It's unclear if we are going to keep it or not, so let's mark it as
deprecated for a good measure. It's easier to un-deprecate it than the
other way around.
A number of DNS implementation produce NSEC records with bad type
maps that don't contain types that exist at the name leading to
NODATA responses being synthesize instead of the records in the
zone. NSEC records with these bad type maps often have the NSEC
NSEC field set to '\000.QNAME'. We look for the first label of
this pattern.
e.g.
example.com NSEC \000.example.com SOA NS NSEC RRSIG
example.com RRRSIG NSEC ...
example.com SOA ...
example.com RRRSIG SOA ...
example.com NS ...
example.com RRRSIG NS ...
example.com A ...
example.com RRRSIG A ...
A is missing from the type map.
This introduces a temporary option 'reject-000-label' to control
this behaviour.
'server <prefix> { broken-nsec yes; };' can now be used to stop
NSEC records from negative responses from servers in the given
prefix being cached and hence available to synth-from-dnssec.
This commit extends ACL syntax handling code with 'port' and
'transport' options. Currently, the extended syntax is available only
for allow-transfer options.
This commit disables the unused 'tls' clause options. For these some
backing code exists, but their values are not really used anywhere,
nor there are sufficient syntax tests for them.
These options are only disabled temporarily, until TLS certificate
verification gets implemented.
The new rules compare the target name in PTR and SRV records against
the machine name embedded in the kerberos principal. This can be
used to further restrict what PTR and SRV records can be added or
deleted via dynamic updates if desired.
Replace some "master/slave" terminology in the code with the preferred
"primary/secondary" keywords. This also changes user output such as
log messages, and fixes a typo ("seconary") in cfg_test.c.
There are still some references to "master" and "slave" for various
reasons:
- The old syntax can still be used as a synonym.
- The master syntax is kept when it refers to master files and formats.
- This commit replaces mainly keywords that are local. If "master" or
"slave" is used in for example a structure that is all over the
place, it is considered out of scope for the moment.
The documentation and feature-test were using '--with-idn' but the
configure script doesn't recognize this option. The correct option to
enable IDN support is '--with-libidn2'.
This commit adds the ability to enable or disable stateless TLS
session resumption tickets (see RFC5077). Having this ability is
twofold.
Firstly, these tickets are encrypted by the server, and the algorithm
might be weaker than the algorithm negotiated during the TLS session
establishment (it is in general the case for TLSv1.2, but the generic
principle applies to TLSv1.3 as well, despite it having better ciphers
for session tickets). Thus, they might compromise Perfect Forward
Secrecy.
Secondly, disabling it might be necessary if the same TLS key/cert
pair is supposed to be used by multiple servers to achieve, e.g., load
balancing because the session ticket by default gets generated in
runtime, while to achieve successful session resumption ability, in
this case, would have required using a shared key.
The proper alternative to having the ability to disable stateless TLS
session resumption tickets is to implement a proper session tickets
key rollover mechanism so that key rotation might be performed
often (e.g. once an hour) to not compromise forward secrecy while
retaining the associated performance benefits. That is much more work,
though. On the other hand, having the ability to disable session
tickets allows having a deployable configuration right now in the
cases when either forward secrecy is wanted or sharing the TLS
key/cert pair between multiple servers is needed (or both).
This commit adds support for enforcing the preference of server
ciphers over the client ones. This way, the server attains control
over the ciphers priority and, thus, can choose more strong cyphers
when a client prioritises less strong ciphers over the more strong
ones, which is beneficial when trying to achieve Perfect Forward
Secrecy.
This commit adds support for setting TLS cipher list string in the
format specified in the OpenSSL
documentation (https://www.openssl.org/docs/man1.1.1/man1/ciphers.html).
The syntax of the cipher list is verified so that specifying the wrong
string will prevent the configuration from being loaded.
This commit adds support for loading DH-parameters (Diffie-Hellman
parameters) via the new "dhparam-file" option within "tls" clause. In
particular, Diffie-Hellman parameters are needed to enable the range
of forward-secrecy enabled cyphers for TLSv1.2, which are getting
silently disabled otherwise.
This commit adds the ability to specify allowed TLS protocols versions
within the "tls" clause. If an unsupported TLS protocol version is
specified in a file, the configuration file will not pass
verification.
