat/tomcat_apparmor/tomcat_5_5/build.xml
+++ b/changehat/tomcat_apparmor/tomcat_5_5/build.xml
@@ -4,8 +4,8 @@
    <property name="jni_src" location="src/jni_src"/>
    <property name="build" location="build"/>
    <property name="install_root" location="/"/>
-    <property name="catalina_home" location="/usr/share/tomcat6"/>
-    <property name="lib" location="/usr/share/tomcat6/bin"/>
+    <property name="catalina_home" location="/usr/share/tomcat5"/>
+    <property name="lib" location="lib"/>
    <property name="install_lib" value="/lib"/>
    <property name="dist" location="dist"/>
    <property name="jarfile" location="${dist}/${ant.project.name}.jar"/>
@@ -18,11 +18,10 @@
        <include name="**/*.jar"/>
    </fileset>

-    <fileset id="tomcat.jars" dir="${catalina_home}/lib">
+    <fileset id="tomcat.jars" dir="${catalina_home}/server/lib">
 	   <include name="**/*.jar"/>
 	</fileset>
-
-    <fileset id="servlet.jars" dir="${catalina_home}/lib">
+    <fileset id="servlet.jars" dir="${catalina_home}/common/lib">
 	   <include name="**/*.jar"/>
 	</fileset>
 	
@@ -81,9 +80,9 @@
    </target>

    <target name="install_jar" depends="jni_so" description="Install jar file">
-        <mkdir dir="${install_root}/${catalina_home}/lib/"/>
-        <copy file="${jarfile}" tofile="${install_root}/${catalina_home}/lib/${ant.project.name}.jar"/>
-        <chmod perm="644" file="${install_root}/${catalina_home}/lib/${ant.project.name}.jar"/>
+        <mkdir dir="${install_root}/${catalina_home}/server/lib/"/>
+        <copy file="${jarfile}" tofile="${install_root}/${catalina_home}/server/lib/${ant.project.name}.jar"/>
+        <chmod perm="644" file="${install_root}/${catalina_home}/server/lib/${ant.project.name}.jar"/>
    </target>

    <target name="clean" description="Remove build and dist directories">
--- a/changehat/tomcat_apparmor/tomcat_5_5/src/jni_src/JNIChangeHat.c
+++ b/changehat/tomcat_apparmor/tomcat_5_5/src/jni_src/JNIChangeHat.c
@@ -13,7 +13,7 @@

 #include "jni.h"
 #include <errno.h>
-#include <sys/apparmor.h>
+#include "sys/apparmor.h"
 #include "com_novell_apparmor_JNIChangeHat.h"

 /* c intermediate lib call for Java -> JNI -> c library execution of the change_hat call */
--- a/changehat/tomcat_apparmor/tomcat_5_5/src/jni_src/Makefile
+++ b/changehat/tomcat_apparmor/tomcat_5_5/src/jni_src/Makefile
@@ -4,7 +4,7 @@ LIB            = lib/
 LIBDIR         = /usr/${LIB}
 INCLUDE        = ${LIBDIR}/jvm/java/include
 CFLAGS         = -g -O2 -Wall -Wstrict-prototypes -Wl,-soname,$@.${SO_VERS} -pipe  -fpic -D_REENTRANT
-INCLUDES       = -I$(INCLUDE)  -I$(INCLUDE)/linux -I$(TOP)/../../../libraries/libapparmor/src/
+INCLUDES       = -I$(INCLUDE)  -I$(INCLUDE)/linux
 CLASSFILE      = ${CLASSPATH}/com/novell/apparmor/${JAVA_CLASSNAME}.class
 DESTDIR        = ${TOP}/dist
 SO_VERS        = 1
@@ -20,7 +20,7 @@ ${JAVA_CLASSNAME}.java com_novell_apparmor_${JAVA_CLASSNAME}.h:  ${CLASSFILE}
 	javah -jni -classpath ${CLASSPATH} com.novell.apparmor.${JAVA_CLASSNAME} 

 ${TARGET}.so:    ${JAVA_CLASSNAME}.c  ${JAVA_CLASSNAME}.java com_novell_apparmor_${JAVA_CLASSNAME}.h
-	gcc ${INCLUDES} ${CFLAGS} -shared -o ${TARGET}.so  ${JAVA_CLASSNAME}.c -L$(TOP)/../../../libraries/libapparmor/src/.libs -lapparmor
+	gcc ${INCLUDES} ${CFLAGS} -shared -o ${TARGET}.so  ${JAVA_CLASSNAME}.c -lapparmor

 install: ${TARGET}.so
 	install -d $(DESTDIR)/${LIB} $(DESTDIR)${LIBDIR}
--- a/changehat/tomcat_apparmor/tomcat_5_5/tomcat_apparmor.spec.in
+++ b/changehat/tomcat_apparmor/tomcat_5_5/tomcat_apparmor.spec.in
@@ -0,0 +1,87 @@
+# $Id$
+# ----------------------------------------------------------------------
+#    Copyright (c) 2006 NOVELL (All rights reserved)
+#
+#    This program is free software; you can redistribute it and/or
+#    modify it under the terms of version 2 of the GNU General Public
+#    License published by the Free Software Foundation.
+#
+#    This program is distributed in the hope that it will be useful,
+#    but WITHOUT ANY WARRANTY; without even the implied warranty of
+#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#    GNU General Public License for more details.
+#
+#    You should have received a copy of the GNU General Public License
+#    along with this program; if not, contact Novell, Inc.
+# ----------------------------------------------------------------------
+# norootforbuild
+
+# Check first to see if distro is already defined.
+
+%if ! %{?distro:1}0
+  %define distro suse
+%endif
+
+%if %{distro} == "suse"
+%define CATALINA_HOME /usr/share/tomcat55
+%endif 
+%define APPARMOR_DOC_DIR /usr/share/doc/packages/apparmor-docs/
+%define JNI_SO libJNIChangeHat.so
+%define JAR_FILE changeHatValve.jar
+
+
+Summary: Tomcat 5 plugin for AppArmor change_hat
+Name: tomcat_apparmor
+Version: @@immunix_version@@
+Release: @@repo_version@@
+Group:  System/Libraries
+Source0: %{name}-%{version}-@@repo_version@@.tar.gz
+License: LGPL
+BuildRoot: %{?_tmppath:}%{!?_tmppath:/var/tmp}/%{name}-%{version}-build
+Url: http://developer.novell.com/wiki/index.php/Novell_AppArmor
+Prereq: tomcat55, servletapi5
+BuildRequires: tomcat55, servletapi5, ant, java, libapparmor-devel, java2-devel-packages, apparmor-docs
+
+%description
+tomcat_apparmor - is a plugin for Apache Tomcat version 5.x that provides
+support for AppArmor change_hat for creating AppArmor containers that are
+bound to discrete elements of processing within the Tomcat servlet 
+container. The AppArmor containers, or "hats", can be created for invidual
+URL processing or per servlet. 
+
+%prep
+
+%setup -q 
+
+%build
+[ "${RPM_BUILD_ROOT}" != "/" ] && rm -rf ${RPM_BUILD_ROOT}
+
+ant -Dinstall_lib=%{_lib} -Dcatalina_home=%{CATALINA_HOME} -Ddist=${RPM_BUILD_DIR}/%{name}-%{version} -Dtarget=1.4 jar jni_so
+
+%install
+ant -Ddist=${RPM_BUILD_DIR}/%{name}-%{version} -Dversion=%{version} -Drelease=%{release} -Dcatalina_home=%{CATALINA_HOME} -Dinstall_root=${RPM_BUILD_ROOT} -Dinstall_lib=%{_lib} install_jar install_jni
+
+mkdir -p ${RPM_BUILD_ROOT}%{APPARMOR_DOC_DIR}
+install ${RPM_BUILD_DIR}/%{name}-%{version}/README.tomcat_apparmor  ${RPM_BUILD_ROOT}%{APPARMOR_DOC_DIR}
+
+%clean 
+[ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT
+
+%files
+%defattr(-,root,root)
+%{CATALINA_HOME}/server/lib/%{JAR_FILE}
+/%{_lib}/lib*
+/%{_libdir}/lib*
+doc %attr(0644,root,root) %{APPARMOR_DOC_DIR}/README.tomcat_apparmor
+
+%post
+ldconfig 
+
+%postun
+ldconfig 
+
+%changelog
+* Mon Jul 20 2007 - sbeattie@suse.de
+- Convert builddep on libapparmor to libapparmor-devel
+* Mon Oct 9 2006 - dreynolds@suse.de 
+- Initial package creation.
--- a/common/Make-po.rules
+++ b/common/Make-po.rules
@@ -1,19 +1,12 @@
+# 	$Id$
 # ------------------------------------------------------------------
 #
-# Copyright (c) 1999-2008 NOVELL (All rights reserved)
-# Copyright 2009-2015 Canonical Ltd.
+#    Copyright (C) 2002-2005 Novell/SUSE
 #
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of version 2 of the GNU General Public 
-# License published by the Free Software Foundation.
+#    This program is free software; you can redistribute it and/or
+#    modify it under the terms of version 2 of the GNU General Public 
+#    License published by the Free Software Foundation.
 #
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
 # ------------------------------------------------------------------
 #
 # The including makefile needs to define LANG, which lists the lang
@@ -21,14 +14,13 @@
 # exist
 LOCALEDIR=/usr/share/locale

-XGETTEXT_ARGS=--copyright-holder="Canonical Ltd" --msgid-bugs-address=apparmor@lists.ubuntu.com -d ${NAME}
+XGETTEXT_ARGS=--copyright-holder="NOVELL, Inc." --msgid-bugs-address=apparmor-general@forge.novell.com -d ${NAME}

 # When making the .pot file, it's expected that the parent Makefile will
 # pass in the list of sources in the SOURCES variable
 PARENT_SOURCES=$(foreach source, ${SOURCES}, ../${source})

-# Can override by passing LANGS=whatever here
-LANGS?=$(patsubst %.po, %, $(wildcard *.po))
+LANGS=$(patsubst %.po, %, $(wildcard *.po))
 TARGET_MOS=$(foreach lang, $(filter-out $(DISABLED_LANGS),$(LANGS)), ${lang}.mo)

 .PHONY: all
--- a/common/Make.rules
+++ b/common/Make.rules
@@ -1,7 +1,7 @@
+# $Id$
 # ------------------------------------------------------------------
 #
 #    Copyright (C) 2002-2005 Novell/SUSE
-#    Copyright (C) 2010-2015 Canonical, Ltd.
 #
 #    This program is free software; you can redistribute it and/or
 #    modify it under the terms of version 2 of the GNU General Public 
@@ -15,99 +15,170 @@
 #    You should have received a copy of the GNU General Public License
 #    along with this program; if not, contact Novell, Inc.
 # ------------------------------------------------------------------
-# Make.rules - common make targets and variables for building AppArmor
+# Make.rules - common make targets and variables for building the SHASS
+# product.
 #
 # NOTES:
-#   Before including this file in your Makefile, you should
-#   - define COMMONDIR (the location of the common/ directory)
-#   - define the default rule (usually 'all:'). (Note: you can redefine
-#     it later in your Makefile)
-
-.PHONY: common_Make.rules_is_a_bad_target
-common_Make.rules_is_a_bad_target:
-	@echo "*** default target in common/Make.rules hit - either you did something strange, or something is broken... ***"
-	exit 1
+#   - must define the package NAME before including this file.
+#   - After checking in to cvs, you'll need to delele the hardlinked
+#     Make.rules files that already exist in the individual application
+#     directories

 DISTRIBUTION=AppArmor
-VERSION=$(shell cat $(COMMONDIR)/Version)
+VERSION=2.5.1

-# Convenience functions
-pathsearch = $(firstword $(wildcard $(addsuffix /$(1),$(subst :, ,$(PATH)))))
-map = $(foreach a,$(2),$(call $(1),$(a)))
+# OVERRIDABLE variables
+# Set these variables before including Make.rules to change its behavior
+#   SPECFILE - for packages that have a non-standard specfile name
+#   EXTERNAL_PACKAGE - for packages that have upstream versions that
+#   	we're locally modifying (e.g. imnxcerttool/gnutls).
+#
+# use 'make BUILDIR=/some/where/else/' to override the /usr/src/redhat
+# location -- it *should* pick out the right thing to do based on the
+# .rpmmacros file, but you can still use BUILDDIR to override that.
+TESTBUILDDIR=$(shell [ -f ${HOME}/.rpmmacros ] && awk '/^%_topdir/ {print $$2}' ${HOME}/.rpmmacros)
+ifndef BUILDDIR
+BUILDDIR=$(shell if [ -d "${TESTBUILDDIR}" ] ; then \
+		    echo ${TESTBUILDDIR} | sed "s^/$$^^" ; \
+		  elif [ -d "/usr/src/redhat" ] ; then \
+		    echo "/usr/src/redhat" ; \
+		  elif [ -d "/usr/src/packages" ] ; then \
+		    echo "/usr/src/packages" ; \
+		  else \
+		    echo "/tmp/${NAME}"  ; \
+		  fi ;)
+endif
+RPMHOSTVENDOR=$(shell which rpm > /dev/null && rpm --eval "%{_host_vendor}")
+ifndef DISTRO
+DISTRO=$(shell if [ -f /etc/slackware-version ] ; then \
+		  echo slackware ; \
+	       elif [ -f /etc/debian_version ] ; then \
+	       	  echo debian ;\
+	       elif [ "${RPMHOSTVENDOR}" = "suse" ] ; then \
+	          echo suse ;\
+	       elif [ "${RPMHOSTVENDOR}" = "redhat" ] ; then \
+	          echo rhel4 ;\
+	       else \
+	          echo unknown ;\
+	       fi)
+endif
+RPMARG=--define "_topdir $(BUILDDIR:/=)" \
+        --define "vendor NOVELL, Inc." \
+	--define "distribution ${DISTRIBUTION}" \
+	--define "debug_package %{nil}" \
+	--define "immunix_version ${VERSION}" \
+	$(shell [ -d ${BUILDDIR}/BUILDROOT ] && echo --define \"buildroot $(BUILDDIR:/=)/BUILDROOT\") \
+	$(shell [ -n "${DISTRO}" ] && echo --define \"distro ${DISTRO}\")

-AWK:=$(shell which awk)
-ifndef AWK
-$(error awk utility required for build but not available)
+#REPO_VERSION=$(shell if [ -x /usr/bin/svn ] ; then \
+#			if ! /usr/bin/svn info -r HEAD . 2> /dev/null | grep "^Last Changed Rev:" | sed "s/^Last Changed Rev: //" ; then \
+#				/usr/bin/svn info . 2> /dev/null | grep "^Last Changed Rev:" | sed "s/^Last Changed Rev: //" ; \
+#			fi ; \
+#		      fi)
+REPO_VERSION=$(shell if [ -x /usr/bin/bzr ] ; then \
+				(/usr/bin/bzr version-info . 2> /dev/null || echo revno: 1) | awk '/^revno:/ { print $$2 }' ; \
+		      else echo 1; \
+		      fi)
+#REPO_URL=$(shell if [ -x /usr/bin/svn ] ; then \
+#			/usr/bin/svn info . 2> /dev/null | grep "^URL:" | sed "s/^URL: //" ; \
+#		 fi)
+#COMMON_REPO_URL=$(shell if [ -x /usr/bin/svn ] ; then \
+#			/usr/bin/svn info $(COMMONDIR)  2> /dev/null | grep "^URL:" | sed "s/^URL: //" ; \
+#		 fi)
+
+ifdef EXTERNAL_PACKAGE
+RPMARG+=--define "_sourcedir $(shell pwd)"
 endif

-define nl
+ifndef SPECFILE
+SPECFILE        = $(NAME).spec
+endif
+RELEASE = $(shell rpm -q --specfile --define "_sourcedir ." ${RPMARG} --qf "%{RELEASE}" ${SPECFILE})
+RELEASE_DIR	= $(NAME)-$(VERSION)
+TARBALL		= $(NAME)-$(VERSION)-${REPO_VERSION}.tar.gz
+TAR		= /bin/tar czvp -h --exclude .svn --exclude CVS --exclude .cvsignore --exclude ${TARBALL} --exclude ${RELEASE_DIR}/${RELEASE_DIR}  $(shell test -f ${NAME}.exclude && echo "-X ${NAME}.exclude")
+LDCONFIG	= /sbin/ldconfig

-endef
+CVSPKG_VERSION=$(shell rpm -q --specfile --define "_sourcedir ." ${RPMARG} ${SPECFILE} | head -1 | tr "." "_")

-REPO_VERSION_CMD=[ -x /usr/bin/git ] && /usr/bin/git describe --tags --long --abbrev=16 --match 'v*' 2> /dev/null || awk '{ print $2 }' common/.stamp_rev
+RPMSUBDIRS=SOURCES SPECS BUILD BUILDROOT SRPMS RPMS/i386 RPMS/i586 \
+        RPMS/i686 RPMS/athlon RPMS/noarch RPMS/x86_64
+BUILDRPMSUBDIRS=$(foreach subdir, $(RPMSUBDIRS), $(BUILDDIR:/=)/$(subdir))

-ifndef PYTHON_VERSIONS
-PYTHON_VERSIONS = $(call map, pathsearch, python2 python3)
+.PHONY: cvs_tag
+cvs_tag:
+	cvs tag IMMUNIX-${CVSPKG_VERSION}
+
+.PHONY: checkin
+checkin:
+	if cvs -q up -d | grep -q "^\?" ; then echo "Hey! You have" \
+		"files in the directory you have not added into cvs."; exit 1; \
+	fi
+	cvs ci
+	make cvs_tag
+
+ifdef EXTERNAL_PACKAGE
+.PHONY: rpm
+rpm: clean $(BUILDRPMSUBDIRS)
+	rpmbuild -ba ${RPMARG} ${SPECFILE}
+
+else
+.PHONY: rpm
+rpm: clean $(TARBALL) $(BUILDRPMSUBDIRS)
+	cp $(TARBALL) $(BUILDDIR)/SOURCES/
+	cp ${SPECFILE} $(BUILDDIR)/SPECS/
+	rpmbuild -ba ${RPMARG} ${SPECFILE}
+
+.PHONY: ${SPECFILE}
+${SPECFILE}: ${SPECFILE}.in
+	sed -e "s/@@immunix_version@@/${VERSION}/g" \
+	    -e "s/@@repo_version@@/${REPO_VERSION}/g" $< > $@
+
+${TARBALL}: clean ${SPECFILE}
+	-rm -rf $(RELEASE_DIR)
+	mkdir $(RELEASE_DIR)
+	$(TAR) . | tar xz -C $(RELEASE_DIR)
+	$(TAR) -f $@ $(RELEASE_DIR)
+	rm -rf $(RELEASE_DIR)
+
+ifndef OVERRIDE_TARBALL
+.PHONY: tarball
+tarball: clean $(TARBALL)
 endif

