Under specific rare timing circumstances the uv_read_start() could
fail with UV_EINVAL when the connection is reset between the connect (or
accept) and the uv_read_start() call on the nmworker loop. Handle such
situation gracefully by propagating the errors from uv_read_start() into
upper layers, so the socket can be internally closed().
As we are going to use libuv outside of the netmgr, we need the shims to
be readily available for the rest of the codebase.
Move the "netmgr/uv-compat.h" to <isc/uv.h> and netmgr/uv-compat.c to
uv.c, and as a rule of thumb, the users of libuv should include
<isc/uv.h> instead of <uv.h> directly.
Additionally, merge netmgr/uverr2result.c into uv.c and rename the
single function from isc__nm_uverr2result() to isc_uverr2result().
Move the netmgr socket related functions from netmgr/netmgr.c and
netmgr/uv-compat.c to netmgr/socket.c, so they are all present all in
the same place. Adjust the names of couple interal functions
accordingly.
This commit ensures that write callbacks are getting called only after
the data has been sent via the network.
Without this fix, a situation could appear when a write callback could
get called before the actual encrypted data would have been sent to
the network. Instead, it would get called right after it would have
been passed to the OpenSSL (i.e. encrypted).
Most likely, the issue does not reveal itself often because the
callback call was asynchronous, so in most cases it should have been
called after the data has been sent, but that was not guaranteed by
the code logic.
Also, this commit removes one memory allocation (netievent) from a hot
path, as there is no need to call this callback asynchronously
anymore.
When we compile with libuv that has some capabilities via flags passed
to f.e. uv_udp_listen() or uv_udp_bind(), the call with such flags would
fail with invalid arguments when older libuv version is linked at the
runtime that doesn't understand the flag that was available at the
compile time.
Enforce minimal libuv version when flags have been available at the
compile time, but are not available at the runtime. This check is less
strict than enforcing the runtime libuv version to be same or higher
than compile time libuv version.
This commit adds isc_nmsocket_set_tlsctx() - an asynchronous function
that replaces the TLS context within a given TLS-enabled listener
socket object. It is based on the newly added reference counting
functionality.
The intention of adding this function is to add functionality to
replace a TLS context without recreating the whole socket object,
including the underlying TCP listener socket, as a BIND process might
not have enough permissions to re-create it fully on reconfiguration.
Previously, HAVE_SO_REUSEPORT_LB has been defined only in the private
netmgr-int.h header file, making the configuration of load balanced
sockets inoperable.
Move the missing HAVE_SO_REUSEPORT_LB define the isc/netmgr.h and add
missing isc_nm_getloadbalancesockets() implementation.
Previously, the option to enable kernel load balancing of the sockets
was always enabled when supported by the operating system (SO_REUSEPORT
on Linux and SO_REUSEPORT_LB on FreeBSD).
It was reported that in scenarios where the networking threads are also
responsible for processing long-running tasks (like RPZ processing, CATZ
processing or large zone transfers), this could lead to intermitten
brownouts for some clients, because the thread assigned by the operating
system might be busy. In such scenarious, the overall performance would
be better served by threads competing over the sockets because the idle
threads can pick up the incoming traffic.
Add new configuration option (`load-balance-sockets`) to allow enabling
or disabling the load balancing of the sockets.
Previously, the task privileged mode has been used only when the named
was starting up and loading the zones from the disk as the "first" thing
to do. The privileged task was setup with quantum == 2, which made the
taskmgr/netmgr spin around the privileged queue processing two events at
the time.
The same effect can be achieved by setting the quantum to UINT_MAX (e.g.
practically unlimited) for the loadzone task, hence the privileged task
mode was removed in favor of just processing all the events on the
loadzone task in a single task_run().
In couple places, we have missed INSIST(0) or ISC_UNREACHABLE()
replacement on some branches with UNREACHABLE(). Replace all
ISC_UNREACHABLE() or INSIST(0) calls with UNREACHABLE().
This commit adds support for ISC_R_TLSBADPEERCERT error code, which is
supposed to be used to signal for TLS peer certificates verification
in dig and other code.
The support for this error code is added to our TLS and TLS DNS
implementations.
This commit also adds isc_nm_verify_tls_peer_result_string() function
which is supposed to be used to get a textual description of the
reason for getting a ISC_R_TLSBADPEERCERT error.
Previously, it was possible to assign a bit of memory space in the
nmhandle to store the client data. This was complicated and prevents
further refactoring of isc_nmhandle_t caching (future work).
