It would be too easy if we could just call sorted(). Thanks to zone
grammar the most important key "type" gets sorted near end, so we pull
it up to the top using a hack.
It turns out the tree of dictionaries is not the best structure to
represent our grammar, unfortunatelly. The problem is that "zone" has
several context-dependent variants which change meaning of "zone" based
on inner field "type".
Redesigning the whole structure does not seem to be worth, so I settled
on this terrible hack.
The utility detects statements which use the same name (e.g.
max-zone-ttl) but use different grammar in different contexts. These
typically need special case in docs.
It transforms named.conf/rndc.conf grammar from text format into Python
dictionary. This allows granular access to grammar elements.
Beware: It heavity depens on cfg_test output format!
The next commit is going to add parser for ISC configuration format.
To simplify the parser the grammar files in doc/misc are no longer
line-wrapped as handling it would make the grammar parser unnecessairly
complicated.
This affects visible output in the ARM, but in the end we are going to
replace the auto-generated .rst files with grammar pretty printed, so
formatting of these files does not matter in practical terms.
The "glue-cache" option was marked as deprecated by commit
5ae33351f286feb25a965bf3c9e6b122ab495342 (first released in BIND 9.17.6,
back in October 2020), so now obsolete that option, removing all code
and documentation related to it.
Note: this causes the glue cache feature to be permanently enabled, not
disabled.
After some back and forth, it was decidede to match the configuration
option with unbound ("so-reuseport"), PowerDNS ("reuseport") and/or
nginx ("reuseport").
Previously, the option to enable kernel load balancing of the sockets
was always enabled when supported by the operating system (SO_REUSEPORT
on Linux and SO_REUSEPORT_LB on FreeBSD).
It was reported that in scenarios where the networking threads are also
responsible for processing long-running tasks (like RPZ processing, CATZ
processing or large zone transfers), this could lead to intermitten
brownouts for some clients, because the thread assigned by the operating
system might be busy. In such scenarious, the overall performance would
be better served by threads competing over the sockets because the idle
threads can pick up the incoming traffic.
Add new configuration option (`load-balance-sockets`) to allow enabling
or disabling the load balancing of the sockets.
Commit 4ca74eee49363a9c24c561a742f0abdd7f71d2a8 update the zone grammar
such that the zone statement is printed with the valid options per
zone type.
This commit is a follow-up, putting back the ZONE heading and adding
a note that these zone statements may also be put inside the view
statement.
It is tricky to actually print the zone statements inside
the view statement, and so we decided that we would add a note to say
that this is possible.
Building BIND 9 with older version of BIND 9 installed would result in
build failure. Fix the last two remaining cases where <prog>_CFLAGS was
being used leading to wrong order of the build flags on the command line.
the "zone" clause can be documented using, for instance,
`cfg_test --zonegrammar primary", which prints only
options that are valid in primary zones. this was not
the method being used when generating the named.conf
man page; instead, "zone" was documented with all possible
options, and no zone types at all.
this commit removes "zone" from the generic documentation
and adds include statements in named.conf.rst so that
correct zone grammars will be included in the man page.
"masters" and "default-masters" are now flagged so they will
not be included in the named.conf man page, despite being
accepted as valid options by the parser for backward
compatibiility.
The keep-response-order option has been introduced when TCP pipelining
has been introduced to BIND 9 as a failsafe for possibly non-compliant
clients.
Declare the keep-response-order obsolete as all DNS clients should
either support out-of-order processing or don't send more DNS queries
until the DNS response for the previous one has been received.
Replace the hard-coded paths for various BIND 9 files (configuration,
pid, etc.) in the man pages and ARM with compile-time values using the
sphinx-build replace system.
This is more complicated, because the restructured text specification
doesn't allow |substitions| inside ``code-blocks``, so for each specific
file we had to create own substition which is sub-optimal, but it is
only way how to do this without adding Sphinx extension.
Formerly parental-agents grammar was an exception and it did not
auto-generate itself from source code. From now on it is generated using
the same mechanism as other grammars.
For consistency with rest of the system, I've also renamed the grammar
file and the link anchors from "parentals" to "parental-agents".
Technically this is fixup for commit
0311705d4b36c536dd541b0b193bd01b68fe90b3.
Related: !5234
The missing `::` in the .rst files caused grammar section in docs to
render empty.
