This commit fixes the warning issued by 'clang' when pointer is casted
to one with greater alignment.
Signed-off-by: Alex Wang <alexw@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
The ethertype should always be updated on mpls_pop
as there may be a transition between MPLS unicast (0x8847) and
MPLS multicast (0x8848).
Ben Pfaff tells me that this is consistent with the
behaviour described in EXT-194 of the JIRA bug tracker.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Ben Pfaff <blp@nicira.com>
The reserved multicast Ethernet addresses begin with 01:80:c2, not
01:08:c2.
Reported-by: Padmanabhan Krishnan <kprad1@yahoo.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Ethan Jackson <ethan@nicira.com>
There were plans to use this in conjunction with inner/outer flows,
however that plan has been changed in favour of using recirculation.
This leaves us with the current usage.
encal_dl_type is currently only used to allow decoding of packets used in
the test suite. However, this is a bit of a fudge and the packets may be
provided as hexadecimal instead.
Also remove comments from parse_l2_5_onward() relating to MPLS which are
not in keeping with the commenting throughout the rest of the function.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Jesse Gross <jesse@nicira.com>
This adds support for the OpenFlow 1.1+ dec_mpls_ttl action.
And also adds an NX dec_mpls_ttl action.
The handling of the TTL modification is entirely handled in userspace.
Reviewed-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Use the innermost dl_type when decoding L3 and L4 data from a packet.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Ben Pfaff <blp@nicira.com>
The ethertype should be set before resetting l2_5 in order
for the packet to be updated correctly.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Ben Pfaff <blp@nicira.com>
This patch implements use-space datapath and non-datapath code
to match and use the datapath API set out in Leo Alterman's patch
"user-space datapath: Add basic MPLS support to kernel".
The resulting MPLS implementation supports:
* Pushing a single MPLS label
* Poping a single MPLS label
* Modifying an MPLS lable using set-field or load actions
that act on the label value, tc and bos bit.
* There is no support for manipulating the TTL
this is considered future work.
The single-level push pop limitation is implemented by processing
push, pop and set-field/load actions in order and discarding information
that would require multiple levels of push/pop to be supported.
e.g.
push,push -> the first push is discarded
pop,pop -> the first pop is discarded
This patch is based heavily on work by Ravi K.
Cc: Ravi K <rkerur@gmail.com>
Reviewed-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Ben Pfaff <blp@nicira.com>
An ovs_be32 is a more obvious way to represent an IP address than a
pointer to one. It is also more type-safe, especially since "sparse" is
able to check that the argument is in network byte order.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Ethan Jackson <ethan@nicira.com>
Rarp packets had their own header definition in the packets
library. This doesn't make sense because they have the same packet
format as arps.
Signed-off-by: Ethan Jackson <ethan@nicira.com>
Commit c93f9a78c349 (packets: Update the reserved protocols list.) added
a number of first-hop router redundancy protocol MAC addresses to the
list of BPDU MAC addresses. This means that packets destined to those MAC
addresses are dropped when other-config:forward-bpdu is set to false on a
bridge (the default setting).
However, this behavior is incorrect, because these MAC addresses are not
special in the way that, say, STP frames are special. STP is a
switch-to-switch protocol that end hosts have no use for, but end hosts do
speak directly to routers on the MAC addresses assigned by VRRP and the
other protocols in this category. Therefore, dropping packets in this
category means that end hosts can no longer talk to their first-hop router,
if that router is running one of these protocols.
This commit also refines the match used for EDP and EAPS, and adds Cisco
CFM to the protocols that are dropped.
After this commit, the following destination MACs are dropped:
- 01:08:c2:00:00:00
- 01:08:c2:00:00:01
- 01:08:c2:00:00:02
- 01:08:c2:00:00:03
- 01:08:c2:00:00:04
- 01:08:c2:00:00:05
- 01:08:c2:00:00:06
- 01:08:c2:00:00:07
- 01:08:c2:00:00:08
- 01:08:c2:00:00:09
- 01:08:c2:00:00:0a
- 01:08:c2:00:00:0b
- 01:08:c2:00:00:0c
- 01:08:c2:00:00:0d
- 01:08:c2:00:00:0e
- 01:08:c2:00:00:0f
- 00:e0:2b:00:00:00
- 00:e0:2b:00:00:04
- 00:e0:2b:00:00:06
- 01:00:0c:00:00:00
- 01:00:0c:cc:cc:cc
- 01:00:0c:cc:cc:cd
- 01:00:0c💿cd:cd
- 01:00:0c:cc:cc:c0
- 01:00:0c:cc:cc:c1
- 01:00:0c:cc:cc:c2
- 01:00:0c:cc:cc:c3
- 01:00:0c:cc:cc:c4
- 01:00:0c:cc:cc:c5
- 01:00:0c:cc:cc:c6
- 01:00:0c:cc:cc:c7
Bug #12618.
CC: Ben Basler <bbasler@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
OF1.2 and later make these fields fully maskable so we might as well also.
Reviewed-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Ben Pfaff <blp@nicira.com>
OF1.1 and later make these fields fully maskable so we might as well also.
Reviewed-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Ben Pfaff <blp@nicira.com>
The name compose_rarp() more clearly describes what it's doing now.
Requested-by: Justin Pettit <jpettit@nicira.com>
Signed-off-by: Ethan Jackson <ethan@nicira.com>
Traditionally Open vSwitch had used 802.2 SNAP packets to update
upstream switch learning tables when necessary. This approach had
advantages in that debugging information could be embedded in the
packet helping hapless admins figure out what's going on. However,
since both qemu and VMware use RARP for this purpose, it seems
appropriate to fall in line with the defacto standard.
