Merge from trunk revision 1805:

Attached is a patch to make the initscript not fail if /tmp is full
  by converting the comm(1) usage on temporary files to an embedded
  awk script. On both Ubuntu and OpenSUSE, a version of awk (mawk in
  Ubuntu, gawk in OpenSUSE) is either a direct or indirect dependency
  on the minimal or base package set, and the original reporter also
  mentioned that an awk-based solution would be palatable in a way
  that converting to bash, or using perl or python here would not be.

  In the embedded awk script, I've tried to avoid gawk or mawk
  specific behaviors or extensions; e.g. this is the reason for the
  call to sort on the output of the awk script, rather than using
  gawk's asort(). But please let me know if you see anything that
  shouldn't be portable across awk implementations.

  An additional issue that is fixed in both scripts is handling
  child profiles (e.g. hats) during reload. If child profiles are
  filtered out (via grep -v '//') of the list to consider, then
  on reloading a profile where a child profile has been removed or
  renamed, that child profile will continue to stick around. However,
  if the profile containing child profiles is removed entirely,
  if the initscript attempts to unload the child profiles after the
  parent is removed, this will fail because they were unloaded when
  the parent was unloaded.  Thus I removed any filtering of child
  profiles out, but do a post-awk reverse sort which guarantees that
  any child profiles will be removed before their parent is. I also
  added the LC_COLLATE=C (based on the Ubuntu version) to the sort
  call to ensure a consistent sort order.

  To restate, the problem with the existing code is that it creates
  temporary files in $TMPDIR (by default /tmp) and if that partition
  is full, problems with the reload action ensue. Alternate solutions
  include switching the initscript to use bash and its <$() extension
  or setting TMPDIR to /dev/shm/. The former is unpalatable to some
  (particularly for an initscript), and for the latter, /dev/shm is
  only guaranteed to exist on GNU libc based systems (glibc apparently
  expects /dev/shm to exist for its POSIX shared memory implementation;
  see shm_overview(7)).  So to me, awk (sans GNU extensions) looks
  to be the least bad option here.

Nominated-By: Steve Beattie <sbeattie@ubuntu.com>
Acked-By: John Johansen <john.johansen@canonical.com>

Bug: https://launchpad.net/bugs/775785

.bzrignore

@@ -1,83 +1,28 @@
-apparmor-*
-cscope.*
-binutils/aa-enabled
-binutils/aa-enabled.1
-binutils/aa-exec
-binutils/aa-exec.1
-binutils/aa-features-abi
-binutils/aa-features-abi.1
-binutils/aa-load
-binutils/aa-status
-binutils/aa-status.8
-binutils/cJSON.o
-binutils/po/*.mo
 parser/po/*.mo
 parser/af_names.h
 parser/cap_names.h
-parser/generated_cap_names.h
-parser/generated_af_names.h
-parser/tst_lib
 parser/tst_misc
 parser/tst_regex
 parser/tst_symtab
 parser/tst_variable
-parser/tst/simple_tests/generated_*/*
 parser/parser_lex.c
 parser/parser_version.h
 parser/parser_yacc.c
 parser/parser_yacc.h
 parser/pod2htm*.tmp
-parser/af_rule.o
-parser/af_unix.o
-parser/all_rule.o
-parser/common_optarg.o
-parser/dbus.o
-parser/default_features.o
-parser/lib.o
-parser/libapparmor_re/aare_rules.o
-parser/libapparmor_re/chfa.o
-parser/libapparmor_re/expr-tree.o
-parser/libapparmor_re/hfa.o
-parser/libapparmor_re/libapparmor_re.a
-parser/libapparmor_re/parse.o
-parser/mount.o
-parser/mqueue.o
-parser/network.o
-parser/parser_alias.o
-parser/parser_common.o
-parser/parser_include.o
-parser/parser_interface.o
-parser/parser_lex.o
-parser/parser_main.o
-parser/parser_merge.o
-parser/parser_misc.o
-parser/parser_policy.o
-parser/parser_regex.o
-parser/parser_symtab.o
-parser/parser_variable.o
-parser/parser_yacc.o
-parser/policy_cache.o
-parser/profile.o
-parser/ptrace.o
-parser/rule.o
-parser/signal.o
-parser/userns.o
-parser/io_uring.o
 parser/*.7
 parser/*.5
 parser/*.8
 parser/*.7.html
 parser/*.5.html
 parser/*.8.html
+parser/common
 parser/apparmor_parser
-parser/libapparmor_re/parse.cc
 parser/libapparmor_re/regexp.cc
 parser/techdoc.aux
 parser/techdoc.log
 parser/techdoc.pdf
 parser/techdoc.toc
-profiles/apparmor.d/local/*
-!profiles/apparmor.d/local/README
 libraries/libapparmor/Makefile
 libraries/libapparmor/Makefile.in
 libraries/libapparmor/aclocal.m4
@@ -94,61 +39,27 @@ libraries/libapparmor/install-sh
 libraries/libapparmor/libtool
 libraries/libapparmor/ltmain.sh
 libraries/libapparmor/missing
-libraries/libapparmor/test-driver
 libraries/libapparmor/ylwrap
 libraries/libapparmor/doc/Makefile
 libraries/libapparmor/doc/Makefile.in
 libraries/libapparmor/doc/*.2
-libraries/libapparmor/doc/aa_*.3
-libraries/libapparmor/include/Makefile
-libraries/libapparmor/include/Makefile.in
-libraries/libapparmor/include/sys/Makefile
-libraries/libapparmor/include/sys/Makefile.in
 libraries/libapparmor/src/.deps
 libraries/libapparmor/src/.libs
 libraries/libapparmor/src/Makefile
 libraries/libapparmor/src/Makefile.in
-libraries/libapparmor/src/PMurHash.lo
-libraries/libapparmor/src/PMurHash.o
 libraries/libapparmor/src/af_protos.h
 libraries/libapparmor/src/change_hat.lo
-libraries/libapparmor/src/features.lo
-libraries/libapparmor/src/features.o
 libraries/libapparmor/src/grammar.lo
-libraries/libapparmor/src/grammar.o
-libraries/libapparmor/src/kernel.lo
-libraries/libapparmor/src/kernel.o
-libraries/libapparmor/src/kernel_interface.lo
-libraries/libapparmor/src/kernel_interface.o
 libraries/libapparmor/src/libaalogparse.lo
-libraries/libapparmor/src/libaalogparse.o
 libraries/libapparmor/src/libimmunix_warning.lo
-libraries/libapparmor/src/policy_cache.lo
-libraries/libapparmor/src/policy_cache.o
-libraries/libapparmor/src/private.lo
-libraries/libapparmor/src/private.o
 libraries/libapparmor/src/scanner.lo
-libraries/libapparmor/src/scanner.o
-libraries/libapparmor/src/libapparmor.pc
 libraries/libapparmor/src/libapparmor.la
 libraries/libapparmor/src/libimmunix.la
 libraries/libapparmor/src/grammar.c
 libraries/libapparmor/src/grammar.h
 libraries/libapparmor/src/scanner.c
 libraries/libapparmor/src/scanner.h
-libraries/libapparmor/src/test-suite.log
 libraries/libapparmor/src/tst_aalogmisc
-libraries/libapparmor/src/tst_aalogmisc.log
-libraries/libapparmor/src/tst_aalogmisc.o
-libraries/libapparmor/src/tst_aalogmisc.trs
-libraries/libapparmor/src/tst_features
-libraries/libapparmor/src/tst_features.log
-libraries/libapparmor/src/tst_features.o
-libraries/libapparmor/src/tst_features.trs
-libraries/libapparmor/src/tst_kernel
-libraries/libapparmor/src/tst_kernel.log
-libraries/libapparmor/src/tst_kernel.o
-libraries/libapparmor/src/tst_kernel.trs
 libraries/libapparmor/swig/Makefile
 libraries/libapparmor/swig/Makefile.in
 libraries/libapparmor/swig/perl/LibAppArmor.bs
@@ -157,34 +68,14 @@ libraries/libapparmor/swig/perl/Makefile
 libraries/libapparmor/swig/perl/Makefile.PL
 libraries/libapparmor/swig/perl/Makefile.in
 libraries/libapparmor/swig/perl/Makefile.perl
-libraries/libapparmor/swig/perl/Makefile.perle
-libraries/libapparmor/swig/perl/MYMETA.json
-libraries/libapparmor/swig/perl/MYMETA.yml
 libraries/libapparmor/swig/perl/blib
 libraries/libapparmor/swig/perl/libapparmor_wrap.c
-libraries/libapparmor/swig/perl/libapparmor_wrap.o
 libraries/libapparmor/swig/perl/pm_to_blib
-libraries/libapparmor/swig/python/LibAppArmor.py
-libraries/libapparmor/swig/python/LibAppArmor.egg-info/
-libraries/libapparmor/swig/python/build/
-libraries/libapparmor/swig/python/libapparmor_wrap.c
 libraries/libapparmor/swig/python/Makefile
 libraries/libapparmor/swig/python/Makefile.in
 libraries/libapparmor/swig/python/setup.py
-libraries/libapparmor/swig/python/test/Makefile
-libraries/libapparmor/swig/python/test/Makefile.in
-libraries/libapparmor/swig/python/test/test-suite.log
-libraries/libapparmor/swig/python/test/test_python.py
-libraries/libapparmor/swig/python/test/test_python.py.log
-libraries/libapparmor/swig/python/test/test_python.py.trs
-libraries/libapparmor/swig/ruby/LibAppArmor.so
-libraries/libapparmor/swig/ruby/LibAppArmor_wrap.c
-libraries/libapparmor/swig/ruby/LibAppArmor_wrap.o
 libraries/libapparmor/swig/ruby/Makefile
 libraries/libapparmor/swig/ruby/Makefile.in
-libraries/libapparmor/swig/ruby/Makefile.bak
-libraries/libapparmor/swig/ruby/Makefile.ruby
-libraries/libapparmor/swig/ruby/mkmf.log
 libraries/libapparmor/testsuite/.deps
 libraries/libapparmor/testsuite/.libs
 libraries/libapparmor/testsuite/Makefile
@@ -200,32 +91,18 @@ libraries/libapparmor/testsuite/lib/Makefile.in
 libraries/libapparmor/testsuite/libaalogparse.test/Makefile
 libraries/libapparmor/testsuite/libaalogparse.test/Makefile.in
 libraries/libapparmor/testsuite/test_multi/out
-libraries/libapparmor/testsuite/test_multi_multi-test_multi.o
 changehat/mod_apparmor/.libs
+changehat/mod_apparmor/common
+changehat/pam_apparmor/common
+changehat/tomcat_apparmor/common
+utils/common
 utils/*.8
 utils/*.8.html
 utils/*.5
 utils/*.5.html
 utils/*.tmp
 utils/po/*.mo
-utils/apparmor/*.pyc
-utils/apparmor/rule/*.pyc
-utils/apparmor.egg-info/
-utils/build/
-utils/htmlcov/
-utils/test/common_test.pyc
-utils/test/.coverage
-utils/test/coverage-report.txt
-utils/test/htmlcov/
-utils/vim/apparmor.vim
-utils/vim/apparmor.vim.5
-utils/vim/apparmor.vim.5.html
-utils/vim/pod2htmd.tmp
-tests/regression/apparmor/*.o
-tests/regression/apparmor/aa_policy_cache
 tests/regression/apparmor/access
-tests/regression/apparmor/at_secure
-tests/regression/apparmor/attach_disconnected
 tests/regression/apparmor/changehat
 tests/regression/apparmor/changehat_fail
 tests/regression/apparmor/changehat_fork
@@ -240,10 +117,6 @@ tests/regression/apparmor/chgrp
 tests/regression/apparmor/chmod
 tests/regression/apparmor/chown
 tests/regression/apparmor/clone
-tests/regression/apparmor/dbus_eavesdrop
-tests/regression/apparmor/dbus_message
-tests/regression/apparmor/dbus_service
-tests/regression/apparmor/dbus_unrequested_reply
 tests/regression/apparmor/deleted
 tests/regression/apparmor/env_check
 tests/regression/apparmor/environ
@@ -254,40 +127,26 @@ tests/regression/apparmor/fchdir
 tests/regression/apparmor/fchgrp
 tests/regression/apparmor/fchmod
 tests/regression/apparmor/fchown
-tests/regression/apparmor/fd_inheritance
-tests/regression/apparmor/fd_inheritor
 tests/regression/apparmor/fork
-tests/regression/apparmor/introspect
-tests/regression/apparmor/io_uring
 tests/regression/apparmor/link
 tests/regression/apparmor/link_subset
 tests/regression/apparmor/mkdir
 tests/regression/apparmor/mmap
 tests/regression/apparmor/mount
-tests/regression/apparmor/move_mount
 tests/regression/apparmor/named_pipe
-tests/regression/apparmor/net_finegrained_rcv
-tests/regression/apparmor/net_finegrained_snd
 tests/regression/apparmor/net_raw
 tests/regression/apparmor/open
 tests/regression/apparmor/openat
 tests/regression/apparmor/pipe
-tests/regression/apparmor/pivot_root
-tests/regression/apparmor/posix_mq_rcv
-tests/regression/apparmor/posix_mq_snd
 tests/regression/apparmor/ptrace
 tests/regression/apparmor/ptrace_helper
 tests/regression/apparmor/pwrite
-tests/regression/apparmor/query_label
 tests/regression/apparmor/readdir
 tests/regression/apparmor/rename
 tests/regression/apparmor/rw
-tests/regression/apparmor/socketpair
 tests/regression/apparmor/swap
 tests/regression/apparmor/symlink
 tests/regression/apparmor/syscall_chroot
-tests/regression/apparmor/syscall_ioperm
-tests/regression/apparmor/syscall_iopl
 tests/regression/apparmor/syscall_mknod
 tests/regression/apparmor/syscall_mlockall
 tests/regression/apparmor/syscall_ptrace
@@ -298,20 +157,9 @@ tests/regression/apparmor/syscall_setpriority
 tests/regression/apparmor/syscall_setscheduler
 tests/regression/apparmor/syscall_sysctl
 tests/regression/apparmor/sysctl_proc
-tests/regression/apparmor/sysv_mq_rcv
-tests/regression/apparmor/sysv_mq_snd
 tests/regression/apparmor/tcp
-tests/regression/apparmor/transition
 tests/regression/apparmor/unix_fd_client
 tests/regression/apparmor/unix_fd_server
-tests/regression/apparmor/unix_socket
-tests/regression/apparmor/unix_socket_client
 tests/regression/apparmor/unlink
-tests/regression/apparmor/userns
-tests/regression/apparmor/userns_setns
-tests/regression/apparmor/uservars.inc
 tests/regression/apparmor/xattrs
-tests/regression/apparmor/xattrs_profile
 tests/regression/apparmor/coredump
-**/__pycache__/
-*.orig

.gitlab-ci.yml

@@ -1,166 +0,0 @@
----
-image: ubuntu:latest
-
-# XXX - add a deploy stage to publish man pages, docs, and coverage
-# reports
-
-stages:
-  - build
-  - test
-
-.ubuntu-before_script:
-  before_script:
-    - export DEBIAN_FRONTEND=noninteractive
-    - apt-get update -qq
-    - apt-get install --no-install-recommends -y gcc perl liblocale-gettext-perl linux-libc-dev lsb-release make
-    - lsb_release -a
-    - uname -a
-
-.install-c-build-deps: &install-c-build-deps
-  - apt-get install --no-install-recommends -y build-essential apache2-dev autoconf autoconf-archive automake bison dejagnu flex libpam-dev libtool pkg-config python3-all-dev python3-setuptools ruby-dev swig zlib1g-dev
-
-build-all:
-  stage: build
-  extends:
-    - .ubuntu-before_script
-  artifacts:
-    name: ${CI_COMMIT_REF_NAME}-${CI_COMMIT_SHA}
-    expire_in: 30 days
-    untracked: true
-    paths:
-      - libraries/libapparmor/
-      - parser/
-      - binutils/
-      - utils/
-      - changehat/mod_apparmor/
-      - changehat/pam_apparmor/
-      - profiles/
-  script:
-    - *install-c-build-deps
-    - cd libraries/libapparmor && ./autogen.sh && ./configure --with-perl --with-python --prefix=/usr && make && cd ../.. || { cat config.log ; exit 1 ; }
-    - make -C parser
-    - make -C binutils
-    - make -C utils
-    - make -C changehat/mod_apparmor
-    - make -C changehat/pam_apparmor
-    - make -C profiles
-
-test-libapparmor:
-  stage: test
-  needs: ["build-all"]
-  extends:
-    - .ubuntu-before_script
-  script:
-    - *install-c-build-deps
-    - make -C libraries/libapparmor check
-
-test-parser:
-  stage: test
-  needs: ["build-all"]
-  extends:
-    - .ubuntu-before_script
-  script:
-    - *install-c-build-deps
-    - make -C parser check
-
-test-binutils:
-  stage: test
-  needs: ["build-all"]
-  extends:
-    - .ubuntu-before_script
-  script:
-    - make -C binutils check
-
-test-utils:
-  stage: test
-  needs: ["build-all"]
-  extends:
-    - .ubuntu-before_script
-  script:
-    - apt-get install --no-install-recommends -y libc6-dev libjs-jquery libjs-jquery-throttle-debounce libjs-jquery-isonscreen libjs-jquery-tablesorter pyflakes3 python3-coverage python3-notify2 python3-psutil python3-setuptools
-    # See apparmor/apparmor#221
-    - make -C parser/tst gen_dbus
-    - make -C parser/tst gen_xtrans
-    - make -C utils check
-    - make -C utils/test coverage-regression
-  artifacts:
-    paths:
-      - utils/test/htmlcov/
-    when: always
-
-test-mod-apparmor:
-  stage: test
-  needs: ["build-all"]
-  extends:
-    - .ubuntu-before_script
-  script:
-    - make -C changehat/mod_apparmor check
-
-test-profiles:
-  stage: test
-  needs: ["build-all"]
-  extends:
-    - .ubuntu-before_script
-  script:
-    - make -C profiles check-parser
-    - make -C profiles check-abstractions.d
-    - make -C profiles check-extras
-
-shellcheck:
-  stage: test
-  needs: []
-  extends:
-    - .ubuntu-before_script
-  script:
-  - apt-get install --no-install-recommends -y file shellcheck xmlstarlet
-  - shellcheck --version
-  - './tests/bin/shellcheck-tree --format=checkstyle
-       | xmlstarlet tr tests/checkstyle2junit.xslt
-       > shellcheck.xml'
-  artifacts:
-    when: always
-    reports:
-      junit: shellcheck.xml
-
-# Disabled due to aa-logprof dependency on /sbin/apparmor_parser existing
-#   - make -C profiles check-profiles
-
-# test-pam_apparmor:
-#  - stage: test
-#  - script:
-#    - cd changehat/pam_apparmor && make check
-
-include:
-  - template: SAST.gitlab-ci.yml
-  - template: Secret-Detection.gitlab-ci.yml
-
-variables:
-  SAST_EXCLUDED_ANALYZERS: "eslint,flawfinder,semgrep,spotbugs"
-  SAST_BANDIT_EXCLUDED_PATHS: "*/tst/*, */test/*"
-
-.send-to-coverity: &send-to-coverity
-  - curl https://scan.coverity.com/builds?project=$COVERITY_SCAN_PROJECT_NAME
-    --form token=$COVERITY_SCAN_TOKEN --form email=$GITLAB_USER_EMAIL
-    --form file=@$(ls apparmor-*-cov-int.tar.gz) --form version="$(git describe --tags)"
-    --form description="$(git describe --tags) / $CI_COMMIT_TITLE / $CI_COMMIT_REF_NAME:$CI_PIPELINE_ID"
-
-coverity:
-  stage: .post
-  extends:
-    - .ubuntu-before_script
-  only:
-    refs:
-      - master
-  script:
-      - apt-get install --no-install-recommends -y curl git texlive-latex-recommended
-      - *install-c-build-deps
-      - curl -o /tmp/cov-analysis-linux64.tgz https://scan.coverity.com/download/linux64
-        --form project=$COVERITY_SCAN_PROJECT_NAME --form token=$COVERITY_SCAN_TOKEN
-      - tar xfz /tmp/cov-analysis-linux64.tgz
-      - COV_VERSION=$(ls -dt cov-analysis-linux64-* | head -1)
-      - PATH=$PATH:$(pwd)/$COV_VERSION/bin
-      - make coverity
-      - *send-to-coverity
-  artifacts:
-    paths:
-      - "apparmor-*.tar.gz"

.shellcheckrc

@@ -1,10 +0,0 @@
-# Don't follow source'd scripts
-disable=SC1090
-disable=SC1091
-
-# dash supports 'local'
-disable=SC2039
-disable=SC3043
-
-# dash supports 'echo -n'
-disable=SC3037

Makefile

@@ -1,90 +1,65 @@
 #
 #
-.PHONY: all
-all:
-	@echo "*** See README for information how to build AppArmor ***"
-	exit 1
+OVERRIDE_TARBALL=yes
 
-COMMONDIR=common
-include ${COMMONDIR}/Make.rules
+include common/Make.rules
 
-DIRS=libraries/libapparmor \
-     binutils \
-     parser \
+DIRS=parser \
+     profiles \
      utils \
+     changehat/libapparmor \
      changehat/mod_apparmor \
      changehat/pam_apparmor \
-     profiles \
+     management/apparmor-dbus \
+     management/applets/apparmorapplet-gnome \
+     management/yastui \
+     common \
      tests
 
-# with conversion to git, we don't export from the remote
-REPO_URL?=git@gitlab.com:apparmor/apparmor.git
-REPO_BRANCH?=master
+REPO_URL?=lp:apparmor/2.6
+# alternate possibilities to export from
+#REPO_URL=.
+#REPO_URL="bzr+ssh://bazaar.launchpad.net/~sbeattie/+junk/apparmor-dev/"
 
-COVERITY_DIR=cov-int
 RELEASE_DIR=apparmor-${VERSION}
 __SETUP_DIR?=.
 
 # We create a separate version for tags because git can't handle tags
 # with embedded ~s in them. No spaces around '-' or they'll get
 # embedded in ${VERSION}
-# apparmor version tag format 'vX.Y.ZZ'
-# apparmor branch name format 'apparmor-X.Y'
-TAG_VERSION="v$(subst ~,-,${VERSION})"
-
-# Add exclusion entries arguments for tar here, of the form:
-#   --exclude dir_to_exclude --exclude other_dir
-TAR_EXCLUSIONS=
+TAG_VERSION=$(subst ~,-, ${VERSION})
 
 .PHONY: tarball
 tarball: clean
-	REPO_VERSION=`$(value REPO_VERSION_CMD)` && \
-	$(MAKE) export_dir __EXPORT_DIR=${RELEASE_DIR} __REPO_VERSION=$${REPO_VERSION} && \
-	$(MAKE) setup __SETUP_DIR=${RELEASE_DIR} && \
-	tar ${TAR_EXCLUSIONS} -cvzf ${RELEASE_DIR}.tar.gz ${RELEASE_DIR}
+	REPO_VERSION=`$(value REPO_VERSION_CMD)` ; \
+	make export_dir __EXPORT_DIR=${RELEASE_DIR} __REPO_VERSION=$${REPO_VERSION} ; \
+	make setup __SETUP_DIR=${RELEASE_DIR} ; \
+	tar cvzf ${RELEASE_DIR}.tar.gz ${RELEASE_DIR}
 
 .PHONY: snapshot
 snapshot: clean
-	$(eval REPO_VERSION:=$(shell $(value REPO_VERSION_CMD)))
-	$(eval SNAPSHOT_NAME=apparmor-$(VERSION)~$(shell echo $(REPO_VERSION) | cut -d '-' -f 2-))
-	$(MAKE) export_dir __EXPORT_DIR=${SNAPSHOT_NAME} __REPO_VERSION=${REPO_VERSION} && \
-	$(MAKE) setup __SETUP_DIR=${SNAPSHOT_NAME} && \
-	tar ${TAR_EXCLUSIONS} -cvzf ${SNAPSHOT_NAME}.tar.gz ${SNAPSHOT_NAME}
+	REPO_VERSION=`$(value REPO_VERSION_CMD)` ; \
+	SNAPSHOT_DIR=apparmor-${VERSION}~$${REPO_VERSION} ;\
+	make export_dir __EXPORT_DIR=$${SNAPSHOT_DIR} __REPO_VERSION=$${REPO_VERSION} ; \
+	make setup __SETUP_DIR=$${SNAPSHOT_DIR} ; \
+	tar cvzf $${SNAPSHOT_DIR}.tar.gz $${SNAPSHOT_DIR} ;
 
-.PHONY: coverity
-coverity: snapshot
-	cd $(SNAPSHOT_NAME)/libraries/libapparmor && ./configure --with-python
-	$(foreach dir, libraries/libapparmor utils, \
-		cov-build --dir $(COVERITY_DIR) --no-command --fs-capture-search $(SNAPSHOT_NAME)/$(dir); \
-		mv $(COVERITY_DIR)/build-log.txt $(COVERITY_DIR)/build-log-python-$(subst /,.,$(dir)).txt ;)
-	cov-build --dir $(COVERITY_DIR) -- sh -c \
-	"$(foreach dir, $(filter-out utils profiles tests, $(DIRS)), \
-		$(MAKE) -C $(SNAPSHOT_NAME)/$(dir);) "
-	tar -cvzf $(SNAPSHOT_NAME)-$(COVERITY_DIR).tar.gz $(COVERITY_DIR)
 
 .PHONY: export_dir
 export_dir:
 	mkdir $(__EXPORT_DIR)
-	/usr/bin/git archive --prefix=$(__EXPORT_DIR)/ --format tar $(__REPO_VERSION) | tar xv
-	echo "$(REPO_URL) $(REPO_BRANCH) $(__REPO_VERSION)" > $(__EXPORT_DIR)/common/.stamp_rev
+	/usr/bin/bzr export --per-file-timestamps -r $(__REPO_VERSION) $(__EXPORT_DIR) $(REPO_URL)
+	echo "$(REPO_URL) $(__REPO_VERSION)" > $(__EXPORT_DIR)/common/.stamp_rev
 
 .PHONY: clean
 clean:
-	-rm -rf ${RELEASE_DIR} ./apparmor-${VERSION}~* ${COVERITY_DIR}
-	for dir in $(DIRS); do \
-		$(MAKE) -C $$dir clean; \
-	done
+	-rm -rf ${RELEASE_DIR} ./apparmor-${VERSION}~*
 
 .PHONY: setup
 setup:
 	cd $(__SETUP_DIR)/libraries/libapparmor && ./autogen.sh
-	# parser has an extra doc to build
-	$(MAKE) -C $(__SETUP_DIR)/parser extra_docs
-	# libraries/libapparmor needs configure to have run before
-	# building docs
-	$(foreach dir, $(filter-out libraries/libapparmor tests, $(DIRS)), \
-		$(MAKE) -C $(__SETUP_DIR)/$(dir) docs;)
 
 .PHONY: tag
 tag:
-	git tag -m 'AppArmor $(VERSION)' -s $(TAG_VERSION)
+	bzr tag apparmor_${TAG_VERSION}
+

README

@@ -0,0 +1,181 @@
+------------
+Introduction
+------------
+AppArmor protects systems from insecure or untrusted processes by
+running them in restricted confinement, while still allowing processes
+to share files, exercise privilege and communicate with other processes.
+AppArmor is a Mandatory Access Control (MAC) mechanism which uses the
+Linux Security Module (LSM) framework. The confinement's restrictions
+are mandatory and are not bound to identity, group membership, or object
+ownership. The protections provided are in addition to the kernel's
+regular access control mechanisms (including DAC) and can be used to
+restrict the superuser.
+
+The AppArmor kernel module and accompanying user-space tools are
+available under the GPL license (the exception is the libapparmor
+library, available under the LGPL license, which allows change_hat(2)
+and change_profile(2) to be used by non-GPL binaries).
+
+For more information, you can read the techdoc.pdf (available after
+building the parser) and by visiting the http://apparmor.net/ web
+site.
+
+
+-------------
+Source Layout
+-------------
+
+AppArmor consists of several different parts:
+
+changehat/	source for using changehat with Apache, PAM and Tomcat
+common/		common makefile rules
+desktop/	empty
+kernel-patches/	compatibility patches for various kernel versions
+libraries/	libapparmor source and language bindings
+parser/		source for parser/loader and corresponding documentation
+profiles/	configuration files, reference profiles and abstractions
+tests/		regression and stress testsuites
+utils/		high-level utilities for working with AppArmor
+
+--------------------------------------
+Important note on AppArmor kernel code
+--------------------------------------
+
+While most of the kernel AppArmor code has been accepted in the
+upstream Linux kernel, a few important pieces were not included. These
+missing pieces unfortunately are important bits for AppArmor userspace
+and kernel interaction; therefore we have included compatibility
+patches in the kernel-patches/ subdirectory, versioned by upstream
+kernel (2.6.37 patches should apply cleanly to 2.6.38 source).
+
+Without these patches applied to the kernel, the AppArmor userspace
+will not function correctly.
+
+------------------------------------------
+Building and Installing AppArmor Userspace
+------------------------------------------
+
+To build and install AppArmor userspace on your system, build and install in
+the following order.
+
+
+libapparmor:
+$ cd ./libraries/libapparmor
+$ sh ./autogen.sh
+$ sh ./configure --prefix=/usr --with-perl	# see below
+$ make
+$ make check
+
+[optional arguments to libapparmor's configure include --with-python
+ and --with-ruby, to generate python and ruby bindings to libapparmor,
+ respectively.]
+
+
+Utilities:
+$ cd utils
+$ make
+$ make install
+
+
+parser:
+$ cd parser
+$ make
+$ make tests	# not strictly necessary as they are run during the
+		# build by default
+$ make install
+
+
+Apache mod_apparmor:
+$ cd changehat/mod_apparmor
+$ make		# depends on libapparmor having been built first
+$ make install
+
+
+PAM AppArmor:
+$ cd changehat/pam_apparmor
+$ make		# depends on libapparmor having been built first
+$ make install
+
+
+Profiles:
+$ cd profiles
+$ make
+$ make check	# depends on the parser having been built first
+$ make install
+
+
+-------------------
+AppArmor Testsuites
+-------------------
+
+A number of testsuites are in the AppArmor sources. Most have documentation on
+usage and how to update and add tests. Below is a quick overview of their
+location and how to run them.
+
+
+Regression tests
+----------------
+For details on structure and adding tests, see
+tests/regression/apparmor/README.
+
+To run:
+$ cd tests/regression/apparmor (requires root)
+$ make
+$ sudo make tests
+$ sudo bash open.sh -r	 # runs and saves the last testcase from open.sh
+
+
+Parser tests
+------------
+For details on structure and adding tests, see parser/tst/README.
+
+To run:
+$ cd parser/tst
+$ make
+$ make tests
+
+
+Libapparmor
+-----------
+For details on structure and adding tests, see libraries/libapparmor/README.
+$ cd libraries/libapparmor
+$ make check
+
+Profile checks
+--------------
+A basic consistency check to ensure that the parser and aa-logprof parse
+successfully the current set of shipped profiles. The system or other
+parser and logprof can be passed in by overriding the PARSER and LOGPROF
+variables.
+$ cd profiles
+$ make && make check
+
+Stress Tests
+------------
+To run AppArmor stress tests:
+$ make all
+
+Use these:
+$ ./change_hat
+$ ./child
+$ ./kill.sh
+$ ./open
+$ ./s.sh
+
+Or run all at once:
+$ ./stress.sh
+
+Please note that the above will stress the system so much it may end up
+invoking the OOM killer.
+
+To run parser stress tests (requires /usr/bin/ruby):
+$ ./stress.sh
+
+(see stress.sh -h for options)
+
+-----------------------------------------------
+Building and Installing AppArmor Kernel Patches
+-----------------------------------------------
+
+TODO
+

README.md

@@ -1,362 +0,0 @@
-# AppArmor
-
-[![Build status](https://gitlab.com/apparmor/apparmor/badges/master/build.svg)](https://gitlab.com/apparmor/apparmor/commits/master)
-[![Overall test coverage](https://gitlab.com/apparmor/apparmor/badges/master/coverage.svg)](https://gitlab.com/apparmor/apparmor/pipelines)
-[![Core Infrastructure Initiative Best Practices](https://bestpractices.coreinfrastructure.org/projects/1699/badge)](https://bestpractices.coreinfrastructure.org/projects/1699)
-
-------------
-Introduction
-------------
-AppArmor protects systems from insecure or untrusted processes by
-running them in restricted confinement, while still allowing processes
-to share files, exercise privilege and communicate with other processes.
-AppArmor is a Mandatory Access Control (MAC) mechanism which uses the
-Linux Security Module (LSM) framework. The confinement's restrictions
-are mandatory and are not bound to identity, group membership, or object
-ownership. The protections provided are in addition to the kernel's
-regular access control mechanisms (including DAC) and can be used to
-restrict the superuser.
-
-The AppArmor kernel module and accompanying user-space tools are
-available under the GPL license (the exception is the libapparmor
-library, available under the LGPL license, which allows change_hat(2)
-and change_profile(2) to be used by non-GPL binaries).
-
-For more information, you can read the techdoc.pdf (available after
-building the parser) and by visiting the https://apparmor.net/ web
-site.
-
-----------------
-Getting in Touch
-----------------
-
-Please send all complaints, feature requests, rants about the software,
-and questions to the
-[AppArmor mailing list](https://lists.ubuntu.com/mailman/listinfo/apparmor).
-
-Bug reports can be filed against the AppArmor project on
-[GitLab](https://gitlab.com/apparmor/apparmor/-/issues) or reported to the mailing
-list directly for those who wish not to register for an account on
-GitLab. See the
-[wiki page](https://gitlab.com/apparmor/apparmor/wikis/home#reporting-bugs)
-for more information.
-
-Security issues can be filed in GitLab by opening up a new [issue](https://gitlab.com/apparmor/apparmor/-/issues) and selecting the tick box ```This issue is confidential and should only be visible to team members with at least Reporter access.``` or directed to `security@apparmor.net`. Additional details can be found
-in the [wiki](https://gitlab.com/apparmor/apparmor/wikis/home#reporting-security-vulnerabilities).
-
-
---------------
-Privacy Policy
---------------
-
-The AppArmor security project respects users privacy and data and does not collect data from or on its users beyond what is required for a given component to function.
-
-The AppArmor kernel security module will log violations to the audit subsystem, and those will be logged/forwarded/recorded on the user's system(s) according to how the administrator has logging configured. Again this is not forwarded to or collected by the AppArmor project.
-
-The AppArmor userspace tools do not collect information on the system user beyond the logs and information needed to interact with the user. This is not forwarded to, nor collected by the AppArmor project.
-
-Users may submit information as part of an email, bug report or merge request, etc. and that will be recorded as part of the mailing list, bug/issue tracker, or code repository but only as part of a user initiated action.
-
-The AppArmor project does not collect information from contributors beyond their interactions with the AppArmor project, code, and community. However contributors are subject to the terms and conditions and privacy policy of the individual platforms (currently GitLab) should they choose to contribute through those platforms. And those platforms may collect data on the user that the AppArmor project does not.
-
-Currently GitLab requires a user account to submit patches or report bugs and issues. If a contributor does not wish to create an account for these platforms the mailing list is available. Membership in the list is not required. Content from non-list members will be sent to moderation, to ensure that it is on topic, so there may be a delay in choosing to interact in this way.
-
-
--------------
-Source Layout
--------------
-
-AppArmor consists of several different parts:
-
-```
-binutils/	source for basic utilities written in compiled languages
-changehat/	source for using changehat with Apache, PAM and Tomcat
-common/		common makefile rules
-desktop/	empty
-kernel-patches/	compatibility patches for various kernel versions
-libraries/	libapparmor source and language bindings
-parser/		source for parser/loader and corresponding documentation
-profiles/	configuration files, reference profiles and abstractions
-tests/		regression and stress testsuites
-utils/		high-level utilities for working with AppArmor
-```
-
---------------------------------------
-Important note on AppArmor kernel code
---------------------------------------
-
-While most of the kernel AppArmor code has been accepted in the
-upstream Linux kernel, a few important pieces were not included. These
-missing pieces unfortunately are important bits for AppArmor userspace
-and kernel interaction; therefore we have included compatibility
-patches in the kernel-patches/ subdirectory, versioned by upstream
-kernel (2.6.37 patches should apply cleanly to 2.6.38 source).
-
-Without these patches applied to the kernel, the AppArmor userspace
-will not function correctly.
-
-------------------------------------------
-Building and Installing AppArmor Userspace
-------------------------------------------
-
-To build and install AppArmor userspace on your system, build and install in
-the following order. Some systems may need to export various python-related
-environment variables to complete the build. For example, before building
-anything on these systems, use something along the lines of:
-
-```
-$ export PYTHONPATH=$(realpath libraries/libapparmor/swig/python)
-$ export PYTHON=/usr/bin/python3
-$ export PYTHON_VERSION=3
-$ export PYTHON_VERSIONS=python3
-```
-
-### libapparmor:
-
-```
-$ cd ./libraries/libapparmor
-$ sh ./autogen.sh
-$ sh ./configure --prefix=/usr --with-perl --with-python # see below
-$ make
-$ make check
-$ make install
-```
-
-[an additional optional argument to libapparmor's configure is --with-ruby, to
-generate Ruby bindings to libapparmor.]
-
-
-### Binary Utilities:
-
-```
-$ cd binutils
-$ make
-$ make check
-$ make install
-```
-
-### Parser:
-
-```
-$ cd parser
-$ make		# depends on libapparmor having been built first
-$ make check
-$ make install
-```
-
-
-### Utilities:
-
-```
-$ cd utils
-$ make
-$ make check PYFLAKES=/usr/bin/pyflakes3
-$ make install
-```
-
-### Apache mod_apparmor:
-
-```
-$ cd changehat/mod_apparmor
-$ make		# depends on libapparmor having been built first
-$ make install
-```
-
-
-### PAM AppArmor:
-
-```
-$ cd changehat/pam_apparmor
-$ make		# depends on libapparmor having been built first
-$ make install
-```
-
-
-### Profiles:
-
-```
-$ cd profiles
-$ make
-$ make check	# depends on the parser having been built first
-$ make install
-```
-
-Note that the empty local/* profile sniplets no longer get created by default.
-If you want them, run `make local` before running `make check`.
-
-[Note that for the parser, binutils, and utils, if you only wish to build/use
- some of the locale languages, you can override the default by passing
- the LANGS arguments to make; e.g. make all install "LANGS=en_US fr".]
-
--------------------
-AppArmor Testsuites
--------------------
-
-A number of testsuites are in the AppArmor sources. Most have documentation on
-usage and how to update and add tests. Below is a quick overview of their
-location and how to run them.
-
-
-Regression tests
-----------------
-For details on structure and adding tests, see
-tests/regression/apparmor/README.
-
-To run:
-
-### Regression tests - using apparmor userspace installed on host
-```
-$ cd tests/regression/apparmor (requires root)
-$ make USE_SYSTEM=1
-$ sudo make tests USE_SYSTEM=1
-$ sudo bash open.sh -r	 # runs and saves the last testcase from open.sh
-```
-
-### Regression tests - using apparmor userspace from the tree.
-- [build libapparmor](#libapparmor)
-- [build binutils](#binary-utilities)
-- [build apparmor parser](#parser)
-- [build Pam apparmor](#pam-apparmor)
-
-```
-$ cd tests/regression/apparmor (requires root)
-$ make
-$ sudo make tests
-$ sudo bash open.sh -r	 # runs and saves the last testcase from open.sh
-```
-
-Parser tests
-------------
-For details on structure and adding tests, see parser/tst/README.
-
-To run:
-
-```
-$ cd parser/tst
-$ make
-$ make tests
-```
-
-Libapparmor
------------
-For details on structure and adding tests, see libraries/libapparmor/README.
-
-```
-$ cd libraries/libapparmor
-$ make check
-```
-
-Utils
------
-Tests for the Python utilities exist in the test/ subdirectory.
-
-```
-$ cd utils
-$ make check
-```
-
-The aa-decode utility to be tested can be overridden by
-setting up environment variable APPARMOR_DECODE; e.g.:
-
-```
-$ APPARMOR_DECODE=/usr/bin/aa-decode make check
-```
-
-Profile checks
---------------
-A basic consistency check to ensure that the parser and aa-logprof parse
-successfully the current set of shipped profiles. The system or other
-parser and logprof can be passed in by overriding the PARSER and LOGPROF
-variables.
-
-```
-$ cd profiles
-$ make && make check
-```
-
-Stress Tests
-------------
-To run AppArmor stress tests:
-
-```
-$ make all
-```
-
-Use these:
-
-```
-$ ./change_hat
-$ ./child
-$ ./kill.sh
-$ ./open
-$ ./s.sh
-```
-
-Or run all at once:
-
-```
-$ ./stress.sh
-```
-
-Please note that the above will stress the system so much it may end up
-invoking the OOM killer.
-
-To run parser stress tests (requires /usr/bin/ruby):
-
-```
-$ ./stress.sh
-```
-
-(see stress.sh -h for options)
-
-Coverity Support
-----------------
-Coverity scans are available to AppArmor developers at
-https://scan.coverity.com/projects/apparmor.
-
-In order to submit a Coverity build for analysis, the cov-build binary
-must be discoverable from your PATH. See the "To Setup" section of
-https://scan.coverity.com/download?tab=cxx to obtain a pre-built copy of
-cov-build.
-
-To generate a compressed tarball of an intermediate Coverity directory:
-
-```
-$ make coverity
-```
-
-The compressed tarball is written to
-apparmor-<SNAPSHOT_VERSION>-cov-int.tar.gz, where <SNAPSHOT_VERSION>
-is something like 2.10.90~3328, and must be uploaded to
-https://scan.coverity.com/projects/apparmor/builds/new for analysis. You must
-include the snapshot version in Coverity's project build submission form, in
-the "Project Version" field, so that it is quickly obvious to all AppArmor
-developers what snapshot of the AppArmor repository was used for the analysis.
-
------------------------------------------------
-Building and Installing AppArmor Kernel Patches
------------------------------------------------
-
-TODO
-
-
------------------
-Required versions
------------------
-
-The AppArmor userspace utilities are written with some assumptions about
-installed and available versions of other tools. This is a (possibly
-incomplete) list of known version dependencies:
-
-The Python utilities require a minimum of Python 3.3.
-
-The aa-notify tool's Python dependencies can be satisfied by installing the
-following packages (Debian package names, other distros may vary):
-* python3-notify2
-* python3-psutil
-
-Perl is no longer needed since none of the utilities shipped to end users depend
-on it anymore.
-
-Most shell scripts are written for POSIX-compatible sh. aa-decode expects
-bash, probably version 3.2 and higher.

