samba-dcerpcd requires access to `/var/cache/samba/names.tdb`.
audit: type=1400 audit(1676835286.187:62): apparmor="DENIED" operation="open" profile="samba-dcerpcd" name="/var/cache/samba/names.tdb" pid=6948 comm="samba-dcerpcd" requested_mask="wrc" denied_mask="wrc" fsuid=0 ouid=0
See also https://bbs.archlinux.org/viewtopic.php?id=281411
Since `usr.sbin.winbindd` already has a rule for it, and `usr.sbin.nmbd`
has similar ones, simply add `/var/cache/samba/*.tdb rwk` to
`abstractions/samba`.
(cherry picked from commit 763c4ecd23,
with cleanup of now-superfluous rules in usr.sbin.nmbd and
usr.sbin.winbindd dropped)
Also allow access to samba pid files directly in /run/
This is a backport of !987, with the cleanup of now-superfluous rules removed.
I propose this patch for 3.x (also for 2.13 if it cleanly applies)
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/988
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
On Arch Linux, `samba-dcerpcd.pid` is in `/run/`, not `/run/samba/`.
apparmor="DENIED" operation="mknod" profile="samba-dcerpcd" name="/run/samba-dcerpcd.pid" pid=80920 comm="samba-dcerpcd" requested_mask="c" denied_mask="c" fsuid=0 ouid=0
The same is true for `nmbd.pid`, `smbd.pid` and probably others too.
(cherry picked from commit 6f0d2ef7fe)
samba-dcerpcd requires access to `/var/cache/samba/names.tdb`.
audit: type=1400 audit(1676835286.187:62): apparmor="DENIED" operation="open" profile="samba-dcerpcd" name="/var/cache/samba/names.tdb" pid=6948 comm="samba-dcerpcd" requested_mask="wrc" denied_mask="wrc" fsuid=0 ouid=0
See also https://bbs.archlinux.org/viewtopic.php?id=281411
Since `usr.sbin.winbindd` already has a rule for it, and `usr.sbin.nmbd`
has similar ones, simply add `/var/cache/samba/*.tdb rwk` to
`abstractions/samba`.
(cherry picked from commit 763c4ecd23,
with cleanup of now-superfluous rules in usr.sbin.nmbd and
usr.sbin.winbindd dropped)
In order to decrease the number of characters in the audit logs
from the kernel, we will drop the "_mask" from the fields
"requested_mask" and "denied_mask".
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
(cherry picked from commit a05c9483f3)
Signed-off-by: John Johansen <john.johansen@canonical.com>
Resolves#292.
This fix is the same as !830 but for Brave.
Opening links in Brave now works as intended.
Note that now a separate denial is caused, related to WidevineCDM, is produced:
```
[ERROR:content_main_runner_impl.cc(415)] Unable to load CDM /home/username/.config/BraveSoftware/Brave-Browser/WidevineCdm/4.10.2557.0/_platform_specific/linux_x64/libwidevinecdm.so (error: /home/username/.config/BraveSoftware/Brave-Browser/WidevineCdm/4.10.2557.0/_platform_specific/linux_x64/libwidevinecdm.so: failed to map segment from shared object)
```
In the syslog:
```
audit: type=1400 audit(1671108748.090:117): apparmor="DENIED" operation="file_mmap" profile="/usr/bin/evince//sanitized_helper" name="/home/username/.config/BraveSoftware/Brave-Browser/WidevineCdm/4.10.2557.0/_platform_specific/linux_x64/libwidevinecdm.so" pid=65765 comm="brave" requested_mask="m" denied_mask="m" fsuid=1000 ouid=100
```
I'm not sure if granting permission(s) for this is desirable. In either case, the potential relevant changes are out of the scope of this MR.
If I disable WidevineCDM in Brave, I get the following denial on cap sys_admin:
```
audit: type=1400 audit(1671112807.666:174): apparmor="DENIED" operation="capable" profile="/usr/bin/evince//sanitized_helper" pid=112098 comm="brave" capability=21 capname="sys_admin"
```
which is fine, as mentioned by @jjohansen [here](https://gitlab.com/apparmor/apparmor/-/merge_requests/830#note_831915024).