-ifndef PYTHON
-PYTHON = $(firstword ${PYTHON_VERSIONS})
-endif
+.PHONY: dist
+dist: clean $(SPECFILE)
+	-rm -rf $(RELEASE_DIR)
+	svn export -r $(REPO_VERSION) $(REPO_URL) $(RELEASE_DIR)
+	svn export $(COMMON_REPO_URL) $(RELEASE_DIR)/common
+	make -C $(RELEASE_DIR) $(SPECFILE) REPO_VERSION=${REPO_VERSION} COMMONDIR_EXISTS=false
+	$(TAR) -f $(TARBALL) $(RELEASE_DIR)
+	rm -rf $(RELEASE_DIR)

-#Helper function to be used with $(call pyalldo, run_test_with_all.py)
-pyalldo=set -e; $(foreach py, $(PYTHON_VERSIONS), $(py) $(1);)
+endif

 .PHONY: version
 .SILENT: version
 version:
-	echo $(VERSION)
+	 rpm -q --define "_sourcedir ." ${RPMARG} --specfile ${SPECFILE}

 .PHONY: repo_version
 .SILENT: repo_version
 repo_version:
-	echo $(shell $(value REPO_VERSION_CMD))
+	 echo $(REPO_VERSION)

-.PHONY: pod_clean
-ifndef VERBOSE
-.SILENT: pod_clean
-endif
-pod_clean:
+.PHONY: build_dir 
+build_dir: $(BUILDRPMSUBDIRS)
+
+$(BUILDRPMSUBDIRS):
+	mkdir -p $(BUILDRPMSUBDIRS)
+
+.PHONY: _clean
+.SILENT: _clean
+_clean:
+	-rm -f ${NAME}-${VERSION}-*.tar.gz
 	-rm -f ${MANPAGES} *.[0-9].gz ${HTMLMANPAGES} pod2htm*.tmp

-# =====================
-# generate list of capabilities based on
-# /usr/include/linux/capabilities.h for use in multiple locations in
-# the source tree
-# =====================
-
-# emits defined capabilities in a simple list, e.g. "CAP_NAME CAP_NAME2"
-CAPABILITIES=$(shell echo "\#include <linux/capability.h>" | cpp -dM | LC_ALL=C sed -n -e '/CAP_EMPTY_SET/d' -e 's/^\#define[ \t]\+CAP_\([A-Z0-9_]\+\)[ \t]\+\([0-9xa-f]\+\)\(.*\)$$/CAP_\1/p' | LC_ALL=C sort)
-
-.PHONY: list_capabilities
-list_capabilities: /usr/include/linux/capability.h
-	@echo "$(CAPABILITIES)"
-
-# =====================
-# generate list of network protocols based on
-# sys/socket.h for use in multiple locations in
-# the source tree
-# =====================
-
-# These are the families that it doesn't make sense for apparmor
-# to mediate. We use PF_ here since that is what is required in
-# bits/socket.h, but we will rewrite these as AF_.
-
-FILTER_FAMILIES=PF_UNIX
-
-__FILTER=$(shell echo $(strip $(FILTER_FAMILIES)) | sed -e 's/ /\\\|/g')
-
-# emits the AF names in a "AF_NAME NUMBER," pattern
-AF_NAMES=$(shell echo "\#include <sys/socket.h>" | cpp -dM | LC_ALL=C sed -n -e '/$(__FILTER)/d' -e 's/PF_LOCAL/PF_UNIX/' -e 's/^\#define[ \t]\+PF_\([A-Z0-9_]\+\)[ \t]\+\([0-9]\+\).*$$/AF_\1 \2,/p' | sort -n -k2)
-
-.PHONY: list_af_names
-list_af_names:
-	@echo "$(AF_NAMES)"
-
 # =====================
 # manpages
 # =====================
@@ -126,12 +197,32 @@ install_manpages: $(MANPAGES)
 	$(foreach dir, ${MANDIRS}, \
 	     install -d ${DESTDIR}/${MANDIR}/man${dir} ; \
 	     install -m 644 $(filter %.${dir}, ${MANPAGES}) ${DESTDIR}/${MANDIR}/man${dir}; \
-	)
+	     $(foreach aa_page, $(filter %.${dir}, ${AA_MANPAGES}), \
+	     	ln -sf $(aa_page) ${DESTDIR}/${MANDIR}/man${dir}/${aa_page:%=aa-%};))

-MAN_RELEASE="AppArmor ${VERSION}"
+%.1: %.pod
+	$(POD2MAN) $< --release=NOVELL/SUSE --center=AppArmor --section=1 > $@

-%.1 %.2 %.3 %.4 %.5 %.6 %.7 %.8: %.pod
-	$(POD2MAN) $< --release=$(MAN_RELEASE) --center=AppArmor --stderr --section=$(subst .,,$(suffix $@)) > $@
+%.2: %.pod
+	$(POD2MAN) $< --release=NOVELL/SUSE --center=AppArmor --section=2 > $@
+
+%.3: %.pod
+	$(POD2MAN) $< --release=NOVELL/SUSE --center=AppArmor --section=3 > $@
+
+%.4: %.pod
+	$(POD2MAN) $< --release=NOVELL/SUSE --center=AppArmor --section=4 > $@
+
+%.5: %.pod
+	$(POD2MAN) $< --release=NOVELL/SUSE --center=AppArmor --section=5 > $@
+
+%.6: %.pod
+	$(POD2MAN) $< --release=NOVELL/SUSE --center=AppArmor --section=6 > $@
+
+%.7: %.pod
+	$(POD2MAN) $< --release=NOVELL/SUSE --center=AppArmor --section=7 > $@
+
+%.8: %.pod
+	$(POD2MAN) $< --release=NOVELL/SUSE --center=AppArmor --section=8 > $@

 %.1.html: %.pod
 	$(POD2HTML) --header --css apparmor.css --infile=$< --outfile=$@
@@ -157,6 +248,43 @@ MAN_RELEASE="AppArmor ${VERSION}"
 %.8.html: %.pod
 	$(POD2HTML) --header --css apparmor.css --infile=$< --outfile=$@

+# =====================
+# Slackware poo
+# =====================
+.PHONY: slack
+slack: 
+	rm -rf ${BUILDDIR}
+	mkdir -p ${BUILDDIR}/install
+	make install DESTDIR=${BUILDDIR} DISTRO=slackware
+	# comment line is there so grep always has something to match
+	( echo "# install script pulled from ${SPECFILE}" ; rpm -q --specfile --define "_sourcedir ." ${RPMARG} --qf "%{POSTIN}\n" ${SPECFILE}) | grep -v "^(none)$$" >> ${BUILDDIR}/install/doinst.sh
+	( cd ${BUILDDIR} && makepkg -l y -c y -p ${PWD}/${NAME}-${VERSION}-${RELEASE}.tgz )
+
+# =====================
+# Debian poo
+# =====================
+.PHONY: deb
+deb: ${TARBALL}
+	rm -rf ${BUILDDIR}
+	mkdir -p ${BUILDDIR}
+	tar -xvzf ${TARBALL} -C ${BUILDDIR} 
+	( cd ${BUILDDIR}/${RELEASE_DIR} && sh -c "DEBFULLNAME='NOVELL, Inc' dh_make -e apparmor-general@forge.novell.com --library -f ~/svn/immunix/immunix/libimmunix/libimmunix-2.0.tar.gz << EOM \
+\
+EOM" )
+	make ${NAME}-deb -C ${BUILDDIR}/${RELEASE_DIR}
+	# ( cd ${BUILDDIR}/${RELEASE_DIR} && dpkg-buildpackage -b -sd -rfakeroot)
+
+DEBIAN_DISTRO=stable
+
+DEB_CHANGELOG_OUTPUT="${NAME} (${VERSION}-${RELEASE}) ${DEBIAN_DISTRO}; urgency=low\n\
+    \n   * Automatically generated by the AppArmor Build System.\n\
+    \n -- AppArmor Development Team <apparmor-general@forge.novell.com> $(shell date -R)"
+
+
+.PHONY: debian/changelog
+debian/changelog: 
+	echo -e ${DEB_CHANGELOG_OUTPUT} > $@ 
+
 A2PS_ARGS=-Ec -g --line-numbers=1
 ENSCRIPT_ARGS=-C -2jGr -f Courier6 -E
 %.c.ps: %.c
@@ -165,7 +293,3 @@ ENSCRIPT_ARGS=-C -2jGr -f Courier6 -E