binutils/Makefile

@@ -1,178 +0,0 @@
-# ----------------------------------------------------------------------
-#    Copyright (c) 2015
-#    Canonical Ltd. (All rights reserved)
-#
-#    This program is free software; you can redistribute it and/or
-#    modify it under the terms of version 2 of the GNU General Public
-#    License published by the Free Software Foundation.
-#
-#    This program is distributed in the hope that it will be useful,
-#    but WITHOUT ANY WARRANTY; without even the implied warranty of
-#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#    GNU General Public License for more details.
-# ----------------------------------------------------------------------
-NAME=aa-binutils
-all:
-COMMONDIR=../common/
-
-include $(COMMONDIR)/Make.rules
-
-DESTDIR=/
-BINDIR=${DESTDIR}/usr/bin
-SBINDIR=${DESTDIR}/usr/sbin
-LOCALEDIR=/usr/share/locale
-MANPAGES=aa-enabled.1 aa-exec.1 aa-features-abi.1 aa-status.8
-
-WARNINGS = -Wall
-CPP_WARNINGS =
-ifndef CFLAGS
-CFLAGS	= -g -O2 -pipe
-
-ifdef DEBUG
-CFLAGS += -pg -D DEBUG
-endif
-ifdef COVERAGE
-CFLAGS = -g -pg -fprofile-arcs -ftest-coverage
-endif
-endif #CFLAGS
-
-EXTRA_CFLAGS = ${CFLAGS} ${CPPFLAGS} ${EXTRA_CXXFLAGS} ${CPP_WARNINGS} $(EXTRA_WARNINGS)
-
-#INCLUDEDIR = /usr/src/linux/include
-INCLUDEDIR =
-
-ifdef INCLUDEDIR
-	CFLAGS += -I$(INCLUDEDIR)
-endif
-
-# Internationalization support. Define a package and a LOCALEDIR
-EXTRA_CFLAGS+=-DPACKAGE=\"${NAME}\" -DLOCALEDIR=\"${LOCALEDIR}\"
-
-SRCS = aa_enabled.c aa_load.c
-HDRS =
-BINTOOLS = aa-enabled aa-exec aa-features-abi
-SBINTOOLS = aa-status aa-load
-
-AALIB = -Wl,-Bstatic -lapparmor  -Wl,-Bdynamic -lpthread
-
-ifdef WITH_LIBINTL
-	AALIB += -lintl
-endif
-
-ifdef USE_SYSTEM
-  # Using the system libapparmor so Makefile dependencies can't be used
-  LIBAPPARMOR_A =
-  INCLUDE_APPARMOR =
-  APPARMOR_H =
-  LIBAPPARMOR_LDFLAGS =
-else
-  LIBAPPARMOR_SRC = ../libraries/libapparmor/
-  LOCAL_LIBAPPARMOR_INCLUDE = $(LIBAPPARMOR_SRC)/include
-  LOCAL_LIBAPPARMOR_LDPATH = $(LIBAPPARMOR_SRC)/src/.libs
-
-  LIBAPPARMOR_A = $(LOCAL_LIBAPPARMOR_LDPATH)/libapparmor.a
-  INCLUDE_APPARMOR = -I$(LOCAL_LIBAPPARMOR_INCLUDE)
-  APPARMOR_H = $(LOCAL_LIBAPPARMOR_INCLUDE)/sys/apparmor.h
-  LIBAPPARMOR_LDFLAGS = -L$(LOCAL_LIBAPPARMOR_LDPATH)
-endif
-EXTRA_CFLAGS += $(INCLUDE_APPARMOR)
-LDFLAGS += $(LIBAPPARMOR_LDFLAGS)
-
-ifdef V
-  VERBOSE = 1
-endif
-ifndef VERBOSE
-  VERBOSE = 0
-endif
-ifeq ($(VERBOSE),1)
-  BUILD_OUTPUT =
-  Q =
-else
-  BUILD_OUTPUT = > /dev/null 2>&1
-  Q = @
-endif
-export Q VERBOSE BUILD_OUTPUT
-
-po/%.pot: %.c
-	$(MAKE) -C po $(@F) NAME=$* SOURCES=$*.c
-
-# targets arranged this way so that people who don't want full docs can
-# pick specific targets they want.
-arch: 	$(BINTOOLS) $(SBINTOOLS)
-
-manpages:	$(MANPAGES)
-
-docs:	manpages
-
-indep: docs
-	$(Q)$(MAKE) -C po all
-
-all:	arch indep
-
-.PHONY: coverage
-coverage:
-	$(MAKE) clean $(BINTOOLS) $(SBINTOOLS) COVERAGE=1
-
-ifndef USE_SYSTEM
-$(LIBAPPARMOR_A):
-	@if [ ! -f $@ ]; then \
-		echo "error: $@ is missing. Pick one of these possible solutions:" 1>&2; \
-		echo "  1) Build against the in-tree libapparmor by building it first and then trying again. See the top-level README for help." 1>&2; \
-		echo "  2) Build against the system libapparmor by adding USE_SYSTEM=1 to your make command." 1>&2;\
-		exit 1; \
-	fi
-endif
-
-aa-features-abi: aa_features_abi.c $(LIBAPPARMOR_A)
-	$(CC) $(LDFLAGS) $(EXTRA_CFLAGS) -o $@ $< $(LIBS) $(AALIB)
-
-aa-load: aa_load.c $(LIBAPPARMOR_A)
-	$(CC) $(LDFLAGS) $(EXTRA_CFLAGS) -o $@ $< $(LIBS) $(AALIB)
-
-aa-enabled: aa_enabled.c $(LIBAPPARMOR_A)
-	$(CC) $(LDFLAGS) $(EXTRA_CFLAGS) -o $@ $< $(LIBS) $(AALIB) 
-
-aa-exec: aa_exec.c $(LIBAPPARMOR_A)
-	$(CC) $(LDFLAGS) $(EXTRA_CFLAGS) -o $@ $< $(LIBS) $(AALIB)
-
-aa-status: aa_status.c cJSON.o $(LIBAPPARMOR_A)
-	$(CC) $(LDFLAGS) $(EXTRA_CFLAGS) -o $@ $< $(LIBS) $(AALIB) cJSON.o
-
-cJSON.o: cJSON.c cJSON.h
-	$(CC) $(EXTRA_CFLAGS) -c -o $@ $<
-
-.SILENT: check
-.PHONY: check
-check: check_pod_files tests
-
-.SILENT: tests
-tests: $(BINTOOLS) $(SBINTOOLS) $(TESTS)
-	echo "no tests atm"
-
-.PHONY: install
-install: install-indep install-arch
-
-.PHONY: install-arch
-install-arch: arch
-	install -m 755 -d ${BINDIR}
-	install -m 755 ${BINTOOLS} ${BINDIR}
-	install -m 755 -d ${SBINDIR}
-	ln -sf aa-status ${SBINDIR}/apparmor_status
-	install -m 755 ${SBINTOOLS} ${SBINDIR}
-
-.PHONY: install-indep
-install-indep: indep
-	$(MAKE) -C po install NAME=${NAME} DESTDIR=${DESTDIR}
-	$(MAKE) install_manpages DESTDIR=${DESTDIR}
-	ln -sf aa-status.8 ${DESTDIR}/${MANDIR}/man8/apparmor_status.8
-
-ifndef VERBOSE
-.SILENT: clean
-endif
-.PHONY: clean
-clean: pod_clean
-	rm -f core core.* *.o *.s *.a *~ *.gcda *.gcno
-	rm -f gmon.out
-	rm -f $(BINTOOLS) $(SBINTOOLS) $(TESTS)
-	$(MAKE) -s -C po clean
-

binutils/aa-enabled.pod

@@ -1,103 +0,0 @@
-# This publication is intellectual property of Canonical Ltd. Its contents
-# can be duplicated, either in part or in whole, provided that a copyright
-# label is visibly located on each copy.
-#
-# All information found in this book has been compiled with utmost
-# attention to detail. However, this does not guarantee complete accuracy.
-# Neither Canonical Ltd, the authors, nor the translators shall be held
-# liable for possible errors or the consequences thereof.
-#
-# Many of the software and hardware descriptions cited in this book
-# are registered trademarks. All trade names are subject to copyright
-# restrictions and may be registered trade marks. Canonical Ltd
-# essentially adheres to the manufacturer's spelling.
-#
-# Names of products and trademarks appearing in this book (with or without
-# specific notation) are likewise subject to trademark and trade protection
-# laws and may thus fall under copyright restrictions.
-#
-
-
-=pod
-
-=head1 NAME
-
-aa-enabled - test whether AppArmor is enabled
-
-=head1 SYNOPSIS
-
-B<aa-enabled> [options]
-
-=head1 DESCRIPTION
-
-B<aa-enabled> is used to determine if AppArmor is enabled.
-
-=head1 OPTIONS
-
-B<aa-enabled> accepts the following arguments:
-
-=over 4
-
-=item -h, --help
-
-Display a brief usage guide.
-
-=item -q, --quiet
-
-Do not output anything to stdout. This option is intended to be used by
-scripts that simply want to use the exit code to determine if AppArmor is
-enabled.
-
-=item -x, --exclusive
-
-Require AppArmor to have exclusive access to shared LSM interfaces to
-be considered enabled.
-
-=back
-
-=head1 EXIT STATUS
-
-Upon exiting, B<aa-enabled> will set its exit status to the following values:
-
-=over 4
-
-=item B<0>
-
-if AppArmor is enabled.
-
-=item B<1>
-
-if AppArmor is not enabled/loaded.
-
-=item B<2>
-
-intentionally not used as an B<aa-enabled> exit status.
-
-=item B<3>
-
-if the AppArmor control files aren't available under /sys/kernel/security/.
-
-=item B<4>
-
-if B<aa-enabled> doesn't have enough privileges to read the apparmor control files.
-
-=item B<10>
-
-AppArmor is enabled but does not have access to shared LSM interfaces.
-
-=item B<64>
-
-if any unexpected error or condition is encountered.
-
-=back
-
-=head1 BUGS
-
-If you find any bugs, please report them at
-L<https://gitlab.com/apparmor/apparmor/-/issues>.
-
-=head1 SEE ALSO
-
-apparmor(7), apparmor.d(5), aa_is_enabled(2), and L<https://wiki.apparmor.net>.
-
-=cut

binutils/aa-exec.pod

@@ -1,93 +0,0 @@
-# This publication is intellectual property of Canonical Ltd. Its contents
-# can be duplicated, either in part or in whole, provided that a copyright
-# label is visibly located on each copy.
-#
-# All information found in this book has been compiled with utmost
-# attention to detail. However, this does not guarantee complete accuracy.
-# Neither Canonical Ltd, the authors, nor the translators shall be held
-# liable for possible errors or the consequences thereof.
-#
-# Many of the software and hardware descriptions cited in this book
-# are registered trademarks. All trade names are subject to copyright
-# restrictions and may be registered trade marks. Canonical Ltd
-# essentially adheres to the manufacturer's spelling.
-#
-# Names of products and trademarks appearing in this book (with or without
-# specific notation) are likewise subject to trademark and trade protection
-# laws and may thus fall under copyright restrictions.
-#
-
-
-=pod
-
-=head1 NAME
-
-aa-exec - confine a program with the specified AppArmor profile
-
-=head1 SYNOPSIS
-
-B<aa-exec> [options] [--] [I<E<lt>commandE<gt>> ...]
-
-=head1 DESCRIPTION
-
-B<aa-exec> is used to launch a program confined by the specified profile
-and or namespace.  If both a profile and namespace are specified command
-will be confined by profile in the new policy namespace.  If only a namespace
-is specified, the profile name of the current confinement will be used.  If
-neither a profile or namespace is specified command will be run using
-standard profile attachment (ie. as if run without the aa-exec command).
-
-If the arguments are to be pasted to the I<E<lt>commandE<gt>> being invoked
-by aa-exec then -- should be used to separate aa-exec arguments from the
-command.
-  aa-exec -p profile1 -- ls -l
-
-=head1 OPTIONS
-B<aa-exec> accepts the following arguments:
-
-=over 4
-
-=item -p PROFILE, --profile=PROFILE
-
-confine I<E<lt>commandE<gt>> with PROFILE. If the PROFILE is not specified
-use the current profile name (likely unconfined).
-
-=item -n NAMESPACE, --namespace=NAMESPACE
-
-use profiles in NAMESPACE.  This will result in confinement transitioning
-to using the new profile namespace.
-
-=item -i, --immediate
-
-transition to PROFILE before doing executing I<E<lt>commandE<gt>>.  This
-subjects the running of I<E<lt>commandE<gt>> to the exec transition rules
-of the current profile.
-
-=item -v, --verbose
-
-show commands being performed
-
-=item -d, --debug
-
-show commands and error codes
-
-=item --
-
-Signal the end of options and disables further option processing. Any
-arguments after the -- are treated as arguments of the command.  This is
-useful when passing arguments to the I<E<lt>commandE<gt>> being invoked by
-aa-exec.
-
-=back
-
-=head1 BUGS
-
-If you find any bugs, please report them at
-L<https://gitlab.com/apparmor/apparmor/-/issues>
-
-=head1 SEE ALSO
-
-aa-stack(8), aa-namespace(8), apparmor(7), apparmor.d(5), aa_change_profile(3),
-aa_change_onexec(3) and L<https://wiki.apparmor.net>.
-
-=cut

binutils/aa-features-abi.pod

@@ -1,97 +0,0 @@
-# This publication is intellectual property of Canonical Ltd. Its contents
-# can be duplicated, either in part or in whole, provided that a copyright
-# label is visibly located on each copy.
-#
-# All information found in this book has been compiled with utmost
-# attention to detail. However, this does not guarantee complete accuracy.
-# Neither Canonical Ltd, the authors, nor the translators shall be held
-# liable for possible errors or the consequences thereof.
-#
-# Many of the software and hardware descriptions cited in this book
-# are registered trademarks. All trade names are subject to copyright
-# restrictions and may be registered trade marks. Canonical Ltd
-# essentially adheres to the manufacturer's spelling.
-#
-# Names of products and trademarks appearing in this book (with or without
-# specific notation) are likewise subject to trademark and trade protection
-# laws and may thus fall under copyright restrictions.
-#
-
-
-=pod
-
-=head1 NAME
-
-aa-features-abi - Extract, validate and manipulate AppArmor feature abis
-
-=head1 SYNOPSIS
-
-B<aa-features-abi> [OPTIONS] <SOURCE> [OUTPUT OPTIONS]
-
-=head1 DESCRIPTION
-
-B<aa-features-abi> is used to extract a features abi and output to
-either stdout or a specified file. A SOURCE_OPTION must be specified.
-If an output option is not specified the features abi is written to
-stdout.
-
-=head1 OPTIONS
-
-B<aa-features-abi> accepts the following arguments:
-
-=over 4
-
-=item -h, --help
-
-Display a brief usage guide.
-
-=item -d, --debug
-
-show messages with debugging information
-
-=item -v, --verbose
-
-show messages with stats
-
-=back
-
-=head1 SOURCE
-
-=over 4
-
-=item -x, --extract
-
-Extract the features abi for the kernel
-
-=item -f FILE, --file=FILE
-
-Load the features abi from FILE and send it to OUTPUT OPTIONS.
-
-=back
-
-=head1 OUTPUT OPTIONS
-
-=over 4
-
-=item --stdout
-
-Write the features abi to I<stdout>, this is the default if no output option
-is specified.
-
-=item -w FILE, --write FILE
-
-Write the features abi to I<FILE>.
-
-=back
-
-
-=head1 BUGS
-
-If you find any bugs, please report them at
-L<https://gitlab.com/apparmor/apparmor/-/issues>.
-
-=head1 SEE ALSO
-
-apparmor(7), apparmor.d(5), aa_features(3), and L<https://wiki.apparmor.net>.
-
-=cut

binutils/aa_enabled.c

@@ -1,100 +0,0 @@
-/*
- *   Copyright (C) 2015 Canonical Ltd.
- *
- *   This program is free software; you can redistribute it and/or
- *    modify it under the terms of version 2 of the GNU General Public
- *   License published by the Free Software Foundation.
- */
-
-#include <errno.h>
-#include <locale.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <libintl.h>
-#define _(s) gettext(s)
-
-#include <sys/apparmor.h>
-
-void print_help(const char *command)
-{
-	printf(_("%s: [options]\n"
-		 "  options:\n"
-		 "  -x | --exclusive    Shared interfaces must be available\n"
-		 "  -q | --quiet        Don't print out any messages\n"
-		 "  -h | --help         Print help\n"),
-	       command);
-	exit(1);
-}
-
-
-/* Exit statuses and meanings are documented in the aa-enabled.pod file */
-static void exit_with_error(int saved_errno, int quiet)
-{
-	switch(saved_errno) {
-	case ENOSYS:
-		if (!quiet)
-			printf(_("No - not available on this system.\n"));
-		exit(1);
-	case ECANCELED:
-		if (!quiet)
-			printf(_("No - disabled at boot.\n"));
-		exit(1);
-	case ENOENT:
-		if (!quiet)
-			printf(_("Maybe - policy interface not available.\n"));
-		exit(3);
-	case EPERM:
-	case EACCES:
-		if (!quiet)
-			printf(_("Maybe - insufficient permissions to determine availability.\n"));
-		exit(4);
-	case EBUSY:
-		if (!quiet)
-			printf(_("Partially - public shared interfaces are not available.\n"));
-		exit(10);
-	}
-	if (!quiet)
-		printf(_("Error - %s\n"), strerror(saved_errno));
-	exit(64);
-}
-
-int main(int argc, char **argv)
-{
-	int i, enabled;
-	int quiet = 0;
-	int require_shared = 0;
-
-	setlocale(LC_MESSAGES, "");
-	bindtextdomain(PACKAGE, LOCALEDIR);
-	textdomain(PACKAGE);
-
-	if (argc > 3) {
-		printf(_("unknown or incompatible options\n"));
-		print_help(argv[0]);
-	}
-	for (i = 1; i < argc; i++) {
-		if (strcmp(argv[i], "--quiet") == 0 ||
-		    strcmp(argv[i], "-q") == 0) {
-			quiet = 1;
-		} else if (strcmp(argv[i], "--exclusive") == 0 ||
-		    strcmp(argv[i], "-x") == 0) {
-			require_shared = 1;
-		} else if (strcmp(argv[i], "--help") == 0 ||
-			   strcmp(argv[i], "-h") == 0) {
-			print_help(argv[0]);
-		} else {
-			printf(_("unknown option '%s'\n"), argv[1]);
-			print_help(argv[0]);
-		}
-	}
-
-	enabled = aa_is_enabled();
-	if (!enabled) {
-		if (require_shared || errno != EBUSY)
-			exit_with_error(errno, quiet);
-	}
-	if (!quiet)
-		printf(_("Yes\n"));
-	exit(0);
-}

binutils/aa_exec.c

@@ -1,232 +0,0 @@
-/*
- *   Copyright (c) 2015
- *   Canonical, Ltd. (All rights reserved)
- *
- *   This program is free software; you can redistribute it and/or
- *   modify it under the terms of version 2 of the GNU General Public
- *   License published by the Free Software Foundation.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, contact Novell, Inc. or Canonical
- *   Ltd.
- */
-
-#include <errno.h>
-#include <getopt.h>
-#include <libintl.h>
-#include <limits.h>
-#include <stdio.h>
-#include <stdarg.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/apparmor.h>
-#include <sys/types.h>
-#include <unistd.h>
-#define _(s) gettext(s)
-
-static const char *opt_profile = NULL;
-static const char *opt_namespace = NULL;
-static bool opt_debug = false;
-static bool opt_immediate = false;
-static bool opt_verbose = false;
-static pid_t pid = 0;
-
-static void usage(const char *name, bool error)
-{
-	FILE *stream = stdout;
-	int status = EXIT_SUCCESS;
-
-	if (error) {
-		stream = stderr;
-		status = EXIT_FAILURE;
-	}
-
-	fprintf(stream,
-		_("USAGE: %s [OPTIONS] <prog> <args>\n"
-		"\n"
-		"Confine <prog> with the specified PROFILE.\n"
-		"\n"
-		"OPTIONS:\n"
-		"  -p PROFILE, --profile=PROFILE		PROFILE to confine <prog> with\n"
-		"  -n NAMESPACE, --namespace=NAMESPACE	NAMESPACE to confine <prog> in\n"
-		"  -d, --debug				show messages with debugging information\n"
-		"  -i, --immediate			change profile immediately instead of at exec\n"
-		"  -v, --verbose				show messages with stats\n"
-		"  -h, --help				display this help\n"
-		"\n"), name);
-	exit(status);
-}
-
-#define error(fmt, args...) _error(_("[%ld] aa-exec: ERROR: " fmt "\n"), (long)pid, ## args)
-static void _error(const char *fmt, ...)
-{
-	va_list args;
-
-	va_start(args, fmt);
-	vfprintf(stderr, fmt, args);
-	va_end(args);
-	exit(EXIT_FAILURE);
-}
-
-#define debug(fmt, args...) _debug(_("[%ld] aa-exec: DEBUG: " fmt "\n"), (long)pid, ## args)
-static void _debug(const char *fmt, ...)
-{
-	va_list args;
-
-	if (!opt_debug)
-		return;
-
-	va_start(args, fmt);
-	vfprintf(stderr, fmt, args);
-	va_end(args);
-}
-
-#define verbose(fmt, args...) _verbose(_("[%ld] " fmt "\n"), (long)pid, ## args)
-static void _verbose(const char *fmt, ...)
-{
-	va_list args;
-
-	if (!opt_verbose)
-		return;
-
-	va_start(args, fmt);
-	vfprintf(stderr, fmt, args);
-	va_end(args);
-}
-
-static void verbose_print_argv(char **argv)
-{
-	if (!opt_verbose)
-		return;
-
-	fprintf(stderr, _("[%ld] exec"), (long)pid);
-	for (; *argv; argv++)
-		fprintf(stderr, " %s", *argv);
-	fprintf(stderr, "\n");
-}
-
-static char **parse_args(int argc, char **argv)
-{
-	int opt;
-	struct option long_opts[] = {
-		{"debug", no_argument, 0, 'd'},
-		{"help", no_argument, 0, 'h'},
-		{"profile", required_argument, 0, 'p'},
-		{"namespace", required_argument, 0, 'n'},
-		{"immediate", no_argument, 0, 'i'},
-		{"verbose", no_argument, 0, 'v'},
-	};
-
-	while ((opt = getopt_long(argc, argv, "+dhp:n:iv", long_opts, NULL)) != -1) {
-		switch (opt) {
-		case 'd':
-			opt_debug = true;
-			break;
-		case 'h':
-			usage(argv[0], false);
-			break;
-		case 'p':
-			if (opt_profile)
-				error("Multiple -p/--profile parameters given");
-			opt_profile = optarg;
-			break;
-		case 'n':
-			if (opt_namespace)
-				error("Multiple -n/--namespace parameters given");
-			opt_namespace = optarg;
-			break;
-		case 'i':
-			opt_immediate = true;
-			break;
-		case 'v':
-			opt_verbose = true;
-			break;
-		default:
-			usage(argv[0], true);
-			break;
-		}
-	}
-
-	if (optind >= argc)
-		usage(argv[0], true);
-
-	return argv + optind;
-}
-
-static void build_name(char *name, size_t name_len,
-		       const char *namespace, const char *profile)
-{
-	size_t required_len = 1; /* reserve 1 byte for NUL-terminator */
-
-	if (namespace)
-		required_len += 1 + strlen(namespace) + 3; /* :<NAMESPACE>:// */
-
-	if (profile)
-		required_len += strlen(profile);
-
-	if (required_len > name_len)
-		error("name too long (%zu > %zu)", required_len, name_len);
-
-	name[0] = '\0';
-
-	if (namespace) {
-		strcat(name, ":");
-		strcat(name, namespace);
-		strcat(name, "://");
-	}
-
-	if (profile)
-		strcat(name, profile);
-}
-
-int main(int argc, char **argv)
-{
-	char name[PATH_MAX];
-	int rc = 0;
-
-	/* IMPORTANT: pid must be initialized before doing anything else since
-	 * it is used in a global context when printing messages
-	 */
-	pid = getpid();
-
-	argv = parse_args(argc, argv);
-
-	if (opt_namespace || opt_profile)
-		build_name(name, sizeof(name), opt_namespace, opt_profile);
-	else
-		goto exec;
-
-	if (opt_immediate) {
-		verbose("aa_change_profile(\"%s\")", name);
-		rc = aa_change_profile(name);
-		debug("%d = aa_change_profile(\"%s\")", rc, name);
-	} else {
-		verbose("aa_change_onexec(\"%s\")", name);
-		rc = aa_change_onexec(name);
-		debug("%d = aa_change_onexec(\"%s\")", rc, name);
-	}
-
-	if (rc) {
-		if (errno == ENOENT) {
-			error("%s '%s' does not exist",
-			      opt_profile ? "profile" : "namespace", name);
-		} else if (errno == EACCES) {
-			error("insufficient permissions to change to the %s '%s'",
-			      opt_profile ? "profile" : "namespace", name);
-		} else if (errno == EINVAL) {
-			error("AppArmor interface not available");
-		} else {
-			error("%m");
-		}
-	}
-
-exec:
-	verbose_print_argv(argv);
-	execvp(argv[0], argv);
-	error("Failed to execute \"%s\": %m", argv[0]);
-}

binutils/aa_features_abi.c

@@ -1,207 +0,0 @@
-/*
- *   Copyright (c) 2020
- *   Canonical, Ltd. (All rights reserved)
- *
- *   This program is free software; you can redistribute it and/or
- *   modify it under the terms of version 2 of the GNU General Public
- *   License published by the Free Software Foundation.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, contact Canonical Ltd.
- */
-
-#include <errno.h>
-#include <fcntl.h>
-#include <getopt.h>
-#include <libintl.h>
-#include <limits.h>
-#include <stdio.h>
-#include <stdarg.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/apparmor.h>
-#include <sys/stat.h>
-#include <sys/types.h>
-#include <unistd.h>
-#define _(s) gettext(s)
-
-#include "../libraries/libapparmor/src/private.h"
-
-static const char *progname = NULL;
-static const char *opt_file = NULL;
-static const char *opt_write = NULL;
-static bool opt_debug = false;
-static bool opt_verbose = false;
-static bool opt_extract = false;
-
-static void usage(const char *name, bool error)
-{
-	FILE *stream = stdout;
-	int status = EXIT_SUCCESS;
-
-	if (error) {
-		stream = stderr;
-		status = EXIT_FAILURE;
-	}
-
-	fprintf(stream,
-		_("USAGE: %s [OPTIONS] <SOURCE> [OUTPUT OPTIONS]\n"
-		  "\n"
-		  "Output AppArmor feature abi from SOURCE to OUTPUT"
-		  "\n"
-		  "OPTIONS:\n"
-#if 0
-		  "  -d, --debug      show messages with debugging information\n"
-		  "  -v, --verbose    show messages with stats\n"
-#endif
-		  "  -h, --help       display this help\n"
-		  "SOURCE:\n"
-		  "  -f F, --file=F   load features abi from file F\n"
-		  "  -x, --extract    extract features abi from the kernel\n"
-		  "OUTPUT OPTIONS:\n"
-		  "  --stdout         default, write features to stdout\n"
-		  "  -w F, --write=F  write features abi to the file F instead of stdout\n"
-		  "\n"), name);
-	exit(status);
-}
-
-#define error(fmt, args...) _error(_("%s: ERROR: " fmt " - %m\n"), progname, ## args)
-static void _error(const char *fmt, ...)
-{
-	va_list args;
-
-	va_start(args, fmt);
-	vfprintf(stderr, fmt, args);
-	va_end(args);
-	exit(EXIT_FAILURE);
-}
-
-#if 0
-#define debug(fmt, args...) _debug(_("%s: DEBUG: " fmt "\n"), progname, ## args)
-static void _debug(const char *fmt, ...)
-{
-	va_list args;
-
-	if (!opt_debug)
-		return;
-
-	va_start(args, fmt);
-	vfprintf(stderr, fmt, args);
-	va_end(args);
-}
-
-#define verbose(fmt, args...) _verbose(_(fmt "\n"), ## args)
-static void _verbose(const char *fmt, ...)
-{
-	va_list args;
-
-	if (!opt_verbose)
-		return;
-
-	va_start(args, fmt);
-	vfprintf(stderr, fmt, args);
-	va_end(args);
-}
-#endif
-
-#define ARG_STDOUT 128
-
-static char **parse_args(int argc, char **argv)
-{
-	int opt;
-	struct option long_opts[] = {
-		{"debug", no_argument, 0, 'd'},
-		{"verbose", no_argument, 0, 'v'},
-		{"help", no_argument, 0, 'h'},
-		{"extract", no_argument, 0, 'x'},
-		{"file", required_argument, 0, 'f'},
-		{"write", required_argument, 0, 'w'},
-		{"stdout", no_argument, 0, ARG_STDOUT},
-	};
-
-	while ((opt = getopt_long(argc, argv, "+dvhxf:l:w:", long_opts, NULL)) != -1) {
-		switch (opt) {
-		case 'd':
-			opt_debug = true;
-			break;
-		case 'v':
-			opt_verbose = true;
-			break;
-		case 'h':
-			usage(argv[0], false);
-			break;
-		case 'x':
-			opt_extract = true;
-			break;
-		case 'f':
-			opt_file = optarg;
-			break;
-		case 'w':
-			opt_write = optarg;
-			break;
-		case ARG_STDOUT:
-			opt_write = NULL;
-			break;
-		default:
-			usage(argv[0], true);
-			break;
-		}
-	}
-
-	return argv + optind;
-}
-
-
-/* TODO: add features intersection and testing */
-
-int main(int argc, char **argv)
-{
-	struct aa_features *features;
-	autoclose int in = -1;
-	autoclose int out = -1;
-	int rc = 0;
-
-	progname = argv[0];
-
-	argv = parse_args(argc, argv);
-
-	if (!opt_extract && !opt_file)
-		usage(argv[0], true);
-	if (opt_extract && opt_file) {
-		error("options --extract and --file are mutually exclusive");
-	}
-	if (opt_extract) {
-		rc = aa_features_new_from_kernel(&features);
-		if (rc == -1)
-			error("failed to extract features abi from the kernel");
-	}
-	if (opt_file) {
-		in = open(opt_file, O_RDONLY);
-		if (in == -1)
-			error("failed to open file '%s'", opt_file);
-		rc = aa_features_new_from_file(&features, in);
-		if (rc == -1)
-			error("failed to load features abi from file '%s'", opt_file);
-	}
-	
-
-	if (opt_write) {
-		out = open(opt_write, O_WRONLY | O_CREAT, 00600);
-		if (out == -1)
-			error("failed to open output file '%s'", opt_write);
-	} else {
-		out = fileno(stdout);
-		if (out == -1)
-			error("failed to get stdout");
-	}	
-	rc = aa_features_write_to_fd(features, out);
-	if (rc == -1)
-		error("failed to write features abi");
-
-	return 0;
-}

binutils/aa_load.c

@@ -1,408 +0,0 @@
-/*
- *   Copyright (C) 2020 Canonical Ltd.
- *
- *   This program is free software; you can redistribute it and/or
- *   modify it under the terms of version 2 of the GNU General Public
- *   License published by the Free Software Foundation.
- */
-
-#define _GNU_SOURCE /* for asprintf() */
-#include <stdio.h>
-#include <errno.h>
-#include <getopt.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <stdarg.h>
-#include <stddef.h>
-#include <fcntl.h>
-#include <string.h>
-#include <dirent.h>
-
-#include <sys/types.h>
-#include <sys/stat.h>
-
-#include <sys/apparmor.h>
-
-#include <libintl.h>
-#define _(s) gettext(s)
-
-/* TODO: implement config locations - value can change */
-#define DEFAULT_CONFIG_LOCATIONS "/etc/apparmor/parser.conf"
-#define DEFAULT_POLICY_LOCATIONS "/var/cache/apparmor:/etc/apparmor.d/cache.d:/etc/apparmor.d/cache"
-#define CACHE_FEATURES_FILE ".features"
-
-bool opt_debug = false;
-bool opt_verbose = false;
-bool opt_dryrun = false;
-bool opt_force = false;
-bool opt_config = false;
-
-#define warning(fmt, args...) _error(_("aa-load: WARN: " fmt "\n"), ## args)
-#define error(fmt, args...) _error(_("aa-load: ERROR: " fmt "\n"), ## args)
-static void _error(const char *fmt, ...)
-{
-	va_list args;
-
-	va_start(args, fmt);
-	vfprintf(stderr, fmt, args);
-	va_end(args);
-}
-
-#define verbose(fmt, args...) _debug(opt_verbose, _(fmt "\n"), ## args)
-#define debug(fmt, args...) _debug(opt_debug, _("aa-load: DEBUG: " fmt "\n"), ## args)
-static void _debug(bool opt_displayit, const char *fmt, ...)
-{
-	va_list args;
-
-	if (!opt_displayit)
-		return;
-
-	va_start(args, fmt);
-	vfprintf(stderr, fmt, args);
-	va_end(args);
-}
-
-static int have_enough_privilege(const char *command)
-{
-	uid_t uid, euid;
-
-	uid = getuid();
-	euid = geteuid();
-
-	if (uid != 0 && euid != 0) {
-		error("%s: Sorry. You need root privileges to run this program.\n",
-		      command);
-		return EPERM;
-	}
-
-	if (uid != 0 && euid == 0) {
-		error("%s: Aborting! You've set this program setuid root.\n"
-		      "Anybody who can run this program can update "
-		      "your AppArmor profiles.\n", command);
-		exit(EXIT_FAILURE);
-	}
-
-	return 0;
-}
-
-
-static int load_config(const char *file)
-{
-	/* TODO */
-	return ENOENT;
-}
-
-/**
- * load a single policy cache file to the kernel
- */
-static int load_policy_file(const char *file)
-{
-	int rc = 0;
-
-	struct aa_kernel_interface *kernel_interface;
-
-	if (aa_kernel_interface_new(&kernel_interface, NULL, NULL)) {
-		rc = -errno;
-		error("Failed to open kernel interface '%s': %m", file);
-		return rc;
-	}
-	if (!opt_dryrun &&
-	    aa_kernel_interface_replace_policy_from_file(kernel_interface,
-							 AT_FDCWD, file)) {
-		rc = -errno;
-		error("Failed to load policy into kernel '%s': %m", file);
-	}
-	aa_kernel_interface_unref(kernel_interface);
-
-	return rc;
-}
-
-static void validate_features(const char *dir_path)
-{
-	aa_features *kernel_features;
-
-	if (aa_features_new_from_kernel(&kernel_features) == -1) {
-		error("Failed to obtain features: %m");
-		return;
-	}
-
-	if (aa_features_check(AT_FDCWD, dir_path, kernel_features) == -1) {
-		if (errno == ENOENT) {
-			/* features file does not exist
-			 * not an issue when loading cache policies from dir
-			 */
-		}
-		else if (errno == EEXIST) {
-			warning("Overlay features do not match kernel features");
-		}
-	}
-	aa_features_unref(kernel_features);
-}
-
-/**
- * load a directory of policy cache files to the kernel
- * This does not do a subdir search to find the kernel match but
- * tries to load the dir regardless of whether its features match
- *
- * The hierarchy looks like
- *
- * dir/
- *     .features
- *     profile1
- *     ...
- */
-
-static int load_policy_dir(const char *dir_path)
-{
-	DIR *d;
-	struct dirent *dir;
-	int rc = 0;
-	char *file;
-	size_t len;
-
-	validate_features(dir_path);
-
-	d = opendir(dir_path);
-	if (!d) {
-		rc = -errno;
-		error("Failed to open directory '%s': %m", dir_path);
-		return rc;
-	}
-
-	while ((dir = readdir(d)) != NULL) {
-		/* Only check regular files for now */
-		if (dir->d_type == DT_REG) {
-			len = strnlen(dir->d_name, PATH_MAX);
-			/* Ignores .features */
-			if (strncmp(dir->d_name, CACHE_FEATURES_FILE, len) == 0) {
-				continue;
-			}
-			if (asprintf(&file, "%s/%s", dir_path, dir->d_name) == -1) {
-				error("Failure allocating memory");
-				closedir(d);
-				return -1;
-			}
-			load_policy_file(file);
-			free(file);
-			file = NULL;
-		}
-	}
-	closedir(d);
-	return 0;
-}
-
-
-/**
- * load_hashed_policy - find policy hashed dir and load it
- *
- * load/replace all policy from a policy hierarchy directory
- *
- * Returns: 0 on success < -errno
- *
- * It will find the subdir that matches the kernel and load all
- * precompiled policy files from it.
- *
- * The hierarchy looks something like
- *
- * location/
- *          kernel_hash1.0/
- *                         .features
- *                         profile1
- *                         ...
- *          kernel_hash2.0/
- *                        .features
- *                        profile1
- *                        ...
- */
-static int load_policy_by_hash(const char *location)
-{
-	aa_policy_cache *policy_cache = NULL;
-	int rc;
-
-	if ((rc = aa_policy_cache_new(&policy_cache, NULL, AT_FDCWD, location, 0))) {
-		rc = -errno;
-		error("Failed to open policy cache '%s': %m", location);
-		return rc;
-	}
-
-	if (opt_debug) {
-		/* show hash directory under location that matches the
-		 * current kernel
-		 */
-		char *cache_loc = aa_policy_cache_dir_path_preview(NULL, AT_FDCWD, location);
-		if (!cache_loc) {
-			rc = -errno;
-			error("Failed to find cache location '%s': %m", location);
-			goto out;
-		}
-		debug("Loading cache from '%s'\n", cache_loc);
-		free(cache_loc);
-	}
-
-	if (!opt_dryrun) {
-		if ((rc = aa_policy_cache_replace_all(policy_cache, NULL)) < 0) {
-			error("Failed to load policy cache '%s': %m", location);
-		} else {
-			verbose("Success - Loaded policy cache '%s'", location);
-		}
-	}
-
-out:
-	aa_policy_cache_unref(policy_cache);
-
-	return rc;
-}
-
-/**
- * load_arg - calls specific load functions for files and directories
- *
- * load/replace all policy files/dir in arg
- *
- * Returns: 0 on success, 1 on failure.
- *
- * It will load by hash subtree first, and fallback to a cache dir
- * If not a directory, it will try to load it as a cache file
- */
-static int load_arg(char *arg)
-{
-	char **location = NULL;
-	int i, n, rc = 0;
-
-
-	/* arg can specify an overlay of multiple cache locations */
-	if ((n = aa_split_overlay_str(arg, &location, 0, true)) == -1) {
-		error("Failed to parse overlay locations: %m");
-		return 1;
-	}
-
-	for (i = 0; i < n; i++) {
-		struct stat st;
-		debug("Trying to open %s", location[i]);
-		if (stat(location[i], &st) == -1) {
-			error("Failed stat of '%s': %m", location[i]);
-			rc = 1;
-			continue;
-		}
-		if (S_ISDIR(st.st_mode)) {
-			/* try hash dir subtree first */
-			if (load_policy_by_hash(location[i]) < 0) {
-				error("Failed load policy by hash '%s': %m", location[i]);
-				rc = 1;
-			}
-			/* fall back to cache dir */
-			if (load_policy_dir(location[i]) < 0) {
-				error("Failed load policy by directory '%s': %m", location[i]);
-				rc = 1;
-			}
-
-		} else if (load_policy_file(location[i]) < 0) {
-			rc = 1;
-		}
-	}
-
-	for (i = 0; i < n; i++)
-		free(location[i]);
-	free(location);
-	return rc;
-}
-
-static void print_usage(const char *command)
-{
-	printf("Usage: %s [OPTIONS] (cache file|cache dir|cache base dir)]*\n"
-	       "Load Precompiled AppArmor policy from a cache location or \n"
-	       "locations.\n\n"
-	       "Options:\n"
-	       "  -f, --force     load policy even if abi does not match the kernel\n"
-	       "  -d, --debug     display debug messages\n"
-	       "  -v, --verbose   display progress and error messages\n"
-	       "  -n, --dry-run   do everything except actual load\n"
-	       "  -h, --help      this message\n",
-	       command);
-}
-
-static const char *short_options = "c:dfvnh";
-struct option long_options[] = {
-	{"config",	1, 0, 'c'},
-	{"debug",	0, 0, 'd'},
-	{"force",	0, 0, 'f'},
-	{"verbose",	0, 0, 'v'},
-	{"dry-run",	0, 0, 'n'},
-	{"help",	0, 0, 'h'},
-	{NULL, 0, 0, 0},
-};
-
-static int process_args(int argc, char **argv)
-{
-	int c, o;
-
-	opterr = 1;
-	while ((c = getopt_long(argc, argv, short_options, long_options, &o)) != -1) {
-		switch(c) {
-		case 0:
-			error("error in argument processing\n");
-			exit(1);
-			break;
-		case 'd':
-			opt_debug = true;
-			break;
-		case 'f':
-			opt_force = true;
-			break;
-		case 'v':
-			opt_verbose = true;
-			break;
-		case 'n':
-			opt_dryrun = true;
-			break;
-		case 'h':
-			print_usage(argv[0]);
-			exit(0);
-			break;
-		case 'c':
-			/* TODO: reserved config location,
-			 *  act as a bad arg for now, when added update usage
-			 */
-			//opt_config = true; uncomment when implemented
-			/* Fall through */
-		default:
-			error("unknown argument: '%s'\n\n", optarg);
-			print_usage(argv[1]);
-			exit(1);
-			break;
-		}
-	}
-
-	return optind;
-}
-
-int main(int argc, char **argv)
-{
-	int i, rc = 0;
-
-	optind = process_args(argc, argv);
-
-	if (!opt_dryrun && have_enough_privilege(argv[0]))
-		return 1;
-
-	/* if no location use the default one */
-	if (optind == argc) {
-		if (!opt_config && load_config(DEFAULT_CONFIG_LOCATIONS) == 0) {
-			verbose("Loaded policy config");
-		}
-		if ((rc = load_arg(DEFAULT_POLICY_LOCATIONS)))
-			verbose("Loading policy from default location '%s'", DEFAULT_POLICY_LOCATIONS);
-		else
-			debug("No policy specified, and no policy config or policy in default locations");
-	}
-	for (i = optind; i < argc; i++) {
-		/* Try to load all policy locations even if one fails
-		 * but always return an error if any fail
-		 */
-
-		int tmp = load_arg(argv[i]);
-		if (!rc)
-			rc = tmp;
-	}
-
-	return rc;
-}

