Parse the configuration of tls objects into SSL_CTX* objects. Listen on
DoT if 'tls' option is setup in listen-on directive. Use DoT/DoH ports
for DoT/DoH.
there were two failures during observed in testing, both occurring
when 'rndc halt' was run rather than 'rndc stop' - the latter dumps
zone contents to disk and presumably introduced enough delay to
prevent the races:
- a failure when the zone was shut down and called dns_xfrin_detach()
before the xfrin had finished connecting; the connect timeout
terminated without detaching its handle
- a failure when the tcpdns socket timer fired after the outerhandle
had already been cleared.
this commit incidentally addresses a failure observed in mutexatomic
due to a variable having been initialized incorrectly.
This command is similar in arguments as -checkds so refactor the
'named_server_dnssec' function accordingly. The only difference
are that:
- It does not take a "publish" or "withdrawn" argument.
- It requires the key id to be set (add a check to make sure).
Add tests that will trigger rollover immediately and one that
schedules a test in the future.
The dotat() function has been changed to send the TAT
query asynchronously, so there's no lock order loop
because we initialize the data first and then we schedule
the TAT send to happen asynchronously.
This breaks following lock-order loops:
zone->lock (dns_zone_setviewcommit) while holding view->lock
(dns_view_setviewcommit)
keytable->lock (dns_keytable_find) while holding zone->lock
(zone_asyncload)
view->lock (dns_view_findzonecut) while holding keytable->lock
(dns_keytable_forall)
No issues with the glue cache feature have been reported since its
introduction in BIND 9.12. As the rationale for introducing the
"glue-cache" option was to have a safety switch readily available in
case the glue cache turns out to cause problems, it is time to deprecate
the option. Glue cache will be permanently enabled in a future release,
at which point the "glue-cache" option will be made obsolete.
Attaching and detaching handle pointers will make it easier to
determine where and why reference counting errors have occurred.
A handle needs to be referenced more than once when multiple
asynchronous operations are in flight, so callers must now maintain
multiple handle pointers for each pending operation. For example,
ns_client objects now contain:
- reqhandle: held while waiting for a request callback (query,
notify, update)
- sendhandle: held while waiting for a send callback
- fetchhandle: held while waiting for a recursive fetch to
complete
- updatehandle: held while waiting for an update-forwarding
task to complete
control channel connection objects now contain:
- readhandle: held while waiting for a read callback
- sendhandle: held while waiting for a send callback
- cmdhandle: held while an rndc command is running
httpd connections contain:
- readhandle: held while waiting for a read callback
- sendhandle: held while waiting for a send callback
An implicit default of "max-cache-size 90%;" may cause memory use issues
on hosts which run numerous named instances in parallel (e.g. GitLab CI
runners) due to the cache RBT hash table now being pre-allocated [1] at
startup. Add a new command line option, "-T maxcachesize=...", to allow
the default value of "max-cache-size" to be overridden at runtime. When
this new option is in effect, it overrides any other "max-cache-size"
setting in the configuration, either implicit or explicit. This
approach was chosen because it is arguably the simplest one to
implement.
The following alternative approaches to solving this problem were
considered and ultimately rejected (after it was decided they were not
worth the extra code complexity):
- adding the same command line option, but making explicit
configuration statements have priority over it,
- adding a build-time option that allows the implicit default of
"max-cache-size 90%;" to be overridden.
[1] see commit e24bc324b455d9cad7b51acd3d5c7b4e40c66187
Add a new 'rndc' command 'dnssec -checkds' that allows the user to
signal named that a new DS record has been seen published in the
parent, or that an existing DS record has been withdrawn from the
parent.
Upon the 'checkds' request, 'named' will write out the new state for
the key, updating the 'DSPublish' or 'DSRemoved' timing metadata.
This replaces the "parent-registration-delay" configuration option,
this was unreliable because it was purely time based (if the user
did not actually submit the new DS to the parent for example, this
could result in an invalid DNSSEC state).
Because we cannot rely on the parent registration delay for state
transition, we need to replace it with a different guard. Instead,
if a key wants its DS state to be moved to RUMOURED, the "DSPublish"
time must be set and must not be in the future. If a key wants its
DS state to be moved to UNRETENTIVE, the "DSRemoved" time must be set
and must not be in the future.
By default, with '-checkds' you set the time that the DS has been
published or withdrawn to now, but you can set a different time with
'-when'. If there is only one KSK for the zone, that key has its
DS state moved to RUMOURED. If there are multiple keys for the zone,
specify the right key with '-key'.
