Currently we only support 802.1q, so we can offload push action without
specifying any vlan type. Kernel will push 802.1q ethertype by default.
But to support QinQ, we need to tell what ethertype is in push action as
it could be 802.1ad.
Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Blocks, in tc classifiers, allow the grouping of multiple qdiscs with an
associated block id. Whenever a filter is added to/removed from this
block, the filter is added to/removed from all associated qdiscs.
Extend TC offload functions to take a block id as a parameter. If the id
is zero then the dqisc is not considered part of a block.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Previously, any rule that is offloaded via a netdev, not necessarily
to the HW, would be reported as "offloaded". This patch fixes this
misalignment, and introduces the 'dp' state, as follows:
rule is in HW via TC offload -> offloaded=yes dp:tc
rule is in not HW over TC DP -> offloaded=no dp:tc
rule is in not HW over OVS DP -> offloaded=no dp:ovs
To achieve this, the flows's 'offloaded' flag was encapsulated in a new
attrs struct, which contains the offloaded state of the flow and the
DP layer the flow is handled in, and instead of setting the flow's
'offloaded' state based solely on the type of dump it was acquired
via, for netdev flows it now sends the new attrs struct to be
collected along with the rest of the flow via the netdev, allowing
it to be set per flow.
For TC offloads, the offloaded state is set based on the 'in_hw' and
'not_in_hw' flags received from the TC as part of the flower. If no
such flag was received, due to lack of kernel support, it defaults
to true.
Signed-off-by: Gavi Teitz <gavi@mellanox.com>
Acked-by: Roi Dayan <roid@mellanox.com>
[simon: resolved conflict in lib/dpctl.man]
Signed-off-by: Simon Horman <simon.horman@netronome.com>
ICMP checksum is calculated from ICMP headers and data, so hardware doesn't
need to calculate it again because we only rewrite IP headers.
Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Currently, we support offloading of one output port. Remove that
limitation by use of mirred mirror action for all output ports,
except that the last one is mirred redirect action.
Signed-off-by: Chris Mi <chrism@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
When OVS DP passes the actions to TC library, we save all the
actions in data structure tc_flower and each action type has its
own field in tc_flower. So when TC library passes the actions to
kernel, actually the actions order is lost.
We add an actions array in tc_flower to keep the actions order
in this patch.
Signed-off-by: Chris Mi <chrism@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Also update the message to be more correct.
Before this commit if there were tc rules that are not of type
flower the log was getting filled quickyl with errors about it
and always appeared to the user when dumping flows from user space.
This commit moves the error to debug and logs it only once.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
"sparse" complains with the warning 'incorrect type in argument 1
(different base types)' in function nl_parse_flower_ip when parsing a key
flag and in function nl_msg_put_flower_options when writing the key
flag. Fix this by using network byte order when reading and writing key
flags to netlink messages.
Fixes: 83e86606 ("netdev-tc-offloads: Add support for IP fragmentation")
Signed-off-by: Ian Stokes <ian.stokes@intel.com>
Signed-off-by: Ben Pfaff <blp@ovn.org>
Acked-by: Roi Dayan <roid@mellanox.com>
Add support for frag no, first and later.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Shahar Klein <shahark@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Raise the error up instead of ignoring it.
Before this commit beside an error an incorrect rule was also printed.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
The tc_flower conversion struct does not consider the order of actions.
If an OvS rule matches on a tunnel (decap) and outputs to a new tunnel,
the netlink conversion to TC will add the set tunnel key action before the
unset, leading to an incorrect TC rule. This patch reorders the netlink
generation to ensure a decap is done before an encap if both exist.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Open vSwitch enables the GCC 7+ option that warns about fall-through
switch statements. This commit fixes newly introduced warnings.
Fixes: d6118e628988 ("netdev-tc-offloads: Verify csum flags on dump from tc")
Signed-off-by: Ben Pfaff <blp@ovn.org>
Acked-by: Paul Blakey <paulb@mellanox.com>
Currently we send the tc csum action even if it's not needed.
Fix that by sending it only if csum update flags isn't zero.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Fix the struct variable order to corrospond with
it's usage.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
On dump, parse and verify the tc csum action update flags
in the same way as we put them.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
We only support extended pedit keys for now, so it's the type we
expect. Skip the legacy ones instead.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
To be later used to implement ovs action set offloading.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellacom>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
To be used later for offloading rules matching on tcp_flags.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Acked-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Joe Stringer <joe@ovn.org>
Add matching on ip layer ttl, to be used later.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Acked-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Joe Stringer <joe@ovn.org>
Use sysconf(_SC_CLK_TCK) to read run time "number of clock ticks per
second" and use that to convert ticks to msecs.
This is how iproute does the conversion when parsing tc filters.
The system call is done only once.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: Ben Pfaff <blp@ovn.org>
Split dst/src_port and ipv4/ipv6 union so we can
distingush them easily for later features.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Ben Pfaff <blp@ovn.org>
Refactor nl_msg_put_flower_options to be more readable.
This commit doesn't change functionality.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Acked-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Ben Pfaff <blp@ovn.org>
Implement SCTP source and destination ports support for flower.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Acked-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Fix minor style variations and unnecessary includes.
Signed-off-by: Joe Stringer <joe@ovn.org>
Tested-by: Greg Rose <gvrose8192@gmail.com>
Acked-by: Greg Rose <gvrose8192@gmail.com>
Add a new configuration tc-policy option that controls tc
flower flag. Possible options are none, skip_sw, skip_hw.
The default is none which is to insert the rule both to sw and hw.
This option is only relevant if hw-offload is enabled.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Acked-by: Flavio Leitner <fbl@sysclose.org>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Add tc helper functions to query and manipulate the flower classifier.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Co-authored-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Roi Dayan <roid@mellanox.com>
Acked-by: Flavio Leitner <fbl@sysclose.org>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Those functions are just wrappers to available macros for readability.
Move them to tc.h to avoid function-call overhead.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Acked-by: Flavio Leitner <fbl@sysclose.org>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Use the available TC macros instead of 0xffff.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Acked-by: Flavio Leitner <fbl@sysclose.org>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Add tc module to expose tc operations to be used by other modules.
Move some tc related functions from netdev-linux.c to tc.c
This patch doesn't change any functionality.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Co-authored-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Roi Dayan <roid@mellanox.com>
Acked-by: Joe Stringer <joe@ovn.org>
Acked-by: Flavio Leitner <fbl@sysclose.org>
Signed-off-by: Simon Horman <simon.horman@netronome.com>