binutils/cJSON.h

@@ -1,293 +0,0 @@
-/*
-  Copyright (c) 2009-2017 Dave Gamble and cJSON contributors
-
-  Permission is hereby granted, free of charge, to any person obtaining a copy
-  of this software and associated documentation files (the "Software"), to deal
-  in the Software without restriction, including without limitation the rights
-  to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-  copies of the Software, and to permit persons to whom the Software is
-  furnished to do so, subject to the following conditions:
-
-  The above copyright notice and this permission notice shall be included in
-  all copies or substantial portions of the Software.
-
-  THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-  IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-  FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-  AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-  LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-  OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-  THE SOFTWARE.
-*/
-
-#ifndef cJSON__h
-#define cJSON__h
-
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-
-#if !defined(__WINDOWS__) && (defined(WIN32) || defined(WIN64) || defined(_MSC_VER) || defined(_WIN32))
-#define __WINDOWS__
-#endif
-
-#ifdef __WINDOWS__
-
-/* When compiling for windows, we specify a specific calling convention to avoid issues where we are being called from a project with a different default calling convention.  For windows you have 3 define options:
-
-CJSON_HIDE_SYMBOLS - Define this in the case where you don't want to ever dllexport symbols
-CJSON_EXPORT_SYMBOLS - Define this on library build when you want to dllexport symbols (default)
-CJSON_IMPORT_SYMBOLS - Define this if you want to dllimport symbol
-
-For *nix builds that support visibility attribute, you can define similar behavior by
-
-setting default visibility to hidden by adding
--fvisibility=hidden (for gcc)
-or
--xldscope=hidden (for sun cc)
-to CFLAGS
-
-then using the CJSON_API_VISIBILITY flag to "export" the same symbols the way CJSON_EXPORT_SYMBOLS does
-
-*/
-
-#define CJSON_CDECL __cdecl
-#define CJSON_STDCALL __stdcall
-
-/* export symbols by default, this is necessary for copy pasting the C and header file */
-#if !defined(CJSON_HIDE_SYMBOLS) && !defined(CJSON_IMPORT_SYMBOLS) && !defined(CJSON_EXPORT_SYMBOLS)
-#define CJSON_EXPORT_SYMBOLS
-#endif
-
-#if defined(CJSON_HIDE_SYMBOLS)
-#define CJSON_PUBLIC(type)   type CJSON_STDCALL
-#elif defined(CJSON_EXPORT_SYMBOLS)
-#define CJSON_PUBLIC(type)   __declspec(dllexport) type CJSON_STDCALL
-#elif defined(CJSON_IMPORT_SYMBOLS)
-#define CJSON_PUBLIC(type)   __declspec(dllimport) type CJSON_STDCALL
-#endif
-#else /* !__WINDOWS__ */
-#define CJSON_CDECL
-#define CJSON_STDCALL
-
-#if (defined(__GNUC__) || defined(__SUNPRO_CC) || defined (__SUNPRO_C)) && defined(CJSON_API_VISIBILITY)
-#define CJSON_PUBLIC(type)   __attribute__((visibility("default"))) type
-#else
-#define CJSON_PUBLIC(type) type
-#endif
-#endif
-
-/* project version */
-#define CJSON_VERSION_MAJOR 1
-#define CJSON_VERSION_MINOR 7
-#define CJSON_VERSION_PATCH 13
-
-#include <stddef.h>
-
-/* cJSON Types: */
-#define cJSON_Invalid (0)
-#define cJSON_False  (1 << 0)
-#define cJSON_True   (1 << 1)
-#define cJSON_NULL   (1 << 2)
-#define cJSON_Number (1 << 3)
-#define cJSON_String (1 << 4)
-#define cJSON_Array  (1 << 5)
-#define cJSON_Object (1 << 6)
-#define cJSON_Raw    (1 << 7) /* raw json */
-
-#define cJSON_IsReference 256
-#define cJSON_StringIsConst 512
-
-/* The cJSON structure: */
-typedef struct cJSON
-{
-    /* next/prev allow you to walk array/object chains. Alternatively, use GetArraySize/GetArrayItem/GetObjectItem */
-    struct cJSON *next;
-    struct cJSON *prev;
-    /* An array or object item will have a child pointer pointing to a chain of the items in the array/object. */
-    struct cJSON *child;
-
-    /* The type of the item, as above. */
-    int type;
-
-    /* The item's string, if type==cJSON_String  and type == cJSON_Raw */
-    char *valuestring;
-    /* writing to valueint is DEPRECATED, use cJSON_SetNumberValue instead */
-    int valueint;
-    /* The item's number, if type==cJSON_Number */
-    double valuedouble;
-
-    /* The item's name string, if this item is the child of, or is in the list of subitems of an object. */
-    char *string;
-} cJSON;
-
-typedef struct cJSON_Hooks
-{
-      /* malloc/free are CDECL on Windows regardless of the default calling convention of the compiler, so ensure the hooks allow passing those functions directly. */
-      void *(CJSON_CDECL *malloc_fn)(size_t sz);
-      void (CJSON_CDECL *free_fn)(void *ptr);
-} cJSON_Hooks;
-
-typedef int cJSON_bool;
-
-/* Limits how deeply nested arrays/objects can be before cJSON rejects to parse them.
- * This is to prevent stack overflows. */
-#ifndef CJSON_NESTING_LIMIT
-#define CJSON_NESTING_LIMIT 1000
-#endif
-
-/* returns the version of cJSON as a string */
-CJSON_PUBLIC(const char*) cJSON_Version(void);
-
-/* Supply malloc, realloc and free functions to cJSON */
-CJSON_PUBLIC(void) cJSON_InitHooks(cJSON_Hooks* hooks);
-
-/* Memory Management: the caller is always responsible to free the results from all variants of cJSON_Parse (with cJSON_Delete) and cJSON_Print (with stdlib free, cJSON_Hooks.free_fn, or cJSON_free as appropriate). The exception is cJSON_PrintPreallocated, where the caller has full responsibility of the buffer. */
-/* Supply a block of JSON, and this returns a cJSON object you can interrogate. */
-CJSON_PUBLIC(cJSON *) cJSON_Parse(const char *value);
-CJSON_PUBLIC(cJSON *) cJSON_ParseWithLength(const char *value, size_t buffer_length);
-/* ParseWithOpts allows you to require (and check) that the JSON is null terminated, and to retrieve the pointer to the final byte parsed. */
-/* If you supply a ptr in return_parse_end and parsing fails, then return_parse_end will contain a pointer to the error so will match cJSON_GetErrorPtr(). */
-CJSON_PUBLIC(cJSON *) cJSON_ParseWithOpts(const char *value, const char **return_parse_end, cJSON_bool require_null_terminated);
-CJSON_PUBLIC(cJSON *) cJSON_ParseWithLengthOpts(const char *value, size_t buffer_length, const char **return_parse_end, cJSON_bool require_null_terminated);
-
-/* Render a cJSON entity to text for transfer/storage. */
-CJSON_PUBLIC(char *) cJSON_Print(const cJSON *item);
-/* Render a cJSON entity to text for transfer/storage without any formatting. */
-CJSON_PUBLIC(char *) cJSON_PrintUnformatted(const cJSON *item);
-/* Render a cJSON entity to text using a buffered strategy. prebuffer is a guess at the final size. guessing well reduces reallocation. fmt=0 gives unformatted, =1 gives formatted */
-CJSON_PUBLIC(char *) cJSON_PrintBuffered(const cJSON *item, int prebuffer, cJSON_bool fmt);
-/* Render a cJSON entity to text using a buffer already allocated in memory with given length. Returns 1 on success and 0 on failure. */
-/* NOTE: cJSON is not always 100% accurate in estimating how much memory it will use, so to be safe allocate 5 bytes more than you actually need */
-CJSON_PUBLIC(cJSON_bool) cJSON_PrintPreallocated(cJSON *item, char *buffer, const int length, const cJSON_bool format);
-/* Delete a cJSON entity and all subentities. */
-CJSON_PUBLIC(void) cJSON_Delete(cJSON *item);
-
-/* Returns the number of items in an array (or object). */
-CJSON_PUBLIC(int) cJSON_GetArraySize(const cJSON *array);
-/* Retrieve item number "index" from array "array". Returns NULL if unsuccessful. */
-CJSON_PUBLIC(cJSON *) cJSON_GetArrayItem(const cJSON *array, int index);
-/* Get item "string" from object. Case insensitive. */
-CJSON_PUBLIC(cJSON *) cJSON_GetObjectItem(const cJSON * const object, const char * const string);
-CJSON_PUBLIC(cJSON *) cJSON_GetObjectItemCaseSensitive(const cJSON * const object, const char * const string);
-CJSON_PUBLIC(cJSON_bool) cJSON_HasObjectItem(const cJSON *object, const char *string);
-/* For analysing failed parses. This returns a pointer to the parse error. You'll probably need to look a few chars back to make sense of it. Defined when cJSON_Parse() returns 0. 0 when cJSON_Parse() succeeds. */
-CJSON_PUBLIC(const char *) cJSON_GetErrorPtr(void);
-
-/* Check item type and return its value */
-CJSON_PUBLIC(char *) cJSON_GetStringValue(cJSON *item);
-CJSON_PUBLIC(double) cJSON_GetNumberValue(cJSON *item);
-
-/* These functions check the type of an item */
-CJSON_PUBLIC(cJSON_bool) cJSON_IsInvalid(const cJSON * const item);
-CJSON_PUBLIC(cJSON_bool) cJSON_IsFalse(const cJSON * const item);
-CJSON_PUBLIC(cJSON_bool) cJSON_IsTrue(const cJSON * const item);
-CJSON_PUBLIC(cJSON_bool) cJSON_IsBool(const cJSON * const item);
-CJSON_PUBLIC(cJSON_bool) cJSON_IsNull(const cJSON * const item);
-CJSON_PUBLIC(cJSON_bool) cJSON_IsNumber(const cJSON * const item);
-CJSON_PUBLIC(cJSON_bool) cJSON_IsString(const cJSON * const item);
-CJSON_PUBLIC(cJSON_bool) cJSON_IsArray(const cJSON * const item);
-CJSON_PUBLIC(cJSON_bool) cJSON_IsObject(const cJSON * const item);
-CJSON_PUBLIC(cJSON_bool) cJSON_IsRaw(const cJSON * const item);
-
-/* These calls create a cJSON item of the appropriate type. */
-CJSON_PUBLIC(cJSON *) cJSON_CreateNull(void);
-CJSON_PUBLIC(cJSON *) cJSON_CreateTrue(void);
-CJSON_PUBLIC(cJSON *) cJSON_CreateFalse(void);
-CJSON_PUBLIC(cJSON *) cJSON_CreateBool(cJSON_bool boolean);
-CJSON_PUBLIC(cJSON *) cJSON_CreateNumber(double num);
-CJSON_PUBLIC(cJSON *) cJSON_CreateString(const char *string);
-/* raw json */
-CJSON_PUBLIC(cJSON *) cJSON_CreateRaw(const char *raw);
-CJSON_PUBLIC(cJSON *) cJSON_CreateArray(void);
-CJSON_PUBLIC(cJSON *) cJSON_CreateObject(void);
-
-/* Create a string where valuestring references a string so
- * it will not be freed by cJSON_Delete */
-CJSON_PUBLIC(cJSON *) cJSON_CreateStringReference(const char *string);
-/* Create an object/array that only references it's elements so
- * they will not be freed by cJSON_Delete */
-CJSON_PUBLIC(cJSON *) cJSON_CreateObjectReference(const cJSON *child);
-CJSON_PUBLIC(cJSON *) cJSON_CreateArrayReference(const cJSON *child);
-
-/* These utilities create an Array of count items.
- * The parameter count cannot be greater than the number of elements in the number array, otherwise array access will be out of bounds.*/
-CJSON_PUBLIC(cJSON *) cJSON_CreateIntArray(const int *numbers, int count);
-CJSON_PUBLIC(cJSON *) cJSON_CreateFloatArray(const float *numbers, int count);
-CJSON_PUBLIC(cJSON *) cJSON_CreateDoubleArray(const double *numbers, int count);
-CJSON_PUBLIC(cJSON *) cJSON_CreateStringArray(const char *const *strings, int count);
-
-/* Append item to the specified array/object. */
-CJSON_PUBLIC(cJSON_bool) cJSON_AddItemToArray(cJSON *array, cJSON *item);
-CJSON_PUBLIC(cJSON_bool) cJSON_AddItemToObject(cJSON *object, const char *string, cJSON *item);
-/* Use this when string is definitely const (i.e. a literal, or as good as), and will definitely survive the cJSON object.
- * WARNING: When this function was used, make sure to always check that (item->type & cJSON_StringIsConst) is zero before
- * writing to `item->string` */
-CJSON_PUBLIC(cJSON_bool) cJSON_AddItemToObjectCS(cJSON *object, const char *string, cJSON *item);
-/* Append reference to item to the specified array/object. Use this when you want to add an existing cJSON to a new cJSON, but don't want to corrupt your existing cJSON. */
-CJSON_PUBLIC(cJSON_bool) cJSON_AddItemReferenceToArray(cJSON *array, cJSON *item);
-CJSON_PUBLIC(cJSON_bool) cJSON_AddItemReferenceToObject(cJSON *object, const char *string, cJSON *item);
-
-/* Remove/Detach items from Arrays/Objects. */
-CJSON_PUBLIC(cJSON *) cJSON_DetachItemViaPointer(cJSON *parent, cJSON * const item);
-CJSON_PUBLIC(cJSON *) cJSON_DetachItemFromArray(cJSON *array, int which);
-CJSON_PUBLIC(void) cJSON_DeleteItemFromArray(cJSON *array, int which);
-CJSON_PUBLIC(cJSON *) cJSON_DetachItemFromObject(cJSON *object, const char *string);
-CJSON_PUBLIC(cJSON *) cJSON_DetachItemFromObjectCaseSensitive(cJSON *object, const char *string);
-CJSON_PUBLIC(void) cJSON_DeleteItemFromObject(cJSON *object, const char *string);
-CJSON_PUBLIC(void) cJSON_DeleteItemFromObjectCaseSensitive(cJSON *object, const char *string);
-
-/* Update array items. */
-CJSON_PUBLIC(cJSON_bool) cJSON_InsertItemInArray(cJSON *array, int which, cJSON *newitem); /* Shifts pre-existing items to the right. */
-CJSON_PUBLIC(cJSON_bool) cJSON_ReplaceItemViaPointer(cJSON * const parent, cJSON * const item, cJSON * replacement);
-CJSON_PUBLIC(cJSON_bool) cJSON_ReplaceItemInArray(cJSON *array, int which, cJSON *newitem);
-CJSON_PUBLIC(cJSON_bool) cJSON_ReplaceItemInObject(cJSON *object,const char *string,cJSON *newitem);
-CJSON_PUBLIC(cJSON_bool) cJSON_ReplaceItemInObjectCaseSensitive(cJSON *object,const char *string,cJSON *newitem);
-
-/* Duplicate a cJSON item */
-CJSON_PUBLIC(cJSON *) cJSON_Duplicate(const cJSON *item, cJSON_bool recurse);
-/* Duplicate will create a new, identical cJSON item to the one you pass, in new memory that will
- * need to be released. With recurse!=0, it will duplicate any children connected to the item.
- * The item->next and ->prev pointers are always zero on return from Duplicate. */
-/* Recursively compare two cJSON items for equality. If either a or b is NULL or invalid, they will be considered unequal.
- * case_sensitive determines if object keys are treated case sensitive (1) or case insensitive (0) */
-CJSON_PUBLIC(cJSON_bool) cJSON_Compare(const cJSON * const a, const cJSON * const b, const cJSON_bool case_sensitive);
-
-/* Minify a strings, remove blank characters(such as ' ', '\t', '\r', '\n') from strings.
- * The input pointer json cannot point to a read-only address area, such as a string constant, 
- * but should point to a readable and writable adress area. */
-CJSON_PUBLIC(void) cJSON_Minify(char *json);
-
-/* Helper functions for creating and adding items to an object at the same time.
- * They return the added item or NULL on failure. */
-CJSON_PUBLIC(cJSON*) cJSON_AddNullToObject(cJSON * const object, const char * const name);
-CJSON_PUBLIC(cJSON*) cJSON_AddTrueToObject(cJSON * const object, const char * const name);
-CJSON_PUBLIC(cJSON*) cJSON_AddFalseToObject(cJSON * const object, const char * const name);
-CJSON_PUBLIC(cJSON*) cJSON_AddBoolToObject(cJSON * const object, const char * const name, const cJSON_bool boolean);
-CJSON_PUBLIC(cJSON*) cJSON_AddNumberToObject(cJSON * const object, const char * const name, const double number);
-CJSON_PUBLIC(cJSON*) cJSON_AddStringToObject(cJSON * const object, const char * const name, const char * const string);
-CJSON_PUBLIC(cJSON*) cJSON_AddRawToObject(cJSON * const object, const char * const name, const char * const raw);
-CJSON_PUBLIC(cJSON*) cJSON_AddObjectToObject(cJSON * const object, const char * const name);
-CJSON_PUBLIC(cJSON*) cJSON_AddArrayToObject(cJSON * const object, const char * const name);
-
-/* When assigning an integer value, it needs to be propagated to valuedouble too. */
-#define cJSON_SetIntValue(object, number) ((object) ? (object)->valueint = (object)->valuedouble = (number) : (number))
-/* helper for the cJSON_SetNumberValue macro */
-CJSON_PUBLIC(double) cJSON_SetNumberHelper(cJSON *object, double number);
-#define cJSON_SetNumberValue(object, number) ((object != NULL) ? cJSON_SetNumberHelper(object, (double)number) : (number))
-/* Change the valuestring of a cJSON_String object, only takes effect when type of object is cJSON_String */
-CJSON_PUBLIC(char*) cJSON_SetValuestring(cJSON *object, const char *valuestring);
-
-/* Macro for iterating over an array or object */
-#define cJSON_ArrayForEach(element, array) for(element = (array != NULL) ? (array)->child : NULL; element != NULL; element = element->next)
-
-/* malloc/free objects using the malloc/free functions that have been set with cJSON_InitHooks */
-CJSON_PUBLIC(void *) cJSON_malloc(size_t size);
-CJSON_PUBLIC(void) cJSON_free(void *object);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif

binutils/po/Makefile

@@ -1,19 +0,0 @@
-# ----------------------------------------------------------------------
-#    Copyright (C) 2015 Canonical Ltd.
-#
-#    This program is free software; you can redistribute it and/or
-#    modify it under the terms of version 2 of the GNU General Public
-#    License published by the Free Software Foundation.
-# ----------------------------------------------------------------------
-all:
-
-# As translations get added, they will automatically be included, unless
-# the lang is explicitly added to DISABLED_LANGS; e.g. DISABLED_LANGS=en es
-
-DISABLED_LANGS=
-
-COMMONDIR=../../common
-include $(COMMONDIR)/Make-po.rules
-
-XGETTEXT_ARGS+=--language=C --keyword=_ $(shell if [ -f ${NAME}.pot ] ; then echo -n -j ; fi)
-

binutils/po/aa-enabled.pot

@@ -1,66 +0,0 @@
-# Copyright (C) 2015 Canonical Ltd
-# This file is distributed under the same license as the AppArmor package.
-# John Johansen <john.johansen@canonical.com>, 2015.
-#
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: apparmor@lists.ubuntu.com\n"
-"POT-Creation-Date: 2015-11-28 10:23-0800\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=CHARSET\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../aa_enabled.c:26
-#, c-format
-msgid ""
-"%s: [options]\n"
-"  options:\n"
-"  -q | --quiet        Don't print out any messages\n"
-"  -h | --help         Print help\n"
-msgstr ""
-
-#: ../aa_enabled.c:45
-#, c-format
-msgid "unknown or incompatible options\n"
-msgstr ""
-
-#: ../aa_enabled.c:55
-#, c-format
-msgid "unknown option '%s'\n"
-msgstr ""
-
-#: ../aa_enabled.c:64
-#, c-format
-msgid "Yes\n"
-msgstr ""
-
-#: ../aa_enabled.c:71
-#, c-format
-msgid "No - not available on this system.\n"
-msgstr ""
-
-#: ../aa_enabled.c:74
-#, c-format
-msgid "No - disabled at boot.\n"
-msgstr ""
-
-#: ../aa_enabled.c:77
-#, c-format
-msgid "Maybe - policy interface not available.\n"
-msgstr ""
-
-#: ../aa_enabled.c:81
-#, c-format
-msgid "Maybe - insufficient permissions to determine availability.\n"
-msgstr ""
-
-#: ../aa_enabled.c:84
-#, c-format
-msgid "Error - '%s'\n"
-msgstr ""

binutils/po/aa_enabled.pot

@@ -1,73 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR Canonical Ltd
-# This file is distributed under the same license as the PACKAGE package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
-#
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: apparmor@lists.ubuntu.com\n"
-"POT-Creation-Date: 2020-10-14 03:52-0700\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=CHARSET\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../aa_enabled.c:21
-#, c-format
-msgid ""
-"%s: [options]\n"
-"  options:\n"
-"  -x | --exclusive    Shared interfaces must be available\n"
-"  -q | --quiet        Don't print out any messages\n"
-"  -h | --help         Print help\n"
-msgstr ""
-
-#: ../aa_enabled.c:37
-#, c-format
-msgid "No - not available on this system.\n"
-msgstr ""
-
-#: ../aa_enabled.c:41
-#, c-format
-msgid "No - disabled at boot.\n"
-msgstr ""
-
-#: ../aa_enabled.c:45
-#, c-format
-msgid "Maybe - policy interface not available.\n"
-msgstr ""
-
-#: ../aa_enabled.c:50
-#, c-format
-msgid "Maybe - insufficient permissions to determine availability.\n"
-msgstr ""
-
-#: ../aa_enabled.c:54
-#, c-format
-msgid "Partially - public shared interfaces are not available.\n"
-msgstr ""
-
-#: ../aa_enabled.c:58
-#, c-format
-msgid "Error - %s\n"
-msgstr ""
-
-#: ../aa_enabled.c:73
-#, c-format
-msgid "unknown or incompatible options\n"
-msgstr ""
-
-#: ../aa_enabled.c:87
-#, c-format
-msgid "unknown option '%s'\n"
-msgstr ""
-
-#: ../aa_enabled.c:98
-#, c-format
-msgid "Yes\n"
-msgstr ""

binutils/po/aa_exec.pot

@@ -1,55 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR Canonical Ltd
-# This file is distributed under the same license as the PACKAGE package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
-#
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: apparmor@lists.ubuntu.com\n"
-"POT-Creation-Date: 2020-10-14 03:52-0700\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=CHARSET\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../aa_exec.c:50
-#, c-format
-msgid ""
-"USAGE: %s [OPTIONS] <prog> <args>\n"
-"\n"
-"Confine <prog> with the specified PROFILE.\n"
-"\n"
-"OPTIONS:\n"
-"  -p PROFILE, --profile=PROFILE\t\tPROFILE to confine <prog> with\n"
-"  -n NAMESPACE, --namespace=NAMESPACE\tNAMESPACE to confine <prog> in\n"
-"  -d, --debug\t\t\t\tshow messages with debugging information\n"
-"  -i, --immediate\t\t\tchange profile immediately instead of at exec\n"
-"  -v, --verbose\t\t\t\tshow messages with stats\n"
-"  -h, --help\t\t\t\tdisplay this help\n"
-"\n"
-msgstr ""
-
-#: ../aa_exec.c:65
-#, c-format
-msgid "[%ld] aa-exec: ERROR: "
-msgstr ""
-
-#: ../aa_exec.c:76
-#, c-format
-msgid "[%ld] aa-exec: DEBUG: "
-msgstr ""
-
-#: ../aa_exec.c:89
-#, c-format
-msgid "[%ld] "
-msgstr ""
-
-#: ../aa_exec.c:107
-#, c-format
-msgid "[%ld] exec"
-msgstr ""

binutils/po/aa_features_abi.pot

@@ -1,51 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR Canonical Ltd
-# This file is distributed under the same license as the PACKAGE package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
-#
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: apparmor@lists.ubuntu.com\n"
-"POT-Creation-Date: 2020-10-14 03:52-0700\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=CHARSET\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../aa_features_abi.c:53
-#, c-format
-msgid ""
-"USAGE: %s [OPTIONS] <SOURCE> [OUTPUT OPTIONS]\n"
-"\n"
-"Output AppArmor feature abi from SOURCE to OUTPUT\n"
-"OPTIONS:\n"
-"  -d, --debug      show messages with debugging information\n"
-"  -v, --verbose    show messages with stats\n"
-"  -h, --help       display this help\n"
-"SOURCE:\n"
-"  -f F, --file=F   load features abi from file F\n"
-"  -x, --extract    extract features abi from the kernel\n"
-"OUTPUT OPTIONS:\n"
-"  --stdout         default, write features to stdout\n"
-"  -w F, --write=F  write features abi to the file F instead of stdout\n"
-"\n"
-msgstr ""
-
-#: ../aa_features_abi.c:73
-#, c-format
-msgid "%s: ERROR: "
-msgstr ""
-
-#: ../aa_features_abi.c:85
-#, c-format
-msgid "%s: DEBUG: "
-msgstr ""
-
-#: ../aa_features_abi.c:98
-msgid "\n"
-msgstr ""

binutils/po/af.po

@@ -1,71 +0,0 @@
-# Afrikaans translation for apparmor
-# Copyright (c) 2020 Rosetta Contributors and Canonical Ltd 2020
-# This file is distributed under the same license as the apparmor package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, 2020.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: apparmor\n"
-"Report-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>\n"
-"POT-Creation-Date: 2015-11-28 10:23-0800\n"
-"PO-Revision-Date: 2020-03-04 17:55+0000\n"
-"Last-Translator: bernard stafford <Unknown>\n"
-"Language-Team: Afrikaans <af@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Launchpad-Export-Date: 2020-03-05 05:40+0000\n"
-"X-Generator: Launchpad (build e0878392dc799b267dea80578fa65500a5d74155)\n"
-
-#: ../aa_enabled.c:26
-#, c-format
-msgid ""
-"%s: [options]\n"
-"  options:\n"
-"  -q | --quiet        Don't print out any messages\n"
-"  -h | --help         Print help\n"
-msgstr ""
-"%s: [opsies]\n"
-"  opsies:\n"
-"  -q | --quiet Moenie druk uit enige boodskappe\n"
-"  -h | --help Afdruk hulp\n"
-
-#: ../aa_enabled.c:45
-#, c-format
-msgid "unknown or incompatible options\n"
-msgstr "onbekende of onversoenbare opsies\n"
-
-#: ../aa_enabled.c:55
-#, c-format
-msgid "unknown option '%s'\n"
-msgstr "onbekende opsie '%s'\n"
-
-#: ../aa_enabled.c:64
-#, c-format
-msgid "Yes\n"
-msgstr "Ja\n"
-
-#: ../aa_enabled.c:71
-#, c-format
-msgid "No - not available on this system.\n"
-msgstr "Geen - nie beskikbaar op hierdie stelsel.\n"
-
-#: ../aa_enabled.c:74
-#, c-format
-msgid "No - disabled at boot.\n"
-msgstr "Nee - gestremde by stewel.\n"
-
-#: ../aa_enabled.c:77
-#, c-format
-msgid "Maybe - policy interface not available.\n"
-msgstr "Miskien - beleid koppelvlak nie beskikbaar.\n"
-
-#: ../aa_enabled.c:81
-#, c-format
-msgid "Maybe - insufficient permissions to determine availability.\n"
-msgstr "Miskien - onvoldoende toestemmings om beskikbaarheid te bepaal.\n"
-
-#: ../aa_enabled.c:84
-#, c-format
-msgid "Error - '%s'\n"
-msgstr "Fout - '%s'\n"

binutils/po/de.po

@@ -1,73 +0,0 @@
-# German translation for apparmor
-# Copyright (c) 2016 Rosetta Contributors and Canonical Ltd 2016
-# This file is distributed under the same license as the apparmor package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, 2016.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: apparmor\n"
-"Report-Msgid-Bugs-To: AppArmor list <apparmor@lists.ubuntu.com>\n"
-"POT-Creation-Date: 2015-11-28 10:23-0800\n"
-"PO-Revision-Date: 2018-02-09 23:55+0000\n"
-"Last-Translator: Tobias Bannert <tobannert@gmail.com>\n"
-"Language-Team: German <de@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Launchpad-Export-Date: 2019-04-18 05:33+0000\n"
-"X-Generator: Launchpad (build 18928)\n"
-"Language: de\n"
-
-#: ../aa_enabled.c:26
-#, c-format
-msgid ""
-"%s: [options]\n"
-"  options:\n"
-"  -q | --quiet        Don't print out any messages\n"
-"  -h | --help         Print help\n"
-msgstr ""
-"%s: [Optionen]\n"
-"  Optionen:\n"
-"  -q | --quiet        Keine Nachrichten anzeigen\n"
-"  -h | --help         Hilfetext anzeigen\n"
-
-#: ../aa_enabled.c:45
-#, c-format
-msgid "unknown or incompatible options\n"
-msgstr "unbekannte oder nicht kompatible Optionen\n"
-
-#: ../aa_enabled.c:55
-#, c-format
-msgid "unknown option '%s'\n"
-msgstr "unbekannte Option »%s«\n"
-
-#: ../aa_enabled.c:64
-#, c-format
-msgid "Yes\n"
-msgstr "Ja\n"
-
-#: ../aa_enabled.c:71
-#, c-format
-msgid "No - not available on this system.\n"
-msgstr "Nein – auf diesem System nicht verfügbar.\n"
-
-#: ../aa_enabled.c:74
-#, c-format
-msgid "No - disabled at boot.\n"
-msgstr "Nein – beim Start deaktiviert.\n"
-
-#: ../aa_enabled.c:77
-#, c-format
-msgid "Maybe - policy interface not available.\n"
-msgstr "Vielleicht – Richtlinienschnittstelle nicht verfügbar.\n"
-
-#: ../aa_enabled.c:81
-#, c-format
-msgid "Maybe - insufficient permissions to determine availability.\n"
-msgstr ""
-"Vielleicht – ungenügende Berechtigungen, um die Verfügbarkeit zu prüfen\n"
-
-#: ../aa_enabled.c:84
-#, c-format
-msgid "Error - '%s'\n"
-msgstr "Fehler – »%s«\n"

binutils/po/en_GB.po

@@ -1,72 +0,0 @@
-# English (United Kingdom) translation for apparmor
-# Copyright (c) 2016 Rosetta Contributors and Canonical Ltd 2016
-# This file is distributed under the same license as the apparmor package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, 2016.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: apparmor\n"
-"Report-Msgid-Bugs-To: AppArmor list <apparmor@lists.ubuntu.com>\n"
-"POT-Creation-Date: 2015-11-28 10:23-0800\n"
-"PO-Revision-Date: 2016-02-18 06:22+0000\n"
-"Last-Translator: Andi Chandler <Unknown>\n"
-"Language-Team: English (United Kingdom) <en_GB@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Launchpad-Export-Date: 2019-04-18 05:33+0000\n"
-"X-Generator: Launchpad (build 18928)\n"
-"Language: en_GB\n"
-
-#: ../aa_enabled.c:26
-#, c-format
-msgid ""
-"%s: [options]\n"
-"  options:\n"
-"  -q | --quiet        Don't print out any messages\n"
-"  -h | --help         Print help\n"
-msgstr ""
-"%s: [options]\n"
-"  options:\n"
-"  -q | --quiet        Don't print out any messages\n"
-"  -h | --help         Print help\n"
-
-#: ../aa_enabled.c:45
-#, c-format
-msgid "unknown or incompatible options\n"
-msgstr "unknown or incompatible options\n"
-
-#: ../aa_enabled.c:55
-#, c-format
-msgid "unknown option '%s'\n"
-msgstr "unknown option '%s'\n"
-
-#: ../aa_enabled.c:64
-#, c-format
-msgid "Yes\n"
-msgstr "Yes\n"
-
-#: ../aa_enabled.c:71
-#, c-format
-msgid "No - not available on this system.\n"
-msgstr "No - not available on this system.\n"
-
-#: ../aa_enabled.c:74
-#, c-format
-msgid "No - disabled at boot.\n"
-msgstr "No - disabled at boot.\n"
-
-#: ../aa_enabled.c:77
-#, c-format
-msgid "Maybe - policy interface not available.\n"
-msgstr "Maybe - policy interface not available.\n"
-
-#: ../aa_enabled.c:81
-#, c-format
-msgid "Maybe - insufficient permissions to determine availability.\n"
-msgstr "Maybe - insufficient permissions to determine availability.\n"
-
-#: ../aa_enabled.c:84
-#, c-format
-msgid "Error - '%s'\n"
-msgstr "Error - '%s'\n"

binutils/po/es.po

@@ -1,71 +0,0 @@
-# Spanish translation for apparmor
-# Copyright (c) 2019 Rosetta Contributors and Canonical Ltd 2019
-# This file is distributed under the same license as the apparmor package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, 2019.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: apparmor\n"
-"Report-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>\n"
-"POT-Creation-Date: 2015-11-28 10:23-0800\n"
-"PO-Revision-Date: 2019-06-09 14:01+0000\n"
-"Last-Translator: Adolfo Jayme <fitoschido@gmail.com>\n"
-"Language-Team: Spanish <es@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Launchpad-Export-Date: 2019-06-10 04:32+0000\n"
-"X-Generator: Launchpad (build 18978)\n"
-
-#: ../aa_enabled.c:26
-#, c-format
-msgid ""
-"%s: [options]\n"
-"  options:\n"
-"  -q | --quiet        Don't print out any messages\n"
-"  -h | --help         Print help\n"
-msgstr ""
-"%s: [opciones]\n"
-"  opciones:\n"
-"  -q | --quiet        No emitir ningún mensaje\n"
-"  -h | --help         Mostrar la ayuda\n"
-
-#: ../aa_enabled.c:45
-#, c-format
-msgid "unknown or incompatible options\n"
-msgstr "opciones desconocidas o incompatibles\n"
-
-#: ../aa_enabled.c:55
-#, c-format
-msgid "unknown option '%s'\n"
-msgstr "se desconoce la opción «%s»\n"
-
-#: ../aa_enabled.c:64
-#, c-format
-msgid "Yes\n"
-msgstr "Sí\n"
-
-#: ../aa_enabled.c:71
-#, c-format
-msgid "No - not available on this system.\n"
-msgstr "No; no disponible en este sistema.\n"
-
-#: ../aa_enabled.c:74
-#, c-format
-msgid "No - disabled at boot.\n"
-msgstr "No; desactivado durante el arranque.\n"
-
-#: ../aa_enabled.c:77
-#, c-format
-msgid "Maybe - policy interface not available.\n"
-msgstr "Quizá; interfaz de directiva no disponible.\n"
-
-#: ../aa_enabled.c:81
-#, c-format
-msgid "Maybe - insufficient permissions to determine availability.\n"
-msgstr "Quizá; permisos insuficientes para determinar disponibilidad.\n"
-
-#: ../aa_enabled.c:84
-#, c-format
-msgid "Error - '%s'\n"
-msgstr "Error: «%s»\n"

binutils/po/fa.po

@@ -1,67 +0,0 @@
-# Persian translation for apparmor
-# Copyright (c) 2019 Rosetta Contributors and Canonical Ltd 2019
-# This file is distributed under the same license as the apparmor package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, 2019.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: apparmor\n"
-"Report-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>\n"
-"POT-Creation-Date: 2015-11-28 10:23-0800\n"
-"PO-Revision-Date: 2019-12-27 08:16+0000\n"
-"Last-Translator: VahidNameni <Unknown>\n"
-"Language-Team: Persian <fa@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Launchpad-Export-Date: 2019-12-28 05:38+0000\n"
-"X-Generator: Launchpad (build bceb5ef013b87ef7aafe0755545ceb689ca7ac60)\n"
-
-#: ../aa_enabled.c:26
-#, c-format
-msgid ""
-"%s: [options]\n"
-"  options:\n"
-"  -q | --quiet        Don't print out any messages\n"
-"  -h | --help         Print help\n"
-msgstr ""
-
-#: ../aa_enabled.c:45
-#, c-format
-msgid "unknown or incompatible options\n"
-msgstr "تنظیم نامعلوم یا ناسازگار\n"
-
-#: ../aa_enabled.c:55
-#, c-format
-msgid "unknown option '%s'\n"
-msgstr "تنظیم  '%s' ناشناخته است\n"
-
-#: ../aa_enabled.c:64
-#, c-format
-msgid "Yes\n"
-msgstr "بله\n"
-
-#: ../aa_enabled.c:71
-#, c-format
-msgid "No - not available on this system.\n"
-msgstr "خیر- در این سیستم موجود نیست.\n"
-
-#: ../aa_enabled.c:74
-#, c-format
-msgid "No - disabled at boot.\n"
-msgstr "خیر - غیرفعال در زمان boot.\n"
-
-#: ../aa_enabled.c:77
-#, c-format
-msgid "Maybe - policy interface not available.\n"
-msgstr "شاید - رابط سیاست گذاری در دسترس نیست.\n"
-
-#: ../aa_enabled.c:81
-#, c-format
-msgid "Maybe - insufficient permissions to determine availability.\n"
-msgstr "شاید - دسترسی ناکافی جهت شناسایی در دسترس پذیری.\n"
-
-#: ../aa_enabled.c:84
-#, c-format
-msgid "Error - '%s'\n"
-msgstr "خطا - '%s'\n"