Requested-by: Ben Basler <bbasler@nicira.com>
Signed-off-by: Ethan Jackson <ethan@nicira.com>
The protocols added in this patch should be considered "reserved"
and not forward when "forward-bpdu" is false, nor should they be
mirrored.
Bug #11755.
Signed-off-by: Ethan Jackson <ethan@nicira.com>
Open vSwitch refuses to mirror certain destination addresses in
addition to those classified by eth_addr_is_reserved(). Looking
through the uses of eth_addr_is_reserved(), one finds that no
callers should be using the additional addresses which mirroring
drops. This patch folds the additional addresses dropped in the
mirroring code, into the more general eth_addr_is_reserverd()
function.
This patch also changes the implementation in a way that is
slightly less efficient, but much easier to read and extend int he
future.
Bug #11755.
Signed-off-by: Ethan Jackson <ethan@nicira.com>
Arbitrary ethernet mask support is one step on the way to support for OpenFlow
1.1+. This patch set seeks to add this capability without breaking current
protocol support.
Signed-off-by: Joe Stringer <joe@wand.net.nz>
[blp@nicira.com made some updates, see
http://openvswitch.org/pipermail/dev/2012-May/017585.html]
Signed-off-by: Ben Pfaff <blp@nicira.com>
With OpenFlow 1.1 requiring arbitrary ethernet match support, it simplifies
other code if we have some extra helper functions. This patch adds
eth_mask_is_exact(mask), eth_addr_bitand(src, mask, dst),
eth_addr_equal_except(a, b, mask) and eth_format_masked(eth, mask, output).
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Replaced all instances of Nicira Networks(, Inc) to Nicira, Inc.
Feature #10593
Signed-off-by: Raju Subramanian <rsubramanian@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Commit 11460e2316b88f0bd0ea0005d94338d800ea16bd
(flow: Enable retrieval of TCP flags from IPv6 traffic.) updated
one of the TCP flags extraction functions in userspace but missed
the other. This updates that function and converts the other to
use it to reduce duplication.
Bug #10194
Signed-off-by: Jesse Gross <jesse@nicira.com>
This commit pulls code used to modify L3 and L4 header fields
from dp_netdev into the packet library. An additional user will
be added in a future commit.
Signed-off-by: Ethan Jackson <ethan@nicira.com>
Patch below fixes build on FreeBSD; tested on 10.0-CURRENT.
Signed-off-by: Edward Tomasz Napierala <trasz@FreeBSD.org>
Signed-off-by: Ben Pfaff <blp@nicira.com>
We had these functions scattered around the source tree anyway. packets.h
is a good place to centralize them.
I do plan to introduce some additional callers.
Currently the kernel vlan actions mirror those used by OpenFlow 1.0.
i.e. MODIFY and STRIP. More flexible approach is to have an action to
push a tag and pop a tag off, so that it can handle multiple levels of vlan
tags. Plus it aligns with newer version of OpenFlow.
As this patch replaces MODIFY with PUSH semantic, action
mapping done in userpace is fixed accordingly.
GSO handling for multiple levels of vlan tags is also added as
Jesse suggested before.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Jesse Gross <jesse@nicira.com>
The second call to ofpbuf_put_zeros() could cause the 'eth' pointer to
be invalidated.
It appears that this does not fix a real bug because the existing callers
all preallocate 128 bytes of tailroom, but the interface doesn't document
that requirement.
This commit generalizes compose_lacp_packet() into new
compose_packet() function. This new function will be used to send
CCM messages in future patches.
Creates new compose_lacp_pdu() from the old compose_lacp_packet()
function. This will allow a LACP PDU to be created without
necessarily knowing the Ethernet Source Address required for
generating the packet. Future patches rely on this functionality.
Hardware sets the default LACP partner information to 0 so this
commit follows. The collector delay is a more interesting
case. Hardware sets it to 32768 and Linux sets it to 0. The
collector delay relates to a part of the LACP protocol which we
don't implement so we follow Linux in this case.
This commit implements LACP, a protocol which allows directly
connected switches to automatically negotiate which links may
participate in bonds. This commit disables LACP by default. Once
sufficiently tested, LACP will be enabled in "active" mode on
bonded ports, and "passive" mode on all others.
Bug #4213.
Provides ability to match over IPv6 traffic in the same manner as IPv4.
Currently, the matching fields include:
- IPv6 source and destination addresses (ipv6_src and ipv6_dst)
- Traffic Class (nw_tos)
- Next Header (nw_proto)
- ICMPv6 Type and Code (icmp_type and icmp_code)
- TCP and UDP Ports over IPv6 (tp_src and tp_dst)
When defining IPv6 rules, the Nicira Extensible Match (NXM) extension to
OVS must be used.
Signed-off-by: Justin Pettit <jpettit@nicira.com>
Acked-by: Ben Pfaff <blp@nicira.com>
Datapath IDs are unsigned, but dpid_from_string() was parsing them as
signed integers, which caused high values to be capped at INT64_MAX.
Also, document that datapath IDs may not be all-zero.
Reported-by: Pankaj Thakkar <thakkar@nicira.com>
Reported-by: Teemu Koponen <koponen@nicira.com>
The length of a datapath was changed from 48 bits to 64 bits in OpenFlow
0.9. For parity, we increased the management id size to match.
NOTE: This is the final commit in the OpenFlow 0.9 set. Starting with
this commit, OVS is OpenFlow 0.9-compliant.
The bonding code in vswitch sends out gratuitous learning packets that
are supposed to teach switches but not cause anything else to happen on
the network. Some upcoming code wants to synthesize packets with similar
properties, so factor this code into a new function so that it can be
used in both places.
