There was a case where an primary server sent a response
on the wrong TCP connection and failure to check the question
section resulted in a truncated zone being served.
DS records only belong at delegation points and if present
at the zone apex are invariably the result of administrative
errors. Additionally they can't be queried for with modern
resolvers as the parent servers will be queried.
When creating the successor, the current active key (predecessor)
should change its goal state to HIDDEN.
Also add two useful debug logs in the keymgr_key_rollover function.
Catch a case where if the prepublication time of the successor key
is later than the retire time of the predecessor. If that is the
case we should prepublish as soon as possible, a.k.a. now.
The `dns_keymgr_run()` function became quite long, put the logic
that looks if a new key needs to be created (start a key rollover)
in a separate function.
The logic in `keymgr_key_has_successor(key, keyring)` is flawed, it
returns true if there is any key in the keyring that has a successor,
while what we really want here is to make sure that the given key
has a successor in the given keyring.
Rather than relying on `keymgr_key_exists_with_state`, walk the
list of keys in the keyring and check if the key is a successor of
the given predecessor key.
This improves keytime testing on CSK rollover. It now
tests for specific times, and also tests for SyncPublish and
Removed keytimes.
Since an "active key" for ZSK and KSK means something
different, this makes it tricky to decide when a CSK is
active. An "active key" intuitively means the key is signing
so we say a CSK is active when it is creating zone signatures.
This change means a lot of timings for the CSK rollover tests
need to be adjusted.
The keymgr code needs a slight change on calculating the
prepublication time: For a KSK we need to include the parent
registration delay, but for CSK we look at the zone signing
property and stick with the ZSK prepublication calculation.
Registration delay is not part of the Iret retire interval, thus
removed from the calculation when setting the Delete time metadata.
Include the registration delay in prepublication time, because
we need to prepublish the key sooner than just the Ipub
publication interval.
While kasp relies on key states to determine when a key needs to
be published or be used for signing, the keytimes are used by
operators to get some expectation of key publication and usage.
Update the code such that these keytimes are set appropriately.
That means:
- Print "PublishCDS" and "DeleteCDS" times in the state files.
- The keymgr sets the "Removed" and "PublishCDS" times and derives
those from the dnssec-policy.
- Tweak setting of the "Retired" time, when retiring keys, only
update the time to now when the retire time is not yet set, or is
in the future.
This also fixes a bug in "keymgr_transition_time" where we may wait
too long before zone signatrues become omnipresent or hidden. Not
only can we skip waiting the sign delay Dsgn if there is no
predecessor, we can also skip it if there is no successor.
Finally, this commit moves setting the lifetime, reducing two calls
to one.
in addition to being more efficient, this prevents a possible crash by
looking up the node name before the tree sructure can be changed when
cleaning up dead nodes in addrdataset().
Replace an existing comment with a more verbose explanation of when the
"hint" variable is set in resquery_send() and how its value affects the
advertised UDP buffer size in outgoing queries.
If "edns-udp-size" is set in a "server" block matching the queried
server, it is accounted for in the process of determining the advertised
UDP buffer size, but its value may still be overridden before the query
is sent. This behavior contradicts the ARM which claims that when set,
the server-specific "edns-udp-size" value is used for all EDNS queries
sent to a given server.
Furthermore, calling dns_peer_getudpsize() with the "udpsize" variable
as an argument makes the code hard to follow as that call may either
update the value of "udpsize" or leave it untouched.
Ensure the code matches the documentation by moving the
dns_peer_getudpsize() call below all other blocks of code potentially
affecting the advertised UDP buffer size, which is where it was located
when server-specific "edns-udp-size" support was first implemented [1].
Improve code readability by calling dns_peer_getudpsize() with a helper
variable instead of "udpsize".
[1] see commit 1c153afce5
When the DNS_FETCHOPT_EDNS512 flag was first introduced [1], it enforced
advertising a 512-byte UDP buffer size in an outgoing query. Ever since
EDNS processing code got updated [2], that flag has still been set upon
detection of certain query timeout patterns, but it has no longer been
affecting the calculations of the advertised UDP buffer size in outgoing
queries. Restore original semantic meaning of DNS_FETCHOPT_EDNS512 by
ensuring the advertised UDP buffer size is set to 512 bytes when that
flag is set. Update existing comments and add new ones to improve code
readability.