Closes#292
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/957
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
(cherry picked from commit 5fd8c25745)
Signed-off-by: John Johansen <john.johansen@canonical.com>
- ssl_certs: /{etc,usr/share}/pki/trust/ has more than the 'anchors' subdirectory
- crypoto: allow reading /etc/gcrypt/hwf.deny
I propose this patch for 3.0..master (2.13 doesn't have abstractions/crypto).
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/961
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
(cherry picked from commit bb30df7843)
d15bfa99 Extend crypto and ssl_certs abstractions
Glibc in 2.36 and later will [1] access sysfs at
/sys/devices/system/cpu/possible when usig sysconf
for _SC_NPROCESSORS_CONF.
That will make a lot of different code, for example
anything linked against libnuma, trigger this apparmor
denial.
apparmor="DENIED" operation="open" class="file" ...
name="/sys/devices/system/cpu/possible" ...
requested_mask="r" denied_mask="r" fsuid=0 ouid=0

This entry seems rather safe, and it follows others
that are already in place. Instead of fixing each
software individually this should go into the base
profile as well.
Initially reported via
https://bugs.launchpad.net/ubuntu/+source/apparmor/+bug/1989073
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/267
MR: none - ML
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
(cherry picked from commit c159d0925a)
Signed-off-by: John Johansen <john.johansen@canonical.com>
When WSL automatically generates a resolv.conf for an instance, the /etc/resolv.conf file is a symlink to /mnt/wsl/resolv.conf. This patch adds an entry for this to the other policies to handle such management.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/935
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
(cherry picked from commit 8fa77e9e6c)
5232eaa2 Adds /mnt/wsl/resolv.conf to nameservices.
`codecs.open()` splits lines at unexpected characters like 0x1d.
Switch `open_file_*()` to use `open()` which does not have this problem.
(Note: 3.1 and master already use `open()`.)
This fixes the test failure introduced in the 3.0 branch in commit
ea681c4638 which contains an example log
with a 0x1d character.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/945
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
`codecs.open()` splits lines at unexpected characters like 0x1d.
Switch `open_file_*()` to use `open()` which does not have this problem.
(Note: 3.1 and master already use `open()`.)
This fixes the test failure introduced in the 3.0 branch in commit
ea681c4638 which contains an example log
with a 0x1d character.
... instead of slicing to check for prefixes and suffixes.
This change prevents a crash in aa-mergeprof - if `replacement` is empty,
trying to access `replacement[0]` causes an IndexError.
Using `.startswith()` works without crashing.
This backports parts of the severity.py changes in
commit 091c6ad59d
by Mark Grassi.
I propose this fix for 2.13 and 3.0. (3.1 and master already have this fix.)
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/931
Approved-by: Jon Tourville <jon.tourville@canonical.com>
Merged-by: Christian Boltz <apparmor@cboltz.de>
... instead of slicing to check for prefixes and suffixes.
This change prevents a crash in aa-mergeprof - if `replacement` is empty,
trying to access `replacement[0]` causes an IndexError.
Using `.startswith()` works without crashing.
This backports parts of the severity.py changes in
commit 091c6ad59d
by Mark Grassi.
Note: This was reported for /usr/libexec/libvirt_leaseshelper, but since
this is probably unrelated to the path or a path change, this commit
also adds r permissions for the previous path.
Fixes: https://bugzilla.opensuse.org/show_bug.cgi?id=1202161
I propose this patch for 3.0 and master (optionally also for 2.12 and 2.13 - please tell me if you want that after reviewing the patch, or just merge ;-)
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/905
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
(cherry picked from commit f51049ea2e)
c9c5208f dnsmasq: Add missing r permissions for libvirt_leaseshelper
Abstractions should not generally include deny rules as this can unduly
constrain profiles which include them due to the precedent matching rules
between deny vs allow rules. Also as per the comment, this is not required
for exo-open to work, so simply omit it from the abstraction for
now. Finally, in Ubuntu, the evince profile includes the exo-open
abstraction and this deny rule causes evince to fail to initialise
correctly as it then assumes it cannot use gvfs.