binutils/po/fi.po

@@ -1,67 +0,0 @@
-# Finnish translation for apparmor
-# Copyright (c) 2020 Rosetta Contributors and Canonical Ltd 2020
-# This file is distributed under the same license as the apparmor package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, 2020.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: apparmor\n"
-"Report-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>\n"
-"POT-Creation-Date: 2015-11-28 10:23-0800\n"
-"PO-Revision-Date: 2020-01-29 07:44+0000\n"
-"Last-Translator: Jiri Grönroos <Unknown>\n"
-"Language-Team: Finnish <fi@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Launchpad-Export-Date: 2020-01-30 05:40+0000\n"
-"X-Generator: Launchpad (build b8d1327fd820d6bf500589d6da587d5037c7d88e)\n"
-
-#: ../aa_enabled.c:26
-#, c-format
-msgid ""
-"%s: [options]\n"
-"  options:\n"
-"  -q | --quiet        Don't print out any messages\n"
-"  -h | --help         Print help\n"
-msgstr ""
-
-#: ../aa_enabled.c:45
-#, c-format
-msgid "unknown or incompatible options\n"
-msgstr "tuntemattomat tai yhteensopimattomat valinnat\n"
-
-#: ../aa_enabled.c:55
-#, c-format
-msgid "unknown option '%s'\n"
-msgstr "tuntematon valinta '%s'\n"
-
-#: ../aa_enabled.c:64
-#, c-format
-msgid "Yes\n"
-msgstr "Kyllä\n"
-
-#: ../aa_enabled.c:71
-#, c-format
-msgid "No - not available on this system.\n"
-msgstr "Ei - ei käytettävissä tässä järjestelmässä.\n"
-
-#: ../aa_enabled.c:74
-#, c-format
-msgid "No - disabled at boot.\n"
-msgstr "Ei - poistettu käytöstä käynnistyksen yhteydessä.\n"
-
-#: ../aa_enabled.c:77
-#, c-format
-msgid "Maybe - policy interface not available.\n"
-msgstr ""
-
-#: ../aa_enabled.c:81
-#, c-format
-msgid "Maybe - insufficient permissions to determine availability.\n"
-msgstr ""
-
-#: ../aa_enabled.c:84
-#, c-format
-msgid "Error - '%s'\n"
-msgstr "Virhe - '%s'\n"

binutils/po/id.po

@@ -1,72 +0,0 @@
-# Indonesian translation for apparmor
-# Copyright (c) 2016 Rosetta Contributors and Canonical Ltd 2016
-# This file is distributed under the same license as the apparmor package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, 2016.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: apparmor\n"
-"Report-Msgid-Bugs-To: AppArmor list <apparmor@lists.ubuntu.com>\n"
-"POT-Creation-Date: 2015-11-28 10:23-0800\n"
-"PO-Revision-Date: 2016-01-20 08:59+0000\n"
-"Last-Translator: Ari Setyo Wibowo <mr.a.contact@gmail.com>\n"
-"Language-Team: Indonesian <id@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Launchpad-Export-Date: 2019-04-18 05:33+0000\n"
-"X-Generator: Launchpad (build 18928)\n"
-"Language: id\n"
-
-#: ../aa_enabled.c:26
-#, c-format
-msgid ""
-"%s: [options]\n"
-"  options:\n"
-"  -q | --quiet        Don't print out any messages\n"
-"  -h | --help         Print help\n"
-msgstr ""
-"%s: [options]\n"
-"  pilihan:\n"
-"  -q | --quiet       Jangan tampilkan pesan apapun\n"
-"  -h | --help         Tampilkan bantuan\n"
-
-#: ../aa_enabled.c:45
-#, c-format
-msgid "unknown or incompatible options\n"
-msgstr "pilihan yang tidak dikenali atau tidak kompatibel\n"
-
-#: ../aa_enabled.c:55
-#, c-format
-msgid "unknown option '%s'\n"
-msgstr "pilihan tidak dikenali '%s'\n"
-
-#: ../aa_enabled.c:64
-#, c-format
-msgid "Yes\n"
-msgstr "Ya\n"
-
-#: ../aa_enabled.c:71
-#, c-format
-msgid "No - not available on this system.\n"
-msgstr "Tidak - tidak tersedia di sistem ini.\n"
-
-#: ../aa_enabled.c:74
-#, c-format
-msgid "No - disabled at boot.\n"
-msgstr "Tidak - nonaktifkan saat boot.\n"
-
-#: ../aa_enabled.c:77
-#, c-format
-msgid "Maybe - policy interface not available.\n"
-msgstr "Mungkin - kebijakan antarmuka tidak tersedia.\n"
-
-#: ../aa_enabled.c:81
-#, c-format
-msgid "Maybe - insufficient permissions to determine availability.\n"
-msgstr "Mungkin - izin tidak memadai untuk menentukan ketersediaan.\n"
-
-#: ../aa_enabled.c:84
-#, c-format
-msgid "Error - '%s'\n"
-msgstr "Kesalahan - '%s'\n"

binutils/po/pt.po

@@ -1,72 +0,0 @@
-# Portuguese translation for apparmor
-# Copyright (c) 2016 Rosetta Contributors and Canonical Ltd 2016
-# This file is distributed under the same license as the apparmor package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, 2016.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: apparmor\n"
-"Report-Msgid-Bugs-To: AppArmor list <apparmor@lists.ubuntu.com>\n"
-"POT-Creation-Date: 2015-11-28 10:23-0800\n"
-"PO-Revision-Date: 2016-03-03 08:34+0000\n"
-"Last-Translator: Ivo Xavier <ivofernandes12@gmail.com>\n"
-"Language-Team: Portuguese <pt@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Launchpad-Export-Date: 2019-04-18 05:33+0000\n"
-"X-Generator: Launchpad (build 18928)\n"
-"Language: pt\n"
-
-#: ../aa_enabled.c:26
-#, c-format
-msgid ""
-"%s: [options]\n"
-"  options:\n"
-"  -q | --quiet        Don't print out any messages\n"
-"  -h | --help         Print help\n"
-msgstr ""
-"%s: [opções]\n"
-"  opções:\n"
-"  -q | --silencioso        Não mostrar mensagens\n"
-"  -h | --ajuda         Mostar ajuda\n"
-
-#: ../aa_enabled.c:45
-#, c-format
-msgid "unknown or incompatible options\n"
-msgstr "opções desconhecidas ou incompatíveis\n"
-
-#: ../aa_enabled.c:55
-#, c-format
-msgid "unknown option '%s'\n"
-msgstr "opção desconhecida '%s'\n"
-
-#: ../aa_enabled.c:64
-#, c-format
-msgid "Yes\n"
-msgstr "Sim\n"
-
-#: ../aa_enabled.c:71
-#, c-format
-msgid "No - not available on this system.\n"
-msgstr "Não - não disponível neste sistema.\n"
-
-#: ../aa_enabled.c:74
-#, c-format
-msgid "No - disabled at boot.\n"
-msgstr "Não - desligado ao iniciar.\n"
-
-#: ../aa_enabled.c:77
-#, c-format
-msgid "Maybe - policy interface not available.\n"
-msgstr "Talvez - política de interface não disponível.\n"
-
-#: ../aa_enabled.c:81
-#, c-format
-msgid "Maybe - insufficient permissions to determine availability.\n"
-msgstr "Talvez - permissões insuficientes para determinar disponibilidade.\n"
-
-#: ../aa_enabled.c:84
-#, c-format
-msgid "Error - '%s'\n"
-msgstr "Erro - '%s'\n"

binutils/po/ro.po

@@ -1,72 +0,0 @@
-# Romanian translation for apparmor
-# Copyright (c) 2020 Rosetta Contributors and Canonical Ltd 2020
-# This file is distributed under the same license as the apparmor package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, 2020.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: apparmor\n"
-"Report-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>\n"
-"POT-Creation-Date: 2015-11-28 10:23-0800\n"
-"PO-Revision-Date: 2020-02-20 21:47+0000\n"
-"Last-Translator: Daniel Slavu <Unknown>\n"
-"Language-Team: Romanian <ro@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Launchpad-Export-Date: 2020-02-21 05:39+0000\n"
-"X-Generator: Launchpad (build 19413b719a8df7423ab1390528edadce9e0e4aca)\n"
-
-#: ../aa_enabled.c:26
-#, c-format
-msgid ""
-"%s: [options]\n"
-"  options:\n"
-"  -q | --quiet        Don't print out any messages\n"
-"  -h | --help         Print help\n"
-msgstr ""
-"%s: [opțiuni]\n"
-"  opțiuni:\n"
-"  -q | --calm Nu imprima niciun mesaj\n"
-"  -h | - ajutor Imprimare ajutor\n"
-
-#: ../aa_enabled.c:45
-#, c-format
-msgid "unknown or incompatible options\n"
-msgstr "opțiuni necunoscute sau incompatibile\n"
-
-#: ../aa_enabled.c:55
-#, c-format
-msgid "unknown option '%s'\n"
-msgstr "opțiune necunoscută '%s'\n"
-
-#: ../aa_enabled.c:64
-#, c-format
-msgid "Yes\n"
-msgstr "Da\n"
-
-#: ../aa_enabled.c:71
-#, c-format
-msgid "No - not available on this system.\n"
-msgstr "Nu - nu este disponibil pe acest sistem.\n"
-
-#: ../aa_enabled.c:74
-#, c-format
-msgid "No - disabled at boot.\n"
-msgstr "Nu - dezactivat la pornire.\n"
-
-#: ../aa_enabled.c:77
-#, c-format
-msgid "Maybe - policy interface not available.\n"
-msgstr "Poate - interfața politică nu este disponibilă.\n"
-
-#: ../aa_enabled.c:81
-#, c-format
-msgid "Maybe - insufficient permissions to determine availability.\n"
-msgstr ""
-"Poate - permisiuni insuficiente pentru a determina disponibilitatea.\n"
-
-#: ../aa_enabled.c:84
-#, c-format
-msgid "Error - '%s'\n"
-msgstr "Eroare - '%s'\n"

binutils/po/ru.po

@@ -1,72 +0,0 @@
-# Russian translation for apparmor
-# Copyright (c) 2016 Rosetta Contributors and Canonical Ltd 2016
-# This file is distributed under the same license as the apparmor package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, 2016.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: apparmor\n"
-"Report-Msgid-Bugs-To: AppArmor list <apparmor@lists.ubuntu.com>\n"
-"POT-Creation-Date: 2015-11-28 10:23-0800\n"
-"PO-Revision-Date: 2016-03-29 14:46+0000\n"
-"Last-Translator: Eugene Roskin <Unknown>\n"
-"Language-Team: Russian <ru@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Launchpad-Export-Date: 2019-04-18 05:33+0000\n"
-"X-Generator: Launchpad (build 18928)\n"
-"Language: ru\n"
-
-#: ../aa_enabled.c:26
-#, c-format
-msgid ""
-"%s: [options]\n"
-"  options:\n"
-"  -q | --quiet        Don't print out any messages\n"
-"  -h | --help         Print help\n"
-msgstr ""
-"%s: [параметры]\n"
-"  параметры:\n"
-"  -q | --quiet        не выводить никакие сообщения\n"
-"  -h | --help          вывести справку\n"
-
-#: ../aa_enabled.c:45
-#, c-format
-msgid "unknown or incompatible options\n"
-msgstr "неизвестные или несовместимые параметры\n"
-
-#: ../aa_enabled.c:55
-#, c-format
-msgid "unknown option '%s'\n"
-msgstr "неизвестный параметр '%s'\n"
-
-#: ../aa_enabled.c:64
-#, c-format
-msgid "Yes\n"
-msgstr "Да\n"
-
-#: ../aa_enabled.c:71
-#, c-format
-msgid "No - not available on this system.\n"
-msgstr "Нет - недоступно на этой системе.\n"
-
-#: ../aa_enabled.c:74
-#, c-format
-msgid "No - disabled at boot.\n"
-msgstr "Нет - выключено при загрузке.\n"
-
-#: ../aa_enabled.c:77
-#, c-format
-msgid "Maybe - policy interface not available.\n"
-msgstr "Возможно - интерфейс политики недоступен.\n"
-
-#: ../aa_enabled.c:81
-#, c-format
-msgid "Maybe - insufficient permissions to determine availability.\n"
-msgstr "Возможно - недостаточно разрешений для определения доступности.\n"
-
-#: ../aa_enabled.c:84
-#, c-format
-msgid "Error - '%s'\n"
-msgstr "Ошибка - '%s'\n"

binutils/po/sv.po

@@ -1,72 +0,0 @@
-# Swedish translation for apparmor
-# Copyright (c) 2018 Rosetta Contributors and Canonical Ltd 2018
-# This file is distributed under the same license as the apparmor package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, 2018.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: apparmor\n"
-"Report-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>\n"
-"POT-Creation-Date: 2015-11-28 10:23-0800\n"
-"PO-Revision-Date: 2018-09-08 03:51+0000\n"
-"Last-Translator: Jonatan Nyberg <Unknown>\n"
-"Language-Team: Swedish <sv@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Launchpad-Export-Date: 2019-04-18 05:33+0000\n"
-"X-Generator: Launchpad (build 18928)\n"
-
-#: ../aa_enabled.c:26
-#, c-format
-msgid ""
-"%s: [options]\n"
-"  options:\n"
-"  -q | --quiet        Don't print out any messages\n"
-"  -h | --help         Print help\n"
-msgstr ""
-"%s: [options]\n"
-"  flaggor:\n"
-"  -q | --quiet        Skriv inte ut några meddelanden\n"
-"  -h | --help         Skriv ut hjälp\n"
-
-#: ../aa_enabled.c:45
-#, c-format
-msgid "unknown or incompatible options\n"
-msgstr "okända eller inkompatibla flaggor\n"
-
-#: ../aa_enabled.c:55
-#, c-format
-msgid "unknown option '%s'\n"
-msgstr "okänd flagga '%s'\n"
-
-#: ../aa_enabled.c:64
-#, c-format
-msgid "Yes\n"
-msgstr "Ja\n"
-
-#: ../aa_enabled.c:71
-#, c-format
-msgid "No - not available on this system.\n"
-msgstr "Nej - inte tillgänglig på detta system.\n"
-
-#: ../aa_enabled.c:74
-#, c-format
-msgid "No - disabled at boot.\n"
-msgstr "Nej - inaktiverad vid uppstart.\n"
-
-#: ../aa_enabled.c:77
-#, c-format
-msgid "Maybe - policy interface not available.\n"
-msgstr "Kanske - policy gränssnitt inte tillgängliga.\n"
-
-#: ../aa_enabled.c:81
-#, c-format
-msgid "Maybe - insufficient permissions to determine availability.\n"
-msgstr ""
-"Kanske - otillräckliga behörigheter för att bestämma tillgängligheten.\n"
-
-#: ../aa_enabled.c:84
-#, c-format
-msgid "Error - '%s'\n"
-msgstr "Fel - '%s'\n"

binutils/po/sw.po

@@ -1,71 +0,0 @@
-# Swahili translation for apparmor
-# Copyright (c) 2019 Rosetta Contributors and Canonical Ltd 2019
-# This file is distributed under the same license as the apparmor package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, 2019.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: apparmor\n"
-"Report-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>\n"
-"POT-Creation-Date: 2015-11-28 10:23-0800\n"
-"PO-Revision-Date: 2019-11-14 12:33+0000\n"
-"Last-Translator: Swahilinux Administration <admin@swahilinux.org>\n"
-"Language-Team: Swahili <sw@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Launchpad-Export-Date: 2019-11-15 04:30+0000\n"
-"X-Generator: Launchpad (build c597c3229eb023b1e626162d5947141bf7befb13)\n"
-
-#: ../aa_enabled.c:26
-#, c-format
-msgid ""
-"%s: [options]\n"
-"  options:\n"
-"  -q | --quiet        Don't print out any messages\n"
-"  -h | --help         Print help\n"
-msgstr ""
-"%s: [chaguzi]\n"
-"  chaguzi:\n"
-"  -q | --quiet Usichapishe jumbe yoyote\n"
-"  -h | --help Chapisha msaada\n"
-
-#: ../aa_enabled.c:45
-#, c-format
-msgid "unknown or incompatible options\n"
-msgstr "chaguo lisilojulikana au lisilofaa\n"
-
-#: ../aa_enabled.c:55
-#, c-format
-msgid "unknown option '%s'\n"
-msgstr "chaguo lisilojulikana '%s'\n"
-
-#: ../aa_enabled.c:64
-#, c-format
-msgid "Yes\n"
-msgstr "Ndio\n"
-
-#: ../aa_enabled.c:71
-#, c-format
-msgid "No - not available on this system.\n"
-msgstr "La - haipo kwenye mfumo huu.\n"
-
-#: ../aa_enabled.c:74
-#, c-format
-msgid "No - disabled at boot.\n"
-msgstr "La - ilizimwa kwenye washi.\n"
-
-#: ../aa_enabled.c:77
-#, c-format
-msgid "Maybe - policy interface not available.\n"
-msgstr "Labda - kiolesura cha faragha hakipo.\n"
-
-#: ../aa_enabled.c:81
-#, c-format
-msgid "Maybe - insufficient permissions to determine availability.\n"
-msgstr "Labda - hamna ruhusa ya kutosha ili kuamua kama ipo.\n"
-
-#: ../aa_enabled.c:84
-#, c-format
-msgid "Error - '%s'\n"
-msgstr "Dosari - '%s'\n"

binutils/po/tr.po

@@ -1,72 +0,0 @@
-# Turkish translation for apparmor
-# Copyright (c) 2018 Rosetta Contributors and Canonical Ltd 2018
-# This file is distributed under the same license as the apparmor package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, 2018.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: apparmor\n"
-"Report-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>\n"
-"POT-Creation-Date: 2015-11-28 10:23-0800\n"
-"PO-Revision-Date: 2018-05-19 23:10+0000\n"
-"Last-Translator: Kudret EMRE <kudretemre@hotmail.com>\n"
-"Language-Team: Turkish <tr@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Launchpad-Export-Date: 2019-04-18 05:33+0000\n"
-"X-Generator: Launchpad (build 18928)\n"
-
-#: ../aa_enabled.c:26
-#, c-format
-msgid ""
-"%s: [options]\n"
-"  options:\n"
-"  -q | --quiet        Don't print out any messages\n"
-"  -h | --help         Print help\n"
-msgstr ""
-"%s: [seçenekler]\n"
-"  seçenekler:\n"
-"  -q | --quiet        Hiçbir mesajı gösterme\n"
-"  -h | --help         Yardımı görüntüler\n"
-
-#: ../aa_enabled.c:45
-#, c-format
-msgid "unknown or incompatible options\n"
-msgstr "bilinmeyen veya uyumsuz seçenekler\n"
-
-#: ../aa_enabled.c:55
-#, c-format
-msgid "unknown option '%s'\n"
-msgstr "bilinmeyen seçenek '%s'\n"
-
-#: ../aa_enabled.c:64
-#, c-format
-msgid "Yes\n"
-msgstr "Evet\n"
-
-#: ../aa_enabled.c:71
-#, c-format
-msgid "No - not available on this system.\n"
-msgstr "Hayır - Bu sistemde kullanılabilir değil.\n"
-
-#: ../aa_enabled.c:74
-#, c-format
-msgid "No - disabled at boot.\n"
-msgstr "Hayır - önyüklemede devredışı bırakıldı.\n"
-
-#: ../aa_enabled.c:77
-#, c-format
-msgid "Maybe - policy interface not available.\n"
-msgstr "Belki - policy arayüzü kullanılabilir değil.\n"
-
-#: ../aa_enabled.c:81
-#, c-format
-msgid "Maybe - insufficient permissions to determine availability.\n"
-msgstr ""
-"Belki - kullanılabilir olup olmadığını denetlemek için yetersiz yetki.\n"
-
-#: ../aa_enabled.c:84
-#, c-format
-msgid "Error - '%s'\n"
-msgstr "Hata - '%s'\n"

changehat/mod_apparmor/Makefile

@@ -1,6 +1,5 @@
 # ----------------------------------------------------------------------
 #    Copyright (c) 2004, 2005 NOVELL (All rights reserved)
-#    Copyright (c) 2016 Canonical, Ltd.
 #
 #    This program is free software; you can redistribute it and/or
 #    modify it under the terms of version 2 of the GNU General Public
@@ -18,7 +17,13 @@ NAME:=apache2-mod_apparmor
 all:
 COMMONDIR=../../common/
 
-include $(COMMONDIR)/Make.rules
+include common/Make.rules
+
+COMMONDIR_EXISTS=$(strip $(shell [ -d ${COMMONDIR} ] && echo true))
+ifeq ($(COMMONDIR_EXISTS), true)
+common/Make.rules: $(COMMONDIR)/Make.rules
+	ln -sf $(COMMONDIR) .
+endif
 
 TARGET:=mod_apparmor.so
 MANPAGES=mod_apparmor.8
@@ -36,65 +41,24 @@ APXS:=$(shell if [ -x "/usr/sbin/apxs2" ] ; then \
 	      fi ) 
 APXS_INSTALL_DIR=$(shell ${APXS} -q LIBEXECDIR)
 DESTDIR=
-ifdef USE_SYSTEM
-  LIBAPPARMOR = $(shell if pkg-config --exists libapparmor ; then \
-                                pkg-config --silence-errors --libs libapparmor ; \
-                        elif ldconfig -p | grep -q libapparmor\.so$$ ; then \
-                                echo -lapparmor ; \
-                        fi )
-  ifeq ($(strip $(LIBAPPARMOR)),)
-    ERROR_MESSAGE = $(error ${nl}\
-************************************************************************${nl}\
-Unable to find libapparmor installed on this system; either${nl}\
-install libapparmor devel packages, set the LIBAPPARMOR variable${nl}\
-manually, or build against in-tree libapparmor.${nl}\
-************************************************************************${nl})
-  endif # LIBAPPARMOR not set
-  LDLIBS += $(LIBAPPARMOR)
-else
-  LIBAPPARMOR_SRC := ../../libraries/libapparmor/
-  LIBAPPARMOR_INCLUDE = $(LIBAPPARMOR_SRC)/include
-  LIBAPPARMOR_PATH := $(LIBAPPARMOR_SRC)/src/.libs/
-    ifeq ($(realpath $(LIBAPPARMOR_PATH)/libapparmor.a),)
-        ERROR_MESSAGE = $(error ${nl}\
-************************************************************************${nl}\
-$(LIBAPPARMOR_PATH)/libapparmor.a is missing; either build against${nl}\
-the in-tree libapparmor by building it first and then trying again${nl}\
-(see the top-level README for help) or build against the system${nl}\
-libapparmor by adding USE_SYSTEM=1 to your make command.${nl}\
-************************************************************************${nl})
-    endif
-  # Need to pass -Wl twice here to get past both apxs2 and libtool, as
-  # libtool will add the path to the RPATH of the library if passed -L/some/path
-  LIBAPPARMOR_FLAGS = -I$(LIBAPPARMOR_INCLUDE) -Wl,-Wl,-L$(LIBAPPARMOR_PATH)
-  LDLIBS = -lapparmor
-endif
+# Need to pass -Wl twice here to get past both apxs2 and libtool, as
+# libtool will add the path to the RPATH of the library if passed -L/some/path
+LIBAPPARMOR_FLAGS=-I../../libraries/libapparmor/src -Wl,-Wl,-L../../libraries/libapparmor/src/.libs
+LDLIBS=-lapparmor
 
-APXS_CFLAGS="-Wc,$(EXTRA_WARNINGS)"
-
-.PHONY: libapparmor_check
-.SILENT: libapparmor_check
-libapparmor_check: ; $(ERROR_MESSAGE)
-
-all: libapparmor_check $(TARGET) docs
-
-.PHONY: docs
-docs: ${MANPAGES} ${HTMLMANPAGES}
+all: $(TARGET) ${MANPAGES} ${HTMLMANPAGES}
 
 %.so: %.c
-	${APXS} ${LIBAPPARMOR_FLAGS} ${APXS_CFLAGS} -c $< ${LDLIBS}
+	${APXS} ${LIBAPPARMOR_FLAGS} -c $< ${LDLIBS}
 	mv .libs/$@ .
 
 .PHONY: install
 install: ${TARGET} ${MANPAGES}
 	mkdir -p ${DESTDIR}/${APXS_INSTALL_DIR}
 	install -m 755 $< ${DESTDIR}/${APXS_INSTALL_DIR}
-	$(MAKE) install_manpages DESTDIR=${DESTDIR}
+	make install_manpages DESTDIR=${DESTDIR}
 
 .PHONY: clean
-clean: pod_clean
+clean: _clean
 	rm -rf .libs
-	rm -f *.la *.lo *.so *.o *.slo
-
-.PHONY: check
-check: check_pod_files
+	rm -f *.la *.lo *.so *.o *.slo Make.rules

changehat/mod_apparmor/apache2-mod_apparmor.spec.in

@@ -0,0 +1,215 @@
+# ----------------------------------------------------------------------
+#    Copyright (c) 2004, 2005 NOVELL (All rights reserved)
+#
+#    This program is free software; you can redistribute it and/or
+#    modify it under the terms of version 2 of the GNU General Public
+#    License published by the Free Software Foundation.
+#
+#    This program is distributed in the hope that it will be useful,
+#    but WITHOUT ANY WARRANTY; without even the implied warranty of
+#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#    GNU General Public License for more details.
+#
+#    You should have received a copy of the GNU General Public License
+#    along with this program; if not, contact Novell, Inc.
+# ----------------------------------------------------------------------
+# norootforbuild
+
+# Check first to see if distro is already defined.
+# I hate rpm macros
+%if ! %{?distro:1}0
+%if %{?suse_version:1}0
+  %define distro suse
+%endif
+%if %{?fedora_version:1}0
+  %define distro redhat
+%endif
+%endif
+%if ! %{?distro:1}0
+  %define distro suse
+%endif
+
+# this is required to be underscore
+%define module_name mod_apparmor
+
+Summary: AppArmor module for apache2.
+Name: apache2-mod_apparmor
+Version: @@immunix_version@@
+Release: @@repo_version@@
+Group: Applications/System
+Source0: %{name}-%{version}-@@repo_version@@.tar.gz
+License: LGPL
+BuildRoot: %{?_tmppath:}%{!?_tmppath:/var/tmp}/%{name}-%{version}-build
+Url: http://forge.novell.com/modules/xfmod/project/?apparmor
+Obsoletes: mod_change_hat mod-change-hat mod-apparmor apache2-mod-apparmor
+Provides: mod_change_hat mod-change-hat mod-apparmor apache2-mod-apparmor
+
+%if %{distro} == "suse"
+%if 0%{?suse_version} < 1010
+BuildRequires: libimmunix
+%else
+%if 0%{?suse_version} < 1030
+BuildRequires: libapparmor
+%else
+BuildRequires: libapparmor-devel
+%endif
+%endif
+%else
+BuildRequires: libapparmor-devel
+%endif
+
+%if %{distro} == "suse"
+%define apxs /usr/sbin/apxs2
+%define apache_mmn        %(MMN=$(%{apxs} -q LIBEXECDIR)_MMN; test -x $MMN && $MMN)
+Prereq: apache2-prefork
+Prereq: apparmor-parser
+BuildRequires: apache2-devel
+Requires:     apache2 %{apache_mmn}
+%else
+%if %{distro} == "redhat" || %{distro} == "rhel4"
+%define apxs /usr/sbin/apxs
+Prereq: httpd
+BuildRequires: httpd-devel
+%endif
+%endif
+%define module_path 		%(%{apxs} -q LIBEXECDIR)
+%define apache_sysconfdir	%(%{apxs} -q SYSCONFDIR)
+
+%description
+apache2-mod_apparmor adds support to apache2 to provide AppArmor confinement
+to individual cgi scripts handled by apache modules like mod_php and
+mod_perl.
+This package is part of a suite of tools that used to be named SubDomain.
+
+%prep
+
+%setup -q
+
+%build
+make APXS=%{apxs}
+
+%install
+make install DESTDIR=${RPM_BUILD_ROOT} DISTRO=%{distro} MANDIR=%{_mandir}
+
+%if %{distro} == "suse"
+       mkdir -p ${RPM_BUILD_ROOT}%{_libdir}/apache2-prefork/
+       ln -s %{module_path}/%{module_name}.so ${RPM_BUILD_ROOT}%{_libdir}/apache2-prefork/%{module_name}.so
+%else 
+  %if %{distro} == "redhat" || %{distro} == "rhel4"
+  	mkdir -p ${RPM_BUILD_ROOT}/%{apache_sysconfdir}.d/
+	install -m 644 %{module_name}.conf ${RPM_BUILD_ROOT}/%{apache_sysconfdir}.d/
+  %endif
+%endif
+
+%clean 
+[ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT
+
+%files
+%defattr(-,root,root)
+%{module_path}
+%if %{distro} == "suse"
+   %{_libdir}/apache2-prefork/%{module_name}.so
+%else
+  %if %{distro} == "redhat" || %{distro} == "rhel4"
+    %{apache_sysconfdir}.d/%{module_name}.conf
+  %endif
+%endif
+%doc COPYING.LGPL
+%{_mandir}/man*/*
+%doc *.[0-9].html
+%doc common/apparmor.css
+
+%post
+%if %{distro} == "suse"
+  /usr/sbin/a2enmod apparmor
+%endif
+
+%preun
+%if %{distro} == "suse"
+  if [ $1 = 0 ] ; then
+    /usr/sbin/a2dismod apparmor
+  fi
+%endif
+
+%triggerpostun -- mod_change_hat mod-change-hat
+%if %{distro} == "suse"
+  /usr/sbin/a2enmod apparmor
+%endif
+
+%changelog
+* Sun Jul 29 2007 - sbeattie@suse.de
+- Convert builddep on libapparmor to libapparmor-devel
+* Tue Apr  3 2007 - sbeattie@suse.de
+- Add mod_apparmor manpage to package
+* Wed Sep 06 2006 - poeml@suse.de
+- rename to apache2-mod_apparmor
+- use a2enmod instead of frob_sysconfig
+- remove SuSEconfig calls
+* Fri May 26 2006 - schwab@suse.de
+- Don't strip binaries.
+* Wed Apr 12 2006 - Steve Beattie <sbeattie@suse.de>
+- Move to novell forge svn repo; fix build issue with new layout
+* Thu Mar 30 2006 - Seth Arnold <seth.arnold@suse.de> 2.0-7.2
+- Relicense to LGPL
+* Mon Jan 30 2006 - Steve Beattie <sbeattie@suse.de> 2.0-7.1
+- Renamed apache config options:
+	ImmhatName -> AAHatName
+	ImmDefaultHatName -> AADefaultHatName
+* Mon Jan 30 2006 - poeml@suse.de
+- removed libapr-util1-devel from BuildRequires (apache2-devel does
+  require it)
+* Fri Jan 27 2006 Steve Beattie <sbeattie@suse.de> 2.0-6.1
+- No more neededforbuild in STABLE
+* Wed Jan 25 2006 Steve Beattie <sbeattie@suse.de> 2.0-6
+- Fix linking against libapparmor.so
+* Sun Jan  8 2006 Steve Beattie <sbeattie@suse.de> 2.0-5
+- More SUSE autobuild fixups.
+* Wed Jan  4 2006 Steve Beattie <sbeattie@suse.de> 2.0-4
+- Fixup SUSE autobuild require on apache-devel-packages
+- Add svn revision to the source tarball
+* Sun Dec 18 2005 Steve Beattie <sbeattie@novell.com> 2.0-3
+- Include symlink in %{_libdir}/apache2-prefork/
+* Thu Dec  8 2005 Steve Beattie <sbeattie@novell.com> 2.0-2
+- Rename to apache2-mod-apparmor for consistency w/SUSE packages
+- Rename module to mod_apparmor.so
+* Wed Dec  7 2005 Steve Beattie <sbeattie@novell.com> 2.0-1
+- Reset version for inclusion in SUSE autobuild
+* Mon Dec  5 2005 Steve Beattie <sbeattie@novell.com> 1.99-9
+- Rename package to mod-apparmor
+* Wed Nov 30 2005 Steve Beattie <sbeattie@novell.com> 1.99-8
+- Minor packaging cleanups
+* Wed Nov 30 2005 Steve Beattie <sbeattie@novell.com> 1.99-7_imnx
+- Convert license to GPL
+* Thu Jun 23 2005 Steve Beattie <sbeattie@novell.com> 1.99-6_imnx
+- Add trigger for mod_change_hat => mod-change-hat upgrades
+- Don't run SuSEconfig on SuSE 9.3 or newer
+* Mon May 23 2005 Steve Beattie <sbeattie@novell.com> 1.99-5_imnx
+- Fix package uninstall on RHEL4.
+* Fri Mar 11 2005 Steve Beattie <steve@immunix.com> 1.99-4_imnx
+- Rename to be consistent with other packages
+* Fri Feb 18 2005 Steve Beattie <steve@immunix.com> 1.99-3_imnx
+- Cleanup some non-64bit clean code, sigh.
+- Fix install locations on 64-bit platform.
+* Fri Feb  4 2005 Seth Arnold <sarnold@immunix.coM> 1.99-1_imnx
+- Reversion to 1.99
+* Fri Nov 12 2004 Steve Beattie <steve@immunix.com> 1.2-2_imnx
+- Add configuration file for redhat build
+* Tue Oct 12 2004 Steve Beattie <steve@immunix.com> 1.2-1_imnx
+- Bump version after shass-1.1 branched off
+* Mon Sep 20 2004 Dominic Reynolds <dominic@immunix.com> 1.0-7_imnx_(redhat|suse)
+- Modified to build separate versions for suse/redhat (EL3).
+- Note:RH version does not currently setup the module configuraiton
+- in apache.
+* Tue Aug 31 2004 Steve Beattie <steve@immunix.com> 1.0-6_imnx
+- Got location and per server config directives working somewhat
+  correctly :-)
+- copyright fixups.
+* Fri Aug 20 2004 Steve Beattie <steve@immunix.com> 1.0-5_imnx
+- added support for <Location> hatname </Location>
+* Wed Jul 21 2004 Steve Beattie <steve@immunix.com> 1.0-4_imnx
+- reduced loglevel of some debug messages
+- add change_hat to list of apache modules
+* Tue Jul 20 2004 Steve Beattie <steve@immunix.com> 1.0-2_imnx
+- got module actually working, at least in simple cases.
+* Thu Jul 15 2004 Steve Beattie <steve@immunix.com> 1.0-1_imnx
+- Initial package creation.

changehat/mod_apparmor/mod_apparmor.c

@@ -1,13 +1,12 @@
 /*
  *   Copyright (c) 2004, 2005, 2006 NOVELL (All rights reserved)
- *   Copyright (c) 2014 Canonical, Ltd. (All rights reserved)
  *
  *    The mod_apparmor module is licensed under the terms of the GNU
  *    Lesser General Public License, version 2.1. Please see the file
  *    COPYING.LGPL.
  *
  * mod_apparmor - (apache 2.0.x)
- * Author: Steve Beattie <steve@nxnw.org>
+ * Author: Steve Beattie <sbeattie@suse.de>
  *
  * This currently only implements change_hat functionality, but could be
  * extended for other stuff we decide to do.
@@ -18,244 +17,183 @@
 #include "http_config.h"
 #include "http_request.h"
 #include "http_log.h"
-#include "http_main.h"
 #include "http_protocol.h"
 #include "util_filter.h"
 #include "apr.h"
 #include "apr_strings.h"
 #include "apr_lib.h"
 
-#include <sys/apparmor.h>
+#include <apparmor.h>
 #include <unistd.h>
 
 /* #define DEBUG */
-
-#ifndef unused_
-#define unused_ __attribute__ ((unused))
+#ifndef __unused
+#define __unused __attribute__((unused))
 #endif
 
 /* should the following be configurable? */
 #define DEFAULT_HAT "HANDLING_UNTRUSTED_INPUT"
 #define DEFAULT_URI_HAT "DEFAULT_URI"
 
-/* Compatibility with apache 2.2 */
-#if AP_SERVER_MAJORVERSION_NUMBER == 2 && AP_SERVER_MINORVERSION_NUMBER < 3
-  #define APLOG_TRACE1 APLOG_DEBUG
-  server_rec *ap_server_conf = NULL;
-#endif
-
-#ifdef APLOG_USE_MODULE
-  APLOG_USE_MODULE(apparmor);
-#endif
 module AP_MODULE_DECLARE_DATA apparmor_module;
 
-static unsigned long magic_token = 0;
+static unsigned int magic_token = 0;
 static int inside_default_hat = 0;
 
 typedef struct {
-        const char *hat_name;
-        char *path;
-} apparmor_dir_cfg;
+	const char * hat_name;
+	char * path;
+} immunix_dir_cfg;
 
 typedef struct {
-        const char *hat_name;
-        int is_initialized;
-} apparmor_srv_cfg;
+	const char * hat_name;
+	int is_initialized;
+} immunix_srv_cfg;
 
-/* aa_init() gets invoked in the post_config stage of apache.
+/* immunix_init() gets invoked in the post_config stage of apache.
  * Unfortunately, apache reads its config once when it starts up, then
  * it re-reads it when goes into its restart loop, where it starts it's
  * children. This means we cannot call change_hat here, as the modules
  * memory will be wiped out, and the magic_token will be lost, so apache
  * wouldn't be able to change_hat back out. */
-static int
-aa_init(apr_pool_t *p, unused_ apr_pool_t *plog, unused_ apr_pool_t *ptemp, unused_ server_rec *s)
+static int 
+immunix_init (apr_pool_t *p, apr_pool_t *plog, apr_pool_t *ptemp, server_rec *s)
 {
-    apr_file_t *file;
-    apr_size_t size = sizeof(magic_token);
+    apr_file_t * file;
+    apr_size_t size = sizeof (magic_token);
     int ret;
 
     ret = apr_file_open (&file, "/dev/urandom", APR_READ, APR_OS_DEFAULT, p);
     if (!ret) {
-        apr_file_read(file, (void *) &magic_token, &size);
-        apr_file_close(file);
+    	apr_file_read (file, (void *) &magic_token, &size);
+	apr_file_close (file);
     } else {
-        ap_log_error(APLOG_MARK, APLOG_ERR, errno, ap_server_conf,
-                     "Failed to open /dev/urandom");
+        ap_log_error (APLOG_MARK, APLOG_ERR, 0, NULL, "Failed to open /dev/urandom");
     }
-    ap_log_error(APLOG_MARK, APLOG_TRACE1, 0, ap_server_conf,
-                 "Opened /dev/urandom successfully");
+    ap_log_error (APLOG_MARK, APLOG_DEBUG, 0, NULL, "Opened /dev/urandom successfully");
 
     return OK;
 }
-
+    
 /* As each child starts up, we'll change_hat into a default hat, mostly
  * to protect ourselves from bugs in parsing network input, but before
  * we change_hat to the uri specific hat. */
-static void
-aa_child_init(unused_ apr_pool_t *p, unused_ server_rec *s)
+static void 
+immunix_child_init (apr_pool_t *p, server_rec *s)
 {
     int ret;
 