[1] see commit 08c9026166
[2] see commit 8e15d5eb3a
The following message:
success resolving '<name>' (in '<domain>'?) after reducing the advertised EDNS UDP packet size to 512 octets
can currently be logged even if the EDNS UDP buffer size advertised in
queries sent to a given server had already been set to 512 octets before
the fetch context was created (e.g. due to the server responding
intermittently). In other words, this log message may be misleading as
lowering the advertised EDNS UDP buffer size may not be the actual cause
of <name> being successfully resolved. Remove the log message in
question to prevent confusion.
As this log message is the only existing user of the "reason" field in
struct fetchctx, remove that field as well, along with all the code
related to it.
This adds a unit test driver for BIND with Automake. It runs the unit
test program provided as its sole command line argument and then looks
for a core dump generated by that test program. If one is found, the
driver prints the backtrace into the test log.
If there are more that 5 NS record for a zone only perform a
maximum of 4 address lookups for all the name servers. This
limits the amount of remote lookup performed for server
addresses at each level for a given query.
Per Current Mechanisms 2.3.5, the curve name is DER-encoded in the
EC_PARAMS attribute, and the public key value is DER-encoded in the
EC_POINT attribute.
Add recursive "test" and "unit" rules, which execute "make check"
in specific directories - "make test" runs the system tests, and
"make unit" runs the unit tests.
The 'ephemeral' database implementation was used to provide a
lightweight database implemenation that doesn't cache results, and the
only place where it was really use is "samples" because delv is
overriding this to use "rbtdb" instead. Otherwise it was completely
unused.
* The 'ephemeral' cache DB (ecdb) implementation. An ecdb just provides
* temporary storage for ongoing name resolution with the common DB interfaces.
* It actually doesn't cache anything. The implementation expects any stored
* data is released within a short period, and does not care about the
* scalability in terms of the number of nodes.
The three libdns tests directly include ../dst_internal.h which
in turn directly include openssl headers, thus there was a missing
path and build failure on systems where OpenSSL is not in the default
include path.
this addresses a race that could occur during shutdown or when
reconfiguring to remove RPZ zones.
this change should ensure that the rpzs structure and the incremental
updates don't interfere with each other: rpzs->zones entries cannot
be set to NULL while an update quantum is running, and the
task should be destroyed and its queue purged so that no subsequent
quanta will run.
The rewrite of BIND 9 build system is a large work and cannot be reasonable
split into separate merge requests. Addition of the automake has a positive
effect on the readability and maintainability of the build system as it is more
declarative, it allows conditional and we are able to drop all of the custom
make code that BIND 9 developed over the years to overcome the deficiencies of
autoconf + custom Makefile.in files.
This squashed commit contains following changes:
- conversion (or rather fresh rewrite) of all Makefile.in files to Makefile.am
by using automake
- the libtool is now properly integrated with automake (the way we used it
was rather hackish as the only official way how to use libtool is via
automake
- the dynamic module loading was rewritten from a custom patchwork to libtool's
libltdl (which includes the patchwork to support module loading on different
systems internally)
- conversion of the unit test executor from kyua to automake parallel driver
- conversion of the system test executor from custom make/shell to automake
parallel driver
- The GSSAPI has been refactored, the custom SPNEGO on the basis that
all major KRB5/GSSAPI (mit-krb5, heimdal and Windows) implementations
support SPNEGO mechanism.
- The various defunct tests from bin/tests have been removed:
bin/tests/optional and bin/tests/pkcs11
- The text files generated from the MD files have been removed, the
MarkDown has been designed to be readable by both humans and computers
- The xsl header is now generated by a simple sed command instead of
perl helper
- The <irs/platform.h> header has been removed
- cleanups of configure.ac script to make it more simpler, addition of multiple
macros (there's still work to be done though)
- the tarball can now be prepared with `make dist`
- the system tests are partially able to run in oot build
Here's a list of unfinished work that needs to be completed in subsequent merge
requests:
- `make distcheck` doesn't yet work (because of system tests oot run is not yet
finished)
- documentation is not yet built, there's a different merge request with docbook
to sphinx-build rst conversion that needs to be rebased and adapted on top of
the automake
- msvc build is non functional yet and we need to decide whether we will just
cross-compile bind9 using mingw-w64 or fix the msvc build
- contributed dlz modules are not included neither in the autoconf nor automake