Signed-off-by: Alex Murray <alex.murray@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/884
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
(cherry picked from commit d7e3f33aa8)
Signed-off-by: John Johansen <john.johansen@canonical.com>
This is a manual backport of
728dbde5e4 by Mark Grassi
For the records: the inconsistent return length was introduced when
splitting run_tests() into two functions in
500cbf89a7
The inverse character set lists the characters it doesn't match. If
the inverse character set contains an oob then that is NOT considered
a match. So length should be one.
However because of oobs are handle not containing an oob doesn't mean
there is a match either. Currently the only way to match an oob is
via a positive express (no inverse matches are possible).
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/872
Signed-off-by: John Johansen <john.johansen@canonical.com>
I noticed that some apps return the following errors when launched:
```
kernel: audit: type=1400 audit(1651244478.255:5501): apparmor="DENIED" operation="open" profile="some_app" name="/sys/devices/pci0000:00/0000:00:02.0/revision" pid=1877976 comm="some_app" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
kernel: audit: type=1400 audit(1651244478.255:5502): apparmor="DENIED" operation="open" profile="some_app" name="/sys/devices/pci0000:00/0000:00:02.0/config" pid=1877976 comm="some_app" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
```
Blocking the files results in the following errors when the app is executed in a terminal:
```
MESA: error: Failed to query drm device.
libGL error: failed to create dri screen
libGL error: failed to load driver: crocus
MESA: error: Failed to query drm device.
libGL error: failed to create dri screen
libGL error: failed to load driver: crocus
```
Since they have something to do with MESA, I think the mesa abstraction should
be updated to fix the issue.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/879
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Without the change apparmor build fails on this week's gcc-13 snapshot as:
capability.h:66:6: error: variable or field '__debug_capabilities' declared void
66 | void __debug_capabilities(uint64_t capset, const char *name);
| ^~~~~~~~~~~~~~~~~~~~
capability.h:66:27: error: 'uint64_t' was not declared in this scope
66 | void __debug_capabilities(uint64_t capset, const char *name);
| ^~~~~~~~
capability.h:23:1: note: 'uint64_t' is defined in header '<cstdint>'; did you forget to '#include <cstdint>'?
22 | #include <linux/capability.h>
+++ |+#include <cstdint>
23 |
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/882
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Signed-off-by: John Johansen <john.johansen@canonical.com>
The snap_browsers abstraction requires more permissions
due to updates on snaps.
Some of the permissions are not required in older versions of
Ubuntu that use 2.12 and 2.13, but are introduced for unification
and ease of maintenance purposes. These include:
```
all dbus permissions,
@{PROC}/sys/kernel/random/uuid r,
owner @{PROC}/@{pid}/cgroup r,
/var/lib/snapd/sequence/{chromium,firefox,opera}.json r,
```
I also propose a cherry-pick of this commit to 2.12, 2.13 and 3.0
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/877
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
(cherry picked from commit bfa67b369d)
Signed-off-by: John Johansen <john.johansen@canonical.com>
samba-4.16 has a completely new dcerpc subsystem, services that
used to be built into the smbd daemon itself (and deployed in forked
instances) are now hosted in standalone binaries. The following new
binaries now need new profiles
rpcd_classic
rpcd_epmapper
rpcd_fsrvp
rpcd_lsad
rpcd_mdssvc
rpcd_rpcecho
rpcd_spoolss
rpcd_winreg
samba-dcerpcd
Additionally smbd & winbindd need new entries because the exec
samba-dcerpcd
Signed-off-by: Noel Power <noel.power@suse.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/871
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: Christian Boltz <apparmor@cboltz.de>
(cherry picked from commit 3d27977b1c)
c785bcbe profiles/apparmor.d: Add new profiles needed for samba-4.16
systemd will attempt to force socket buffer size using setsockopt
and param SO_SNDBUFFORCE (which require net_admin cap) if it's previous
attempt to set size was clipped by kernel limit.
