It might have been a useful optimization at one point to have FWW_*
correspond in OFPFW10_* where possible, but it doesn't seem worthwhile for
only 3 corresponding values. It also makes the code somewhat more
confusing.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Split OFPRAW_OFPST_AGGREGATE_REQUEST into OpenFlow 1.0 and 1.1+
versions.
This should be sufficient to allow adding encoding and decoding of
Open Flow 1.1 and 1.2 Aggregate Stats Request messages.
Encoding and decoding of Open Flow 1.1 and 1.2 Aggregate Stats Response
messages works using the existing code without modification.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Allow decoding of Open Flow 1.1 and 1.2 flow statistics request messages.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Ben Pfaff <blp@nicira.com>
NXM and OpenFlow 1.2+ allow including the values of arbitrary flow metadata
in "packet-in" messages. Open vSwitch has until now always included all
the values of the metadata fields that it implements in NXT_PACKET_IN
messages.
However, this has at least two disadvantages:
- Most of the metadata fields tend to be zero most of the time, which
wastes space in the message.
- It means that controllers must be very liberal about accepting
fields that they know nothing about in packet-in messages, since any
switch upgrade could cause new fields to appear even if the
controller does nothing to give them nonzero values. (Controllers
have to be prepared to tolerate unknown fields in any case, but this
property makes unknown fields more likely to appear than otherwise.)
This commit changes Open vSwitch so that metadata fields whose values are
zero are not reported in packet-ins, fixing both problems. (This is
explicitly allowed by OpenFlow 1.2+.)
This commit mainly fixes a sort of internal conceptual dissonance centering
around struct flow_metadata. This structure is supposed to report the
metadata for a given flow. If you look at a flow, it has particular
metadata values; it doesn't have masks, and the idea of a mask for a
particular flow doesn't really make sense. However, struct flow_metadata
did have masks. This led to internal confusion; one can see this in, for
example, the following code removed by this commit in ofproto-dpif.c to
handle misses in the OpenFlow flow table:
/* Registers aren't meaningful on a miss. */
memset(pin.fmd.reg_masks, 0, sizeof pin.fmd.reg_masks);
What this code was really trying to say is that on a flow miss, the
registers are zero, so they shouldn't be included in the packet-in message.
It did manage to omit the registers, by marking them as "wild", but it is
conceptually more correct to simply omit them because they are zero (and
that's one effect of this commit).
Bug #12968.
Reported-by: Igor Ganichev <iganichev@nicira.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Split OFPRAW_OFPST_FLOW_{REQUEST,REPLY} into OpenFlow 1.0 and 1.1+
versions.
This is in preparation for adding encoding and decoding of
Open Flow 1.1 & 1.2 messages.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Ben Pfaff <blp@nicira.com>
When encoding Open Flow 1.1 & 1.2 Port Mod Request messages
the port number should be converted to 32bits using
ofputil_port_to_ofp11() rather than htonl(). This ensures
that port numbers in the reserved range are translated correctly.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
[blp@nicira.com added support for hard_timeout, plus a test]
Signed-off-by: Ben Pfaff <blp@nicira.com>
ofputil_decode_flow_removed() doesn't yet support OF1.2 at all so that
piece is missing but this otherwise should be complete.
CC: Simon Horman <horms@verge.net.au>
Signed-off-by: Ben Pfaff <blp@nicira.com>
* Allow OXM matches which specified in OpenFlow 1.2.
Also allow them for OpenFlow 1.1 as there seems little reason not to.
* Pass padded_match_len parameter which if on NULL will be set to
the padded match len. This will be used when decoding flow statistics
response messages.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Ben Pfaff <blp@nicira.com>
OVS has all kinds of odd fields, e.g. registers, and it doesn't make sense
to try to match on all of them. This commit changes learning-switch to
only try to match on the fields defined by OpenFlow 1.0. That's still not
minimal, but it's more reasonable.
This commit should not have an immediately visible effect since
ovs-controller always sends OF1.0 format flows to the switch, and OF1.0
format flows don't have these extra fields. But in the future when we
add support for new protocols and flow formats to ovs-controller, it
will make a difference.
Signed-off-by: Ben Pfaff <blp@nicira.com>
In the case of Open Flow 1.2, which is currently the only
time that OXM is be used, there is a 4 byte header before
the match which needs to be taken into account when calculating
the pad length. This complicates nx_match pull and put somewhat.
This patch takes an approach suggested by Ben Pfaff to separate the
encoding of the match and the adding of padding and, in the case of OXM,
a header.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Ben Pfaff <blp@nicira.com>
As of Open Flow 1.1 what was the actions element of
struct switch_features becomes reserved. As such
it seems sensible to always decode it as zero.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Ben Pfaff <blp@nicira.com>
This comment is talking about the obsolete "tun_id_from_cookie" protocol
extension that we removed from OVS long ago.
Signed-off-by: Ben Pfaff <blp@nicira.com>
There are capabilities which are present in one, two and three
of Open Flow 1.0, 1.1 and 1.2. Update OFPC_COMMON to only include
capabilities that are present in all three Open Flow versions and
add ofputil_capabilities_mask() to return the mask of capabilities
for each version.
This does not cover OFPUTIL_C_STP and OFPUTIL_C_GROUP_STATS, which
both use capability bit 3 and are treated as special cases in
ofputil_encode_switch_features() and ofputil_decode_switch_features().
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Reduce scope of per-protocol variables in ofputil_encode_flow_mod()
These variables are only needed in one of the cases covered by the switch
statement and will increase in number as more cases (protocols) are
supported.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Add action bits for Open Flow 1.2, these are not the same as Open Flow 1.1.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Ben Pfaff <blp@nicira.com>
In Open Flow 1.0 switch_features has a capabilities field.
However, in Open Flow 1.1, 1.2 and 1.3 this field is reserved.
Thus it should not be read on decode and it seems most appropriate
to set as zero on encode.
This patch takes the approach of setting the features field to
all available features for Open Flow 1.1+. I am unsure if it would
be sufficient to just set it to zero.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Use an enum for ofp_version in ofp-util and ofp-msg.
This in conjunction with the use of switch() statements
allows the compiler to warn when a new ofp_version isn't handled.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Ben Pfaff <blp@nicira.com>
It now duplicates ofp_aggregate_stats_reply except for alignment issues, so
we might as well unify the code.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Tested-by: Simon Horman <horms@verge.net.au>
Reviewed-by: Simon Horman <horms@verge.net.au>
OpenFlow headers are not as uniform as they could be, with size, alignment,
and numbering changes from one version to another and across varieties
(e.g. ordinary messages vs. "stats" messages). Until now the Open vSwitch
internal APIs haven't done a good job of abstracting those differences in
header formats. This commit changes that; from this commit forward very
little code actually needs to understand the header format or numbering.
Instead, it can just encode or decode, or pull or put, the header using
a more abstract API using the ofpraw_, ofptype_, and other APIs in the
new ofp-msgs module.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Tested-by: Simon Horman <horms@verge.net.au>
Reviewed-by: Simon Horman <horms@verge.net.au>
Add OFPUTIL_P_OF12 and NXFF_OPENFLOW12 for Open Flow 1.2
OFPUTIL_P_OF12_TID and in turn OFPUTIL_P_OF12_ANY is not provided as
OFPUTIL_P_OF12 supports the use of table ids in modify flow messages.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
[blp@nicira.com added NEWS, updated a few overlooked meta-flow bits]
Signed-off-by: Ben Pfaff <blp@nicira.com>