 %.pm.ps: %.pm
 	enscript ${ENSCRIPT_ARGS} -o $@ $<
-
-.PHONY: check_pod_files
-check_pod_files:
-	LANG=C podchecker -warning -warning *.pod
--- a/common/Version
+++ b/common/Version
@@ -1 +0,0 @@
-2.13.2
--- a/deprecated/management/apparmor-dbus/AUTHORS
+++ b/deprecated/management/apparmor-dbus/AUTHORS
@@ -0,0 +1 @@
+Matt Barringer <mbarringer@suse.de>
--- a/deprecated/management/apparmor-dbus/COPYING
+++ b/deprecated/management/apparmor-dbus/COPYING
@@ -0,0 +1,340 @@
+		    GNU GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+                       59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+			    Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+		    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+			    NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+		     END OF TERMS AND CONDITIONS
+
+	    How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+    Gnomovision version 69, Copyright (C) year name of author
+    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+  `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+  <signature of Ty Coon>, 1 April 1989
+  Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs.  If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library.  If this is what you want to do, use the GNU Library General
+Public License instead of this License.
--- a/libraries/libapparmor/testsuite/test_multi/change_onexec_lp1648143.err
+++ b/libraries/libapparmor/testsuite/test_multi/change_onexec_lp1648143.err
--- a/deprecated/management/apparmor-dbus/INSTALL
+++ b/deprecated/management/apparmor-dbus/INSTALL
@@ -0,0 +1,167 @@
+Basic Installation
+==================
+
+   These are generic installation instructions.
+
+   The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions.  Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, a file
+`config.cache' that saves the results of its tests to speed up
+reconfiguring, and a file `config.log' containing compiler output
+(useful mainly for debugging `configure').
+
+   If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release.  If at some point `config.cache'
+contains results you don't want to keep, you may remove or edit it.
+
+   The file `configure.in' is used to create `configure' by a program
+called `autoconf'.  You only need `configure.in' if you want to change
+it or regenerate `configure' using a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+  1. `cd' to the directory containing the package's source code and type
+     `./configure' to configure the package for your system.  If you're
+     using `csh' on an old version of System V, you might need to type
+     `sh ./configure' instead to prevent `csh' from trying to execute
+     `configure' itself.
+
+     Running `configure' takes a while.  While running, it prints some
+     messages telling which features it is checking for.
+
+  2. Type `make' to compile the package.
+
+  3. Type `make install' to install the programs and any data files and
+     documentation.
+
+  4. You can remove the program binaries and object files from the
+     source code directory by typing `make clean'.  
+
+Compilers and Options
+=====================
+
+   Some systems require unusual options for compilation or linking that
+the `configure' script does not know about.  You can give `configure'
+initial values for variables by setting them in the environment.  Using
+a Bourne-compatible shell, you can do that on the command line like
+this:
+     CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
+
+Or on systems that have the `env' program, you can do it like this:
+     env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
+
+Compiling For Multiple Architectures
+====================================
+
+   You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'.  `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script.  `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+   If you have to use a `make' that does not supports the `VPATH'
+variable, you have to compile the package for one architecture at a time
+in the source code directory.  After you have installed the package for
+one architecture, use `make distclean' before reconfiguring for another
+architecture.
+
+Installation Names
+==================
+
+   By default, `make install' will install the package's files in
+`/usr/local/bin', `/usr/local/man', etc.  You can specify an
+installation prefix other than `/usr/local' by giving `configure' the
+option `--prefix=PATH'.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+give `configure' the option `--exec-prefix=PATH', the package will use
+PATH as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+   Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System).  The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+   For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+   There may be some features `configure' can not figure out
+automatically, but needs to determine by the type of host the package
+will run on.  Usually `configure' can figure that out, but if it prints
+a message saying it can not guess the host type, give it the
+`--host=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name with three fields:
+     CPU-COMPANY-SYSTEM
+
+See the file `config.sub' for the possible values of each field.  If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the host type.
+
+   If you are building compiler tools for cross-compiling, you can also
+use the `--target=TYPE' option to select the type of system they will
+produce code for and the `--build=TYPE' option to select the type of
+system on which you are compiling the package.
+
+Sharing Defaults
+================
+
+   If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists.  Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Operation Controls
+==================
+
+   `configure' recognizes the following options to control how it
+operates.
+
+`--cache-file=FILE'
+     Use and save the results of the tests in FILE instead of
+     `./config.cache'.  Set FILE to `/dev/null' to disable caching, for
+     debugging `configure'.
+
+`--help'
+     Print a summary of the options to `configure', and exit.
+
+`--quiet'
+`--silent'
+`-q'
+     Do not print messages saying which checks are being made.
+
+`--srcdir=DIR'
+     Look for the package's source code in directory DIR.  Usually
+     `configure' can determine that directory automatically.
+
+`--version'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`configure' also accepts some other, not widely useful, options.
+
--- a/deprecated/management/apparmor-dbus/Makefile.am
+++ b/deprecated/management/apparmor-dbus/Makefile.am
@@ -0,0 +1,5 @@
+# not a GNU package. You can remove this line, if
+# have all needed files, that a GNU package needs
+AUTOMAKE_OPTIONS = foreign 1.4
+
+SUBDIRS = src
--- a/libraries/libapparmor/testsuite/test_multi/file_chown.err
+++ b/libraries/libapparmor/testsuite/test_multi/file_chown.err
--- a/deprecated/management/apparmor-dbus/README
+++ b/deprecated/management/apparmor-dbus/README
@@ -0,0 +1,8 @@
+In order to actually use aadbus, you need to tell auditd to use it as a dispatcher.  It's simple:
+
+* As root, edit /etc/auditd.conf
+
+* Add the following line (using the correct path, of course):
+	dispatcher=/usr/local/bin/apparmor-dbus
+
+* Restart auditd
--- a/libraries/libapparmor/testsuite/test_multi/file_inherit_network_lp1509030.err
+++ b/libraries/libapparmor/testsuite/test_multi/file_inherit_network_lp1509030.err
--- a/deprecated/management/apparmor-dbus/apparmor-dbus.spec
+++ b/deprecated/management/apparmor-dbus/apparmor-dbus.spec
@@ -0,0 +1,43 @@
+#
+# spec file for package apparmor-dbus
+#
+# norootforbuild
+
+Name:		apparmor-dbus
+BuildRequires:	audit-devel dbus-1-devel pkgconfig libapparmor-devel
+Requires:	libapparmor
+Version:	2.3
+Release:	0
+License:	GPL
+Group:		System/Management
+BuildRoot:	%{_tmppath}/%{name}-%{version}-build
+Source0:	%{name}-%{version}.tar.bz2
+
+Summary:	-
+
+%description
+-
+
+%prep
+%setup -n %{name}-%{version}
+%build
+autoreconf --force --install
+export CFLAGS="$RPM_OPT_FLAGS"
+%{?suse_update_config:%{suse_update_config -f}}
+./configure --prefix=%{_prefix}
+make
+
+%install
+rm -rf %{buildroot}
+%makeinstall
+
+%clean
+rm -rf %{buildroot}
+
+%files
+%defattr(-, root, root)
+%{_prefix}/bin/apparmor-dbus
+
+%changelog
+* Thu Sep 13 2007 - sbeattie@suse.de
+- Bump to revision 1.2
--- a/deprecated/management/apparmor-dbus/autogen.sh
+++ b/deprecated/management/apparmor-dbus/autogen.sh
@@ -0,0 +1,31 @@
+#!/bin/sh
+
+DIE=0
+
+(autoconf --version) < /dev/null > /dev/null 2>&1 || {
+        echo
+        echo "You must have autoconf installed to compile $package."
+        echo "Download the appropriate package for your distribution,"
+        echo "or get the source tarball at ftp://ftp.gnu.org/pub/gnu/"
+        DIE=1
+}
+
+(automake --version) < /dev/null > /dev/null 2>&1 || {
+        echo
+        echo "You must have automake installed to compile $package."
+	echo "Download the appropriate package for your system,"
+	echo "or get the source from one of the GNU ftp sites"
+	echo "listed in http://www.gnu.org/order/ftp.html"
+        DIE=1
+}
+
+if test "$DIE" -eq 1; then
+        exit 1
+fi
+
+echo "Running aclocal"
+aclocal
+echo "Running autoconf"
+autoconf --force
+echo "Running automake -ac"
+automake -ac
--- a/deprecated/management/apparmor-dbus/configure.in
+++ b/deprecated/management/apparmor-dbus/configure.in
@@ -0,0 +1,16 @@
+AC_INIT(configure.in)
+
+AM_INIT_AUTOMAKE(apparmor-dbus, 2.3)
+
+AC_LANG_C
+AC_PROG_CC
+
+AC_CHECK_HEADERS(libaudit.h,,AC_MSG_ERROR([libaudit header file not found!]))
+AC_CHECK_LIB(audit, audit_open)
+AC_CHECK_HEADERS(aalogparse/aalogparse.h)
+AC_CHECK_LIB(apparmor, parse_record)
+PKG_CHECK_MODULES(DBUS, dbus-1 >= 0.60)
+CFLAGS="${CFLAGS} ${DBUS_CFLAGS}"
+AC_CHECK_LIB(dbus-1, exit,,AC_MSG_ERROR([dbus-1 not found!]))
+
+AC_OUTPUT(Makefile src/Makefile)
--- a/deprecated/management/apparmor-dbus/src/Makefile.am
+++ b/deprecated/management/apparmor-dbus/src/Makefile.am
@@ -0,0 +1,2 @@
+bin_PROGRAMS = apparmor-dbus
+apparmor_dbus_SOURCES = aadbus.c
--- a/deprecated/management/apparmor-dbus/src/aadbus.c
+++ b/deprecated/management/apparmor-dbus/src/aadbus.c
@@ -0,0 +1,322 @@
+#define DBUS_API_SUBJECT_TO_CHANGE
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/uio.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <signal.h>
+#include <fcntl.h>
+#include <errno.h>
+#include <string.h>
+#include <locale.h>
+#include <libaudit.h>
+#include <dbus/dbus.h>
+#include <aalogparse/aalogparse.h>
+
+#define NULLSPACE(x) (x == NULL) ? &empty_string : &x
+#define NULLSTRLEN(x) (x == NULL) ? 1 : (strlen(x) + 1)
+
+// Local data
+static volatile int signaled = 0;
+static int pipe_fd;
+
+// Local functions
+static int event_loop(void);
+static int is_reject(char *data);
+
+// SIGTERM handler
+static void term_handler( int sig )
+{
+	signaled = 1;
+}
+
+
+/*
+ * main is started by auditd. See dispatcher in auditd.conf
+ */
+int main(int argc, char *argv[])
+{
+	struct sigaction sa;
+	
+	setlocale (LC_ALL, "");
+	
+#ifndef DEBUG
+/*	Make sure we are root */
+	if (getuid() != 0) {
+		printf("You must be root to run this program.\n");
+		return 4;
+	}
+#endif
+
+	// register sighandlers
+	sa.sa_flags = 0 ;
+	sa.sa_handler = term_handler;
+	sigemptyset( &sa.sa_mask ) ;
+	sigaction( SIGTERM, &sa, NULL );
+	sa.sa_handler = term_handler;
+	sigemptyset( &sa.sa_mask ) ;
+	sigaction( SIGCHLD, &sa, NULL );
+	sa.sa_handler = SIG_IGN;
+	sigaction( SIGHUP, &sa, NULL );
+	(void)chdir("/");
+
+	// change over to pipe_fd
+	pipe_fd = dup(0);
+	close(0);
+	open("/dev/null", O_RDONLY);
+	fcntl(pipe_fd, F_SETFD, FD_CLOEXEC);
+
+	// Start the program
+	return event_loop();
+}
+
+/* This function is needed for "old" messages which lumped
+ * everything together under one audit ID.
+ */
+static int is_reject (char *data)
+{
+	int ret = -1;
+	/* Look for the first space */
+	char *start = strchr(data, ' ');
+	if ((start != NULL) && (strlen(start) > 9))
+	{
+		if (strncmp(start + 1, "REJECTING", 9) == 0)
+		{
+			ret = 0;
+		}
+	}
+
+	return ret;
+}
+
+static int event_loop(void)
+{
+	void* data;
+	char *empty_string = " "; /* This is a quick way to indicate a 'null' value in our DBUS message */
+
+	struct iovec vec[2];
+	struct audit_dispatcher_header hdr;
+
+	DBusError		error;		/* Error, if any */
+	DBusMessage		*message;	/* Message to send */
+	static DBusConnection	*con = NULL;	/* Connection to DBUS server */
+	DBusMessageIter		iter, 		/* The main message iterator */
+				profileIter,
+				nameIter,
+				name2Iter,
+				parentIter,
+				activeIter,
+				dataIter;
+
+	char *line = NULL, *parsable_line = NULL;
+	int real_data_size;
+	aa_log_record *record;
+	int is_rejection = 0;
+
+	if (con && !dbus_connection_get_is_connected(con))
+	{
+		dbus_connection_unref(con);
+		con = NULL;
+	}
+	
+	if (!con)
+	{
+		dbus_error_init(&error);
+		con = dbus_bus_get(DBUS_BUS_SYSTEM, &error);
+		if (!con)
+		{
+			dbus_error_free(&error);
+			return 1;
+		}
+	}
+
+
+ 	//message = dbus_message_new_signal("/com/Novell/AppArmor","com.novell.apparmor", "Reject");
+
+	/* allocate data structures */
+	data = malloc(MAX_AUDIT_MESSAGE_LENGTH);
+	if (data == NULL) 
+	{
+		printf("Cannot allocate buffer\n");
+		return 1;
+	}
+
+	memset(data, 0, MAX_AUDIT_MESSAGE_LENGTH);
+	memset(&hdr, 0, sizeof(hdr));
+	do
+	{
+		int rc;
+		parsable_line = NULL;
+		is_rejection = 0;
+		struct timeval tv;
+		fd_set fd;
+		tv.tv_sec = 1;
+		tv.tv_usec = 0;
+		FD_ZERO(&fd);
+		FD_SET(pipe_fd, &fd);
+		rc = select(pipe_fd+1, &fd, NULL, NULL, &tv);
+		if (rc == 0) 
+			continue;
+		 else if (rc == -1)
+			break;
+
+		/* Get header first. it is fixed size */
+		vec[0].iov_base = (void*)&hdr;
+		vec[0].iov_len = sizeof(hdr);
+
+		memset(data, 0, MAX_AUDIT_MESSAGE_LENGTH);
+        	// Next payload 
+		vec[1].iov_base = data;
+		vec[1].iov_len = MAX_AUDIT_MESSAGE_LENGTH; 
+
+		rc = readv(pipe_fd, vec, 2);
+		if (rc == 0 || rc == -1) {
+			printf("rc == %d(%s)\n", rc, strerror(errno));
+			break;
+		}
+
+		/* Handle the AppArmor events.
+		 * 1500 is used for "old" style messages.
+		 * 1503 is used for APPARMOR_DENIED messages. 
+		 */
+		if ((hdr.type == 1500) || (hdr.type == 1503))
+		{
+			line = (char *) data;
+			record = NULL;
+			if (hdr.type == 1503)
+				is_rejection = 1;
+			if ((hdr.type == 1500) && (is_reject(line) == 0))
+				is_rejection = 1;
+
+			/* We only care about REJECTING messages */
+ 			if (is_rejection == 1)
+ 			{
+				/* parse_record expects things like they appear in audit.log -
+				 * which means we need to prepend TYPE=APPARMOR (if hdr.type is 1500)
+				 * or type=APPARMOR_DENIED (if hdr.type is 1503).  This is not ideal.
+				 */
+				real_data_size = strlen(line);
+				if (hdr.type == 1500)
+				{
+					parsable_line = (char *) malloc(real_data_size + 20);
+					snprintf(parsable_line, real_data_size + 19, "type=APPARMOR msg=%s", line);
+				}
+				else
+				{
+					parsable_line = (char *) malloc(real_data_size + 27);
+					snprintf(parsable_line, real_data_size + 26, "type=APPARMOR_DENIED msg=%s", line);
+				}
+
+				record = parse_record(parsable_line);
+				message = dbus_message_new_signal("/com/Novell/AppArmor","com.novell.apparmor", "REJECT");
+				dbus_message_iter_init_append(message, &iter);
+
+				/*
+				 * The message has a number of fields appended to it,
+				 * all of which map to the aa_log_record struct that we get back from
+				 * parse_record().  If an entry in the struct is NULL or otherwise invalid,
+				 * the field is still appended as a single blank space (in the case of strings), or a 
+				 * 0 in case of integers (which are all PIDs and unlikely to ever be 0).
+				 *
+				 * TODO: Pass a bitmask int along for the denied & requested masks
+				 *
+				 * 1 - The full string - BYTE ARRAY
+				 * 2 - The PID (record->pid)  - DBUS_TYPE_INT64
+				 * 3 - The task (record->task) - DBUS_TYPE_INT64
+				 * 4 - The audit ID (record->audit_id) - DBUS_TYPE_STRING
+				 * 5 - The operation (record->operation: "Exec" "ptrace" etc) - DBUS_TYPE_STRING
+				 * 6 - The denied mask (record->denied_mask: "rwx" etc) - DBUS_TYPE_STRING
+				 * 7 - The requested mask (record->requested_mask) - DBUS_TYPE_STRING
+				 * 8 - The name of the profile (record->profile) - BYTE ARRAY
+				 * 9 - The first name field (record->name) - BYTE ARRAY
+				 * 10- The second name field (record->name2) - BYTE ARRAY
+				 * 11- The attribute (record->attribute) - DBUS_TYPE_STRING
+				 * 12- The parent task (record->parent) - BYTE ARRAY
+				 * 13- The magic token (record->magic_token) - DBUS_TYPE_INT64
+				 * 14- The info field (record->info) - BYTE ARRAY
+				 * 15- The active hat (record->active_hat) - BYTE ARRAY
+				 */
+
+ 				if (record != NULL)
+ 				{
+
+					/* Please note: NULLSPACE is defined at the top of this file, and will expand to
+					   a ternary conditional:
+					   (record->audit_id == NULL) ? &empty_string : &record->audit_id
+					   for example.
+
+					   The way we handle strings is ugly - some of the characters we allow (0x80, for example) are invalid Unicode,
+					   which will cause our DBus connection to be dropped if we send them as a DBUS_TYPE_STRING.
+					   Instead, we send a bunch of containers, each with a byte array.  Perhaps a struct would be better? 
+					*/
+
+					dbus_message_iter_open_container(&iter, DBUS_TYPE_ARRAY, DBUS_TYPE_BYTE_AS_STRING, &dataIter);
+					dbus_message_iter_append_fixed_array(&dataIter, DBUS_TYPE_BYTE, &data, strlen(data) + 1);
+					dbus_message_iter_close_container(&iter, &dataIter);
+
+					dbus_message_iter_append_basic(&iter, DBUS_TYPE_INT64, &record->pid);
+					dbus_message_iter_append_basic(&iter, DBUS_TYPE_INT64, &record->task);	
+					dbus_message_iter_append_basic(&iter, DBUS_TYPE_STRING, NULLSPACE(record->audit_id));
+					dbus_message_iter_append_basic(&iter, DBUS_TYPE_STRING, NULLSPACE(record->operation));
+
+					dbus_message_iter_append_basic(&iter, DBUS_TYPE_STRING, NULLSPACE(record->denied_mask));
