mir/lm-sensors
2
0
Fork 0
mirror of https://github.com/lm-sensors/lm-sensors synced 2025-08-30 05:48:07 +00:00
Code Issues Releases Wiki Activity

Drop all references to the old mailing list.

Browse Source 
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3075 7894878c-1315-0410-8ee3-d5d059ff63e0
This commit is contained in:
Jean Delvare 2005-09-08 16:29:41 +00:00
parent 2c48b2afc9
commit 28f8be1038
21 changed files with 29 additions and 57 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
BUGS
View File

@ -1,6 +1,6 @@
Except for many unimplemented things (listed in the TODO file), there may be Except for many unimplemented things (listed in the TODO file), there may be
true bugs too. If you experience any problems not listed here, true bugs too. If you experience any problems not listed here,
do not hesitate to mail sensors@stimpy.netroedge.com. do not hesitate to mail us (see http://secure.netroedge.com/~lm78/author.html).
But read this file and doc/FAQ first, please! But read this file and doc/FAQ first, please!
============================================================================ ============================================================================

4
CONTRIBUTORS
View File

@ -1,7 +1,7 @@
This package could not have been created without the help of many, many people. This package could not have been created without the help of many, many people.
The most notable contributors are listed below. You are probably best off The most notable contributors are listed below. You are probably best off
to mail <sensors@stimpy.netroedge.com> if you have questions, suggestions or to use the mailing list (see http://secure.netroedge.com/~lm78/author.html)
problems. if you have questions, suggestions or problems.
* Alexander Larsson <alla@lysator.liu.se> * Alexander Larsson <alla@lysator.liu.se>
Wrote the original lm78 module; lm_sensors version 1 was no more than an Wrote the original lm78 module; lm_sensors version 1 was no more than an

10
README
View File

@ -163,11 +163,11 @@ are too many mainboards to keep a list of busses and chips used on them.
On the other hand, we provide a program called 'sensors-detect' which On the other hand, we provide a program called 'sensors-detect' which
tries to figure out what hardware is available on your system. tries to figure out what hardware is available on your system.
The developers of this package can be reached through the mailing-list The developers of this package can be reached through a mailing-list
<sensors@stimpy.netroedge.com>. Do not hesitate to mail us if you have (see http://secure.netroedge.com/~lm78/author.html). Do not hesitate
questions, suggestions, problems, want to contribute, or just want to to mail us if you have questions, suggestions, problems, want to
report it works for you. But please try to read the documentation and contribute, or just want to report it works for you. But please try to
FAQ before you ask any questions! read the documentation and FAQ before you ask any questions!
The latest version of this package can always be found on our homepage: The latest version of this package can always be found on our homepage:
http://secure.netroedge.com/~lm78/. Pre-release versions can be retrieved http://secure.netroedge.com/~lm78/. Pre-release versions can be retrieved

2
README.package
View File

@ -29,4 +29,4 @@ and INSTALLs in i2c and lm_sensors2.
Enjoy! Enjoy!
-- The Lm_sensors Development Team <sensors@stimpy.netroedge.com> -- The Lm_sensors Development Team

2
README.patches
View File

@ -27,4 +27,4 @@ The patches must be applied in this order: i2c then lm_sensors
Enjoy! Enjoy!
-- The Lm_sensors Development Team <sensors@stimpy.netroedge.com> -- The Lm_sensors Development Team

3
RPM/lm_sensors.spec
View File

@ -47,8 +47,7 @@ Docdir: %{prefix}/doc
Requires: %{name}-drivers >= %{ver} Requires: %{name}-drivers >= %{ver}
Url: http://www.netroedge.com/~lm78/ Url: http://www.netroedge.com/~lm78/
##For officially distributed packages, please sign below #Packager: Your Name <your@address>
##Packager: Lm_sensors Group <sensors@stimpy.netroedge.com>
%package drivers %package drivers
Summary: Chip and bus drivers for general SMBus access and hardware monitoring. Summary: Chip and bus drivers for general SMBus access and hardware monitoring.

3
doc/busses/i2c-sis5595
View File

@ -54,6 +54,3 @@ A BUS driver is used by other CHIP drivers to access chips on the bus.
To install this driver, simply do To install this driver, simply do
# modprobe i2c-sis5595 # modprobe i2c-sis5595
This driver is ALPHA!!!
Please send feedback to us at sensors@stimpy.netroedge.com.

