Previously, the code would do:
REQUIRE(alg == CURVE1 || alg == CURVE2);
[...]
if (alg == CURVE1) { /* code for CURVE1 */ }
else { /* code for CURVE2 */ }
This approach is less extensible and also more prone to errors in case
the initial REQUIRE() is forgotten. The code has been refactored to
use:
REQUIRE(alg == CURVE1 || alg == CURVE2);
[...]
switch (alg) {
case CURVE1: /* code for CURVE1 */; break;
case CURVE2: /* code for CURVE2 */; break;
default: INSIST(0);
}
The pk11/constants.h header contained static CK_BYTE arrays and
we had to use #defines to pull only those we need. This commit
changes the constants to only define byte arrays with the content
and either use them directly or define the CK_BYTE arrays locally
where used.
Coverity showed that the return value of `dst_key_gettime` was
unchecked in INITIALIZE_STATE. If DST_TIME_CREATED was not set we
would set the state to be initialized to a weird last changed time.
This would normally not happen because DST_TIME_CREATED is always
set. However, we would rather set the time to now (as the comment
also indicates) not match the creation time.
The comment on INITIALIZE_STATE also needs updating as we no
longer always initialize to HIDDEN.
When dnssec-policy was introduced, it implicitly set inline-signing.
But DNSSEC maintenance required either inline-signing to be enabled,
or a dynamic zone. In other words, not in all cases you want to
DNSSEC maintain your zone with inline-signing.
Change the behavior and determine whether inline-signing is
required: if the zone is dynamic, don't use inline-signing,
otherwise implicitly set it.
You can also explicitly set inline-signing to yes with dnssec-policy,
the restriction that both inline-signing and dnssec-policy cannot
be set at the same time is now lifted.
However, 'inline-signing no;' on a non-dynamic zone with a
dnssec-policy is not possible.
All our MSVS Project files share the same intermediate directory. We
know that this doesn't cause any problems, so we can just disable the
detection in the project files.
Example of the warning:
warning MSB8028: The intermediate directory (.\Release\) contains files shared from another project (dnssectool.vcxproj). This can lead to incorrect clean and rebuild behavior.
Due to a way the stdatomic.h shim is implemented on Windows, the MSVC
always things that the outside type is the largest - atomic_(u)int_fast64_t.
This can lead to false positives as this one:
lib\dns\adb.c(3678): warning C4477: 'fprintf' : format string '%u' requires an argument of type 'unsigned int', but variadic argument 2 has type 'unsigned __int64'
We workaround the issue by loading the value in a scoped local variable
with correct type first.
Our vcxproj files set the WarningLevel to Level3, which is too verbose
for a code that needs to be portable. That basically leads to ignoring
all the errors that MSVC produces. This commits downgrades the
WarningLevel to Level1 and enables treating warnings as errors for
Release builds. For the Debug builds the WarningLevel got upgraded to
Level4, and treating warnings as errors is explicitly disabled.
We should eventually make the code clean of all MSVC warnings, but it's
a long way to go for Level4, so it's more reasonable to start at Level1.
For reference[1], these are the warning levels as described by MSVC
documentation:
* /W0 suppresses all warnings. It's equivalent to /w.
* /W1 displays level 1 (severe) warnings. /W1 is the default setting
in the command-line compiler.
* /W2 displays level 1 and level 2 (significant) warnings.
* /W3 displays level 1, level 2, and level 3 (production quality)
warnings. /W3 is the default setting in the IDE.
* /W4 displays level 1, level 2, and level 3 warnings, and all level 4
(informational) warnings that aren't off by default. We recommend
that you use this option to provide lint-like warnings. For a new
project, it may be best to use /W4 in all compilations. This option
helps ensure the fewest possible hard-to-find code defects.
* /Wall displays all warnings displayed by /W4 and all other warnings
that /W4 doesn't include — for example, warnings that are off by
default.
* /WX treats all compiler warnings as errors. For a new project, it
may be best to use /WX in all compilations; resolving all warnings
ensures the fewest possible hard-to-find code defects.
1. https://docs.microsoft.com/en-us/cpp/build/reference/compiler-option-warning-level?view=vs-2019
BIND wasn't honoring option "deny-answer-aliases" when configured to
forward queries.
Before the fix it was possible for nameservers listed in "forwarders"
option to return CNAME answers pointing to unrelated domains of the
original query, which could be used as a vector for rebinding attacks.
The fix ensures that BIND apply filters even if configured as a forwarder
instance.
(cherry picked from commit af6a4de3d5ad6c1967173facf366e6c86b3ffc28)
Rather than group key ids together, group key id with its
corresponding counters. This should make growing / shrinking easier
than having keyids then counters.