+					dbus_message_iter_append_basic(&iter, DBUS_TYPE_STRING, NULLSPACE(record->requested_mask));
+
+					dbus_message_iter_open_container(&iter, DBUS_TYPE_ARRAY, DBUS_TYPE_BYTE_AS_STRING, &profileIter);
+					dbus_message_iter_append_fixed_array(&profileIter,
+										DBUS_TYPE_BYTE,
+										NULLSPACE(record->profile),
+										NULLSTRLEN(record->profile));
+					dbus_message_iter_close_container(&iter, &profileIter);
+
+					dbus_message_iter_open_container(&iter, DBUS_TYPE_ARRAY, DBUS_TYPE_BYTE_AS_STRING, &nameIter);
+					dbus_message_iter_append_fixed_array(&nameIter,
+										DBUS_TYPE_BYTE,
+										NULLSPACE(record->name),
+										NULLSTRLEN(record->name));
+					dbus_message_iter_close_container(&iter, &nameIter);
+
+					dbus_message_iter_open_container(&iter, DBUS_TYPE_ARRAY, DBUS_TYPE_BYTE_AS_STRING, &name2Iter);
+					dbus_message_iter_append_fixed_array(&name2Iter,
+										DBUS_TYPE_BYTE,
+										NULLSPACE(record->name2),
+										NULLSTRLEN(record->name2));
+					dbus_message_iter_close_container(&iter, &name2Iter);
+
+					dbus_message_iter_append_basic(&iter, DBUS_TYPE_STRING, NULLSPACE(record->attribute));
+
+					dbus_message_iter_open_container(&iter, DBUS_TYPE_ARRAY, DBUS_TYPE_BYTE_AS_STRING, &parentIter);
+					dbus_message_iter_append_fixed_array(&parentIter,
+										DBUS_TYPE_BYTE,
+										NULLSPACE(record->parent),
+										NULLSTRLEN(record->parent));
+					dbus_message_iter_close_container(&iter, &parentIter);
+
+					dbus_message_iter_append_basic(&iter, DBUS_TYPE_INT64, &record->magic_token);
+					dbus_message_iter_append_basic(&iter, DBUS_TYPE_STRING, NULLSPACE(record->info));
+
+					dbus_message_iter_open_container(&iter, DBUS_TYPE_ARRAY, DBUS_TYPE_BYTE_AS_STRING, &activeIter);
+					dbus_message_iter_append_fixed_array(&activeIter,
+										DBUS_TYPE_BYTE,
+										NULLSPACE(record->active_hat),
+										NULLSTRLEN(record->active_hat));
+					dbus_message_iter_close_container(&iter, &activeIter);
+
+
+				}
+				dbus_connection_send(con, message, NULL);
+				dbus_connection_flush(con);
+				dbus_message_unref(message);
+  				free_record(record);
+
+				if (parsable_line != NULL)
+					free(parsable_line);
+ 			}
+		}
+	} while(!signaled);
+
+	if (con)
+	        dbus_connection_unref(con);
+	free(data);
+	return 0;
+}
--- a/libraries/libapparmor/testsuite/test_multi/file_perm_network_lp1466812.err
+++ b/libraries/libapparmor/testsuite/test_multi/file_perm_network_lp1466812.err
--- a/deprecated/management/applets/apparmorapplet-gnome/AppArmor_Monitor_Factory.server.in
+++ b/deprecated/management/applets/apparmorapplet-gnome/AppArmor_Monitor_Factory.server.in
@@ -0,0 +1,25 @@
+<oaf_info>
+<oaf_server iid="OAFIID:AppArmorApplet_Factory" type="exe"
+            location="@LIBEXECDIR@/apparmorapplet">
+        <oaf_attribute name="repo_ids" type="stringv">
+                <item value="IDL:Bonobo/GenericFactory:1.0"/>
+                <item value="IDL:Bonobo/Unknown:1.0"/>
+        </oaf_attribute>
+        <oaf_attribute name="name" type="string" value="AppArmor Monitor Factory"/>
+        <oaf_attribute name="description" type="string" value="AppArmor Desktop Monitor factory"/>
+</oaf_server>
+
+<oaf_server iid="OAFIID:AppArmorApplet" type="factory"
+            location="OAFIID:AppArmorApplet_Factory">
+
+        <oaf_attribute name="repo_ids" type="stringv">
+                <item value="IDL:GNOME/Vertigo/PanelAppletShell:1.0"/>
+                <item value="IDL:Bonobo/Control:1.0"/>
+                <item value="IDL:Bonobo/Unknown:1.0"/>
+        </oaf_attribute>
+        <oaf_attribute name="name" type="string" value="AppArmor Desktop Monitor"/>
+        <oaf_attribute name="description" type="string" value="AppArmor Desktop Monitor"/>
+        <oaf_attribute name="panel:category" type="string" value="Utilities"/>
+        <oaf_attribute name="panel:icon" type="string" value="apparmor_default.png"/>
+</oaf_server>
+</oaf_info>
--- a/deprecated/management/applets/apparmorapplet-gnome/COPYING
+++ b/deprecated/management/applets/apparmorapplet-gnome/COPYING
@@ -0,0 +1,340 @@
+		    GNU GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+     51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+			    Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+		    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+			    NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+		     END OF TERMS AND CONDITIONS
+
+	    How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+    Gnomovision version 69, Copyright (C) year  name of author
+    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+  `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+  <signature of Ty Coon>, 1 April 1989
+  Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs.  If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library.  If this is what you want to do, use the GNU Library General
+Public License instead of this License.
--- a/libraries/libapparmor/testsuite/test_multi/file_perm_network_receive_lp1577051.err
+++ b/libraries/libapparmor/testsuite/test_multi/file_perm_network_receive_lp1577051.err
--- a/deprecated/management/applets/apparmorapplet-gnome/INSTALL
+++ b/deprecated/management/applets/apparmorapplet-gnome/INSTALL
@@ -0,0 +1,236 @@
+Installation Instructions
+*************************
+
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free
+Software Foundation, Inc.
+
+This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
+
+Basic Installation
+==================
+
+These are generic installation instructions.
+
+   The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions.  Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+   It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring.  (Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.)
+
+   If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release.  If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+   The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'.  You only need
+`configure.ac' if you want to change it or regenerate `configure' using
+a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+  1. `cd' to the directory containing the package's source code and type
+     `./configure' to configure the package for your system.  If you're
+     using `csh' on an old version of System V, you might need to type
+     `sh ./configure' instead to prevent `csh' from trying to execute
+     `configure' itself.
+
+     Running `configure' takes awhile.  While running, it prints some
+     messages telling which features it is checking for.
+
+  2. Type `make' to compile the package.
+
+  3. Optionally, type `make check' to run any self-tests that come with
+     the package.
+
+  4. Type `make install' to install the programs and any data files and
+     documentation.
+
+  5. You can remove the program binaries and object files from the
+     source code directory by typing `make clean'.  To also remove the
+     files that `configure' created (so you can compile the package for
+     a different kind of computer), type `make distclean'.  There is
+     also a `make maintainer-clean' target, but that is intended mainly
+     for the package's developers.  If you use it, you may have to get
+     all sorts of other programs in order to regenerate files that came
+     with the distribution.
+
+Compilers and Options
+=====================
+
+Some systems require unusual options for compilation or linking that the
+`configure' script does not know about.  Run `./configure --help' for
+details on some of the pertinent environment variables.
+
+   You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment.  Here
+is an example:
+
+     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+
+   *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'.  `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script.  `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+   If you have to use a `make' that does not support the `VPATH'
+variable, you have to compile the package for one architecture at a
+time in the source code directory.  After you have installed the
+package for one architecture, use `make distclean' before reconfiguring
+for another architecture.
+
+Installation Names
+==================
+
+By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc.  You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX'.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
+
+   In addition, if you use an unusual directory layout you can give
+options like `--bindir=DIR' to specify different values for particular
+kinds of files.  Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System).  The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+   For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+There may be some features `configure' cannot figure out automatically,
+but needs to determine by the type of machine the package will run on.
+Usually, assuming the package is built to be run on the _same_
+architectures, `configure' can figure that out, but if it prints a
+message saying it cannot guess the machine type, give it the
+`--build=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+     CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+     OS KERNEL-OS
+
+   See the file `config.sub' for the possible values of each field.  If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+   If you are _building_ compiler tools for cross-compiling, you should
+use the option `--target=TYPE' to select the type of system they will
+produce code for.
+
+   If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+If you want to set default values for `configure' scripts to share, you
+can create a site shell script called `config.site' that gives default
+values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists.  Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+Variables not defined in a site shell script can be set in the
+environment passed to `configure'.  However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost.  In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'.  For example:
+
+     ./configure CC=/usr/local2/bin/gcc
+
+causes the specified `gcc' to be used as the C compiler (unless it is
+overridden in the site shell script).  Here is a another example:
+
+     /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent
+configuration-related scripts to be executed by `/bin/bash'.
+
+`configure' Invocation
+======================
+
+`configure' recognizes the following options to control how it operates.
+
+`--help'
+`-h'
+     Print a summary of the options to `configure', and exit.
+
+`--version'
+`-V'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`--cache-file=FILE'
+     Enable the cache: use and save the results of the tests in FILE,
+     traditionally `config.cache'.  FILE defaults to `/dev/null' to
+     disable caching.
+
+`--config-cache'
+`-C'
+     Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+     Do not print messages saying which checks are being made.  To
+     suppress all normal output, redirect it to `/dev/null' (any error
+     messages will still be shown).
+
+`--srcdir=DIR'
+     Look for the package's source code in directory DIR.  Usually
+     `configure' can determine that directory automatically.
+
+`configure' also accepts some other, not widely useful, options.  Run
+`configure --help' for more details.
+
--- a/deprecated/management/applets/apparmorapplet-gnome/Makefile.am
+++ b/deprecated/management/applets/apparmorapplet-gnome/Makefile.am
@@ -0,0 +1,14 @@
+## Process this file with automake to produce Makefile.in
+
+SUBDIRS = po src pixmaps
+
+EXTRA_DIST = \
+	autogen.sh \
+	AppArmor_Monitor_Factory.server.in
+
+serverdir	= $(libdir)/bonobo/servers
+server_in_files		= AppArmor_Monitor_Factory.server.in
+server_DATA		= AppArmor_Monitor_Factory.server
+AppArmor_Monitor_Factory.server:
+	sed -e "s|\@LIBEXECDIR\@|$(libexecdir)|" < AppArmor_Monitor_Factory.server.in > AppArmor_Monitor_Factory.server
+
--- a/libraries/libapparmor/testsuite/test_multi/file_perm_network_receive_lp1582374.err
+++ b/libraries/libapparmor/testsuite/test_multi/file_perm_network_receive_lp1582374.err
--- a/libraries/libapparmor/testsuite/test_multi/ptrace_garbage_lp1689667_1.err
+++ b/libraries/libapparmor/testsuite/test_multi/ptrace_garbage_lp1689667_1.err
--- a/deprecated/management/applets/apparmorapplet-gnome/apparmorapplet-gnome.spec
+++ b/deprecated/management/applets/apparmorapplet-gnome/apparmorapplet-gnome.spec
@@ -0,0 +1,48 @@
+# norootforbuild
+
+Name:		apparmorapplet-gnome
+Version:	0.9
+Release:	1
+URL:		http://forge.novell.com/modules/xfmod/project/?apparmor
+BuildRequires:	gnome-common gnome-desktop-devel gnome-panel-devel 
+%if %suse_version > 1010
+BuildRequires:  dbus-1-glib-devel
+%else
+BuildRequires:  dbus-1-devel dbus-1-glib
+%endif
+Group:		System/GUI/GNOME
+Requires:	apparmor-dbus
+BuildRoot:	%{_tmppath}/%{name}-%{version}-build
+Source0:	%{name}-%{version}.tar.bz2
+Summary:	An AppArmor event notification applet for GNOME
+License:	GPL
+
+%description
+This taskbar applet receives AppArmor events over DBUS, and notifies
+the user when AppArmor prevents an application from functioning.
+
+%prep
+%setup -q
+
+%build
+autoreconf -f -i
+
+%configure --prefix=%{_prefix} --libexecdir=%{_prefix}/lib/apparmorapplet
+make %{?jobs:-j%jobs}
+
+%install
+%makeinstall
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+%files
+%defattr (-, root, root)
+%doc AUTHORS COPYING ChangeLog NEWS README
+%{_libdir}/bonobo/servers/*.server
+%{_prefix}/lib/apparmorapplet
+%{_datadir}/pixmaps/*
+
+%changelog
+* Wed Jul 25 2007 - mbarringer@suse.de
+- Initial package creation
--- a/deprecated/management/applets/apparmorapplet-gnome/autogen.sh
+++ b/deprecated/management/applets/apparmorapplet-gnome/autogen.sh
@@ -0,0 +1,159 @@
+#!/bin/sh
+# Run this to generate all the initial makefiles, etc.
+
+srcdir=`dirname $0`
+test -z "$srcdir" && srcdir=.
+
+DIE=0
+
+if [ -n "$GNOME2_DIR" ]; then
+	ACLOCAL_FLAGS="-I $GNOME2_DIR/share/aclocal $ACLOCAL_FLAGS"
+	LD_LIBRARY_PATH="$GNOME2_DIR/lib:$LD_LIBRARY_PATH"
+	PATH="$GNOME2_DIR/bin:$PATH"
+	export PATH
+	export LD_LIBRARY_PATH
+fi
+
+(test -f $srcdir/configure.in) || {
+    echo -n "**Error**: Directory "\`$srcdir\'" does not look like the"
+    echo " top-level package directory"
+    exit 1
+}
+
+(autoconf --version) < /dev/null > /dev/null 2>&1 || {
+  echo
+  echo "**Error**: You must have \`autoconf' installed."
+  echo "Download the appropriate package for your distribution,"
+  echo "or get the source tarball at ftp://ftp.gnu.org/pub/gnu/"
+  DIE=1
+}
+
+(grep "^AC_PROG_INTLTOOL" $srcdir/configure.in >/dev/null) && {
+  (intltoolize --version) < /dev/null > /dev/null 2>&1 || {
+    echo 
+    echo "**Error**: You must have \`intltool' installed."
+    echo "You can get it from:"
+    echo "  ftp://ftp.gnome.org/pub/GNOME/"
+    DIE=1
+  }
+}
+
+(grep "^AM_PROG_XML_I18N_TOOLS" $srcdir/configure.in >/dev/null) && {
+  (xml-i18n-toolize --version) < /dev/null > /dev/null 2>&1 || {
+    echo
+    echo "**Error**: You must have \`xml-i18n-toolize' installed."
+    echo "You can get it from:"
+    echo "  ftp://ftp.gnome.org/pub/GNOME/"
+    DIE=1
+  }
+}
+
+(grep "^AM_PROG_LIBTOOL" $srcdir/configure.in >/dev/null) && {
+  (libtool --version) < /dev/null > /dev/null 2>&1 || {
+    echo
+    echo "**Error**: You must have \`libtool' installed."
+    echo "You can get it from: ftp://ftp.gnu.org/pub/gnu/"
+    DIE=1
+  }
+}
+
+(grep "^AM_GLIB_GNU_GETTEXT" $srcdir/configure.in >/dev/null) && {
+  (grep "sed.*POTFILES" $srcdir/configure.in) > /dev/null || \
+  (glib-gettextize --version) < /dev/null > /dev/null 2>&1 || {
+    echo
+    echo "**Error**: You must have \`glib' installed."
+    echo "You can get it from: ftp://ftp.gtk.org/pub/gtk"
+    DIE=1
+  }
+}
+
+(automake --version) < /dev/null > /dev/null 2>&1 || {
+  echo
+  echo "**Error**: You must have \`automake' installed."
+  echo "You can get it from: ftp://ftp.gnu.org/pub/gnu/"
+  DIE=1
+  NO_AUTOMAKE=yes
+}
+
+
+# if no automake, don't bother testing for aclocal
+test -n "$NO_AUTOMAKE" || (aclocal --version) < /dev/null > /dev/null 2>&1 || {
+  echo
+  echo "**Error**: Missing \`aclocal'.  The version of \`automake'"
+  echo "installed doesn't appear recent enough."
+  echo "You can get automake from ftp://ftp.gnu.org/pub/gnu/"
+  DIE=1
+}
+
+if test "$DIE" -eq 1; then
+  exit 1
+fi
+
+if test -z "$*"; then
+  echo "**Warning**: I am going to run \`configure' with no arguments."
+  echo "If you wish to pass any to it, please specify them on the"
+  echo \`$0\'" command line."
+  echo
+fi
+
+case $CC in
+xlc )
+  am_opt=--include-deps;;
+esac
+
+for coin in `find $srcdir -name configure.in -print`
+do 
+  dr=`dirname $coin`
+  if test -f $dr/NO-AUTO-GEN; then
+    echo skipping $dr -- flagged as no auto-gen
+  else
+    echo processing $dr
+    ( cd $dr
+
+      aclocalinclude="$ACLOCAL_FLAGS"
+
+      if grep "^AM_GLIB_GNU_GETTEXT" configure.in >/dev/null; then
+	echo "Creating $dr/aclocal.m4 ..."
+	test -r $dr/aclocal.m4 || touch $dr/aclocal.m4
+	echo "Running glib-gettextize...  Ignore non-fatal messages."
+	echo "no" | glib-gettextize --force --copy
+	echo "Making $dr/aclocal.m4 writable ..."
+	test -r $dr/aclocal.m4 && chmod u+w $dr/aclocal.m4
+      fi
+      if grep "^AC_PROG_INTLTOOL" configure.in >/dev/null; then
+        echo "Running intltoolize..."
+	intltoolize --copy --force --automake
+      fi
+      if grep "^AM_PROG_XML_I18N_TOOLS" configure.in >/dev/null; then
+        echo "Running xml-i18n-toolize..."
+	xml-i18n-toolize --copy --force --automake
+      fi
+      if grep "^AM_PROG_LIBTOOL" configure.in >/dev/null; then
+	if test -z "$NO_LIBTOOLIZE" ; then 
+	  echo "Running libtoolize..."
+	  libtoolize --force --copy
+	fi
+      fi
+      echo "Running aclocal $aclocalinclude ..."
+      aclocal $aclocalinclude
+      if grep "^AM_CONFIG_HEADER" configure.in >/dev/null; then
+	echo "Running autoheader..."
+	autoheader
+      fi
+      echo "Running automake --gnu $am_opt ..."
+      automake --add-missing --gnu $am_opt