- Silence 'type=AVC msg=audit(1648725005.727:201): apparmor="DENIED" operation="capable" profile="smbd" pid=3054 comm="smbd" capability=12 capname="net_admin"'
type entries.
Signed-off-by: Noel Power <noel.power@suse.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/867
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
(cherry picked from commit 4537a5014b)
Signed-off-by: John Johansen <john.johansen@canonical.com>
similar to commit 2f9d172c64
we discovered that there was a service outage
when dovecot tried to send a usr1 signal
type=AVC msg=audit(1648024138.249:184964): apparmor="DENIED" operation="signal" profile="dovecot" pid=1690 comm="dovecot" requested_mask="send" denied_mask="send" signal=usr1 peer="dovecot-imap-login"
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/865
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: Christian Boltz <apparmor@cboltz.de>
(cherry picked from commit 83685ba703)
f0919f83 Allow dovecot to use all signals
- add pki/blacklist and pki/blocklist
- add /usr/share/pki/ in adddition to /etc/pki/
pki/blocklist was suggested by @darix, the other changes are things I noticed while adding it.
I propose this patch for 3.0 and master. (`abstractions/ssl_certs` on 2.x branches is quite different and needs a manual backport (or more cherry-picks) if you want to backport this MR.)
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/864
Approved-by: Jon Tourville <jon.tourville@canonical.com>
Merged-by: Christian Boltz <apparmor@cboltz.de>
(cherry picked from commit ff9e457189)
32cd90eb abstractions/ssh_certs: extend pki/trust directories
Whenever the evince deb package tries to open a snap browser which was
selected as the default, we get the following denial:
audit[2110]: AVC apparmor="DENIED" operation="exec" profile="/usr/bin/evince" name="/usr/bin/snap" pid=2110 comm="env" requested_mask="x" denied_mask="x" fsuid=1000 ouid=0
As a short-term solution, we are adding a snap-browsers profile
which restricts what snaps opened by evince can do.
The long-term solution is currently not available, but could be
accomplished by using enhanced environment variable filtering/mediation
and delegation of open fds.
Bug: https://launchpad.net/bugs/1794064
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
(cherry picked from commit fb3283f37e)
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/863
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
If apparmor_parser -N (in profiles_names_list()) fails,
aa-remove-unknown possibly gets an incomplete list of profiles in
/etc/apparmor.d/ and therefore might remove more profiles than it
should.
Replace the profiles_names_list() call with a direct apparmor_parser
call, and abort aa-remove-unknown if it exits with $? != 0
Before:
```
aa-remove-unknown -n
AppArmor parser error for /etc/apparmor.d/broken in profile /etc/apparmor.d/broken at line 1: syntax error, unexpected TOK_ID, expecting TOK_OPEN
Would remove 'delete_me'
```
After:
```
./aa-remove-unknown -n
AppArmor parser error for /etc/apparmor.d in profile /etc/apparmor.d/zbroken at line 1: syntax error, unexpected TOK_ID, expecting TOK_OPEN
apparmor_parser exited with failure, aborting.
```
And of course, after fixing the broken profile:
```
./aa-remove-unknown -n
Would remove 'delete_me'
```
(cherry picked from commit 5053a01d84)
This backports the fix in `aa-remove-unknown` from !836, but doesn't backport the cleanup in `rc.apparmor.functions`.
I propose this patch for 3.0 and all 2.x branches.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/859
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: John Johansen <john@jjmx.net>
If apparmor_parser -N (in profiles_names_list()) fails,
aa-remove-unknown possibly gets an incomplete list of profiles in
/etc/apparmor.d/ and therefore might remove more profiles than it
should.
Replace the profiles_names_list() call with a direct apparmor_parser
call, and abort aa-remove-unknown if it exits with $? != 0
Before:
```
aa-remove-unknown -n
AppArmor parser error for /etc/apparmor.d/broken in profile /etc/apparmor.d/broken at line 1: syntax error, unexpected TOK_ID, expecting TOK_OPEN
Would remove 'delete_me'
```
After:
```
./aa-remove-unknown -n
AppArmor parser error for /etc/apparmor.d in profile /etc/apparmor.d/zbroken at line 1: syntax error, unexpected TOK_ID, expecting TOK_OPEN
apparmor_parser exited with failure, aborting.