-    ap_log_error(APLOG_MARK, APLOG_TRACE1, 0, ap_server_conf,
-                 "init: calling change_hat with '%s'", DEFAULT_HAT);
-    ret = aa_change_hat(DEFAULT_HAT, magic_token);
+    ap_log_error (APLOG_MARK, APLOG_DEBUG, 0, NULL, "init: calling change_hat");
+    ret = change_hat (DEFAULT_HAT, magic_token);
     if (ret < 0) {
-        ap_log_error(APLOG_MARK, APLOG_ERR, errno, ap_server_conf,
-                     "Failed to change_hat to '%s'", DEFAULT_HAT);
+    	change_hat (NULL, magic_token);
+        ap_log_error (APLOG_MARK, APLOG_ERR, 0, NULL, "Failed to change_hat to '%s'",
+			DEFAULT_HAT);
     } else {
         inside_default_hat = 1;
     }
-}
+}    			 
 
+#ifdef DEBUG
 static void
-debug_dump_uri(request_rec *r)
+debug_dump_uri (apr_uri_t * uri) 
 {
-    apr_uri_t *uri = &r->parsed_uri;
-    if (uri)
-        ap_log_rerror(APLOG_MARK, APLOG_TRACE1, 0, r, "Dumping uri info "
-                      "scheme='%s' host='%s' path='%s' query='%s' fragment='%s'",
-                      uri->scheme, uri->hostname, uri->path, uri->query,
-                      uri->fragment);
+    if (uri) 
+    	ap_log_error (APLOG_MARK, APLOG_ERR, 0, NULL, "Dumping uri info "
+    	          "scheme='%s' host='%s' path='%s' query='%s' fragment='%s'",
+    		  uri->scheme, uri->hostname, uri->path, uri->query,
+		  uri->fragment);
     else
-        ap_log_rerror(APLOG_MARK, APLOG_TRACE1, 0, r, "Asked to dump NULL uri");
+    	ap_log_error (APLOG_MARK, APLOG_ERR, 0, NULL, "Asked to dump NULL uri");
 
 }
-
-/*
-   aa_enter_hat will attempt to change_hat in the following order:
+#else
+static void
+debug_dump_uri (apr_uri_t * __unused uri) { }
+#endif
+    
+/* 
+   immunix_enter_hat will attempt to change_hat in the following order:
    (1) to a hatname in a location directive
-   (2) to the server name or a defined per-server default
-   (3) to the server name + "-" + uri
-   (4) to the uri
-   (5) to DEFAULT_URI
-   (6) back to the parent profile
+   (2) to the uri
+   (3) to a per-server default 
+   (4) to DEFAULT_URI
+   (5) back to the parent profile
 */
-static int
-aa_enter_hat(request_rec *r)
+static int 
+immunix_enter_hat (request_rec *r)
 {
-    int aa_ret = -1;
-    apparmor_dir_cfg *dcfg = (apparmor_dir_cfg *)
-                    ap_get_module_config(r->per_dir_config, &apparmor_module);
-    apparmor_srv_cfg *scfg = (apparmor_srv_cfg *)
-                    ap_get_module_config(r->server->module_config, &apparmor_module);
-    const char *aa_hat_array[6] = { NULL, NULL, NULL, NULL, NULL, NULL };
-    int i = 0;
-    char *aa_label, *aa_mode, *aa_hat;
-    const char *vhost_uri;
+    int sd_ret = -1;
+    immunix_dir_cfg * dcfg = (immunix_dir_cfg *) 
+    		ap_get_module_config (r->per_dir_config, &apparmor_module);
+    immunix_srv_cfg * scfg = (immunix_srv_cfg *) 
+    		ap_get_module_config (r->server->module_config, &apparmor_module);
 
-    debug_dump_uri(r);
-    ap_log_rerror(APLOG_MARK, APLOG_TRACE1, 0, r, "aa_enter_hat (%s) n:0x%lx p:0x%lx main:0x%lx",
-                  dcfg->path, (unsigned long) r->next, (unsigned long) r->prev,
-                  (unsigned long) r->main);
+    debug_dump_uri (&r->parsed_uri);
+    ap_log_error (APLOG_MARK, APLOG_DEBUG, 0, NULL, "in immunix_enter_hat (%s) n:0x%lx p:0x%lx main:0x%lx", 
+    	dcfg->path, (unsigned long) r->next, (unsigned long) r->prev, 
+	(unsigned long) r->main);
 
     /* We only call change_hat for the main request, not subrequests */
-    if (r->main)
-        return OK;
+    if (r->main) 
+    	return OK;
 
     if (inside_default_hat) {
-        aa_change_hat(NULL, magic_token);
-        inside_default_hat = 0;
+        change_hat (NULL, magic_token);
+	inside_default_hat = 0;
     }
 
     if (dcfg != NULL && dcfg->hat_name != NULL) {
-        ap_log_rerror(APLOG_MARK, APLOG_DEBUG, 0, r,
-                      "[dcfg] adding hat '%s' to aa_change_hat vector", dcfg->hat_name);
-        aa_hat_array[i++] = dcfg->hat_name;
+        ap_log_error (APLOG_MARK, APLOG_DEBUG, 0, NULL, "calling change_hat [dcfg] %s", dcfg->hat_name);
+        sd_ret = change_hat (dcfg->hat_name, magic_token);
+	if (sd_ret < 0) {
+	    change_hat (NULL, magic_token);
+	} else {
+	    return OK;
+	}
     }
 
-    if (scfg) {
-        ap_log_rerror(APLOG_MARK, APLOG_TRACE1, 0, r, "Dumping scfg info: "
-                      "scfg='0x%lx' scfg->hat_name='%s'",
-                      (unsigned long) scfg, scfg->hat_name);
+    ap_log_error (APLOG_MARK, APLOG_DEBUG, 0, NULL, "calling change_hat [uri] %s", r->uri);
+    sd_ret = change_hat (r->uri, magic_token);
+    if (sd_ret < 0) {
+    	change_hat (NULL, magic_token);
     } else {
-        ap_log_rerror(APLOG_MARK, APLOG_TRACE1, 0, r, "scfg is null");
-    }
-    if (scfg != NULL) {
-        if (scfg->hat_name != NULL) {
-            ap_log_rerror(APLOG_MARK, APLOG_DEBUG, 0, r,
-                          "[scfg] adding hat '%s' to aa_change_hat vector", scfg->hat_name);
-            aa_hat_array[i++] = scfg->hat_name;
-        } else {
-            ap_log_rerror(APLOG_MARK, APLOG_DEBUG, 0, r,
-                          "[scfg] adding server_name '%s' to aa_change_hat vector",
-                          r->server->server_hostname);
-            aa_hat_array[i++] = r->server->server_hostname;
-        }
-
-        vhost_uri = apr_pstrcat(r->pool, r->server->server_hostname, "-", r->uri, NULL);
-        ap_log_rerror(APLOG_MARK, APLOG_DEBUG, 0, r,
-                      "[vhost+uri] adding vhost+uri '%s' to aa_change_hat vector", vhost_uri);
-        aa_hat_array[i++] = vhost_uri;
+	    return OK;
     }
 
-    ap_log_rerror(APLOG_MARK, APLOG_DEBUG, 0, r,
-                  "[uri] adding uri '%s' to aa_change_hat vector", r->uri);
-    aa_hat_array[i++] = r->uri;
-
-    ap_log_rerror(APLOG_MARK, APLOG_DEBUG, 0, r,
-                  "[default] adding '%s' to aa_change_hat vector", DEFAULT_URI_HAT);
-    aa_hat_array[i++] = DEFAULT_URI_HAT;
-
-    aa_ret = aa_change_hatv(aa_hat_array, magic_token);
-    if (aa_ret < 0) {
-        ap_log_rerror(APLOG_MARK, APLOG_WARNING, errno, r, "aa_change_hatv call failed");
+    if (scfg != NULL && scfg->hat_name != NULL) {
+        ap_log_error (APLOG_MARK, APLOG_DEBUG, 0, NULL, "calling change_hat [scfg] %s", scfg->hat_name);
+        sd_ret = change_hat (scfg->hat_name, magic_token);
+	if (sd_ret < 0) {
+	    change_hat (NULL, magic_token);
+	} else {
+	    return OK;
+	}
     }
 
-    /* Check to see if a defined AAHatName or AADefaultHatName would
-     * apply, but wasn't the hat we landed up in; report a warning if
-     * that's the case. */
-    aa_ret = aa_getcon(&aa_label, &aa_mode);
-    if (aa_ret < 0) {
-        ap_log_rerror(APLOG_MARK, APLOG_WARNING, errno, r, "aa_getcon call failed");
-    } else {
-        ap_log_rerror(APLOG_MARK, APLOG_TRACE1, 0, r,
-                      "AA checks: aa_getcon result is '%s', mode '%s'", aa_label, aa_mode);
-        /* TODO: use libapparmor get hat_name fn here once it is implemented */
-        aa_hat = strstr(aa_label, "//");
-        if (aa_hat != NULL && strcmp(aa_mode, "enforce") == 0) {
-            aa_hat += 2;  /* skip "//" */
-            ap_log_rerror(APLOG_MARK, APLOG_TRACE1, 0, r,
-                          "AA checks: apache is in hat '%s', mode '%s'", aa_hat, aa_mode);
-            if (dcfg != NULL && dcfg->hat_name != NULL) {
-                if (strcmp(aa_hat, dcfg->hat_name) != 0)
-                    ap_log_rerror(APLOG_MARK, APLOG_WARNING, 0, r,
-                        "AAHatName '%s' applies, but does not appear to be a hat in the apache apparmor policy",
-                        dcfg->hat_name);
-            } else if (scfg != NULL && scfg->hat_name != NULL) {
-                if (strcmp(aa_hat, scfg->hat_name) != 0 &&
-                    strcmp(aa_hat, r->uri) != 0)
-                    ap_log_rerror(APLOG_MARK, APLOG_WARNING, 0, r,
-                        "AADefaultHatName '%s' applies, but does not appear to be a hat in the apache apparmor policy",
-                        scfg->hat_name);
-            }
-        }
-        free(aa_label);
-    }
+    ap_log_error (APLOG_MARK, APLOG_DEBUG, 0, NULL, "calling change_hat DEFAULT_URI");
+    sd_ret = change_hat (DEFAULT_URI_HAT, magic_token);
+    if (sd_ret < 0) change_hat (NULL, magic_token);
 
     return OK;
 }
 
-static int
-aa_exit_hat(request_rec *r)
+static int 
+immunix_exit_hat (request_rec *r)
 {
-    int aa_ret;
-    apparmor_dir_cfg *dcfg = (apparmor_dir_cfg *)
-                    ap_get_module_config(r->per_dir_config, &apparmor_module);
-    /* apparmor_srv_cfg *scfg = (apparmor_srv_cfg *)
-                    ap_get_module_config(r->server->module_config, &apparmor_module); */
-    ap_log_rerror(APLOG_MARK, APLOG_TRACE1, 0, r, "exiting change_hat: dir hat %s dir path %s",
-                  dcfg->hat_name, dcfg->path);
+    int sd_ret;
+    immunix_dir_cfg * dcfg = (immunix_dir_cfg *) 
+    		ap_get_module_config (r->per_dir_config, &apparmor_module);
+    /* immunix_srv_cfg * scfg = (immunix_srv_cfg *)
+    		ap_get_module_config (r->server->module_config, &apparmor_module); */
+    ap_log_error (APLOG_MARK, APLOG_DEBUG, 0, NULL, "exiting change_hat - dir hat %s path %s", dcfg->hat_name, dcfg->path);
+    change_hat (NULL, magic_token);
 
-    /* can convert the following back to aa_change_hat() when the
-     * aa_change_hat() bug addressed in trunk commit 2329 lands in most
-     * system libapparmors */
-    aa_change_hatv(NULL, magic_token);
-
-    aa_ret = aa_change_hat(DEFAULT_HAT, magic_token);
-    if (aa_ret < 0) {
-        ap_log_rerror(APLOG_MARK, APLOG_ERR, errno, r,
-                      "Failed to change_hat to '%s'", DEFAULT_HAT);
+    sd_ret = change_hat (DEFAULT_HAT, magic_token);
+    if (sd_ret < 0) {
+    	change_hat (NULL, magic_token);
+        ap_log_error (APLOG_MARK, APLOG_ERR, 0, NULL, "Failed to change_hat to '%s'",
+			DEFAULT_HAT);
     } else {
         inside_default_hat = 1;
     }
@@ -264,15 +202,15 @@ aa_exit_hat(request_rec *r)
 }
 
 static const char *
-aa_cmd_ch_path(unused_ cmd_parms *cmd, unused_ void *mconfig, const char *parm1)
+aa_cmd_ch_path (cmd_parms * cmd, void * mconfig, const char * parm1)
 {
-    ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, ap_server_conf, "directory config change hat %s",
-                 parm1 ? parm1 : "DEFAULT");
-    apparmor_dir_cfg *dcfg = mconfig;
+    ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, NULL, "config change hat %s",
+    			parm1 ? parm1 : "DEFAULT");
+    immunix_dir_cfg * dcfg = mconfig;
     if (parm1 != NULL) {
-        dcfg->hat_name = parm1;
+    	dcfg->hat_name = parm1;
     } else {
-        dcfg->hat_name = "DEFAULT";
+    	dcfg->hat_name = "DEFAULT";
     }
     return NULL;
 }
@@ -280,27 +218,26 @@ aa_cmd_ch_path(unused_ cmd_parms *cmd, unused_ void *mconfig, const char *parm1)
 static int path_warn_once;
 
 static const char *
-immunix_cmd_ch_path(cmd_parms *cmd, void *mconfig, const char *parm1)
+immunix_cmd_ch_path (cmd_parms * cmd, void * mconfig, const char * parm1)
 {
     if (path_warn_once == 0) {
-        ap_log_error(APLOG_MARK, APLOG_NOTICE, 0, ap_server_conf, "ImmHatName is "
-                     "deprecated, please use AAHatName instead");
-        path_warn_once = 1;
+    	ap_log_error(APLOG_MARK, APLOG_NOTICE, 0, NULL, "ImmHatName is "
+		     "deprecated, please use AAHatName instead");
+	path_warn_once = 1;
     }
     return aa_cmd_ch_path(cmd, mconfig, parm1);
 }
 
 static const char *
-aa_cmd_ch_srv(cmd_parms *cmd, unused_ void *mconfig, const char *parm1)
+aa_cmd_ch_srv (cmd_parms * cmd, void * mconfig, const char * parm1)
 {
-    ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, ap_server_conf, "server config change hat %s",
-                            parm1 ? parm1 : "DEFAULT");
-    apparmor_srv_cfg *scfg = (apparmor_srv_cfg *)
-            ap_get_module_config(cmd->server->module_config, &apparmor_module);
+    ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, NULL, "config change hat %s",
+    			parm1 ? parm1 : "DEFAULT");
+    immunix_srv_cfg * scfg = mconfig;
     if (parm1 != NULL) {
-        scfg->hat_name = parm1;
+    	scfg->hat_name = parm1;
     } else {
-        scfg->hat_name = "DEFAULT";
+    	scfg->hat_name = "DEFAULT";
     }
     return NULL;
 }
@@ -308,29 +245,27 @@ aa_cmd_ch_srv(cmd_parms *cmd, unused_ void *mconfig, const char *parm1)
 static int srv_warn_once;
 
 static const char *
-immunix_cmd_ch_srv(cmd_parms *cmd, void *mconfig, const char *parm1)
+immunix_cmd_ch_srv (cmd_parms * cmd, void * mconfig, const char * parm1)
 {
     if (srv_warn_once == 0) {
-        ap_log_error(APLOG_MARK, APLOG_NOTICE, 0, ap_server_conf, "ImmDefaultHatName is "
-                     "deprecated, please use AADefaultHatName instead");
-        srv_warn_once = 1;
+	ap_log_error(APLOG_MARK, APLOG_NOTICE, 0, NULL, "ImmDefaultHatName is "
+		     "deprecated, please use AADefaultHatName instead");
+	srv_warn_once = 1;
     }
     return aa_cmd_ch_srv(cmd, mconfig, parm1);
 }
 
 static void *
-aa_create_dir_config(apr_pool_t *p, char *path)
+immunix_create_dir_config (apr_pool_t * p, char * path)
 {
-    apparmor_dir_cfg *newcfg = (apparmor_dir_cfg *) apr_pcalloc(p, sizeof(*newcfg));
+    immunix_dir_cfg * newcfg = (immunix_dir_cfg *) apr_pcalloc(p, sizeof(* newcfg));
 
-    ap_log_error(APLOG_MARK, APLOG_TRACE1, 0, ap_server_conf,
-                 "aa_create_dir_cfg (%s)", path ? path : ":no path:");
+    ap_log_error (APLOG_MARK, APLOG_DEBUG, 0, NULL, "in immunix_create_dir (%s)", path ? path : ":no path:");
     if (newcfg == NULL) {
-        ap_log_error(APLOG_MARK, APLOG_ERR, 0, ap_server_conf,
-                     "aa_create_dir_config: couldn't alloc dir config");
-        return NULL;
+        ap_log_error (APLOG_MARK, APLOG_ERR, 0, NULL, "immunix_create_dir: couldn't alloc dir config");
+    	return NULL;
     }
-    newcfg->path = apr_pstrdup(p, path ? path : ":no path:");
+    newcfg->path = apr_pstrdup (p, path ? path : ":no path:");
 
     return newcfg;
 }
@@ -338,85 +273,83 @@ aa_create_dir_config(apr_pool_t *p, char *path)
 /* XXX: Should figure out an appropriate action to take here, if any
 
 static void *
-aa_merge_dir_config(apr_pool_t *p, void *parent, void *child)
+immunix_merge_dir_config (apr_pool_t * p, void * parent, void * child)
 {
-    apparmor_dir_cfg *newcfg = (apparmor_dir_cfg *) apr_pcalloc(p, sizeof(*newcfg));
+    immunix_dir_cfg * newcfg = (immunix_dir_cfg *) apr_pcalloc(p, sizeof(* newcfg));
 
-    ap_log_error(APLOG_MARK, APLOG_TRACE1, 0, ap_server_conf, "in immunix_merge_dir ()");
+    ap_log_error (APLOG_MARK, APLOG_DEBUG, 0, NULL, "in immunix_merge_dir ()");
     if (newcfg == NULL)
-            return NULL;
+    	return NULL;
 
     return newcfg;
 }
 */
 
 static void *
-aa_create_srv_config(apr_pool_t *p, unused_ server_rec *srv)
+immunix_create_srv_config (apr_pool_t * p, server_rec * srv)
 {
-    apparmor_srv_cfg *newcfg = (apparmor_srv_cfg *) apr_pcalloc(p, sizeof(*newcfg));
+    immunix_srv_cfg * newcfg = (immunix_srv_cfg *) apr_pcalloc(p, sizeof(* newcfg));
 
-    ap_log_error(APLOG_MARK, APLOG_TRACE1, 0, ap_server_conf,
-                 "in aa_create_srv_config");
+    ap_log_error (APLOG_MARK, APLOG_DEBUG, 0, NULL, "in immunix_create_srv");
     if (newcfg == NULL) {
-        ap_log_error(APLOG_MARK, APLOG_ERR, 0, ap_server_conf,
-                     "aa_create_srv_config: couldn't alloc srv config");
-        return NULL;
+        ap_log_error (APLOG_MARK, APLOG_ERR, 0, NULL, "immunix_create_srv: couldn't alloc srv config");
+    	return NULL;
     }
 
     return newcfg;
 }
 
 
-static const command_rec mod_apparmor_cmds[] = {
+static const command_rec immunix_cmds[] = {
 
-    AP_INIT_TAKE1(
+    AP_INIT_TAKE1 (
         "ImmHatName",
-        immunix_cmd_ch_path,
-        NULL,
-        ACCESS_CONF,
-        ""
+	immunix_cmd_ch_path,
+	NULL,
+	ACCESS_CONF,
+	""
     ),
-    AP_INIT_TAKE1(
+    AP_INIT_TAKE1 (
         "ImmDefaultHatName",
-        immunix_cmd_ch_srv,
-        NULL,
-        RSRC_CONF,
-        ""
+	immunix_cmd_ch_srv,
+	NULL,
+	RSRC_CONF,
+	""
     ),
-    AP_INIT_TAKE1(
+    AP_INIT_TAKE1 (
         "AAHatName",
-        aa_cmd_ch_path,
-        NULL,
-        ACCESS_CONF,
-        ""
+	aa_cmd_ch_path,
+	NULL,
+	ACCESS_CONF,
+	""
     ),
-    AP_INIT_TAKE1(
+    AP_INIT_TAKE1 (
         "AADefaultHatName",
-        aa_cmd_ch_srv,
-        NULL,
-        RSRC_CONF,
-        ""
+	aa_cmd_ch_srv,
+	NULL,
+	RSRC_CONF,
+	""
     ),
     { NULL }
 };
 
-static void
-register_hooks(unused_ apr_pool_t *p)
+static void 
+register_hooks (apr_pool_t *p)
 {
-    ap_hook_post_config(aa_init, NULL, NULL, APR_HOOK_MIDDLE);
-    ap_hook_child_init(aa_child_init, NULL, NULL, APR_HOOK_MIDDLE);
-    ap_hook_access_checker(aa_enter_hat, NULL, NULL, APR_HOOK_FIRST);
-    /* ap_hook_post_read_request(aa_enter_hat, NULL, NULL, APR_HOOK_FIRST); */
-    ap_hook_log_transaction(aa_exit_hat, NULL, NULL, APR_HOOK_LAST);
+    ap_hook_post_config (immunix_init, NULL, NULL, APR_HOOK_MIDDLE);
+    ap_hook_child_init (immunix_child_init, NULL, NULL, APR_HOOK_MIDDLE);
+    ap_hook_access_checker(immunix_enter_hat, NULL, NULL, APR_HOOK_FIRST);
+    /* ap_hook_post_read_request(immunix_enter_hat, NULL, NULL, APR_HOOK_FIRST); */
+    ap_hook_log_transaction(immunix_exit_hat, NULL, NULL, APR_HOOK_LAST);
 }
 
 module AP_MODULE_DECLARE_DATA apparmor_module = {
     STANDARD20_MODULE_STUFF,
-    aa_create_dir_config,        /* dir config creator */
-    NULL,                        /* dir merger --- default is to override */
-    /* immunix_merge_dir_config, */        /* dir merger --- default is to override */
-    aa_create_srv_config,        /* server config */
-    NULL,                        /* merge server config */
-    mod_apparmor_cmds,           /* command table */
-    register_hooks               /* register hooks */
+    immunix_create_dir_config,	/* dir config creater */
+    NULL,			/* dir merger --- default is to override */
+    /* immunix_merge_dir_config, */	/* dir merger --- default is to override */
+    immunix_create_srv_config,	/* server config */
+    NULL,			/* merge server config */
+    immunix_cmds,		/* command table */
+    register_hooks		/* register hooks */
 };

changehat/mod_apparmor/mod_apparmor.pod

@@ -40,15 +40,11 @@ apache2(8)/httpd(8) configuration files, and restart Apache. Make sure that
 apparmor is also functioning.
 
 Once mod_apparmor is loaded within Apache, all requests to Apache will
-cause mod_apparmor to attempt to change into a hat that matches the
-ServerName for the server/vhost.  If no such hat is found, it will
-first fall back by attempting to change into a hat composed of the
-ServerName-URI (e.g. "www.example.com-/app/some.cgi").  If that hat
-is not found, it will fall back to attempting to use the hat named
-by the URI (e.g. "/app/some.cgi"). If that hat is not found, it will
-fall back to attempting to use the hat DEFAULT_URI; if that also does
-not exist, it will fall back to using the global Apache profile. Most
-static web pages can simply make use of the DEFAULT_URI hat.
+cause mod_apparmor to attempt to change into a hat named by the URI
+(e.g. /app/some.cgi). If no such hat is found, it will fall back to
+attempting to use the hat DEFAULT_URI; if that also does not exist,
+it will fall back to using the global Apache profile. Most static web
+pages can simply make use of the DEFAULT_URI hat.
 
 Additionally, before any requests come in to Apache, mod_apparmor
 will attempt to change hat into the HANDLING_UNTRUSTED_INPUT hat.
@@ -64,8 +60,8 @@ provides the AAHatName and AADefaultHatName Apache configuration options.
 =item B<AAHatName>
 
 AAHatName allows you to specify a hat to be used for a given Apache
-E<lt>DirectoryE<gt>, E<lt>DirectoryMatchE<gt>, E<lt>LocationE<gt> or
-E<lt>LocationMatchE<gt> directive (see the Apache documentation for more
+E<lt>DirectoryE<gt>, E<lt>DirectoryMatch>, E<lt>LocationE<gt> or
+E<lt>LocationMatchE<gt> directive (see the Apache documenation for more
 details). Note that mod_apparmor behavior can become confused if
 E<lt>Directory*E<gt> and E<lt>Location*E<gt> directives are intermingled
 and it is recommended to use one type of directive. If the hat specified by
@@ -76,11 +72,11 @@ behavior described above.
 
 AADefaultHatName allows you to specify a default hat to be used for
 virtual hosts and other Apache server directives, so that you can have
-different defaults for different virtual hosts. This can be overridden
-by the AAHatName directive and is checked for only if there isn't
-a matching AAHatName. The default value of AADefaultHatName is the
-ServerName for the server/vhost configuration.  If the AADefaultHatName
-hat does not exist, then it falls back to the behavior described above.
+different defaults for different virtual hosts. This can be overridden by
+the AAHatName directive and is checked for only if there isn't a matching
+AAHatName or hat named by the URI. If the AADefaultHatName hat does not
+exist, it falls back to the DEFAULT_URI hat if it exists (as described
+above).
 
 =back
 
@@ -95,35 +91,20 @@ On each URI request, mod_apparmor will first aa_change_hat(2) into
 Then, after performing the initial parsing of the request, mod_apparmor
 will:
 
-=over 4
+=over 2
 
-=item 1
-
-try to aa_change_hat(2) into a matching AAHatName hat if it exists and
+1. try to aa_change_hat(2) into a matching AAHatName hat if it exists and
 applies, otherwise it will
 
-=item 2
+2. try to aa_change_hat(2) into the URI itself, otherwise it will
 
-try to aa_change_hat(2) into an AADefaultHatName hat, either the
-ServerName (the default) or the configuration value specified by the
-AADefaultHatName directive, for the server/vhost, otherwise it will
+3. try to aa_change_hat(2) into an AADefaultHatName hat if it has been defined
+for the server/vhost, otherwise it will
 
-=item 3
-
-try to aa_change_hat(2) into the ServerName-URI, otherwise it will
-
-=item 4
-
-try to aa_change_hat(2) into the URI itself, otherwise it will
-
-=item 5
-
-try to aa_change_hat(2) into the DEFAULT_URI hat, if it exists, otherwise it
+4. try to aa_change_hat(2) into the DEFAULT_URI hat, if it exists, otherwise it
 will
 
-=item 6
-
-fall back to the global Apache policy
+5. fall back to the global Apache policy
 
 =back
 
@@ -131,15 +112,14 @@ fall back to the global Apache policy
 
 mod_apparmor() currently only supports apache2, and has only been tested
 with the prefork MPM configuration -- threaded configurations of Apache
-may not work correctly. For Apache 2.4 users, you should enable the mpm_prefork
-module.
+may not work correctly.
 
 There are likely other bugs lurking about; if you find any, please report
-them at L<https://gitlab.com/apparmor/apparmor/-/issues>.
+them at L<http://https://bugs.launchpad.net/apparmor/+filebug>.
 
 =head1 SEE ALSO
 
-apparmor(7), apparmor_parser(8), aa_change_hat(2) and
-L<https://wiki.apparmor.net>.
+apparmor(7), subdomain.conf(5), apparmor_parser(8), aa_change_hat(2) and
+L<http://wiki.apparmor.net>.
 
 =cut

changehat/pam_apparmor/Makefile

@@ -1,6 +1,5 @@
 # ----------------------------------------------------------------------
 #    Copyright (c) 1999, 2004, 2005 NOVELL (All rights reserved)
-#    Copyright (c) 2016 Canonical, Ltd.
 #
 #    This program is free software; you can redistribute it and/or
 #    modify it under the terms of version 2 of the GNU General Public
@@ -17,57 +16,22 @@
 NAME=pam_apparmor
 all:
 COMMONDIR=../../common/
+MAKE_RULES=common/Make.rules
 
-include $(COMMONDIR)/Make.rules
+include ${MAKE_RULES}
 
-ifdef USE_SYSTEM
-  LIBAPPARMOR = $(shell if pkg-config --exists libapparmor ; then \
-                                pkg-config --silence-errors --libs libapparmor ; \
-                        elif ldconfig -p | grep -q libapparmor\.so$$ ; then \
-                                echo -lapparmor ; \
-                        fi )
-  ifeq ($(strip $(LIBAPPARMOR)),)
-    ERROR_MESSAGE = $(error ${nl}\
-************************************************************************${nl}\
-Unable to find libapparmor installed on this system; either${nl}\
-install libapparmor devel packages, set the LIBAPPARMOR variable${nl}\
-manually, or build against in-tree libapparmor.${nl}\
-************************************************************************${nl})
-  endif
-  LIBAPPARMOR_INCLUDE =
-  AA_LDLIBS = $(LIBAPPARMOR)
-  AA_LINK_FLAGS =
-else
-  LIBAPPARMOR_SRC := ../../libraries/libapparmor/
-  LIBAPPARMOR_INCLUDE_PATH = $(LIBAPPARMOR_SRC)/include
-  LIBAPPARMOR_PATH := $(LIBAPPARMOR_SRC)/src/.libs/
-    ifeq ($(realpath $(LIBAPPARMOR_PATH)/libapparmor.a),)
-        ERROR_MESSAGE = $(error ${nl}\
-************************************************************************${nl}\
-$(LIBAPPARMOR_PATH)/libapparmor.a is missing; either build against${nl}\
-the in-tree libapparmor by building it first and then trying again${nl}\
-(see the top-level README for help) or build against the system${nl}\
-libapparmor by adding USE_SYSTEM=1 to your make command.${nl}\
-************************************************************************${nl})
-    endif
-  LIBAPPARMOR_INCLUDE = -I$(LIBAPPARMOR_INCLUDE_PATH)
-  AA_LINK_FLAGS = -L$(LIBAPPARMOR_PATH)
-  AA_LDLIBS = -lapparmor
+COMMONDIR_EXISTS=$(strip $(shell [ -d ${COMMONDIR} ] && echo true))
+ifeq ($(COMMONDIR_EXISTS), true)
+common/Make.rules: $(COMMONDIR)/Make.rules
+	ln -sf $(COMMONDIR) .
 endif
-EXTRA_CFLAGS=$(CFLAGS) $(CPPFLAGS) -fPIC -shared -Wall $(EXTRA_WARNINGS) $(LIBAPPARMOR_INCLUDE)
-LINK_FLAGS=-Xlinker -x $(AA_LINK_FLAGS) $(LDFLAGS)
-LIBS=-lpam $(AA_LDLIBS)
+
+EXTRA_CFLAGS=$(CFLAGS) -fPIC -shared -Wall -I../../libraries/libapparmor/src/
+LINK_FLAGS=-Xlinker -x -L../../libraries/libapparmor/src/.libs
+LIBS=-lpam -lapparmor
 OBJECTS=${NAME}.o get_options.o
 
-.PHONY: libapparmor_check
-.SILENT: libapparmor_check
-libapparmor_check: ; $(ERROR_MESSAGE)
-
-all: libapparmor_check $(NAME).so docs
-
-.PHONY: docs
-# docs: we should have some
-docs:
+all: $(NAME).so
 
 $(NAME).so: ${OBJECTS}
 	$(CC) $(EXTRA_CFLAGS) $(LINK_FLAGS) -o $@ ${OBJECTS} $(LIBS)
@@ -82,8 +46,10 @@ SECDIR ?= ${DESTDIR}/lib/security
 .PHONY: install
 install: $(NAME).so
 	install -m 755 -d $(SECDIR)
-	install -m 755 $(NAME).so $(SECDIR)/
+	install -m 555 $(NAME).so $(SECDIR)/
 	
 .PHONY: clean
-clean:
+clean: ${MAKE_RULES}
 	rm -f core core.* *.so *.o *.s *.a *~
+	rm -f ${NAME}-*.tar.gz Make.rules
+

changehat/pam_apparmor/README

@@ -67,10 +67,10 @@ to syslog.
 References
 ----------
 Project webpage:
-https://apparmor.net/
+http://developer.novell.com/wiki/index.php/Novell_AppArmor
 
 To provide feedback or ask questions please contact the
-apparmor@lists.ubuntu.com mail list. This is the development list
+apparmor-dev@forge.novell.com mail list. This is the development list
 for the AppArmor team.
 
 See also: change_hat(3), and the Linux-PAM online documentation at

changehat/pam_apparmor/pam_apparmor.c

@@ -27,7 +27,7 @@
 #include <grp.h>
 #include <syslog.h>
 #include <errno.h>
-#include <sys/apparmor.h>
+#include <apparmor.h>
 #include <security/pam_ext.h>
 #include <security/pam_modutil.h>
 
@@ -45,10 +45,6 @@
 
 int debug_flag = 0;
 
-#ifndef unused_
-#define unused_ __attribute__ ((unused))
-#endif
-
 static struct config default_config = {
 	.hat_type[0] = eGroupname,
 	.hat_type[1] = eDefault,
@@ -58,14 +54,14 @@ static struct config default_config = {
 /* --- session management functions (only) --- */
 
 PAM_EXTERN int
-pam_sm_close_session (unused_ pam_handle_t *pamh, unused_ int flags,
-		      unused_ int argc, unused_ const char **argv)
+pam_sm_close_session (pam_handle_t *pamh, int flags,
+		      int argc, const char **argv)
 {
 	return PAM_IGNORE;
 }
 
 PAM_EXTERN
-int pam_sm_open_session(pam_handle_t *pamh, unused_ int flags,
+int pam_sm_open_session(pam_handle_t *pamh, int flags,
 			int argc, const char **argv)
 {
 	int fd, retval, pam_retval = PAM_SUCCESS;
@@ -115,7 +111,6 @@ int pam_sm_open_session(pam_handle_t *pamh, unused_ int flags,
 					  sizeof(magic_token));
 		if (retval < 0) {
 			pam_syslog(pamh, LOG_ERR, "Can't read from /dev/urandom\n");
-			close(fd);
 			return PAM_PERM_DENIED;
 		}
 	} while ((magic_token == 0) || (retval != sizeof(magic_token)));

changehat/pam_apparmor/pam_apparmor.spec.in

@@ -0,0 +1,83 @@
+#
+# spec file for package pam_apparmor (Version 2)
+#
+# Copyright (c) 2005 SUSE LINUX Products GmbH, Nuernberg, Germany.
+# This file and all modifications and additions to the pristine
+# package are under the same license as the package itself.
+#
+# Please submit bugfixes or comments via http://www.suse.de/feedback/
+#
+
+# norootforbuild
+
+Name:         pam_apparmor
+License:      GPL
+Group:        Productivity/Security
+Autoreqprov:  on
+Version:      @@immunix_version@@
+Release:      @@repo_version@@
+Summary:      Pam module to add AppArmor change_hat functionality
+URL:          http://forge.novell.com/modules/xfmod/project/?apparmor
+Source:       pam_apparmor-%{version}-@@repo_version@@.tar.gz
+BuildRoot:    %{_tmppath}/%{name}-%{version}-build
+BuildRequires: pam-devel
+Requires:     pam
+Prereq:       pam
+
+%if %{?suse_version:1}0
+%if 0%{?suse_version} < 1030
+BuildRequires: libapparmor
+%else
+BuildRequires: libapparmor-devel
+%endif
+%else
+BuildRequires: libapparmor-devel
+%endif
+
+%description
+The pam_apparmor module provides the means for any pam applications that
+call pam_open_session() to automatically perform an AppArmor change_hat
+operation in order to switch to a user-specific security policy.
+
+
+Authors:
+--------
+    Jesse Michael jmichael@suse.de
+
+%prep
+%setup -q
+
+%build
+make CFLAGS="${RPM_OPT_FLAGS}"
+
+%install
+[ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT
+make install DESTDIR=${RPM_BUILD_ROOT} SECDIR=${RPM_BUILD_ROOT}/%{_lib}/security
+
+%clean
+[ "${RPM_BUILD_ROOT}" != "/" ] && rm -rf ${RPM_BUILD_ROOT}
+
+%files
+%defattr(444,root,root,755)
+%doc README COPYING
+%attr(555,root,root) /%{_lib}/security/pam_apparmor.so
+
+%changelog -n pam_apparmor
+* Tue Oct 31 2006 Jesse Michael <jmichael@suse.de>
+- Add debug option
+* Tue Oct 31 2006 Steve Beattie <sbeattie@suse.de>
+- Add configuration options to order attempted hat changes
+* Wed Oct 25 2006 Steve Beattie <sbeattie@suse.de>
+- remove auto-editing of pam's common-session
+- honor RPM's CFLAGS when building
+- add license (same as Linux PAM package).
+* Thu Sep 14 2006 Jesse Michael <jmichael@suse.de>
+- header comment was incorrect
+- use pam_get_user() instead of pam_get_item()
+- fix read from urandom if 0
+* Fri Jan 13 2006 Steve Beattie <sbeattie@suse.de>
+- Add svn repo number to tarball
+* Fri Jan 13 2006 Jesse Michael <jmichael@suse.de>
+- Make magic tokens harder to guess by pulling them from /dev/urandom
+* Wed Dec 21 2005 - jmichael@suse.de
+- initial

changehat/tomcat_apparmor/tomcat_5_0/Makefile

@@ -17,7 +17,13 @@ NAME 		= tomcat_apparmor
 all:
 COMMONDIR=../../../common/
 
-include $(COMMONDIR)/Make.rules
+include common/Make.rules
+
+COMMONDIR_EXISTS=$(strip $(shell [ -d ${COMMONDIR} ] && echo true))
+ifeq ($(COMMONDIR_EXISTS), true)
+common/Make.rules: $(COMMONDIR)/Make.rules
+	ln -sf $(COMMONDIR) .
+endif
 
 LIB		= lib
 CATALINA_HOME 	= /usr/share/tomcat5
@@ -28,6 +34,7 @@ all:
 
 clean:
 	ant clean
+	rm -f tomcat_apparmor.spec ${NAME}-*.tar.gz Make.rules
 
-install:
-	 ant  -Dversion=$(VERSION) -Drelease=$(MAN_RELEASE) -Dcatalina_home=${CATALINA_HOME} -Dinstall_lib=${LIB} install_jar install_jni
+install: $(SPECFILE)
+	 ant  -Dversion=$(VERSION) -Drelease=$(RELEASE) -Dcatalina_home=${CATALINA_HOME} -Dinstall_lib=${LIB} install_jar install_jni

changehat/tomcat_apparmor/tomcat_5_0/README.tomcat_apparmor

@@ -66,8 +66,8 @@ under src/jni_src.
   cp dist/libJNIChangeHat.so /usr/lib
 
   [Note: you must ensure that the target directory is passed to tomcat via the
-   java.library.path property. This can be accomplished by setting the JAVA_OPTS
-   environment variable, export JAVA_OPTS=-Djava.library.path, or set via the
+   java.library.path propert. This can be accomplished by setting the JAVA_OPTS
+   enviroment variable, export JAVA_OPTS=-Djava.library.path, or set via the 
    env variable LD_LIBRARY_PATH to include this directory so that tomcat can 
    find this library at startup]
 
@@ -108,13 +108,13 @@ under src/jni_src.
 Once the installation steps above have been started you are ready to begin 
 creating a profile for your application. The profile creation tool genprof will
 guide you through generating a profile and its support for change_hat will 
-prompt you create discrete hats as requested by the changeHatValve during
+prompt you create discrete hats as requested byt the changeHatValve during 
 tomcat execution.
 
   1. Create a basic profile for the tomcat server.
 
      - Run the command "genprof PATH_TO_CATALINA.SH"
-     - In a separate window start tomcat and then stop tomcat
+     - In a seperate window start tomcat and then stop tomcat
      - In the genprof window press "S" to scan for events
      - Answer the questions about the initial profile for tomcat
 
@@ -124,7 +124,7 @@ tomcat execution.
      - Stop the tomcat server
      - Deploy your WAR file or equivalent files under the container. 
      - execute "genprof PATH_TO_CATALINA.SH"
-     - In a separate window start tomcat and then exercise your web application
+     - In a seperate window start tomcat and then exercise your web application
      - In the genprof window press "S" to scan for events
        During the prompting you will be asked questions similar to:
   
@@ -180,7 +180,7 @@ all subsequent resource requests will be mediated in this hew hat (or security
 context).        
 If you choose to use the default hat: genprof will mediate all resource 
 requests in the default hat for the duration of processing this request.
-When the request processing is complete the valve will change_hat back to the
+When the request processng is complete the valve will change_hat back to the 
 parent context.
 