+      echo "Running autoconf ..."
+      autoconf
+    )
+  fi
+done
+
+conf_flags="--enable-maintainer-mode"
+
+if test x$NOCONFIGURE = x; then
+  echo Running $srcdir/configure $conf_flags "$@" ...
+  $srcdir/configure $conf_flags "$@" \
+  && echo Now type \`make\' to compile. || exit 1
+else
+  echo Skipping configure process.
+fi
--- a/deprecated/management/applets/apparmorapplet-gnome/config.h.in
+++ b/deprecated/management/applets/apparmorapplet-gnome/config.h.in
@@ -0,0 +1,76 @@
+/* config.h.in.  Generated from configure.in by autoheader.  */
+
+/* always defined to indicate that i18n is enabled */
+#undef ENABLE_NLS
+
+/* Gettext package. */
+#undef GETTEXT_PACKAGE
+
+/* Define to 1 if you have the `bind_textdomain_codeset' function. */
+#undef HAVE_BIND_TEXTDOMAIN_CODESET
+
+/* Define to 1 if you have the `dcgettext' function. */
+#undef HAVE_DCGETTEXT
+
+/* Define to 1 if you have the <dlfcn.h> header file. */
+#undef HAVE_DLFCN_H
+
+/* Define if the GNU gettext() function is already present or preinstalled. */
+#undef HAVE_GETTEXT
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define if your <locale.h> file defines LC_MESSAGES. */
+#undef HAVE_LC_MESSAGES
+
+/* Define to 1 if you have the <locale.h> header file. */
+#undef HAVE_LOCALE_H
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Name of package */
+#undef PACKAGE
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Version number of package */
+#undef VERSION
--- a/deprecated/management/applets/apparmorapplet-gnome/configure.in
+++ b/deprecated/management/applets/apparmorapplet-gnome/configure.in
@@ -0,0 +1,41 @@
+AC_INIT(configure.in)
+AM_INIT_AUTOMAKE(apparmorapplet-gnome, 0.9)
+AM_CONFIG_HEADER(config.h)
+AM_MAINTAINER_MODE
+
+AC_ISC_POSIX
+AC_PROG_CC
+AM_PROG_CC_STDC
+AC_HEADER_STDC
+
+pkg_modules="gtk+-2.0 >= 2.0.0"
+PKG_CHECK_MODULES(PACKAGE, [$pkg_modules])
+AC_SUBST(PACKAGE_CFLAGS)
+AC_SUBST(PACKAGE_LIBS)
+
+GETTEXT_PACKAGE=apparmorapplet
+AC_SUBST(GETTEXT_PACKAGE)
+AC_DEFINE_UNQUOTED(GETTEXT_PACKAGE,"$GETTEXT_PACKAGE", [Gettext package.])
+
+dnl Add the languages which your application supports here.
+ALL_LINGUAS=""
+AM_GLIB_GNU_GETTEXT
+
+AM_PROG_LIBTOOL
+
+dnl PKG_CHECK_MODULES(PACKAGE, [libgnomeui-2.0 gtk+-2.0])
+PKG_CHECK_MODULES(PACKAGE, [libgnomeui-2.0 gtk+-2.0 libpanelapplet-2.0 gnome-vfs-2.0 libgnome-2.0 libglade-2.0 dbus-1.0])
+
+pixmapsdir="${datadir}/pixmaps"
+AC_SUBST(pixmapsdir)
+
+AC_SUBST(PACKAGE_CFLAGS)
+AC_SUBST(PACKAGE_LIBS)
+
+AC_OUTPUT([
+Makefile
+po/Makefile.in
+src/Makefile
+pixmaps/Makefile
+])
+
--- a/deprecated/management/applets/apparmorapplet-gnome/pixmaps/Makefile.am
+++ b/deprecated/management/applets/apparmorapplet-gnome/pixmaps/Makefile.am
@@ -0,0 +1,6 @@
+apparmor_applet_pixmapsdir = $(pixmapsdir)
+
+apparmor_applet_pixmaps_DATA = \
+	apparmor_alert.png  apparmor_default.png
+	
+EXTRA_DIST = $(apparmor_applet_pixmaps_DATA)
--- a/deprecated/management/applets/apparmorapplet-gnome/pixmaps/apparmor_alert.png
+++ b/deprecated/management/applets/apparmorapplet-gnome/pixmaps/apparmor_alert.png
--- a/deprecated/management/applets/apparmorapplet-gnome/pixmaps/apparmor_default.png
+++ b/deprecated/management/applets/apparmorapplet-gnome/pixmaps/apparmor_default.png
--- a/libraries/libapparmor/testsuite/test_multi/ptrace_garbage_lp1689667_2.err
+++ b/libraries/libapparmor/testsuite/test_multi/ptrace_garbage_lp1689667_2.err
--- a/deprecated/management/applets/apparmorapplet-gnome/po/Makefile.in.in
+++ b/deprecated/management/applets/apparmorapplet-gnome/po/Makefile.in.in
@@ -0,0 +1,258 @@
+# Makefile for program source directory in GNU NLS utilities package.
+# Copyright (C) 1995, 1996, 1997 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
+#
+# This file file be copied and used freely without restrictions.  It can
+# be used in projects which are not available under the GNU Public License
+# but which still want to provide support for the GNU gettext functionality.
+# Please note that the actual code is *not* freely available.
+#
+# - Modified by Owen Taylor <otaylor@redhat.com> to use GETTEXT_PACKAGE
+#   instead of PACKAGE and to look for po2tbl in ./ not in intl/
+#
+# - Modified by jacob berkman <jacob@ximian.com> to install
+#   Makefile.in.in and po2tbl.sed.in for use with glib-gettextize
+
+GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
+PACKAGE = @PACKAGE@
+VERSION = @VERSION@
+
+SHELL = /bin/sh
+@SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+datarootdir = @datarootdir@
+datadir = @datadir@
+libdir = @libdir@
+localedir = $(libdir)/locale
+gnulocaledir = $(datadir)/locale
+gettextsrcdir = $(datadir)/glib-2.0/gettext/po
+subdir = po
+
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+
+CC = @CC@
+GENCAT = @GENCAT@
+GMSGFMT = @GMSGFMT@
+MSGFMT = @MSGFMT@
+MSGFMT_OPTS = @MSGFMT_OPTS@
+XGETTEXT = @XGETTEXT@
+MSGMERGE = msgmerge
+
+DEFS = @DEFS@
+CFLAGS = @CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+
+INCLUDES = -I.. -I$(top_srcdir)/intl
+
+COMPILE = $(CC) -c $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS) $(XCFLAGS)
+
+SOURCES = 
+POFILES = @POFILES@
+GMOFILES = @GMOFILES@
+DISTFILES = ChangeLog Makefile.in.in POTFILES.in $(GETTEXT_PACKAGE).pot \
+$(POFILES) $(GMOFILES) $(SOURCES)
+
+POTFILES = \
+
+CATALOGS = @CATALOGS@
+CATOBJEXT = @CATOBJEXT@
+INSTOBJEXT = @INSTOBJEXT@
+
+.SUFFIXES:
+.SUFFIXES: .c .o .po .pox .gmo .mo .msg .cat
+
+.c.o:
+	$(COMPILE) $<
+
+.po.pox:
+	$(MAKE) $(GETTEXT_PACKAGE).pot
+	$(MSGMERGE) $< $(srcdir)/$(GETTEXT_PACKAGE).pot -o $*.pox
+
+.po.mo:
+	$(MSGFMT) -o $@ $<
+
+.po.gmo:
+	file=$(srcdir)/`echo $* | sed 's,.*/,,'`.gmo \
+	  && rm -f $$file && $(GMSGFMT) $(MSGFMT_OPTS) -o $$file $<
+
+.po.cat:
+	sed -f ../intl/po2msg.sed < $< > $*.msg \
+	  && rm -f $@ && $(GENCAT) $@ $*.msg
+
+
+all: all-@USE_NLS@
+
+all-yes: $(CATALOGS)
+all-no:
+
+$(srcdir)/$(GETTEXT_PACKAGE).pot: $(POTFILES)
+	$(XGETTEXT) --default-domain=$(GETTEXT_PACKAGE) --directory=$(top_srcdir) \
+	  --add-comments --keyword=_ --keyword=N_ \
+          --flag=g_strdup_printf:1:c-format \
+          --flag=g_string_printf:2:c-format \
+          --flag=g_string_append_printf:2:c-format \
+          --flag=g_error_new:3:c-format \
+          --flag=g_set_error:4:c-format \
+          --flag=g_markup_printf_escaped:1:c-format \
+          --flag=g_log:3:c-format \
+          --flag=g_print:1:c-format \
+          --flag=g_printerr:1:c-format \
+          --flag=g_printf:1:c-format \
+          --flag=g_fprintf:2:c-format \
+          --flag=g_sprintf:2:c-format \
+          --flag=g_snprintf:3:c-format \
+          --flag=g_scanner_error:2:c-format \
+          --flag=g_scanner_warn:2:c-format \
+	  --files-from=$(srcdir)/POTFILES.in \
+	&& test ! -f $(GETTEXT_PACKAGE).po \
+	   || ( rm -f $(srcdir)/$(GETTEXT_PACKAGE).pot \
+		&& mv $(GETTEXT_PACKAGE).po $(srcdir)/$(GETTEXT_PACKAGE).pot )
+
+install: install-exec install-data
+install-exec:
+install-data: install-data-@USE_NLS@
+install-data-no: all
+install-data-yes: all
+	@mkdir_p@ $(DESTDIR)$(datadir)
+	@catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  case "$$cat" in \
+	    *.gmo) destdir=$(gnulocaledir);; \
+	    *)     destdir=$(localedir);; \
+	  esac; \
+	  lang=`echo $$cat | sed 's/\$(CATOBJEXT)$$//'`; \
+	  dir=$(DESTDIR)$$destdir/$$lang/LC_MESSAGES; \
+	  @mkdir_p@ $$dir; \
+	  if test -r $$cat; then \
+	    $(INSTALL_DATA) $$cat $$dir/$(GETTEXT_PACKAGE)$(INSTOBJEXT); \
+	    echo "installing $$cat as $$dir/$(GETTEXT_PACKAGE)$(INSTOBJEXT)"; \
+	  else \
+	    $(INSTALL_DATA) $(srcdir)/$$cat $$dir/$(GETTEXT_PACKAGE)$(INSTOBJEXT); \
+	    echo "installing $(srcdir)/$$cat as" \
+		 "$$dir/$(GETTEXT_PACKAGE)$(INSTOBJEXT)"; \
+	  fi; \
+	  if test -r $$cat.m; then \
+	    $(INSTALL_DATA) $$cat.m $$dir/$(GETTEXT_PACKAGE)$(INSTOBJEXT).m; \
+	    echo "installing $$cat.m as $$dir/$(GETTEXT_PACKAGE)$(INSTOBJEXT).m"; \
+	  else \
+	    if test -r $(srcdir)/$$cat.m ; then \
+	      $(INSTALL_DATA) $(srcdir)/$$cat.m \
+		$$dir/$(GETTEXT_PACKAGE)$(INSTOBJEXT).m; \
+	      echo "installing $(srcdir)/$$cat as" \
+		   "$$dir/$(GETTEXT_PACKAGE)$(INSTOBJEXT).m"; \
+	    else \
+	      true; \
+	    fi; \
+	  fi; \
+	done
+	if test "$(PACKAGE)" = "glib"; then \
+	  @mkdir_p@ $(DESTDIR)$(gettextsrcdir); \
+	  $(INSTALL_DATA) $(srcdir)/Makefile.in.in \
+			  $(DESTDIR)$(gettextsrcdir)/Makefile.in.in; \
+	else \
+	  : ; \
+	fi
+
+# Define this as empty until I found a useful application.
+installcheck:
+
+uninstall:
+	catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed 's/\$(CATOBJEXT)$$//'`; \
+	  rm -f $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE)$(INSTOBJEXT); \
+	  rm -f $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE)$(INSTOBJEXT).m; \
+	  rm -f $(DESTDIR)$(gnulocaledir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE)$(INSTOBJEXT); \
+	  rm -f $(DESTDIR)$(gnulocaledir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE)$(INSTOBJEXT).m; \
+	done
+	if test "$(PACKAGE)" = "glib"; then \
+	  rm -f $(DESTDIR)$(gettextsrcdir)/Makefile.in.in; \
+	fi
+
+check: all
+
+dvi info tags TAGS ID:
+
+mostlyclean:
+	rm -f core core.* *.pox $(GETTEXT_PACKAGE).po *.old.po cat-id-tbl.tmp
+	rm -fr *.o
+
+clean: mostlyclean
+
+distclean: clean
+	rm -f Makefile Makefile.in POTFILES *.mo *.msg *.cat *.cat.m
+
+maintainer-clean: distclean
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+	rm -f $(GMOFILES)
+
+distdir = ../$(GETTEXT_PACKAGE)-$(VERSION)/$(subdir)
+dist distdir: update-po $(DISTFILES)
+	dists="$(DISTFILES)"; \
+	for file in $$dists; do \
+	  ln $(srcdir)/$$file $(distdir) 2> /dev/null \
+	    || cp -p $(srcdir)/$$file $(distdir); \
+	done
+
+update-po: Makefile
+	$(MAKE) $(GETTEXT_PACKAGE).pot
+	tmpdir=`pwd`; \
+	cd $(srcdir); \
+	catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed 's/\$(CATOBJEXT)$$//'`; \
+	  echo "$$lang:"; \
+	  if $(MSGMERGE) $$lang.po $(GETTEXT_PACKAGE).pot -o $$tmpdir/$$lang.new.po; then \
+	    if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+	      rm -f $$tmpdir/$$lang.new.po; \
+            else \
+	      if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+	        :; \
+	      else \
+	        echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+	        rm -f $$tmpdir/$$lang.new.po; \
+	        exit 1; \
+	      fi; \
+	    fi; \
+	  else \
+	    echo "msgmerge for $$cat failed!"; \
+	    rm -f $$tmpdir/$$lang.new.po; \
+	  fi; \
+	done
+
+# POTFILES is created from POTFILES.in by stripping comments, empty lines
+# and Intltool tags (enclosed in square brackets), and appending a full
+# relative path to them
+POTFILES: POTFILES.in
+	( if test 'x$(srcdir)' != 'x.'; then \
+	    posrcprefix='$(top_srcdir)/'; \
+	  else \
+	    posrcprefix="../"; \
+	  fi; \
+	  rm -f $@-t $@ \
+	    && (sed -e '/^#/d' 						\
+		    -e "s/^\[.*\] +//" 					\
+		    -e '/^[ 	]*$$/d' 				\
+		    -e "s@.*@	$$posrcprefix& \\\\@" < $(srcdir)/$@.in	\
+		| sed -e '$$s/\\$$//') > $@-t \
+	    && chmod a-w $@-t \
+	    && mv $@-t $@ )
+
+Makefile: Makefile.in.in ../config.status POTFILES
+	cd .. \
+	  && CONFIG_FILES=$(subdir)/$@.in CONFIG_HEADERS= \
+	       $(SHELL) ./config.status
+
+# Tell versions [3.59,3.63) of GNU make not to export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
--- a/deprecated/management/applets/apparmorapplet-gnome/po/POTFILES.in
+++ b/deprecated/management/applets/apparmorapplet-gnome/po/POTFILES.in
@@ -0,0 +1,6 @@
+# List of source files containing translatable strings.
+
+src/apparmor-applet.c
+src/preferences_dialog.c
+src/reject_list.c
+
--- a/deprecated/management/applets/apparmorapplet-gnome/po/af.po
+++ b/deprecated/management/applets/apparmorapplet-gnome/po/af.po
@@ -0,0 +1,48 @@
+# Copyright (C) 2007 SuSE Linux Products GmbH, Nuernberg
+# This file is distributed under the same license as the package.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: installation\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2007-02-06 14:27-0800\n"
+"PO-Revision-Date: 2006-11-03 14:26\n"
+"Last-Translator: Novell Language <language@novell.com>\n"
+"Language-Team: Novell Language <language@novell.com>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: src/apparmor-applet.c:244
+msgid ""
+"AppArmorApplet is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2 of the License, or\n"
+"(at your option) any later version."
+msgstr ""
+
+#: src/preferences_dialog.c:31
+msgid "AppArmor Desktop Preferences"
+msgstr ""
+
+#: src/preferences_dialog.c:46
+#, fuzzy
+msgid "Profile Generation"
+msgstr "Profielinstellings"
+
+#: src/preferences_dialog.c:54
+msgid "Path"
+msgstr "Pad"
+
+#: src/preferences_dialog.c:76
+msgid "YAST"
+msgstr ""
+
+#: src/preferences_dialog.c:77
+msgid "genprof"
+msgstr ""
+
+#: src/reject_list.c:58
+msgid "AppArmor Rejections"
+msgstr ""
--- a/deprecated/management/applets/apparmorapplet-gnome/po/apparmorapplet.pot
+++ b/deprecated/management/applets/apparmorapplet-gnome/po/apparmorapplet.pot
@@ -0,0 +1,49 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2007-02-06 14:27-0800\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=CHARSET\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: src/apparmor-applet.c:244
+msgid ""
+"AppArmorApplet is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2 of the License, or\n"
+"(at your option) any later version."
+msgstr ""
+
+#: src/preferences_dialog.c:31
+msgid "AppArmor Desktop Preferences"
+msgstr ""
+
+#: src/preferences_dialog.c:46
+msgid "Profile Generation"
+msgstr ""
+
+#: src/preferences_dialog.c:54
+msgid "Path"
+msgstr ""
+
+#: src/preferences_dialog.c:76
+msgid "YAST"
+msgstr ""
+
+#: src/preferences_dialog.c:77
+msgid "genprof"
+msgstr ""
+
+#: src/reject_list.c:58
+msgid "AppArmor Rejections"
+msgstr ""
--- a/deprecated/management/applets/apparmorapplet-gnome/po/ar.po
+++ b/deprecated/management/applets/apparmorapplet-gnome/po/ar.po
@@ -0,0 +1,43 @@
+# Copyright (C) 2006 SuSE Linux Products GmbH, Nuernberg
+# This file is distributed under the same license as the package.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: apparmorapplet\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2007-02-06 14:27-0800\n"
+"PO-Revision-Date: 2009-02-06 08:04\n"
+"Last-Translator: Novell Language <language@novell.com>\n"
+"Language-Team: Novell Language <language@novell.com>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: src/apparmor-applet.c:244
+msgid "AppArmorApplet is free software; you can redistribute it and/or modify\nit under the terms of the GNU General Public License as published by\nthe Free Software Foundation; either version 2 of the License, or\n(at your option) any later version."
+msgstr "AppArmorApplet برنامج مجاني؛ يمكنك إعادة توزيعه و/أو تعديله\nبموجب بنود رخصة GNU العمومية الذي\nنشرته مؤسسة البرمجيات الحرة، إما من الإصدار الثاني من الرخصة، أو\n)وفقًا لاختيارك) أي إصدار أحدث."
+
+#: src/preferences_dialog.c:31
+msgid "AppArmor Desktop Preferences"
+msgstr "تفضيلات سطح مكتب AppArmor"
+
+#: src/preferences_dialog.c:46
+msgid "Profile Generation"
+msgstr "إنشاء ملف التعريف"
+
+#: src/preferences_dialog.c:54
+msgid "Path"
+msgstr "المسار"
+
+#: src/preferences_dialog.c:76
+msgid "YAST"
+msgstr "YaST"
+
+#: src/preferences_dialog.c:77
+msgid "genprof"
+msgstr "genprof"
+
+#: src/reject_list.c:58
+msgid "AppArmor Rejections"
+msgstr "حالات رفض AppArmor"
+
--- a/deprecated/management/applets/apparmorapplet-gnome/po/bg.po
+++ b/deprecated/management/applets/apparmorapplet-gnome/po/bg.po
@@ -0,0 +1,53 @@
+# translation of apparmorapplet.bg.po to Bulgarian
+# Borislav Mitev <morbid_viper@tkzs.org>, 2008.
+# Velislav Varbanov <varbanov@bglinux.org>, 2008.
+msgid ""
+msgstr ""
+"Project-Id-Version: apparmorapplet.bg\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2007-02-06 14:27-0800\n"
+"PO-Revision-Date: 2008-05-13 22:02+0300\n"
+"Last-Translator: Velislav Varbanov <varbanov@bglinux.org>\n"
+"Language-Team: Bulgarian <bg@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+"X-Generator: KBabel 1.11.4\n"
+
+#: src/apparmor-applet.c:244
+msgid ""
+"AppArmorApplet is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2 of the License, or\n"
+"(at your option) any later version."
+msgstr ""
+"AppArmorApplet е свободен софтуер. Можете да го разпространявате\n"
+"и/или променяте според условията на Общия публичен лиценз на GNU,\n"
+"както е публикуван от Фондацията за свободен софтер, версия 2 на\n"
+"лиценза или (по Ваше усмотрение) някоя по-висока версия."
+
+#: src/preferences_dialog.c:31
+msgid "AppArmor Desktop Preferences"
+msgstr "AppArmor настройки на средата"
+
+#: src/preferences_dialog.c:46
+msgid "Profile Generation"
+msgstr "Създаване на профил"
+
+#: src/preferences_dialog.c:54
+msgid "Path"
+msgstr "Път"
+
+#: src/preferences_dialog.c:76
+msgid "YAST"
+msgstr "YAST"
+
+#: src/preferences_dialog.c:77
+msgid "genprof"
+msgstr "genprof"
+
+#: src/reject_list.c:58
+msgid "AppArmor Rejections"
+msgstr "AppArmor откази"
+
--- a/deprecated/management/applets/apparmorapplet-gnome/po/bn.po
+++ b/deprecated/management/applets/apparmorapplet-gnome/po/bn.po
@@ -0,0 +1,45 @@
+msgid ""
+msgstr ""
+"Project-Id-Version: @PACKAGE@\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2007-02-06 14:27-0800\n"
+"PO-Revision-Date: 2004-08-09 10:24+0200\n"
+"Last-Translator: xxx <yyy@example.org>\n"
+"Language-Team: Bengali <i18n@suse.de>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=n != 1;\n"
+
+#: src/apparmor-applet.c:244
+msgid ""
+"AppArmorApplet is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2 of the License, or\n"
+"(at your option) any later version."
+msgstr ""
+
+#: src/preferences_dialog.c:31
+msgid "AppArmor Desktop Preferences"
+msgstr ""
+
+#: src/preferences_dialog.c:46
+#, fuzzy
+msgid "Profile Generation"
+msgstr "প্রোফাইলের সেটিং"
+
+#: src/preferences_dialog.c:54
+msgid "Path"
+msgstr "পথ"
+
+#: src/preferences_dialog.c:76
+msgid "YAST"
+msgstr ""
+
+#: src/preferences_dialog.c:77
+msgid "genprof"
+msgstr ""
+
+#: src/reject_list.c:58
+msgid "AppArmor Rejections"
+msgstr ""
--- a/deprecated/management/applets/apparmorapplet-gnome/po/bs.po