```
And of course, after fixing the broken profile:
```
./aa-remove-unknown -n
Would remove 'delete_me'
```
(cherry picked from commit 5053a01d84)
libapparmor: fix handling of failed symlink traversal, fixed a couple
of directory walk issues that could cause failures. The test included
in this commit was supposed to be included in the previous commit,
but was accidentally dropped. Even worse the make file changes did
make it causing the previous commit to break the CI.
Fixes: MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/85
Signed-off-by: John Johansen <john.johansen@canonical.com>
(cherry picked from commit bd78b6b292)
Today, a normal user connected and did something (dunno what) that caused smbd to try to `/usr/share/samba/mdssvc/elasticsearch_mappings.json`:
Samba logs:
```
root@smb:~# journalctl -b0 -u smbd
-- Logs begin at Fri 2022-01-21 14:17:01 UTC, end at Thu 2022-02-17 23:56:02 UTC. --
Feb 17 14:01:20 smb systemd[1]: Starting Samba SMB Daemon...
Feb 17 14:01:26 smb smbd[113]: [2022/02/17 14:01:26.904865, 0] ../../lib/util/become_daemon.c:135(daemon_ready)
Feb 17 14:01:26 smb systemd[1]: Started Samba SMB Daemon.
Feb 17 14:01:26 smb smbd[113]: daemon_ready: daemon 'smbd' finished starting up and ready to serve connections
Feb 17 21:05:35 smb smbd[3084]: pam_unix(samba:session): session opened for user jdoe by (uid=0)
Feb 17 21:05:37 smb smbd[3084]: [2022/02/17 21:05:37.735182, 0] ../../source3/rpc_server/mdssvc/mdssvc_es.c:92(mdssvc_es_init)
Feb 17 21:05:37 smb smbd[3084]: mdssvc_es_init: Opening mapping file [/usr/share/samba/mdssvc/elasticsearch_mappings.json] failed: unable to open /usr/share/samba/mdssvc/elasticsearch_mappings.json: Permission denied
Feb 17 21:05:37 smb smbd[3084]: [2022/02/17 21:05:37.735436, 0] ../../source3/rpc_server/mdssvc/mdssvc.c:1490(mdssvc_init)
Feb 17 21:05:37 smb smbd[3084]: mdssvc_init: backend init failed
Feb 17 21:05:37 smb smbd[3084]: [2022/02/17 21:05:37.735562, 0] ../../source3/rpc_server/mdssvc/srv_mdssvc_nt.c:152(_mdssvc_open)
Feb 17 21:05:37 smb smbd[3084]: _mdssvc_open: Couldn't create policy handle for partage
Feb 17 23:56:02 smb smbd[3084]: pam_unix(samba:session): session closed for user jdoe
```
Since the 'smb' machine is a container, the Apparmor denial ended up in the host's log:
```
$ journalctl -o cat --grep samba -k --since today | cat
audit: type=1400 audit(1645131937.730:98): apparmor="DENIED" operation="open" namespace="root//lxd-smb_<var-snap-lxd-common-lxd>" profile="smbd" name="/usr/share/samba/mdssvc/elasticsearch_mappings.json" pid=35359 comm="smbd" requested_mask="r" denied_mask="r" fsuid=166549 ouid=165536
```
It is the first time it occurs in years of use but it seems legitimate as:
1) this file is installed by the package
2) `git grep -F elasticsearch_mappings` in Debian samba's source shows many hits:
```
$ git grep -F elasticsearch_mappings
debian/samba.install:usr/share/samba/mdssvc/elasticsearch_mappings.json
docs-xml/manpages/mdsearch.1.xml: <filename>/usr/share/samba/mdssvc/elasticsearch_mappings.json</filename>
docs-xml/smbdotconf/misc/elasticsearchmappings.xml: <value type="default">&pathconfig.SAMBA_DATADIR;/elasticsearch_mappings.json</value>
docs/manpages/mdfind.1:/usr/share/samba/mdssvc/elasticsearch_mappings\&.json
docs/manpages/smb.conf.5:\fI\fIelasticsearch:mappings\fR\fR\fI = \fR\fI${prefix}/var/samba/elasticsearch_mappings\&.json\fR\fI \fR