The first attempt to add DNSSEC sign statistics was naive: for each
zone we allocated 64K counters, twice. In reality each zone has at
most four keys, so the new approach only has room for four keys per
zone. If after a rollover more keys have signed the zone, existing
keys are rotated out.
The DNSSEC sign statistics has three counters per key, so twelve
counters per zone. First counter is actually a key id, so it is
clear what key contributed to the metrics. The second counter
tracks the number of generated signatures, and the third tracks
how many of those are refreshes.
This means that in the zone structure we no longer need two separate
references to DNSSEC sign metrics: both the resign and refresh stats
are kept in a single dns_stats structure.
Incrementing dnssecsignstats:
Whenever a dnssecsignstat is incremented, we look up the key id
to see if we already are counting metrics for this key. If so,
we update the corresponding operation counter (resign or
refresh).
If the key is new, store the value in a new counter and increment
corresponding counter.
If all slots are full, we rotate the keys and overwrite the last
slot with the new key.
Dumping dnssecsignstats:
Dumping dnssecsignstats is no longer a simple wrapper around
isc_stats_dump, but uses the same principle. The difference is that
rather than dumping the index (key tag) and counter, we have to look
up the corresponding counter.
If we initialize goals on all keys, superfluous keys that match
the policy all desire to be active. For example, there are six
keys available for a policy that needs just two, we only want to
set the goal state to OMNIPRESENT on two keys, not six.
Migrating from 'auto-dnssec maintain;' to dnssec-policy did not
work properly, mainly because the legacy keys were initialized
badly. Earlier commit deals with migration where existing keys
match the policy. This commit deals with migration where existing
keys do not match the policy. In that case, named must not
immediately delete the existing keys, but gracefully roll to the
dnssec-policy.
However, named did remove the existing keys immediately. This is
because the legacy key states were initialized badly. Because
those keys had their states initialized to HIDDEN or RUMOURED, the
keymgr decides that they can be removed (because only when the key
has its states in OMNIPRESENT it can be used safely).
The original thought to initialize key states to HIDDEN (and
RUMOURED to deal with existing keys) was to ensure that those keys
will go through the required propagation time before the keymgr
decides they can be used safely. However, those keys are already
in the zone for a long time and making the key states represent
otherwise is dangerous: keys may be pulled out of the zone while
in fact they are required to establish the chain of trust.
Fix initializing key states for existing keys by looking more closely
at the time metadata. Add TTL and propagation delays to the time
metadata and see if the DNSSEC records have been propagated.
Initialize the state to OMNIPRESENT if so, otherwise initialize to
RUMOURED. If the time metadata is in the future, or does not exist,
keep initializing the state to HIDDEN.
The added test makes sure that new keys matching the policy are
introduced, but existing keys are kept in the zone until the new
keys have been propagated.
Migrating from 'auto-dnssec maintain;' to dnssec-policy did not
work properly, mainly because the legacy keys were initialized
badly. Several adjustments in the keymgr are required to get it right:
- Set published time on keys when we calculate prepublication time.
This is not strictly necessary, but it is weird to have an active
key without the published time set.
- Initalize key states also before matching keys. Determine the
target state by looking at existing time metadata: If the time
data is set and is in the past, it is a hint that the key and
its corresponding records have been published in the zone already,
and the state is initialized to RUMOURED. Otherwise, initialize it
as HIDDEN. This fixes migration to dnssec-policy from existing
keys.
- Initialize key goal on keys that match key policy to OMNIPRESENT.
These may be existing legacy keys that are being migrated.
- A key that has its goal to OMNIPRESENT *or* an active key can
match a kasp key. The code was changed with CHANGE 5354 that
was a bugfix to prevent creating new KSK keys for zones in the
initial stage of signing. However, this caused problems for
restarts when rollovers are in progress, because an outroducing
key can still be an active key.
The test for this introduces a new KEY property 'legacy'. This is
used to skip tests related to .state files.
After an RPZ zone is updated via zone transfer, the RPZ summary
database is updated, inserting the newly added names in the policy
zone and deleting the newly removed ones. The first part of this
was quantized so it would not run too long and starve other tasks
during large updates, but the second part was not quantized, so
that an update in which a large number of records were deleted
could cause named to become briefly unresponsive.
The 3 warnings reported are:
os.c:872:7: warning: Although the value stored to 'ptr' is used in the enclosing expression, the value is never actually read from 'ptr'
if ((ptr = strtok_r(command, " \t", &last)) == NULL) {
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
--
rpz.c:1117:10: warning: Although the value stored to 'zbits' is used in the enclosing expression, the value is never actually read from 'zbits'
return (zbits &= x);
^ ~
1 warning generated.