 
@@ -188,9 +188,10 @@ parent context.
 8. Feedback/Resources
    -----------------
 
-Project webpage:
-https://apparmor.net/
+To provide feedback or ask questions please contact the 
+apparmor-dev@forge.novell.com mail list. This is the development list for the 
+AppArmor team.
+
+
+
 
-To provide feedback or ask questions please contact the
-apparmor@lists.ubuntu.com mail list. This is the development list
-for the AppArmor team.

changehat/tomcat_apparmor/tomcat_5_0/src/jni_src/JNIChangeHat.c

@@ -13,7 +13,7 @@
 
 #include "jni.h"
 #include <errno.h>
-#include <sys/apparmor.h>
+#include "sys/apparmor.h"
 #include "com_novell_apparmor_JNIChangeHat.h"
 
 /* c intermediate lib call for Java -> JNI -> c library execution of the change_hat call */

changehat/tomcat_apparmor/tomcat_5_0/tomcat_apparmor.spec.in

@@ -0,0 +1,85 @@
+# ----------------------------------------------------------------------
+#    Copyright (c) 2006 NOVELL (All rights reserved)
+#
+#    This program is free software; you can redistribute it and/or
+#    modify it under the terms of version 2 of the GNU General Public
+#    License published by the Free Software Foundation.
+#
+#    This program is distributed in the hope that it will be useful,
+#    but WITHOUT ANY WARRANTY; without even the implied warranty of
+#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#    GNU General Public License for more details.
+#
+#    You should have received a copy of the GNU General Public License
+#    along with this program; if not, contact Novell, Inc.
+# ----------------------------------------------------------------------
+# norootforbuild
+
+# Check first to see if distro is already defined.
+
+%if ! %{?distro:1}0
+  %define distro suse
+%endif
+
+%if %{distro} == "suse"
+%define CATALINA_HOME /usr/share/tomcat5
+%endif 
+%define APPARMOR_DOC_DIR /usr/share/doc/packages/apparmor-docs/
+%define JNI_SO libJNIChangeHat.so
+%define JAR_FILE changeHatValve.jar
+
+
+Summary: Tomcat 5 plugin for AppArmor change_hat
+Name: tomcat_apparmor
+Version: @@immunix_version@@
+Release: @@repo_version@@
+Group:  System/Libraries
+Source0: %{name}-%{version}-@@repo_version@@.tar.gz
+License: LGPL
+BuildRoot: %{?_tmppath:}%{!?_tmppath:/var/tmp}/%{name}-%{version}-build
+Url: http://developer.novell.com/wiki/index.php/Novell_AppArmor
+Prereq: tomcat5, servletapi5, libapparmor
+BuildRequires: tomcat5, servletapi5 ant, java, libapparmor, java2-devel-packages, apparmor-docs
+Provides: tomcat_apparmor
+
+%description
+tomcat_apparmor - is a plugin for Apache Tomcat version 5.x that provides
+support for AppArmor change_hat for creating AppArmor containers that are
+bound to discrete elements of processing within the Tomcat servlet 
+container. The AppArmor containers, or "hats", can be created for invidual
+URL processing or per servlet. 
+
+%prep
+
+%setup -q 
+
+%build
+[ "${RPM_BUILD_ROOT}" != "/" ] && rm -rf ${RPM_BUILD_ROOT}
+
+ant -Ddist=${RPM_BUILD_DIR}/%{name}-%{version} -Dtarget=1.4 jar jni_so
+
+%install
+ant -Ddist=${RPM_BUILD_DIR}/%{name}-%{version} -Dversion=%{version} -Drelease=%{release} -Dcatalina_home=%{CATALINA_HOME} -Dinstall_root=${RPM_BUILD_ROOT} -Dinstall_lib=%{_lib} install_jar install_jni
+
+mkdir -p ${RPM_BUILD_ROOT}%{APPARMOR_DOC_DIR}
+install ${RPM_BUILD_DIR}/%{name}-%{version}/README.tomcat_apparmor  ${RPM_BUILD_ROOT}%{APPARMOR_DOC_DIR}
+
+%clean 
+[ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT
+
+%files
+%defattr(-,root,root)
+%{CATALINA_HOME}/server/lib/%{JAR_FILE}
+/%{_lib}/lib*
+/%{_libdir}/lib*
+%{APPARMOR_DOC_DIR}/README.tomcat_apparmor
+
+%post
+ldconfig 
+
+%postun
+ldconfig 
+
+%changelog
+* Mon Oct 9 2006 - dreynolds@suse.de 
+- Initial package creation.

changehat/tomcat_apparmor/tomcat_5_5/Makefile

@@ -17,7 +17,13 @@ NAME 		= tomcat_apparmor
 all:
 COMMONDIR=../../../common/
 
-include $(COMMONDIR)/Make.rules
+include common/Make.rules
+
+COMMONDIR_EXISTS=$(strip $(shell [ -d ${COMMONDIR} ] && echo true))
+ifeq ($(COMMONDIR_EXISTS), true)
+common/Make.rules: $(COMMONDIR)/Make.rules
+	ln -sf $(COMMONDIR) .
+endif
 
 LIB		= lib
 CATALINA_HOME 	= /usr/share/tomcat55
@@ -28,6 +34,7 @@ all:
 
 clean:
 	ant clean
+	rm -f tomcat_apparmor.spec ${NAME}-*.tar.gz Make.rules
 
-install:
-	 ant  -Dversion=$(VERSION) -Drelease=$(MAN_RELEASE) -Dcatalina_home=${CATALINA_HOME} -Dinstall_lib=${LIB} install_jar install_jni
+install: $(SPECFILE)
+	 ant  -Dversion=$(VERSION) -Drelease=$(RELEASE) -Dcatalina_home=${CATALINA_HOME} -Dinstall_lib=${LIB} install_jar install_jni

changehat/tomcat_apparmor/tomcat_5_5/README.tomcat_apparmor

@@ -66,8 +66,8 @@ under src/jni_src.
   cp dist/libJNIChangeHat.so /usr/lib
 
   [Note: you must ensure that the target directory is passed to tomcat via the
-   java.library.path property. This can be accomplished by setting the JAVA_OPTS
-   environment variable, export JAVA_OPTS=-Djava.library.path, or set via the
+   java.library.path propert. This can be accomplished by setting the JAVA_OPTS
+   enviroment variable, export JAVA_OPTS=-Djava.library.path, or set via the 
    env variable LD_LIBRARY_PATH to include this directory so that tomcat can 
    find this library at startup]
 
@@ -108,13 +108,13 @@ under src/jni_src.
 Once the installation steps above have been started you are ready to begin 
 creating a profile for your application. The profile creation tool genprof will
 guide you through generating a profile and its support for change_hat will 
-prompt you create discrete hats as requested by the changeHatValve during
+prompt you create discrete hats as requested byt the changeHatValve during 
 tomcat execution.
 
   1. Create a basic profile for the tomcat server.
 
      - Run the command "genprof PATH_TO_CATALINA.SH"
-     - In a separate window start tomcat and then stop tomcat
+     - In a seperate window start tomcat and then stop tomcat
      - In the genprof window press "S" to scan for events
      - Answer the questions about the initial profile for tomcat
 
@@ -124,7 +124,7 @@ tomcat execution.
      - Stop the tomcat server
      - Deploy your WAR file or equivalent files under the container. 
      - execute "genprof PATH_TO_CATALINA.SH"
-     - In a separate window start tomcat and then exercise your web application
+     - In a seperate window start tomcat and then exercise your web application
      - In the genprof window press "S" to scan for events
        During the prompting you will be asked questions similar to:
   
@@ -180,7 +180,7 @@ all subsequent resource requests will be mediated in this hew hat (or security
 context).        
 If you choose to use the default hat: genprof will mediate all resource 
 requests in the default hat for the duration of processing this request.
-When the request processing is complete the valve will change_hat back to the
+When the request processng is complete the valve will change_hat back to the 
 parent context.
 
 
@@ -188,9 +188,10 @@ parent context.
 8. Feedback/Resources
    -----------------
 
-Project webpage:
-https://apparmor.net/
+To provide feedback or ask questions please contact the 
+apparmor-dev@forge.novell.com mail list. This is the development list for the 
+AppArmor team.
+
+
+
 
-To provide feedback or ask questions please contact the
-apparmor@lists.ubuntu.com mail list. This is the development list
-for the AppArmor team.

changehat/tomcat_apparmor/tomcat_5_5/src/jni_src/JNIChangeHat.c

@@ -13,7 +13,7 @@
 
 #include "jni.h"
 #include <errno.h>
-#include <sys/apparmor.h>
+#include <apparmor.h>
 #include "com_novell_apparmor_JNIChangeHat.h"
 
 /* c intermediate lib call for Java -> JNI -> c library execution of the change_hat call */

changehat/tomcat_apparmor/tomcat_5_5/tomcat_apparmor.spec.in

@@ -0,0 +1,86 @@
+# ----------------------------------------------------------------------
+#    Copyright (c) 2006 NOVELL (All rights reserved)
+#
+#    This program is free software; you can redistribute it and/or
+#    modify it under the terms of version 2 of the GNU General Public
+#    License published by the Free Software Foundation.
+#
+#    This program is distributed in the hope that it will be useful,
+#    but WITHOUT ANY WARRANTY; without even the implied warranty of
+#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#    GNU General Public License for more details.
+#
+#    You should have received a copy of the GNU General Public License
+#    along with this program; if not, contact Novell, Inc.
+# ----------------------------------------------------------------------
+# norootforbuild
+
+# Check first to see if distro is already defined.
+
+%if ! %{?distro:1}0
+  %define distro suse
+%endif
+
+%if %{distro} == "suse"
+%define CATALINA_HOME /usr/share/tomcat55
+%endif 
+%define APPARMOR_DOC_DIR /usr/share/doc/packages/apparmor-docs/
+%define JNI_SO libJNIChangeHat.so
+%define JAR_FILE changeHatValve.jar
+
+
+Summary: Tomcat 5 plugin for AppArmor change_hat
+Name: tomcat_apparmor
+Version: @@immunix_version@@
+Release: @@repo_version@@
+Group:  System/Libraries
+Source0: %{name}-%{version}-@@repo_version@@.tar.gz
+License: LGPL
+BuildRoot: %{?_tmppath:}%{!?_tmppath:/var/tmp}/%{name}-%{version}-build
+Url: http://developer.novell.com/wiki/index.php/Novell_AppArmor
+Prereq: tomcat55, servletapi5
+BuildRequires: tomcat55, servletapi5, ant, java, libapparmor-devel, java2-devel-packages, apparmor-docs
+
+%description
+tomcat_apparmor - is a plugin for Apache Tomcat version 5.x that provides
+support for AppArmor change_hat for creating AppArmor containers that are
+bound to discrete elements of processing within the Tomcat servlet 
+container. The AppArmor containers, or "hats", can be created for invidual
+URL processing or per servlet. 
+
+%prep
+
+%setup -q 
+
+%build
+[ "${RPM_BUILD_ROOT}" != "/" ] && rm -rf ${RPM_BUILD_ROOT}
+
+ant -Dinstall_lib=%{_lib} -Dcatalina_home=%{CATALINA_HOME} -Ddist=${RPM_BUILD_DIR}/%{name}-%{version} -Dtarget=1.4 jar jni_so
+
+%install
+ant -Ddist=${RPM_BUILD_DIR}/%{name}-%{version} -Dversion=%{version} -Drelease=%{release} -Dcatalina_home=%{CATALINA_HOME} -Dinstall_root=${RPM_BUILD_ROOT} -Dinstall_lib=%{_lib} install_jar install_jni
+
+mkdir -p ${RPM_BUILD_ROOT}%{APPARMOR_DOC_DIR}
+install ${RPM_BUILD_DIR}/%{name}-%{version}/README.tomcat_apparmor  ${RPM_BUILD_ROOT}%{APPARMOR_DOC_DIR}
+
+%clean 
+[ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT
+
+%files
+%defattr(-,root,root)
+%{CATALINA_HOME}/server/lib/%{JAR_FILE}
+/%{_lib}/lib*
+/%{_libdir}/lib*
+doc %attr(0644,root,root) %{APPARMOR_DOC_DIR}/README.tomcat_apparmor
+
+%post
+ldconfig 
+
+%postun
+ldconfig 
+
+%changelog
+* Mon Jul 20 2007 - sbeattie@suse.de
+- Convert builddep on libapparmor to libapparmor-devel
+* Mon Oct 9 2006 - dreynolds@suse.de 
+- Initial package creation.

common/Make-po.rules

@@ -1,7 +1,7 @@
 # ------------------------------------------------------------------
 #
 # Copyright (c) 1999-2008 NOVELL (All rights reserved)
-# Copyright 2009-2015 Canonical Ltd.
+# Copyright 2009-2010 Canonical Ltd.
 #
 # This program is free software; you can redistribute it and/or
 # modify it under the terms of version 2 of the GNU General Public 
@@ -21,14 +21,13 @@
 # exist
 LOCALEDIR=/usr/share/locale
 
-XGETTEXT_ARGS=--copyright-holder="Canonical Ltd" --msgid-bugs-address=apparmor@lists.ubuntu.com -d ${NAME}
+XGETTEXT_ARGS=--copyright-holder="NOVELL, Inc." --msgid-bugs-address=apparmor@lists.ubuntu.com -d ${NAME}
 
 # When making the .pot file, it's expected that the parent Makefile will
 # pass in the list of sources in the SOURCES variable
 PARENT_SOURCES=$(foreach source, ${SOURCES}, ../${source})
 
-# Can override by passing LANGS=whatever here
-LANGS?=$(patsubst %.po, %, $(wildcard *.po))
+LANGS=$(patsubst %.po, %, $(wildcard *.po))
 TARGET_MOS=$(foreach lang, $(filter-out $(DISABLED_LANGS),$(LANGS)), ${lang}.mo)
 
 .PHONY: all

common/Make.rules

@@ -1,7 +1,7 @@
 # ------------------------------------------------------------------
 #
 #    Copyright (C) 2002-2005 Novell/SUSE
-#    Copyright (C) 2010-2015 Canonical, Ltd.
+#    Copyright (C) 2010 Canonical, Ltd.
 #
 #    This program is free software; you can redistribute it and/or
 #    modify it under the terms of version 2 of the GNU General Public 
@@ -15,76 +15,139 @@
 #    You should have received a copy of the GNU General Public License
 #    along with this program; if not, contact Novell, Inc.
 # ------------------------------------------------------------------
-# Make.rules - common make targets and variables for building AppArmor
+# Make.rules - common make targets and variables for building the SHASS
+# product.
 #
 # NOTES:
-#   Before including this file in your Makefile, you should
-#   - define COMMONDIR (the location of the common/ directory)
-#   - define the default rule (usually 'all:'). (Note: you can redefine
-#     it later in your Makefile)
-
-.PHONY: common_Make.rules_is_a_bad_target
-common_Make.rules_is_a_bad_target:
-	@echo "*** default target in common/Make.rules hit - either you did something strange, or something is broken... ***"
-	exit 1
+#   - must define the package NAME before including this file.
+#   - After checking in to cvs, you'll need to delele the hardlinked
+#     Make.rules files that already exist in the individual application
+#     directories
 
 DISTRIBUTION=AppArmor
-VERSION=$(shell cat $(COMMONDIR)/Version)
+VERSION=$(shell cat common/Version)
 
-# Convenience functions
-pathsearch = $(firstword $(wildcard $(addsuffix /$(1),$(subst :, ,$(PATH)))))
-map = $(foreach a,$(2),$(call $(1),$(a)))
+# OVERRIDABLE variables
+# Set these variables before including Make.rules to change its behavior
+#   SPECFILE - for packages that have a non-standard specfile name
+#   EXTERNAL_PACKAGE - for packages that have upstream versions that
+#   	we're locally modifying (e.g. imnxcerttool/gnutls).
+#
+# use 'make BUILDIR=/some/where/else/' to override the /usr/src/redhat
+# location -- it *should* pick out the right thing to do based on the
+# .rpmmacros file, but you can still use BUILDDIR to override that.
+TESTBUILDDIR=$(shell [ -f ${HOME}/.rpmmacros ] && awk '/^%_topdir/ {print $$2}' ${HOME}/.rpmmacros)
+ifndef BUILDDIR
+BUILDDIR=$(shell if [ -d "${TESTBUILDDIR}" ] ; then \
+		    echo ${TESTBUILDDIR} | sed "s^/$$^^" ; \
+		  elif [ -d "/usr/src/redhat" ] ; then \
+		    echo "/usr/src/redhat" ; \
+		  elif [ -d "/usr/src/packages" ] ; then \
+		    echo "/usr/src/packages" ; \
+		  else \
+		    echo "/tmp/${NAME}"  ; \
+		  fi ;)
+endif
+ifndef DISTRO
+DISTRO=$(shell if [ -f /etc/slackware-version ] ; then \
+		  echo slackware ; \
+	       elif [ -f /etc/debian_version ] ; then \
+	       	  echo debian ;\
+	       elif which rpm > /dev/null ; then \
+	         if [ "$(rpm --eval '0%{?suse_version}')" != "0" ] ; then \
+	             echo suse ;\
+	         elif [ "$(rpm --eval '%{_host_vendor}')" = redhat ] ; then \
+	            echo rhel4 ;\
+	         elif [ "$(rpm --eval '0%{?fedora}')" != "0" ] ; then \
+	            echo rhel4 ;\
+	         else \
+	            echo unknown ;\
+	         fi ;\
+	       else \
+	          echo unknown ;\
+	       fi)
+endif
+RPMARG=--define "_topdir $(BUILDDIR:/=)" \
+        --define "vendor NOVELL, Inc." \
+	--define "distribution ${DISTRIBUTION}" \
+	--define "debug_package %{nil}" \
+	--define "immunix_version ${VERSION}" \
+	$(shell [ -d ${BUILDDIR}/BUILDROOT ] && echo --define \"buildroot $(BUILDDIR:/=)/BUILDROOT\") \
+	$(shell [ -n "${DISTRO}" ] && echo --define \"distro ${DISTRO}\")
 
-AWK:=$(shell which awk)
-ifndef AWK
-$(error awk utility required for build but not available)
+REPO_VERSION_CMD=([ -x /usr/bin/bzr ] && /usr/bin/bzr version-info . 2> /dev/null || awk '{ print "revno: "$2 }' common/.stamp_rev) | awk '/^revno:/ { print $2 }'
+
+ifdef EXTERNAL_PACKAGE
+RPMARG+=--define "_sourcedir $(shell pwd)"
 endif
 
-define nl
+ifndef SPECFILE
+SPECFILE        = $(NAME).spec
+endif
+RELEASE_DIR	= $(NAME)-$(VERSION)
+TAR		= /bin/tar czvp -h --exclude .svn --exclude .bzr --exclude .bzrignore --exclude ${RELEASE_DIR}/${RELEASE_DIR} $(shell test -f ${NAME}.exclude && echo "-X ${NAME}.exclude")
+LDCONFIG	= /sbin/ldconfig
 
+RPMSUBDIRS=SOURCES SPECS BUILD BUILDROOT SRPMS RPMS/i386 RPMS/i586 \
+        RPMS/i686 RPMS/athlon RPMS/noarch RPMS/x86_64
+BUILDRPMSUBDIRS=$(foreach subdir, $(RPMSUBDIRS), $(BUILDDIR:/=)/$(subdir))
 
-endef
+ifdef EXTERNAL_PACKAGE
+.PHONY: rpm
+rpm: clean $(BUILDRPMSUBDIRS)
+	rpmbuild -ba ${RPMARG} ${SPECFILE}
 
-REPO_VERSION_CMD=[ -x /usr/bin/git ] && /usr/bin/git describe --tags --long --abbrev=16 --match 'v*' 2> /dev/null || awk '{ print $2 }' common/.stamp_rev
+else
+.PHONY: rpm
+rpm: clean $(BUILDRPMSUBDIRS)
+	__REPO_VERSION=`$(value REPO_VERSION_CMD)` ; \
+	__TARBALL=$(NAME)-$(VERSION)-$${__REPO_VERSION}.tar.gz ; \
+	make $${__TARBALL} ; \
+	cp $${__TARBALL} $(BUILDDIR)/SOURCES/
+	cp ${SPECFILE} $(BUILDDIR)/SPECS/
+	rpmbuild -ba ${RPMARG} ${SPECFILE}
 
-ifndef PYTHON_VERSIONS
-PYTHON_VERSIONS = $(call map, pathsearch, python3)
+.PHONY: ${SPECFILE}
+${SPECFILE}: ${SPECFILE}.in
+	__REPO_VERSION=`$(value REPO_VERSION_CMD)` ; \
+	sed -e "s/@@immunix_version@@/${VERSION}/g" \
+	    -e "s/@@repo_version@@/$${__REPO_VERSION}/g" $< > $@
+
+%.tar.gz: clean ${SPECFILE}
+	-rm -rf $(RELEASE_DIR)
+	mkdir $(RELEASE_DIR)
+	$(TAR) --exclude $@ . | tar xz -C $(RELEASE_DIR)
+	$(TAR) --exclude $@ -f $@ $(RELEASE_DIR)
+	rm -rf $(RELEASE_DIR)
+
+ifndef OVERRIDE_TARBALL
+.PHONY: tarball
+tarball: clean $(TARBALL)
 endif
 
-ifndef PYTHON
-PYTHON = $(firstword ${PYTHON_VERSIONS})
 endif
 
-#Helper function to be used with $(call pyalldo, run_test_with_all.py)
-pyalldo=set -e; $(foreach py, $(PYTHON_VERSIONS), $(py) $(1);)
-
-# Common set of compiler warnings
-_EXTRA_WARNINGS = -Wall -Wsign-compare -Wmissing-field-initializers -Wformat -Wformat-security -Wunused-parameter -Wimplicit-fallthrough
-EXTRA_WARNINGS := $(shell for warning in ${_EXTRA_WARNINGS} ; do \
-			if ${CC} $${warning} -S -o /dev/null -xc /dev/null >/dev/null 2>&1; then \
-				echo "$${warning}"; \
-			else \
-				echo "***" >&2 ; \
-				echo "WARNING: unable to use $${warning} with ${CC}, dropping" >&2 ; \
-				echo "***" >&2 ; \
-			fi ; \
-		    done)
-
 .PHONY: version
 .SILENT: version
 version:
-	echo $(VERSION)
+	 rpm -q --define "_sourcedir ." ${RPMARG} --specfile ${SPECFILE}
 
 .PHONY: repo_version
 .SILENT: repo_version
 repo_version:
-	echo $(shell $(value REPO_VERSION_CMD))
+	 $(value REPO_VERSION_CMD)
 
-.PHONY: pod_clean
-ifndef VERBOSE
-.SILENT: pod_clean
-endif
-pod_clean:
+
+.PHONY: build_dir 
+build_dir: $(BUILDRPMSUBDIRS)
+
+$(BUILDRPMSUBDIRS):
+	mkdir -p $(BUILDRPMSUBDIRS)
+
+.PHONY: _clean
+.SILENT: _clean
+_clean:
+	-rm -f ${NAME}-${VERSION}-*.tar.gz
 	-rm -f ${MANPAGES} *.[0-9].gz ${HTMLMANPAGES} pod2htm*.tmp
 
 # =====================
@@ -109,8 +172,29 @@ install_manpages: $(MANPAGES)
 
 MAN_RELEASE="AppArmor ${VERSION}"
 
-%.1 %.2 %.3 %.4 %.5 %.6 %.7 %.8: %.pod
-	$(POD2MAN) $< --release=$(MAN_RELEASE) --center=AppArmor --stderr --section=$(subst .,,$(suffix $@)) > $@
+%.1: %.pod
+	$(POD2MAN) $< --release=$(MAN_RELEASE) --center=AppArmor --section=1 > $@
+
+%.2: %.pod
+	$(POD2MAN) $< --release=$(MAN_RELEASE) --center=AppArmor --section=2 > $@
+
+%.3: %.pod
+	$(POD2MAN) $< --release=$(MAN_RELEASE) --center=AppArmor --section=3 > $@
+
+%.4: %.pod
+	$(POD2MAN) $< --release=$(MAN_RELEASE) --center=AppArmor --section=4 > $@
+
+%.5: %.pod
+	$(POD2MAN) $< --release=$(MAN_RELEASE) --center=AppArmor --section=5 > $@
+
+%.6: %.pod
+	$(POD2MAN) $< --release=$(MAN_RELEASE) --center=AppArmor --section=6 > $@
+
+%.7: %.pod
+	$(POD2MAN) $< --release=$(MAN_RELEASE) --center=AppArmor --section=7 > $@
+
+%.8: %.pod
+	$(POD2MAN) $< --release=$(MAN_RELEASE) --center=AppArmor --section=8 > $@
 
 %.1.html: %.pod
 	$(POD2HTML) --header --css apparmor.css --infile=$< --outfile=$@
@@ -144,7 +228,3 @@ ENSCRIPT_ARGS=-C -2jGr -f Courier6 -E
 
 %.pm.ps: %.pm
 	enscript ${ENSCRIPT_ARGS} -o $@ $<
-
-.PHONY: check_pod_files
-check_pod_files:
-	LANG=C podchecker -warning -warning *.pod

common/Version

@@ -1 +1 @@
-4.0.0~beta2
+2.6.2~0.devel

common/list_af_names.sh

@@ -1,19 +0,0 @@
-#!/bin/bash -e
-
-# =====================
-# generate list of network protocols based on
-# sys/socket.h for use in multiple locations in
-# the source tree
-# =====================
-
-# It doesn't make sense for AppArmor to mediate PF_UNIX, filter it out. Search
-# for "PF_" constants since that is what is required in bits/socket.h, but
-# rewrite as "AF_".
-
-echo "#include <sys/socket.h>" | \
-  cpp -dM | \
-  LC_ALL=C sed -n \
-    -e '/PF_UNIX/d' \
-    -e 's/PF_LOCAL/PF_UNIX/' \
-    -e 's/^#define[ \t]\+PF_\([A-Z0-9_]\+\)[ \t]\+\([0-9]\+\).*$/AF_\1 \2,/p' | \
-  sort -n -k2

common/list_capabilities.sh

@@ -1,14 +0,0 @@
-#!/bin/bash -e
-
-# =====================
-# generate list of capabilities based on
-# /usr/include/linux/capabilities.h for use in multiple locations in
-# the source tree
-# =====================
-
-echo "#include <linux/capability.h>" | \
-  cpp -dM | \
-  LC_ALL=C sed -n \
-    -e '/CAP_EMPTY_SET/d' \
-    -e 's/^\#define[ \t]\+CAP_\([A-Z0-9_]\+\)[ \t]\+\([0-9xa-f]\+\)\(.*\)$/CAP_\1/p' | \
-  LC_ALL=C sort

deprecated/management/apparmor-dbus/AUTHORS

@@ -0,0 +1 @@
+Matt Barringer <mbarringer@suse.de>

deprecated/management/apparmor-dbus/COPYING

@@ -0,0 +1,340 @@
+		    GNU GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+                       59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+			    Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+		    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+			    NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+		     END OF TERMS AND CONDITIONS
+
+	    How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+    Gnomovision version 69, Copyright (C) year name of author
+    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+  `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+  <signature of Ty Coon>, 1 April 1989
+  Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs.  If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library.  If this is what you want to do, use the GNU Library General
+Public License instead of this License.

deprecated/management/apparmor-dbus/INSTALL

@@ -0,0 +1,167 @@
+Basic Installation
+==================
+
+   These are generic installation instructions.
+
+   The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions.  Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, a file
+`config.cache' that saves the results of its tests to speed up
+reconfiguring, and a file `config.log' containing compiler output
+(useful mainly for debugging `configure').
+
+   If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release.  If at some point `config.cache'
+contains results you don't want to keep, you may remove or edit it.
+
+   The file `configure.in' is used to create `configure' by a program
+called `autoconf'.  You only need `configure.in' if you want to change
+it or regenerate `configure' using a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+  1. `cd' to the directory containing the package's source code and type
+     `./configure' to configure the package for your system.  If you're
+     using `csh' on an old version of System V, you might need to type
+     `sh ./configure' instead to prevent `csh' from trying to execute
+     `configure' itself.
+
+     Running `configure' takes a while.  While running, it prints some
+     messages telling which features it is checking for.
+
+  2. Type `make' to compile the package.
+
+  3. Type `make install' to install the programs and any data files and
+     documentation.
+
+  4. You can remove the program binaries and object files from the
+     source code directory by typing `make clean'.  
+
+Compilers and Options
+=====================
+
+   Some systems require unusual options for compilation or linking that
+the `configure' script does not know about.  You can give `configure'
+initial values for variables by setting them in the environment.  Using
+a Bourne-compatible shell, you can do that on the command line like
+this:
+     CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
+
+Or on systems that have the `env' program, you can do it like this:
+     env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
+
+Compiling For Multiple Architectures
+====================================
+
+   You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'.  `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script.  `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+   If you have to use a `make' that does not supports the `VPATH'
+variable, you have to compile the package for one architecture at a time
+in the source code directory.  After you have installed the package for
+one architecture, use `make distclean' before reconfiguring for another
+architecture.
+
+Installation Names
+==================
+
+   By default, `make install' will install the package's files in
+`/usr/local/bin', `/usr/local/man', etc.  You can specify an
+installation prefix other than `/usr/local' by giving `configure' the
+option `--prefix=PATH'.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+give `configure' the option `--exec-prefix=PATH', the package will use
+PATH as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+   Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System).  The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+   For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+   There may be some features `configure' can not figure out
+automatically, but needs to determine by the type of host the package
+will run on.  Usually `configure' can figure that out, but if it prints
+a message saying it can not guess the host type, give it the
+`--host=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name with three fields:
+     CPU-COMPANY-SYSTEM
+
+See the file `config.sub' for the possible values of each field.  If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the host type.
+
+   If you are building compiler tools for cross-compiling, you can also
+use the `--target=TYPE' option to select the type of system they will
+produce code for and the `--build=TYPE' option to select the type of
+system on which you are compiling the package.
+
+Sharing Defaults
+================
+
+   If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists.  Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Operation Controls
+==================
+
+   `configure' recognizes the following options to control how it
+operates.
+
+`--cache-file=FILE'
+     Use and save the results of the tests in FILE instead of
+     `./config.cache'.  Set FILE to `/dev/null' to disable caching, for
+     debugging `configure'.
+
+`--help'
+     Print a summary of the options to `configure', and exit.
+
+`--quiet'
+`--silent'
+`-q'
+     Do not print messages saying which checks are being made.
+
+`--srcdir=DIR'
+     Look for the package's source code in directory DIR.  Usually
+     `configure' can determine that directory automatically.
+
+`--version'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`configure' also accepts some other, not widely useful, options.
+

deprecated/management/apparmor-dbus/Makefile.am

@@ -0,0 +1,5 @@
+# not a GNU package. You can remove this line, if
+# have all needed files, that a GNU package needs
+AUTOMAKE_OPTIONS = foreign 1.4
+
+SUBDIRS = src

deprecated/management/apparmor-dbus/README

@@ -0,0 +1,8 @@
+In order to actually use aadbus, you need to tell auditd to use it as a dispatcher.  It's simple:
+
+* As root, edit /etc/auditd.conf
+
+* Add the following line (using the correct path, of course):
+	dispatcher=/usr/local/bin/apparmor-dbus
+
+* Restart auditd

deprecated/management/apparmor-dbus/apparmor-dbus.spec

@@ -0,0 +1,43 @@
+#
+# spec file for package apparmor-dbus
+#
+# norootforbuild
+
+Name:		apparmor-dbus
+BuildRequires:	audit-devel dbus-1-devel pkgconfig libapparmor-devel
+Requires:	libapparmor
+Version:	2.3
+Release:	0
+License:	GPL
+Group:		System/Management
+BuildRoot:	%{_tmppath}/%{name}-%{version}-build
+Source0:	%{name}-%{version}.tar.bz2
+
+Summary:	-
+
+%description
+-
+
+%prep
+%setup -n %{name}-%{version}
+%build
+autoreconf --force --install
+export CFLAGS="$RPM_OPT_FLAGS"
+%{?suse_update_config:%{suse_update_config -f}}
+./configure --prefix=%{_prefix}
+make
+
+%install
+rm -rf %{buildroot}
+%makeinstall
+
+%clean
+rm -rf %{buildroot}
+
+%files
+%defattr(-, root, root)
+%{_prefix}/bin/apparmor-dbus
+
+%changelog
+* Thu Sep 13 2007 - sbeattie@suse.de
+- Bump to revision 1.2

deprecated/management/apparmor-dbus/autogen.sh

@@ -0,0 +1,31 @@
+#!/bin/sh
+
+DIE=0
+
+(autoconf --version) < /dev/null > /dev/null 2>&1 || {
+        echo
+        echo "You must have autoconf installed to compile $package."
+        echo "Download the appropriate package for your distribution,"
+        echo "or get the source tarball at ftp://ftp.gnu.org/pub/gnu/"
+        DIE=1
+}
+
+(automake --version) < /dev/null > /dev/null 2>&1 || {
+        echo
+        echo "You must have automake installed to compile $package."
+	echo "Download the appropriate package for your system,"
+	echo "or get the source from one of the GNU ftp sites"
+	echo "listed in http://www.gnu.org/order/ftp.html"
+        DIE=1
+}
+
+if test "$DIE" -eq 1; then
+        exit 1
+fi
+
+echo "Running aclocal"
+aclocal
+echo "Running autoconf"
+autoconf --force
+echo "Running automake -ac"
+automake -ac

deprecated/management/apparmor-dbus/configure.in

@@ -0,0 +1,16 @@
+AC_INIT(configure.in)
+
+AM_INIT_AUTOMAKE(apparmor-dbus, 2.3)
+
+AC_LANG_C
+AC_PROG_CC
+
+AC_CHECK_HEADERS(libaudit.h,,AC_MSG_ERROR([libaudit header file not found!]))
+AC_CHECK_LIB(audit, audit_open)
+AC_CHECK_HEADERS(aalogparse/aalogparse.h)
+AC_CHECK_LIB(apparmor, parse_record)
+PKG_CHECK_MODULES(DBUS, dbus-1 >= 0.60)
+CFLAGS="${CFLAGS} ${DBUS_CFLAGS}"
+AC_CHECK_LIB(dbus-1, exit,,AC_MSG_ERROR([dbus-1 not found!]))
+
+AC_OUTPUT(Makefile src/Makefile)

