mir/lm-sensors
2
0
Fork 0
mirror of https://github.com/lm-sensors/lm-sensors synced 2025-08-31 14:25:39 +00:00
Code Issues Releases Wiki Activity

ADM1021/MAX1617 now reports the right driver;

Browse Source 
Winbond now correctly detected.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@260 7894878c-1315-0410-8ee3-d5d059ff63e0
This commit is contained in:
Frodo Looijaard
1999-02-20 01:15:00 +00:00
parent 2109930938
commit 5aa9472f10
2 changed files with 10 additions and 8 deletions
Download Patch File Download Diff File Expand all files Collapse all files

9
prog/detect/detect.pl
View File

@@ -153,13 +153,13 @@ use subs qw(lm78_detect lm75_detect lm80_detect w83781d_detect
},
{
name => "Analog Devices ADM1021",
driver => "adm9240",
driver => "adm1021",
i2c_addrs => [0x18..0x1b,0x29..0x2b,0x4c..0x4e],
i2c_detect => sub { adm1021_detect 0, @_ },
},
{
name => "Maxim MAX1617",
driver => "adm9240",
driver => "adm1021",
i2c_addrs => [0x18..0x1b,0x29..0x2b,0x4c..0x4e],
i2c_detect => sub { adm1021_detect 1, @_ },
},
@@ -778,7 +778,8 @@ sub lm80_detect
# 0x4a: I2C addresses of emulated LM75 chips
# 0x4e: Vendor ID byte selection, and bank selection
# 0x4f: Vendor ID
# 0x58: Device ID (only when in bank 0)
# 0x58: Device ID (only when in bank 0); both 0x10 and 0x11 is seen
# though Winbond documents 0x10 only.
# Note: Fails if the W83781D is not in bank 0 (may succeed for bank 2; bank 1
# leaves almost all registers in an undefined state, too bad).
# Note: Detection overrules a previous LM78 detection
@@ -792,7 +793,7 @@ sub w83781d_detect
return unless (($reg1 & 0x80) == 0x00 and $reg2 == 0xa3) or
(($reg1 & 0x80) == 0x80 and $reg2 == 0x5c);
return if ($reg1 & 0x07) == 0x00 and
i2c_smbus_read_byte_data($file,0x58) != 0x10;
(i2c_smbus_read_byte_data($file,0x58) & 0xfe) != 0x10;
$reg1 = i2c_smbus_read_byte_data($file,0x4a);
@res = (8);
push @res, ($reg1 & 0x07) + 0x48 if $reg1 & 0x08;

9
prog/detect/sensors-detect
View File

@@ -153,13 +153,13 @@ use subs qw(lm78_detect lm75_detect lm80_detect w83781d_detect
},
{
name => "Analog Devices ADM1021",
driver => "adm9240",
driver => "adm1021",
i2c_addrs => [0x18..0x1b,0x29..0x2b,0x4c..0x4e],
i2c_detect => sub { adm1021_detect 0, @_ },
},
{
name => "Maxim MAX1617",
driver => "adm9240",
driver => "adm1021",
i2c_addrs => [0x18..0x1b,0x29..0x2b,0x4c..0x4e],
i2c_detect => sub { adm1021_detect 1, @_ },
},
@@ -778,7 +778,8 @@ sub lm80_detect
# 0x4a: I2C addresses of emulated LM75 chips
# 0x4e: Vendor ID byte selection, and bank selection
# 0x4f: Vendor ID
# 0x58: Device ID (only when in bank 0)
# 0x58: Device ID (only when in bank 0); both 0x10 and 0x11 is seen
# though Winbond documents 0x10 only.
# Note: Fails if the W83781D is not in bank 0 (may succeed for bank 2; bank 1
# leaves almost all registers in an undefined state, too bad).
# Note: Detection overrules a previous LM78 detection
@@ -792,7 +793,7 @@ sub w83781d_detect
return unless (($reg1 & 0x80) == 0x00 and $reg2 == 0xa3) or
(($reg1 & 0x80) == 0x80 and $reg2 == 0x5c);
return if ($reg1 & 0x07) == 0x00 and
i2c_smbus_read_byte_data($file,0x58) != 0x10;
(i2c_smbus_read_byte_data($file,0x58) & 0xfe) != 0x10;
$reg1 = i2c_smbus_read_byte_data($file,0x4a);
@res = (8);
push @res, ($reg1 & 0x07) + 0x48 if $reg1 & 0x08;