+++ b/deprecated/management/applets/apparmorapplet-gnome/po/bs.po
@@ -0,0 +1,44 @@
+msgid ""
+msgstr ""
+"Project-Id-Version: @PACKAGE@\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2007-02-06 14:27-0800\n"
+"PO-Revision-Date: 2002-07-23 18:27+0200\n"
+"Last-Translator: Damir Bjelobradic <Nagual@lugbih.org>\n"
+"Language-Team: Bosnian <i18n@suse.de>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n"
+
+#: src/apparmor-applet.c:244
+msgid ""
+"AppArmorApplet is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2 of the License, or\n"
+"(at your option) any later version."
+msgstr ""
+
+#: src/preferences_dialog.c:31
+msgid "AppArmor Desktop Preferences"
+msgstr ""
+
+#: src/preferences_dialog.c:46
+msgid "Profile Generation"
+msgstr ""
+
+#: src/preferences_dialog.c:54
+msgid "Path"
+msgstr ""
+
+#: src/preferences_dialog.c:76
+msgid "YAST"
+msgstr ""
+
+#: src/preferences_dialog.c:77
+msgid "genprof"
+msgstr ""
+
+#: src/reject_list.c:58
+msgid "AppArmor Rejections"
+msgstr ""
--- a/deprecated/management/applets/apparmorapplet-gnome/po/ca.po
+++ b/deprecated/management/applets/apparmorapplet-gnome/po/ca.po
@@ -0,0 +1,51 @@
+msgid ""
+msgstr ""
+"Project-Id-Version: @PACKAGE@\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2007-02-06 14:27-0800\n"
+"PO-Revision-Date: 2002-02-08 15:47+0100\n"
+"Last-Translator: Jaume Badiella <myotis@drac.com>\n"
+"Language-Team: Catalan\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: src/apparmor-applet.c:244
+#, fuzzy
+msgid ""
+"AppArmorApplet is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2 of the License, or\n"
+"(at your option) any later version."
+msgstr ""
+"El Power Manager és un programari lliure; el podeu redistribuir i/o\n"
+"modificar sota els termes de la Llicència pública general del GNU\n"
+"publicada per la Free Software Foundation; o bé la versió 2\n"
+"de la llicència, o bé (a la vostra opció) qualsevol versió més nova."
+
+#: src/preferences_dialog.c:31
+#, fuzzy
+msgid "AppArmor Desktop Preferences"
+msgstr "Preferències de l'escriptori"
+
+#: src/preferences_dialog.c:46
+#, fuzzy
+msgid "Profile Generation"
+msgstr "Configuració de perfil"
+
+#: src/preferences_dialog.c:54
+msgid "Path"
+msgstr "Camí"
+
+#: src/preferences_dialog.c:76
+msgid "YAST"
+msgstr ""
+
+#: src/preferences_dialog.c:77
+msgid "genprof"
+msgstr ""
+
+#: src/reject_list.c:58
+msgid "AppArmor Rejections"
+msgstr ""
--- a/deprecated/management/applets/apparmorapplet-gnome/po/cs.po
+++ b/deprecated/management/applets/apparmorapplet-gnome/po/cs.po
@@ -0,0 +1,43 @@
+# Copyright (C) 2006 SuSE Linux Products GmbH, Nuernberg
+# This file is distributed under the same license as the package.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: apparmorapplet\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2007-02-06 14:27-0800\n"
+"PO-Revision-Date: 2009-02-05 14:25\n"
+"Last-Translator: Novell Language <language@novell.com>\n"
+"Language-Team: Novell Language <language@novell.com>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: src/apparmor-applet.c:244
+msgid "AppArmorApplet is free software; you can redistribute it and/or modify\nit under the terms of the GNU General Public License as published by\nthe Free Software Foundation; either version 2 of the License, or\n(at your option) any later version."
+msgstr "AppArmorApplet je svobodný software; můžete ho dále šířit a/nebo\nupravit za podmínek stanovených licencí GNU General Public License,\npublikované organizací Free Software Foundation; buď verze 2\ntéto licence, nebo (podle vaší volby) jakékoli pozdější verze."
+
+#: src/preferences_dialog.c:31
+msgid "AppArmor Desktop Preferences"
+msgstr "Nastavení modulu AppArmor pro pracovní stanici"
+
+#: src/preferences_dialog.c:46
+msgid "Profile Generation"
+msgstr "Vytváření profilů"
+
+#: src/preferences_dialog.c:54
+msgid "Path"
+msgstr "Cesta"
+
+#: src/preferences_dialog.c:76
+msgid "YAST"
+msgstr "YaST"
+
+#: src/preferences_dialog.c:77
+msgid "genprof"
+msgstr "genprof"
+
+#: src/reject_list.c:58
+msgid "AppArmor Rejections"
+msgstr "Odmítnutí modulu AppArmor"
+
--- a/deprecated/management/applets/apparmorapplet-gnome/po/cy.po
+++ b/deprecated/management/applets/apparmorapplet-gnome/po/cy.po
@@ -0,0 +1,44 @@
+msgid ""
+msgstr ""
+"Project-Id-Version: @PACKAGE@\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2007-02-06 14:27-0800\n"
+"PO-Revision-Date: 2003-09-23 10:33+0200\n"
+"Last-Translator: Kevin Donnelly <kevin@dotmon.com>\n"
+"Language-Team: Welsh <i18n@suse.de>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=5; plural=(n == 0 ? 0 : n == 1 ? 1 : n < 6 ? 2 : n == 6 ? 3 : 4);\n"
+
+#: src/apparmor-applet.c:244
+msgid ""
+"AppArmorApplet is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2 of the License, or\n"
+"(at your option) any later version."
+msgstr ""
+
+#: src/preferences_dialog.c:31
+msgid "AppArmor Desktop Preferences"
+msgstr ""
+
+#: src/preferences_dialog.c:46
+msgid "Profile Generation"
+msgstr ""
+
+#: src/preferences_dialog.c:54
+msgid "Path"
+msgstr ""
+
+#: src/preferences_dialog.c:76
+msgid "YAST"
+msgstr ""
+
+#: src/preferences_dialog.c:77
+msgid "genprof"
+msgstr ""
+
+#: src/reject_list.c:58
+msgid "AppArmor Rejections"
+msgstr ""
--- a/deprecated/management/applets/apparmorapplet-gnome/po/da.po
+++ b/deprecated/management/applets/apparmorapplet-gnome/po/da.po
@@ -0,0 +1,55 @@
+# translation of apparmorapplet.po to dansk
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Martin Møller <martin@martinm-76.dk>, 2007.
+# Jan Madsen <jan.madsen.pt(a)gmail.com>, 2007.
+msgid ""
+msgstr ""
+"Project-Id-Version: apparmorapplet\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2007-02-06 14:27-0800\n"
+"PO-Revision-Date: 2007-08-15 10:57+0100\n"
+"Last-Translator: Jan Madsen <jan.madsen.pt(a)gmail.com>\n"
+"Language-Team: dansk <opensuse-translation@opensuse.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.11.4\n"
+
+#: src/apparmor-applet.c:244
+msgid ""
+"AppArmorApplet is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2 of the License, or\n"
+"(at your option) any later version."
+msgstr ""
+"AppArmorApplet er fri software. Du kan redistribuere det og/eller ændre\n"
+"det under betingelserne i GNU General Public License, som udgivet af\n"
+"Free Software Foundation; enten i version 2 af licensen eller\n"
+"(hvis du foretrækker det) i enhver senere version."
+
+#: src/preferences_dialog.c:31
+msgid "AppArmor Desktop Preferences"
+msgstr "AppArmor desktop-præferencer"
+
+#: src/preferences_dialog.c:46
+msgid "Profile Generation"
+msgstr "Profilgenerering"
+
+#: src/preferences_dialog.c:54
+msgid "Path"
+msgstr "Søgesti"
+
+#: src/preferences_dialog.c:76
+msgid "YAST"
+msgstr "YAST"
+
+#: src/preferences_dialog.c:77
+msgid "genprof"
+msgstr "genprof"
+
+#: src/reject_list.c:58
+msgid "AppArmor Rejections"
+msgstr "AppArmor afviste handlinger"
+
--- a/deprecated/management/applets/apparmorapplet-gnome/po/de.po
+++ b/deprecated/management/applets/apparmorapplet-gnome/po/de.po
@@ -0,0 +1,43 @@
+# Copyright (C) 2006 SuSE Linux Products GmbH, Nuernberg
+# This file is distributed under the same license as the package.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: apparmorapplet\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2007-02-06 14:27-0800\n"
+"PO-Revision-Date: 2009-02-05 13:38\n"
+"Last-Translator: Novell Language <language@novell.com>\n"
+"Language-Team: Novell Language <language@novell.com>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: src/apparmor-applet.c:244
+msgid "AppArmorApplet is free software; you can redistribute it and/or modify\nit under the terms of the GNU General Public License as published by\nthe Free Software Foundation; either version 2 of the License, or\n(at your option) any later version."
+msgstr "AppAmorApplet ist freie Software, Sie können sie gemäß der Bestimmungen\nder GNU General Public License (in der von\nder Free Software Foundation veröffentlichten Form) weiter verteilen und/oder bearbeiten. Dies gilt für Version 2 der Lizenz bzw.\neine beliebige höhere Version (nach Ihrem Ermessen)."
+
+#: src/preferences_dialog.c:31
+msgid "AppArmor Desktop Preferences"
+msgstr "AppAmor Desktop-Einstellungen"
+
+#: src/preferences_dialog.c:46
+msgid "Profile Generation"
+msgstr "Profilgenerierung"
+
+#: src/preferences_dialog.c:54
+msgid "Path"
+msgstr "Pfad"
+
+#: src/preferences_dialog.c:76
+msgid "YAST"
+msgstr "YaST"
+
+#: src/preferences_dialog.c:77
+msgid "genprof"
+msgstr "genprof"
+
+#: src/reject_list.c:58
+msgid "AppArmor Rejections"
+msgstr "AppAmor-Zurückweisungen"
+
--- a/deprecated/management/applets/apparmorapplet-gnome/po/el.po
+++ b/deprecated/management/applets/apparmorapplet-gnome/po/el.po
@@ -0,0 +1,59 @@
+# translation of apparmorapplet.el.po to Ελληνικά
+# translation of apparmorapplet.el to Greek
+# @TITLE@
+# Copyright (C) 2006, SUSE Linux GmbH, Nuremberg
+#
+# This file is distributed under the same license as @PACKAGE@ package. FIRST
+#
+# Vasileios Giannakopoulos <billg@hellug.gr>, 2007.
+# Kostas Boukouvalas <quantis@hellug.gr>, 2007.
+# Vasileios Giannakopoulos <billg@billg.gr>, 2008.
+msgid ""
+msgstr ""
+"Project-Id-Version: apparmorapplet.el\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2007-07-31 16:48-0600\n"
+"PO-Revision-Date: 2008-06-06 01:04+0100\n"
+"Last-Translator: Vasileios Giannakopoulos <billg@billg.gr>\n"
+"Language-Team: Ελληνικά <billg@billg.gr>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.11.4\n"
+
+#: src/apparmor-applet.c:244
+msgid ""
+"AppArmorApplet is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2 of the License, or\n"
+"(at your option) any later version."
+msgstr ""
+"Το AppArmorApplet είναι ελεύθερο λογισμικό; μπορείτε να το επαναδιανείμετε ή/και να το τροποποιήσετε\n"
+"υπό τους όρους της GNU General Public License όπως εκδόθηκε από\n"
+"το Free Software Foundation; είτε στην έκδοση 2 της Άδειας, ή\n"
+"(κατα την άποψή σας) σε νεότερη έκδοση."
+
+#: src/preferences_dialog.c:31
+msgid "AppArmor Desktop Preferences"
+msgstr "Προτιμήσεις Επιφάνειας Εργασίας AppArmor"
+
+#: src/preferences_dialog.c:46
+msgid "Profile Generation"
+msgstr "Δημιουργία Προφίλ"
+
+#: src/preferences_dialog.c:54
+msgid "Path"
+msgstr "Διαδρομή"
+
+#: src/preferences_dialog.c:76
+msgid "YAST"
+msgstr "YAST"
+
+#: src/preferences_dialog.c:77
+msgid "genprof"
+msgstr "genprof"
+
+#: src/reject_list.c:58
+msgid "AppArmor Rejections"
+msgstr "Απορριφθέντα AppArmor"
+
--- a/deprecated/management/applets/apparmorapplet-gnome/po/en_GB.po
+++ b/deprecated/management/applets/apparmorapplet-gnome/po/en_GB.po
@@ -0,0 +1,51 @@
+# Benjamin Weber, 2007.
+msgid ""
+msgstr ""
+"Project-Id-Version: @PACKAGE@\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2007-02-06 14:27-0800\n"
+"PO-Revision-Date: 2007-08-17 15:35+0100\n"
+"Last-Translator: Benjamin Weber\n"
+"Language-Team: British English\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8-bit\n"
+"Plural-Forms: nplurals=2; plural=n != 1;\n"
+"X-Generator: KAider 0.1\n"
+
+#: src/apparmor-applet.c:244
+msgid ""
+"AppArmorApplet is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2 of the License, or\n"
+"(at your option) any later version."
+msgstr ""
+"AppArmorApplet is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public Licence as published by\n"
+"the Free Software Foundation; either version 2 of the License, or\n"
+"(at your option) any later version."
+
+#: src/preferences_dialog.c:31
+msgid "AppArmor Desktop Preferences"
+msgstr "AppArmor Desktop Preferences"
+
+#: src/preferences_dialog.c:46
+msgid "Profile Generation"
+msgstr "Profile Generation"
+
+#: src/preferences_dialog.c:54
+msgid "Path"
+msgstr "Path"
+
+#: src/preferences_dialog.c:76
+msgid "YAST"
+msgstr "YaST"
+
+#: src/preferences_dialog.c:77
+msgid "genprof"
+msgstr "genprof"
+
+#: src/reject_list.c:58
+msgid "AppArmor Rejections"
+msgstr "AppArmor Rejections"
+
--- a/deprecated/management/applets/apparmorapplet-gnome/po/en_US.po
+++ b/deprecated/management/applets/apparmorapplet-gnome/po/en_US.po
@@ -0,0 +1,45 @@
+msgid ""
+msgstr ""
+"Project-Id-Version: @PACKAGE@\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2007-02-06 14:27-0800\n"
+"PO-Revision-Date: 2005-11-08 12:26+8\n"
+"Last-Translator: Steve Beattie <steve@immunix.com>\n"
+"Language-Team: English\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=n != 1;\n"
+
+#: src/apparmor-applet.c:244
+msgid ""
+"AppArmorApplet is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2 of the License, or\n"
+"(at your option) any later version."
+msgstr ""
+
+#: src/preferences_dialog.c:31
+msgid "AppArmor Desktop Preferences"
+msgstr ""
+
+#: src/preferences_dialog.c:46
+#, fuzzy
+msgid "Profile Generation"
+msgstr "Profile doesn't exist\n"
+
+#: src/preferences_dialog.c:54
+msgid "Path"
+msgstr "Path"
+
+#: src/preferences_dialog.c:76
+msgid "YAST"
+msgstr ""
+
+#: src/preferences_dialog.c:77
+msgid "genprof"
+msgstr ""
+
+#: src/reject_list.c:58
+msgid "AppArmor Rejections"
+msgstr ""
--- a/deprecated/management/applets/apparmorapplet-gnome/po/es.po
+++ b/deprecated/management/applets/apparmorapplet-gnome/po/es.po
@@ -0,0 +1,43 @@
+# Copyright (C) 2006 SuSE Linux Products GmbH, Nuernberg
+# This file is distributed under the same license as the package.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: apparmorapplet\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2007-02-06 14:27-0800\n"
+"PO-Revision-Date: 2009-02-04 14:32\n"
+"Last-Translator: Novell Language <language@novell.com>\n"
+"Language-Team: Novell Language <language@novell.com>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: src/apparmor-applet.c:244
+msgid "AppArmorApplet is free software; you can redistribute it and/or modify\nit under the terms of the GNU General Public License as published by\nthe Free Software Foundation; either version 2 of the License, or\n(at your option) any later version."
+msgstr "AppArmorApplet es un programa libre. Puede redistribuirlo y\nmodificarlo bajo los términos de la Licencia Pública General GNU,\ntal como la publica la Free Software Foundation, ya sea la versión 2\nde la licencia o cualquier versión posterior que elija."
+
+#: src/preferences_dialog.c:31
+msgid "AppArmor Desktop Preferences"
+msgstr "Preferencias de AppArmor para el escritorio"
+
+#: src/preferences_dialog.c:46
+msgid "Profile Generation"
+msgstr "Generación de perfiles"
+
+#: src/preferences_dialog.c:54
+msgid "Path"
+msgstr "Vía"
+
+#: src/preferences_dialog.c:76
+msgid "YAST"
+msgstr "YaST"
+
+#: src/preferences_dialog.c:77
+msgid "genprof"
+msgstr "genprof"
+
+#: src/reject_list.c:58
+msgid "AppArmor Rejections"
+msgstr "Rechazos de AppArmor"
+
--- a/deprecated/management/applets/apparmorapplet-gnome/po/et.po
+++ b/deprecated/management/applets/apparmorapplet-gnome/po/et.po
@@ -0,0 +1,48 @@
+# translation of apparmorapplet.et.po to Estonian
+# Ain Vagula <avagula@gmail.com>, 2007.
+msgid ""
+msgstr ""
+"Project-Id-Version: apparmorapplet.et\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2007-02-06 14:27-0800\n"
+"PO-Revision-Date: 2007-10-04 23:12+0300\n"
+"Last-Translator: Ain Vagula <avagula@gmail.com>\n"
+"Language-Team: Estonian <linux-ee@lists.eenet.ee>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms:  nplurals=2; plural=(n != 1);\n"
+"X-Generator: KBabel 1.11.4\n"
+
+#: src/apparmor-applet.c:244
+msgid ""
+"AppArmorApplet is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2 of the License, or\n"
+"(at your option) any later version."
+msgstr ""
+
+#: src/preferences_dialog.c:31
+msgid "AppArmor Desktop Preferences"
+msgstr "AppArmori töölaua eelistused"
+
+#: src/preferences_dialog.c:46
+msgid "Profile Generation"
+msgstr "Profiili genereerimine"
+
+#: src/preferences_dialog.c:54
+msgid "Path"
+msgstr "Asukoht"
+
+#: src/preferences_dialog.c:76
+msgid "YAST"
+msgstr "YAST"
+
+#: src/preferences_dialog.c:77
+msgid "genprof"
+msgstr "genprof"
+
+#: src/reject_list.c:58
+msgid "AppArmor Rejections"
+msgstr ""
+
--- a/deprecated/management/applets/apparmorapplet-gnome/po/fi.po
+++ b/deprecated/management/applets/apparmorapplet-gnome/po/fi.po
@@ -0,0 +1,52 @@
+# translation of apparmorapplet.po to suomi
+# Jyri Palokangas <jmp@opensuse.fi>, 2007.
+# Mikko Piippo <piippo@cc.helsinki.fi>, 2007.
+msgid ""
+msgstr ""
+"Project-Id-Version: apparmorapplet\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2007-02-06 14:27-0800\n"
+"PO-Revision-Date: 2007-08-21 17:52+0300\n"
+"Last-Translator: Mikko Piippo <piippo@cc.helsinki.fi>\n"
+"Language-Team: suomi <fi@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.11.4\n"
+"Plural-Forms: nplurals=2; plural=n != 1;\n"
+
+#: src/apparmor-applet.c:244
+msgid ""
+"AppArmorApplet is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2 of the License, or\n"
+"(at your option) any later version."
+msgstr ""
+"AppArmorApplet on vapaa ohjelma; voit levittää sitä edelleen ja/tai muokata \n"
+"sitä Free Software Foundation -säätiön julkaiseman GNU GPL -lisenssin ehtojen mukaisesti. \n"
+"Voit käyttää joko lisenssin versiota 2 tai halutessasi mitä tahansa uudempaa versiota."
+
+#: src/preferences_dialog.c:31
+msgid "AppArmor Desktop Preferences"
+msgstr "AppArmor-työpöytäasetukset"
+
+#: src/preferences_dialog.c:46
+msgid "Profile Generation"
+msgstr "Profiilin luominen"
+
+#: src/preferences_dialog.c:54
+msgid "Path"
+msgstr "Polku"
+
+#: src/preferences_dialog.c:76
+msgid "YAST"
+msgstr "YAST"
+
+#: src/preferences_dialog.c:77
+msgid "genprof"
+msgstr "genprof"
+
+#: src/reject_list.c:58
+msgid "AppArmor Rejections"
+msgstr "AppArmor hylkäykset"
+
--- a/deprecated/management/applets/apparmorapplet-gnome/po/fr.po
+++ b/deprecated/management/applets/apparmorapplet-gnome/po/fr.po
@@ -0,0 +1,43 @@
+# Copyright (C) 2006 SuSE Linux Products GmbH, Nuernberg
+# This file is distributed under the same license as the package.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: apparmorapplet\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2007-02-06 14:27-0800\n"
+"PO-Revision-Date: 2009-02-04 15:43\n"
+"Last-Translator: Novell Language <language@novell.com>\n"