deprecated/management/apparmor-dbus/src/Makefile.am

@@ -0,0 +1,2 @@
+bin_PROGRAMS = apparmor-dbus
+apparmor_dbus_SOURCES = aadbus.c

deprecated/management/apparmor-dbus/src/aadbus.c

@@ -0,0 +1,322 @@
+#define DBUS_API_SUBJECT_TO_CHANGE
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/uio.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <signal.h>
+#include <fcntl.h>
+#include <errno.h>
+#include <string.h>
+#include <locale.h>
+#include <libaudit.h>
+#include <dbus/dbus.h>
+#include <aalogparse/aalogparse.h>
+
+#define NULLSPACE(x) (x == NULL) ? &empty_string : &x
+#define NULLSTRLEN(x) (x == NULL) ? 1 : (strlen(x) + 1)
+
+// Local data
+static volatile int signaled = 0;
+static int pipe_fd;
+
+// Local functions
+static int event_loop(void);
+static int is_reject(char *data);
+
+// SIGTERM handler
+static void term_handler( int sig )
+{
+	signaled = 1;
+}
+
+
+/*
+ * main is started by auditd. See dispatcher in auditd.conf
+ */
+int main(int argc, char *argv[])
+{
+	struct sigaction sa;
+	
+	setlocale (LC_ALL, "");
+	
+#ifndef DEBUG
+/*	Make sure we are root */
+	if (getuid() != 0) {
+		printf("You must be root to run this program.\n");
+		return 4;
+	}
+#endif
+
+	// register sighandlers
+	sa.sa_flags = 0 ;
+	sa.sa_handler = term_handler;
+	sigemptyset( &sa.sa_mask ) ;
+	sigaction( SIGTERM, &sa, NULL );
+	sa.sa_handler = term_handler;
+	sigemptyset( &sa.sa_mask ) ;
+	sigaction( SIGCHLD, &sa, NULL );
+	sa.sa_handler = SIG_IGN;
+	sigaction( SIGHUP, &sa, NULL );
+	(void)chdir("/");
+
+	// change over to pipe_fd
+	pipe_fd = dup(0);
+	close(0);
+	open("/dev/null", O_RDONLY);
+	fcntl(pipe_fd, F_SETFD, FD_CLOEXEC);
+
+	// Start the program
+	return event_loop();
+}
+
+/* This function is needed for "old" messages which lumped
+ * everything together under one audit ID.
+ */
+static int is_reject (char *data)
+{
+	int ret = -1;
+	/* Look for the first space */
+	char *start = strchr(data, ' ');
+	if ((start != NULL) && (strlen(start) > 9))
+	{
+		if (strncmp(start + 1, "REJECTING", 9) == 0)
+		{
+			ret = 0;
+		}
+	}
+
+	return ret;
+}
+
+static int event_loop(void)
+{
+	void* data;
+	char *empty_string = " "; /* This is a quick way to indicate a 'null' value in our DBUS message */
+
+	struct iovec vec[2];
+	struct audit_dispatcher_header hdr;
+
+	DBusError		error;		/* Error, if any */
+	DBusMessage		*message;	/* Message to send */
+	static DBusConnection	*con = NULL;	/* Connection to DBUS server */
+	DBusMessageIter		iter, 		/* The main message iterator */
+				profileIter,
+				nameIter,
+				name2Iter,
+				parentIter,
+				activeIter,
+				dataIter;
+
+	char *line = NULL, *parsable_line = NULL;
+	int real_data_size;
+	aa_log_record *record;
+	int is_rejection = 0;
+
+	if (con && !dbus_connection_get_is_connected(con))
+	{
+		dbus_connection_unref(con);
+		con = NULL;
+	}
+	
+	if (!con)
+	{
+		dbus_error_init(&error);
+		con = dbus_bus_get(DBUS_BUS_SYSTEM, &error);
+		if (!con)
+		{
+			dbus_error_free(&error);
+			return 1;
+		}
+	}
+
+
+ 	//message = dbus_message_new_signal("/com/Novell/AppArmor","com.novell.apparmor", "Reject");
+
+	/* allocate data structures */
+	data = malloc(MAX_AUDIT_MESSAGE_LENGTH);
+	if (data == NULL) 
+	{
+		printf("Cannot allocate buffer\n");
+		return 1;
+	}
+
+	memset(data, 0, MAX_AUDIT_MESSAGE_LENGTH);
+	memset(&hdr, 0, sizeof(hdr));
+	do
+	{
+		int rc;
+		parsable_line = NULL;
+		is_rejection = 0;
+		struct timeval tv;
+		fd_set fd;
+		tv.tv_sec = 1;
+		tv.tv_usec = 0;
+		FD_ZERO(&fd);
+		FD_SET(pipe_fd, &fd);
+		rc = select(pipe_fd+1, &fd, NULL, NULL, &tv);
+		if (rc == 0) 
+			continue;
+		 else if (rc == -1)
+			break;
+
+		/* Get header first. it is fixed size */
+		vec[0].iov_base = (void*)&hdr;
+		vec[0].iov_len = sizeof(hdr);
+
+		memset(data, 0, MAX_AUDIT_MESSAGE_LENGTH);
+        	// Next payload 
+		vec[1].iov_base = data;
+		vec[1].iov_len = MAX_AUDIT_MESSAGE_LENGTH; 
+
+		rc = readv(pipe_fd, vec, 2);
+		if (rc == 0 || rc == -1) {
+			printf("rc == %d(%s)\n", rc, strerror(errno));
+			break;
+		}
+
+		/* Handle the AppArmor events.
+		 * 1500 is used for "old" style messages.
+		 * 1503 is used for APPARMOR_DENIED messages. 
+		 */
+		if ((hdr.type == 1500) || (hdr.type == 1503))
+		{
+			line = (char *) data;
+			record = NULL;
+			if (hdr.type == 1503)
+				is_rejection = 1;
+			if ((hdr.type == 1500) && (is_reject(line) == 0))
+				is_rejection = 1;
+
+			/* We only care about REJECTING messages */
+ 			if (is_rejection == 1)
+ 			{
+				/* parse_record expects things like they appear in audit.log -
+				 * which means we need to prepend TYPE=APPARMOR (if hdr.type is 1500)
+				 * or type=APPARMOR_DENIED (if hdr.type is 1503).  This is not ideal.
+				 */
+				real_data_size = strlen(line);
+				if (hdr.type == 1500)
+				{
+					parsable_line = (char *) malloc(real_data_size + 20);
+					snprintf(parsable_line, real_data_size + 19, "type=APPARMOR msg=%s", line);
+				}
+				else
+				{
+					parsable_line = (char *) malloc(real_data_size + 27);
+					snprintf(parsable_line, real_data_size + 26, "type=APPARMOR_DENIED msg=%s", line);
+				}
+
+				record = parse_record(parsable_line);
+				message = dbus_message_new_signal("/com/Novell/AppArmor","com.novell.apparmor", "REJECT");
+				dbus_message_iter_init_append(message, &iter);
+
+				/*
+				 * The message has a number of fields appended to it,
+				 * all of which map to the aa_log_record struct that we get back from
+				 * parse_record().  If an entry in the struct is NULL or otherwise invalid,
+				 * the field is still appended as a single blank space (in the case of strings), or a 
+				 * 0 in case of integers (which are all PIDs and unlikely to ever be 0).
+				 *
+				 * TODO: Pass a bitmask int along for the denied & requested masks
+				 *
+				 * 1 - The full string - BYTE ARRAY
+				 * 2 - The PID (record->pid)  - DBUS_TYPE_INT64
+				 * 3 - The task (record->task) - DBUS_TYPE_INT64
+				 * 4 - The audit ID (record->audit_id) - DBUS_TYPE_STRING
+				 * 5 - The operation (record->operation: "Exec" "ptrace" etc) - DBUS_TYPE_STRING
+				 * 6 - The denied mask (record->denied_mask: "rwx" etc) - DBUS_TYPE_STRING
+				 * 7 - The requested mask (record->requested_mask) - DBUS_TYPE_STRING
+				 * 8 - The name of the profile (record->profile) - BYTE ARRAY
+				 * 9 - The first name field (record->name) - BYTE ARRAY
+				 * 10- The second name field (record->name2) - BYTE ARRAY
+				 * 11- The attribute (record->attribute) - DBUS_TYPE_STRING
+				 * 12- The parent task (record->parent) - BYTE ARRAY
+				 * 13- The magic token (record->magic_token) - DBUS_TYPE_INT64
+				 * 14- The info field (record->info) - BYTE ARRAY
+				 * 15- The active hat (record->active_hat) - BYTE ARRAY
+				 */
+
+ 				if (record != NULL)
+ 				{
+
+					/* Please note: NULLSPACE is defined at the top of this file, and will expand to
+					   a ternary conditional:
+					   (record->audit_id == NULL) ? &empty_string : &record->audit_id
+					   for example.
+
+					   The way we handle strings is ugly - some of the characters we allow (0x80, for example) are invalid Unicode,
+					   which will cause our DBus connection to be dropped if we send them as a DBUS_TYPE_STRING.
+					   Instead, we send a bunch of containers, each with a byte array.  Perhaps a struct would be better? 
+					*/
+
+					dbus_message_iter_open_container(&iter, DBUS_TYPE_ARRAY, DBUS_TYPE_BYTE_AS_STRING, &dataIter);
+					dbus_message_iter_append_fixed_array(&dataIter, DBUS_TYPE_BYTE, &data, strlen(data) + 1);
+					dbus_message_iter_close_container(&iter, &dataIter);
+
+					dbus_message_iter_append_basic(&iter, DBUS_TYPE_INT64, &record->pid);
+					dbus_message_iter_append_basic(&iter, DBUS_TYPE_INT64, &record->task);	
+					dbus_message_iter_append_basic(&iter, DBUS_TYPE_STRING, NULLSPACE(record->audit_id));
+					dbus_message_iter_append_basic(&iter, DBUS_TYPE_STRING, NULLSPACE(record->operation));
+
+					dbus_message_iter_append_basic(&iter, DBUS_TYPE_STRING, NULLSPACE(record->denied_mask));
+					dbus_message_iter_append_basic(&iter, DBUS_TYPE_STRING, NULLSPACE(record->requested_mask));
+
+					dbus_message_iter_open_container(&iter, DBUS_TYPE_ARRAY, DBUS_TYPE_BYTE_AS_STRING, &profileIter);
+					dbus_message_iter_append_fixed_array(&profileIter,
+										DBUS_TYPE_BYTE,
+										NULLSPACE(record->profile),
+										NULLSTRLEN(record->profile));
+					dbus_message_iter_close_container(&iter, &profileIter);
+
+					dbus_message_iter_open_container(&iter, DBUS_TYPE_ARRAY, DBUS_TYPE_BYTE_AS_STRING, &nameIter);
+					dbus_message_iter_append_fixed_array(&nameIter,
+										DBUS_TYPE_BYTE,
+										NULLSPACE(record->name),
+										NULLSTRLEN(record->name));
+					dbus_message_iter_close_container(&iter, &nameIter);
+
+					dbus_message_iter_open_container(&iter, DBUS_TYPE_ARRAY, DBUS_TYPE_BYTE_AS_STRING, &name2Iter);
+					dbus_message_iter_append_fixed_array(&name2Iter,
+										DBUS_TYPE_BYTE,
+										NULLSPACE(record->name2),
+										NULLSTRLEN(record->name2));
+					dbus_message_iter_close_container(&iter, &name2Iter);
+
+					dbus_message_iter_append_basic(&iter, DBUS_TYPE_STRING, NULLSPACE(record->attribute));
+
+					dbus_message_iter_open_container(&iter, DBUS_TYPE_ARRAY, DBUS_TYPE_BYTE_AS_STRING, &parentIter);
+					dbus_message_iter_append_fixed_array(&parentIter,
+										DBUS_TYPE_BYTE,
+										NULLSPACE(record->parent),
+										NULLSTRLEN(record->parent));
+					dbus_message_iter_close_container(&iter, &parentIter);
+
+					dbus_message_iter_append_basic(&iter, DBUS_TYPE_INT64, &record->magic_token);
+					dbus_message_iter_append_basic(&iter, DBUS_TYPE_STRING, NULLSPACE(record->info));
+
+					dbus_message_iter_open_container(&iter, DBUS_TYPE_ARRAY, DBUS_TYPE_BYTE_AS_STRING, &activeIter);
+					dbus_message_iter_append_fixed_array(&activeIter,
+										DBUS_TYPE_BYTE,
+										NULLSPACE(record->active_hat),
+										NULLSTRLEN(record->active_hat));
+					dbus_message_iter_close_container(&iter, &activeIter);
+
+
+				}
+				dbus_connection_send(con, message, NULL);
+				dbus_connection_flush(con);
+				dbus_message_unref(message);
+  				free_record(record);
+
+				if (parsable_line != NULL)
+					free(parsable_line);
+ 			}
+		}
+	} while(!signaled);
+
+	if (con)
+	        dbus_connection_unref(con);
+	free(data);
+	return 0;
+}

deprecated/management/profile-editor/AUTHORS

@@ -0,0 +1 @@
+Matt Barringer <mbarringer@suse.de>

deprecated/management/profile-editor/COPYING

@@ -0,0 +1,340 @@
+		    GNU GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+                       59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+			    Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+		    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+			    NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+		     END OF TERMS AND CONDITIONS
+
+	    How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+    Gnomovision version 69, Copyright (C) year name of author
+    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+  `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+  <signature of Ty Coon>, 1 April 1989
+  Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs.  If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library.  If this is what you want to do, use the GNU Library General
+Public License instead of this License.

deprecated/management/profile-editor/INSTALL

@@ -0,0 +1,167 @@
+Basic Installation
+==================
+
+   These are generic installation instructions.
+
+   The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions.  Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, a file
+`config.cache' that saves the results of its tests to speed up
+reconfiguring, and a file `config.log' containing compiler output
+(useful mainly for debugging `configure').
+
+   If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release.  If at some point `config.cache'
+contains results you don't want to keep, you may remove or edit it.
+
+   The file `configure.in' is used to create `configure' by a program
+called `autoconf'.  You only need `configure.in' if you want to change
+it or regenerate `configure' using a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+  1. `cd' to the directory containing the package's source code and type
+     `./configure' to configure the package for your system.  If you're
+     using `csh' on an old version of System V, you might need to type
+     `sh ./configure' instead to prevent `csh' from trying to execute
+     `configure' itself.
+
+     Running `configure' takes a while.  While running, it prints some
+     messages telling which features it is checking for.
+
+  2. Type `make' to compile the package.
+
+  3. Type `make install' to install the programs and any data files and
+     documentation.
+
+  4. You can remove the program binaries and object files from the
+     source code directory by typing `make clean'.  
+
+Compilers and Options
+=====================
+
+   Some systems require unusual options for compilation or linking that
+the `configure' script does not know about.  You can give `configure'
+initial values for variables by setting them in the environment.  Using
+a Bourne-compatible shell, you can do that on the command line like
+this:
+     CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
+
+Or on systems that have the `env' program, you can do it like this:
+     env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
+
+Compiling For Multiple Architectures
+====================================
+
+   You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'.  `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script.  `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+   If you have to use a `make' that does not supports the `VPATH'
+variable, you have to compile the package for one architecture at a time
+in the source code directory.  After you have installed the package for
+one architecture, use `make distclean' before reconfiguring for another
+architecture.
+
+Installation Names
+==================
+
+   By default, `make install' will install the package's files in
+`/usr/local/bin', `/usr/local/man', etc.  You can specify an
+installation prefix other than `/usr/local' by giving `configure' the
+option `--prefix=PATH'.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+give `configure' the option `--exec-prefix=PATH', the package will use
+PATH as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+   Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System).  The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+   For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+   There may be some features `configure' can not figure out
+automatically, but needs to determine by the type of host the package
+will run on.  Usually `configure' can figure that out, but if it prints
+a message saying it can not guess the host type, give it the
+`--host=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name with three fields:
+     CPU-COMPANY-SYSTEM
+
+See the file `config.sub' for the possible values of each field.  If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the host type.
+
+   If you are building compiler tools for cross-compiling, you can also
+use the `--target=TYPE' option to select the type of system they will
+produce code for and the `--build=TYPE' option to select the type of
+system on which you are compiling the package.
+
+Sharing Defaults
+================
+
+   If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists.  Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Operation Controls
+==================
+
+   `configure' recognizes the following options to control how it
+operates.
+
+`--cache-file=FILE'
+     Use and save the results of the tests in FILE instead of
+     `./config.cache'.  Set FILE to `/dev/null' to disable caching, for
+     debugging `configure'.
+
+`--help'
+     Print a summary of the options to `configure', and exit.
+
+`--quiet'
+`--silent'
+`-q'
+     Do not print messages saying which checks are being made.
+
+`--srcdir=DIR'
+     Look for the package's source code in directory DIR.  Usually
+     `configure' can determine that directory automatically.
+
+`--version'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`configure' also accepts some other, not widely useful, options.
+

deprecated/management/profile-editor/Makefile.am

@@ -0,0 +1,2 @@
+SUBDIRS = src doc
+

deprecated/management/profile-editor/Makefile.cvs

@@ -0,0 +1,5 @@
+default: all
+
+all:
+	srcdir=`pwd` sh macros/autogen.sh
+

deprecated/management/profile-editor/README

@@ -0,0 +1,6 @@
+The profile editor requires wxWidgets 2.6 or higher.  Your distro probably has a 
+binary package you could install, or you can install from a source distribution 
+from http://www.wxwidgets.org
+
+This program is released under the GPL, except for all source files under
+the src/wxStyledTextCtrl directory.  Check there for license details for those files.

deprecated/management/profile-editor/configure.in

@@ -0,0 +1,55 @@
+AC_INIT(src/profileeditor.cpp)
+AM_INIT_AUTOMAKE(profileeditor, 0.9)
+
+AC_PROG_CXX
+AC_PROG_INSTALL
+AC_LIBTOOL_DLOPEN
+AC_PROG_LIBTOOL
+
+CPPFLAGS="$CPPFLAGS -Wall -g -fexceptions"
+CXXFLAGS="$CPPFLAGS -Wall -g -fexceptions"
+
+WXCONFIG=wx-config
+AC_ARG_WITH(wx-config,
+[[  --with-wx-config=FILE     Use the given path to wx-config when determining
+                            wxWidgets configuration; defaults to "wx-config"]],
+[
+    if test "$withval" != "yes" -a "$withval" != ""; then
+        WXCONFIG=$withval
+    fi
+])
+
+wxversion=0
+
+AC_DEFUN([WXTEST],
+[
+	AC_REQUIRE([AC_PROG_AWK])
+	AC_MSG_CHECKING([wxWidgets version])
+	if wxversion=`$WXCONFIG --version`; then
+		AC_MSG_RESULT([$wxversion])
+	else
+		AC_MSG_RESULT([not found])
+		AC_MSG_ERROR([wxWidgets is required. Try --with-wx-config.])
+	fi])
+
+# Call WXTEST func
+WXTEST
+
+# Verify minimus requires
+vers=`echo $wxversion | $AWK 'BEGIN { FS = "."; } { printf "% d", ($1 * 1000 + $2) * 1000 + $3;}'`
+if test -n "$vers" && test "$vers" -ge 2006000; then
+	WX_CPPFLAGS="`$WXCONFIG --cppflags`"
+	WX_CXXFLAGS="`$WXCONFIG --cxxflags | sed -e 's/-fno-exceptions//'`"
+	WX_LIBS="`$WXCONFIG --libs`"
+else
+	AC_MSG_ERROR([wxWidgets 2.6.0 or newer is required])
+fi
+
+
+CPPFLAGS="$CPPFLAGS $WX_CPPFLAGS"
+CXXFLAGS="$CXXFLAGS $WX_CPPFLAGS"
+
+
+AC_SUBST(WX_LIBS)
+
+AC_OUTPUT(Makefile src/Makefile src/wxStyledTextCtrl/Makefile doc/Makefile)

deprecated/management/profile-editor/doc/Makefile.am

@@ -0,0 +1,4 @@
+docdir = $(datadir)/doc/@PACKAGE@
+
+doc_DATA = \
+        en/AppArmorProfileEditor.htb

deprecated/management/profile-editor/doc/Makefile.in

@@ -0,0 +1,342 @@
+# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = doc
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__installdirs = "$(DESTDIR)$(docdir)"
+docDATA_INSTALL = $(INSTALL_DATA)
+DATA = $(doc_DATA)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+WX_LIBS = @WX_LIBS@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+docdir = $(datadir)/doc/@PACKAGE@
+doc_DATA = \
+        en/AppArmorProfileEditor.htb
+
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  doc/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  doc/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
+install-docDATA: $(doc_DATA)
+	@$(NORMAL_INSTALL)
+	test -z "$(docdir)" || $(mkdir_p) "$(DESTDIR)$(docdir)"
+	@list='$(doc_DATA)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f=$(am__strip_dir) \
+	  echo " $(docDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(docdir)/$$f'"; \
+	  $(docDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(docdir)/$$f"; \
+	done
+
+uninstall-docDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(doc_DATA)'; for p in $$list; do \
+	  f=$(am__strip_dir) \
+	  echo " rm -f '$(DESTDIR)$(docdir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(docdir)/$$f"; \
+	done
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkdir_p) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(DATA)
+installdirs:
+	for dir in "$(DESTDIR)$(docdir)"; do \
+	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am: install-docDATA
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-docDATA uninstall-info-am
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+	distclean distclean-generic distclean-libtool distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-docDATA install-exec \
+	install-exec-am install-info install-info-am install-man \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	uninstall uninstall-am uninstall-docDATA uninstall-info-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

deprecated/management/profile-editor/doc/en/Makefile.am

@@ -0,0 +1,2 @@
+KDE_DOCS = profileeditor
+KDE_LANG = en

deprecated/management/profile-editor/macros/autogen.sh

@@ -0,0 +1,6 @@
+#!/bin/sh
+aclocal
+libtoolize --automake --force --copy
+automake -a -c
+autoconf
+

deprecated/management/profile-editor/profileeditor.spec

@@ -0,0 +1,44 @@
+# norootforbuild
+Name: apparmor-profile-editor
+BuildRequires: wxGTK-devel gcc-c++ 
+Version: 0.9
+Release: 1
+Vendor: Novell
+Copyright: GPL
+Summary: AppArmor profile editor
+Group: Application/Editors
+Packager: mbarringer@suse.de
+BuildRoot:  %{_tmppath}/%{name}-root 
+Source: apparmor-profile-editor-0.9.tar.gz
+
+%description
+AppArmor profile editor
+
+%prep
+%setup -q -n %{name}-%{version}
+%build
+autoreconf --force --install
+export CFLAGS="$RPM_OPT_FLAGS -DSCI_LEXER -DLINK_LEXERS -fPIC -DPIC -DWX_PRECOMP -DNO_GCC_PRAGMA -D__WX"
+export CXXFLAGS="$RPM_OPT_FLAGS -DSCI_LEXER -DLINK_LEXERS -fPIC -DPIC -DWX_PRECOMP -DNO_GCC_PRAGMA -D__WX" 
+%{?suse_update_config:%{suse_update_config -f}}
+./configure --prefix=%{_prefix} --disable-debug --enable-debug=no
+make
+
+%install
+strip $RPM_BUILD_ROOT%{_prefix}/bin/* || :
+rm -rf %{buildroot}
+%makeinstall
+
+%clean
+rm -rf %{buildroot}
+
+%post -p /sbin/ldconfig
+%postun -p /sbin/ldconfig
+%files
+%defattr(-, root, root)
+%{_prefix}/bin/profileeditor
+%{_prefix}/share/doc/profileeditor/AppArmorProfileEditor.htb
+%dir %{_prefix}/share/doc/profileeditor
+%doc AUTHORS COPYING ChangeLog NEWS README TODO
+%changelog
+

deprecated/management/profile-editor/src/AboutDialog.cpp

@@ -0,0 +1,114 @@
+/*	AppArmor Profile Editor (C) 2006 Novell, Inc.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ * 
+ */
+
+#include "wx/wxprec.h"
+
+#ifndef WX_PRECOMP
+#include "wx/wx.h"
+#endif
+
+#include <wx/wfstream.h>
+#include "AboutDialog.h"
+#include "opensuse_logo.xpm"
+
+IMPLEMENT_DYNAMIC_CLASS(AboutDialog, wxDialog)
+
+BEGIN_EVENT_TABLE(AboutDialog, wxDialog)
+END_EVENT_TABLE()
+
+AboutDialog::AboutDialog()
+{
+}
+
+AboutDialog::AboutDialog(wxWindow* parent, 
+			wxWindowID id,
+			const wxString& caption,
+			const wxPoint& pos,
+			const wxSize& size,
+			long style)
+{
+    Create(parent, id, caption, pos, size, style);
+}
+
+bool AboutDialog::Create(wxWindow* parent,
+			wxWindowID id,
+			const wxString& caption,
+			const wxPoint& pos,
+			const wxSize& size,
+			long style)
+{
+	mpLogoBitmap = NULL;
+	mpVersionStaticText = NULL;
+	mpCopyrightStaticText = NULL;
+	mpOkButtonSizer = NULL;
+	mpOkButton = NULL;
+
+	SetExtraStyle(GetExtraStyle() | wxWS_EX_BLOCK_EVENTS);
+	wxDialog::Create(parent, id, caption, pos, size, style);
+	
+	CreateControls();
+	GetSizer()->Fit(this);
+	GetSizer()->SetSizeHints(this);
+	Centre();
+
+	return true;
+}
+
+void AboutDialog::CreateControls()
+{
+	SetBackgroundColour(wxColour(255, 255, 255));
+	wxBoxSizer* mainSizer = new wxBoxSizer(wxVERTICAL);
+	SetSizer(mainSizer);
+	
+	wxBitmap mpLogoBitmapBitmap(opensuse_logo_xpm);
+	mpLogoBitmap = new wxStaticBitmap(this, 
+					wxID_ANY,
+					mpLogoBitmapBitmap, 
+					wxDefaultPosition,
+					wxSize(223, 137),
+					0);
+	mainSizer->Add(mpLogoBitmap, 0, wxALIGN_CENTER_HORIZONTAL|wxALL, 5);
+	
+	mpVersionStaticText = new wxStaticText(this,
+					wxID_ANY,
+					VERSION_STRING, 
+					wxDefaultPosition,
+					wxDefaultSize,
+					0);
+	mainSizer->Add(mpVersionStaticText, 0, wxALIGN_CENTER_HORIZONTAL|wxALL|wxADJUST_MINSIZE, 5);
+	
+	mpCopyrightStaticText = new wxStaticText(this, 
+						wxID_ANY,
+						_("(C) 2006 Novell, Inc\n"),
+						wxDefaultPosition,
+						wxDefaultSize,
+						0);
+	mainSizer->Add(mpCopyrightStaticText, 0, wxALIGN_CENTER_HORIZONTAL|wxALL|wxADJUST_MINSIZE, 5);
+	
+	mpLicenseTextCtrl = new wxTextCtrl(this,
+					wxID_ANY,
+					_T(""), 
+					wxDefaultPosition,
+					wxSize(400, -1),
+					wxTE_MULTILINE|wxTE_READONLY);
+	mpLicenseTextCtrl->SetValue(GPL_STRING);
+	mainSizer->Add(mpLicenseTextCtrl, 0, wxGROW|wxALL, 5);
+
+	mpOkButtonSizer = new wxStdDialogButtonSizer;
+	
+	mainSizer->Add(mpOkButtonSizer, 0, wxALIGN_CENTER_HORIZONTAL|wxALL, 5);
+	mpOkButton = new wxButton(this, 
+				wxID_OK,
+				_("&OK"),
+				wxDefaultPosition,
+				wxDefaultSize,
+				0);
+	mpOkButtonSizer->AddButton(mpOkButton);
+	mpOkButtonSizer->Realize();
+}

deprecated/management/profile-editor/src/AboutDialog.h

@@ -0,0 +1,56 @@
+#ifndef _ABOUTDIALOG_H_
+#define _ABOUTDIALOG_H_
+
+#define VERSION_STRING _("AppArmor Profile Editor version 0.9")
+#define GPL_STRING _(" \
+Portions of this software (C) 1998-2003 by Neil Hodgson <neilh@scintilla.org>\n\n \
+This rest of this program is free software; you can redistribute it and/or modify \
+it under the terms of the GNU General Public License as published by \
+the Free Software Foundation; either version 2 of the License, or \
+(at your option) any later version. \
+\n\n \
+This program is distributed in the hope that it will be useful, \
+but WITHOUT ANY WARRANTY; without even the implied warranty of \
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the \
+GNU General Public License for more details. \
+\n\n \
+You should have received a copy of the GNU General Public License \
+along with this program; if not, write to the Free Software \
+Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA \
+")
+
+/**
+ * The "About" dialog
+ */
+class AboutDialog: public wxDialog
+{    
+	DECLARE_DYNAMIC_CLASS(AboutDialog)
+	DECLARE_EVENT_TABLE()
+	
+public:
+	AboutDialog();
+	AboutDialog(wxWindow* parent, 
+			wxWindowID id = wxID_ANY,
+			const wxString& caption = _T("About"), 
+			const wxPoint& pos = wxDefaultPosition, 
+			const wxSize& size = wxSize(400, 300), 
+			long style = wxCAPTION|wxRESIZE_BORDER|wxSYSTEM_MENU|wxCLOSE_BOX);
+	bool Create(wxWindow* parent, 
+			wxWindowID id = wxID_ANY,
+			const wxString& caption = _T("About"), 
+			const wxPoint& pos = wxDefaultPosition, 
+			const wxSize& size = wxSize(400, 300), 
+			long style = wxCAPTION|wxRESIZE_BORDER|wxSYSTEM_MENU|wxCLOSE_BOX);
+	void CreateControls();
+	
+private:
+	wxStaticBitmap* mpLogoBitmap;
+	wxStaticText* mpVersionStaticText;
+	wxStaticText* mpCopyrightStaticText;
+	wxStdDialogButtonSizer* mpOkButtonSizer;
+	wxTextCtrl* mpLicenseTextCtrl;
+	wxButton* mpOkButton;
+};
+
+#endif
+// _ABOUTDIALOG_H_

deprecated/management/profile-editor/src/Configuration.cpp

@@ -0,0 +1,185 @@
+/*	AppArmor Profile Editor (C) 2006 Novell, Inc.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ * 
+ */
+
+#include "wx/wxprec.h"
+
+#ifndef WX_PRECOMP
+#include "wx/wx.h"
+#endif
+
+#include <wx/config.h>
+#include "Configuration.h"
+
+// Initialize all of the static variables
+wxString Configuration::mProfileDirectory = wxEmptyString;
+wxString Configuration::mProfileEditorExecutable = wxEmptyString;
+wxString Configuration::mParserCommand = wxEmptyString;
+wxString Configuration::mTemplateText = wxEmptyString;
+wxColour Configuration::mCommentColour = wxColour(DEFAULT_COMMENT_COLOUR);
+wxColour Configuration::mIncludeColour = wxColour(DEFAULT_INCLUDE_COLOUR);
+wxColour Configuration::mCapColour = wxColour(DEFAULT_CAP_COLOUR);
+wxColour Configuration::mPathColour = wxColour(DEFAULT_PATH_COLOUR);
+wxColour Configuration::mPermColour = wxColour(DEFAULT_PERM_COLOUR);
+wxFont Configuration::mCapabilityFont(10, wxFONTFAMILY_DEFAULT, wxFONTSTYLE_NORMAL, wxFONTWEIGHT_NORMAL);
+wxFont Configuration::mCommentFont(10, wxFONTFAMILY_DEFAULT, wxFONTSTYLE_ITALIC, wxFONTWEIGHT_NORMAL);
+wxFont Configuration::mIncludeFont(10, wxFONTFAMILY_DEFAULT, wxFONTSTYLE_NORMAL, wxFONTWEIGHT_NORMAL);
+wxFont Configuration::mPathFont(10, wxFONTFAMILY_DEFAULT, wxFONTSTYLE_NORMAL, wxFONTWEIGHT_BOLD);
+wxFont Configuration::mPermsFont(10, wxFONTFAMILY_DEFAULT, wxFONTSTYLE_NORMAL,wxFONTWEIGHT_NORMAL);
+int Configuration::mWindowX;
+int Configuration::mWindowY;
+int Configuration::mWindowHeight;
+int Configuration::mWindowWidth;
+/**
+ * Reads in the initial variables
+ */
+void Configuration::Initialize()
+{
+	// Read in all of the values
+	mProfileEditorExecutable = wxTheApp->argv[0];
+	mWindowX = wxConfig::Get()->Read(_("WindowX"), 50);
+	mWindowY = wxConfig::Get()->Read(_("WindowY"), 50);
+	mWindowWidth = wxConfig::Get()->Read(_("WindowWidth"), 800);
+	mWindowHeight = wxConfig::Get()->Read(_("WindowHeight"), 600);
+	mProfileDirectory = wxConfig::Get()->Read(_("ProfileDirectory"), Configuration::BestGuessProfileDirectory());
+	mParserCommand = wxConfig::Get()->Read(_("Parser"), BestGuessParserCommand());
+	mTemplateText = wxConfig::Get()->Read(_("ProfileTemplate"), wxEmptyString);	
+	mCommentColour = _ReadColour(_("CommentColour"), mCommentColour);
+	mIncludeColour = _ReadColour(_("IncludeColour"), mIncludeColour);
+	mCapColour = _ReadColour(_("CapabilityColour"), mCapColour);
+	mPathColour = _ReadColour(_("PathColour"), mPathColour);
+	mPermColour = _ReadColour(_("PermissionColour"), mPermColour);
+	_ReadFont(_("CommentFont"), mCommentFont);
+	_ReadFont(_("IncludeFont"), mIncludeFont);
+	_ReadFont(_("CapabilityFont"), mCapabilityFont);
+	_ReadFont(_("PathFont"), mPathFont);
+	_ReadFont(_("PermsFont"), mPermsFont);
+
+}
+
+/**
+ * Profiles are most likely stored in either /etc/subdomain.d or
+ * /etc/apparmor.d.  Stat each to see which.
+ * @param void
+ * @return profile directory
+ */
+wxString Configuration::BestGuessProfileDirectory(void)
+{
+	if (wxDirExists(_("/etc/apparmor.d")))
+		return (_("/etc/apparmor.d"));
+	else if (wxDirExists(_("/etc/subdomain.d")))
+		return (_("/etc/subdomain.d"));
+	else
+		return (_("/"));
+}
+
+/**
+ * The parser is probably apparmor_parser or
+ * subdomain_parser.  If it's neither, the user
+ * will need to set it manually, so return /bin/false
+ * @return the path to the parser
+ */
+wxString Configuration::BestGuessParserCommand()
+{
+	if (wxFileExists(_("/sbin/apparmor_parser")))
+		return _("/sbin/apparmor_parser");
+	else if (wxFileExists(_("/sbin/subdomain_parser")))
+		return _("/sbin/subdomain_parser");
+	else 
+		return _("/bin/false");
+}
+
+/**
+ * Writes all of the values to disk
+ * @return only true for now
+ */
+bool Configuration::CommitChanges()
+{
+	wxConfig::Get()->Write(_("ProfileDirectory"), mProfileDirectory);
+	wxConfig::Get()->Write(_("Parser"), mParserCommand);
+	wxConfig::Get()->Write(_("ProfileTemplate"), mTemplateText);
+	_WriteColour(_("CommentColour"), mCommentColour);
+	_WriteColour(_("IncludeColour"), mIncludeColour);
+	_WriteColour(_("CapabilityColour"), mCapColour);
+	_WriteColour(_("PathColour"), mPathColour);
+	_WriteColour(_("PermissionColour"), mPermColour);
+	wxConfig::Get()->Write(_("CommentFont"), mCommentFont.GetNativeFontInfoDesc());
+	wxConfig::Get()->Write(_("IncludeFont"),  mIncludeFont.GetNativeFontInfoDesc());
+	wxConfig::Get()->Write(_("CapabilityFont"),  mCapabilityFont.GetNativeFontInfoDesc());
+	wxConfig::Get()->Write(_("PathFont"),  mPathFont.GetNativeFontInfoDesc());
+	wxConfig::Get()->Write(_("PermsFont"),  mPermsFont.GetNativeFontInfoDesc());
+	wxConfig::Get()->Flush();
+	return true;
+}
+
+/**
+ * Writes the given window settings to the configuration file.
+ * This is kept separately from CommitChanges() because:
+ * a) There's no reason to re-write all configuration changes on exit and
+ * b) There's no reason to update the window position and size on every OnSize() event
+ */
+void Configuration::WriteWindowSettings(const wxPoint &pos, const wxSize& size)
+{
+	wxConfig::Get()->Write(_("WindowX"), pos.x);
+	wxConfig::Get()->Write(_("WindowY"), pos.y);
+	wxConfig::Get()->Write(_("WindowWidth"), size.GetWidth());
+	wxConfig::Get()->Write(_("WindowHeight"), size.GetHeight());
+	wxConfig::Get()->Flush();
+}
+/**
+ * Reads a colour setting from the config file and translates it into
+ * a wxColour.  If it can't convert the stored value, or the stored value 
+ * does not exist, it will return whatever is passed as defaultColour.
+ * @param key the configuration key
+ * @param defaultColour a colour to return
+ * @return a colour
+ */
+wxColour Configuration::_ReadColour(const wxString& key, const wxColour& defaultColour)
+{
+	wxColour ret;
+	wxString tmpStr = wxConfig::Get()->Read(key, wxEmptyString);
+
+	if (tmpStr.Length() == 6)
+	{
+		ret.Set(wxHexToDec(tmpStr.Mid(0,2)), // Red
+			wxHexToDec(tmpStr.Mid(2,2)), // Green
+			wxHexToDec(tmpStr.Mid(4,2)) // Blue
+		);
+	}
+
+	if (ret.Ok())
+		return ret;
+	else
+        	return defaultColour;
+}
+
+/**
+ * Reads a font from the configuration file, and sets it as the 'font'
+ * @param key configuration key
+ * @param font the font to set
+ */
+void Configuration::_ReadFont(const wxString& key, wxFont& font)
+{
+	wxString tmpStr;
+	if (wxConfig::Get()->Read(key, &tmpStr))
+		font.SetNativeFontInfo(tmpStr);
+}
+
+/**
+ * Takes a wxColour and converts it to a hex string for writing to disk.
+ * @param key configuration key
+ * @param colour the colour to convert
+ */
+void Configuration::_WriteColour(const wxString& key, const wxColour& colour)
+{
+	wxConfig::Get()->Write(key, wxString::Format(_T("%02x%02x%02x"),
+							colour.Red(),
+							colour.Green(),
+							colour.Blue()));
+}
+

deprecated/management/profile-editor/src/Configuration.h

@@ -0,0 +1,84 @@
+#ifndef CONFIGURATION_H
+#define CONFIGURATION_H
+
+#define DEFAULT_COMMENT_COLOUR 31, 31, 210
+#define DEFAULT_INCLUDE_COLOUR 56, 136, 31
+#define DEFAULT_CAP_COLOUR 229, 33, 204
+#define DEFAULT_PATH_COLOUR 1, 1, 1
+#define DEFAULT_PERM_COLOUR 160, 32, 240
+
+class wxConfig;
+
+/**
+ * The configuration details class
+ */
+class Configuration
+{
+public:
+	static void Initialize();
+	static wxString BestGuessProfileDirectory();
+	static wxString BestGuessParserCommand();
+	static bool CommitChanges();
+
+	static wxString GetProfileDirectory() { return mProfileDirectory; }
+	static wxString GetEditorExecutable() { return mProfileEditorExecutable; }
+	static wxString GetTemplateText() { return mTemplateText; }
+	static wxString GetParserCommand() { return mParserCommand; }
+	static wxColour GetCommentColour() { return mCommentColour; }
+	static wxColour GetIncludeColour() { return mIncludeColour; }
+	static wxColour GetCapColour() 	{ return mCapColour; }
+	static wxColour GetPathColour() { return mPathColour; }
+	static wxColour GetPermColour() { return mPermColour; }
+	static wxFont GetCapabilityFont() { return mCapabilityFont; }
+	static wxFont GetCommentFont() { return mCommentFont; }
+	static wxFont GetIncludeFont() { return mIncludeFont; }
+	static wxFont GetPathFont() { return mPathFont; }
+	static wxFont GetPermFont() { return mPermsFont; }
+	static wxSize GetWindowSize() { return wxSize(mWindowWidth, mWindowHeight); }
+	static wxPoint GetWindowPos() { return wxPoint(mWindowX, mWindowY); }
+	static void WriteWindowSettings(const wxPoint &pos, const wxSize& size);
+
+	static void SetProfileDirectory(const wxString& profileDirectory) 
+					{ mProfileDirectory = profileDirectory; }
+	static void SetEditorExecutable(const wxString& executable) { mProfileEditorExecutable = executable; }
+	static void SetParserCommand(const wxString& parserCommand) { mParserCommand = parserCommand; }
+	static void SetTemplateText(const wxString& templateText) { mTemplateText = templateText; }
+	static void SetCommentColour(const wxColour& commentColour) { mCommentColour = commentColour; }
+	static void SetIncludeColour(const wxColour& includeColour) { mIncludeColour = includeColour; }
+	static void SetCapColour(const wxColour& capColour) { mCapColour = capColour; }
+	static void SetPathColour(const wxColour& pathColour) { mPathColour = pathColour; }
+	static void SetPermColour(const wxColour& permColour) { mPermColour = permColour; }
+	static void SetCapabilityFont(const wxFont& capabilityFont) { mCapabilityFont = capabilityFont; }
+	static void SetCommentFont(const wxFont& commentFont) { mCommentFont = commentFont; }
+	static void SetIncludeFont(const wxFont& includeFont) { mIncludeFont = includeFont; }
+	static void SetPathFont(const wxFont& pathFont) { mPathFont = pathFont; }
+	static void SetPermFont(const wxFont& permsFont) { mPermsFont = permsFont; }
+
+private:
+	static void		_WriteColour(const wxString& key, const wxColour& colour);
+	static wxColour		_ReadColour(const wxString& key, const wxColour& defaultColour);
+	static void		_ReadFont(const wxString& key, wxFont& font);
+	static wxString		mProfileDirectory;
+	static wxString		mProfileEditorExecutable;
+	static wxString		mParserCommand;
+	static wxString		mTemplateText;
+	static wxColour		mCommentColour;
+	static wxColour		mIncludeColour;
+	static wxColour		mCapColour;
+	static wxColour		mPathColour;
+	static wxColour		mPermColour;
+	static wxFont		mCapabilityFont;
+	static wxFont		mCommentFont;
+	static wxFont		mIncludeFont;
+	static wxFont		mPathFont;
+	static wxFont		mPermsFont;
+	static int		mWindowX; // These are just the settings from the 
+	static int		mWindowY; // config file, they are *NOT* updated 
+	static int		mWindowWidth; // in any size events
+	static int		mWindowHeight;
+
+};
+
+
+#endif
+

deprecated/management/profile-editor/src/Makefile.am

@@ -0,0 +1,24 @@
+# these are the headers for your project
+noinst_HEADERS = ProfileDirectoryTraverser.h ProfileTextCtrl.h Preferences.h \
+	AboutDialog.h opensuse_logo.xpm SearchAllProfiles.h Configuration.h
+
+#########################################################################
+# APPLICATION SECTION
+#########################################################################
+# this is the program that gets installed.  it's name is used for all
+# of the other Makefile.am variables
+bin_PROGRAMS = profileeditor
+
+# the application source, library search path, and link libraries
+profileeditor_SOURCES = ProfileTextCtrl.cpp Preferences.cpp AboutDialog.cpp \
+	SearchAllProfiles.cpp Configuration.cpp profileeditor.cpp
+profileeditor_LDFLAGS = $(WX_LIBS) 
+
+
+
+SUBDIRS = wxStyledTextCtrl
+profileeditor_LDADD =\
+	$(top_builddir)/src/wxStyledTextCtrl/libAppArmorStyledTextCtrl.a
+
+AM_CXXFLAGS = \
+	-DHELP_FILE_LOCATION=\"$(datadir)/doc/@PACKAGE@/AppArmorProfileEditor.htb\"