selftest/selftest.pl: elasticsearch:mappings = $srcdir_abs/source3/rpc_server/mdssvc/elasticsearch_mappings.json
selftest/target/Samba3.pm: elasticsearch:mappings = $srcdir_abs/source3/rpc_server/mdssvc/elasticsearch_mappings.json
source3/rpc_server/mdssvc/es_parser_test.c: "%s/mdssvc/elasticsearch_mappings.json",
source3/rpc_server/mdssvc/mdssvc_es.c: "%s/mdssvc/elasticsearch_mappings.json",
source3/rpc_server/wscript_build: 'mdssvc/elasticsearch_mappings.json')
```
While only the `mdssvc` sub-dir could be authorized, the whole dir content seemed OK for read access anyway:
```
root@smb:~# ll /usr/share/samba/
total 53
drwxr-xr-x 5 root root 10 Feb 1 14:08 ./
drwxr-xr-x 67 root root 67 Jun 22 2021 ../
-rwxr-xr-x 1 root root 1163 Jan 31 13:11 addshare.py*
drwxr-xr-x 3 root root 4 Feb 1 14:08 admx/
drwxr-xr-x 2 root root 3 Feb 1 14:08 mdssvc/
-rwxr-xr-x 1 root root 2059 Jan 31 13:11 panic-action*
-rwxr-xr-x 1 root root 1333 Jan 31 13:11 setoption.py*
drwxr-xr-x 5 root root 57 Feb 1 14:08 setup/
-rw-r--r-- 1 root root 8942 Jan 31 13:11 smb.conf
-rwxr-xr-x 1 root root 2682 Jan 31 13:11 update-apparmor-samba-profile*
```
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/853
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
(cherry picked from commit 6e5fdb5c05)
Signed-off-by: John Johansen <john.johansen@canonical.com>
Update apache2-common so that other processes can trace the hats that include this file. The main `usr.sbin.apache2` profile includes `abstractions/base` which has these lines in it, which is why `ss -tnlp` sometimes fails and sometimes works.
See also: [Debian Bug #1003153](https://bugs.debian.org/1003153) for more details about how this occurs.
Fixes: https://bugs.debian.org/1003153
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/852
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
(cherry picked from commit 6fa2d528e9)
071935b9 Update apache2-common so that other processes can trace the hats that include...
In 73e124d4fb I've upstreamed the `is_container_with_internal_policy()` function, but so far it was not used anywhere upstream. This is the missing bit.
I could trace the history of that patch back to 2012 (2.7.102-0ubuntu3):
* debian/apparmor.init: do nothing in a container. This can be
removed once stacked profiles are supported and used by lxc.
(LP: #978297)
Context: I lack both knowledge and motivation to keep maintaining this as part of the Debian delta. I'd rather see upstream, and in particular folks more knowledgeable than me about LXC/LXD, or with external motivation factors to work on this part of the stack, take care of it.
Note: Debian has similar code in its [sysvinit script](https://salsa.debian.org/apparmor-team/apparmor/-/blob/debian/master/debian/apparmor.init). I'm not touching that one.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/840
Acked-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
(cherry picked from commit 5a41024bbe)
Signed-off-by: John Johansen <john.johansen@canonical.com>
This allows distributions to start aa-notify automatically, should they wish so, by installing that file in a suitable location, such as `/etc/xdg/autostart`.
This file was introduced in Ubuntu 2.8.95~2430-0ubuntu3 package in 2014, replacing the `/etc/X11/Xsession.d` snippet that Ubuntu had added in 2010.