+"Language-Team: Novell Language <language@novell.com>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: src/apparmor-applet.c:244
+msgid "AppArmorApplet is free software; you can redistribute it and/or modify\nit under the terms of the GNU General Public License as published by\nthe Free Software Foundation; either version 2 of the License, or\n(at your option) any later version."
+msgstr "L'applet AppArmor est un logiciel libre que vous pouvez \ndistribuer et/ou modifier conformément aux termes de la Licence Publique\nGénérale GNU, tel que publié par la Free Software Foundation \n(version 2 de la license ou toute autre version ultérieure, le cas échéant)."
+
+#: src/preferences_dialog.c:31
+msgid "AppArmor Desktop Preferences"
+msgstr "Préférences de bureau AppArmor"
+
+#: src/preferences_dialog.c:46
+msgid "Profile Generation"
+msgstr "Génération du profil"
+
+#: src/preferences_dialog.c:54
+msgid "Path"
+msgstr "Chemin d'accès"
+
+#: src/preferences_dialog.c:76
+msgid "YAST"
+msgstr "YaST"
+
+#: src/preferences_dialog.c:77
+msgid "genprof"
+msgstr "genprof"
+
+#: src/reject_list.c:58
+msgid "AppArmor Rejections"
+msgstr "Rejets AppArmor"
+
--- a/deprecated/management/applets/apparmorapplet-gnome/po/gl.po
+++ b/deprecated/management/applets/apparmorapplet-gnome/po/gl.po
@@ -0,0 +1,65 @@
+# translation of 
+#
+# Proxecto Trasno - Adaptación do software libre á lingua galega:  Se desexas
+# colaborar connosco, podes atopar máis información en <http://trasno.net>
+#
+
+# Galician message file for apparmorapplet
+# Copyright (C) 2000, 2001 SuSE GmbH.
+#
+# Jesús Bravo Álvarez <jba@pobox.com>, 2000.
+# Manuel A. Vazquez <xixirei@yahoo.es>, 2008.
+# Leandro Regueiro <leandro.regueiro@gmail.com>, 2008.
+#
+# Proxecto Trasno - Adaptación do software libre á lingua galega:  Se desexas
+# colaborar connosco, podes atopar máis información en <http://trasno.net>
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: apparmorapplet\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2007-02-06 14:27-0800\n"
+"PO-Revision-Date: 2008-05-02 14:02+0100\n"
+"Last-Translator: Leandro Regueiro <leandro DOT regueiro AT gmail DOT com>\n"
+"Language-Team: Galician <proxecto@trasno.net>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+
+#: src/apparmor-applet.c:244
+msgid ""
+"AppArmorApplet is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2 of the License, or\n"
+"(at your option) any later version."
+msgstr ""
+"AppArmorApplet é software libre; vostede pode redistribuílo e/ou\n"
+"modificalo baixo os termos da Licenza Pública Xeral de GNU publicada\n"
+"pola Free Software Foundation; baixo os termos da licenza na versión 2,\n"
+"ou calquera versión posterior (á súa elección)."
+
+#: src/preferences_dialog.c:31
+msgid "AppArmor Desktop Preferences"
+msgstr "Preferencias de AppArmor para o escritorio"
+
+#: src/preferences_dialog.c:46
+msgid "Profile Generation"
+msgstr "Xeración do perfil"
+
+#: src/preferences_dialog.c:54
+msgid "Path"
+msgstr "Ruta"
+
+#: src/preferences_dialog.c:76
+msgid "YAST"
+msgstr "YAST"
+
+#: src/preferences_dialog.c:77
+msgid "genprof"
+msgstr "genprof"
+
+#: src/reject_list.c:58
+msgid "AppArmor Rejections"
+msgstr "Rexeitamentos de AppArmor"
+
--- a/deprecated/management/applets/apparmorapplet-gnome/po/gu.po
+++ b/deprecated/management/applets/apparmorapplet-gnome/po/gu.po
@@ -0,0 +1,54 @@
+# Marathi message file for YaST2 (@memory@).
+# Copyright (C) 2007 SUSE Linux Products GmbH.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: YaST (@memory@)\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2007-02-06 14:27-0800\n"
+"PO-Revision-Date: 2005-07-29 15:37+0530\n"
+"Last-Translator: i18n@suse.de\n"
+"Language-Team: Gujarati <i18n@suse.de>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n!=1);\n"
+
+#: src/apparmor-applet.c:244
+#, fuzzy
+msgid ""
+"AppArmorApplet is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2 of the License, or\n"
+"(at your option) any later version."
+msgstr ""
+"પાવર મેનેજર નિશુલ્ક સોફ્ટવેર છે; તમે તે ફ્રી સોફ્ટવેર ફાઉન્ડેશન દ્વારા \n"
+"પ્રકાશિત GNU સામાન્ય જાહેર લાઇસેન્સની શરતો હેઠળ, ક્યાંતો લાઇસેન્સની આવૃતિ 2, અથવા \n"
+"(તમારા વિકલ્પ પ્રમાણે) અન્ય પછીની આવૃતિ, ફરીથી \n"
+"વહેચી શકો અને/અથવા તે બદલી શકો."
+
+#: src/preferences_dialog.c:31
+#, fuzzy
+msgid "AppArmor Desktop Preferences"
+msgstr " ડેસ્કટોપ પસંદગીઓ"
+
+#: src/preferences_dialog.c:46
+#, fuzzy
+msgid "Profile Generation"
+msgstr "પ્રોફાઈલ સેટિંગ્સ"
+
+#: src/preferences_dialog.c:54
+msgid "Path"
+msgstr "માર્ગ"
+
+#: src/preferences_dialog.c:76
+msgid "YAST"
+msgstr ""
+
+#: src/preferences_dialog.c:77
+msgid "genprof"
+msgstr ""
+
+#: src/reject_list.c:58
+msgid "AppArmor Rejections"
+msgstr ""
--- a/deprecated/management/applets/apparmorapplet-gnome/po/he.po
+++ b/deprecated/management/applets/apparmorapplet-gnome/po/he.po
@@ -0,0 +1,44 @@
+msgid ""
+msgstr ""
+"Project-Id-Version: @PACKAGE@\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2007-02-06 14:27-0800\n"
+"PO-Revision-Date: 2004-08-09 10:24+0200\n"
+"Last-Translator: xxx <yyy@example.org>\n"
+"Language-Team: Hebrew <i18n@suse.de>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=n != 1;\n"
+
+#: src/apparmor-applet.c:244
+msgid ""
+"AppArmorApplet is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2 of the License, or\n"
+"(at your option) any later version."
+msgstr ""
+
+#: src/preferences_dialog.c:31
+msgid "AppArmor Desktop Preferences"
+msgstr ""
+
+#: src/preferences_dialog.c:46
+msgid "Profile Generation"
+msgstr ""
+
+#: src/preferences_dialog.c:54
+msgid "Path"
+msgstr ""
+
+#: src/preferences_dialog.c:76
+msgid "YAST"
+msgstr ""
+
+#: src/preferences_dialog.c:77
+msgid "genprof"
+msgstr ""
+
+#: src/reject_list.c:58
+msgid "AppArmor Rejections"
+msgstr ""
--- a/deprecated/management/applets/apparmorapplet-gnome/po/hi.po
+++ b/deprecated/management/applets/apparmorapplet-gnome/po/hi.po
@@ -0,0 +1,53 @@
+# translation of apparmorapplet.hi.po to Hindi
+# Sangeeta Kumari <k.sangeeta09@gmail.com>, 2007.
+msgid ""
+msgstr ""
+"Project-Id-Version: apparmorapplet.hi\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2007-02-06 14:27-0800\n"
+"PO-Revision-Date: 2007-08-24 22:40+0530\n"
+"Last-Translator: \n"
+"Language-Team: Hindi <en@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"\n"
+"\n"
+"\n"
+"Plural-Forms: nplurals=2; plural=(n!=1);\n"
+"\n"
+"X-Generator: KBabel 1.11.4\n"
+
+#: src/apparmor-applet.c:244
+msgid ""
+"AppArmorApplet is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2 of the License, or\n"
+"(at your option) any later version."
+msgstr ""
+
+#: src/preferences_dialog.c:31
+msgid "AppArmor Desktop Preferences"
+msgstr ""
+
+#: src/preferences_dialog.c:46
+#, fuzzy
+msgid "Profile Generation"
+msgstr " प्रोफाइल सेटिंग "
+
+#: src/preferences_dialog.c:54
+msgid "Path"
+msgstr "पथ"
+
+#: src/preferences_dialog.c:76
+msgid "YAST"
+msgstr "YAST"
+
+#: src/preferences_dialog.c:77
+msgid "genprof"
+msgstr "genprof"
+
+#: src/reject_list.c:58
+msgid "AppArmor Rejections"
+msgstr ""
+
--- a/deprecated/management/applets/apparmorapplet-gnome/po/hr.po
+++ b/deprecated/management/applets/apparmorapplet-gnome/po/hr.po
@@ -0,0 +1,52 @@
+# translation of apparmorapplet.hr.po to Hrvatski
+# Krešimir Jozić <kjozic@gmail.com>, 2007.
+msgid ""
+msgstr ""
+"Project-Id-Version: apparmorapplet.hr\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2007-02-06 14:27-0800\n"
+"PO-Revision-Date: 2007-09-20 21:50+0200\n"
+"Last-Translator: Krešimir Jozić <kjozic@gmail.com>\n"
+"Language-Team: Hrvatski\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n"
+"X-Generator: KBabel 1.11.4\n"
+
+#: src/apparmor-applet.c:244
+msgid ""
+"AppArmorApplet is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2 of the License, or\n"
+"(at your option) any later version."
+msgstr ""
+"AppArmorApplet je slobodan program, možete ga redistribuirati i/ili prerađivati\n"
+"po pravilima GNU opće javne licence koju je objavila\n"
+"Free Software Foundation; bilo pod verzijom 2 Licence ili\n"
+"(po vašem izboru) bilo kojom novijom verzijom."
+
+#: src/preferences_dialog.c:31
+msgid "AppArmor Desktop Preferences"
+msgstr "AppArmor postavke radne površine"
+
+#: src/preferences_dialog.c:46
+msgid "Profile Generation"
+msgstr "Stvaranje profila"
+
+#: src/preferences_dialog.c:54
+msgid "Path"
+msgstr "Putanja"
+
+#: src/preferences_dialog.c:76
+msgid "YAST"
+msgstr "YAST"
+
+#: src/preferences_dialog.c:77
+msgid "genprof"
+msgstr "genprof"
+
+#: src/reject_list.c:58
+msgid "AppArmor Rejections"
+msgstr "AppArmor pravila za odbijanje"
+
--- a/deprecated/management/applets/apparmorapplet-gnome/po/hu.po
+++ b/deprecated/management/applets/apparmorapplet-gnome/po/hu.po
@@ -0,0 +1,52 @@
+# translation of apparmorapplet.hu.po to
+# Kalman Kemenczy <kkemenczy@novell.com>, 2007.
+msgid ""
+msgstr ""
+"Project-Id-Version: apparmorapplet.hu\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2007-02-06 14:27-0800\n"
+"PO-Revision-Date: 2007-08-12 14:47+0200\n"
+"Last-Translator: Kalman Kemenczy <kkemenczy@novell.com>\n"
+"Language-Team:  <hu@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.11.4\n"
+"Plural-Forms: Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: src/apparmor-applet.c:244
+msgid ""
+"AppArmorApplet is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2 of the License, or\n"
+"(at your option) any later version."
+msgstr ""
+"Az AppArmor kisalkalmazás szabad szoftver, terjesztheti és/vagy\n"
+"módosíthatja a Free Software Foundation által kiadott GNU\n"
+"General Public License második (vagy bármely későbbi)\n"
+"változatában foglaltak alapján."
+
+#: src/preferences_dialog.c:31
+msgid "AppArmor Desktop Preferences"
+msgstr "AppArmor munkaasztal beállításai"
+
+#: src/preferences_dialog.c:46
+msgid "Profile Generation"
+msgstr "Profillétrehozás"
+
+# clients/online_update_details.ycp:86 clients/online_update_select.ycp:108
+#: src/preferences_dialog.c:54
+msgid "Path"
+msgstr "Elérési útvonal"
+
+#: src/preferences_dialog.c:76
+msgid "YAST"
+msgstr "YAST"
+
+#: src/preferences_dialog.c:77
+msgid "genprof"
+msgstr "genprof"
+
+#: src/reject_list.c:58
+msgid "AppArmor Rejections"
+msgstr "AppArmor visszautasítások"
--- a/deprecated/management/applets/apparmorapplet-gnome/po/id.po
+++ b/deprecated/management/applets/apparmorapplet-gnome/po/id.po
@@ -0,0 +1,44 @@
+msgid ""
+msgstr ""
+"Project-Id-Version: @PACKAGE@\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2007-02-06 14:27-0800\n"
+"PO-Revision-Date: 2002-10-08 13:38+0200\n"
+"Last-Translator: I Made Wiryana <made@nakula.rvs.uni-bielefeld.de>\n"
+"Language-Team: Indonesian <i18n@suse.de>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+
+#: src/apparmor-applet.c:244
+msgid ""
+"AppArmorApplet is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2 of the License, or\n"
+"(at your option) any later version."
+msgstr ""
+
+#: src/preferences_dialog.c:31
+msgid "AppArmor Desktop Preferences"
+msgstr ""
+
+#: src/preferences_dialog.c:46
+msgid "Profile Generation"
+msgstr ""
+
+#: src/preferences_dialog.c:54
+msgid "Path"
+msgstr ""
+
+#: src/preferences_dialog.c:76
+msgid "YAST"
+msgstr ""
+
+#: src/preferences_dialog.c:77
+msgid "genprof"
+msgstr ""
+
+#: src/reject_list.c:58
+msgid "AppArmor Rejections"
+msgstr ""
--- a/deprecated/management/applets/apparmorapplet-gnome/po/it.po
+++ b/deprecated/management/applets/apparmorapplet-gnome/po/it.po
@@ -0,0 +1,43 @@
+# Copyright (C) 2006 SuSE Linux Products GmbH, Nuernberg
+# This file is distributed under the same license as the package.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: apparmorapplet\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2007-02-06 14:27-0800\n"
+"PO-Revision-Date: 2009-02-05 10:11\n"
+"Last-Translator: Novell Language <language@novell.com>\n"
+"Language-Team: Novell Language <language@novell.com>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: src/apparmor-applet.c:244
+msgid "AppArmorApplet is free software; you can redistribute it and/or modify\nit under the terms of the GNU General Public License as published by\nthe Free Software Foundation; either version 2 of the License, or\n(at your option) any later version."
+msgstr "AppArmorApplet è un software gratuito. È possibile ridistribuirlo e/o\nmodificarlo sotto i termini della GNU General Public Licence\npubblicati dalla Free Software Foundation: versione 2\ndella licenza oppure, a scelta, una versione successiva."
+
+#: src/preferences_dialog.c:31
+msgid "AppArmor Desktop Preferences"
+msgstr "Preferenze Desktop AppArmor"
+
+#: src/preferences_dialog.c:46
+msgid "Profile Generation"
+msgstr "Generazione del profilo"
+
+#: src/preferences_dialog.c:54
+msgid "Path"
+msgstr "Percorso"
+
+#: src/preferences_dialog.c:76
+msgid "YAST"
+msgstr "YAST"
+
+#: src/preferences_dialog.c:77
+msgid "genprof"
+msgstr "genprof"
+
+#: src/reject_list.c:58
+msgid "AppArmor Rejections"
+msgstr "Operazioni respinte da AppArmor"
+
--- a/deprecated/management/applets/apparmorapplet-gnome/po/ja.po
+++ b/deprecated/management/applets/apparmorapplet-gnome/po/ja.po
@@ -0,0 +1,43 @@
+# Copyright (C) 2006 SuSE Linux Products GmbH, Nuernberg
+# This file is distributed under the same license as the package.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: apparmorapplet\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2007-02-06 14:27-0800\n"
+"PO-Revision-Date: 2009-02-04 15:11\n"
+"Last-Translator: Novell Language <language@novell.com>\n"
+"Language-Team: Novell Language <language@novell.com>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: src/apparmor-applet.c:244
+msgid "AppArmorApplet is free software; you can redistribute it and/or modify\nit under the terms of the GNU General Public License as published by\nthe Free Software Foundation; either version 2 of the License, or\n(at your option) any later version."
+msgstr "AppArmorアプレットはフリーソフトウェアです。これを、Free Software\nFoundationが公開しているGNU General Public License(バージョン2か、希望によっては\nそれ以降のバージョンのうちどれか)の定める条件の下で再配布および/または変更することが\nできます。"
+
+#: src/preferences_dialog.c:31
+msgid "AppArmor Desktop Preferences"
+msgstr "AppArmorデスクトップ設定"
+
+#: src/preferences_dialog.c:46
+msgid "Profile Generation"
+msgstr "プロファイル生成"
+
+#: src/preferences_dialog.c:54
+msgid "Path"
+msgstr "パス"
+
+#: src/preferences_dialog.c:76
+msgid "YAST"
+msgstr "YaST"
+
+#: src/preferences_dialog.c:77
+msgid "genprof"
+msgstr "genprof"
+
+#: src/reject_list.c:58
+msgid "AppArmor Rejections"
+msgstr "AppArmorによる拒否"
+
--- a/deprecated/management/applets/apparmorapplet-gnome/po/ka.po
+++ b/deprecated/management/applets/apparmorapplet-gnome/po/ka.po
@@ -0,0 +1,50 @@
+msgid ""
+msgstr ""
+"Project-Id-Version: @PACKAGE@\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2007-02-06 14:27-0800\n"
+"PO-Revision-Date: 2008-09-25 17:51+0400\n"
+"Last-Translator: George Machitidze <giomac@gmail.com>\n"
+"Language-Team: Georgian <i18n@suse.de>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+
+#: src/apparmor-applet.c:244
+msgid ""
+"AppArmorApplet is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2 of the License, or\n"
+"(at your option) any later version."
+msgstr ""
+"AppArmorApplet არის თავისუფალი პროგრამული უზრუნველოყა;\n"
+"თქვენ შეგიძლიათ იგი გაავრცელოთ ან/და შეცვალოთ\n"
+"Free Software Foundation-ის მიერ გამოქვეყნაბული\n"
+"GNU General Public License ლიცენზიით; ან მეორე ვერსიით,\n"
+"ან უფრო ახალი ვერსიით (თქვენი არჩევანის მიხედვით)."
+
+#: src/preferences_dialog.c:31
+msgid "AppArmor Desktop Preferences"
+msgstr "AppArmor სამუშაო მაგიდის პარამეტრები "
+
+#: src/preferences_dialog.c:46
+msgid "Profile Generation"
+msgstr ""
+
+#: src/preferences_dialog.c:54
+msgid "Path"
+msgstr "გეზი"
+
+#: src/preferences_dialog.c:76
+msgid "YAST"
+msgstr "YAST"
+
+#: src/preferences_dialog.c:77
+msgid "genprof"
+msgstr "genprof"
+
+#: src/reject_list.c:58
+msgid "AppArmor Rejections"
+msgstr "AppArmor-ის უარყოფები"
+
--- a/deprecated/management/applets/apparmorapplet-gnome/po/km.po
+++ b/deprecated/management/applets/apparmorapplet-gnome/po/km.po
@@ -0,0 +1,52 @@
+# translation of apparmorapplet.km.po to Khmer
+# Khoem Sokhem <khoemsokhem@khmeros.info>, 2007.
+msgid ""
+msgstr ""
+"Project-Id-Version: apparmorapplet.km\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2007-02-06 14:27-0800\n"
+"PO-Revision-Date: 2007-08-13 14:34+0700\n"
+"Last-Translator: Khoem Sokhem <khoemsokhem@khmeros.info>\n"
+"Language-Team: Khmer <support@khmeros.info>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+"X-Generator: KBabel 1.11.4\n"
+
+#: src/apparmor-applet.c:244
+msgid ""
+"AppArmorApplet is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2 of the License, or\n"
+"(at your option) any later version."
+msgstr ""
+"AppArmorApplet គឺជាកម្មវិធីឥតគិតថ្លៃ អ្នកអាចចែកចាយវា និង/ឬកែប្រែបាន\n"
+"ប៉ុន្តែត្រូវនៅក្រោមអាជ្ញាបណ្ណ GNU ព្រោះថាបានបោះពុម្ពផ្សាយដោយ\n"
+"មូលនិធិកម្មវិធីឥតគិតថ្លៃ កំណែ ២ របស់អាជ្ញាបណ្ណ ឬ\n"
+"(ជម្រើសរបស់អ្នក) នៅកំណែក្រោយ ។"
+
+#: src/preferences_dialog.c:31
+msgid "AppArmor Desktop Preferences"
+msgstr "ចំណូលចិត្តផ្ទៃតុរបស់ AppArmor"
+
+#: src/preferences_dialog.c:46
+msgid "Profile Generation"
+msgstr "ការបង្កើតទម្រង់"
+
+#: src/preferences_dialog.c:54
+msgid "Path"
+msgstr "ផ្លូវ"
+
+#: src/preferences_dialog.c:76
+msgid "YAST"
+msgstr "YAST"
+
+#: src/preferences_dialog.c:77
+msgid "genprof"
+msgstr "genprof"
+
+#: src/reject_list.c:58
+msgid "AppArmor Rejections"
+msgstr "ការច្រាន AppArmor ចេញ"
+
--- a/deprecated/management/applets/apparmorapplet-gnome/po/ko.po
+++ b/deprecated/management/applets/apparmorapplet-gnome/po/ko.po
@@ -0,0 +1,43 @@
+# Copyright (C) 2006 SuSE Linux Products GmbH, Nuernberg
+# This file is distributed under the same license as the package.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: apparmorapplet\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2007-02-06 14:27-0800\n"
+"PO-Revision-Date: 2009-02-04 15:02\n"
+"Last-Translator: Novell Language <language@novell.com>\n"
+"Language-Team: Novell Language <language@novell.com>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: src/apparmor-applet.c:244