Instead of caching the data in the nmhandle, allocate the hot-path
ns_client_t objects from per-thread clientmgr memory context and just
assign it to the isc_nmhandle_t via isc_nmhandle_set().
Previously, the unreachable code paths would have to be tagged with:
INSIST(0);
ISC_UNREACHABLE();
There was also older parts of the code that used comment annotation:
/* NOTREACHED */
Unify the handling of unreachable code paths to just use:
UNREACHABLE();
The UNREACHABLE() macro now asserts when reached and also uses
__builtin_unreachable(); when such builtin is available in the compiler.
Gcc 7+ and Clang 10+ have implemented __attribute__((fallthrough)) which
is explicit version of the /* FALLTHROUGH */ comment we are currently
using.
Add and apply FALLTHROUGH macro that uses the attribute if available,
but does nothing on older compilers.
In one case (lib/dns/zone.c), using the macro revealed that we were
using the /* FALLTHROUGH */ comment in wrong place, remove that comment.
Instead of passing the "workers" variable back and forth along with
passing the single isc_nm_t instance, add isc_nm_getnworkers() function
that returns the number of netmgr threads are running.
Change the ns_interfacemgr and ns_taskmgr to utilize the newly acquired
knowledge.
When sock->closehandle_cb is set, we need to run nmhandle_detach_cb()
asynchronously to ensure correct order of multiple packets processing in
the isc__nm_process_sock_buffer(). When not run asynchronously, it
would cause:
a) out-of-order processing of the return codes from processbuffer();
b) stack growth because the next TCP DNS message read callback will
be called from within the current TCP DNS message read callback.
The sock->closehandle_cb is set to isc__nm_resume_processing() for TCP
sockets which calls isc__nm_process_sock_buffer(). If the read callback
(called from isc__nm_process_sock_buffer()->processbuffer()) doesn't
attach to the nmhandle (f.e. because it wants to drop the processing or
we send the response directly via uv_try_write()), the
isc__nm_resume_processing() (via .closehandle_cb) would call
isc__nm_process_sock_buffer() recursively.
The below shortened code path shows how the stack can grow:
1: ns__client_request(handle, ...);
2: isc_nm_tcpdns_sequential(handle);
3: ns_query_start(client, handle);
4: query_lookup(qctx);
5: query_send(qctcx->client);
6: isc__nmhandle_detach(&client->reqhandle);
7: nmhandle_detach_cb(&handle);
8: sock->closehandle_cb(sock); // isc__nm_resume_processing
9: isc__nm_process_sock_buffer(sock);
10: processbuffer(sock); // isc__nm_tcpdns_processbuffer
11: isc_nmhandle_attach(req->handle, &handle);
12: isc__nm_readcb(sock, req, ISC_R_SUCCESS);
13: isc__nm_async_readcb(NULL, ...);
14: uvreq->cb.recv(...); // ns__client_request
Instead, if 'sock->closehandle_cb' is set, we need to run detach the
handle asynchroniously in 'isc__nmhandle_detach', so that on line 8 in
the code flow above does not start this recursion. This ensures the
correct order when processing multiple packets in the function
'isc__nm_process_sock_buffer()' and prevents the stack growth.
When not run asynchronously, the out-of-order processing leaves the
first TCP socket open until all requests on the stream have been
processed.
If the pipelining is disabled on the TCP via `keep-response-order`
configuration option, named would keep the first socket in lingering
CLOSE_WAIT state when the client sends an incomplete packet and then
closes the connection from the client side.
Previously, the established TCP connections (both client and server)
would be gracefully closed waiting for the write timeout.
Don't wait for TCP connections to gracefully shutdown, but directly
reset them for faster shutdown.
Previously, there was a single per-socket write timer that would get
restarted for every new write. This turned out to be insufficient
because the other side could keep reseting the timer, and never reading
back the responses.
Change the single write timer to per-send timer which would in turn
reset the TCP connection on the first send timeout.
Previously the socket code would set the TCPv6 maximum segment size to
minimum value to prevent IP fragmentation for TCP. This was not yet
implemented for the network manager.
Implement network manager functions to set and use minimum MTU socket
option and set the TCP_MAXSEG socket option for both IPv4 and IPv6 and
use those to clamp the TCP maximum segment size for TCP, TCPDNS and
TLSDNS layers in the network manager to 1220 bytes, that is 1280 (IPv6
minimum link MTU) minus 40 (IPv6 fixed header) minus 20 (TCP fixed
header)
We already rely on a similar value for UDP to prevent IP fragmentation
and it make sense to use the same value for IPv4 and IPv6 because the
modern networks are required to support IPv6 packet sizes. If there's
need for small TCP segment values, the MTU on the interfaces needs to be
properly configured.