I'd like to stop having to care about this file as part of the Debian delta and to enable greater collaboration.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/839
Acked-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
(cherry picked from commit 046442741f)
Signed-off-by: John Johansen <john.johansen@canonical.com>
GTK/QT apps need to read some config files in order to properly render their windows in a graphical session. There are some `qt5` abstractions already, but it looks like the `gtk` abstraction is missing.
The `*gtk*` rules are basically the location of the GTK config files I found on the internet when I was trying to compose this abstraction. Some of the paths are missing in Debian, but different distros can use (or were using) them. Since GTK apps use themes, the abstraction also include the whole `/usr/share/themes/` , `@{HOME}/.themes/` and `@{HOME}/.local/share/themes/` dirs. I'm not sure whether this should be tightened. The `.Xauthority` file is generally needed when you deal with GUI apps under Xserver. Also since all GUI apps redirect output/error to the `~/.xsession-errors` file, this file also was included here.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/65
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/168
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/825
Acked-by: John Johansen <john.johansen@canonical.com>
(cherry picked from commit c67681a5a9)
93d49a39 add the GTK abstraction
The Hack used to build the libapparmor swig interface for ruby fails
with ruby 3.1. Instead of trying to do black magic in ruby to rename
the generated Makefile to Makefile.new, just save off the Makefile
and restore after ruby's setup has been called.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/206
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Christian Boltz <apparmor@cboltz.de>
(cherry picked from commit 1ca30e35b0)
busybox xargs does not have -d nor long --max-procs options, instead use -0 (and separate arguments with printf "%s\\0") and -P which are more portable. While we are here, also add -r (--no-run-if-empty, which also has no long equivalent for busybox) as we likely don't want to run anything if no profile were found
This is useful for alpine systems where findutils is not installed by default, but busybox xargs is available.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/828
Acked-by: John Johansen <john.johansen@canoical.com>
(cherry picked from commit 0e52b555ae)
Signed-off-by: John Johansen <john.johansen@canonical.com>
profiles/apparmor.d: Fix file_mmap violation for bsc#1192336.
See merge request apparmor/apparmor!819
Acked-by: Christian Boltz <apparmor@cboltz.de> for 3.0 and master
(cherry picked from commit fc4d1f76fa)
e19abd3b profiles/apparmor.d: Fix file_mmap violation for bsc#1192336.
abstractions/python: merge /usr/ and /usr/local/ rules, and add some new rules
See merge request apparmor/apparmor!814
Acked-by: Georgia Garcia <georgia.garcia@canonical.com>
(cherry picked from commit 529c408d9e)
5491b758 abstractions/python: merge /usr/ and /usr/local/ rules
cac848e2 abstractions/python: add several permissions
Both aarch64 and s390x have a bigger wtmp record size (16 bytes more
than x86_64, 400 bytes total).
The byte position of the timestamp is also different on each
architecture. To make things even more interesting, s390x is big
endian.
Note that this MR includes more things, like
* moving `get_last_login_timestamp()` to the new `apparmor/notify.py` file
* add unit tests for it
* add wtmp example files from various architectures, including a
hand-edited one claiming to be from 1999
* fixing a bug in `get_last_login_timestamp()` that unpacked `type` from
too many bytes - which accidently worked on x86_64
* detecting from which architecture the wtmp file comes (luckily the
timestamps are located at different locations)
See the individual commits for details.
Fixes: https://bugzilla.opensuse.org/show_bug.cgi?id=1181155
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/809
(cherry picked from commit ca276d2bfd)
Acked-by: John Johansen <john.johansen@canonical.com>
Ensure that pre-2000 and post-2050 dates get rejected, and something in
between gets accepted.
This also extends coverage to 100% - before, the post-2050 branch was
not covered.
Both aarch64 and s390x have a bigger wtmp record size (16 bytes more
than x86_64, 400 bytes total).
The byte position of the timestamp is also different on each
architecture. To make things even more interesting, s390x is big endian.
Fixes: https://bugzilla.opensuse.org/show_bug.cgi?id=1181155
'type' is a short (see "ut_type" in wtmp(5)), therefore only read two
bytes and unpack them as short. Afterwards read two padding bytes to
/dev/null.