deprecated/management/profile-editor/src/Preferences.cpp

@@ -0,0 +1,322 @@
+/*	AppArmor Profile Editor (C) 2006 Novell, Inc.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ * 
+ */
+
+#include "wx/wxprec.h"
+
+#ifndef WX_PRECOMP
+#include "wx/wx.h"
+#endif
+
+#include <wx/propdlg.h>
+#include <wx/config.h>
+#include <wx/colordlg.h>
+#include <wx/fontdlg.h>
+
+#include "Configuration.h"
+#include "ProfileTextCtrl.h"
+#include "Preferences.h"
+
+IMPLEMENT_DYNAMIC_CLASS(PreferencesDialog, wxDialog)
+
+BEGIN_EVENT_TABLE(PreferencesDialog, wxDialog)
+	EVT_BUTTON(ID_COMMENT_COLOUR_BUTTON, PreferencesDialog::OnColourButton)
+	EVT_BUTTON(ID_INCLUDES_COLOUR_BUTTON, PreferencesDialog::OnColourButton)
+	EVT_BUTTON(ID_PERMS_COLOUR_BUTTON, PreferencesDialog::OnColourButton)
+	EVT_BUTTON(ID_CAPABILITIES_COLOUR_BUTTON, PreferencesDialog::OnColourButton)
+	EVT_BUTTON(ID_PATHS_COLOUR_BUTTON, PreferencesDialog::OnColourButton)
+	EVT_BUTTON(ID_COMMENT_FONT_BUTTON, PreferencesDialog::OnFontButton)
+	EVT_BUTTON(ID_INCLUDES_FONT_BUTTON, PreferencesDialog::OnFontButton)
+	EVT_BUTTON(ID_CAPABILITIES_FONT_BUTTON, PreferencesDialog::OnFontButton)
+	EVT_BUTTON(ID_PATHS_FONT_BUTTON, PreferencesDialog::OnFontButton)
+	EVT_BUTTON(ID_PERMS_FONT_BUTTON, PreferencesDialog::OnFontButton)
+END_EVENT_TABLE()
+
+PreferencesDialog::PreferencesDialog( )
+{
+}
+
+PreferencesDialog::PreferencesDialog(wxWindow* parent, 
+					wxWindowID id, 
+					const wxString& caption, 
+					const wxPoint& pos, 
+					const wxSize& size,
+					long style)
+{
+    Create(parent, id, caption, pos, size, style);
+}
+
+bool PreferencesDialog::Create(wxWindow* parent,
+				wxWindowID id,
+				const wxString& caption,
+				const wxPoint& pos,
+				const wxSize& size,
+				long style)
+{
+	mpPrefsNotebook = NULL;
+	mpProfileDir = NULL;
+	mpParserCommand = NULL;
+	mpTemplateTextCtrl = NULL;
+	mpCommentsButton = NULL;
+	mpIncludesButton = NULL;
+	mpPermsButton = NULL;
+	mpCapabilitiesButton = NULL;
+	mpPathsButton = NULL;
+	mpCommentsFontButton = NULL;
+	mpIncludesFontButton = NULL;
+	mpCapabilitiesFontButton = NULL;
+	mpPathsFontButton = NULL;
+	
+	
+	SetExtraStyle(GetExtraStyle()|wxWS_EX_BLOCK_EVENTS);
+	wxDialog::Create( parent, id, caption, pos, size, style );
+	
+	CreateControls();
+	GetSizer()->Fit(this);
+	GetSizer()->SetSizeHints(this);
+	Centre();
+	
+	return true;
+}
+
+void PreferencesDialog::CreateControls()
+{    
+	wxBoxSizer* mainSizer = new wxBoxSizer(wxVERTICAL);
+	SetSizer(mainSizer);
+	
+	mpPrefsNotebook = new wxNotebook(this, ID_PREFERENCES_NOTEBOOK, wxDefaultPosition, wxDefaultSize, wxNB_TOP );
+	
+	// The paths pane
+	wxPanel* pathsPanel = new wxPanel( mpPrefsNotebook, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxSUNKEN_BORDER|wxTAB_TRAVERSAL );
+	wxGridSizer* prefsGridSizer = new wxGridSizer(2, 2, 0, 0);
+	pathsPanel->SetSizer(prefsGridSizer);
+	
+	wxStaticText* profileDirectoryText = new wxStaticText( pathsPanel, wxID_ANY, _("Profile Directory:"), wxDefaultPosition, wxDefaultSize, 0 );
+	prefsGridSizer->Add(profileDirectoryText, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxALL|wxADJUST_MINSIZE, 5);
+	
+	mpProfileDir = new wxTextCtrl( pathsPanel, wxID_ANY, Configuration::GetProfileDirectory(), wxDefaultPosition, wxSize(200, -1), 0 );
+	prefsGridSizer->Add(mpProfileDir, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxALL, 5);
+	
+	wxStaticText* parserCommandText = new wxStaticText( pathsPanel, wxID_ANY, _("Path to apparmor_parser:"), wxDefaultPosition, wxDefaultSize, 0 );
+	prefsGridSizer->Add(parserCommandText, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxALL|wxADJUST_MINSIZE, 5);
+	
+	mpParserCommand = new wxTextCtrl( pathsPanel, wxID_ANY, Configuration::GetParserCommand(), wxDefaultPosition, wxSize(200, -1), 0 );
+	prefsGridSizer->Add(mpParserCommand, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxALL, 5);
+	
+	mpPrefsNotebook->AddPage(pathsPanel, _("Paths"));
+	
+	// The colours pane //
+	wxPanel* coloursPanel = new wxPanel( mpPrefsNotebook, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxSUNKEN_BORDER|wxTAB_TRAVERSAL );
+	wxBoxSizer* colorFontBoxSizer = new wxBoxSizer(wxHORIZONTAL);
+	coloursPanel->SetSizer(colorFontBoxSizer);
+	
+	wxStaticBox* colourBoxSizer = new wxStaticBox(coloursPanel, wxID_ANY, _("Colours"));
+	wxStaticBoxSizer* colourStaticBoxSizer = new wxStaticBoxSizer(colourBoxSizer, wxVERTICAL);
+	colorFontBoxSizer->Add(colourStaticBoxSizer, 0, wxALIGN_CENTER_VERTICAL|wxALL, 5);
+	wxGridSizer* colourSubSizer = new wxGridSizer(4, 2, 0, 0);
+	colourStaticBoxSizer->Add(colourSubSizer, 0, wxALIGN_CENTER_HORIZONTAL|wxALL, 5);
+	wxStaticText* commentsText = new wxStaticText( coloursPanel, wxID_STATIC, _("Comments"), wxDefaultPosition, wxDefaultSize, 0 );
+	colourSubSizer->Add(commentsText, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxALL|wxADJUST_MINSIZE, 5);
+	
+	mpCommentsButton = new wxButton( coloursPanel, ID_COMMENT_COLOUR_BUTTON, _T(""), wxDefaultPosition, wxDefaultSize, 0 );
+	mpCommentsButton->SetBackgroundColour(Configuration::GetCommentColour());
+	colourSubSizer->Add(mpCommentsButton, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxALL, 5);
+	
+	wxStaticText* includesText = new wxStaticText( coloursPanel, wxID_STATIC, _("Includes"), wxDefaultPosition, wxDefaultSize, 0 );
+	colourSubSizer->Add(includesText, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxALL|wxADJUST_MINSIZE, 5);
+	
+	mpIncludesButton = new wxButton( coloursPanel, ID_INCLUDES_COLOUR_BUTTON, _T(""), wxDefaultPosition, wxDefaultSize, 0 );
+	colourSubSizer->Add(mpIncludesButton, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxALL, 5);
+	mpIncludesButton->SetBackgroundColour(Configuration::GetIncludeColour());
+
+	wxStaticText* capabilitiesText = new wxStaticText( coloursPanel, wxID_STATIC, _("Capabilities"), wxDefaultPosition, wxDefaultSize, 0 );
+	colourSubSizer->Add(capabilitiesText, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxALL|wxADJUST_MINSIZE, 5);
+	
+	mpCapabilitiesButton = new wxButton( coloursPanel, ID_CAPABILITIES_COLOUR_BUTTON, _T(""), wxDefaultPosition, wxDefaultSize, 0 );
+	colourSubSizer->Add(mpCapabilitiesButton, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxALL, 5);
+	mpCapabilitiesButton->SetBackgroundColour(Configuration::GetCapColour());
+
+	wxStaticText* pathsText = new wxStaticText( coloursPanel, wxID_STATIC, _("Paths"), wxDefaultPosition, wxDefaultSize, 0 );
+	colourSubSizer->Add(pathsText, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxALL|wxADJUST_MINSIZE, 5);
+	
+	mpPathsButton = new wxButton( coloursPanel, ID_PATHS_COLOUR_BUTTON, _T(""), wxDefaultPosition, wxDefaultSize, 0 );
+	mpPathsButton->SetBackgroundColour(Configuration::GetPathColour());
+	colourSubSizer->Add(mpPathsButton, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxALL, 5);
+	
+	wxStaticText* permsText = new wxStaticText( coloursPanel, wxID_STATIC, _("Permissions"), wxDefaultPosition, wxDefaultSize, 0 );
+	colourSubSizer->Add(permsText, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxALL|wxADJUST_MINSIZE, 5);
+
+	mpPermsButton = new wxButton( coloursPanel, ID_PERMS_COLOUR_BUTTON, _T(""), wxDefaultPosition, wxDefaultSize, 0 );
+	mpPermsButton->SetBackgroundColour(Configuration::GetPermColour());
+	colourSubSizer->Add(mpPermsButton, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxALL, 5);
+
+	// Fonts pane //
+	wxStaticBox* fontSubSizer = new wxStaticBox(coloursPanel, wxID_ANY, _("Fonts"));
+	wxStaticBoxSizer* fontBoxSizer = new wxStaticBoxSizer(fontSubSizer, wxVERTICAL);
+	colorFontBoxSizer->Add(fontBoxSizer, 0, wxALIGN_CENTER_VERTICAL|wxALL, 5);
+	wxGridSizer* fontsGridSizer = new wxGridSizer(4, 2, 0, 0);
+	fontBoxSizer->Add(fontsGridSizer, 0, wxALIGN_CENTER_HORIZONTAL|wxALL, 5);
+	wxStaticText* commentFontText = new wxStaticText( coloursPanel, wxID_STATIC, _("Comments"), wxDefaultPosition, wxDefaultSize, 0 );
+	fontsGridSizer->Add(commentFontText, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxALL|wxADJUST_MINSIZE, 5);
+	
+	mpCommentsFontButton = new wxButton( coloursPanel, ID_COMMENT_FONT_BUTTON, _("ABCdef"), wxDefaultPosition, wxDefaultSize, 0 );
+	mpCommentsFontButton->SetFont(Configuration::GetCommentFont());
+	fontsGridSizer->Add(mpCommentsFontButton, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxALL, 5);
+	
+	wxStaticText* includesFontText = new wxStaticText( coloursPanel, wxID_STATIC, _("Includes"), wxDefaultPosition, wxDefaultSize, 0 );
+	fontsGridSizer->Add(includesFontText, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxALL|wxADJUST_MINSIZE, 5);
+	
+	mpIncludesFontButton = new wxButton( coloursPanel, ID_INCLUDES_FONT_BUTTON, _("ABCdef"), wxDefaultPosition, wxDefaultSize, 0 );
+	mpIncludesFontButton->SetFont(Configuration::GetIncludeFont());
+	fontsGridSizer->Add(mpIncludesFontButton, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxALL, 5);
+	
+	wxStaticText* capabilitiesFontText = new wxStaticText( coloursPanel, wxID_STATIC, _("Capabilities"), wxDefaultPosition, wxDefaultSize, 0 );
+	fontsGridSizer->Add(capabilitiesFontText, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxALL|wxADJUST_MINSIZE, 5);
+	
+	mpCapabilitiesFontButton = new wxButton( coloursPanel, ID_CAPABILITIES_FONT_BUTTON, _("ABCdef"), wxDefaultPosition, wxDefaultSize, 0 );
+	mpCapabilitiesFontButton->SetFont(Configuration::GetCapabilityFont());
+	fontsGridSizer->Add(mpCapabilitiesFontButton, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxALL, 5);
+	
+	wxStaticText* pathsFontText = new wxStaticText( coloursPanel, wxID_STATIC, _("Paths"), wxDefaultPosition, wxDefaultSize, 0 );
+	fontsGridSizer->Add(pathsFontText, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxALL|wxADJUST_MINSIZE, 5);
+	
+	mpPathsFontButton = new wxButton( coloursPanel, ID_PATHS_FONT_BUTTON, _("ABCdef"), wxDefaultPosition, wxDefaultSize, 0 );
+	mpPathsFontButton->SetFont(Configuration::GetPathFont());
+	fontsGridSizer->Add(mpPathsFontButton, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxALL, 5);
+	
+	wxStaticText* permsFontText = new wxStaticText( coloursPanel, wxID_STATIC, _("Permissions"), wxDefaultPosition, wxDefaultSize, 0 );
+	fontsGridSizer->Add(permsFontText, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxALL|wxADJUST_MINSIZE, 5);
+	
+	mpPermsFontButton = new wxButton( coloursPanel, ID_PERMS_FONT_BUTTON, _("ABCdef"), wxDefaultPosition, wxDefaultSize, 0 );
+	mpPermsFontButton->SetFont(Configuration::GetPermFont());
+	fontsGridSizer->Add(mpPermsFontButton, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxALL, 5);
+	mpPrefsNotebook->AddPage(coloursPanel, _("Colours & Fonts"));
+
+	// Templates pane //	
+	mpTemplateTextCtrl = new ProfileTextCtrl (mpPrefsNotebook, wxID_ANY, wxDefaultPosition, wxDefaultSize);
+	mpTemplateTextCtrl->SetText(Configuration::GetTemplateText());
+	mpPrefsNotebook->AddPage(mpTemplateTextCtrl, _("New Profile Template"));
+	mainSizer->Add(mpPrefsNotebook, 0, wxALIGN_CENTER_HORIZONTAL|wxALL, 5);
+	wxBoxSizer* buttonBoxSizer = new wxBoxSizer(wxHORIZONTAL);
+	mainSizer->Add(buttonBoxSizer, 0, wxALIGN_CENTER_HORIZONTAL|wxALL, 5);
+	
+	wxStdDialogButtonSizer* buttonSizer = new wxStdDialogButtonSizer;
+	buttonBoxSizer->Add(buttonSizer, 0, wxALIGN_CENTER_VERTICAL|wxALL, 5);
+	wxButton* okButton = new wxButton( this, wxID_OK, _("&OK"), wxDefaultPosition, wxDefaultSize, 0 );
+	buttonSizer->AddButton(okButton);
+
+	wxButton* cancelButton = new wxButton( this, wxID_CANCEL, _("&Cancel"), wxDefaultPosition, wxDefaultSize, 0 );
+	buttonSizer->AddButton(cancelButton);	
+	buttonSizer->Realize();
+}
+
+void PreferencesDialog::OnColourButton(wxCommandEvent &event)
+{	
+	wxColourData currentData;
+	switch (event.GetId())
+	{
+		case ID_COMMENT_COLOUR_BUTTON:
+			currentData.SetColour(mpCommentsButton->GetBackgroundColour());
+			break;
+		case ID_INCLUDES_COLOUR_BUTTON:
+			currentData.SetColour(mpIncludesButton->GetBackgroundColour());
+			break;
+		case ID_CAPABILITIES_COLOUR_BUTTON:
+			currentData.SetColour(mpCapabilitiesButton->GetBackgroundColour());
+			break;
+		case ID_PATHS_COLOUR_BUTTON:
+			currentData.SetColour(mpPathsButton->GetBackgroundColour());
+			break;
+		case ID_PERMS_COLOUR_BUTTON:
+			currentData.SetColour(mpPermsButton->GetBackgroundColour());
+			break;
+		default:
+			currentData.SetColour(*wxWHITE);
+			break;
+	}
+	wxColourDialog *colourPicker = new wxColourDialog(this, &currentData);
+	if (colourPicker->ShowModal() == wxID_OK)
+	{
+		currentData = colourPicker->GetColourData();
+		wxColour currentColour = currentData.GetColour();
+		switch (event.GetId())
+		{
+			case ID_COMMENT_COLOUR_BUTTON:
+		 		mpCommentsButton->SetBackgroundColour(currentColour);
+				break;
+			case ID_INCLUDES_COLOUR_BUTTON:	
+		 		mpIncludesButton->SetBackgroundColour(currentColour);
+				break;
+			case ID_CAPABILITIES_COLOUR_BUTTON:
+ 				mpCapabilitiesButton->SetBackgroundColour(currentColour);
+				break;
+			case ID_PATHS_COLOUR_BUTTON:
+		 		mpPathsButton->SetBackgroundColour(currentColour);
+				break;
+			case ID_PERMS_COLOUR_BUTTON:
+				mpPermsButton->SetBackgroundColour(currentColour);
+				break;
+			default:
+				break;
+		}
+	}
+	colourPicker->Destroy();
+}
+void PreferencesDialog::OnFontButton(wxCommandEvent &event)
+{
+
+	wxFontData fontData;
+	switch (event.GetId())
+	{
+		case ID_COMMENT_FONT_BUTTON:
+			fontData.SetInitialFont(mpCommentsFontButton->GetFont());
+			break;
+		case ID_INCLUDES_FONT_BUTTON:
+			fontData.SetInitialFont(mpIncludesFontButton->GetFont());
+			break;
+		case ID_CAPABILITIES_FONT_BUTTON:
+			fontData.SetInitialFont(mpCapabilitiesFontButton->GetFont());
+			break;
+		case ID_PATHS_FONT_BUTTON:
+			fontData.SetInitialFont(mpPathsFontButton->GetFont());
+			break;
+		case ID_PERMS_FONT_BUTTON:
+			fontData.SetInitialFont(mpPermsFontButton->GetFont());
+			break;
+		default:
+			break;
+	}
+	wxFontDialog *fontDialog = new wxFontDialog(this, fontData);
+	if (fontDialog->ShowModal() == wxID_OK)
+	{
+ 		fontData = fontDialog->GetFontData();
+ 		wxFont newFont = fontData.GetChosenFont();
+		// Write it back to disk
+		switch (event.GetId())
+		{
+			case ID_COMMENT_FONT_BUTTON:
+		 		mpCommentsFontButton->SetFont(newFont);
+				break;
+			case ID_INCLUDES_FONT_BUTTON:	
+		 		mpIncludesFontButton->SetFont(newFont);
+				break;
+			case ID_CAPABILITIES_FONT_BUTTON:
+ 				mpCapabilitiesFontButton->SetFont(newFont);
+				break;
+			case ID_PATHS_FONT_BUTTON:
+		 		mpPathsFontButton->SetFont(newFont);
+				break;
+			case ID_PERMS_FONT_BUTTON:
+				mpPermsFontButton->SetFont(newFont);
+				break;
+			default:
+				break;
+		}
+	}
+	fontDialog->Destroy();
+}

deprecated/management/profile-editor/src/Preferences.h

@@ -0,0 +1,102 @@
+#ifndef PREFERENCES_H
+#define PREFERENCES_H
+
+#include <wx/notebook.h>
+
+#define CONFIG_NAME "AppArmorProfileEditor"
+#define DEFAULT_COMMENT_COLOUR_R 31
+#define DEFAULT_COMMENT_COLOUR_G 31
+#define DEFAULT_COMMENT_COLOUR_B 210
+#define DEFAULT_INCLUDE_COLOUR_R 56
+#define DEFAULT_INCLUDE_COLOUR_G 136
+#define DEFAULT_INCLUDE_COLOUR_B 31
+#define DEFAULT_CAP_COLOUR_R 229
+#define DEFAULT_CAP_COLOUR_G 33
+#define DEFAULT_CAP_COLOUR_B 204
+#define DEFAULT_PATH_COLOUR_R 1
+#define DEFAULT_PATH_COLOUR_G 1
+#define DEFAULT_PATH_COLOUR_B 1
+#define DEFAULT_PERM_COLOUR_R 160
+#define DEFAULT_PERM_COLOUR_G 32
+#define DEFAULT_PERM_COLOUR_B 240
+
+enum
+{
+	ID_COMMENT_COLOUR_BUTTON,
+	ID_PERMS_COLOUR_BUTTON,
+	ID_INCLUDES_COLOUR_BUTTON,
+	ID_CAPABILITIES_COLOUR_BUTTON,
+	ID_PATHS_COLOUR_BUTTON,
+	ID_COMMENT_FONT_BUTTON,
+	ID_PERMS_FONT_BUTTON,
+	ID_INCLUDES_FONT_BUTTON,
+	ID_CAPABILITIES_FONT_BUTTON,
+	ID_PATHS_FONT_BUTTON,
+	ID_PREFERENCES_NOTEBOOK,
+};
+
+/**
+ * The preferences dialog
+ */
+class PreferencesDialog: public wxDialog
+{    
+	DECLARE_DYNAMIC_CLASS( PreferencesDialog )
+	DECLARE_EVENT_TABLE()
+
+	public:
+
+		PreferencesDialog();
+		PreferencesDialog(wxWindow* parent, 
+				wxWindowID id, 
+				const wxString& caption = _("Preferences"), 
+				const wxPoint& pos = wxDefaultPosition, 
+				const wxSize& size = wxSize(400, 300), 
+				long style = wxCAPTION|wxRESIZE_BORDER|wxSYSTEM_MENU|wxCLOSE_BOX);
+		bool Create(wxWindow* parent, 
+				wxWindowID, 
+				const wxString& caption = _("Preferences"), 
+				const wxPoint& pos = wxDefaultPosition, 
+				const wxSize& size = wxSize(400, 300), 
+				long style = wxCAPTION|wxRESIZE_BORDER|wxSYSTEM_MENU|wxCLOSE_BOX );
+		void CreateControls();
+		wxString BestGuessProfileDirectory ();
+		wxString BestGuessParserCommand ();
+		
+		// Event handlers
+		void OnColourButton(wxCommandEvent &event);
+		void OnFontButton (wxCommandEvent &event);
+
+		// Various accessor functions so we can save the data
+		wxColour GetCommentButtonColour(void) { return mpCommentsButton->GetBackgroundColour(); }
+		wxColour GetIncludeButtonColour(void) { return mpIncludesButton->GetBackgroundColour(); }
+		wxColour GetCapabilityButtonColour(void) { return mpCapabilitiesButton->GetBackgroundColour(); }
+		wxColour GetPathButtonColour(void) { return mpPathsButton->GetBackgroundColour(); }
+		wxColour GetPermButtonColour(void) { return mpPermsButton->GetBackgroundColour(); }
+		wxFont GetCommentButtonFont(void) { return mpCommentsFontButton->GetFont(); }
+		wxFont GetIncludeButtonFont(void) { return mpIncludesFontButton->GetFont(); }
+		wxFont GetPathButtonFont(void) { return mpPathsFontButton->GetFont(); }
+		wxFont GetCapabilityButtonFont(void) { return mpCapabilitiesFontButton->GetFont(); }
+		wxFont GetPermButtonFont(void) { return mpPermsFontButton->GetFont(); }
+		wxString GetProfileDir(void) { return mpProfileDir->GetValue(); }
+		wxString GetParser(void) { return mpParserCommand->GetValue(); }
+		wxString GetTemplateText(void) { return mpTemplateTextCtrl->GetText(); }
+	private:
+		wxNotebook*	mpPrefsNotebook;
+		wxTextCtrl*	mpProfileDir;
+		wxTextCtrl*	mpParserCommand;
+		ProfileTextCtrl* mpTemplateTextCtrl;
+		wxButton*	mpCommentsButton;
+		wxButton* 	mpIncludesButton;
+		wxButton* 	mpPermsButton;
+		wxButton* 	mpCapabilitiesButton;
+		wxButton* 	mpPathsButton;
+		wxButton* 	mpCommentsFontButton;
+		wxButton* 	mpIncludesFontButton;
+		wxButton* 	mpCapabilitiesFontButton;
+		wxButton* 	mpPathsFontButton;
+		wxButton* 	mpPermsFontButton;
+};
+
+#endif
+
+

deprecated/management/profile-editor/src/ProfileDirectoryTraverser.h

@@ -0,0 +1,43 @@
+#ifndef PROFILE_DIRECTORY_TRAVERSER
+#define PROFILE_DIRECTORY_TRAVERSER
+
+/**
+ * The wxDirTraverser that searches through the profile directory
+ */
+class ProfileDirectoryTraverser : public wxDirTraverser
+{
+	public:
+		ProfileDirectoryTraverser(wxTreeCtrl* profileTree,
+						const wxTreeItemId& startNode,
+						const wxString& profileDirectory) 
+							: mpProfileTree(profileTree),
+							  mCurNode(startNode),
+							  mOriginalNode(startNode),
+							  mProfileDirectory(profileDirectory) {}
+
+		virtual wxDirTraverseResult OnFile(const wxString& filename)
+		{
+			ProfileTreeData* data = new ProfileTreeData(filename);
+			// OnDir isn't called when the traverser starts
+			// going through the files in the top level directory,
+			// so we do this to keep the profiles in the right place
+			if (wxFileName(filename).GetPath() == mProfileDirectory)
+				mCurNode = mOriginalNode;
+ 			mpProfileTree->AppendItem(mCurNode, wxFileName(filename).GetFullName(), -1, -1, data);
+			return wxDIR_CONTINUE;
+		}
+
+		 virtual wxDirTraverseResult OnDir(const wxString& dirname)
+		{
+			mCurNode = mpProfileTree->AppendItem(mOriginalNode, wxFileName(dirname).GetName());
+			return wxDIR_CONTINUE;
+		}
+	private:
+		wxTreeCtrl*	mpProfileTree;
+		wxTreeItemId	mCurNode, mOriginalNode;
+		wxString 	mProfileDirectory;
+};
+
+
+#endif
+

deprecated/management/profile-editor/src/ProfileTextCtrl.cpp

@@ -0,0 +1,115 @@
+/*	AppArmor Profile Editor (C) 2006 Novell, Inc.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ * 
+ */
+#include "wx/wxprec.h"
+
+#ifndef WX_PRECOMP
+#include "wx/wx.h"
+#endif
+
+#include <wx/textctrl.h>
+#include <wx/textfile.h>
+#include <wx/config.h>
+#include "ProfileTextCtrl.h"
+#include "Preferences.h"
+#include "Configuration.h"
+
+BEGIN_EVENT_TABLE(ProfileTextCtrl, wxStyledTextCtrl)
+	EVT_STC_CHANGE(ID_STYLED_PROFILE_WINDOW, ProfileTextCtrl::OnModified)
+END_EVENT_TABLE()
+
+ProfileTextCtrl::ProfileTextCtrl(wxWindow *parent, wxWindowID id,
+				const wxPoint &pos,
+				const wxSize &size,
+				long style)
+		:  wxStyledTextCtrl (parent, id, pos, size, style|wxTE_WORDWRAP|wxTE_MULTILINE|wxTE_PROCESS_ENTER)
+{
+	mpParentWindow = parent;
+	SetLexer(wxSTC_LEX_APPARMOR);
+	StyleClearAll();
+	RefreshColoursAndFonts();
+	mNeedSaving = false;
+	mIsNew = false;
+}
+
+/**
+ * Loads a file from disk
+ * @param filename The file to load
+ * @return true on success, false on failure
+ */
+bool ProfileTextCtrl::LoadFile(const wxString& filename)
+{
+	wxTextFile file;
+	wxString currentLine;
+
+	if (!file.Open(filename))
+		return false;
+
+	mIgnoreChanges = true; // Have OnModified ignore the events from loading the file
+	Clear();
+	mFilename = filename;	
+	wxStyledTextCtrl::LoadFile(filename);
+	mIgnoreChanges = false;
+
+	mNeedSaving = false;
+	mIsNew = false;
+	return true;
+}
+
+/**
+ * Event handler triggered by any change in the window
+ * @param event 
+ */
+void ProfileTextCtrl::OnModified(wxStyledTextEvent &event)
+{
+	if (!mIgnoreChanges)
+	{
+		mNeedSaving = true;
+		wxPostEvent(mpParentWindow, event);	
+	}
+}
+
+/**
+ * Reloads the syntax colouring and fonts
+ * @param  
+ */
+void ProfileTextCtrl::RefreshColoursAndFonts(void)
+{
+	wxColour yellowColour(252,253,127);
+	wxFont defaultFont (10, wxFONTFAMILY_DEFAULT, wxFONTSTYLE_NORMAL, wxFONTWEIGHT_NORMAL);
+	wxFont commentFont = Configuration::GetCommentFont();
+	wxFont includeFont = Configuration::GetIncludeFont();
+	wxFont capabilityFont = Configuration::GetCapabilityFont();
+	wxFont permFont = Configuration::GetPermFont();
+	wxFont pathFont = Configuration::GetPathFont();
+
+	StyleSetFont (wxSTC_STYLE_DEFAULT, defaultFont);
+	StyleSetForeground (wxSTC_STYLE_DEFAULT, *wxBLACK);
+	StyleSetBackground (wxSTC_STYLE_DEFAULT, *wxWHITE);
+	StyleSetFont (wxSTC_APPARMOR_COMMENT, commentFont);
+	StyleSetForeground (wxSTC_APPARMOR_COMMENT, Configuration::GetCommentColour());
+	StyleSetBackground (wxSTC_APPARMOR_COMMENT, *wxWHITE);
+	StyleSetFont (wxSTC_APPARMOR_INCLUDE, includeFont);
+	StyleSetForeground (wxSTC_APPARMOR_INCLUDE, Configuration::GetIncludeColour());
+	StyleSetBackground (wxSTC_APPARMOR_INCLUDE, *wxWHITE);
+	StyleSetFont (wxSTC_APPARMOR_CAPABILITY, capabilityFont);
+	StyleSetForeground (wxSTC_APPARMOR_CAPABILITY, Configuration::GetCapColour());
+	StyleSetBackground (wxSTC_APPARMOR_CAPABILITY, *wxWHITE);
+	StyleSetFont (wxSTC_APPARMOR_PATH, pathFont);
+	StyleSetForeground (wxSTC_APPARMOR_PATH, Configuration::GetPathColour());
+	StyleSetBackground (wxSTC_APPARMOR_PATH, *wxWHITE);
+	StyleSetFont (wxSTC_APPARMOR_PERMS, permFont);
+	StyleSetForeground (wxSTC_APPARMOR_PERMS, Configuration::GetPermColour());
+	StyleSetBackground (wxSTC_APPARMOR_PERMS, *wxWHITE);
+	StyleSetForeground (wxSTC_STYLE_BRACELIGHT, *wxBLACK);
+	StyleSetBackground (wxSTC_STYLE_BRACELIGHT, yellowColour);
+	StyleSetForeground (wxSTC_STYLE_BRACEBAD, *wxBLACK);
+	StyleSetBackground (wxSTC_STYLE_BRACEBAD, *wxRED);
+	SetCaretWidth(2);
+}
+

deprecated/management/profile-editor/src/ProfileTextCtrl.h

@@ -0,0 +1,44 @@
+#ifndef PROFILE_TEXT_CTRL_H
+#define PROFILE_TEXT_CTRL_H
+
+#include "wxStyledTextCtrl/stc.h"
+
+#define ID_STYLED_PROFILE_WINDOW 13082
+
+/**
+ * The syntax highlighting text control
+ */
+class ProfileTextCtrl : public wxStyledTextCtrl
+{
+
+public:
+		ProfileTextCtrl (wxWindow *parent, 
+				wxWindowID id = wxID_ANY,
+				const wxPoint &pos = wxDefaultPosition,
+				const wxSize &size = wxDefaultSize,
+				long style = wxSUNKEN_BORDER | wxVSCROLL);
+
+		bool LoadFile(const wxString &filename);
+		void ProcessLine(const wxString &currentLine);
+		void RefreshColoursAndFonts();
+
+		void OnModified(wxStyledTextEvent &event);
+		void OnReturnKey(wxCommandEvent& event);
+
+		bool GetNeedSaving() { return mNeedSaving; }
+		void SetNeedSaving(bool status) { mNeedSaving = status; }	
+		wxString GetFileName() { return mFilename; }
+		void SetFileName(wxString fileName) { mFilename = fileName; }
+		void SetIsNew(bool status) { mIsNew = status; }
+		bool GetIsNew() { return mIsNew; }
+		void SetIgnoreChanges(bool value) { mIgnoreChanges = value; }
+private:
+		wxWindow *mpParentWindow;
+		wxString mFilename;
+		bool mNeedSaving;
+		bool mIsNew;
+		bool mIgnoreChanges;
+		DECLARE_EVENT_TABLE()
+};
+
+#endif

deprecated/management/profile-editor/src/SearchAllProfiles.cpp

@@ -0,0 +1,179 @@
+/*	AppArmor Profile Editor (C) 2006 Novell, Inc.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ * 
+ */
+
+#include "wx/wxprec.h"
+
+#ifndef WX_PRECOMP
+#include "wx/wx.h"
+#endif
+
+#include <wx/dir.h>
+#include <wx/ffile.h>
+#include <wx/busyinfo.h>
+#include <wx/process.h>
+#include "SearchAllProfiles.h"
+
+IMPLEMENT_DYNAMIC_CLASS(SearchAllProfilesDialog, wxDialog)
+
+BEGIN_EVENT_TABLE(SearchAllProfilesDialog, wxDialog)
+	EVT_BUTTON(ID_SEARCH_ALL_PROFILES_BUTTON, SearchAllProfilesDialog::OnSearch)
+	EVT_LISTBOX_DCLICK(ID_SEARCH_ALL_PROFILES_LIST_BOX, SearchAllProfilesDialog::OnListBoxDClick)
+END_EVENT_TABLE()
+
+SearchAllProfilesDialog::SearchAllProfilesDialog( )
+{
+}
+
+SearchAllProfilesDialog::SearchAllProfilesDialog(wxWindow* parent, 
+						wxWindowID id, 
+						const wxString& caption, 
+						const wxPoint& pos, 
+						const wxSize& size,
+						long style)
+{
+    Create(parent, id, caption, pos, size, style);
+}
+
+bool SearchAllProfilesDialog::Create(wxWindow* parent,
+					wxWindowID id,
+					const wxString& caption,
+					const wxPoint& pos,
+					const wxSize& size,
+					long style )
+{
+	mpSearchPhraseSizer = NULL;
+	mpSearchStaticText = NULL;
+	mpSearchPhraseTextCtrl = NULL;
+	mpSearchButton = NULL;
+	mpSearchResultsListBox = NULL;
+	mpOKButtonSizer = NULL;
+	mProfileDirectory = wxEmptyString;
+	mEditorExecutable = wxEmptyString;
+	mSearchedPhrase = wxEmptyString;
+
+	SetExtraStyle(GetExtraStyle() | wxWS_EX_BLOCK_EVENTS);
+	wxDialog::Create(parent, id, caption, pos, size, style);
+	
+	CreateControls();
+	GetSizer()->Fit(this);
+	GetSizer()->SetSizeHints(this);
+	Centre();
+	return true;
+}
+
+void SearchAllProfilesDialog::CreateControls()
+{    
+	wxBoxSizer* mainSizer = new wxBoxSizer(wxVERTICAL);
+	SetSizer(mainSizer);
+	
+	mpSearchPhraseSizer = new wxFlexGridSizer(1, 3, 0, 0);
+	mainSizer->Add(mpSearchPhraseSizer, 0, wxGROW|wxALL, 5);
+	
+	mpSearchStaticText = new wxStaticText(this, 
+						wxID_ANY,
+						_T("Search phrase:"),
+						wxDefaultPosition,
+						wxDefaultSize,
+						0);
+	mpSearchPhraseSizer->Add(mpSearchStaticText, 0, wxALIGN_LEFT|wxALIGN_CENTER_VERTICAL|wxALL|wxADJUST_MINSIZE, 5);
+	
+	mpSearchPhraseTextCtrl = new wxTextCtrl(this,
+						wxID_ANY,
+						_T(""),
+						wxDefaultPosition,
+						wxSize(300, -1),
+						0);
+	mpSearchPhraseSizer->Add(mpSearchPhraseTextCtrl, 0, wxGROW|wxALIGN_CENTER_VERTICAL|wxALL, 5);
+	
+	mpSearchButton = new wxButton(this,
+					ID_SEARCH_ALL_PROFILES_BUTTON,
+					_("Search"),
+					wxDefaultPosition,
+					wxDefaultSize,
+					0);
+	mpSearchPhraseSizer->Add(mpSearchButton, 0, wxALIGN_RIGHT|wxALIGN_CENTER_VERTICAL|wxALL, 5);
+	
+	mpSearchResultsListBox = new wxListBox(this,
+						ID_SEARCH_ALL_PROFILES_LIST_BOX,
+						wxDefaultPosition,
+						wxSize(-1, 200),
+						0,
+						NULL,
+						wxLB_SINGLE);
+	mainSizer->Add(mpSearchResultsListBox, 0, wxGROW|wxALL, 5);
+	
+	mpOKButtonSizer = new wxStdDialogButtonSizer;
+	mainSizer->Add(mpOKButtonSizer, 0, wxALIGN_CENTER_HORIZONTAL|wxALL, 5);
+	wxButton* okButton = new wxButton(this,
+					wxID_CANCEL,
+					_("&Cancel"),
+					wxDefaultPosition,
+					wxDefaultSize, 0);
+	mpOKButtonSizer->AddButton(okButton);
+	mpOKButtonSizer->Realize();
+}
+
+/**
+ * Event handler triggered by the Search button
+ * @param WXUNUSED( event ) 
+ */
+void SearchAllProfilesDialog::OnSearch(wxCommandEvent& WXUNUSED(event))
+{
+	mpSearchButton->Disable();
+	mpSearchResultsListBox->Clear();
+	mSearchedPhrase = mpSearchPhraseTextCtrl->GetValue();
+	DoSearch(mSearchedPhrase);
+	mpSearchButton->Enable();
+}
+
+/**
+ * Calls the directory traverser 
+ * @param searchString 
+ */
+void SearchAllProfilesDialog::DoSearch(const wxString& searchString)
+{
+	if (mProfileDirectory != wxEmptyString)
+	{
+		wxBusyInfo wait(_("Searching..."));
+		wxTheApp->Yield(); // Needed to repaint the busy window
+		SearchAllProfilesTraverser traverser(searchString, mpSearchResultsListBox);
+		wxDir dir (mProfileDirectory);
+		dir.Traverse(traverser,wxEmptyString);
+	}
+}
+
+/**
+ * A user has double clicked on a search result
+ * @param event 
+ */
+void SearchAllProfilesDialog::OnListBoxDClick (wxCommandEvent& event)
+{
+	wxString execString = mEditorExecutable;
+	execString.Append(_T(" "));
+	execString.Append(event.GetString());
+	execString.Append(_T(" \""));
+	execString.Append(mSearchedPhrase);
+	execString.Append(_T("\""));
+	wxProcess *proc = wxProcess::Open(execString);
+	if (proc == NULL)
+	{
+		wxMessageDialog *dlg = new wxMessageDialog(this, _("Could not exec!"), _("Error"), 
+								wxOK|wxICON_ERROR);
+		dlg->ShowModal();
+		dlg->Destroy();
+	}
+	else
+	{
+		proc->Detach();
+	}
+
+
+}
+
+

deprecated/management/profile-editor/src/SearchAllProfiles.h

@@ -0,0 +1,95 @@
+#ifndef _SEARCHALLPROFILESDIALOG_H_
+#define _SEARCHALLPROFILESDIALOG_H_
+
+
+class wxFlexGridSizer;
+class wxStdDialogButtonSizer;
+
+/**
+ * A "Search All Profiles" dialog
+ */
+class SearchAllProfilesDialog: public wxDialog
+{    
+    DECLARE_DYNAMIC_CLASS(SearchAllProfilesDialog)
+    DECLARE_EVENT_TABLE()
+
+public:
+	SearchAllProfilesDialog();
+	SearchAllProfilesDialog(wxWindow* parent, 
+				wxWindowID id = wxID_ANY, 
+				const wxString& caption = _("Search All Profiles"), 
+				const wxPoint& pos = wxDefaultPosition, 
+				const wxSize& size = wxSize(400, 300), 
+				long style = wxCAPTION|wxRESIZE_BORDER|wxSYSTEM_MENU|wxCLOSE_BOX);
+	
+	/// Creation
+	bool Create(wxWindow* parent, 
+			wxWindowID id = wxID_ANY, 
+			const wxString& caption = _("Search All Profiles"), 
+			const wxPoint& pos = wxDefaultPosition, 
+			const wxSize& size = wxSize(400, 300), 
+			long style = wxCAPTION|wxRESIZE_BORDER|wxSYSTEM_MENU|wxCLOSE_BOX );
+	void CreateControls();
+	void OnSearch(wxCommandEvent& event);
+	void OnListBoxDClick (wxCommandEvent& event);
+	void DoSearch(const wxString& searchString);
+
+
+	void SetProfileDirectory (const wxString& dir) { mProfileDirectory = dir; }
+	void SetEditorExecutable (const wxString& exec) { mEditorExecutable = exec; }
+	void SetSearchText (const wxString& searchString) { mpSearchPhraseTextCtrl->SetValue(searchString); }
+
+private:
+	wxFlexGridSizer*	mpSearchPhraseSizer;
+	wxStaticText*		mpSearchStaticText;
+	wxTextCtrl*		mpSearchPhraseTextCtrl;
+	wxButton*		mpSearchButton;
+	wxListBox*		mpSearchResultsListBox;
+	wxStdDialogButtonSizer*	mpOKButtonSizer;
+	wxString 		mProfileDirectory;
+	wxString 		mEditorExecutable;
+	wxString 		mSearchedPhrase;
+};
+
+/**
+ * The "Search All" traverser
+ */
+class SearchAllProfilesTraverser : public wxDirTraverser
+{
+	public:
+		SearchAllProfilesTraverser (const wxString& search, wxListBox *rBox) 
+							: searchString(search),
+							  resultsBox(rBox) {}
+		virtual wxDirTraverseResult OnFile(const wxString& filename)
+		{
+			if (!tmpFile.Open(filename))
+				return wxDIR_CONTINUE;
+
+			if (!tmpFile.ReadAll(&tmpString))
+				return wxDIR_CONTINUE;
+
+			if (tmpString.Find(searchString) != -1)
+				resultsBox->Append(filename);
+			tmpFile.Close();
+			return wxDIR_CONTINUE;
+		}
+
+		 virtual wxDirTraverseResult OnDir(const wxString& dirname)
+		{
+			return wxDIR_CONTINUE;
+		}
+	private:
+		wxString searchString;
+		wxListBox *resultsBox;
+		wxString tmpString;
+		wxFFile tmpFile;
+		
+};
+
+enum
+{
+	ID_SEARCH_ALL_PROFILES_BUTTON = 15599,
+	ID_SEARCH_ALL_PROFILES_LIST_BOX
+};
+
+#endif