Also, this commit adds strict checks for "tls" clauses verification,
in particular:
- it ensures that loading configuration files containing duplicated
"tls" clauses is not allowed;
- it ensures that loading configuration files containing "tls" clauses
missing "cert-file" or "key-file" is not allowed;
- it ensures that loading configuration files containing "tls" clauses
named as "ephemeral" or "none" is not allowed.
"cache-file" was already documented as intended for testing
purposes only and not to be used, so we can remove it without
waiting. this commit marks the option as "ancient", and
removes all the documentation and implementing code, including
dns_cache_setfilename() and dns_cache_dump().
it also removes the documentation for the '-x cachefile`
parameter to named, which had already been removed, but the man
page was not updated at the time.
This commit adds a new configuration option to set the receive and send
buffer sizes on the TCP and UDP netmgr sockets. The default is `0`
which doesn't set any value and just uses the value set by the operating
system.
There's no magic value here - set it too small and the performance will
drop, set it too large, the buffers can fill-up with queries that have
already timeouted on the client side and nobody is interested for the
answer and this would just make the server clog up even more by making
it produce useless work.
The `netstat -su` can be used on POSIX systems to monitor the receive
and send buffer errors.
Add a new option 'purge-keys' to 'dnssec-policy' that will purge key
files for deleted keys. The option determines how long key files
should be retained prior to removing the corresponding files from
disk.
If set to 0, the option is disabled and 'named' will not remove key
files from disk.
This commit adds stub parser support and tests for:
- an "http" global option for HTTP/2 endpoint configuration.
- command line options to set http or https port numbers by
specifying -p http=PORT or -p https=PORT. (NOTE: this change
only affects syntax; specifying HTTP and HTTPS ports on the
command line currently has no effect.)
- named.conf options "http-port" and "https-port"
- HTTPSPORT environment variable for use when running tests.
Add support for a "tls" key/value pair for zone primaries, referencing
either a "tls" configuration statement or "ephemeral". If set to use
TLS, zones will send SOA and AXFR/IXFR queries over a TLS channel.
The 'filter-aaaa', 'filter-aaaa-on-v4', and 'filter-aaaa-on-v6' options
are replaced by the filter-aaaa plugin. This plugin was introduced in
9.13.5 and so it is safe to remove the named.conf options.
Upon request from Mark, change the configuration of salt to salt
length.
Introduce a new function 'dns_zone_checknsec3aram' that can be used
upon reconfiguration to check if the existing NSEC3 parameters are
in sync with the configuration. If a salt is used that matches the
configured salt length, don't change the NSEC3 parameters.
Parse the configuration of tls objects into SSL_CTX* objects. Listen on
DoT if 'tls' option is setup in listen-on directive. Use DoT/DoH ports
for DoT/DoH.
This commit adds stub parser support and tests for:
- "tls" statement, specifying key and cert.
- an optional "tls" keyvalue in listen-on statements for DoT
configuration.
Documentation for these options has also been added to the ARM, but
needs further work.
No issues with the glue cache feature have been reported since its
introduction in BIND 9.12. As the rationale for introducing the
"glue-cache" option was to have a safety switch readily available in
case the glue cache turns out to cause problems, it is time to deprecate
the option. Glue cache will be permanently enabled in a future release,
at which point the "glue-cache" option will be made obsolete.
The current serve-stale implementation in BIND 9 stores all received
records in the cache for a max-stale-ttl interval (default 12 hours).
This allows DNS operators to turn the serve-stale answers in an event of
large authoritative DNS outage. The caching of the stale answers needs
to be enabled before the outage happens or the feature would be
otherwise useless.
The negative consequence of the default setting is the inevitable
cache-bloat that happens for every and each DNS operator running named.
In this MR, a new configuration option `stale-cache-enable` is
introduced that allows the operators to selectively enable or disable
the serve-stale feature of BIND 9 based on their decision.
The newly introduced option has been disabled by default,
e.g. serve-stale is disabled in the default configuration and has to be
enabled if required.
it is now an error to have two primaries lists with the same
name. this is true regardless of whether the "primaries" or
"masters" keywords were used to define them.
as "type primary" is preferred over "type master" now, it makes
sense to make "primaries" available as a synonym too.
added a correctness check to ensure "primaries" and "masters"
cannot both be used in the same zone.