The current serve-stale implementation in BIND 9 stores all received
records in the cache for a max-stale-ttl interval (default 12 hours).
This allows DNS operators to turn the serve-stale answers in an event of
large authoritative DNS outage. The caching of the stale answers needs
to be enabled before the outage happens or the feature would be
otherwise useless.
The negative consequence of the default setting is the inevitable
cache-bloat that happens for every and each DNS operator running named.
In this MR, a new configuration option `stale-cache-enable` is
introduced that allows the operators to selectively enable or disable
the serve-stale feature of BIND 9 based on their decision.
The newly introduced option has been disabled by default,
e.g. serve-stale is disabled in the default configuration and has to be
enabled if required.
Created isc_refcount_decrement_expect macro to test conditionally
the return value to ensure it is in expected range. Converted
unchecked isc_refcount_decrement to use isc_refcount_decrement_expect.
Converted INSIST(isc_refcount_decrement()...) to isc_refcount_decrement_expect.
- using an isc_task to execute all rndc functions makes it relatively
simple for them to acquire task exclusive mode when needed
- control_recvmessage() has been separated into two functions,
control_recvmessage() and control_respond(). the respond function
can be called immediately from control_recvmessage() when processing
a nonce, or it can be called after returning from the task event
that ran the rndc command function.
When "rndc reconfig" is run, named first configures a fresh set of views
and then tears down the old views. Consider what happens for a single
view with LMDB enabled; "envA" is the pointer to the LMDB environment
used by the original/old version of the view, "envB" is the pointer to
the same LMDB environment used by the new version of that view:
1. mdb_env_open(envA) is called when the view is first created.
2. "rndc reconfig" is called.
3. mdb_env_open(envB) is called for the new instance of the view.
4. mdb_env_close(envA) is called for the old instance of the view.
This seems to have worked so far. However, an upstream change [1] in
LMDB which will be part of its 0.9.26 release prevents the above
sequence of calls from working as intended because the locktable mutexes
will now get destroyed by the mdb_env_close() call in step 4 above,
causing any subsequent mdb_txn_begin() calls to fail (because all of the
above steps are happening within a single named process).
Preventing the above scenario from happening would require either
redesigning the way we use LMDB in BIND, which is not something we can
easily backport, or redesigning the way BIND carries out its
reconfiguration process, which would be an even more severe change.
To work around the problem, set MDB_NOLOCK when calling mdb_env_open()
to stop LMDB from controlling concurrent access to the database and do
the necessary locking in named instead. Reuse the view->new_zone_lock
mutex for this purpose to prevent the need for modifying struct dns_view
(which would necessitate library API version bumps). Drop use of
MDB_NOTLS as it is made redundant by MDB_NOLOCK: MDB_NOTLS only affects
where LMDB reader locktable slots are stored while MDB_NOLOCK prevents
the reader locktable from being used altogether.
[1] 2fd44e3251
BUFSIZ (512 bytes on Windows) may not be enough to fit the status of a
DNSSEC policy and three DNSSEC keys.
Set the size of the relevant buffer to a hardcoded value of 4096 bytes,
which should be enough for most scenarios.
Implement the 'rndc dnssec -status' command that will output
some information about the key states, such as which policy is
used for the zone, what keys are in use, and when rollover is
scheduled.
Add loose testing in the kasp system test, the actual times are
already tested via key file inspection.
Add the code and documentation required to provide DNSSEC signing
status through rndc. This does not yet show any useful information,
just provide the command that will output some dummy string.
- clone keynode->dsset rather than return a pointer so that thread
use is independent of each other.
- hold a reference to the dsset (keynode) so it can't be deleted
while in use.
- create a new keynode when removing DS records so that dangling
pointers to the deleted records will not occur.
- use a rwlock when accessing the rdatalist to prevent instabilities
when DS records are added.
The introduction of netmgr doubled the number of threads from which
dnstap data may be logged: previously, it could only happen from within
taskmgr worker threads; with netmgr, it can happen both from taskmgr
worker threads and from network threads. Since the argument passed to
fstrm_iothr_options_set_num_input_queues() was not updated to reflect
this change, some calls to fstrm_iothr_get_input_queue() can now return
NULL, effectively preventing some dnstap data from being logged.
Whether this bug is triggered or not depends on thread scheduling order
and packet distribution between network threads, but will almost
certainly be triggered on any recursive resolver sooner or later. Fix
by requesting the correct number of dnstap input queues to be allocated.
named_os_openfile was being called with switch_user set to true
unconditionally leading to log messages about being unable to
switch user identity from named when regenerating the key.