--
openssleddsa_link.c:532:10: warning: Although the value stored to 'err' is used in the enclosing expression, the value is never actually read from 'err'
while ((err = ERR_get_error()) != 0) {
^ ~~~~~~~~~~~~~~~
1 warning generated.
The isc_mem API now crashes on memory allocation failure, and this is
the next commit in series to cleanup the code that could fail before,
but cannot fail now, e.g. isc_result_t return type has been changed to
void for the isc_log API functions that could only return ISC_R_SUCCESS.
On Windows, C11 localtime_r() and gmtime_r() functions are not
available. While localtime() and gmtime() functions are already thread
safe because they use Thread Local Storage, it's quite ugly to #ifdef
around every localtime_r() and gmtime_r() usage to make the usage also
thread-safe on POSIX platforms.
The commit adds wrappers around Windows localtime_s() and gmtime_s()
functions.
NOTE: The implementation of localtime_s and gmtime_s in Microsoft CRT
are incompatible with the C standard since it has reversed parameter
order and errno_t return type.
The <isc/md.h> header directly included <openssl/evp.h> header which
enforced all users of the libisc library to explicitly list the include
path to OpenSSL and link with -lcrypto. By hiding the specific
implementation into the private namespace, we no longer enforce this.
In the long run, this might also allow us to switch cryptographic
library implementation without affecting the downstream users.
While making the isc_md_type_t type opaque, the API using the data type
was changed to use the pointer to isc_md_type_t instead of using the
type directly.
This new option was added to fill a gap in RPZ configuration
options.
It was possible to instruct BIND wheter NSIP rewritting rules would
apply or not, as long as the required data was already in cache or not,
respectively, by means of the option nsip-wait-recurse.
A value of yes (default) could incur a little processing cost, since
BIND would need to recurse to find NS addresses in case they were not in
the cache.
This behavior could be changed by setting nsip-wait-recurse value to no,
in which case BIND would promptly return some error code if the NS IP addresses
data were not in cache, then BIND would start a recursive query
in background, so future similar requests would have the required data
(NS IPs) in cache, allowing BIND to apply NSIP rules accordingly.
A similar feature wasn't available for NSDNAME triggers, so this commit
adds the option nsdname-wait-recurse to fill this gap, as it was
expected by couple BIND users.
Save 'i' to 'locknum' and use that rather than using
'header->node->locknum' when performing the deferred
unlock as 'header->node->locknum' can theoretically be
different to 'i'.
When configuring the same dnssec-policy for two zones with the same
name but in different views, there is a race condition for who will
run the keymgr first. If running sequential only one set of keys will
be created, if running parallel two set of keys will be created.
Lock the kasp when running looking for keys and running the key
manager. This way, for the same zone in different views only one
keyset will be created.
The dnssec-policy does not implement sharing keys between different
zones.
Algorithm rollover waited too long before introducing zone
signatures. It waited to make sure all signatures were resigned,
but when introducing a new algorithm, all signatures are resigned
immediately. Only add the sign delay if there is a predecessor key.
Algorithm rollover was stuck on submitting DS because keymgr thought
it would move to an invalid state. It did not match the current
key because it checked it against the current key in the next state.
Fixed by when checking the current key, check it against the desired
state, not the existing state.
Add a test case for algorithm rollover. This is triggered by
changing the dnssec-policy. A new nameserver ns6 is introduced
for tests related to dnssec-policy changes.
This requires a slight change in check_next_key_event to only
check the last occurrence. Also, change the debug log message in
lib/dns/zone.c to deal with checks when no next scheduled key event
exists (and default to loadkeys interval 3600).
- change name of 'bytes' to 'xfrsize' in dns_db_getsize() parameter list
and related variables; this is a more accurate representation of what
the function is doing
- change the size calculations in dns_db_getsize() to more accurately
represent the space needed for a *XFR message or journal file to contain
the data in the database. previously we returned the sizes of all
rdataslabs, including header overhead and offset tables, which
resulted in the database size being reported as much larger than the
equivalent *XFR or journal.
- map files caused a particular problem here: the fullname can't be
determined from the node while a file is being deserialized, because
the uppernode pointers aren't set yet. so we store "full name length"
in the dns_rbtnode structure while serializing, and clear it after
deserialization is complete.
the call initailizing a journal iterator can now optionally return
to the caller the size in bytes of an IXFR message (not including
DNS header overhead, signatures etc) containing the differences from
the beginning to the ending serial number.
this is calculated by scanning the journal transaction headers to
calculate the transfer size. since journal file records contain a length
field that is not included in IXFR messages, we subtract out the length
of those fields from the overall transaction length.
this necessitated adding an "RR count" field to the journal transaction
header, so we know how many length fields to subract. NOTE: this will
make existing journal files stop working!