This accidently worked on x86_64 because it's little endian, but will
fail on big endian architectures.
A small patch set to fix two issues with binutils/aa-features-abi:
1. The `aa-features-abi -f` short argument was not added to the
`getopt_long()` set of short arguments, resulting in the command
incorrectly failing when passed -f
2. Due to variable shadowing the file descriptor for the `--file`
argument was not being autoclosed.
- binutils/aa-features-abi: make -f short arg actually be accepted
- binutils/aa-features-abi: fix failure to close fd due to shadowed
var decl
Signed-off-by: Steve Beattie <steve.beattie@canonical.com>
Acked-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/804
(cherry picked from commit a24cda5ae1)
8137beb2 binutils/aa-features-abi: make -f short arg actually be accepted
ffc6529b binutils/aa-features-abi: fix failure to close fd due to shadowed var decl
parser: Fix unknown state condition RLIMIT_MODEINCLDE
See merge request apparmor/apparmor!803
Acked-by: Christian Boltz for all branches
(cherry picked from commit b0bc0d5323)
dc7755e5 parser: Fix unknown state condition RLIMIT_MODEINCLDE
The default log format for void linux is not handled by current log
parsing. The following example message results in an invalid record
error.
2021-09-11T20:57:41.91645 kern.notice: [ 469.180605] audit: type=1400 audit(1631392703.952:3): apparmor="ALLOWED" operation="mkdir" profile="/usr/bin/kak" name="/run/user/1000/kakoune/" pid=2545 comm="kak" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
This log message fails on parsing
kern.notice:
which differs from the expect syslog format of
host_name kernel:
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/196
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/799
Signed-off-by: John Johansen <john.johansen@canonical.com>
(cherry picked from commit b32b898a9a)
Signed-off-by: John Johansen <john.johansen@canonical.com>
Some STATUS log events trigger a crash in aa-notify because the log
line doesn't have operation=. Examples are:
type=AVC msg=audit(1630913351.586:4): apparmor="STATUS" info="AppArmor Filesystem Enabled" pid=1 comm="swapper/0"
type=AVC msg=audit(1630913352.610:6): apparmor="STATUS" info="AppArmor sha1 policy hashing enabled" pid=1 comm="swapper/0"
Fix this by not looking at log events without operation=
Also add one of the example events as libapparmor testcase.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/194
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/797
Acked-by: John Johansen <john.johansen@canonical.com>
(cherry picked from commit c37586cd11)
Signed-off-by: John Johansen <john.johansen@canonical.com>
add a missing slash at the end of the sys rule
See merge request apparmor/apparmor!791
Acked-by: Christian Boltz <apparmor@cboltz.de> for 2.12..master
(cherry picked from commit 4fd7bcc289)
b3dcd02d add a missing slash at the end of the sys rule
Merge branch 'fix-policy-cache-regression-tests' into 'master'
When using the system parser ${parser_config} will be empty and so if this
is unconditionally passed as an argument to the parser then this gets in
interpreted as the name of a file to be compiled and hence the parser just
prints:
File not found, skipping...
File not found, skipping...
File not found, skipping...
...
for all the aa_policy_cache tests - instead fix this to pass a single args
argument to the parser which will only include parser_config if it is not
empty.
This fixes the regression tests to run to completion without error when
USE_SYSTEM=1 is set.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/782
Signed-off-by: Alex Murray <alex.murray@canonical.com>
Acked-by: Steve Beattie <steve@nxnw.org>
(cherry picked from commit 8d0b48df12)
Signed-off-by: Steve Beattie <steve.beattie@canonical.com>
2021-08-11 22:33:55 -07:00
150 changed files with 1225 additions and 232 deletions
test -f ./.libs/$(EXPECTED_SO_NAME)||{echo'*** unexpected .so name/number for libapparmor (expected $(EXPECTED_SO_NAME), the actual filename is shown below) ***'; ls -l ./.libs/libapparmor.so.*.* ;exit 1;}
# Site-specific additions and overrides. See local/README for details.
include if exists <local/samba-rpcd-spoolss>
}
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