+msgid "AppArmorApplet is free software; you can redistribute it and/or modify\nit under the terms of the GNU General Public License as published by\nthe Free Software Foundation; either version 2 of the License, or\n(at your option) any later version."
+msgstr "AppArmorApplet은 무료 소프트웨어이며, 배포하거나\nFSF(Free Software Foundation)에서 발행한 GNU GPL(General Public License: 버전 2 또는 (사용자 재량으로)\n이후 버전) 약관 하에서 수정할 수 있습니다. "
+
+#: src/preferences_dialog.c:31
+msgid "AppArmor Desktop Preferences"
+msgstr "AppArmor 데스크톱 기본 설정"
+
+#: src/preferences_dialog.c:46
+msgid "Profile Generation"
+msgstr "프로파일 생성"
+
+#: src/preferences_dialog.c:54
+msgid "Path"
+msgstr "경로"
+
+#: src/preferences_dialog.c:76
+msgid "YAST"
+msgstr "YAST"
+
+#: src/preferences_dialog.c:77
+msgid "genprof"
+msgstr "genprof"
+
+#: src/reject_list.c:58
+msgid "AppArmor Rejections"
+msgstr "AppArmor 거부"
+
--- a/deprecated/management/applets/apparmorapplet-gnome/po/lo.po
+++ b/deprecated/management/applets/apparmorapplet-gnome/po/lo.po
@@ -0,0 +1,44 @@
+msgid ""
+msgstr ""
+"Project-Id-Version: @PACKAGE@\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2007-02-06 14:27-0800\n"
+"PO-Revision-Date: 2006-01-04 08:58+0100\n"
+"Last-Translator: i18n@suse.de\n"
+"Language-Team: Lao <i18n@suse.de>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=n != 1;\n"
+
+#: src/apparmor-applet.c:244
+msgid ""
+"AppArmorApplet is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2 of the License, or\n"
+"(at your option) any later version."
+msgstr ""
+
+#: src/preferences_dialog.c:31
+msgid "AppArmor Desktop Preferences"
+msgstr ""
+
+#: src/preferences_dialog.c:46
+msgid "Profile Generation"
+msgstr ""
+
+#: src/preferences_dialog.c:54
+msgid "Path"
+msgstr ""
+
+#: src/preferences_dialog.c:76
+msgid "YAST"
+msgstr ""
+
+#: src/preferences_dialog.c:77
+msgid "genprof"
+msgstr ""
+
+#: src/reject_list.c:58
+msgid "AppArmor Rejections"
+msgstr ""
--- a/deprecated/management/applets/apparmorapplet-gnome/po/lt.po
+++ b/deprecated/management/applets/apparmorapplet-gnome/po/lt.po
@@ -0,0 +1,49 @@
+# Copyright (C) 2006, SUSE Linux GmbH, Nuremberg
+# Andrius Štikonas <stikonas@gmail.com>, 2007.
+# This file is distributed under the same license as AppArmorApplet package.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: AppArmorApplet\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2007-02-06 14:27-0800\n"
+"PO-Revision-Date: 2007-08-19 19:59+0300\n"
+"Last-Translator: Andrius Štikonas <stikonas@gmail.com>\n"
+"Language-Team: Lithuanian <i18n@suse.de>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && (n%100<10 || n%100>=20) ? 1 : 2;\n"
+
+#: src/apparmor-applet.c:244
+msgid ""
+"AppArmorApplet is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2 of the License, or\n"
+"(at your option) any later version."
+msgstr ""
+
+#: src/preferences_dialog.c:31
+msgid "AppArmor Desktop Preferences"
+msgstr "AppArmor darbastalio nustatymai"
+
+#: src/preferences_dialog.c:46
+msgid "Profile Generation"
+msgstr "Profilio generavimas"
+
+#: src/preferences_dialog.c:54
+msgid "Path"
+msgstr "Kelias"
+
+#: src/preferences_dialog.c:76
+msgid "YAST"
+msgstr "YAST"
+
+#: src/preferences_dialog.c:77
+msgid "genprof"
+msgstr ""
+
+#: src/reject_list.c:58
+msgid "AppArmor Rejections"
+msgstr ""
+
--- a/deprecated/management/applets/apparmorapplet-gnome/po/mk.po
+++ b/deprecated/management/applets/apparmorapplet-gnome/po/mk.po
@@ -0,0 +1,48 @@
+# Macedonian message file for YaST2 (@memory@).
+# Copyright (C) 2006 SUSE Linux Products GmbH.
+# Зоран Димовски <zoki.dimovski@gmail.com>
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: YaST (@memory@)\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2007-02-06 14:27-0800\n"
+"PO-Revision-Date: 2001-07-17 16:12+0200\n"
+"Last-Translator: Зоран Димовски <zoki.dimovski@gmail.com>\n"
+"Language-Team: Macedonian <i18n@suse.de>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=3; plural=(n>1);\n"
+
+#: src/apparmor-applet.c:244
+msgid ""
+"AppArmorApplet is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2 of the License, or\n"
+"(at your option) any later version."
+msgstr ""
+
+#: src/preferences_dialog.c:31
+msgid "AppArmor Desktop Preferences"
+msgstr ""
+
+#: src/preferences_dialog.c:46
+msgid "Profile Generation"
+msgstr ""
+
+#: src/preferences_dialog.c:54
+msgid "Path"
+msgstr ""
+
+#: src/preferences_dialog.c:76
+msgid "YAST"
+msgstr ""
+
+#: src/preferences_dialog.c:77
+msgid "genprof"
+msgstr ""
+
+#: src/reject_list.c:58
+msgid "AppArmor Rejections"
+msgstr ""
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Steve Beattie	daa141d65f	Merge from trunk rev 1475: fixSubDomain.pm to take truncate, rename_src, rename_dest, and mkdir operations into account, as well as add logparsing library testcases for those operations. Bug: https://bugs.launchpad.net/apparmor/+bug/623467 Nominated-by: Steve Beattie <sbeattie@ubuntu.com> Acked-By: Steve Beattie <sbeattie@ubuntu.com>	2010-09-21 00:40:50 -07:00
Steve Beattie	0c8f6e642c	Fix minor build warning on rpm based systems.	2010-09-20 11:40:32 -07:00
Steve Beattie	b9172f195d	When loading without the 2.4 compatibility patch, the parser needs the following patch or it will explode when it can't find the "features" file. Bug: https://bugs.launchpad.net/ubuntu/+source/apparmor/+bug/626984 Nominated-by: Kees Cook <kees@ubuntu.com> Acked-By: Steve Beattie <sbeattie@ubuntu.com>	2010-09-16 10:13:11 -07:00
Steve Beattie	fc15748264	Fix bzr export command to retain the timestamps from commits, rather than using the time the export occurred.	2010-09-16 05:37:53 -07:00
Steve Beattie	f86f4cc67c	Pull outdated kernel patches, to avoid confusion. Add README to note that links to the patches will be posted to the wiki and the mailing list. Nominated-by: Steve Beattie <sbeattie@ubuntu.com> Acked-By: John Johansen <john.johansen@canonical.com> (on irc)	2010-09-16 02:25:59 -07:00
Steve Beattie	745eebb2b3	Prepare for 2.5.1 rc2 and hopefully final release.	2010-09-15 15:10:42 -07:00
Steve Beattie	266800554b	Merge from trunk rev 1501: Reorder the timstamp check to move it to the beginning of the script and add an additional sleep before the parser invocation that generates the cache file for the first time. Submitted-by: Steve Beattie <sbeattie@ubuntu.com> Acked-By: Kees Cook <kees@ubuntu.com>	2010-09-15 14:37:53 -07:00
Steve Beattie	be77957326	Merge from trunk revs 1495 and 1496: Update how cache validation is done to fix the bug where abstraction updates do not cause the cache file to become invalid. Nominated-by: John Johansen <john.johansen@canonical.com> Acked-By: Steve Beattie <sbeattie@ubuntu.com>	2010-09-15 12:01:21 -07:00
Steve Beattie	dba072c530	Merge from trunk rev 1498: Fix write_cache to not be a privileged operation so that the caching tests can be added to the build. Update caching tests to detect non-ns-resolution filesystems and back off on the timing test. Nominated-by: Kees Cook <kees.cook@canonical.com> Acked-By: Steve Beattie <sbeattie@ubuntu.com>	2010-09-15 11:34:38 -07:00
Steve Beattie	c2109f2c3b	Cherry picked elements from trunk commit 1437: fix serious compiler warnings, silence an error in non-rpm build environs. Nominated-by: Steve Beattie <sbeattie@ubuntu.com> Acked-By: Kees Cook <kees@ubuntu.com>	2010-09-15 10:24:55 -07:00
Steve Beattie	9578c217cb	Much pared down version of trunk commit 1497: fix error checking so that caching will work without needing kernel_load. Nominated-by: Kees Cook <kees.cook@canonical.com> Acked-By: Steve Beattie <sbeattie@ubuntu.com>	2010-09-15 09:33:01 -07:00
Jamie Strandboge	24bf1faaac	exported smbd files need to have 'k' to work properly with certain applications	2010-09-14 14:17:53 -05:00
Steve Beattie	604b6b10b1	Fix up one little issue with the repo version bit when building outside of the repo tree.	2010-09-13 01:37:04 -07:00
Steve Beattie	71cda52995	Point the repo target at the correct published tree.	2010-09-12 12:59:05 -07:00
Steve Beattie	2a3967f7f7	Modify the version determining stuff to work with bzr, update the toplevel tarball make target to create a release tarball and make a snapshot target to do the same thing for snapshot releases.	2010-09-12 12:56:51 -07:00
Steve Beattie	5308974d27	Preparation for 2.5.1 rc1 release.	2010-09-10 15:11:25 -07:00
Steve Beattie	0c754fe701	Merge from trunk rev 1411: network interface enumeration Nominated-by: Jamie Strandboge <jamie@canonical.com> Acked-By: Steve Beattie <sbeattie@ubuntu.com>	2010-09-10 13:19:38 -07:00
Steve Beattie	eeb523ab16	Merge from trunk rev 1410: update for font/icon/mime locations in current gnome. Nominated-by: Jamie Strandboge <jamie@canonical.com> Acked-By: Steve Beattie <sbeattie@ubuntu.com>	2010-09-10 13:18:28 -07:00
Steve Beattie	90e414f0ab	Merge from trunk rev 1467: Add gdm files to X abstraction. Nominated-by: Jamie Strandboge <jamie@canonical.com> Acked-By: Steve Beattie <sbeattie@ubuntu.com>	2010-09-10 13:13:56 -07:00
Jamie Strandboge	6ec327cfb9	tests/regression/subdomain/uservars.inc: apply the uservars.inc change in trunk's r1458 too	2010-09-10 13:30:25 -05:00
Jamie Strandboge	15f61e5e5b	profiles/apparmor.d/abstractions/ubuntu-email: add thunderbird 3 profiles/apparmor.d/abstractions/ubuntu-media-players: add gmplayer profiles/apparmor.d/abstractions/ubuntu-*: use PUx instead of Ux	2010-09-10 10:28:28 -05:00
Steve Beattie	d4e0f472e2	Merge from trunk rev 1492: add testcases to support previous merges.	2010-09-10 00:46:03 -07:00
Steve Beattie	e89ef114bf	Merge from trunk rev 1490: newer apparmor module uses target instead of name2, add log parsing support for this. Nominated-by: John Johansen <john.johansen@canonical.com> Acked-By: Steve Beattie <sbeattie@ubuntu.com>	2010-09-10 00:40:59 -07:00
Steve Beattie	48587d7179	Merge from trunk rev 1489: Status messages have and offset field used to debug why and where a policy load failed. For now just ignore it. Nominated-by: John Johansen <john.johansen@canonical.com> Acked-By: Steve Beattie <sbeattie@ubuntu.com>	2010-09-10 00:39:16 -07:00
Steve Beattie	8e39e3ab86	Merge from trunk rev 1491: Change the second key_capability entry into a comment and document why its there and what to do with it once the old entry types are cleaned up. Nominated-by: John Johansen <john.johansen@canonical.com> Acked-By: Steve Beattie <sbeattie@ubuntu.com>	2010-09-10 00:36:33 -07:00
Steve Beattie	fbd1ab065e	Merge from trunk rev 1487: Add support for the added capability and capname fields in LSM_AUDIT records; For now just use capname and silently drop capability when it is found. Nominated-by: John Johansen <john.johansen@canonical.com> Acked-By: Steve Beattie <sbeattie@ubuntu.com>	2010-09-10 00:33:44 -07:00
Steve Beattie	d41f723645	Merge from trunk rev 1435 (+ creation of empty .err files): Update log parser grammar to handle new LSM-audit log messages. Add testcases for new LSM-audit log messages. Nominated-by: Steve Beattie <sbeattie@ubuntu.com> Acked-By: Kees Cook <kees@ubuntu.com>	2010-09-10 00:18:39 -07:00
Steve Beattie	808bda6792	Merge from trunk rev 1488: handle negative error codes in error= fields. Nominated-by: John Johansen <john.johansen@canonical.com> Acked-By: Steve Beattie <sbeattie@ubuntu.com>	2010-09-09 18:38:18 -07:00
Steve Beattie	914f9f5bad	Merge from trunk rev 1486: If encountered the scanner will dump unmatched text from <audit_id>. Nominated-by: John Johansen <john.johansen@canonical.com> Acked-By: Steve Beattie <sbeattie@ubuntu.com>	2010-09-09 15:16:36 -07:00
Steve Beattie	cea0cdb4e9	Merge from trunk rev 1485: Fix apparmor_notify memory leak for non-reported messages. Nominated-by: John Johansen <john.johansen@canonical.com> Acked-By: Steve Beattie <sbeattie@ubuntu.com>	2010-09-09 11:28:04 -07:00
Steve Beattie	f12a20dcae	Merge of trunk rev 1484: change notify.conf to default to enabling apparmor_notify. Nominated-by: John Johansen <john.johansen@canonical.com> Acked-By: Steve Beattie <sbeattie@ubuntu.com>	2010-09-09 11:25:36 -07:00
Jamie Strandboge	e843ad3457	cherrypick r1483 from trunk: allow mmap of font cache files in @{HOME}/.fontconfig/ for sun-java6	2010-09-08 13:58:37 -05:00
Jamie Strandboge	9333e221bc	update fonts abstraction to add '/var/lib/ghostscript/** r,'	2010-09-03 08:42:29 -05:00
Jamie Strandboge	523738348c	merge from trunk: abstractions/ubuntu-browsers: add '/usr/bin/sensible-browser PUxr'	2010-08-30 11:11:34 -05:00
Steve Beattie	8b79fb5fea	Merge from trunk revs 1476, 1477, and 1478: cope with various elements that the upstream 2.6.36 kernel is missing. All Nominated-by: John Johansen <john.johansen@canonical.com> Acked-By: Steve Beattie <sbeattie@ubuntu.com>	2010-08-26 11:24:41 -07:00
Steve Beattie	8878869a0c	Modified version of trunk rev 1473: This teaches pam_apparmor about the current errno returned by the kernel when the hat that was passed does not exist in the profile (but other hats exist). (LP: #619521) It differs to the fix in trunk in that, to be more conservative in the change, it does not remove the EPERM case, even though it should not be needed anymore. Nominated-by: Steve Beattie <sbeattie@ubuntu.com> Acked-By: Kees Cook <kees@ubuntu.com>	2010-08-19 08:45:19 -07:00
Steve Beattie	5fe2fc0c3f	Merge from trunk r1462: remove kde4-config from the kde abstraction Nominated-by: Jamie Strandboge <jamie@canonical.com> Acked-By: Steve Beattie <sbeattie@ubuntu.com>	2010-08-11 12:06:38 -07:00
Steve Beattie	25f5cc50b3	Merge from trunk r1466: add ca-certificates to ssl_certs abstraction (LP: #605835) Nominated-by: Jamie Strandboge <jamie@canonical.com> Acked-By: Steve Beattie <sbeattie@ubuntu.com>	2010-08-11 12:02:36 -07:00
Steve Beattie	72141e5a6e	Merge r1457 from trunk: 'owner' match in commit 1406 too strict for /tmp/ and /var/tmp/ (LP: #615177) Nominated-by: Jamie Strandboge <jamie@canonical.com> Acked-By: Steve Beattie <sbeattie@ubuntu.com>	2010-08-10 09:12:34 -07:00
Steve Beattie	d323db562a	Merge revs 1403, 1417, 1447 from trunk: * add dbus-session abstraction (and use Pix rather than Uix) * fix gnome abstraction for gdk pixbuf loaders (LP: #611248) Nominated by: Jamie Strandboge <jamie@canonical.com> Acked-By: Steve Beattie <sbeattie@ubuntu.com>	2010-08-05 10:44:08 -07:00
Steve Beattie	030d97e3f1	Merge from r1430: fix for LP: #599450 Changes the table resizing so that there is always sufficient high entries in the table, preventing bounds violations from occurring. Nominated-by: John Johansen <john.johansen@canonical.com> Acked-By: Steve Beattie <sbeattie@ubuntu.com>	2010-07-24 16:16:14 +02:00
Steve Beattie	0eb5d7c050	Merge from r1429: combine the two separate table resize code segments into a single functionally equivalent segment. Nominated-by: John Johansen <john.johansen@canonical.com> Acked-By: Steve Beattie <sbeattie@ubuntu.com>	2010-07-24 16:09:25 +02:00
Steve Beattie	1c1de08f11	Partial merge r1419: add the -p flag to support the output of flattened profiles. Submitted-by: John Johansen <john.johansen@canonical.com> Acked-By: Steve Beattie <sbeattie@ubuntu.com>	2010-07-17 18:39:37 -07:00
Steve Beattie	6dad83c212	Merge r1387: Fix perl swig bindings so that libapparmor can be built when configured without perl. Nominated-by: Steve Beattie <sbeattie@ubuntu.com> Acked-By: Marc Deslauriers <marc.deslauriers@canonical.com>	2010-07-13 16:38:39 -07:00
Steve Beattie	1ad455c6da	Merge r1385: Fix memory leak during dfa minimization. Nominated-by: Steve Beattie <sbeattie@ubuntu.com> Acked-By: Marc Deslauriers <marc.deslauriers@canonical.com>	2010-07-13 16:36:47 -07:00
Steve Beattie	b5c8c2bdaf	Merge r1379: Fix leaking file descriptors on included files. Nominated-by: Steve Beattie <sbeattie@ubuntu.com> Acked-By: Marc Deslauriers <marc.deslauriers@canonical.com>	2010-07-13 16:31:57 -07:00
Steve Beattie	ac1a585bbe	Merge from trunk rev 1424: Move expression tree node labeling into expr node themselves to reduce memory usage and make node labeling per dfa rather than global. Nominated-by: John Johansen <john.johansen@canonical.com> Acked-By: Steve Beattie <sbeattie@ubuntu.com>	2010-07-12 15:53:51 -07:00
Steve Beattie	8187d02864	Merge in rev 1422 from trunk: Cleaning up the sets firstpos, lastpos, and followpos early reduces peak memory usage. Nominated-by: John Johansen <john.johansen@canonical.com> Acked-By: Steve Beattie <sbeattie@ubuntu.com>	2010-07-12 15:28:26 -07:00
Steve Beattie	8525087270	Merge in r1413 and r1418: report correct filename/line number on errors in the parser. r1413 Nominated-by: Kees Cook <kees@ubuntu.com> r1413 Acked-By: Steve Beattie <sbeattie@ubuntu.com> r1418 Nominated-by: Steve Beattie <sbeattie@ubuntu.com> r1418 Acked-By: Kees Cook <kees@ubuntu.com> r1418 Acked-By: John Johansen <john.johansen@canonical.com>	2010-06-25 12:58:17 -07:00
Steve Beattie	26624648f8	apparmor_notify merges: r1391-r1396,r1401-r1402,r1405,r1407-r1408: These commits should bring apparmor_notify and apparmor_notify.pod up to what is in trunk. In short: - add long options - cleanup output - better handle auditd - handle logfile rotation - use seteuid() to drop privileges so we can raise/drop after log file rotation. Add -u USER option for dropping privileges when not using sudo - man page updates - group like entries together when using -v with -s (and later cleanups including LP: #582075) Nominated-by: Jamie Strandboge <jamie@canonical.com> Acked-By: Steve Beattie <sbeattie@ubuntu.com>	2010-06-21 15:36:21 -07:00
Steve Beattie	6f7dad8790	Merge: r1389: add 'k' to /var/lib/samba/**.tdb in the samba abstraction Nominated-by: Jamie Strandboge <jamie@canonical.com> Acked-By: Steve Beattie <sbeattie@ubuntu.com>	2010-06-21 15:26:22 -07:00
Steve Beattie	f0d5b09b9f	Merge: r1397-r1398: adjust cgi path for php5 abstraction (LP: #538661 ) Nominated-by: Jamie Strandboge <jamie@canonical.com> Acked-By: Steve Beattie <sbeattie@ubuntu.com>	2010-06-21 15:24:35 -07:00
Steve Beattie	ab10eafaaf	Merge r1406: abstractions/user-tmp: require 'owner' matching Nominated-by: Jamie-Strandboge <jamie@canonical.com> Acked-By: Steve Beattie <sbeattie@ubuntu.com>	2010-06-21 15:22:54 -07:00
Steve Beattie	aa106808fd	Merge: r1409: statvfs allowed by default Nominated-by: Jamie Strandboge <jamie@canonical.com> Acked-By: Steve Beattie <sbeattie@ubuntu.com>	2010-06-21 15:21:10 -07:00