The IPV6_USE_MIN_MTU socket option directs the IP layer to limit the
IPv6 packet size to the minimum required supported MTU from the base
IPv6 specification, i.e. 1280 bytes. Many implementations of TCP
running over IPv6 neglect to check the IPV6_USE_MIN_MTU value when
performing MSS negotiation and when constructing a TCP segment despite
MSS being defined to be the MTU less the IP and TCP header sizes (60
bytes for IPv6). This leads to oversized IPv6 packets being sent
resulting in unintended Path Maximum Transport Unit Discovery (PMTUD)
being performed and to fragmented IPv6 packets being sent.
Add and use a function to set socket option to limit the MTU on IPv6
sockets to the minimum MTU (1280) both for UDP and TCP.
The current implementation of isc_queue uses Michael-Scott lock-free
queue that in turn uses hazard pointers. It was discovered that the way
we use the isc_queue, such complicated mechanism isn't really needed,
because most of the time, we either execute the work directly when on
nmthread (in case of UDP) or schedule the work from the matching
nmthreads.
Replace the current implementation of the isc_queue with a simple locked
ISC_LIST. There's a slight improvement - since copying the whole list
is very lightweight - we move the queue into a new list before we start
the processing and locking just for moving the queue and not for every
single item on the list.
NOTE: There's a room for future improvements - since we don't guarantee
the order in which the netievents are processed, we could have two lists
- one unlocked that would be used when scheduling the work from the
matching thread and one locked that would be used from non-matching
thread.
The isc__nmsocket_reset() was missing a case for raw TCP sockets (used
by RNDC and DoH) which would case a assertion failure when write timeout
would be triggered.
TCP sockets are now also properly handled in isc__nmsocket_reset().
When isc__nm_uvreq_t gets deactivated, it could be just put onto array
stack to be reused later to save some initialization time.
Unfortunately, this might hide some use-after-free errors.
Disable the inactive uvreqs caching when compiled with Address or
Thread Sanitizer.
When isc_nmhandle_t gets deactivated, it could be just put onto array
stack to be reused later to safe some initialization time.
Unfortunately, this might hide some use-after-free errors.
Disable the inactive handles caching when compiled with Address or
Thread Sanitizer.
The isc__nmsocket_t has locked array of isc_nmhandle_t that's not used
for anything. The isc__nmhandle_get() adds the isc_nmhandle_t to the
locked array (and resized if necessary) and removed when
isc_nmhandle_put() finally destroys the handle. That's all it does, so
it serves no useful purpose.
Remove the .ah_handles, .ah_size, and .ah_frees members of the
isc__nmsocket_t and .ah_pos member of the isc_nmhandle_t struct.
When the TCP, TCPDNS or TLSDNS connection times out, the isc__nm_uvreq_t
would be pushed into sock->inactivereqs before the uv_tcp_connect()
callback finishes. Because the isc__nmsocket_t keeps the list of
inactive isc__nm_uvreq_t, this would cause use-after-free only when the
sock->inactivereqs is full (which could never happen because the failure
happens in connection timeout callback) or when the sock->inactivereqs
mechanism is completely removed (f.e. when running under Address or
Thread Sanitizer).
Delay isc__nm_uvreq_t deallocation to the connection callback and only
signal the connection callback should be called by shutting down the
libuv socket from the connection timeout callback.
The keep-response-order option has been obsoleted, and in this commit,
remove the keep-response-order ACL map rendering the option no-op, the
call the isc_nm_sequential() and the now unused isc_nm_sequential()
function itself.
There was an artificial limit of 23 on the number of simultaneous
pipelined queries in the single TCP connection. The new network
managers is capable of handling "unlimited" (limited only by the TCP
read buffer size ) queries similar to "unlimited" handling of the DNS
queries receive over UDP.
Don't limit the number of TCP queries that we can process within a
single TCP read callback.
When invalid DNS message is received, there was a handling mechanism for
DoH that would be called to return proper HTTP response.
Reuse this mechanism and reset the TCP connection when the client is
blackholed, DNS message is completely bogus or the ns_client receives
response instead of query.
In some situations (unit test and forthcoming XFR timeouts MR), we need
to modify the write timeout independently of the read timeout. Add a
isc_nmhandle_setwritetimeout() function that could be called before
isc_nm_send() to specify a custom write timeout interval.
When the outgoing TCP write buffers are full because the other party is
not reading the data, the uv_write() could wait indefinitely on the
uv_loop and never calling the callback. Add a new write timer that uses
the `tcp-idle-timeout` value to interrupt the TCP connection when we are
not able to send data for defined period of time.
Before adding the write timer, we have to remove the generic sock->timer
to sock->read_timer. We don't touch the function names to limit the
impact of the refactoring.
Some operating systems (OpenBSD and DragonFly BSD) don't restrict the
IPv6 sockets to sending and receiving IPv6 packets only. Explicitly
enable the IPV6_V6ONLY socket option on the IPv6 sockets to prevent
failures from using the IPv4-mapped IPv6 address.
Previously, the netmgr/udp.c tried to detect the recvmmsg detection in
libuv with #ifdef UV_UDP_<foo> preprocessor macros. However, because
the UV_UDP_<foo> are not preprocessor macros, but enum members, the
detection didn't work. Because the detection didn't work, the code
didn't have access to the information when we received the final chunk
of the recvmmsg and tried to free the uvbuf every time. Fortunately,
the isc__nm_free_uvbuf() had a kludge that detected attempt to free in
the middle of the receive buffer, so the code worked.
However, libuv 1.37.0 changed the way the recvmmsg was enabled from
implicit to explicit, and we checked for yet another enum member
presence with preprocessor macro, so in fact libuv recvmmsg support was
never enabled with libuv >= 1.37.0.
This commit changes to the preprocessor macros to autoconf checks for
declaration, so the detection now works again. On top of that, it's now
possible to cleanup the alloc_cb and free_uvbuf functions because now,
the information whether we can or cannot free the buffer is available to
us.
This commit converts the license handling to adhere to the REUSE
specification. It specifically:
1. Adds used licnses to LICENSES/ directory
2. Add "isc" template for adding the copyright boilerplate
3. Changes all source files to include copyright and SPDX license
header, this includes all the C sources, documentation, zone files,
configuration files. There are notes in the doc/dev/copyrights file
on how to add correct headers to the new files.
4. Handle the rest that can't be modified via .reuse/dep5 file. The
binary (or otherwise unmodifiable) files could have license places
next to them in <foo>.license file, but this would lead to cluttered
repository and most of the files handled in the .reuse/dep5 file are
system test files.
The isc_queue_new() was using dirty tricks to allocate the head and tail
members of the struct aligned to the cacheline. We can now use
isc_mem_get_aligned() to allocate the structure to the cacheline
directly.
Use ISC_OS_CACHELINE_SIZE (64) instead of arbitrary ALIGNMENT (128), one
cacheline size is enough to prevent false sharing.
Cleanup the unused max_threads variable - there was actually no limit on
the maximum number of threads. This was changed a while ago.
On FreeBSD, the pthread primitives are not solely allocated on stack,
but part of the object lives on the heap. Missing pthread_*_destroy
causes the heap memory to grow and in case of fast lived object it's
possible to run out-of-memory.
Properly destroy the leaking mutex (worker->lock) and
the leaking condition (sock->cond).
Previously, when TCP accept failed, we have logged a message with
ISC_LOG_ERROR level. One common case, how this could happen is that the
client hits TCP client quota and is put on hold and when resumed, the
client has already given up and closed the TCP connection. In such
case, the named would log:
TCP connection failed: socket is not connected
This message was quite confusing because it actually doesn't say that
it's related to the accepting the TCP connection and also it logs
everything on the ISC_LOG_ERROR level.
Change the log message to "Accepting TCP connection failed" and for
specific error states lower the severity of the log message to
ISC_LOG_INFO.
This commit adds an isc_nm_socket_type() function which can be used to
obtain a handle's socket type.
This change obsoletes isc_nm_is_tlsdns_handle() and
isc_nm_is_http_handle(). However, it was decided to keep the latter as
we eventually might end up supporting multiple HTTP versions.
Change 5756 (GL #2854) introduced build errors when using
'configure --disable-doh'. To fix this, isc_nm_is_http_handle() is
now defined in all builds, not just builds that have DoH enabled.
Missing code comments were added both for that function and for
isc_nm_is_tlsdns_handle().
This commit adds an isc_nm_set_min_answer_ttl() function which is
intended to to be used to give a hint to the underlying transport
regarding the answer TTL.
The interface is intentionally kept generic because over time more
transports might benefit from this functionality, but currently it is
intended for DoH to set "max-age" value within "Cache-Control" HTTP
header (as recommended in the RFC8484, section 5.1 "Cache
Interaction").
It is no-op for other DNS transports for the time being.
it is possible for udp_recv_cb() to fire after the socket
is already shutting down and statichandle is NULL; we need to
create a temporary handle in this case.