The `::` was accidentally removed in an unrelated commit
58bd26b6cf7bac3f614b6614cd2aff6075b6f9fa which was supposed to update
only copyright headers.
Fixes: #3120
As far as I can tell, it is some leftover from the times when Sphinx
docs were introduced (commit 9fb6d11abbdb10ded128f0ee5c004f24b4030ede).
It seems like it is not referenced from anywhere.
This commit converts the license handling to adhere to the REUSE
specification. It specifically:
1. Adds used licnses to LICENSES/ directory
2. Add "isc" template for adding the copyright boilerplate
3. Changes all source files to include copyright and SPDX license
header, this includes all the C sources, documentation, zone files,
configuration files. There are notes in the doc/dev/copyrights file
on how to add correct headers to the new files.
4. Handle the rest that can't be modified via .reuse/dep5 file. The
binary (or otherwise unmodifiable) files could have license places
next to them in <foo>.license file, but this would lead to cluttered
repository and most of the files handled in the .reuse/dep5 file are
system test files.
It's unclear if we are going to keep it or not, so let's mark it as
deprecated for a good measure. It's easier to un-deprecate it than the
other way around.
A number of DNS implementation produce NSEC records with bad type
maps that don't contain types that exist at the name leading to
NODATA responses being synthesize instead of the records in the
zone. NSEC records with these bad type maps often have the NSEC
NSEC field set to '\000.QNAME'. We look for the first label of
this pattern.
e.g.
example.com NSEC \000.example.com SOA NS NSEC RRSIG
example.com RRRSIG NSEC ...
example.com SOA ...
example.com RRRSIG SOA ...
example.com NS ...
example.com RRRSIG NS ...
example.com A ...
example.com RRRSIG A ...
A is missing from the type map.
This introduces a temporary option 'reject-000-label' to control
this behaviour.
'server <prefix> { broken-nsec yes; };' can now be used to stop
NSEC records from negative responses from servers in the given
prefix being cached and hence available to synth-from-dnssec.
This commit extends ACL syntax handling code with 'port' and
'transport' options. Currently, the extended syntax is available only
for allow-transfer options.
This commit disables the unused 'tls' clause options. For these some
backing code exists, but their values are not really used anywhere,
nor there are sufficient syntax tests for them.
These options are only disabled temporarily, until TLS certificate
verification gets implemented.
The new rules compare the target name in PTR and SRV records against
the machine name embedded in the kerberos principal. This can be
used to further restrict what PTR and SRV records can be added or
deleted via dynamic updates if desired.
Replace some "master/slave" terminology in the code with the preferred
"primary/secondary" keywords. This also changes user output such as
log messages, and fixes a typo ("seconary") in cfg_test.c.
There are still some references to "master" and "slave" for various
reasons:
- The old syntax can still be used as a synonym.
- The master syntax is kept when it refers to master files and formats.
- This commit replaces mainly keywords that are local. If "master" or
"slave" is used in for example a structure that is all over the
place, it is considered out of scope for the moment.
The documentation and feature-test were using '--with-idn' but the
configure script doesn't recognize this option. The correct option to
enable IDN support is '--with-libidn2'.
This commit adds the ability to enable or disable stateless TLS
session resumption tickets (see RFC5077). Having this ability is
twofold.
Firstly, these tickets are encrypted by the server, and the algorithm
might be weaker than the algorithm negotiated during the TLS session
establishment (it is in general the case for TLSv1.2, but the generic
principle applies to TLSv1.3 as well, despite it having better ciphers
for session tickets). Thus, they might compromise Perfect Forward
Secrecy.
Secondly, disabling it might be necessary if the same TLS key/cert
pair is supposed to be used by multiple servers to achieve, e.g., load
balancing because the session ticket by default gets generated in
runtime, while to achieve successful session resumption ability, in
this case, would have required using a shared key.
The proper alternative to having the ability to disable stateless TLS
session resumption tickets is to implement a proper session tickets
key rollover mechanism so that key rotation might be performed
often (e.g. once an hour) to not compromise forward secrecy while
retaining the associated performance benefits. That is much more work,
though. On the other hand, having the ability to disable session
tickets allows having a deployable configuration right now in the
cases when either forward secrecy is wanted or sharing the TLS
key/cert pair between multiple servers is needed (or both).