The rewrite of BIND 9 build system is a large work and cannot be reasonable
split into separate merge requests. Addition of the automake has a positive
effect on the readability and maintainability of the build system as it is more
declarative, it allows conditional and we are able to drop all of the custom
make code that BIND 9 developed over the years to overcome the deficiencies of
autoconf + custom Makefile.in files.
This squashed commit contains following changes:
- conversion (or rather fresh rewrite) of all Makefile.in files to Makefile.am
by using automake
- the libtool is now properly integrated with automake (the way we used it
was rather hackish as the only official way how to use libtool is via
automake
- the dynamic module loading was rewritten from a custom patchwork to libtool's
libltdl (which includes the patchwork to support module loading on different
systems internally)
- conversion of the unit test executor from kyua to automake parallel driver
- conversion of the system test executor from custom make/shell to automake
parallel driver
- The GSSAPI has been refactored, the custom SPNEGO on the basis that
all major KRB5/GSSAPI (mit-krb5, heimdal and Windows) implementations
support SPNEGO mechanism.
- The various defunct tests from bin/tests have been removed:
bin/tests/optional and bin/tests/pkcs11
- The text files generated from the MD files have been removed, the
MarkDown has been designed to be readable by both humans and computers
- The xsl header is now generated by a simple sed command instead of
perl helper
- The <irs/platform.h> header has been removed
- cleanups of configure.ac script to make it more simpler, addition of multiple
macros (there's still work to be done though)
- the tarball can now be prepared with `make dist`
- the system tests are partially able to run in oot build
Here's a list of unfinished work that needs to be completed in subsequent merge
requests:
- `make distcheck` doesn't yet work (because of system tests oot run is not yet
finished)
- documentation is not yet built, there's a different merge request with docbook
to sphinx-build rst conversion that needs to be rebased and adapted on top of
the automake
- msvc build is non functional yet and we need to decide whether we will just
cross-compile bind9 using mingw-w64 or fix the msvc build
- contributed dlz modules are not included neither in the autoconf nor automake
When dnssec-policy was introduced, it implicitly set inline-signing.
But DNSSEC maintenance required either inline-signing to be enabled,
or a dynamic zone. In other words, not in all cases you want to
DNSSEC maintain your zone with inline-signing.
Change the behavior and determine whether inline-signing is
required: if the zone is dynamic, don't use inline-signing,
otherwise implicitly set it.
You can also explicitly set inline-signing to yes with dnssec-policy,
the restriction that both inline-signing and dnssec-policy cannot
be set at the same time is now lifted.
However, 'inline-signing no;' on a non-dynamic zone with a
dnssec-policy is not possible.
The isc_mem API now crashes on memory allocation failure, and this is
the next commit in series to cleanup the code that could fail before,
but cannot fail now, e.g. isc_result_t return type has been changed to
void for the isc_log API functions that could only return ISC_R_SUCCESS.
This new option was added to fill a gap in RPZ configuration
options.
It was possible to instruct BIND wheter NSIP rewritting rules would
apply or not, as long as the required data was already in cache or not,
respectively, by means of the option nsip-wait-recurse.
A value of yes (default) could incur a little processing cost, since
BIND would need to recurse to find NS addresses in case they were not in
the cache.
This behavior could be changed by setting nsip-wait-recurse value to no,
in which case BIND would promptly return some error code if the NS IP addresses
data were not in cache, then BIND would start a recursive query
in background, so future similar requests would have the required data
(NS IPs) in cache, allowing BIND to apply NSIP rules accordingly.
A similar feature wasn't available for NSDNAME triggers, so this commit
adds the option nsdname-wait-recurse to fill this gap, as it was
expected by couple BIND users.
this corrects some style glitches such as:
```
long_function_call(arg, arg2, arg3, arg4, arg5, "str"
"ing");
```
...by adjusting the penalties for breaking strings and call
parameter lists.
Both clang-tidy and uncrustify chokes on statement like this:
for (...)
if (...)
break;
This commit uses a very simple semantic patch (below) to add braces around such
statements.
Semantic patch used:
@@
statement S;
expression E;
@@
while (...)
- if (E) S
+ { if (E) { S } }
@@
statement S;
expression E;
@@
for (...;...;...)
- if (E) S
+ { if (E) { S } }
@@
statement S;
expression E;
@@
if (...)
- if (E) S
+ { if (E) { S } }
