Split the L3 and above portion of flow_extract() out into
flow_extract_l3_onwards() and call flow_extract_l3_onwards()
from flow_extract().
This is to allow re-extraction of l3 and higher information using
flow->encap_dl_type which may be set using information contained
in actions.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Ben Pfaff <blp@nicira.com>
The flow_format() function was incorrectly passing skb_priority
to the match_format() function. match_format() function instead
expects rule priority.
This issue was introduced with aa6c9932f2937fa9a2140ec1737668eb9105b0b5
(Change logging format for flows to that accepted by ofproto/trace).
Signed-off-by: Ansis Atteka <aatteka@nicira.com>
My previous 72e8bf28bb38e8816435c64859fb350215b6a9e6 (datapath:
add skb mark matching and set action) commit broke 32-bit builds.
This patch assures that size of struct flow is equal on both
32-bit and 64-bit architectures so that build asserts would
not fire anymore.
Acked-by: Ben Pfaff <blp@nicira.com>
Signed-off-by: Ansis Atteka <aatteka@nicira.com>
This patch adds support for skb mark matching and set action.
Acked-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: Ansis Atteka <aatteka@nicira.com>
With this commit, OVS will match the data in the RARP packets having
ethertype 0x8035, in the same way as the data in the ARP packets.
Signed-off-by: Mehak Mahajan <mmahajan@nicira.com>
The current code has a simple mapping between datapath and OpenFlow port
numbers (the port numbers were the same other than OFPP_LOCAL which maps
to datapath port 0). Since the translation was know at compile time,
this allowed different layers to easily translate between the two, so
the translation often occurred late.
A future commit will break this simple mapping, so this commit draws a
line between where datapath and OpenFlow port numbers are used. The
ofproto-dpif layer will be responsible for the translations. Callers
above will use OpenFlow port numbers. Providers below will use
datapath port numbers.
Signed-off-by: Justin Pettit <jpettit@nicira.com>
Thanks to Ben Pfaff for immediately pinpointing the likely location of
the issue.
Signed-off-by: Justin Pettit <jpettit@nicira.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Ben Pfaff <blp@nicira.com>
With this commit, the datapath will process the ARP header for
RARP packets. It also fixes a bug whereby if the ARP opcode is
something other than ARP request or reply, the key_len is not
adjusted to include ARP info.
Signed-off-by: Mehak Mahajan <mmahajan@nicira.com>
Acked-by: Jesse Gross <jesse@nicira.com>
flow_format() logs packets contents. However, the format used is not
the format accepted by ofproto/trace. Hence it becomes difficult to
trace the packets using the debugs printed. With this commit, the
logging of the packet contents is done in a format that is accepted
by ofproto/trace. This will make debugging easier.
Signed-off-by: Mehak Mahajan <mmahajan@nicira.com>
Acked-by: Ethan Jackson <ethan@nicira.com>
Commit 296e07ace0f (flow: Extend struct flow to contain tunnel outer
header.) changed the tunnel ID parameter of flow_extract() from an integer
passed by value to a structure passed by pointer. Before flow_extract()
reads the tunnel ID, it zeros the entire flow parameter. This means that,
if a caller passes the address of the tunnel member of the flow as the
tunnel ID, then flow_extract() zeros the tunnel data before it reads and
copies the tunnel data (that it just zeroed). The result is that the
tunnel data is ignored.
This commit fixes the problem by making the caller that did this use a
separate flow structure instead of trying to be clever.
Bug #13461.
CC: Pankaj Thakkar <thakkar@nicira.com>
Reported-by: Michael Hu <mhu@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Soon the kernel will begin supplying the information about the outer
IP header for tunneled packets and userspace will need to be able to
track it as part of the flow. For the time being this is only used
internally by OVS and not exposed outwards to OpenFlow. As a result,
this threads the information throughout userspace but simply stores
the existing tun_id in it.
Signed-off-by: Jesse Gross <jesse@nicira.com>
A cls_rule is 324 bytes on i386 now. The cost of a flow table lookup is
currently proportional to this size, which is going to continue to grow.
However, the required cost of a flow table lookup, with the classifier that
we currently use, is only proportional to the number of bits that a rule
actually matches. This commit implements that optimization by replacing
the match inside "struct cls_rule" by a sparse representation.
This reduces struct cls_rule to 100 bytes on i386.
There is still some headroom for further optimization following this
commit:
- I suspect that adding an 'n' member to struct miniflow would make
miniflow operations faster, since popcount() has some cost.
- It's probably possible to replace the "struct minimatch" in cls_rule
by just a "struct miniflow", since the cls_rule's cls_table has a
copy of the minimask.
- Some of the miniflow operations aren't well-optimized.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Now that "struct flow" and "struct flow_wildcards" have the same simple
and uniform structure, it's easy to handle common operations by just
iterating over the bits inside them.
Signed-off-by: Ben Pfaff <blp@nicira.com>
It's only used in a not-very-useful assertion in some test code. In
general, exact-match flows make very little sense anymore, and they're
basically on their way out.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Since we know these bytes are always 0 in both structures, we can use
faster functions that only work with full words.
