mir/lm-sensors
2
0
Fork 0
mirror of https://github.com/lm-sensors/lm-sensors synced 2025-08-31 06:15:15 +00:00
Code Issues Releases Wiki Activity

Skip MINSTOP and MINSTART tests if fan can't stop.

Browse Source 
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@5328 7894878c-1315-0410-8ee3-d5d059ff63e0
This commit is contained in:
Jean Delvare
2008-09-09 13:15:04 +00:00
parent 346159764f
commit 012aae9b58
2 changed files with 49 additions and 25 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
CHANGES
View File

@@ -11,6 +11,7 @@ SVN-HEAD
Print the revision and date at start-up
Detect and report obviously incorrect fan speeds
Determine MINSTOP automatically
Skip MINSTOP and MINSTART tests if fan can't stop
sensors-detect: Add Intel SCH (bus) support
Add SMSC EMC6D103 support
Improve MAX6657, MAX6658, MAX6659 detection

73
prog/pwm/pwmconfig
View File

@@ -453,8 +453,10 @@ do
let pwmactivecount=1
pwmactive="$i ${pwmactive}"
fanactive="$j ${fanactive}"
fanactive_min="$S ${fanactive_min}"
else
fanactive="$j+${fanactive}" #not supported yet by fancontrol
fanactive_min="$S+${fanactive_min}"
fi
sleep $DELAY
if [ $? -ne 0 ]
@@ -756,6 +758,7 @@ select pwms in $pwmactive "Change INTERVAL" "Just quit" "Save and quit" "Show co
echo "$j $S"
done
FAN=`echo $fanactive|cut -d' ' -f$REPLY`
FAN_MIN=`echo $fanactive_min|cut -d' ' -f$REPLY`
FCFANS="`echo $FCFANS | sed -e "s/${pwmsed}[^ ]* *//g"` ${pwms}=$FAN"
echo
echo "Select a temperature sensor as source for ${pwms}:"
@@ -800,18 +803,25 @@ select pwms in $pwmactive "Change INTERVAL" "Just quit" "Save and quit" "Show co
else
MAXTEMP="`echo $MAXTEMP | sed -e "s/${pwmsed}[^ ]* *//g"` ${pwms}=${XMT}"
fi
echo
echo "Enter the minimum PWM value (0-$MAX)"
echo -n "at which the fan STOPS spinning (press t to test) ($DEFMINSTOP): "
read XMSTOP
if [ "$XMSTOP" = "" ]
if [ $FAN_MIN -eq 0 ]
then
XMSTOP=$DEFMINSTOP
fi
if [ "$XMSTOP" = "t" -o "$XMSTOP" = "T" ]
then
TestMinStop $FAN
XMSTOP=$fanval
echo
echo "Enter the minimum PWM value (0-$MAX)"
echo -n "at which the fan STOPS spinning (press t to test) ($DEFMINSTOP): "
read XMSTOP
if [ "$XMSTOP" = "" ]
then
XMSTOP=$DEFMINSTOP
fi
if [ "$XMSTOP" = "t" -o "$XMSTOP" = "T" ]
then
TestMinStop $FAN
XMSTOP=$fanval
fi
else
XMSTOP=0
fi
if [ "$MINSTOP" = "" ]
then
@@ -819,29 +829,42 @@ select pwms in $pwmactive "Change INTERVAL" "Just quit" "Save and quit" "Show co
else
MINSTOP="`echo $MINSTOP | sed -e "s/${pwmsed}[^ ]* *//g"` ${pwms}=${XMSTOP}"
fi
echo
echo "Enter the minimum PWM value ($XMSTOP-$MAX)"
echo -n "at which the fan STARTS spinning (press t to test) ($DEFMINSTART): "
read XMSTART
if [ "$XMSTART" = "" ]
if [ $FAN_MIN -eq 0 ]
then
echo
echo "Enter the minimum PWM value ($XMSTOP-$MAX)"
echo -n "at which the fan STARTS spinning (press t to test) ($DEFMINSTART): "
read XMSTART
if [ "$XMSTART" = "" ]
then
XMSTART=$DEFMINSTART
fi
if [ "$XMSTART" = "t" -o "$XMSTART" = "T" ]
then
TestMinStart $XMSTOP
XMSTART=$fanval
fi
else
XMSTART=$DEFMINSTART
fi
if [ "$XMSTART" = "t" -o "$XMSTART" = "T" ]
then
TestMinStart $XMSTOP
XMSTART=$fanval
fi
if [ "$MINSTART" = "" ]
then
MINSTART="${pwms}=${XMSTART}"
else
MINSTART="`echo $MINSTART | sed -e "s/${pwmsed}[^ ]* *//g"` ${pwms}=${XMSTART}"
fi
echo
echo "Enter the PWM value (0-$XMSTOP) to use when the temperature"
echo -n "is below the low temperature limit (0): "
read XMINP
if [ $XMSTOP -gt 0 ]
then
echo
echo "Enter the PWM value (0-$XMSTOP) to use when the temperature"
echo -n "is below the low temperature limit (0): "
read XMINP
else
XMINP=""
fi
if [ -n "$XMINP" ]
then
if [ "$MINPWM" = "" ]