6
doc/busses/i2c-sis630
View File

@ -47,9 +47,9 @@ Note: kernel versions later than 2.4.18 not tested.
If anyone owns a board with those chips AND is willing to risk crashing & If anyone owns a board with those chips AND is willing to risk crashing &
burning an otherwise well-behaved kernel in the name of progress... please burning an otherwise well-behaved kernel in the name of progress... please
contact me at <amalysh@web.de> or via the project's mailing list: contact me at <amalysh@web.de> or via the project's mailing list: see
<sensors@stimpy.netroedge.com>. Please send bug reports and/or success http://secure.netroedge.com/~lm78/author.html. Please send bug reports
stories as well. and/or success stories as well.
Thank Yous Thank Yous

4
doc/busses/i2c-sis645
View File

@ -56,8 +56,8 @@ as well: 635, and 635T.
If anyone owns a board with those chips AND is willing to risk crashing & If anyone owns a board with those chips AND is willing to risk crashing &
burning an otherwise well-behaved kernel in the name of progress... please burning an otherwise well-behaved kernel in the name of progress... please
contact me at <mhoffman@lightlink.com> or via the project's mailing list: contact me at <mhoffman@lightlink.com> or via the project's mailing list:
<sensors@stimpy.netroedge.com>. Please send bug reports and/or success see http://secure.netroedge.com/~lm78/author.html. Please send bug reports
stories as well. and/or success stories as well.
TO DOs TO DOs

2
doc/chips/SUMMARY
View File

@ -13,7 +13,7 @@ run prog/detect/sensors-detect.
If your sensor chip is not detected by sensors-detect If your sensor chip is not detected by sensors-detect
or supported by this package, or supported by this package,
please send mail to sensors@stimpy.netroedge.com. please send mail (see http://secure.netroedge.com/~lm78/author.html)
Please include the following in your mail: Please include the following in your mail:
- The output of (as root) 'prog/detect/sensors-detect' - The output of (as root) 'prog/detect/sensors-detect'

3
doc/chips/icspll
View File

@ -87,8 +87,7 @@ RESULTS
If you try this on a supported configuration, If you try this on a supported configuration,
please report your clock chip, your SMBus chip please report your clock chip, your SMBus chip
(piix4 or ali15x3), and the results of (piix4 or ali15x3), and the results of
'cat /proc/sys/dev/sensors/icspll-i2c-*-69/reg0-6' to 'cat /proc/sys/dev/sensors/icspll-i2c-*-69/reg0-6'
sensors@stimpy.netroedge.com.
TO DO TO DO

5
doc/chips/mtp008
View File

@ -71,8 +71,3 @@ Sensor selection is as follows:
1 Analog input (not for temperature sensing) 2,3 1 Analog input (not for temperature sensing) 2,3
2 Thermistor 1,2,3 2 Thermistor 1,2,3
3 Pentium diode 1,2 3 Pentium diode 1,2
Maintainer
-----------------
Send requests to the sensors@stimpy.netroedge.com mailing list.

1
doc/chips/w83627hf
View File

@ -92,4 +92,3 @@ Author/Maintainer
----------------- -----------------
Mark D. Studebaker (mdsxyz123@yahoo.com). Mark D. Studebaker (mdsxyz123@yahoo.com).
Derived from the w83781d driver. Derived from the w83781d driver.
Send requests to the sensors@stimpy.netroedge.com mailing list.

3
doc/chips/w83781d
View File

@ -599,9 +599,8 @@ register in Bank0.CR51 of W83781D.
Author/Maintainer Author/Maintainer
----------------- -----------------
Original 781D support: Frodo and Phil (sensors@stimpy.netroedge.com) Original 781D support: Frodo and Phil
782D/783S support added by: Mark D. Studebaker (mdsxyz123@yahoo.com) 782D/783S support added by: Mark D. Studebaker (mdsxyz123@yahoo.com)
Send requests to the sensors@stimpy.netroedge.com mailing list.
Asus Clones Asus Clones

1
doc/chips/xeontemp
View File

@ -106,4 +106,3 @@ Author/Maintainer
Mark D. Studebaker (mdsxyz123@yahoo.com). Mark D. Studebaker (mdsxyz123@yahoo.com).
Derived from the adm1021 driver. Derived from the adm1021 driver.
Thanks to Philip Pokorny for help with this document. Thanks to Philip Pokorny for help with this document.
Send requests to the sensors@stimpy.netroedge.com mailing list.