Signed-off-by: Ben Pfaff <blp@nicira.com>
NXM and OpenFlow 1.2+ allow including the values of arbitrary flow metadata
in "packet-in" messages. Open vSwitch has until now always included all
the values of the metadata fields that it implements in NXT_PACKET_IN
messages.
However, this has at least two disadvantages:
- Most of the metadata fields tend to be zero most of the time, which
wastes space in the message.
- It means that controllers must be very liberal about accepting
fields that they know nothing about in packet-in messages, since any
switch upgrade could cause new fields to appear even if the
controller does nothing to give them nonzero values. (Controllers
have to be prepared to tolerate unknown fields in any case, but this
property makes unknown fields more likely to appear than otherwise.)
This commit changes Open vSwitch so that metadata fields whose values are
zero are not reported in packet-ins, fixing both problems. (This is
explicitly allowed by OpenFlow 1.2+.)
This commit mainly fixes a sort of internal conceptual dissonance centering
around struct flow_metadata. This structure is supposed to report the
metadata for a given flow. If you look at a flow, it has particular
metadata values; it doesn't have masks, and the idea of a mask for a
particular flow doesn't really make sense. However, struct flow_metadata
did have masks. This led to internal confusion; one can see this in, for
example, the following code removed by this commit in ofproto-dpif.c to
handle misses in the OpenFlow flow table:
/* Registers aren't meaningful on a miss. */
memset(pin.fmd.reg_masks, 0, sizeof pin.fmd.reg_masks);
What this code was really trying to say is that on a flow miss, the
registers are zero, so they shouldn't be included in the packet-in message.
It did manage to omit the registers, by marking them as "wild", but it is
conceptually more correct to simply omit them because they are zero (and
that's one effect of this commit).
Bug #12968.
Reported-by: Igor Ganichev <iganichev@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
OVS provides a utility to create ICMP packets for the purpose of
testing using ovs-appctl netdev-dummy/receive. These packets created
by flow_compose() earlier did not have the ICMP checksum in them.
With this commit, the checksum will be added to these test ICMP
packets.
Signed-off-by: Mehak Mahajan <mmahajan@nicira.com>
This probably means that some classifier functions based on the fragment
type of packets have never worked properly.
Signed-off-by: Ben Pfaff <blp@nicira.com>
OVS provides a utility to create IP packets for the purpose of testing
using ovs-appctl netdev-dummy/receive. These packets created by
flow_compose() earlier did not have the IP checksum in them. With this
commit, the checksum with be added to these test IP packets.
Signed-off-by: Mehak Mahajan <mmahajan@nicira.com>
The 'ip' variable in flow_compose() points to some memory allocated
in an ofpbuf. The ofpbuf is modified without making the necessary
updates to the location of 'ip' causing a potential wild memory
access.
Found by inspection.
Signed-off-by: Ethan Jackson <ethan@nicira.com>
OpenFlow 1.0 and 1.2 have notions of VLAN that are different
enough to warrant separate "meta-flow" fields, which this commit
adds.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Simon Horman <horms@verge.net.au>
This function is specific to the OF1.0 dl_vlan field, so name it
consistently.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Simon Horman <horms@verge.net.au>
[blp@nicira.com added NEWS, updated a few overlooked meta-flow bits]
Signed-off-by: Ben Pfaff <blp@nicira.com>
* Remove duplicate definition of OFP_VLAN_NONE
* Rename OFP_VLAN_NONE as OFP10_VLAN_NONE as it appears to be
only used by OpenFlow 1.0.
As suggested by Ben Pfaff.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Arbitrary ethernet mask support is one step on the way to support for OpenFlow
1.1+. This patch set seeks to add this capability without breaking current
protocol support.
Signed-off-by: Joe Stringer <joe@wand.net.nz>
[blp@nicira.com made some updates, see
http://openvswitch.org/pipermail/dev/2012-May/017585.html]
Signed-off-by: Ben Pfaff <blp@nicira.com>
Replaced all instances of Nicira Networks(, Inc) to Nicira, Inc.
Feature #10593
Signed-off-by: Raju Subramanian <rsubramanian@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
The 'tp_addr' field name is inappropriate because its not an
address, it's the transport port. Therefore tp is sufficient.
Signed-off-by: Ethan Jackson <ethan@nicira.com>
Every piece of code that may need to change whenever struct flow or struct
flow_wildcards changes, but might easily get overlooked, should have a
build assertion on the value of FLOW_WC_SEQ, but these functions did not.
Signed-off-by: Ben Pfaff <blp@nicira.com>
This priority's mean is completely different from the priority of an
OpenFlow rule, so it is confusing for it to have the same name.
We should be on the lookout for a less Linux-specific name, but this one
seems fine for now.
Signed-off-by: Ben Pfaff <blp@nicira.com>
We currently have a version of ipv6_skip_exthdr() which is
identical to the main one with the addition of fragment reporting.
We can propose our version for upstream and then use it directly
without duplication.
Signed-off-by: Jesse Gross <jesse@nicira.com>
Acked-by: Ben Pfaff <blp@nicira.com>
