When processing UPDATE request DNSKEY, CDNSKEY and CDS record that
are managed by named are filtered out. The log message has been
updated to report the actual type rather that just DNSKEY.
rr_exists errored if the name did not exist in the zone. This was
not an issue prior to the addition of krb5-subdomain-self-rhs and
ms-subdomain-self-rhs as the only name used was the zone name which
always existed.
We removed DNSSEC management via dynamic update (see issue #3686),
this means we also should no longer add signing records (of private
type) for DNSKEY records added via dynamic update.
The following code block repeats quite often:
if (rdata.type == dns_rdatatype_dnskey ||
rdata.type == dns_rdatatype_cdnskey ||
rdata.type == dns_rdatatype_cds)
Introduce a new function to reduce the repetition.
The raw zone is not supposed to be signed. DNSKEY records in a raw zone
should not trigger zone signing. The update code needs to be able to
identify when it is working on a raw zone. Add dns_zone_israw() and
dns_zone_issecure() enable it to do this. Also, we need to check the
case for 'auto-dnssec maintain'.
When synchronizing the journal or database from the unsigned version of
the zone to the secure version of the zone, allow DNSKEY records to be
synced, because these may be added by the user with the sole intent to
publish the record (not used for signing). This may be the case for
example in the multisigner model 2 (RFC 8901).
Additional code needs to be added to ensure that we do not remove DNSKEY
records that are under our control. Keys under our control are keys that
are used for signing the zone and thus that we have key files for.
Same counts for CDNSKEY and CDS (records that are derived from keys).
In e18541287231b721c9cdb7e492697a2a80fd83fc, the TCP accept quota code
became broken in a subtle way - the quota would get initialized on the
first accept for the server socket and then deleted from the server
socket, so it would never get applied again.
Properly fixing this required a bigger refactoring of the isc_quota API
code to make it much simpler. The new code decouples the ownership of
the quota and acquiring/releasing the quota limit.
After (during) the refactoring it became more clear that we need to use
the callback from the child side of the accepted connection, and not the
server side.
This change makes the zone table lock-free for reads. Previously, the
zone table used a red-black tree, which is not thread safe, so the hot
read path acquired both the per-view mutex and the per-zonetable
rwlock. (The double locking was to fix to cleanup races on shutdown.)
One visible difference is that zones are not necessarily shut down
promptly: it depends on when the qp-trie garbage collector cleans up
the zone table. The `catz` system test checks several times that zones
have been deleted; the test now checks for zones to be removed from
the server configuration, instead of being fully shut down. The catz
test does not churn through enough zones to trigger a gc, so the zones
are not fully detached until the server exits.
After this change, it is still possible to improve the way we handle
changes to the zone table, for instance, batching changes, or better
compaction heuristics.
Instead of using an extra rarely-used paramater to dns_clientinfo_init()
to set ECS information for a client, this commit adds a function
dns_clientinfo_setecs() which can be called only when ECS is needed.
check allow-update, update-policy, and allow-update-forwarding before
consuming quota slots, so that unauthorized clients can't fill the
quota.
(this moves the access check before the prerequisite check, which
violates the precise wording of RFC 2136. however, RFC co-author Paul
Vixie has stated that the RFC is mistaken on this point; it should have
said that access checking must happen *no later than* the completion of
prerequisite checks, not that it must happen exactly then.)
limit the number of simultaneous DNS UPDATE events that can be
processed by adding a quota for update and update forwarding.
this quota currently, arbitrarily, defaults to 100.
also add a statistics counter to record when the update quota
has been exceeded.
the 'nupdates' field was originally used to track whether a client
was ready to shut down, along with other similar counters nreads,
nrecvs, naccepts and nsends. this is now tracked differently, but
nupdates was overlooked when the other counters were removed.
Remove code that triggers key and denial of existence management
operations. Dynamic update should no longer be used to do DNSSEC
maintenance (other than that of course signatures need to be
created for the new zone contents).
Mostly generated automatically with the following semantic patch,
except where coccinelle was confused by #ifdef in lib/isc/net.c
@@ expression list args; @@
- UNEXPECTED_ERROR(__FILE__, __LINE__, args)
+ UNEXPECTED_ERROR(args)
@@ expression list args; @@
- FATAL_ERROR(__FILE__, __LINE__, args)
+ FATAL_ERROR(args)
Add new semantic patch to replace the straightfoward uses of:
ptr = isc_mem_{get,allocate}(..., size);
memset(ptr, 0, size);
with the new API call:
ptr = isc_mem_{get,allocate}x(..., size, ISC_MEM_ZERO);
When doing a dnssec-policy reconfiguration from a zone with NSEC only
keys to a zone that uses NSEC3, figure out to wait with building the
NSEC3 chain.
Previously, BIND 9 would attempt to sign such a zone, but failed to
do so because the NSEC3 chain conflicted with existing DNSKEY records
in the zone that were not compatible with NSEC3.
There exists logic for detecting such a case in the functions
dnskey_sane() (in lib/dns/zone.c) and check_dnssec() (in
lib/ns/update.c). Both functions look very similar so refactor them
to use the same code and call the new function (called
dns_zone_check_dnskey_nsec3()).
Also update the dns_nsec_nseconly() function to take an additional
parameter 'diff' that, if provided, will be checked whether an
offending NSEC only DNSKEY will be deleted from the zone. If so,
this key will not be considered when checking the zone for NSEC only
DNSKEYs. This is needed to allow a transition from an NSEC zone with
NSEC only DNSKEYs to an NSEC3 zone.
Previously, the zonemgr created 1 task per 100 zones and 1 memory
context per 1000 zones (with minimum 10 tasks and 2 memory contexts) to
reduce the contention between threads.
Instead of reducing the contention by having many resources, create a
per-nm_thread memory context, loadtask and zonetask and spread the zones
between just per-thread resources.
Note: this commit alone does decrease performance when loading the zone
by couple seconds (in case of 1M zone) and thus there's more work in
this whole MR fixing the performance.
Ensure the update zone name is mentioned in the NOTAUTH error message
in the server log, so that it is easier to track down problematic
update clients. There are two cases: either the update zone is
unrelated to any of the server's zones (previously no zone was
mentioned); or the update zone is a subdomain of one or more of the
server's zones (previously the name of the irrelevant parent zone was
misleadingly logged).
Closes#3209
The ns_client_t is always attached to ns_clientmgr_t which has
associated memory context, server context, task and threadid. Use those
directly from the ns_clientmgr_t instead of attaching it to an extra
copy in ns_client_t to make the ns_client_t more sleek and lean.
Additionally, remove some stray ns_client_t struct members that were not
used anywhere.
Historically, the inline keyword was a strong suggestion to the compiler
that it should inline the function marked inline. As compilers became
better at optimising, this functionality has receded, and using inline
as a suggestion to inline a function is obsolete. The compiler will
happily ignore it and inline something else entirely if it finds that's
a better optimisation.
Therefore, remove all the occurences of the inline keyword with static
functions inside single compilation unit and leave the decision whether
to inline a function or not entirely on the compiler
NOTE: We keep the usage the inline keyword when the purpose is to change
the linkage behaviour.
this brings DNS_CLIENTINFO_VERSION into line with the subscription
branch so that fixes applied to clientinfo processing can also be
applied to the main branch without diverging.
This commit converts the license handling to adhere to the REUSE
specification. It specifically:
1. Adds used licnses to LICENSES/ directory
2. Add "isc" template for adding the copyright boilerplate
3. Changes all source files to include copyright and SPDX license
header, this includes all the C sources, documentation, zone files,
configuration files. There are notes in the doc/dev/copyrights file
on how to add correct headers to the new files.
4. Handle the rest that can't be modified via .reuse/dep5 file. The
binary (or otherwise unmodifiable) files could have license places
next to them in <foo>.license file, but this would lead to cluttered
repository and most of the files handled in the .reuse/dep5 file are
system test files.
The new rules compare the target name in PTR and SRV records against
the machine name embedded in the kerberos principal. This can be
used to further restrict what PTR and SRV records can be added or
deleted via dynamic updates if desired.
Replace some "master/slave" terminology in the code with the preferred
"primary/secondary" keywords. This also changes user output such as
log messages, and fixes a typo ("seconary") in cfg_test.c.
There are still some references to "master" and "slave" for various
reasons:
- The old syntax can still be used as a synonym.
- The master syntax is kept when it refers to master files and formats.
- This commit replaces mainly keywords that are local. If "master" or
"slave" is used in for example a structure that is all over the
place, it is considered out of scope for the moment.
Remove the dynamic registration of result codes. Convert isc_result_t
from unsigned + #defines into 32-bit enum type in grand unified
<isc/result.h> header. Keep the existing values of the result codes
even at the expense of the description and identifier tables being
unnecessary large.
Additionally, add couple of:
switch (result) {
[...]
default:
break;
}
statements where compiler now complains about missing enum values in the
switch statement.
Previously, as a way of reducing the contention between threads a
clientmgr object would be created for each interface/IP address.
We tasks being more strictly bound to netmgr workers, this is no longer
needed and we can just create clientmgr object per worker queue (ncpus).
Each clientmgr object than would have a single task and single memory
context.
When using the `unixtime` or `date` method to update the SOA serial,
`named` and `dnssec-signzone` would silently fallback to `increment`
method to prevent the new serial number to be smaller than the old
serial number (using the serial number arithmetics). Add a warning
message when such fallback happens.
The message buffer passed to ns__client_request is only valid for
the life of the the ns__client_request call. Save a copy of it
when we recurse or process a update as ns__client_request will
return before those operations complete.
Attaching and detaching handle pointers will make it easier to
determine where and why reference counting errors have occurred.
A handle needs to be referenced more than once when multiple
asynchronous operations are in flight, so callers must now maintain
multiple handle pointers for each pending operation. For example,
ns_client objects now contain:
- reqhandle: held while waiting for a request callback (query,
notify, update)
- sendhandle: held while waiting for a send callback
- fetchhandle: held while waiting for a recursive fetch to
complete
- updatehandle: held while waiting for an update-forwarding
task to complete
control channel connection objects now contain:
- readhandle: held while waiting for a read callback
- sendhandle: held while waiting for a send callback
- cmdhandle: held while an rndc command is running
httpd connections contain:
- readhandle: held while waiting for a read callback
- sendhandle: held while waiting for a send callback