9
doc/developers/new_drivers
View File

@ -136,10 +136,11 @@ steps apply.
* If you want to have your driver integrated to Linux 2.6, you have to * If you want to have your driver integrated to Linux 2.6, you have to
port your driver to the new sysfs interface. Once done and preferably port your driver to the new sysfs interface. Once done and preferably
after testing, submit a patch to the Linux kernel mailing list after testing, submit a patch to our mailing list: see
<linux-kernel at vger dot kernel dot org>, our mailing list http://secure.netroedge.com/~lm78/author.html
<sensors at stimpy dot netroedge.com>,and Greg KH (greg at kroah Make sure to check the current status for your driver first:
dot com). http://secure.netroedge.com/~lm78/kernel26.html
http://secure.netroedge.com/~lm78/newdrivers.html
--------------------------------------------------------------------- ---------------------------------------------------------------------
Checklist for us to do on the webpage: Checklist for us to do on the webpage:

4
doc/donations
View File

@ -11,8 +11,8 @@ Donation of usable computer hardware also supports the project in general,
so hardware which isn't directly related to the development of a hardware so hardware which isn't directly related to the development of a hardware
monitoring driver, but can be used to build test systems, is welcome too. monitoring driver, but can be used to build test systems, is welcome too.
If you would like to make a donation, please contact us at If you would like to make a donation, please contact us. See
sensors@stimpy.netroedge.com. Thanks! http://secure.netroedge.com/~lm78/author.html. Thanks!
Donations are listed in chronological order. Note that the person mentioned Donations are listed in chronological order. Note that the person mentioned

4
doc/useful_addresses.html
View File

@ -285,10 +285,6 @@ implementations. Please report any other references you have found!</p>
(ASF) specification</a> (ASF) specification</a>
<br />A standard for system management messages using the SMBus <br />A standard for system management messages using the SMBus
and passing this information to remote management devices. By the DMTF.</li> and passing this information to remote management devices. By the DMTF.</li>
<li><a href="http://archives.andrew.net.au/lm-sensors/">LM Sensors mailing list
archive</a>
<br />This is the mailing list archive for sensors@stimpy.netroedge.com,
the developer's mailing list. The archive contains messages since October 28, 2001.</li>
<li><a href="http://www.tip.net.au/~millerp/rmch/recu-make-cons-harm.html">Recursive <li><a href="http://www.tip.net.au/~millerp/rmch/recu-make-cons-harm.html">Recursive
make considered harmful</a> make considered harmful</a>
<br />A paper on which the version 2 Makefile is based.</li> <br />A paper on which the version 2 Makefile is based.</li>

2
prog/pwm/pwmconfig
View File

@ -9,7 +9,7 @@
# Verify that all fans are running at normal speed after this # Verify that all fans are running at normal speed after this
# program has exited!!! # program has exited!!!
# #
# Copyright 2003 The lm_sensors project <sensors@stimpy.netroedge.com> # Copyright 2003-2005 The lm_sensors project
# #
# This program is free software; you can redistribute it and/or modify # This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by # it under the terms of the GNU General Public License as published by

14
prog/rrd/README
View File

@ -79,15 +79,10 @@ INSTALLATION INSTRUCTIONS
to test to test
What to do for help TROUBLESHOOTING
------------------- ---------------
RRD problems: See the RRD documentation RRD problems: See the RRD documentation
lm_sensors problems: See the lm_sensors FAQ and other documentation,
enter a support ticket on our
web page http://www.lm-sensors.nu or email us at
sensors@stimpy.netroedge.com
Cron problems: check the cron logs, maybe your cron format Cron problems: check the cron logs, maybe your cron format
is different or you need to signal the cron daemon? is different or you need to signal the cron daemon?
@ -103,11 +98,6 @@ What to do for help
including the line including the line
Options ExecCGI Options ExecCGI
Problems with these scripts:
Enter a support ticket on our
web page http://www.lm-sensors.nu or email us at
sensors@stimpy.netroedge.com
Removing the "RRDTOOL / TOBI OETIKER" tag in RRD graphs: Removing the "RRDTOOL / TOBI OETIKER" tag in RRD graphs:
Comment out the line Comment out the line
gator(gif, (int) im->xgif-5, 5); gator(gif, (int) im->xgif-5, 5);

2
prog/tellerstats/README
View File

@ -6,8 +6,6 @@ with Changes by
Mark D. Studebaker <mdsxyz123@yahoo.com> and Mark D. Studebaker <mdsxyz123@yahoo.com> and
Hans Ecke <hans@ecke.ws> Hans Ecke <hans@ecke.ws>
Send requests to the lm_sensors mailing list sensors@stimpy.netroedge.com.
Required Utilities and Packages: Required Utilities and Packages: