The curl profile allows reading and writing to /tmp/ so instead of
two rules that don't cover all tmp locations, switch to the user-tmp
abstraction to allow access to the various possible tmp locations.
Note: The does reduce the write permission to owner write, instead
of the wider file w /tmp/**,
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1773
Approved-by: Maxime Bélair <maxime.belair@canonical.com>
Merged-by: John Johansen <john@jjmx.net>
Due to a behavioral change between 6.14 and 6.15, the move_mount that we
set up in disconnected_mount_complain's open_tree test would now persist,
causing issues with test cleanup after that test. Ensure that we remount
all the mounts as private after unsharing the mount namespace to prevent
this from happening.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1779
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: John Johansen <john@jjmx.net>
test_show_unconfined_profiles did not exclude disabled profiles from the
expected results, which led to test failures when some profiles were
disabled.
Disabled profiles are now correctly excluded from the results, fixing the
test.
Reported-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: Maxime Bélair <maxime.belair@canonical.com>
Due to a behavioral change between 6.14 and 6.15, the move_mount that we
set up in disconnected_mount_complain's open_tree test would now persist,
causing issues with test cleanup after that test. Ensure that we remount
all the mounts as private after unsharing the mount namespace to prevent
this from happening.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
This ideally is a temporary fix because we do not want to allow all users
of curl to be able to access the snapd socket. However, this will work for
now until we can mediate the accesses better.
Fixes: LP: #2120669
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
The curl profile allows reading and writing to /tmp/ so instead of
two rules that don't cover all tmp locations, switch to the user-tmp
abstraction to allow access to the various possible tmp locations.
Note: The does reduce the write permission to owner write, instead
of the wider file w /tmp/**,
In addition move the @{HOME} permissions to be restricted files owned
by the user.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Fixes#449
Tkinter (used by aa-notify) needs the $XAUTHORITY envvar to start but on
some systems (e.g. OpenSuse), sudo clears it. This change add a
--xauthority command-line option to set it explicitly, so aa-notify works
under sudo.
Signed-off-by: Maxime Bélair <maxime.belair@canonical.com>
If both the --local commandline option and use_local_profiles
configuration are specified, the commandline now takes precedence.
Signed-off-by: Maxime Bélair <maxime.belair@canonical.com>
The current profile is for linking against libnuma. This
update adds the rules needed to get system information
when actually using libnuma functionality.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
aa-notify configuration now supports use_local_profiles, and this option
is documented in the manual.
Signed-off-by: Maxime Bélair <maxime.belair@canonical.com>
The new option --local allows user to write new rules to local profiles
instead of system profiles, enabling cleaner profile deployment.
This option support the values (yes, no and auto)
Signed-off-by: Maxime Bélair <maxime.belair@canonical.com>
This patch allows writing write in include files and save them to disk.
This is particularly helpful for local includes (generally used in
profiles through `include if exists <local/foo>`), and keeps the base
profile clean, avoiding breakages when the system updates profiles.
Signed-off-by: Maxime Bélair <maxime.belair@canonical.com>
For every item in "cases", a new state is created, but if the creation
of one of them fails, the rest of the items in that list would not be
deleted and would leak. Fix it by continuing to iterate over the items
in the list and delete them, and then re-throw the exception.
$ /usr/bin/valgrind --leak-check=full --error-exitcode=151 ../apparmor_parser -Q -I simple_tests/ -M ./features_files/features.all simple_tests/xtrans/x-conflict.sd
==564911== 208 (48 direct, 160 indirect) bytes in 1 blocks are definitely lost in loss record 15 of 19
==564911== at 0x4846FA3: operator new(unsigned long) (in /usr/libexec/valgrind/vgpreload_memcheck-amd64-linux.so)
==564911== by 0x179E74: CharNode::follow(Cases&) (expr-tree.h:447)
==564911== by 0x189F8B: DFA::update_state_transitions(optflags const&, State*) (hfa.cc:376)
==564911== by 0x18A25B: DFA::process_work_queue(char const*, optflags const&) (hfa.cc:442)
==564911== by 0x18CB65: DFA::DFA(Node*, optflags const&, bool) (hfa.cc:486)
==564911== by 0x178263: aare_rules::create_chfa(int*, std::vector<aa_perms, std::allocator<aa_perms> >&, optflags const&, bool, bool) (aare_rules.cc:258)
==564911== by 0x178A4F: aare_rules::create_dfablob(unsigned long*, int*, std::vector<aa_perms, std::allocator<aa_perms> >&, optflags const&, bool, bool) (aare_rules.cc:359)
==564911== by 0x14E4E1: process_profile_regex(Profile*) (parser_regex.c:791)
==564911== by 0x154CDF: process_profile_rules(Profile*) (parser_policy.c:194)
==564911== by 0x154E0F: post_process_profile(Profile*, int) (parser_policy.c:240)
==564911== by 0x154F7A: post_process_policy_list (parser_policy.c:257)
==564911== by 0x154F7A: post_process_policy(int) (parser_policy.c:267)
==564911== by 0x141B17: process_profile(int, aa_kernel_interface*, char const*, aa_policy_cache*) (parser_main.c:1227)
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/534
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
When the "conflicting x modifiers" exception was thrown, the DFA
object creation would fail, therefore the destructor would not be
called and the states previously allocated would leak.
Unfortunately there's no way to call the destructor if the object was
not created, so I moved the contents of the destructor into a cleanup
helper function to be called in both instances.
$ /usr/bin/valgrind --leak-check=full --error-exitcode=151 ../apparmor_parser -Q -I simple_tests/ -M ./features_files/features.all simple_tests/xtrans/x-conflict.sd
==564911== 592 (112 direct, 480 indirect) bytes in 1 blocks are definitely lost in loss record 16 of 19
==564911== at 0x4846FA3: operator new(unsigned long) (in /usr/libexec/valgrind/vgpreload_memcheck-amd64-linux.so)
==564911== by 0x189C9A: DFA::add_new_state(optflags const&, std::set<ImportantNode*, std::less<ImportantNode*>, std::allocator<ImportantNode*> >*, std::set<ImportantNode*, std::less<ImportantNode*>, std::allocator<ImportantNode*> >*, State*) (hfa.cc:337)
==564911== by 0x18CB22: add_new_state (hfa.cc:357)
==564911== by 0x18CB22: DFA::DFA(Node*, optflags const&, bool) (hfa.cc:473)
==564911== by 0x178263: aare_rules::create_chfa(int*, std::vector<aa_perms, std::allocator<aa_perms> >&, optflags const&, bool, bool) (aare_rules.cc:258)
==564911== by 0x178A4F: aare_rules::create_dfablob(unsigned long*, int*, std::vector<aa_perms, std::allocator<aa_perms> >&, optflags const&, bool, bool) (aare_rules.cc:359)
==564911== by 0x14E4E1: process_profile_regex(Profile*) (parser_regex.c:791)
==564911== by 0x154CDF: process_profile_rules(Profile*) (parser_policy.c:194)
==564911== by 0x154E0F: post_process_profile(Profile*, int) (parser_policy.c:240)
==564911== by 0x154F7A: post_process_policy_list (parser_policy.c:257)
==564911== by 0x154F7A: post_process_policy(int) (parser_policy.c:267)
==564911== by 0x141B17: process_profile(int, aa_kernel_interface*, char const*, aa_policy_cache*) (parser_main.c:1227)
==564911== by 0x135421: main (parser_main.c:1771)
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/534
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Valgrind showed that the disconnected paths variables were leaking
during the merge. That happened because flagvals did not implement a
destructor freeing the variables, so they leaked. flagvals cannot
implement a destructor, because that would make it a non-trivial union
member and parser_yacc.y would not compile. This patch implements a
"clear" function that is supposed to act as the destructor.
$ /usr/bin/valgrind --leak-check=full --error-exitcode=151 ../apparmor_parser -Q -I simple_tests/ -M ./features_files/features.all flags_ok_disconnected_ipc15.sd
...
==3708747== 5 bytes in 1 blocks are definitely lost in loss record 1 of 11
==3708747== at 0x4846828: malloc (in /usr/libexec/valgrind/vgpreload_memcheck-amd64-linux.so)
==3708747== by 0x492E35E: strdup (strdup.c:42)
==3708747== by 0x14C74E: set_disconnected_path (profile.h:188)
==3708747== by 0x14C74E: flagvals::init(char const*) (profile.h:223)
==3708747== by 0x14859B: yyparse() (parser_yacc.y:592)
==3708747== by 0x141A99: process_profile(int, aa_kernel_interface*, char const*, aa_policy_cache*) (parser_main.c:1187)
==3708747== by 0x135421: main (parser_main.c:1771)
...
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
GDM 49~beta implements a userdb VarLink service for managing the unix users
running the greeter shell, as well as the gnome-initial-setup users.
```
gdm-launch-environment][1892]: Gdm: GdmSessionWorker: determining if authenticated user (password required:0) is authorized to session
unix_chkpwd[1897]: could not obtain user info (gdm-greeter)
kernel: audit: type=1400 audit(1754399331.488:211): apparmor="DENIED" operation="connect" class="file" profile="unix-chkpwd" name="/run/systemd/userdb/org.gnome.DisplayManager" pid=1897 comm="unix_chkpwd" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0
gdm-launch-environment][1892]: Gdm: GdmSessionWorker: user is not authorized to log in: Authentication failure
```
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1761
Approved-by: Ryan Lee <rlee287@yahoo.com>
Merged-by: John Johansen <john@jjmx.net>
GDM 49~beta implements a userdb VarLink service for managing the unix users
running the greeter shell, as well as the gnome-initial-setup users.
gdm-launch-environment][1892]: Gdm: GdmSessionWorker: determining if authenticated user (password required:0) is authorized to session
unix_chkpwd[1897]: could not obtain user info (gdm-greeter)
kernel: audit: type=1400 audit(1754399331.488:211): apparmor="DENIED" operation="connect" class="file" profile="unix-chkpwd" name="/run/systemd/userdb/org.gnome.DisplayManager" pid=1897 comm="unix_chkpwd" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0
gdm-launch-environment][1892]: Gdm: GdmSessionWorker: user is not authorized to log in: Authentication failure
LP: #2119541
perms = 0, therefore perms & something is always false.
Fixes: coverity#320937 and coverity#320937
Also remove nop code from mnt_rule::post_parse_profile(Profile &prof) as discussed in this MR.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1759
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
When the variable was being expanded, it needed to be reevaluated to
check if there was still unresolved variables. That allowed for a
weird bug to happen: If the string contained a variable preceded by @,
like in "user@@{uid}" and the variable was resolved to a case where {
is used, like in @{uid}={[0-9],[1-9][0-9]}, then on the second pass,
the parser would try to resolve the following variable
@{[0-9],[1-9][0-9]}, which is incorrect behavior. Fix it by not
including part of the string that was already resolved on the
subsequent passes.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1756
Approved-by: Steve Beattie <steve+gitlab@nxnw.org>
Merged-by: Steve Beattie <steve+gitlab@nxnw.org>
When the variable was being expanded, it needed to be reevaluated to
check if there was still unresolved variables. That allowed for a
weird bug to happen: If the string contained a variable preceded by @,
like in "user@@{uid}" and the variable was resolved to a case where {
is used, like in @{uid}={[0-9],[1-9][0-9]}, then on the second pass,
the parser would try to resolve the following variable
@{[0-9],[1-9][0-9]}, which is incorrect behavior. Fix it by not
including part of the string that was already resolved on the
subsequent passes.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
The xtable on perms32 capable systems is being padded to the size of
the accept state tables. This was a hack to get around issue in a buggy
perms32 v1. We do not support any system using perms 32 v1 so we can
drop the hack.
Similarly since we don't support perms32v1 we don't support prompt
compat dev or perms32v1, so drop them as well
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1750
Approved-by: Ryan Lee <rlee287@yahoo.com>
Merged-by: John Johansen <john@jjmx.net>
Their is no reason for the parse to stitch 2 dfas together this way.
In the future there will be better ways to do this using unconpressed
dfas.
Dropping this also allows for some simplification, in other parts of
the code.
Drop the dead/unused code
Signed-off-by: John Johansen <john.johansen@canonical.com>
prompt_compat_permsv1 and prompt_compat_dev were used to support
prompt during early dev. We do not support any kernel using these
so drop them.
This also allows us to drop the propogation of prompt as a parameter
through several functions.
Signed-off-by: John Johansen <john.johansen@canonical.com>
The xtable on perms32 capable systems is being padded to the size of
the accept state tables. This was a hack to get around issue in a buggy
perms32 v1. We do not support any system using perms 32 v1 so we can
drop the hack.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Right now coverity is running in two steps, one to collect logs in
case of failures, and a different one to actually send the data to
coverity. The log collection step is failing because when collecting
data for python with the new version of coverity, build-log.txt is not
generated.
The whole way we build with coverity might need changing, but
currently this patch is removing the log collection so the pipeline
passes.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1754
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Right now coverity is running in two steps, one to collect logs in
case of failures, and a different one to actually send the data to
coverity. The log collection step is failing because when collecting
data for python with the new version of coverity, build-log.txt is not
generated.
The whole way we build with coverity might need changing, but
currently this patch is removing the log collection so the pipeline
passes.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
The unnamed nature of an O_TMPFILE, combined with the delayed linkage of
linkat(2), creates a potential for a filesystem mediation bypass or other
unexpected file mediation behavior. Thus, add a test to verify whether or
not such a bypass occurs.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1743
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Arch Linux qt6-webengine has `/usr/lib/qt6/QtWebEngineProcess` and
qt5-webengine has `/usr/lib/qt/libexec/QtWebEngineProcess`.
Fedora has `/usr/lib64/qt6/libexec/QtWebEngineProcess`.
openSUSE Tumbleweed has `/usr/libexec/qt5/QtWebEngineProcess` and
`/usr/libexec/qt6/QtWebEngineProcess`.
Co-authored-by: Maxime Bélair <maxime.belair@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1726
Approved-by: Maxime Bélair <maxime.belair@canonical.com>
Merged-by: John Johansen <john@jjmx.net>
I'd like to store my wg creds in my TPM module using `systemd-creds`:
```bash
PostUp = systemd-creds --name wg0 decrypt /etc/wireguard/secrets/wg0.cred | wg set wg0 private-key /dev/stdin
```
Currently I use `local/wg-quick` as work-around.
The `Ux` permission is may be a little too open, but 2 problems remain:
- the profile maintainer can't know which creds file need to be accessible
- different TMP module implementations / drivers may require different permissions
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1644
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
This MR removes some footguns in aa-notify
- Prevents the modification of special profiles
- Improve the clarity of messages
- Add support for regexes in userns_special_profiles
- Refactor get_event_type.
- Add support for regexes for special profiles
- Optimize aa-notify performances
- Minor bugfixes
Signed-off-by: Maxime Bélair <maxime.belair@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1732
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: Maxime Bélair <maxime.belair@canonical.com>
import tkinter does not automatically import tkinter.font so calls to
the latter fail if the execution environment does not already contains
it.
Signed-off-by: Maxime Bélair <maxime.belair@canonical.com>
Profiles are now updated only at initialization and when aa-notify
itself updates a profile.
A future MR will come to read profiles individually only when an event
for this profile comes to reduce overhead, as more and more profiles are
created.
Signed-off-by: Maxime Bélair <maxime.belair@canonical.com>
Mesa now needs ~/.cache/mesa_shader_cache_db/marker .
Chromium wants uid_map readable, /proc/$PID/smaps_rollup,
/sys/.../report_descriptor, and two XDG utilities used by the "Create
shortcut..." feature. Deny the latter for now, due to additional
permissions that would be needed and a questionable security trade-off
as a result.
Firefox wants a socket for its crash helper, product_{name,sku} from
DMI devices, and .sql files in its cache directory. It also wants
uevent from devices more broadly than currently allowed.
After an upgrade to libfuse 3.17.1-rc0, autopkgtests started to fail
due to a missing x permission for /usr/bin/mount. After looking at the
source code for fusermount, I noticed that it does call /bin/mount and
/bin/umount in certain cases. These uses were already there in
previous versions of libfuse but I'm still not sure why it hasn't
triggered before.
To reproduce it:
```
sudo autopkgtest-buildvm-ubuntu-cloud -v -r questing
autopkgtest archivemount -U --apt-pocket=proposed=src:fuse3 --shell-fail -- qemu autopkgtest-questing-amd64.img
```
After the test fails, enter the vm by
```
ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 10022 ubuntu@localhost
```
You can reproduce the test by running
```
cd /tmp/autopkgtest.*/build.*/src/
/tmp/autopkgtest.*/build.*/src/debian/tests/test
```
Note that ix for mount and umount were enough to make the autopkgtest
failures to start passing, but there could be issues in the future
regarding the use of fs specific mount binaries like
/usr/sbin/mount.fuse
Fixes: http://bugs.launchpad.net/bugs/2111845
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1716
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
When variable expansion occurs, the expansion attempts to replace the
memory location of the string containing the variable, and frees the
string it is replacing. However, this occurs before the variable lookup
occurs to determine if there is an appropriate declaration for the
variable. When the failing expansion occurs in a profile name, this
causes a read-after-free (followed by a double free) because the error
handling path attempts to report the profile name in the error message.
This can be reproduced like so, using the
tst/simple_tests/vars/vars_profile_name_23.sd testcase:
```
$ ../apparmor_parser --config-file=./parser.conf -M features_files/features.all -S -I /home/sbeattie/git/apparmor/parser/tst/./simple_tests/ ./simple_tests/vars/vars_profile_name_23.sd
Failed to find declaration for: @{FOO}
ERROR expanding variables for profile #xQV, failed to load
free(): double free detected in tcache 2
```
Fix this by waiting to free the profile name field until after the
variable declaration has successfully been looked up. This results in
the test case reporting the following error:
```
$ ../apparmor_parser --config-file=./parser.conf -M features_files/features.all -S -I /home/sbeattie/git/apparmor/parser/tst/./simple_tests/ ./simple_tests/vars/vars_profile_name_23.sd
Failed to find declaration for: @{FOO}
ERROR expanding variables for profile /does/not/exist@{FOO}, failed to load
```
Signed-off-by: Steve Beattie <steve@nxnw.org>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1747
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: Georgia Garcia <georgia.garcia@canonical.com>
When variable expansion occurs, the expansion attempts to replace the
memory location of the string containing the variable, and frees the
string it is replacing. However, this occurs before the variable lookup
occurs to determine if there is an appropriate declaration for the
variable. When the failing expansion occurs in a profile name, this
causes a read-after-free (followed by a double free) because the error
handling path attempts to report the profile name in the error message.
This can be reproduced like so, using the
tst/simple_tests/vars/vars_profile_name_23.sd testcase:
```
$ ../apparmor_parser --config-file=./parser.conf -M features_files/features.all -S -I /home/sbeattie/git/apparmor/parser/tst/./simple_tests/ ./simple_tests/vars/vars_profile_name_23.sd
Failed to find declaration for: @{FOO}
ERROR expanding variables for profile #xQV, failed to load
free(): double free detected in tcache 2
```
Fix this by waiting to free the profile name field until after the
variable declaration has successfully been looked up. This results in
the test case reporting the following error:
```
$ ../apparmor_parser --config-file=./parser.conf -M features_files/features.all -S -I /home/sbeattie/git/apparmor/parser/tst/./simple_tests/ ./simple_tests/vars/vars_profile_name_23.sd
Failed to find declaration for: @{FOO}
ERROR expanding variables for profile /does/not/exist@{FOO}, failed to load
```
Fixes: dfbd2dc4b ("parser: refactor variables and symbols table into their own class")
Signed-off-by: Steve Beattie <steve@nxnw.org>
Ref: https://gitlab.com/apparmor/apparmor/-/merge_requests/1747
The unnamed nature of an O_TMPFILE, combined with the delayed linkage of
linkat(2), creates a potential for a filesystem mediation bypass. Thus,
add a test to verify whether or not such a bypass occurs.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
The current lsblk profile contains `@{sys}/devices/pci@{int}:@{int}/** r` (where `@{int}` expands to `[0-9]+`). PCI BDFs are in hex, so block device paths whose BDF contains [a-f] digits are skipped, causing them to be omitted from the output of lsblk.
Replacing `@{int}` with `@{hex}` (which expands to `[0-9a-fA-F]+`) ensures PCI block device paths with [a-f] hex digits are correctly matched and displayed in the output of `lsblk`.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1725
Approved-by: Maxime Bélair <maxime.belair@canonical.com>
Merged-by: John Johansen <john@jjmx.net>
Hi,
This fixes the following error when a block device's PCI bus starts with
a non-decimal hex character and `lsblk /dev/nvme2n1` is executed:
```
audit: type=1400 audit(1751394406.516:554): apparmor="DENIED" operation="open" class="file" profile="lsblk" name="/sys/devices/pci0000:a0/0000:a0:01.1/0000:a1:00.0/nvme/nvme2/nvme2n1/" pid=164652 comm="lsblk" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
```
I used hex4 and hex2 as it matches the example from
https://docs.kernel.org/PCI/sysfs-pci.html and also because lspci(8)
says:
> domains are numbered from 0 to ffff
>
> bus (0 to ff)
Bug: https://bugs.launchpad.net/ubuntu/+source/apparmor/+bug/2111604
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1729
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: John Johansen <john@jjmx.net>
Arch Linux qt6-webengine has `/usr/lib/qt6/QtWebEngineProcess` and
qt5-webengine has `/usr/lib/qt/libexec/QtWebEngineProcess`.
Fedora has `/usr/lib64/qt6/libexec/QtWebEngineProcess`.
openSUSE Tumbleweed has `/usr/libexec/qt5/QtWebEngineProcess` and
`/usr/libexec/qt6/QtWebEngineProcess`.
Co-authored-by: Maxime Bélair <maxime.belair@canonical.com>
Fix issues introduced in coverity's snapshot 89167
- CID 532797: (#1 of 1): Use of auto that causes a copy (AUTO_CAUSES_COPY)
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
MR !1735 mistakenly assumed that x.is_covered(y) means "x is covered by
y" when the opposite is true
Fix the logic of is_covered and associated tests.
Signed-off-by: Maxime Bélair <maxime.belair@canonical.com>
- `is_covered` was not checking priorities when checking if a rule is
covered. With this fix, a rule of lower priority can no longer cover a
higher priority one.
- Fixes `is_equal(strict=False)` so that priority=0 matches implicit
priority (as it is defaulted to zero)
Signed-off-by: Maxime Bélair <maxime.belair@canonical.com>
Copy the optimized version from common.py to easyprof.py (shouldn't
change the behaviour).
Since get_directory_contents() is only used in easyprof.py, delete the
unused copy from common.py.
... and change all *TestParseInvalid classes to use it, instead of
having (nearly) the same function in every test-*.py.
Also move tests not matching the rule regex into tests array (which now supports this case).
While at it, enable the tests for abi and include rules.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1728
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: Christian Boltz <apparmor@cboltz.de>
This fixes the following error when a block device's PCI bus starts with
a non-decimal hex character and `lsblk /dev/nvme2n1` is executed:
```
audit: type=1400 audit(1751394406.516:554): apparmor="DENIED" operation="open" class="file" profile="lsblk" name="/sys/devices/pci0000:a0/0000:a0:01.1/0000:a1:00.0/nvme/nvme2/nvme2n1/" pid=164652 comm="lsblk" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
```
I used hex4 and hex2 as it matches the example from
https://docs.kernel.org/PCI/sysfs-pci.html and also because lspci(8)
says:
> domains are numbered from 0 to ffff
>
> bus (0 to ff)
Bug: https://bugs.launchpad.net/ubuntu/+source/apparmor/+bug/2111604
Signed-off-by: Louis Sautier <sautier.louis@gmail.com>
... and change all *TestParseInvalid classes to use it, instead of
having (nearly) the same function in every test-*.py.
While at it, enable the tests for abi and include rules.
While symtab for now has only static members, it will allow for a
change in the future for each profile to have their own symbols like
profile_name, etc.
According to commit cce5bd6e95, the
apparmor_parser does not collapse consecutive / characters in the
beginning of paths, since it indicates posix namespaces. Add a
equality test to make sure we maintain this behavior.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
In order to test the profile, I did the following inside an oracular VM:
- `curl https://ubuntu.com/ -o /tmp/ubuntu`
- `curl 'https://ubuntu.com/security/{CVE-2024-12797,CVE-2025-24032}' -o '#1'`
- `curl -u dlpuser:rNrKYTX9g7z3RgJRmxWuGHbeu ftp://ftp.dlptest.com/`
Finally, I ran the package's testsuite:
```
apt source curl
cd curl-8.9.1
./configure --without-ssl # SSL has been tested using the above
make
cd test/server
make
cd ..
./runtests.pl -c $(which curl)
```
The only test which should fail should be the last one, since the build was configured with support for less protocols than the ones provided by the binary we're using (this is expected and happens regardless of whether the profile is loaded or not).
A spread smoke-test is also provided as part of this MR.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1560
Approved-by: Ryan Lee <rlee287@yahoo.com>
Merged-by: Maxime Bélair <maxime.belair@canonical.com>
These profiles don't have an attachment so the path needs to be hardcoded
Fixes: 6e9ff1fa6 ("profiles: update the rest of the profiles to use @{exec_path}")
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
In the past, this class and function were used by test-signal_parse.py -
which was deleted in April 2016 (5f58d7f124139784b9ba70ce37cc26716bbc4e0f).
Maybe there were also other users, but none of them survived.
Hello!
I run AppArmor daily on my personal machine and use `aa-notify` to receive alerts for any audit events. I wanted to submit two features and one bugfix for problems that I've seen while running `aa-notify`.
### Here are the two features in this merge request:
1. Allow `aa-notify` to run in the foreground.
I understand that `aa-notify` is ment to be run as a background notification daemon, however there are situations when running in the foreground would be better suited. One example is any startup "launcher" that creates and monitors it's child processes (my setup basically does this) and when `aa-notify` forks, the launcher percieves it as crashing on startup.
This merge request adds an option "-F"/"--foreground" to prevent background forking and perserves the default behavior, while allowing `aa-notify` to run like a standard foreground application. The test cases in `utils/test/test-aa-notify.py` are also updated to reflect the argument changes.
2. Prevent `aa-notify` from exiting with a fatal error when the AppArmor profiles directory cannot be read.
During startup, `aa-notify` will attempt to read the AppArmor profiles from the profile directory using the `aa.read_profiles` function. If this function fails due to a permissions check, `aa-notify` will exit with an error. In my setups, the standard user does not have any read access to the AppArmor profiles directory (reasoning: as an attacker, I could read the profiles to find something that would have the weakest permissions for explitation, but with that route blocked, this becomes significantly harder). In this merge request, an optional paramater `skip_perm_error` that is by-default False, is added to the `read_profiles` function call in `aa-notify`. In `aa.py`, this function has two added lines, which are under `except (OSError, TypeError):`. The extra code checks if `skip_perm_error` is True, and if so will print a warning out using the `aaui.UI_Info` function and returns cleanly. During my test cases, I have not run into any issues running `aa-notify` without reading any profiles.
### BugFixes
1. Crash during `aa-notify` polling during audit events that cause `rl.parse_record(event)` to return None
I've noticed certain events will cause `aa-notify` to crash, specifically the ones in the attached log snipped will cause `ev` to be `None`.
In this merge request, I've added a simple `if ev is None:` check before attempting to read from `ev`. If `ev` is None, it will fall into `continue` and prevent a crash from occuring. The crash log is also attached for additional information.
Please let me know if there's any additional questions or information you may need! And thank you for all your hard work on this project!
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1706
Approved-by: Maxime Bélair <maxime.belair@canonical.com>
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: Christian Boltz <apparmor@cboltz.de>
After an upgrade to libfuse 3.17.1-rc0, autopkgtests started to fail
due to a missing x permission for /usr/bin/mount. After looking at the
source code for fusermount, I noticed that it does call /bin/mount and
/bin/umount in certain cases. These uses were already there in
previous versions of libfuse but I'm still not sure why it hasn't
triggered before.
To reproduce it:
sudo autopkgtest-buildvm-ubuntu-cloud -v -r questing
autopkgtest archivemount -U --apt-pocket=proposed=src:fuse3 --shell-fail -- qemu autopkgtest-questing-amd64.img
After the test fails, enter the vm by
ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 10022 ubuntu@localhost
You can reproduce the test by running
cd /tmp/autopkgtest.*/build.*/src/
/tmp/autopkgtest.*/build.*/src/debian/tests/test
Note that ix for mount and umount were enough to make the autopkgtest
failures to start passing, but there could be issues in the future
regarding the use of fs specific mount binaries like
/usr/sbin/mount.fuse
Fixes: http://bugs.launchpad.net/bugs/2111845
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
@jjohansen had mentioned to me when he suggested this profile that there was smth he noticed about john that gave him the impression it was a good candidate for confinement. I think that would be the only thing I'd want to call out - wondering whether something like this captures that spirit or if there's something else worth including.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1662
Approved-by: Maxime Bélair <maxime.belair@canonical.com>
Merged-by: Maxime Bélair <maxime.belair@canonical.com>
This is a small improvement that makes sure lsusb is able to read some
properties of the virtual USB devices provisioned for the test.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
Parsing mount options (also) accepted partial matches as long as the
option started with the right characters. For example, 'options=syncfoo'
was parsed as 'sync'. This is also the reason why the list of mount
options was re-ordered so that 'r' and 'w' came last to give longer
options a chance to match (otherwise, 'rw' would be interpreted as 'r').
Fix parsing by adding a lookahead match so that the regex enforces that
the mount option is followed by whitespace, or is at the end of
rule_details.
Note that this issue only affected the options=foo syntax.
options=(foo) worked correctly even without this fix.
Now that this is fixed, move 'r' and 'w' back to their original position
in the list of mount options.
Also add a test where a mount rule ends with 'options=rw,' to ensure
that the '$' lookahead works.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1712
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: Georgia Garcia <georgia.garcia@canonical.com>
Parsing mount options (also) accepted partial matches as long as the
option started with the right characters. For example, 'options=syncfoo'
was parsed as 'sync'. This is also the reason why the list of mount
options was re-ordered so that 'r' and 'w' came last to give longer
options a chance to match (otherwise, 'rw' would be interpreted as 'r').
Fix parsing by adding a lookahead match so that the regex enforces that
the mount option is followed by whitespace, or is at the end of
rule_details.
Note that this issue only affected the options=foo syntax.
options=(foo) worked correctly even without this fix.
Now that this is fixed, move 'r' and 'w' back to their original position
in the list of mount options.
Also add a test where a mount rule ends with 'options=rw,' to ensure
that the '$' lookahead works.
Parsing `mount options=x` results in "Passed unknown options keyword to
MountRule: x", while parsing `mount options=xy` results in "Can't parse mount rule".
This difference happens because the code checks (besides the list of
known options) for a regex `([A-Za-z0-9])` which only matched a
single-character unknown option.
Change that regex to also match multiple characters, and also allow to
match `-` (used in some known mount options, so it's likely that it also
gets used in so far unknown mount options)
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1710
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: Georgia Garcia <georgia.garcia@canonical.com>
The whole pattern already has `(...)*`, therefore there's no need to
make option_pattern optional.
Before this change, mount_condition_pattern could have matched
- on empty strings (it still can, thanks to the trailing `*` which can
also mean "zero matches") or
- whitespace-only strings (which is covered by the two regexes using
mount_condition_pattern - they both have `\s*` and/or `\s+` around it)
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1709
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: Christian Boltz <apparmor@cboltz.de>
Parsing `mount options=x` results in "Passed unknown options keyword to
MountRule: x", while parsing `mount options=xy` results in "Can't parse mount rule".
This difference happens because the code checks (besides the list of
known options) for a regex `([A-Za-z0-9])` which only matched a
single-character unknown option.
Change that regex to also match multiple characters, and also allow to
match `-` (used in some known mount options, so it's likely that it also
gets used in so far unknown mount options)
The whole pattern already has `(...)*`, therefore there's no need to
make option_pattern optional.
Before this change, mount_condition_pattern could have matched
- on empty strings (it still can, thanks to the trailing `*` which can
also mean "zero matches") or
- whitespace-only strings (which is covered by the two regexes using
mount_condition_pattern - they both have `\s*` and/or `\s+` around it)
Otherwise tst_regex would log as being from parser_common.c instead of
being from the actual source of parser_regex.c
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
The hwctl profile is being carried upstream, so we can keep it in
sync, but is being packaged from the regular profile set so that it
can be part of a package that is SRUed (ubuntu stable release update)
separate from the rest of apparmor, and its profiles.
Provide backwards compat with older parser to reduce the amount of
distro patching that is needed.
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1705
Approved-by: Maxime Bélair <maxime.belair@canonical.com>
Merged-by: John Johansen <john@jjmx.net>
The hwctl profile is being carried upstream, so we can keep it in
sync, but is being packaged from the regular profile set so that it
can be part of a package that is SRUed (ubuntu stable release update)
separate from the rest of apparmor, and its profiles.
Provide backwards compat with older parser to reduce the amount of
distro patching that is needed.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Many profile MRs created with aa-logprof come with abstractions
unrelated to the confined application. This MR allow to restrict
proposed abstractions to related profiles.
Improve #LOGPROF-SUGGEST metadata to support a set of space-separated
regexes. If this tag is present, the abstraction is only proposed to
aa-logprof if one of the regexes is matched.
If this abstraction should not be proposed to any profile, it is
possible to tell #LOGPROF-SUGGEST: no
Signed-off-by: Maxime Bélair <maxime.belair@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1696
Approved-by: Christian Boltz <apparmor@cboltz.de>
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: Christian Boltz <apparmor@cboltz.de>
Improve #LOGPROF-SUGGEST metadata to support a set of space-separated
regexes. If this tag is present, the abstraction is only proposed to
aa-logprof if one of the regexes is matched.
If this abstraction should not be proposed to any profile, it is
possible to tell #LOGPROF-SUGGEST: no
Signed-off-by: Maxime Bélair <maxime.belair@canonical.com>
Introduce aa-show-usage, a new helper allowing to determine which
profiles on the system are used and which are not. A profile is marked as
used when at least one file installed in the machine matches the attach point
specified in the profile.
This tool supports filtering options, allowing users to, for example,
display only unconfined profiles that are currently in use. This can
notably help sysadmins to evaluate the security of their systems.
Signed-off-by: Maxime Bélair <maxime.belair@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1612
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: Christian Boltz <apparmor@cboltz.de>
The new option --show-matching-path shows a path that matches in the host
filesystem, to prove that the profile is indeed used.
Also, profiles' xattrs are now parsed into a dict and are taken in
consideration when looking for matching profiles.
Signed-off-by: Maxime Bélair <maxime.belair@canonical.com>
Many test provide their own implementation of cmd(). This commit makes
all of them rely on common.py implementation of cmd()
Signed-off-by: Maxime Bélair <maxime.belair@canonical.com>
Introduce aa-show-usage, a new helper allowing to determine which
profiles on the system are used and which are not. A profile is marked as
used when at least one file installed in the machine matches the attach point
specified in the profile.
This tool supports filtering options, allowing users to, for example,
display only unconfined profiles that are currently in use. This can
notably help sysadmins to evaluate the security of their systems.
Signed-off-by: Maxime Bélair <maxime.belair@canonical.com>
The recent change to make CI pipeline build test images on a manual
trigger masks the outcome of the pipeline. Let's use the new inputs [1]
feature to allow manually triggering the pipeline with an explicitly
built image instead.
[1] https://docs.gitlab.com/ci/inputs/
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
The tools don't support having multiple options specified in mount
rules as it is allowed in the parser.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Having a `__pycache__` on check can result in all kinds of weird issues.
Notaby, the test environment is currently clearing all environment variables,
including those responsible for keeping a reproducible build.
This is not immediately a problem for functionality,
but complicates downstream distribution in systems such as nix, where it is considered a bug [1].
It might also be possible to force determinism by exporting env vars instead:
```
DETERMINISTIC_BUILD=1
PYTHONHASHSEED=0
```
This forces a special mode on the pycache, where instead of a `moddate`,
it will then store a hash of the outputs [2].
This would be an alternative fix, but considering apparmor upstream does
not (yet) test for bit-reproducibility, it is likely too fragile here.
[1] https://github.com/NixOS/nixpkgs/issues/409032
[2] https://peps.python.org/pep-0552/
I understand AppArmor might or might not care about deterministic builds.
I was writing this patch for nixpkgs anyways, so I might as well try to
contribute it - whether it gets merged or not.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1697
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: Christian Boltz <apparmor@cboltz.de>
Having a __pycache__ on check can result in all kinds of weird issues.
Notaby, the test environment is currently clearing all environment variables,
including those responsible for keeping a reproducible build.
This is not immediately a problem for functionality,
but complicates downstream distribution in systems such as nix, where it is considered a bug [1].
It might also be possible to force determinism by exporting env vars instead:
```
DETERMINISTIC_BUILD=1
PYTHONHASHSEED=0
```
This forces a special mode on the pycache, where instead of a `moddate`,
it will then store a hash of the outputs [2].
This would be an alternative fix, but considering apparmor upstream does
not (yet) test for bit-reproducibility, it is likely too fragile here.
[1] https://github.com/NixOS/nixpkgs/issues/409032
[2] https://peps.python.org/pep-0552/
The current logic will only build spread images, for master (which uses
protected cache), when the .image-garden.mk or .gitlab-ci.yml files
change as compared to master. This is great IF they change and WHEN the
cache is hot but right now it seems that this is not the case and master
just has no protected cache.
Add a manual knob to run the one-off cache job whenever we want to.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1694
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: Georgia Garcia <georgia.garcia@canonical.com>
We rely on a hack that avoids compressing and pushing the cache if it
has not really changed but it's worth adding links.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
The current logic will only build spread images, for master (which uses
protected cache), when the .image-garden.mk or .gitlab-ci.yml files
change as compared to master. This is great IF they change and WHEN the
cache is hot but right now it seems that this is not the case and master
just has no protected cache.
Add a manual knob to run the one-off cache job whenever we want to.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
This allows having a locally-built apparmor tree while using spread to
test against other distributions.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
This relies on a documented hack that makes GitLab cache machinery
skip the upload if all of the cached files are missing in the tree.
This saves about a minute per pull request CI/CD run times the number of
images required for testing.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
This fixes the long standing issue affecting caching of the image
between the image-* jobs and the spread-* jobs.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
This way they can be automatically cancelled by GitLab when a new commit is pushed
to a merge request, this providing feedback to the tip of the branch or pull request
more rapidly.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
profiles make check was showing an error because
profiles/extras/abstractions didn't exist, so only include tests for
it if it exists. This commit also deduplicates the abstractions test.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Following the Security Technical Implementation Guide, it is better to
set the permissions to 0000 for the shadow file.
However, since PAM version 1.6.0, after this change [0], unix-chkpwd
will unconditionnaly read the shadow file. And with the previous
restriction, the binary has an access denied to the shadow which
blocks user authentications. Moreover the PAM changes is needed to fix
the CVE-2024-10041.
Giving the read caability to the unix-chkpwd profile allows it to
function properly. See bug report [1].
[0] - https://github.com/linux-pam/linux-pam/pull/686
[1] - https://bugzilla.suse.com/show_bug.cgi?id=1241678
Signed-off-by: vlefebvre <valentin.lefebvre@suse.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1685
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
This is a set of small tweaks to the merged rule interface window
- don't specify, font or size when setting bold
- improve message around unknown profiles
- add a custom message for snap profile
- output tktheme missing message, to help users identify they can improve the interface when started manually
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1529
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Snap policy is a special case of the unknown profile. Give the user
a slightly better message for these messages.
Signed-off-by: John Johansen <john.johansen@canonical.com>
The current notification can be confusing, in that it can present a
profile followed by a list of rules that can't be selected.
Explictly state that the Unknown profile can't be modified so the user
has some indication that not being able to select the shown rules is
expected.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Instead of specifying the font type and size, which will not work for
all display configuration, use the the default BOLD font that tkinter
supplies.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Following the Security Technical Implementation Guide, it is better to
set the permissions to 0000 for the shadow file.
However, since PAM version 1.6.0, after this change [0], unix-chkpwd
will unconditionnaly read the shadow file. And with the previous
restriction, the binary has an access denied to the shadow which
blocks user authentications. Moreover the PAM changes is needed to fix
the CVE-2024-10041.
Giving the read caability to the unix-chkpwd profile allows it to
function properly. See bug report [1].
[0] - https://github.com/linux-pam/linux-pam/pull/686
[1] - https://bugzilla.suse.com/show_bug.cgi?id=1241678
Signed-off-by: vlefebvre <valentin.lefebvre@suse.com>
Creates an AA profile for ProFTPD. The profile has been tested on Oracular with version `1.3.8.b+dfsg-2ubuntu1`, using the source integration/unit tests and via FTP commands. As an FTP package any directory can be used for manipulating files. I've included read/write permissions to several usual locations located at the end of the profile. However these are too loose, any suggestions for how they could be tightened is much appreciated. Thanks!
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1524
Approved-by: Maxime Bélair <maxime.belair@canonical.com>
Merged-by: Maxime Bélair <maxime.belair@canonical.com>
The current Transmission related profiles are set to complain mode. I've tested on Oracular `transmission-daemon` and `transmission` with the profile enforced with no denials have occurred. This MR removes the complain flag on these profiles.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1534
Approved-by: John Johansen <john@jjmx.net>
Merged-by: Maxime Bélair <maxime.belair@canonical.com>
For now, also use a complain mode flag like with Xorg. However, it may be
possible for complain mode to be dropped from both in the future,
tightening confinement (especially since Xorg.wrap is setuid). A
complain-mode profile can still be useful for Xorg.wrap by giving it a
separate label.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1665
Approved-by: Maxime Bélair <maxime.belair@canonical.com>
Merged-by: Ryan Lee <rlee287@yahoo.com>
For now, also use a complain mode flag like with Xorg. However, it may be
possible for complain mode to be dropped from both in the future,
tightening confinement (especially since Xorg.wrap is setuid). A
complain-mode profile can still be useful for Xorg.wrap by giving it a
separate label.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Add AA profile for ghostscript. This profile has been tested on the latest plucky gs version 10.05.0dfsg1-0ubuntu1 while the latest upstream version is 10.05.0. This profile limits file access (read and write) to specific file extensions, printer devices in /dev and directories in /tmp.
The profile has been tested against the regression test suite we use in Ubuntu and manually. Testing against devices has been performed in a limited fashion as I only have access to one usb printer.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1590
Approved-by: Ryan Lee <rlee287@yahoo.com>
Merged-by: Maxime Bélair <maxime.belair@canonical.com>
Add AA profile for `nslookup`. This profile has been tested on the latest plucky `nslookup` version `9.20.4-3ubuntu1` (ultimately part of `dnsutils`). Functionality has been exercised as much as possible, including basic record lookups, querying specific DNS servers, performing reverse DNS lookups, querying a CNAME, querying an MX record, querying a txt record, querying a DNSSEC-related record, performing IPv4 & IPv6 lookups, and overriding to use a custom resolver. These tests were performed through command parsing and the interactive terminal mode. AFAIK, upstream does not have a test suite available for `nslookup`
Signed-off-by: john-breton <john.breton@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1619
Approved-by: Ryan Lee <rlee287@yahoo.com>
Approved-by: Maxime Bélair <maxime.belair@canonical.com>
Merged-by: Maxime Bélair <maxime.belair@canonical.com>
Add AA profile for /usr/bin/locale. This profile has been tested on the latest plucky version of locale (Ubuntu GLIBC 2.41-6-ubuntu1). This profile prevents write access to any file, limits read access to all files necessary for locale to work and limits execution of any other file other than the compressors (gzip/bzip2), which are also limited by a specific subprofile..
The profile has been tested manually.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1646
Approved-by: Ryan Lee <rlee287@yahoo.com>
Merged-by: Maxime Bélair <maxime.belair@canonical.com>
Follow up to MR !1637
`make check-parser` in profiles now verifies that all profiles allow at
least a read access to their attachment path.
This is done with test_profile.py, more robust and therefore replacing
test_profile.sh.
Additionally, fix the permission of 3 profiles, that were not detected by
!1637 due to a bug in a regex
Signed-off-by: Maxime Bélair <maxime.belair@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1657
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: John Johansen <john@jjmx.net>
`make check-parser` in profiles now verifies that all profiles allow at
least a read access to their attachment path.
Signed-off-by: Maxime Bélair <maxime.belair@canonical.com>
test_profile.sh contained some bash-specific code and a bug in a regex
that failed to flag some profiles where read access to their attachment
path was not allowed.
Replace it with a Python script, more robust and maintenable.
Signed-off-by: Maxime Bélair <maxime.belair@canonical.com>
Have the parser extract the attachment path from the profile declaration
and make it available as a local variable within the profile. This allows
profile rules to use the executable attachment path in rules.
eg.
```
profile ex /bin/** {
@{attach_path} r,
# ...
}
profile /path/to/bin {
@{attach_path} r,
# ...
}
```
if a profile does not define an attachment like
```
profile noattach {
@{attach_path} r,
}
```
the apparmor_parser will fail the compile with the error.
```
Found reference to variable attach_path, but is never declared
```
While not recommended for rules directly in a profile the above
the undeclared variable error can be avoided in in abstractions
by wrapping the variable in a conditional.
```
if defined @{attach_path} {
@{attach_path r,
}
```
The attachment xattr/label conditionals are not made available at
this time as regular file path rules can not use them.
Similarly a @{exec_path} variable is made available. It is different
than @{attach_path} in that it is intended to be a kernel variable
that represents the specific executable that was matched at run
time. However to support policy on kernels that don't define the
kernel variable it has a fallback value that is the same as
@{attach_path}.
This patch is a follow on to MR:1637 (https://gitlab.com/apparmor/apparmor/-/me\
rge_requests/1637)
and is similar to how the apparmor.d project uses the manually setup
@{exec_path} variable.
We can bike shed over the variable name. @{attach_path} was chosen
here because this is the attachment conditional path for the
executable, not the executable's actual path. While @{exec_path} is
intended to be the applications actual executable path.
support the @{exec_path} kernel variable (all of them atm).
Notes:
The minimize.sh tests are changed because this patch causes path based
profile names to create an attachment. This could be done by doing the
attach_variable expansion in the alternate location marked by the
patch, but since the kernel is going to start doing this for all
profiles that don't have an attachment it is better for the parser to
do it, as it can optimize better.
This patch series may cause breakage if policy declares either
@{attach_path} or @{exec_path} by shadowing those previously declared
variables in the profile block. The previously declared variable
is available in the attachment specification so uses like the
apparmor.d project won't break as it with transfer its variable
value to the attachment which will the transfer that value into
the automatic local var.
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1643
Approved-by: Maxime Bélair <maxime.belair@canonical.com>
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
See the comment for an explanation of why CAP_SYS_ADMIN was being checked and why it isn't actually necessary for setting ionice values for processes
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Make it so the @{exec_path} and @{attach_path} variables behavior
completely as local variables, overriding global variables of the
same name, instead of conflicting with them.
The exec var is only validate for the profile block after the attachment
is defined so the pattern
@{exec_path}=/path
profile test @{exec_path} {
@{exec_path} rw,
}
is valid with the global var defining the attachent which then sets
the local auto @{exec_path} and @{attach_path} variables.
Signed-off-by: John Johansen <john.johansen@canonical.com>
- the autovars not being defined because the profile doesn't have an
attachment
- the autovar conflicting with a user defined var of the same name
Signed-off-by: John Johansen <john.johansen@canonical.com>
This patch updates the set of profiles updated by MR:1637, this is split
off from the rest of the profile updates because that set is explicity
recently set apart.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Have the parser extract the attachment path from the profile declaration
and make it available as a variable within the profile. This allows
profile rules to use the executable attachment path in rules.
eg.
```
profile ex /bin/** {
@{attach_path} r,
# ...
}
profile /path/to/bin {
@{attach_path} r,
# ...
}
```
if a profile does not define an attachment like
```
profile noattach {
@{attach_path} r,
}
```
the apparmor_parser will fail the compile with the error.
```
Found reference to variable attach_path, but is never declared
```
The attachment xattr/label conditionals are not made available at
this time as regular file path rules can not use them.
Similarly a @{exec_path} variable is made available. It is different
than @{attach_path} in that it is intended to be a kernel variable
that represents the specific executable that was matched at run
time. However to support policy on kernels that don't define the
kernel variable it has a fallback value that is the same as
@{attach_path}.
This patch is a follow on to MR:1637 (https://gitlab.com/apparmor/apparmor/-/merge_requests/1637)
and is similar to how the apparmor.d project uses the manually setup
@{exec_path} variable.
We can bike shed over the variable name. @{attach_path} was chosen
here because this is the attachment conditional path for the
executable, not the executable's actual path. While @{exec_path} is
intended to be the applications actual executable path.
support the @{exec_path} kernel variable (all of them atm).
Notes:
The minimize.sh tests are changed because this patch causes path based
profile names to create an attachment. This could be done by doing the
attach_variable expansion in the alternate location marked by the
patch, but since the kernel is going to start doing this for all
profiles that don't have an attachment it is better for the parser to
do it, as it can optimize better.
This patch may cause breakage if policy declares either @{attach_path}
or @{exec_path} this will not be dealt with here, but in a subsequent
patch that allows variables to have a local scope so that the compiler
defined vars will just get declared locally.
Signed-off-by: John Johansen <john.johansen@canonical.com>
This includes testing for options in (list) by itself, along with a rudimentary test for the combination of options=(list) and options in (list).
In particular, the test for the combination confirms that the `apparmor.d` man page was wrong about what happens when these options are combined.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1672
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
... and drop rules that are part of abstractions/gtk
Note that abstractions/gtk contains more than the rules dropped here,
which means it effectively extends the permissions granted by
abstractions/gnome.
Idea by darix.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1678
Approved-by: Ryan Lee <rlee287@yahoo.com>
Merged-by: John Johansen <john@jjmx.net>
- iotop-c fails with permission errors in nl_init without network netlink
raw.
- iotop-c also needs access to the iotop config directory instead of just
the iotoprc file within.
- iotop-c uses CAP_SYS_NICE to set ionice values. For some reason, no
audit log is generated without the capability present, but include it
anyways in case this allowance is due to a parser or kernel bug that
needs to be squashed later.
Fixes: https://bugs.launchpad.net/bugs/2107727
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1675
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Remove virtual from non-base class fns, as this can hide/make it hard to discover some bugs.
Add override to virtual fns that should be overriding, which helps catch certain class of bugs at compile time
fix(non-virtual-dtor): add missed virtual destructor
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1669
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
disconnected_mount_complain only contains xpass tests, which should
not be included in the spread XFAIL tests.
Fixes: 1aca4a1d ("tests: regression: mark disconnected-complain-mode tests as xpass")
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
- iotop-c fails with permission errors in nl_init without network netlink
raw.
- iotop-c also needs access to the iotop config directory instead of just
the iotoprc file within.
- iotop-c uses CAP_SYS_NICE to set ionice values. For some reason, no
audit log is generated without the capability present, but include it
anyways in case this allowance is due to a parser or kernel bug that
needs to be squashed later.
Fixes: https://bugs.launchpad.net/bugs/2107727
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
The internal permission accumulation is currently broken in that
the ordering of rules matter to whether deny is clearing accumulated
perms.
If a deny node comes before an allow node the deny bits will get set
but the following allow bits won't get cleared by the deny node.
This isn't currently an actual issue for mediation as the deny
bit will be applied at one of
1. apply_and_clear_deny
2. permission remapping
3. run time mediation
but it does result in the internal state having sometimes having both
allow and deny bits set, dependent on order of computation, resulting
in state machines with different sizes because minimization
partitioning is based on the internal permissions.
This means that dfa minimization may not result in a truly minimal
state machine, and even worse can cause inconsistenty and failure in
tests that rely on internal state like the equality and minimization
test, as seen in https://gitlab.com/apparmor/apparmor/-/issues/513
The failure was due to musl stl sets implementation producing a
different ordering of the nodes than glibc. So when the permissions
where accumulated the internal set of permissions were different.
Fix this by giving the different node classes their own internal priority.
This will ensure the bits are properly cleared for that priority before
accumulating.
Note: other ways of fixing.
1. Fixup internal accumulation to use accumulating perms of "higher"
priority as part of the mask (deny and allow mask prompt).
2. Do a hard masking apply at the end after all bits have been accumulated
(ie, in accept_perms after the for loop).
the priority route was chosen because it is a little smaller and
scales better if we get new Node types we have to deal with
(eg. planned complain node).
BugLink: https://gitlab.com/apparmor/apparmor/-/issues/513
Fixes: 1ebd99115 ("parser: change priority so that it accumulates based on permissions")
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1655
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
The internal permission accumulation is currently broken in that
the ordering of rules matter to whether deny is clearing accumulated
perms.
If a deny node comes before an allow node the deny bits will get set
but the following allow bits won't get cleared by the deny node.
This isn't currently an actual issue for mediation as the deny
bit will be applied at one of
1. apply_and_clear_deny
2. permission remapping
3. run time mediation
but it does result in the internal state having sometimes having both
allow and deny bits set, dependent on order of computation, resulting
in state machines with different sizes because minimization
partitioning is based on the internal permissions.
This means that dfa minimization may not result in a truly minimal
state machine, and even worse can cause inconsistenty and failure in
tests that rely on internal state like the equality and minimization
test, as seen in https://gitlab.com/apparmor/apparmor/-/issues/513
The failure was due to musl stl sets implementation producing a
different ordering of the nodes than glibc. So when the permissions
where accumulated the internal set of permissions were different.
Fix this by giving the different node classes their own internal priority.
This will ensure the bits are properly cleared for that priority before
accumulating.
Note: other ways of fixing.
1. Fixup internal accumulation to use accumulating perms of "higher"
priority as part of the mask (deny and allow mask prompt).
2. Do a hard masking apply at the end after all bits have been accumulated
(ie, in accept_perms after the for loop).
the priority route was chosen because it is a little smaller and
scales better if we get new Node types we have to deal with
(eg. planned complain node).
BugLink: https://gitlab.com/apparmor/apparmor/-/issues/513
Fixes: 1ebd99115 ("parser: change priority so that it accumulates based on permissions")
Signed-off-by: John Johansen <john.johansen@canonical.com>
Specifying norelatime should set the corresponding MS_RELATIME flag clear
bit. Instead, it ORed in MS_NORELATIME, which expands to 0. Properly set
the clear bit by using MS_RELATIME.
Fixes: c9e31b7f "Add mount rules"
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
... and drop rules that are part of abstractions/gtk
Note that abstractions/gtk contains more than the rules dropped here,
which means it effectively extends the permissions granted by
abstractions/gnome.
Idea by darix.
fuse_overlayfs requires noatime, but we should also allow more flags than
just that to preempt future breakage from flags not included in the rules.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Add basic support for the priority rules prefix. This patch does not
allow the utils to set or suggest priorities. It allows parsing and
retaining of the priority prefix if it already exists on rules and
checking if it's in the supported range.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Some classes don't support modifiers like audit and deny. Only rlimit
has been checking for the allow keyword, but the others shouldn't
support it as well. Since they all do the same check, refactor them
into a method from BaseRule in case more modifiers are added.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
The lack of a space after $testtype is a syntax error and was causing the
equality tests on Ubuntu Xenial to be silently skipped and marked PASS.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
- set filetype, instead of syntax, in vim modelines
- replace filetype of subdomain with apparmor
- move modelines in the first or last five lines of each file so that
vim can recognize them
I'm working on a Rust library project that collects hardware and OS information from the local system and queries the Ubuntu Hardware Certification service to determine if the device model has been certified.
I'd like to add an AppArmor profile to ensure the `hwctl` program has access to the resources it needs.
Project source code: https://github.com/canonical/hardware-api/
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1658
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
This is necessary for lsof run as root to be able to return results from
processes run by other users.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
lsof will attempt (reverse?) DNS queries to resolve IP addresses in open
sockets to domain names, so the full nameservice abstraction is needed.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
- common file formats that qpdf works with: .pdf, .json and .qdf
- .in and .out are also allowed in user's home directories as they
are sometimes used
- other paths are added, including mounts and system locations
Signed-off-by: Allen Huang <allen.huang@canonical.com>
We need to be able to dump the initial partition assignments, and then
the partitions after minimization but before remapping to be able to
check on what is being done by minimization.
Add these as part of -D dfa-minimize-partitions
Ideally we would rework the code so that the existing mininimization
dump could share the dump routine but, its interwined with computation
state and information is thrown away before reaching the end.
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1651
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
We need to be able to dump the initial partition assignments, and then
the partitions after minimization but before remapping to be able to
check on what is being done by minimization.
Add these as part of -D dfa-minimize-partitions
Ideally we would rework the code so that the existing mininimization
dump could share the dump routine but, its interwined with computation
state and information is thrown away before reaching the end.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Unconfined delegates access to open file descriptors. Therefore when running a confined binary from unconfined, it will work even when the attachment path is not read-allowed.
However, as soon as these confined binaries are run from another confined process, this delegation is not permitted anymore and the program breaks.
This has been the cause of several bugs such as https://bugs.launchpad.net/ubuntu/+source/apparmor/+bug/2107455 or https://github.com/canonical/snapd/pull/15181 .
This MR makes sure every confining AppArmor profiles explicitly allow (at least) read access to their attachment path.
This Merge request:
- Introduce `test_profile.sh`, a helper script that ensures confining AppArmor profiles explicitly allow (at least) read access to their attachment path.
- Modifies a lot of profiles so that all profiles have r/mr access to their attachment path
- Extends `make check` to automatically ensure all AppArmor profile grant explicit read access to their attachment path, preventing future omissions.
- Modifies apparmor_parser to show attachment in --debug output
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1637
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
This reverts commit 75959225b3.
Do not enable the verify attachment-path script as part of the CI.
1. The script itself has several bashisms, that need to be fixed before
we land it as part of the regular integration test.
2. The script is going to need to be extended to support the new
parser variables, before it can be turned on as part of the CI.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Improve the failure messages around getting policy information to
be less ambiguous about what went wrong.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Downstream report: https://github.com/NixOS/nixpkgs/issues/347490
Output of `aa-status` is nondescriptive if no profiles are loaded.
Worse yet, the json output isn't even valid json.
It would make sense to just return a json object with no entries,
instead of returning a non-json `eprint` to stderr.
**Ideally** output of non-json would be more descriptive.
Currently:
```
apparmor module is loaded.
Failed to get profiles: 2....
```
What i would prefer:
```
apparmor module is loaded.
Failed to get profiles: No policies loaded
```
However, i am unfamiliar with how the translation framework works,
and thus not confident to do this change blindly.
I am happy to add a commit doing so if i know where to change all that.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1652
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Downstream report: https://github.com/NixOS/nixpkgs/issues/347490
Output of `aa-status` is nondescriptive if no profiles are loaded.
Worse yet, the json output isn't even valid json.
It would make sense to just return a json object with no entries,
instead of returning a non-json `eprint` to stderr.
This reverts commit 27f5b623f7, reversing
changes made to ee08bfbc90.
This causes the plasmashell profile to have a conflicting x modifiers
error. This breaks CI and compile/load of the plasmashell profile.
Revert until it can be fixed. Using priority.
Signed-off-by: John Johansen <john.johansen@canonical.com>
If kanidm is configured in nsswitch.conf(5), access to the kanidm-unixd
configuration is needed for applications to resolve entries.
For example:
```
type=AVC apparmor="DENIED" operation="open" class="file" profile="php-fpm"
name="/etc/kanidm/unixd" comm="php-fpm" requested_mask="r" denied_mask="r"
```
Signed-off-by: Georg Pfuetzenreuter <mail@georg-pfuetzenreuter.net>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1638
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: John Johansen <john@jjmx.net>
There is an unfortunate long kernel dev history as to why this currently
isn't the case, so we're stuck with documenting the facts for now.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
If kanidm is configured in nsswitch.conf(5), access to the kanidm-unixd
configuration is needed for applications to resolve entries.
For example:
```
type=AVC apparmor="DENIED" operation="open" class="file" profile="php-fpm"
name="/etc/kanidm/unixd" comm="php-fpm" requested_mask="r" denied_mask="r"
```
Signed-off-by: Georg Pfuetzenreuter <mail@georg-pfuetzenreuter.net>
Extend `make check` to automatically ensure every AppArmor profile grants
explicit read access to its attachment path, preventing future omissions.
Signed-off-by: Maxime Bélair <maxime.belair@canonical.com>
Grant explicit read permission on each profile’s attachment path. This
avoid issues when running them from a confined environment and makes
test_profile.sh pass.
Signed-off-by: Maxime Bélair <maxime.belair@canonical.com>
Unconfined delegates access to open file descriptors. Therefore when
running a confined binary from unconfined, it will work even when the
attachment path is not read-allowed.
However, as soon as these confined binaries are run from another
confined process, this delegation is not permitted anymore and the
program breaks.
This has been the cause of several bugs such as
https://bugs.launchpad.net/ubuntu/+source/apparmor/+bug/2107455 or
https://github.com/canonical/snapd/pull/15181 .
Introduce `test_profile.sh`, a helper script that ensures confining
AppArmor profiles explicitly allow (at least) read access to their
attachment path.
Signed-off-by: Maxime Bélair <maxime.belair@canonical.com>
When showing the content of profiles with `apparmor_parser --debug`, the
attachment path is now displayed within the 'Debugging built structures'
section.
Signed-off-by: Maxime Bélair <maxime.belair@canonical.com>
Due to how labeling is implemented, during the creation it is not yet
defined, so we need to grant create permissions without attaching the
label yet.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
CVMFS ( the [CernVM File System](cernvm.cern.ch)) is a read-only fs used to distribute software that is widely used in scientific computing (at CERN and beyond, for example by the [EESSI project](eessi.io)).
CVMFS historically uses the mountpoint /cvmfs, but the new fusermount3 profile doesn't allow that. It's not really possibly to move the mountpoint to /mnt/cvmfs, because the software installed on CVMFS often uses the absolute path /cvmfs/... for linking.
We've added a /etc/apparmor.d/local/fusermount3 to our packages, but it'd be much appreciated if this could be fixed upstream!
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1587
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: John Johansen <john@jjmx.net>
Currently abi=<kernel> always grabs the kernels actual features but
it should respect --kernel-features=. This is causing the simple
tests to fail when abi=<kernel> is specified.
Fix it so abi=<kernel> respects the kernel abi specified in the configs
or on the command line.
Signed-off-by: John Johansen <john.johansen@canonical.com>
This enables us to exercise the front perms parse logic in the utils rule parsing through the simple tests as well
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
ipa_verify is a simple libcamera tool that does not use the portion of
libcamera that creates user namespaces. This simple profile should be
enough to replace the previous unconfined profile.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
FS based unix sockets have a complicatd interaction with socket
mediation some of the mediation happens in file hooks while other
parts happen in network hooks.
When the kernel doesn't have the unix socket mediation patches the
interactions become largely mediated through the network hooks, as
unix rules get downgraded to socket rules. However some filesystem
operations are needed, and some hooks like bind may be called
differently based on the unix socket type, and not just the address.
Without the kernel patches these variations are not taken into
account.
Changes in the parser networking permission mappings have also
affected the downgrade path, as the parser now supports permissions on
socket rules, downgrades can use permissions and be more faithful to
the original rule but this can also break tests that didn't add all
the permissions needed for the downgrade case.
update unix_socket_pathname.sh to detect whether rule downgrades are
being used, and adjust permissions and expectations based on this.
Fixes: 7ce768244 ("tests: regression: fix regression test for upstream kernels")
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1622
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Approved-by: Maxime Bélair <maxime.belair@canonical.com>
Merged-by: John Johansen <john@jjmx.net>
The tests on slower systems are occassionally timing out leading to
inconsistent pass/fail runs. The time out failure depending on which
test it occurs in can result in false passes, or failres.
Double the timeout, which hopefully will be enough to avoid the
timeout issue without making the tests wait too long.
Signed-off-by: John Johansen <john.johansen@canonical.com>
FS based unix sockets have a complicatd interaction with socket
mediation some of the mediation happens in file hooks while other
parts happen in network hooks.
When the kernel doesn't have the unix socket mediation patches the
interactions become largely mediated through the network hooks, as
unix rules get downgraded to socket rules. However some filesystem
operations are needed, and some hooks like bind may be called
differently based on the unix socket type, and not just the address.
Without the kernel patches these variations are not taken into
account.
Changes in the parser networking permission mappings have also
affected the downgrade path, as the parser now supports permissions on
socket rules, downgrades can use permissions and be more faithful to
the original rule but this can also break tests that didn't add all
the permissions needed for the downgrade case.
update unix_socket_pathname.sh to detect whether rule downgrades are
being used, and adjust permissions and expectations based on this.
Fixes: 7ce768244 ("tests: regression: fix regression test for upstream kernels")
Signed-off-by: John Johansen <john.johansen@canonical.com>
... and adjust the tools to raise an exception if such a rule is found.
While this is not nice, it's better than the previous behaviour where
only the last 'options' was kept, and the others were lost when writing
the rule.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1617
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
The attach_disconnected.sh and deleted.sh tests added expanded their
testing by using unix sockets. This however ever needs support of
unix socket mediation.
Provide a minimal fix by setting bailouts for the the tests if the
requirement is not present. Long term it would be better if the
expected/needed permissions sets could be tweaked to take into
account the permissions required by the use of unix sockets.
The fix f47d5c70a fix af_unix tests for v8 networking, was never
correct, though it worked and was closer before support for fine
grained inet mediation landed. Before finegrained inet mediation
landed unix rules would allow specifying the permission but inet would
not only allowing coarse socket mediation rules. While the backend
supported finegrained permissions in v8 socket mediation the parser
did not.
If af_unix mediation was not supported by the kernel the af_unix
mediation rule would be downgrade to a network rule. All network
socket rules allowed full permission because the parser didn't
support permissions on socket rules. So the "unix create," rule
was being downgraded to a "unix," rule. Thus the "unix create",
rule was enough permissions, in the downgrade even though it
actually wasn't enough permissions.
With support for fine grained inet permissions, support for permissions
on socket rules also landed. When this happend "unix create," was not
enough permissions any more because it was not downgraded to "unix,",
this resulted in failed mediation.
Fixes: cb4a397b1 ("tests: add attach_disconnected tests")
Fixes: f47d5c70a ("fix af_unix tests for v8 networking")
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1621
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
The attach_disconnected.sh and deleted.sh tests added expanded their
testing by using unix sockets. This however ever needs support of
unix socket mediation.
Provide a minimal fix by setting bailouts for the the tests if the
requirement is not present. Long term it would be better if the
expected/needed permissions sets could be tweaked to take into
account the permissions required by the use of unix sockets.
The fix f47d5c70a fix af_unix tests for v8 networking, was never
correct, though it worked and was closer before support for fine
grained inet mediation landed. Before finegrained inet mediation
landed unix rules would allow specifying the permission but inet would
not only allowing coarse socket mediation rules. While the backend
supported finegrained permissions in v8 socket mediation the parser
did not.
If af_unix mediation was not supported by the kernel the af_unix
mediation rule would be downgrade to a network rule. All network
socket rules allowed full permission because the parser didn't
support permissions on socket rules. So the "unix create," rule
was being downgraded to a "unix," rule. Thus the "unix create",
rule was enough permissions, in the downgrade even though it
actually wasn't enough permissions.
With support for fine grained inet permissions, support for permissions
on socket rules also landed. When this happend "unix create," was not
enough permissions any more because it was not downgraded to "unix,",
this resulted in failed mediation.
Fixes: cb4a397b1 ("tests: add attach_disconnected tests")
Fixes: f47d5c70a ("fix af_unix tests for v8 networking")
Signed-off-by: John Johansen <john.johansen@canonical.com>
toybox is similar to busybox but is developed with Android development in
mind. Thus, it has the same issues as the busybox profile and should be
removed.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
MR: 1561 Added the ability to specify special a keyword to allow
detached mounts. Unfortunately it updated remount to use the device
and devbuffer when remounts current encoding doesn't support it.
This caused the mount.sh regression test to fail in the following
way.
```
$ sudo bash mount.sh
[sudo] password for jj:
using mount rules ...
Error: mount failed. Test 'MOUNT (confined cap bind mount remount rprivate conflict)' was expected to 'pass'. Reason for failure 'FAIL: mount /tmp/sdtest.358520-12403-ASaOnn/mountpoint2 on /tmp/sdtest.358520-12403-ASaOnn/mountpoint failed - Permission denied'
not supported by parser - skipping mount options=(nodirsync),
Error: mount failed. Test 'MOUNT (confined cap mount remount option)' was expected to 'pass'. Reason for failure 'FAIL: mount /dev/loop40 on /tmp/sdtest.358520-12403-ASaOnn/mountpoint failed - Permission denied'
Error: mount failed. Test 'MOUNT (confined cap mount remount)' was expected to 'pass'. Reason for failure 'FAIL: mount /dev/loop40 on /tmp/sdtest.358520-12403-ASaOnn/mountpoint failed - Permission denied'
Error: mount passed. Test 'MOUNT (confined cap mount remount deny option)' was expected to 'fail'
```
Revert the change to remount. This fixes the regression failure.
fa0746f2e parser: add special casing for detached move mounts
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1618
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
MR: 1561 Added the ability to specify special a keyword to allow
detached mounts. Unfortunately it updated remount to use the device
and devbuffer when remounts current encoding doesn't support it.
This caused the mount.sh regression test to fail in the following
way.
```
$ sudo bash mount.sh
[sudo] password for jj:
using mount rules ...
Error: mount failed. Test 'MOUNT (confined cap bind mount remount rprivate conflict)' was expected to 'pass'. Reason for failure 'FAIL: mount /tmp/sdtest.358520-12403-ASaOnn/mountpoint2 on /tmp/sdtest.358520-12403-ASaOnn/mountpoint failed - Permission denied'
not supported by parser - skipping mount options=(nodirsync),
Error: mount failed. Test 'MOUNT (confined cap mount remount option)' was expected to 'pass'. Reason for failure 'FAIL: mount /dev/loop40 on /tmp/sdtest.358520-12403-ASaOnn/mountpoint failed - Permission denied'
Error: mount failed. Test 'MOUNT (confined cap mount remount)' was expected to 'pass'. Reason for failure 'FAIL: mount /dev/loop40 on /tmp/sdtest.358520-12403-ASaOnn/mountpoint failed - Permission denied'
Error: mount passed. Test 'MOUNT (confined cap mount remount deny option)' was expected to 'fail'
```
Revert the change to remount. This fixes the regression failure.
fa0746f2e parser: add special casing for detached move mounts
Signed-off-by: John Johansen <john.johansen@canonical.com>
... and adjust the tools to raise an exception if such a rule is found.
While this is not nice, it's better than the previous behaviour where
only the last 'fstype' was kept, and the others were lost when writing
the rule.
... and adjust the tools to raise an exception if such a rule is found.
While this is not nice, it's better than the previous behaviour where
only the last 'options' was kept, and the others were lost when writing
the rule.
Note: If multiple fstype= or options= are given, this is not detected as
an error (to keep the regex simpler). When writing back such a rule,
only one fstype and options will "survive".
Adjust the exclude list in test-parser-simple-tests.py accordingly:
- several valid mount rules no longer fail
- two invalid mount rules which so far accidentally raised an exception
because of the fstype/options order no longer raise this exception
(conflicting mount options, which are the real reason why these rules
are invalid, are not detected in the tools)
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/501
I propose this fix for 4.0, 4.1 and master. (Note: excluding `mount/ok_opt_86.sd` was added in !1561, so we either need to also backport this, or have to slightly adjust this MR for backporting.)
Closes#501
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1616
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Note: If multiple fstype= or options= are given, this is not detected as
an error (to keep the regex simpler). When writing back such a rule,
only one fstype and options will "survive".
Adjust the exclude list in test-parser-simple-tests.py accordingly:
- several valid mount rules no longer fail
- two invalid mount rules which so far accidentally raised an exception
because of the fstype/options order no longer raise this exception
(conflicting mount options, which are the real reason why these rules
are invalid, are not detected in the tools)
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/501
upsteam move_mount mediation now allows for a detached (disconnected)
mount to be move mounted into a namespace.
Add support for this by detecting 'detached' as a keyword for the
source/device and using it to create a null match. Because existing
mount encoding using a null separator between the mount terms null
match followed by the null seperator will separate detached mounts
within the existing encoding.
```
Eg.
mount detached -> /destination,
mount options=(ro) fstype=ext4 detached -> /destination,
```
This is functionally equivalent to using
```
mount "" -> /destination,
```
However using ```""``` does not provide any context that about what the rule is allowing or why so the ```detached``` form is preferred.
This is not a perfect solution, but is what can be currently supported
by the kernel without more LSM hooks.
On kernels that don't support detached mount detection, rules using
the detached source conditional will be ignored (never matched).
This encoding also allows the existing
```
mount,
mount options=(move),
mount options=(move) -> /destination,
```
to continue to work with both detached and regular mounts on kernels
that support the move_mount() syscall.
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1561
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
The tools are wrong in parsing the detached mount test.
Until that can be fixed, mark the tools as wrong.
Signed-off-by: John Johansen <john.johansen@canonical.com>
upsteam move_mount mediation now allows for a detached (disconnected)
mount to be move mounted into a namespace.
Add support for this by detecting 'detached' as a keyword for the
source/device and using it to create a null match. Because existing
mount encoding using a null separator between the mount terms null
match followed by the null seperator will separate detached mounts
within the existing encoding.
Eg.
mount detached -> /destination,
mount options=(ro) fstype=ext4 detached -> /destination,
This is functionally equivalent to using
mount "" -> /destination,
However using "" does not provide any context that about what the rule is allowing or why so the 'detached' form is preferred.
This is not a perfect solution, but is what can be currently supported
by the kernel without more LSM hooks.
On kernels that don't support detached mount detection, rules using
the detached souce conditional will be ignored (never matched).
This encoding also allows the existing
mount,
mount options=(move),
mount options=(move) -> /destination,
to continue to work with both detached and regular mounts on kernels
that support the move_mount() syscall.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Without the kernel patches in
https://lists.ubuntu.com/archives/apparmor/2025-March/013533.html
these tests will fail. This means spread ci for the majority of
kernels will fail.
Indeed disconnected paths failing in complain mode was always expected
behavior until the above kernel patches were posted.
Instead mark these patches as xpass, so spread CI can pass. These
tests will need to be updated to make them detect if the kernel
supports complain mode with disconnected paths.
Fixes: 089539cbf Merge regression: test complain-mode operations on disconnected paths in mounts
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1614
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Without the kernel patches in
https://lists.ubuntu.com/archives/apparmor/2025-March/013533.html
these tests will fail. This means spread ci for the majority of
kernels will fail.
Indeed disconnected paths failing in complain mode was always expected
behavior until the above kernel patches were posted.
Instead mark these patches as xpass, so spread CI can pass. These
tests will need to be updated to make them detect if the kernel
supports complain mode with disconnected paths.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Two fixes for the remmina profile so we can merge this
1. mknod is not currently an allowed permission. It has to be
downgraded to w
Do that with a note about how this needs to change in the future
2. The original fix adds direct references to peer=(label=unconfined)
Fix this to use a variable. So it will be easier to refactor and
update.
While doing it for the PMR also fixup the other direct unconfined
references.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Disconnected paths on lookups have caused actual permission denials, even
when the loaded profile is in complain mode. This is a test that causes
disconnections using mounts (both old and new API) and then verifies that
a complain mode profile doesn't prevent operations with disconnected fds.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1568
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Representative log lines from the [LaunchPad bug](https://bugs.launchpad.net/ubuntu/+source/apparmor/+bug/2098838):
```
Feb 19 16:34:01 kernel: audit: type=1400 audit(1740000841.920:621): apparmor="DENIED" operation="create" class="net" profile="wpa_supplicant" pid=2211 comm="wpa_supplicant" family="netlink" sock_type="raw" protocol=0 requested="create" denied="create"
Feb 19 16:34:01 kernel: audit: type=1400 audit(1740000841.920:622): apparmor="DENIED" operation="open" class="file" profile="wpa_supplicant" name="/sys/devices/pci0000:00/0000:00:14.3/ieee80211/phy0/name" pid=2211 comm="wpa_supplicant" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
Feb 19 16:34:01 kernel: audit: type=1400 audit(1740000841.920:623): apparmor="DENIED" operation="create" class="net" profile="wpa_supplicant" pid=2211 comm="wpa_supplicant" family="inet" sock_type="dgram" protocol=0 requested="create" denied="create"
Feb 19 16:34:01 kernel: audit: type=1400 audit(1740000841.920:624): apparmor="DENIED" operation="open" class="file" profile="wpa_supplicant" name="/sys/devices/pci0000:00/0000:00:14.3/ieee80211/phy0/name" pid=2211 comm="wpa_supplicant" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
```
However, regression potential remains for other setups (e.g. USB WiFi dongles), and we should maybe open up a discussion about when we want to target profiles into `apparmor.d` as opposed to `extras`.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1554
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
--configdir is meant for testing and should override all other configs,
instead of being combined with them. Config combination causes aa-notify
test failures if e.g. the user-local config sets filtering options.
Also supply a notify.conf file for exclusive use during testing.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1610
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: John Johansen <john@jjmx.net>
The feature matching done in aa_feature_supports calls walk_one to
traverse the features string. This function is supposed to match on
the feature and return, but it matches the feature based on the length
of the feature to check. If the feature to check shorter, then it
would return as if the feature was not present - which was the case
for the following example:
feature_file contains (shortened for example purposes):
```
network_v9 {af_unix {yes
}
}
network_v8 {af_inet {yes
}
}
network {af_unix {yes
}
}
```
if the feature to be checked was simply "network", then walk_one would
return that the feature was not present.
Fix this by restarting the matching if there was not a full match at
the end of the feaure to check.
Fixes: https://bugs.launchpad.net/apparmor/+bug/2105986
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1608
Approved-by: Ryan Lee <rlee287@yahoo.com>
Merged-by: John Johansen <john@jjmx.net>
--configdir is meant for testing and should override all other configs,
instead of being combined with them. Config combination causes aa-notify
test failures if e.g. the user-local config sets filtering options.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Both the unconfined profile and unprivileged_userns are part of the
default notify.conf, so the default fallback when no configurations are
present should also match this default.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
The feature matching done in aa_feature_supports calls walk_one to
traverse the features string. This function is supposed to match on
the feature and return, but it matches the feature based on the length
of the feature to check. If the feature to check shorter, then it
would return as if the feature was not present - which was the case
for the following example:
feature_file contains (shortened for example purposes):
network_v9 {af_unix {yes
}
}
network_v8 {af_inet {yes
}
}
network {af_unix {yes
}
}
if the feature to be checked was simply "network", then walk_one would
return that the feature was not present.
Fix this by restarting the matching if there was not a full match at
the end of the feaure to check.
Fixes: https://bugs.launchpad.net/apparmor/+bug/2105986
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
The original location of the error count checks in the middle of the priority function helper was completely nonsensical. We can instead do this check just once after running all the tests.
In addition, some tests in the priority helper don't use the priority variables at all, and are moved out of the helper to avoid repeating the exact same sequence of tests 16 times.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1604
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
The original location in the middle of the priority function helper was
completely nonsensical. We can instead do this check just once after
running all the tests.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Fixes https://bugs.launchpad.net/apparmor/+bug/2106033
Improve the validation of AARE file paths by introducing a new regex
that supports paths starting with '{' (e.g. '{/,/org/freedesktop/DBus}').
These paths are notably used in snap.lxd.* profiles.
Signed-off-by: Maxime Bélair <maxime.belair@canonical.com>
Fixes: https://bugs.launchpad.net/maas/+bug/2092232
In the lsblk profile, the rule responsible for allowing to read disks
over network was not generic enough to handle some cases, such as IBM
Power. The new rule, `@{sys}/devices/**/host@{int}/** r`, should support
all cases.
Signed-off-by: Maxime Bélair <maxime.belair@canonical.com>
If the following scenario was present in a profile, cleanprof
would fail with a RecursionError exception (maximum recursion
depth exceeded)
/parent { }
/parent///child { }
This occured because in aa.py, in the write_piece function, the
wrong depth was being passed, along with a wrong hat. The
formatting of the spaces was also incorrect.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1605
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
If the following scenario was present in a profile, cleanprof
would fail with a RecursionError exception (maximum recursion
depth exceeded)
/parent { }
/parent///child { }
This occured because in aa.py, in the write_piece function, the
wrong depth was being passed, along with a wrong hat. The
formatting of the spaces was also incorrect.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Profiles that are defined like below did not have the parent attribute
set in profile storage:
/parent///child {}
The condition on which child profiles were written was also changed so
they are not removed from the profile if /parent does not exist.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Commit c9d41a3ebb introduced a regression on profile header
generation.
This commit removes the name parameter from the get_header function
since the ProfileStorage should already contain all the information
required to generate the header for profiles and hats. The tests
needed to be updated as well to make sure the ProfileStorage object
contained the information needed by the get_header method.
Fixes: c9d41a3ebb ("utils: fix profile and hat header generation")
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1602
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: Christian Boltz <apparmor@cboltz.de>
Commit c9d41a3ebb introduced a regression on profile header
generation.
This commit removes the name parameter from the get_header function
since the ProfileStorage should already contain all the information
required to generate the header for profiles and hats. The tests
needed to be updated as well to make sure the ProfileStorage object
contained the information needed by the get_header method.
Fixes: c9d41a3ebb ("utils: fix profile and hat header generation")
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
We are seeing some test failures caused by the fact that a fixed kernel,
while available, is not installed the CI image. Since cloud-init does
not itself offer a way to express precise dependency on a package
version we may use a crude replacement of upgrading all the packages at
image construction time.
The next time this happens all we need is to touch the .image-garden.mk
file, so that it is more recent than the image kept in CI cache for the
re-generation to occur.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1595
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: Georgia Garcia <georgia.garcia@canonical.com>
We are seeing some test failures caused by the fact that a fixed kernel,
while available, is not installed the CI image. Since cloud-init does
not itself offer a way to express precise dependency on a package
version we may use a crude replacement of upgrading all the packages at
image construction time.
The next time this happens all we need is to touch the .image-garden.mk
file, so that it is more recent than the image kept in CI cache for the
re-generation to occur.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
The header was being generated incorrectly in 2 cases:
When the profile/hat contained the parent profile in its name, as in
profile firefox//dash {
hat ^firefox//dash {
and in the unit tests, the child profile or hat was being named as the
parent profile. This was not caught by the general case because the
code has not yet been fully adapted to handle multiple nested child
profiles.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/493
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
The test is added as XFAIL for all images because the kernel patches
required for them to pass have not yet been upstreamed into any published
kernel.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Disconnected paths on lookups have caused actual permission denials, even
when the loaded profile is in complain mode. This is a test that causes
disconnections using mounts (both old and new API) and then verifies that
a complain mode profile doesn't prevent operations with disconnected fds.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
This involves replacing `command -v` with `which` (again), since the `command` shell builtin isn't recognized by older versions of Make, as well as skipping tests that require the `linux/mount.h` header on older systems that lack it.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1578
Approved-by: Zygmunt Krynicki <me@zygoon.pl>
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
The new image-garden snap offers a one-stop-shop for integration
testing, bundling qemu, spread and image-garden build recipes.
Extend the documentation, the run-spread.sh helper script as well as
spread.yaml to support this new method.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
The command shell builtin is not recognized by older versions of make, so
switch back to using the which binary instead.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
linux/mount.h is only used in the move_mount test, which exercises the
move_mount syscall that was introduced sometime in 2018 or later. Older
systems without the header also lack the syscall, so we can just skip the
test in those cases.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Fixes bug #2103524
lsblk on some virtualized systems require access to directory
/sys/devices/LNXSYSTM:*/LNXSYBUS:*/** since block devices can be exposed
in this directory.
Making a previously non-const pointer arg const is not an ABI break, and
having const expresses the intent of the interface better
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
For executables dynamically linked to libnuma, the runtimer linker
invokes libnuma functions (num_init) that try to access
/sys/devices/system/node/ and if the application's apparmor
profile does not allow this access, this access will be denied
by apparmor with following error message:
apparmor="DENIED" operation="open" class="file"
name="/sys/devices/system/node/" comm="qemu-bridge-hel"
requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
Here is the simplified call trace:
0 ... in ?? () from /lib/x86_64-linux-gnu/libnuma.so.1
1 ... in call_init (...) at ./elf/dl-init.c:74
2 ... in call_init (...) at ./elf/dl-init.c:120
3 _dl_init (...) at ./elf/dl-init.c:121
4 ... in _dl_start_user () from /lib64/ld-linux-x86-64.so.2
This commit adds an abstract profile that applications that are
linked to libnuma can include in their apparmor profile.
MR: mailing list patch
Signed-off-by: Hector Cao <hector.cao@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
When doing testing via LXD VMs and in particular when using "lxc exec" to run
commands in the VM, there is no controlling tty and so the output of last is
missing this column of data. Instead try even harder to parse the timestamp from
the output of "last".
Signed-off-by: Alex Murray <alex.murray@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1582
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
When doing testing via LXD VMs and in particular when using "lxc exec" to run
commands in the VM, there is no controlling tty and so the output of last is
missing this column of data. Instead try even harder to parse the timestamp from
the output of "last".
Signed-off-by: Alex Murray <alex.murray@canonical.com>
* Make glob_pattern more readable
- replace filename and variable regex parts with RE_PROFILE_PATH_OR_VAR
- split to multiline string
* Move `[\w-]+` into inner match group by removing/moving the ')' after the empty source.
* Prepare source_fileglob_pattern and dest_fileglob_pattern to be customizable by moving adding the closing ')))' into each of them.
* Allow empty source and any word only in mount source
See the individual commits for details.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1574
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
The attach_disconnected.ipc flag allows the use of disconnected paths
on posix mqueues. This flag is a subset of attach_disconnected, and it
does not allow disconnected paths for all files.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
When running aa-disable and then aa-enforce passing the binary path as
the argument, aa-enforce fails to enforce the profile with the error:
$ sudo aa-disable /home/foo/test
skipping disabled profile test
Profile for /home/foo/test not found, skipping
According to the man page for aa-enforce, it should work for disabled
profiles.
Note that this does not happen when passing the profile directly to
the tools, so there's a workaround for this issue:
$ sudo /aa-enforce /etc/apparmor.d/test
Setting /etc/apparmor.d/test to enforce mode.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1579
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
When running aa-disable and then aa-enforce passing the binary path as
the argument, aa-enforce fails to enforce the profile with the error:
$ sudo aa-disable /home/foo/test
skipping disabled profile test
Profile for /home/foo/test not found, skipping
According to the man page for aa-enforce, it should work for disabled
profiles.
Note that this does not happen when passing the profile directly to
the tools, so there's a workaround for this issue:
$ sudo /aa-enforce /etc/apparmor.d/test
Setting /etc/apparmor.d/test to enforce mode.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
... by removing/moving the ')' after the empty source.
Also prepare source_fileglob_pattern and dest_fileglob_pattern to be
customizable by moving adding the closing ')))' into each of them.
Add quotes if a mount source or mountpoint includes whitespace.
Also explicitely handle empty mount source (known from
1f33fc9b29)
As usual, some tests can't hurt ;-)
First expand nested `(...)` in glob_pattern. This duplicates a few bytes, but makes the regex easier to read.
With that done, allow `-` in glob_pattern.
One of the possible matches in glob_pattern was `\w+` which matched for example `none`.
However, it doesn't match `revokefs-fuse` because of the `-`. Therefore change `\w+` to [\w-]+.
While on it, add two more tests - one for `none` with some options, and one with `revokefs-fuse`.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1565
Approved-by: Maxime Bélair <maxime.belair@canonical.com>
Approved-by: Ryan Lee <rlee287@yahoo.com>
Merged-by: Christian Boltz <apparmor@cboltz.de>
The aa-exec man page makes reference to aa-stack(8) and aa-namespace(8)
manpages that don't exist. For now just remove those references and
add a short blurb on using aa-exec with stacking and namespaces.
Proper full manpages for stacking and namespaces need to be added
but that is beyound the scope of this fix.
Bug: https://gitlab.com/apparmor/apparmor/-/issues/496
Signed-off-by: John Johansen <john.johansen@canonical.com>
* passwd -e LOGIN was failing
* Allow execution of /usr/sbin/nscd
See: bee77ffc29/lib/nscd.c (L23-L27)
* Allow pam_passwdqc to read /etc/passwdqc.conf and passwdqc filter
files (see https://www.openwall.com/passwdqc/)
* Allow setuid & fsetid capabilities
* Allow locking with /etc/shadow.PID & /etc/shadow.lock
* Allow shadow backup /etc/shadow- and whatever /etc/shadow+ is used for
One of the possible matches in glob_pattern was `\w+` which matched for
example `none`.
However, it doesn't match `revokefs-fuse` because of the `-`. Therefore
change `\w+` to [\w-]+.
While on it, add two more tests - one for `none` with some options, and
one with `revokefs-fuse`.
The utils should be able to skip profiles that it can't parse now,
so this test suite bypass mechanism should no longer be necessary.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Since all the tools that load profiles go through the same module, this should
be sufficient as a first pass.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
This will allow the other tools to continue working on other profiles, even
if some of them use syntax that the utils currently can't handle.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
The utils cannot parse some of the newer profile constructs yet, so
generalize a pre-existing mechanism for skipping profiles to use that mechanism in the other tests that need it
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Instead of relying on neverssl.com spin up a local http server and test
tinyproxy against that to ensure the test can run even if the wider internet is
not accessible.
Signed-off-by: Alex Murray <alex.murray@canonical.com>
This imports translations from launchpad up to commit
revno: 2523
committer: Launchpad Translations on behalf of apparmor-dev
branch nick: apparmor
timestamp: Fri 2025-02-21 09:32:26 +0000
message:
Launchpad automatic translations update.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Similarly to apparmor/apparmor!403, we don't really need to pass these flags
here, but if we don't, blhc raises a false positive, and I don't want to get
used to ignoring blhc failures on Debian's GitLab CI.
sbuild is an unconfined profile allowing it to bypass the unprivlieged
user namespace restriction.
unconfined profiles use a pix transition which means that when the
unprivileged_unshare profile is enabled, the binaries in an unconfined
profile calling unshare will cause a transition to the unprivileged_unshare
profile.
This will break sbuild because it needs capabilities within the
user namespace.
However we cannot just add a x transition rule to unconfined profiles, as
the transitions won't be respected. Instead, we have to make the profile
a default allow profile and add a transition that will override
the default pix transition of allow all.
We have to add the attached_disconnected and mediated_deleted flags
because sbuild is manipulating mounts.
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1555
Approved-by: Ryan Lee <rlee287@yahoo.com>
Merged-by: Georgia Garcia <georgia.garcia@canonical.com>
sbuild is an unconfined profile allowing it to by-pass the unprivlieged
user namespace restritction.
unconfined profiles us a pix transition which means when the
unprivileged_unshare profile is enabled, the binaries in an unconfined
profile calls unshare it will transition to the unprivileged_unshare
profile.
This will break sbuild because it needs capabilities within the
user namespace.
However we can not just add a x transition rule to unconfined profiles,
the transitions won't be respected. Instead we have to make the profile
a default allow profile, and add a transition that will override
the default pix transition of allow all.
We have to add the attached_disconnected and mediated_deleted flags
because sbuild is manipulating mounts.
Signed-off-by: John Johansen <john.johansen@canonical.com>
In the following policy, "ptrace" would be dropped during merging:
```
$FOO=true
/bin/true {
if $FOO {
ptrace,
}
}
```
Current behavior:
```
----- Debugging built structures -----
Name: /bin/true
Local To: <NULL>
Mode:
```
With patch:
```
----- Debugging built structures -----
Name: /bin/true
Local To: <NULL>
Mode:
ptrace,
```
I am quite new to the AA code base, so please let me know if I'm missing something obvious and this is intended behavior :)
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1551
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
The original plan was to have a minimal subset for Perl excluding the stuff requiring language-dependent typemaps, but it turns out that there was only one thing that required that, and it was simple enough to copy over from the SWIG repo itself. This MR contains the single non-language-generic part of the SWIG updates.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1341
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: Georgia Garcia <georgia.garcia@canonical.com>
In the following policy, "ptrace" would be dropped during merging:
$FOO=true
/bin/true {
if $FOO {
ptrace,
}
}
Current behavior:
----- Debugging built structures -----
Name: /bin/true
Local To: <NULL>
Mode:
With patch:
----- Debugging built structures -----
Name: /bin/true
Local To: <NULL>
Mode:
ptrace,
This is the only language-dependent nontrivial portion of the SWIG
bindings, and this should be good enough for anyone who is still using the
Perl bindings now
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
When a test fails because of an unexpected success (XFAIL), do not display the empty error log as that may confuse the reader just as it had confused the author.
In addition, when something legitimately fails then display tail of trace log as that may show some useful information.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1548
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
This makes no sense since the test has passed and there's nothing to look at in the log.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
We should be using apparmor controlled domains for these files.
Rename the template file from
com.ubuntu.pkexec.aa-notify.policy
to
net.apparmor.pkexec.aa-notify.policy
And update the template file and the install file so that the files
that are generated use net.apparmor instead of com.ubuntu
Signed-off-by: John Johansen <john.johansen@canonical.com>
Closes#486
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1541
Approved-by: Ryan Lee <rlee287@yahoo.com>
Merged-by: John Johansen <john@jjmx.net>
We should be using apparmor controlled domains for these files.
Rename the template file from
com.ubuntu.pkexec.aa-notify.policy
to
net.apparmor.pkexec.aa-notify.policy
And update the template file and the install file so that the files
that are generated use net.apparmor instead of com.ubuntu
Signed-off-by: John Johansen <john.johansen@canonical.com>
The install of the polkit action files for aa-notify leaks build root
information.
From OBS
apparmor-utils.noarch: E: file-contains-buildroot (Badness: 10000) /usr/share/polkit-1/actions/com.ubuntu.pkexec.aa-notify.policy
this is present on Ubuntu as well
<annotate key="org.freedesktop.policykit.exec.path">/build/apparmor-ZUzkoL/apparmor-4.1.0~beta4/debian/tmp/usr/lib/python3/dist-packages/apparmor/update_profile.py</annotate>
this occurs because the {LIB_PATH} template variable is being replaced
with the self.install_lib. Make sure we strip the build prefix if
we are generating the files in a build environment instead of doing
a direct install.
Closes: https://gitlab.com/apparmor/apparmor/-/issues/486
Signed-off-by: John Johansen <john.johansen@canonical.com>
Closes#486
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1540
Approved-by: Ryan Lee <rlee287@yahoo.com>
Merged-by: John Johansen <john@jjmx.net>
This PR only adds the digit `@{d}` and integer `@{int}` variables.
It provides two improvements from the use of the `[0-9]*` glob:
- security: the glob means "a digit followed by anything but `/`", whereas `@{int}` means "up to 10 digits"
Next to the
- stability: using glob in path with `x` can expose to path conflict, removing the glob fixed a lot of issues.
These variables are used by a lot of abstractions that could be upstream here from apparmor.d (PR will follow). It is an import from 33681e14f2/apparmor.d/tunables/multiarch.d/system where other similar variables are in use: `@{hex}`, `@{rand}`, `@{word}`, `@{u8}`, `@{u16}`, `@{u64}`, `@{int2}...@{int64}` ...
They also all could be upstreamed here.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1544
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
The install of the polkit action files for aa-notify leaks build root
information.
From OBS
apparmor-utils.noarch: E: file-contains-buildroot (Badness: 10000) /usr/share/polkit-1/actions/com.ubuntu.pkexec.aa-notify.policy
this is present on Ubuntu as well
<annotate key="org.freedesktop.policykit.exec.path">/build/apparmor-ZUzkoL/apparmor-4.1.0~beta4/debian/tmp/usr/lib/python3/dist-packages/apparmor/update_profile.py</annotate>
this occurs because the {LIB_PATH} template variable is being replaced
with the self.install_lib. Make sure we strip the build prefix if
we are generating the files in a build environment instead of doing
a direct install.
Closes: https://gitlab.com/apparmor/apparmor/-/issues/486
Co-Author: Ryan Lee <ryan.lee@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
On certain lxc containers, when aa-genprof tries to set
printk_ratelimit, it fails with the OSError exception, with the
message "OSError: [Errno 30] Read-only file system" instead of
PermissionError.
Since PermissionError is a subclass of OSError, replace it by broader
OSError exception to include both cases in which running aa-genprof
fails.
Reported-by: Paulo Flabiano Smorigo <paulo.smorigo@canonical.com>
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1539
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Instead of setting those variables unconditionally, set them if they
aren't externally set by environment variables. This will allow for usages
like DESTDIR=/some/other/dir make install in the utils directory.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
On certain lxc containers, when aa-genprof tries to set
printk_ratelimit, it fails with the OSError exception, with the
message "OSError: [Errno 30] Read-only file system" instead of
PermissionError.
Since PermissionError is a subclass of OSError, replace it by broader
OSError exception to include both cases in which running aa-genprof
fails.
Reported-by: Paulo Flabiano Smorigo <paulo.smorigo@canonical.com>
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Changes include:
- using `long` instead of `intmax_t` for `pid_t` typemap (32-bit build failure); see commit message for more details
- specifying messages for `static_assert` declarations (required up until C23, was accepted as a compiler extension on the systems I had tested this on previously)
- removing label-followed-by-declaration instance (also a C23 feature supported as extension)
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1536
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
The documentation was missing information about path sanitization, and
why you shouldn't do a leading @{VAR} on path rules. While the example
doing this was fixed, actual information about why you shouldn't do
this was missing.
Document how apparmor will collapse consecutive / characters into a
single character for paths, except when this occurs at the start of
the path.
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1532
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: John Johansen <john@jjmx.net>
The message being optional is apparently a C23 thing that was available as an extension on the systems I tested on previously
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
The previous code using intmax_t failed to build on armhf because
intmax_t was long long int instead of long int on that platform.
As to shrinking down to a long: not only does SWIG lack a
SWIG_AsVal_intmax_t, but aalogparse also assumes PIDs fit in a long
by storing them as unsigned longs in aa_log_record. Thus, we can
assume that sizeof(pid_t) <= sizeof(long) right now and deal with
the big headache that a change to pid_t would cause if it becomes
larger than a long in the future.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
The documentation was missing information about path sanitization, and
why you shouldn't do a leading @{VAR} on path rules. While the example
doing this was fixed, actual information about why you shouldn't do
this was missing.
Document how apparmor will collapse consecutive / characters into a
single character for paths, except when this occurs at the start of
the path.
Signed-off-by: John Johansen <john.johansen@canonical.com>
The unshare-userns-restrict profile contained a cx transition to
transition to a profile that allows most things while denying
capabilities:
audit allow cx /** -> unpriv,
However, this transition does not stack the unshare//unpriv profile
against any other profile the target binary might have had. As a result,
the lack of stacking resulted in a non-namespace-related sandboxing
bypass in which attachments of other profiles that should have confined
the target binary do not get applied. Instead, we adopt a stack similar
to the one in bwrap-userns-restrict, with the exception that unshare
does not use no-new-privs and therefore only needs a two-layer stack
instead of a three-layer stack.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1533
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: John Johansen <john@jjmx.net>
The unshare-userns-restrict profile contained a cx transition to
transition to a profile that allows most things while denying
capabilities:
audit allow cx /** -> unpriv,
However, this transition does not stack the unshare//unpriv profile
against any other profile the target binary might have had. As a result,
the lack of stacking resulted in a non-namespace-related sandboxing
bypass in which attachments of other profiles that should have confined
the target binary do not get applied. Instead, we adopt a stack similar
to the one in bwrap-userns-restrict, with the exception that unshare
does not use no-new-privs and therefore only needs a two-layer stack
instead of a three-layer stack.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
- Remove `owner` in /proc/ rules to enable non-root users
- add "include if exists" line to pass the pipeline
- change <abstractions/nameservice> to smaller <abstractions/nameservice-strict>
Signed-off-by: Allen Huang <allen.huang@canonical.com>
Some weirdnesses:
- The Perl abstraction specifies an ix execution mode for Perl, while my impression from the Python abstraction is that we shouldn't be specifying execution modes for the script interpreter in the abstractions. It's probably too late to change that though.
- Tcl apparently doesn't have an abstraction available. Given the way it's embedded into applications like ZNC, I'm assuming that Tcl doesn't have support files the way Python does.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1376
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: John Johansen <john@jjmx.net>
Add AA profile for tnftp. This profile has been tested on the latest oracular tnftp version 20230507-2build3 which is also the latest upstream version. This profile limits the file downloads to common download directories and /tmp. It also cripples the "!" command denying access to network and allowing the execution of binaries located directories for which we deny write access. Any feedback is welcome.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1363
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: John Johansen <john@jjmx.net>
Add AA profile for `socat`. This profile has been tested on the latest oracular socat version `1.8.0.0-4build3` and the latest upstream version `1.8.0.1`. I raised the PR and this profile has already been merged on the `roddhjav/apparmor.d` repo, [here](https://github.com/roddhjav/apparmor.d/pull/454). For now, I have added this profile in "extra", but let me know if you think otherwise, any feedback is welcome.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1319
Approved-by: Ryan Lee <rlee287@yahoo.com>
Merged-by: John Johansen <john@jjmx.net>
The current behavior of priority rules can be non-intuitive with
higher priority rules completely overriding lower priority rules even in
permissions not held in common. This behavior does have use cases but
its can be very confusing, and does not normal policy behavior
Eg.
priority=0 allow r /**,
priority=1 deny w /**,
will result in no allowed permissions even though the deny rule is
only removing the w permission, beause the higher priority rule
completely over ride lower priority permissions sets (including
none shared permissions).
Instead move to tracking the priority at a per permission level. This
allows the w permission to still override at priority 1, while the
read permission is allowed at priority 0.
The final constructed state will still drop priority for the final
permission set on the state.
Note: this patch updates the equality tests for the cases where
the complete override behavior was being tested for.
The complete override behavior will be reintroduced in a future
patch with a keyword extension, enabling that behavior to be used
for ordered blocks etc.
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1522
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
The existing test checks that the tinyproxy systemd service is confined. However
it is possible that this confinement is based on systemd launching tinyproxy
with the expected profile, rather than tinyproxy running under the profile due
to path-based attachment. So add an explicit check for this as well as requested
by @zyga-aka-zygoon in
https://gitlab.com/apparmor/apparmor/-/merge_requests/1477#note_2334724042
Signed-off-by: Alex Murray <alex.murray@canonical.com>
This profile deliberately does not use `abstractions/audio`, instead listing only the subset of the interfaces required to enumerate audio devices and control their volume, without the parts needed to actually send or receive audio from them. This could also be a useful basis for splitting `abstractions/audio` into finer-grained subcomponents.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1517
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
This requires a runner with the tags: linux, x86_64, kvm. One needs to
be provisioned for the AppArmor project for the pipeline to function.
It is possible to run the same tests on SAAS runners offered by GitLab
but due to issue gitlab-org/gitlab-runner#6208 there is no way to expose
/dev/kvm on the host to the guest. Without this feature emulation works
but is rather slow as to be impractical.
Note that there's some overlap between the build-all job and spread that
might be avoided in the future. At present this is made more difficult
by the fact that the path where build-all job builds libapparmor is
stored internally by autotools. This prevents us from using GitLab
artifacts from moving the built files across to the spread testing jobs
without extra work.
In addition to adding the spread job, remove test-build-regression job.
This job is now redundant since the same operation is done when spread
builds and runs regression tests.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1512
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Unfortunately similar to bwrap unshare will need the mediate_deleted
flag in some cases.
see
commit 6488e1fb7 "profiles: add mediate_deleted to bwrap"
Signed-off-by: John Johansen <john.johansen@canonical.com>
The current behavior of priority rules can be non-intuitive with
higher priority rules completely overriding lower priority rules even in
permissions not held in common. This behavior does have use cases but
its can be very confusing, and does not normal policy behavior
Eg.
priority=0 allow r /**,
priority=1 deny w /**,
will result in no allowed permissions even though the deny rule is
only removing the w permission, beause the higher priority rule
completely over ride lower priority permissions sets (including
none shared permissions).
Instead move to tracking the priority at a per permission level. This
allows the w permission to still override at priority 1, while the
read permission is allowed at priority 0.
The final constructed state will still drop priority for the final
permission set on the state.
Note: this patch updates the equality tests for the cases where
the complete override behavior was being tested for.
The complete override behavior will be reintroduced in a future
patch with a keyword extension, enabling that behavior to be used
for ordered blocks etc.
Signed-off-by: John Johansen <john.johansen@canonical.com>
The original patch adding priority to the set of prefixes failed to
update the prefix dump to include the priority priority field.
Fixes: e3fca60d1 ("parser: add the ability to specify a priority prefix to rules")
Signed-off-by: John Johansen <john.johansen@canonical.com>
The priority field is only used during state construction, and can
even prevent later optimizations like minimization. The parser already
explcitily clears the states priority field as part of the last thing
done during construction so it doesn't prevent minimization
optimizations.
This means the state priority not only wastes storage because it is
unused post construction but if used it could introduce regressions,
or other issues.
The change to the minimization tests just removes looking for the
priority field that is no longer reported.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Like was done for the other MatchFlags switch to using a node type
instead of dynamic_cast as this will result in a performance
improvement.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Introduce the EXPECT_DENIALS environment variable for profile tests.
Each line of EXPECT_DENIALS is a regex that must match an AppArmor
denial for the corresponding test, and conversely.
This ensures that problematic behaviors are correctly blocked and logged.
Signed-off-by: Maxime Bélair <maxime.belair@canonical.com>
tinyproxy does not need all of nameservice, nameservice-strict is
sufficient. Thanks to @cboltz for the suggestion.
Signed-off-by: Alex Murray <alex.murray@canonical.com>
Add comments to the profile to explain the use of the local override if the
default configuration is changed. As suggested by @rlee287.
Signed-off-by: Alex Murray <alex.murray@canonical.com>
Add rules to allow tinyproxy to bind to privileged ports and access files even
when run as unprivileged/privileged users when using non-standard
configurations. As suggested by @rlee287.
Signed-off-by: Alex Murray <alex.murray@canonical.com>
This was tested using the test-tinyproxy.py script from qa-regression-testing as
well as by running the upstream test suite with a brief hack to ensure it
invokes tinyproxy with aa-exec -p tinyproxy first.
Signed-off-by: Alex Murray <alex.murray@canonical.com>
Profile for `tar` package.
In order to test this, I've diffed the output of the `tar`'s testsuite with and without the profile:
```
sudo apt build-dep tar
apt source tar
cd tar-*/
./configure
cd tests/
./testsuite > without_profile.log
apparmor_parser ~/tar
./testsuite > with_profile.log
diff without_profile.log with_profile.log # should not output anything
echo $? # should be zero
```
Additionally, [the testsuite available on QRT](https://git.launchpad.net/qa-regression-testing/tree/scripts/test-tar.py) for the `tar` package should continue to pass after loading the profile.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1453
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
We were not building or caching the .seed.iso target, causing make to re-create
the image, as seen in the make --debug --dry-run output:
```
Updating goal targets....
File ubuntu-cloud-24.04.user-data does not exist.
Must remake target ubuntu-cloud-24.04.user-data.
echo "${USER_DATA}" | tee ubuntu-cloud-24.04.user-data
Successfully remade target file ubuntu-cloud-24.04.user-data.
File ubuntu-cloud-24.04.meta-data does not exist.
Must remake target ubuntu-cloud-24.04.meta-data.
echo "${META_DATA}" | tee ubuntu-cloud-24.04.meta-data
Successfully remade target file ubuntu-cloud-24.04.meta-data.
Prerequisite ubuntu-cloud-24.04.user-data is newer than target ubuntu-cloud-24.04.seed.iso.
Prerequisite ubuntu-cloud-24.04.meta-data is newer than target ubuntu-cloud-24.04.seed.iso.
Must remake target ubuntu-cloud-24.04.seed.iso.
/usr/bin/genisoimage \
-input-charset utf-8 \
-output ubuntu-cloud-24.04.seed.iso \
-volid CIDATA \
-joliet \
-rock \
-graft-points \
user-data=ubuntu-cloud-24.04.user-data \
meta-data=ubuntu-cloud-24.04.meta-data
Successfully remade target file ubuntu-cloud-24.04.seed.iso.
Prerequisite ubuntu-cloud-24.04.seed.iso is newer than target ubuntu-cloud-24.04.x86_64.qcow2.
```
Build and cache the cloud-init seed iso to prevent that.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
We are seeing images cached and then re-constructed as if something had
changed in the meanitime. Debug image construction with make --dry-run --debug.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
This way there's somewhat less repetition and the flow of job definitions is,
at least to me, easier to read.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
Our cache is rather compressed already, so this should help
a little with wall-clock time.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
A new explicit, non-parallel job is injected when the .image-garden.mk or
.spread.yaml file changes. This job warms up the cache for the subsequent
parallel testing jobs.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
As a security measure, GitLab splits cache into two broad pools: protected and
non-protected. Any job running in a protected branch has access to the
protected cache pool. All other jobs run in the non-protected cache pool.
This effectively forces us to push to cache in non-protected branches, like all
the merge requests, in order to actually use the cache.
Ideally we'd disable this protection and only push from the default branch and
pull otherwise, as changes to dependency set is rather rare.
[1] https://docs.gitlab.com/ee/ci/caching/#use-the-same-cache-for-all-branches
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
This job is now redundant since the same operation is done when spread
builds and runs regression tests.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
This requires a runner with the tags: linux, x86_64, kvm. One needs to
be provisioned for the AppArmor project for the pipeline to function.
It is possible to run the same tests on SAAS runners offered by GitLab
but due to issue gitlab-org/gitlab-runner#6208 there is no way to expose
/dev/kvm on the host to the guest. Without this feature emulation works
but is rather slow as to be impractical.
Note that there's some overlap between the build-all job and spread that
might be avoided in the future. At present this is made more difficult
by the fact that the path where build-all job builds libapparmor is
stored internally by autotools. This prevents us from using GitLab
artifacts from moving the built files across to the spread testing jobs
without extra work.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
There's contention between running spread across many nodes, in chunks,
in a CI/CD pipeline, and running spread on one machine, across many
instances at the same time. The case with CI/CD needs one worker, as
parallelism is provided by GitLab. The case with local spread needs many
workers as parallelism is provided locally by spread allocating new
instances.
At present we need to focus on the CI/CD case. I have a plan on how to
avoid the problem entirely down the line, by running multiple copies of
spread locally, as if everything was done in a CI/CD pipeline.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
A number of tests are failing and since spread does not contain a native
XFAIL facility, we have to maintain a silent-failure feature code
ourselves. A few of those have been fixed since the first iteration of
this patch. The remaining known failures are being fixed.
Later on I would like to separate XFAIL from SKIP so that if a test is
known to exercise kernel feature unavailable on the given system, the
test is just not executed.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1483
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Python 3.13 changes the formatting of long-short option pairs that use a
meta-variable. Up until 3.13 the meta-variable was repeated. Since
Python change [1] the meta-var is only printed once.
[1] https://github.com/python/cpython/pull/103372
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
This is so that we get a baseline that passes to enable testing in CI/CD
but also to spark a discussion around what to do with a profile that
indirectly relies on a kernel feature that is not available on a given
system.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
A number of tests are failing and since spread does not contain a native
XFAIL facility, we have to maintain a silent-failure feature code
ourselves. A few of those have been fixed since the first iteration of
this patch. The remaining known failures are being fixed.
Later on I would like to separate XFAIL from SKIP so that if a test is
known to exercise kernel feature unavailable on the given system, the
test is just not executed.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
Since kernel commit 8c4b785a86be the class is available to check if
the log belongs to which class. This fixes cases where the logparser
is not able to distinguish between network and file operations.
This issue does not manifest previous to and including apparmor-4.0
because we did not process auditing logs then.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/478
Reported-by: vyomydv vyom.yadav@canonical.com
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
The "last" command, which was supplied by util-linux in older Ubuntu
versions, is now supplied by wtmpdb in Oracular and Plucky. Unfortunately,
this changed the output format and broke our column based parsing.
While the wtmpdb upstream has added json support at
https://github.com/thkukuk/wtmpdb/issues/20, we cannot use it because
we need to support systems that do not have this new feature added.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Unfortunately we are affected by the backwards-incompatible change introduced by https://github.com/swig/swig/pull/2907
These wrappers will be needed to fix tests on systems using SWIG 4.3 or later, e.g. Ubuntu Plucky.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
By making the test a file to be included as a helper, we can reuse most of the code for a fuse_overlayfs test without copy-pasting
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
We now have GitLab CI/CD pipeline co-existing with spread, coupled with
image-garden and the cloud-init profile defined for each distribution.
To avoid duplicating list of required dependencies, re-use cloud-init
profile as the reference list of dependencies (superset between build
and test) to install.
In addition to the dependency list, the build_all job now re-uses spread
prepare section in similar fashion. If it builds in spread, it should
build in CI as well.
A small quality-of-life improvement is the shape of a collapsible
section around dependency installation should make reading job logs
easier.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1494
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: Zygmunt Krynicki <me@zygoon.pl>
Our ubuntu packaging builds Python-enabled libapparmor's in the directories `libapparmor/libapparmor.python[version_identifier]`. In order for the util's `make check` to pick up on the correct libapparmor during the Ubuntu build process, we need the ability to override its search path. This patch introduces a `LIBAPPARMOR_BASEDIR` variable to allow for that.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1497
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: Georgia Garcia <georgia.garcia@canonical.com>
The first patch fixes a `test-aa-notify.py` `TypeError` when `APPARMOR_NOTIFY` and `__AA_CONFDIR` are both specified, which is something that was broken all this time.
The second patch ensures that `aa-notify` in the test suite is run using the same Python interpreter that the test suite itself is run with, which is necessary for testing the utils under different Pythons.
The third patch does analogous modifications to the minitools tests that launch `aa-audit`, `aa-complain`, etc.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1498
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: Georgia Garcia <georgia.garcia@canonical.com>
This should be a more readable example to follow in other tests. The
toybox test was special given the fact that it is a shell itself, and is
fairly programmable.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
Using gdb in batch mode, put a breakpoint on _start and spawn the
process. Then using the built-in python interpreter print the
confinement label on the process and terminate everything.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
We now have GitLab CI/CD pipeline co-existing with spread, coupled with
image-garden and the cloud-init profile defined for each distribution.
To avoid duplicating list of required dependencies, re-use cloud-init
profile as the reference list of dependencies (superset between build
and test) to install.
In addition to the dependency list, the build_all job now re-uses spread
prepare section in similar fashion. If it builds in spread, it should
build in CI as well.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
os.environ returns a string, but the default value is a list, and the concatenation of __AA_CONFDIR assumes a list.
Thus, if APPARMOR_NOTIFY and __AA_CONFDIR were both specified, this would error out.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Tests that interact with the kernel are skipped (tests/regression and
tests/snapd) but everything else is green. Most of the tests are
actually passing. The only exception is the aa-notify test that was
broken by Python 3.13 stdlib change. The fix for that has been posted
separately.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1496
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: Zygmunt Krynicki <me@zygoon.pl>
Tests that interact with the kernel are skipped (tests/regression and
tests/snapd) but everything else is green. Most of the tests are
actually passing. The only exception is the aa-notify test that was
broken by Python 3.13 stdlib change. The fix for that has been posted
separately.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
Hopefully more and more profiles will come with smoke tests. Since the
pattern of those tests is likely to be very similar (compile profile,
run some programs, remove profile) it will be good to check if the
profile had caused any denials to be logged. Having this at the suite
level should make writing actual tests easier.
The prepare-each and restore-each logic compile the profile, check for
errors and finally remove the profile. The debug-each logic shows the
program name (with full path).
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
Those fell under the radar during the initial push to expose all of
the tests to spread.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
The openSUSE project has decided to switch to security=selinux by
default. For the purpose of continuing to test AppArmor on the
distribution, alter the cloud-init profile to switch to booting with
security=apparmor.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
There is no other use of this yaml fragment in the project so inline it
for simplicity.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
The "only" feature has been deprecated for a while. The standard
replacement is the rules:if feature.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
This makes the snapd/mount-control test pass on all the currently tested systems. Note that there's a somewhat complex problem with the new mount APIs (https://lwn.net/Articles/753473/) from 2018 that are now being used on, for example, Debian 13.
I will need to make similar changes to the profiles generated by snapd, so any insight on what to do there is strongly appreciated.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1479
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
In aa-notify, notifications are now merged by default to reduce the risk
of flooding.
Additionally, we now use an exponential backoff algorithm for the
merging time period. If there is several notications within a time
period, it doubles, up to a maximum. The time period shrinks if there is
no notification. The time period is reset if the user clicks on a
notifiation
Signed-off-by: Maxime Bélair <maxime.belair@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1468
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
lastlog2 is the 2038-safe replacement for wtmp, and in the meantime
became part of util-linux.
This commit switches from trying to parse the lastlog2 output to
directly reading lastlog2.db with sqlite3.
Adjust get_last_login_timestamp() to use the lastlog2 database
(/var/lib/lastlog/lastlog2.db) if it exists, and adjust
get_last_login_timestamp_lastlog2() to actually do that.
(If lastlog2.db doesn't exist, aa-notify will read wtmp as usual.)
Unfortunately lastlog2 doesn't have a way to get machine-readable output
(for example json), therefore - after trying and failing to parse the
lastlog2 output - directly read from lastlog2.db. Let's hope the format
never changes ;-)
Fixes: https://bugzilla.opensuse.org/show_bug.cgi?id=1228378
Fixes: https://bugzilla.opensuse.org/show_bug.cgi?id=1216660
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/372
lastlog2 is the 2038-safe replacement for wtmp, and in the meantime
became part of util-linux.
Adjust get_last_login_timestamp() to use lastlog2 if it exists, and add
get_last_login_timestamp_lastlog2() to actually do that.
(If lastlog2 doesn't exist, aa-notify will read wtmp as usual.)
Unfortunately lastlog2 doesn't have a way to get machine-readable output
(for example json), therefore we have to parse the output that is meant
for humans. Let's hope the format never changes ;-)
(The alternative would have been to use squlite3 to once more read the
data behind the official program's back, but that was already a bad idea
for wtmp, therefore I decided against it.)
Fixes: https://bugzilla.opensuse.org/show_bug.cgi?id=1228378
Fixes: https://bugzilla.opensuse.org/show_bug.cgi?id=1216660
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/372
... and add a wrapper function with the old name
Also rename the tests to the new name, and create a copy with the
original name. The copy will be adjusted to also check/expect lastlog2
results in a later commit.
Add a basic overview of the ordering of the backend of the compiler
and which stages specific dump info lines up with.
Signed-off-by: John Johansen <john.johansen@canonical.com>
The BASH_XTRACEFD variable can be used to redirect "set -x" traces
to a dedicated file. We can use it to split the execution trace
(what has actually happened) from the failure messages.
On a failing test this does provide improved clarity when debugging
interactively with "spread -debug". On non-interactive runs the now
shorter error list is also implicitly printed.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1481
Approved-by: Christian Boltz <apparmor@cboltz.de>
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: Christian Boltz <apparmor@cboltz.de>
The BASH_XTRACEFD variable can be used to redirect "set -x" traces
to a dedicated file. We can use it to split the execution trace
(what has actually happened) from the failure messages.
On a failing test this does provide improved clarity when debugging
interactively with "spread -debug". On non-interactive runs the now
shorter error list is also implicitly printed.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
The package is required by the file_unbindable_mount regression test.
To properly re-generate affected images please update image-garden
to version containing 9714dc45d0ef06862ffe7037193dc43386db48ea
(Tie .user-data and .meta-data to MAKEFILE_LIST).
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
In addition allow linking to libeconf, generalize locale paths to cover
values other than C.UTF-8 and allow reading system-wide locale.alias and
gconv modules.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
This is not the best of fixes but it seems that on Debian 13, with new
libmount calling fsopen/fsconfig/move_mount, the current apparmor mount
rule is insufficient to allow the call to go through.
The key problems are:
- the fstype is not visible to LSM
- the source directory is an empty string
- the mount is moved to final position
I don't know the extent of "new" mount API coverage by LSM hooks but
I think we should either synthesize new permissions from old rules,
.e.g match each of the system calls against what the mount class
expression, or somehow allow the exceptions better.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
Construction of the chfa can reorder states from what the numbering
given during the hfa constuctions because of reordering for better
compression, dead state removal to ensure better packing etc.
This however means the dfa dump is difficult (it is possible using
multiple dumpes) to match up to the chfa that the kernel is
using. Make this easier by making the dfa dump be able to take
the remapping as input, and provide an option to dump the
chfa equivalent hfa.
Renumbered states will show up as {new <== {orig}} in the dump
Eg.
```
--D dfa-states
{1} <== priority (allow/deny/prompt/audit/quiet)
{5} 0 (0x 4/0//0/0/0)
{1} perms: none
0x2 -> {5} 0 (0x 4/0//0/0/0)
0x4 -> {5} 0 (0x 4/0//0/0/0)
\a 0x7 -> {5} 0 (0x 4/0//0/0/0)
\t 0x9 -> {5} 0 (0x 4/0//0/0/0)
\n 0xa -> {5} 0 (0x 4/0//0/0/0)
\ 0x20 -> {5} 0 (0x 4/0//0/0/0)
4 0x34 -> {3}
{3} perms: none
0x0 -> {6}
{6} perms: none
1 0x31 -> {5} 0 (0x 4/0//0/0/0)
```
```
-D dfa-compressed-states
{1} <== priority (allow/deny/prompt/audit/quiet)
{2 == {5}} 0 (0x 4/0//0/0/0)
{1} perms: none
0x2 -> {2 == {5}} 0 (0x 4/0//0/0/0)
0x4 -> {2 == {5}} 0 (0x 4/0//0/0/0)
\a 0x7 -> {2 == {5}} 0 (0x 4/0//0/0/0)
\t 0x9 -> {2 == {5}} 0 (0x 4/0//0/0/0)
\n 0xa -> {2 == {5}} 0 (0x 4/0//0/0/0)
\ 0x20 -> {2 == {5}} 0 (0x 4/0//0/0/0)
4 0x34 -> {3}
{3} perms: none
0x0 -> {4 == {6}}
{4 == {6}} perms: none
1 0x31 -> {2 == {5}} 0 (0x 4/0//0/0/0)
```
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1474
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: John Johansen <john@jjmx.net>
I had this message in my log
```
Dez 30 08:14:46 kernel: audit: type=1400 audit(1735542886.787:307): apparmor="DENIED" operation="open" class="file" profile="/usr/sbin/cupsd" name="/etc/paperspecs" pid=317509 comm="cupsd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
```
If the second commit is bad, I can drop it.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1472
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Construction of the chfa can reorder states from what the numbering
given during the hfa constuctions because of reordering for better
compression, dead state removal to ensure better packing etc.
This however means the dfa dump is difficult (it is possible using
multiple dumpes) to match up to the chfa that the kernel is
using. Make this easier by making the dfa dump be able to take the
emapping as input, and provide an option to dump the chfa equivalent
hfa.
Renumbered states will show up as {new <== {orig}} in the dump
Eg.
--D dfa-states
{1} <== priority (allow/deny/prompt/audit/quiet)
{5} 0 (0x 4/0//0/0/0)
{1} perms: none
0x2 -> {5} 0 (0x 4/0//0/0/0)
0x4 -> {5} 0 (0x 4/0//0/0/0)
\a 0x7 -> {5} 0 (0x 4/0//0/0/0)
\t 0x9 -> {5} 0 (0x 4/0//0/0/0)
\n 0xa -> {5} 0 (0x 4/0//0/0/0)
\ 0x20 -> {5} 0 (0x 4/0//0/0/0)
4 0x34 -> {3}
{3} perms: none
0x0 -> {6}
{6} perms: none
1 0x31 -> {5} 0 (0x 4/0//0/0/0)
-D dfa-compressed-states
{1} <== priority (allow/deny/prompt/audit/quiet)
{2 == {5}} 0 (0x 4/0//0/0/0)
{1} perms: none
0x2 -> {2 == {5}} 0 (0x 4/0//0/0/0)
0x4 -> {2 == {5}} 0 (0x 4/0//0/0/0)
\a 0x7 -> {2 == {5}} 0 (0x 4/0//0/0/0)
\t 0x9 -> {2 == {5}} 0 (0x 4/0//0/0/0)
\n 0xa -> {2 == {5}} 0 (0x 4/0//0/0/0)
\ 0x20 -> {2 == {5}} 0 (0x 4/0//0/0/0)
4 0x34 -> {3}
{3} perms: none
0x0 -> {4 == {6}}
{4 == {6}} perms: none
1 0x31 -> {2 == {5}} 0 (0x 4/0//0/0/0)
Signed-off-by: John Johansen <john.johansen@canonical.com>
Currently states are added to the reachable set when they are popped
from the workqueue. This however can result in states being
added to the work queue multiple times and reprocessed.
```
Eg. If state 2 has the transitions, and 9 is not in the reachable set
a -> 9
b -> 9
c -> 9
d -> 9
e -> 3
```
then 9 will get pushed onto the work 4 times. Even worse other states
on the workqueue may also add state 9 to the workqueue because it has
not been added to the reachable set.
Instead add states to the reachable set when they are added to the
workqueue. The first encounter with a state will result in it being
reachable and all other encounters will see that it already in the set
and not add it to the workqueue.
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1473
Acked-by: seth.arnold@gmail.com
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Currently states are added to the reachable set when they are popped
from the workqueue. This however can result in states being
added to the work queue multiple times and reprocessed.
Eg. If state 2 has the transitions, and 9 is not in the reachable set
a -> 9
b -> 9
c -> 9
d -> 9
e -> 3
then 9 will get pushed onto the work 4 times. Even worse other states
on the workqueue may also add state 9 to the workqueue because it has
not been added to the reachable set.
Instead add states to the reachable set when they are added to the
workqueue. The first encounter with a state will result in it being
reachable and all other encounters will see that it already in the set
and not add it to the workqueue.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Gtk applications like Firefox request write access to the file
`/run/user/1000/dconf/user`. The code in `dconf_shm_open` opens the file
with `O_RDWR | O_CREAT`.
4057f8c84f/shm/dconf-shm.c (L68)
Fix priority for file rules, and the ability to dump the dfa at different stages, and update and fix the equality tests.
This in particular adds the ability to better debug the equality tests. Instead of just piping the parser output into the hash it creates a tmp dir and drops the binary files there so they can be manually examined. It adds new options particularly the -r option making so the tests will exit on first failure to make it easier to isolate and examine a failure.
Eg.
```
./equality.sh -r -d -v
Equality Tests:
................................................................................................................................................................................................................................
Binary inequality 'priority=-1'x'priority=-1' change_hat rules automatically inserted
FAIL: Hash values match
parser: ./../apparmor_parser -QKSq --features-file=./features_files/features.all
known-good (ee4f926922ecd341f1389a79dd155879) == profile-under-test (ee4f926922ecd341f1389a79dd155879) for the following profiles:
known-good /t { priority=-1 owner /proc/[0-9]*/attr/{apparmor/,}current a, ^test { priority=-1 owner /proc/[0-9]*/attr/{apparmor/,}current a, /f r, }}
profile-under-test /t { priority=-1 owner /proc/[0-9]*/attr/{apparmor/,}current w, ^test { priority=-1 owner /proc/[0-9]*/attr/{apparmor/,}current w, /f r, }}
files retained in "/tmp/eq.3240859-deHu10/"
```
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1455
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
There is a general industry wide effort to move off of md5 and even
sha1 (see recent kernel changes). While in this particular use case it
doesn't make a difference (besides slightly lowering the chance of a
collision) switch to sha256sum to make sure our code doesn't depend on
tools that are deprecated and there is an effort to remove.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Similar to the deny x permission tests, the tests that test carving
out r permissions need to be updated to be conditional on what
priority is being used on the rule.
Signed-off-by: John Johansen <john.johansen@canonical.com>
With priority rules, deny does not carve out permissions from the
higher priority rule. Technically it doesn't from lower priority either
as it completely overrides them, but that case already results in
an inequality so does not cause the tests to fail.
Signed-off-by: John Johansen <john.johansen@canonical.com>
cx rules using a specified profile transition, may be emulated by
using px and a hierarchical profile name. That is
cx -> b
may be transformed into
px -> profile//b
which will generate an xtable entry of
profile//b
which means the previous patch using
pivot_root -> b,
to reliably add b to the xtable will not cover this case.
transition to using two pivot_root rules to provide the xtable entries
pivot_root /a -> b,
pivot_root /c -> /t//b,
the paths /a and /c are irrelavent as long as they don't have an
overlap with the generic globbing expression in the test, Two table
entries will be generated. We guarantee no overlap by converting the
/** to /f**
Also the xtable reserving rules are moved to the end of the profile so
the table order can be reliably created. A follow on MR around xtable
improvements should add reliability to xtable order.
Signed-off-by: John Johansen <john.johansen@canonical.com>
exec rules that specify an specific target profile generate an entry
in the xtable. The test entries containing " -> b" are an example of
this.
Currently the parser allocates the xtable entry before priorities are
applied in the backend, or minimization is done. Further more the
parser does not ref count the xtable entry to know what it is no
longer referenced.
The equality tests generate rules that are designed to completely
override and remove a lower priority rule, and remove it. Eg.
/t { priority=1 /* ux, /f px -> b, }
and then compares the generated profile to the functionaly equivalent
profile eg.
/t { priority=1 /* ux, }
To verify the overridden rule has been completely removed.
Unfortunately the compilation is not removing the unused xtable entry
for the specified transition, causing the equality comparison to fail.
Ideally the parser should be fixed so unused xtable entries are removed,
but that should be done in a different MR, and have its own test.
To fix the current tests, and another rule that adds an xtable entry
to the same target that can not be overriden by the x rule using
pivot_root. The parser will dedup the xtable entry resulting in the
known and test profile both having the same xtable. So the test will
pass and meet the original goal of verifying the x rule being overriden
and eliminated.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Failed equality tests can be hard to debug. The profiles aren't always
enough to figure out what is going on. Add several options that will
help in debugging, and developing new tests.
Add switches and arg parsing.
Add the ability to run tests individually
Add a -r flag to allow retaining the test and output
similar to the regression tests, so the exact output from the
tests can be examined.
Add a -d flag to dump dfa build information.
Allow overriding the parser, features, and description for a given
test run.
Signed-off-by: John Johansen <john.johansen@canonical.com>
printf of failure/error info should be going to stderr. Unfortunately
the test has a mix of 2>&1 and 1>&2. Having a mix is just wrong, we
could standardize on either but since the info is error info 1>&2
seems to be the better choice.
Signed-off-by: John Johansen <john.johansen@canonical.com>
The test was passing because the file priority was always zero bug
resulting in the priority rule always being correctly combined
with the specific match x rule, instead of overriding it.
Signed-off-by: John Johansen <john.johansen@canonical.com>
The test was passing because the file priority always being zero bug,
the supplied rule always had the same priority as the implied
rule. Resulting in binary_equality always passing even though the
specified priority should have resulted in a failure.
Fix this by checking if the priorities are equal to the implied
rule other wise it should result in an inequality.
Signed-off-by: John Johansen <john.johansen@canonical.com>
When there is a failure output the exact call info used to invoke the
parser. To facilitate manually recreating the test.
Signed-off-by: John Johansen <john.johansen@canonical.com>
With the file priority fix the xequality (expected equal but known
failure) tests are now passing. So convert them to regular equality
tests.
Signed-off-by: John Johansen <john.johansen@canonical.com>
The dfa goes through several stages during the build. Allow dumping it
at the various stages instead of only at the end.
Signed-off-by: John Johansen <john.johansen@canonical.com>
File rules could drop priority info when rule matched a rule
that was the same except for having different priority. For now
fix this by treating them as a different rule.
The priority was also be dropped when add_prefix was used to
add the priority during the parse resulting in file rules always
getting a default priority of 0.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Depending on the system, copying echo to the loop device fails because the echo binary is too large.
Especially on systems that have echo be just a symlink to coreutils (e.g. busybox) (as opposed to echo being its own binary) 16k is just not enough.
2M seems fine on my system, but this might need yet a higher value depending on what coreutils other people actually run.
The crash in question:
```
cp: error writing '/tmp/sdtest.3937422-31490-Bxvi6g/mount_target/echo': No space left on device
Fatal Error (file_unbindable_mount): Unexpected shell error. Run with -x to debug
rm: cannot remove '/tmp/sdtest.3937422-31490-Bxvi6g/mount_target': Device or resource busy
```
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1469
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Depending on the system, copying echo to the loop device fails because the echo binary is too large.
Especially on systems that have echo be just a symlink to coreutils (e.g. busybox) 16k is just not enough.
2M seems fine on my system, but this might need yet a higher value depending on what coreutils other people actually run.
The actual loop device needs to be larger to properly fit the allocated file size. Testing shows 4M is sufficient, but this is basically arbitrary.
- previously, aa-status --json --show profiles would return non-standard json
- adding the --pretty flag would crash completely
- closes#470
Things done:
- removed trailing ", " in json generation
- generate json seperator (", ") for each new json field
(profiles/processes) after the header if json is enabled
Tested on NixOS and apparmor 4.0.3 base, but should work on any version the patch applies on.
Closes#470
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1451
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
This MR is meant to resolve warnings such as "Warning: execname '/home/username/Documents/apparmor/tests/regression/apparmor/file_unbindable_mount': no such file or directory" when running tests like the one in the current version of !1448.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1450
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Starting with Python 3.8, you can use the PYTHONPYCACHEPREFIX environment
variable to define a cache directory for Python [1]. I think most people would set
this dir to @{HOME}/.cache/python/ , so the python abstraction should allow
writing to this location.
[1]: https://docs.python.org/3/using/cmdline.html#envvar-PYTHONPYCACHEPREFIX
TL;DR: Replace `aa[profile][hat]` with `active_profiles['profile//hat']` as a preparation to get rid of `aa`'s limits, especially to enable handling nested childs.
Since this is an extremely shortened summary, I recommend to check the individual commits for a readable and understandable diff and more details.
Note that this MR is "just" a preparation - nested childs are not supported yet. Also, `include` still uses the old structure. Both will be separate MRs - this one is already big enough ;-)
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1360
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: Georgia Garcia <georgia.garcia@canonical.com>
Note that the old code assigned dummy_prof to aa[profile][hat] and
active_profiles[profile] (= the main/parent profile) - which is
diffferent when testing a log for a child profile.
aa[profile][hat] was the wrong place - but since we used exactly that
again when checking for added exec rules, this error was hidden.
Now that the test is switched to using active_profiles, only check the
main profile for exec rules added by ask_exec(). (This will need to be
adjusted when we add a test for exec rules/events in nested childs, but
not earlier ;-)
This is mostly a search-and-replace patch.
In most cases, that means replacing `aa[profile][hat]` with
`active_profiles[full_profile]`.
In cases where the main/parent profile is meant, switch from
`aa[profile][profile]` to `active_profiles[profile]`.
Checks like `p in apparmor.aa` that check if a (main) profile exists
become `active_profiles.profile_exists(p)`.
write_profile() gets changed to loop over
`active_profiles.get_profile_and_childs()` which makes the code simpler.
`split_to_merged(aa)` becomes just `active_profiles`.
The only change that is not search-and-replace style is in
write_piece(). It expects a dict (not a ProfileList), therefore adjust
serialize_profile() so that it always hands over a dict.
This also changes the internal structure - instead of the nested dict
original_aa[profile][hat], we now have a ProfileList original_profiles[profile//hat].
Drop `comment.replace('\\n', '\n')` because that doesn't make sense and
doesn't change anything - not even a comment that contains the literal
string '\n' (backslash + letter n).
Besides that, get rid of the 'string' variable and store everything in
'data'.
... including just-created child profiles and hats.
Also ensure that serialize_profile() doesn't print them out as child
profiles AND external hats.
This commit includes a bugfix for a rare corner case:
Since create_new_profile() can return more than one profile if the
program has required_hats, add all of them to active_profiles.
(aa only got the expected profile added, but not the required_hats.)
... and make it non-optional
Note that read_profile() in aa.py skips child profiles and hats,
therefore active_profiles for now only contains the main profiles.
While the mount syscall documentation disallows this, the kernel silently
ignores make-* flags when doing a remount, and real applications were
passing this conflicting set of flags. Because changing the kernel to
reject this combination would break userspace, we should allow them
instead.
For an example: see https://bugs.launchpad.net/apparmor/+bug/2091424.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
The previous code would concatenate all of them together without spacing.
While dump_flags and the corresponding operator<< function aren't currently used,
this will help for when dump_flags is used to debug parser problems.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Swap on ZFS is *weird*. Getting it working needs some special casing, see e.g. https://askubuntu.com/questions/1198903/can-not-use-swap-file-on-zfs-files-with-holes
Currently, the swap regression test fails on my system (with /tmp in zfs):
```bash
tests/regression/apparmor ❯ ./swap.sh
Error: swap failed. Test 'SWAPON (unconfined)' was expected to 'pass'. Reason for failure 'FAIL: swapon /tmp/sdtest.872368-19048-kN4FN2/swapfile failed - Invalid argument'
Error: swap failed. Test 'SWAPOFF (unconfined)' was expected to 'pass'. Reason for failure 'FAIL: swapoff /tmp/sdtest.872368-19048-kN4FN2/swapfile failed - Invalid argument'
swapon: /tmp/sdtest.872368-19048-kN4FN2/swapfile: skipping - it appears to have holes.
Fatal Error (swap): Unexpected shell error. Run with -x to debug
```
However, just doing a file mount does make the test work on zfs, similar to how it is done with tmpfs. This means we don't need any special-casing for zfs beyond what is already there for working around (similar) tmpfs limitations.
Also, while researching this, it is possible a similar patch is needed for btrfs, but i currently don't have an easy way to test that.
This is non-breaking for anyone *not* using zfs, and it is currently broken with zfs anyways.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1462
Approved-by: Ryan Lee <rlee287@yahoo.com>
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: Georgia Garcia <georgia.garcia@canonical.com>
Instead of denying everything here, enumerate just the bits that are required
and also deny access to display devices since that is not actually needed by
rygel itself.
Signed-off-by: Alex Murray <alex.murray@canonical.com>
mx-extract also uses these parts of gstreamer so allow it as well as for the
main rygel profile.
Signed-off-by: Alex Murray <alex.murray@canonical.com>
previously, this check would fail if the setuptools version would contain non-integers.
On my system, that is the case: `setuptools.__version__` is `'75.1.0.post0'`
I believe it is entirely fair to just check the relevant bits and refuse to continue if those can not be checked properly.
Having some extra slug on the version should not immediately cause issues (e.g. the `post0` here, or slugs like `beta`, `alpha` and the likes).
Probably only very few systems are running setuptools with weird version info, but supporting this is a simple one-line change i figured i might as well MR.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1460
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: Christian Boltz <apparmor@cboltz.de>
previously, this check would fail if the setuptools version would contain non-integers.
On my system, that is the case: `setuptools.__version__` is `'75.1.0.post0'`
I believe it is entirely fair to just check the relevant bits and refuse to continue if those can not be checked properly.
But haviong something extra on the version should not immediately cause issues (e.g. the `post0` here, or slugs like `beta`, `alpha` and the likes).
Probably only very few systems are running setuptools with weird version info, but supporting this doesn't cost much, i believe.
This is neeed for "inherit owner = yes" in smb.conf.
From man smb.conf:
inherit owner (S)
The ownership of new files and directories is normally governed by
effective uid of the connected user. This option allows the Samba
administrator to specify that the ownership for new files and
directories should be controlled by the ownership of the parent
directory.
Fixes: https://bugzilla.suse.com/show_bug.cgi?id=1234327
I propose this fix for 3.x, 4.x and master.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1456
Approved-by: Ryan Lee <rlee287@yahoo.com>
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
MS_SYNC is a flag for msync(2) while MS_SYNCHRONOUS is a flag for mount(2).
The header used to define MS_SYNC but IMO this is confusing since that's an
unrelated flag.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
This allows access to the freedesktop.org mime info amongst others which is
needed for rygel mx-extract to index files etc.
Signed-off-by: Alex Murray <alex.murray@canonical.com>
By placing a bzImage into the top level of the AppArmor git repository one can
instruct spread and image-garden to use that image instead of booting
traditionally with an EFI / full disk image pair.
In addition, make error handling in qemu more robust, so failures are both
surfaced and do not cause endless attempts to allocate.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1452
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
By placing a bzImage into the top level of the AppArmor git repository one can
instruct spread and image-garden to use that image instead of booting
traditionally with an EFI / full disk image pair.
In addition, make error handling in qemu more robust, so failures are both
surfaced and do not cause endless attempts to allocate.
Please update image-garden to at least 5a00ead9964df6463e19432ae50e7760fc6da755
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
This is neeed for "inherit owner = yes" in smb.conf.
From man smb.conf:
inherit owner (S)
The ownership of new files and directories is normally governed by
effective uid of the connected user. This option allows the Samba
administrator to specify that the ownership for new files and
directories should be controlled by the ownership of the parent
directory.
Fixes: https://bugzilla.suse.com/show_bug.cgi?id=1234327
When settest was called with two parameters, one for the test name and
the other for the test wrapper/binary, the profile created with
genprofile would show the test name, causing an error if the file
didn't exist.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Some of the tests using the --stdin option of mkprofile.pl are adding
more than one profile at a time. Whenever a profile is created in the
test, its name is added to the file profile.names so the test
infrastructure can tell if the profile is loaded or removed when
appropriately. The issue is that the name of the second profile
created by --stdin is not added, so these checks are not applied.
This patch adds the option of appending a second profile (not rules).
The option --append was used instead of a short -A because the short
options are arguments of mkprofile.pl, which --append is not.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
The test adds a very small and simple smoke test that shows that a mount rule
with both fstype and options allows mounts to be performed on a real running
kernel.
The test is structured in a way that should make it easy to extend with new
variants (flags, fstype) in the future.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
- previously, aa-status --json --show profiles would return non-standard json
- adding the --pretty flag would crash completely
- closes#470
Things done:
- removed trailing ", " in json generation
- generate json seperator (", ") for each new json field
(profiles/processes) after the header if json is enabled
Tested on NixOS and apparmor 4.0.3 base, but should work on any version the patch applies on.
It turns out we need to allow /dev/null for fd inheritance and /dev for reading
plus /dev/urandom, all of which are quite safe.
Signed-off-by: Alex Murray <alex.murray@canonical.com>
Due to how the tests were implemented in the past, permissions could
be passed along with the image name, and the permission part would be
discarded. The issue is that permissions are usually separated by ':',
but namespaces also contain ':', which would cause a conflict.
Since permissions are no longer passed as part of the image name,
remove that description so profile names in namespaces can be
supported.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
This allows the use of sparse allocation on filesystems that support it,
allowing a fallback when the underlying filesystem doesn't.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Calling losetup -f first and passing its result to create the loop device
creates a race condition in which the loop device might be claimed first
in between the two losetup calls. Instead, create the device atomically
and then obtain the loop device /dev/ handle afterwards.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Spread is a full-system, or integration test suite runner initially developed
to test snapd. Over time it has spread to other projects where it provides a
structured way to organize, run and debug complex full-system interactions.
Spread is documented on https://github.com/canonical/spread and is used in
production since late 2016.
Spread has a notion of backends which are responsible for allocating and
discarding test machines. For the purpose of running AppArmor regression tests,
I've combined spread with my own tool, image garden. The tool provides
off-the-shelf images, constructed on-the-fly from freely available images, and
makes them easily available to spread.
The reason for doing it this way is so that using non-free cloud systems is not
required and anyone can repeat the test process locally, on their own computer.
Vanilla spread is somewhat limited to x86-64 systems but the way I've used it
here makes it equally possible to test x86_64 *and* aarch64 systems. I've done
most of the development on an ARM single-board-computer running on my desk.
Spread requires a top-level spread.yaml file and a collection of task.yaml
files that describe individual tasks (for us, those are just tests). Tasks have
no implied dependency except that to reach a given task, spread will run all
the _prepare_ statements leading to that task, starting from the project, test
suite and then task. With proper care one can then run a specific individual
test with a one-line command, for example:
```
spread -v garden:ubuntu-cloud-24.04:tests/regression/apparmor:at_secure
```
This will prepare a fresh ubuntu-cloud-24.04 system (matching the CPU
architecture of the host), copy the project tree into the test machine, install
all the build dependencies, build all the parts of apparmor and then run one
specific variant of the regression test, namely the at_secure program.
Importantly the same test can also run on, say debian-cloud-13 (Debian Trixie),
but also, if you have a Google cloud account, on Google Compute Engine or in
one of the other backends either built into spread or available as a fork of
spread or as a helper for ad-hoc backend. Spread can also create more than one
worker per system and distribute the tests to all of the available instances.
In no way are we locking ourselves out of the ability to run our test suite on
our target of choice.
Spread has other useful switches, such as:
- `-reuse` for keeping machines around until discarded with -discard
- `-resend` for re-sending updated copy of the project (useful for -reuse)
- `-debug` for starting an interactive shell on any failure
- `-shell` for starting an interactive shell instead of the `execute` phase
This first patch contains just the spread elements, assuming that both spread
and image-garden are externally installed. A GitLab continuous integration
installing everything required and running a subset of tests will follow
shortly.
I've expanded the initial selection of systems to allow running all the tests
on several versions of Ubuntu, Debian and openSUSE, mainly as a sanity check
but also to showcase how practical spread is at covering real-world systems.
A number of tests are currently failing:
- garden:debian-cloud-12:tests/regression/apparmor:attach_disconnected
- garden:debian-cloud-12:tests/regression/apparmor:deleted
- garden:debian-cloud-12:tests/regression/apparmor:unix_fd_server
- garden:debian-cloud-12:tests/regression/apparmor:unix_socket_pathname
- garden:debian-cloud-13:tests/regression/apparmor:attach_disconnected
- garden:debian-cloud-13:tests/regression/apparmor:deleted
- garden:debian-cloud-13:tests/regression/apparmor:unix_fd_server
- garden:debian-cloud-13:tests/regression/apparmor:unix_socket_pathname
- garden:opensuse-cloud-15.6:tests/regression/apparmor:attach_disconnected
- garden:opensuse-cloud-15.6:tests/regression/apparmor:deleted
- garden:opensuse-cloud-15.6:tests/regression/apparmor:e2e
- garden:opensuse-cloud-15.6:tests/regression/apparmor:unix_fd_server
- garden:opensuse-cloud-15.6:tests/regression/apparmor:unix_socket_pathname
- garden:opensuse-cloud-15.6:tests/regression/apparmor:xattrs_profile
In addition, only on openSUSE, I've skipped the entire test suite of the utils
directory, as it requires python3 ttk themes, which I cannot find in packaged
form.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1432
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: Georgia Garcia <georgia.garcia@canonical.com>
It's no longer in python standard library starting
at version 3.13. Fixes:
root@qemuarm64:~# aa-complain /etc/apparmor.d/*
Traceback (most recent call last):
File "/usr/sbin/aa-complain", line 18, in <module>
from apparmor.fail import enable_aa_exception_handler
File "/usr/lib/python3.13/site-packages/apparmor/fail.py", line 12, in <module>
import cgitb
ModuleNotFoundError: No module named 'cgitb'
Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Tests #466 but is marked as expected fail due to that bug not being resolved.
Depends on !1441 which adds the xfail infrastructure to the parser equality testing framework, and should be rebased on top of master once that MR is merged.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1443
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
- Tests defined in utils/test are now described by a task.yaml in the same
directory and can run concurrently across many machines.
- Tests for utils/ are now executed on openSUSE Tumbleweed since ttk themes is
no longer a hard dependency in master.
- Tests no longer run on openSUSE Leap 15.6 due to the age of default
Python (3.6) and gcc/g++. The tight integration with SWIG which does
not seem to support other Python versions very well. Perl hard-codes
old GCC for extension modules. The upcoming openSUSE Leap 16 should be
a viable target. In the meantime we can still test everything through
rolling-release Tumbleweed.
- Formatting of YAML files is now more uniform, at four spaces per tab.
- The run-spread.sh script is now in the root of the tree. The script allows
running all spread tests sequentially on one system, while collecting logs
and artifacts for convenient analysis after the fact.
- All systems are adjusted to run _four_ workers in parallel with _two_ virtual
cores each and equipped with 1.5GB of virtual memory. This aims to best
utilize the capacity of a typical CI worker with two to four cores and about
8GB of available memory.
- Failing tests are marked as such, so that as a whole the entire spread suite
can pass and be useful at catching regressions.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
Compared to v1 the following improvements have been made:
- The cost of installing packages have been shifted from each startup to image
preparation phase, thanks to the integration of custom cloud-init profiles
into image-garden. This has dramatic impact on iteration time while also
entirely removing requirement to be online to run once a prepared image is
available.
- Support for running on Google Compute Engine has been removed since it would
not be able to use cloud-init the same way would currently only complicate
setup.
- The number of workers have been tuned for local iteration, aiming for
comfortable work with 16GB of memory on the host. Once CI/CD pipeline
support is introduced I will add a dedicated entry so that resources are
utilized well both locally and when running in CI.
- The set of regression tests listed in tests/regression/apparmor/task.yaml is
now cross-checked so introduction of a new test to the makefile there is
automatically flagged and causes spread to fail with a clear message.
- The task tests/unit/utils has been improved to generate profiles. Thanks to
Christian Boltz for explaining this relationship between tests.
- A number of comments have been improved and cleaned up for readability,
accuracy and sometimes better grammar.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
Spread is a full-system, or integration test suite runner initially developed
to test snapd. Over time it has spread to other projects where it provides a
structured way to organize, run and debug complex full-system interactions.
Spread is documented on https://github.com/canonical/spread and is used in
production since late 2016.
Spread has a notion of backends which are responsible for allocating and
discarding test machines. For the purpose of running AppArmor regression tests,
I've combined spread with my own tool, image garden. The tool provides
off-the-shelf images, constructed on-the-fly from freely available images, and
makes them easily available to spread.
The reason for doing it this way is so that using non-free cloud systems is not
required and anyone can repeat the test process locally, on their own computer.
Vanilla spread is somewhat limited to x86-64 systems but the way I've used it
here makes it equally possible to test x86_64 *and* aarch64 systems. I've done
most of the development on an ARM single-board-computer running on my desk.
Spread requires a top-level spread.yaml file and a collection of task.yaml
files that describe individual tasks (for us, those are just tests). Tasks have
no implied dependency except that to reach a given task, spread will run all
the _prepare_ statements leading to that task, starting from the project, test
suite and then task. With proper care one can then run a specific individual
test with a one-line command, for example:
```
spread -v garden:ubuntu-cloud-24.04:tests/regression/apparmor:at_secure
```
This will prepare a fresh ubuntu-cloud-24.04 system (matching the CPU
architecture of the host), copy the project tree into the test machine, install
all the build dependencies, build all the parts of apparmor and then run one
specific variant of the regression test, namely the at_secure program.
Importantly the same test can also run on, say debian-cloud-13 (Debian Trixie),
but also, if you have a Google cloud account, on Google Compute Engine or in
one of the other backends either built into spread or available as a fork of
spread or as a helper for ad-hoc backend. Spread can also create more than one
worker per system and distribute the tests to all of the available instances.
In no way are we locking ourselves out of the ability to run our test suite on
our target of choice.
Spread has other useful switches, such as:
- `-reuse` for keeping machines around until discarded with -discard
- `-resend` for re-sending updated copy of the project (useful for -reuse)
- `-debug` for starting an interactive shell on any failure
- `-shell` for starting an interactive shell instead of the `execute` phase
This first patch contains just the spread elements, assuming that both spread
and image-garden are externally installed. A GitLab continuous integration
installing everything required and running a subset of tests will follow
shortly.
I've expanded the initial selection of systems to allow running all the tests
on several versions of Ubuntu, Debian and openSUSE, mainly as a sanity check
but also to showcase how practical spread is at covering real-world systems.
A number of systems and tests are currently failing:
- garden:debian-cloud-12:tests/regression/apparmor:attach_disconnected
- garden:debian-cloud-12:tests/regression/apparmor:deleted
- garden:debian-cloud-12:tests/regression/apparmor:unix_fd_server
- garden:debian-cloud-12:tests/regression/apparmor:unix_socket_pathname
- garden:debian-cloud-13:tests/regression/apparmor:attach_disconnected
- garden:debian-cloud-13:tests/regression/apparmor:deleted
- garden:debian-cloud-13:tests/regression/apparmor:unix_fd_server
- garden:debian-cloud-13:tests/regression/apparmor:unix_socket_pathname
- garden:opensuse-cloud-15.6:tests/regression/apparmor:attach_disconnected
- garden:opensuse-cloud-15.6:tests/regression/apparmor:deleted
- garden:opensuse-cloud-15.6:tests/regression/apparmor:e2e
- garden:opensuse-cloud-15.6:tests/regression/apparmor:unix_fd_server
- garden:opensuse-cloud-15.6:tests/regression/apparmor:unix_socket_pathname
- garden:opensuse-cloud-15.6:tests/regression/apparmor:xattrs_profile
- garden:opensuse-cloud-tumbleweed:tests/regression/apparmor:attach_disconnected
- garden:opensuse-cloud-tumbleweed:tests/regression/apparmor:deleted
- garden:opensuse-cloud-tumbleweed:tests/regression/apparmor:unix_fd_server
- garden:opensuse-cloud-tumbleweed:tests/regression/apparmor:unix_socket_pathname
- garden:ubuntu-cloud-22.04:tests/regression/apparmor:attach_disconnected
In addition, only on openSUSE, I've skipped the entire test suite of the utils
directory, as it requires python3 ttk themes, which I cannot find in packaged
form.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
The new check-one-test-% pattern rule allows running individual test scripts.
This allows them to be tested in parallel across many Make worker threads or
across many distinct machines with spread.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
When the test name and test binary differed and genprofile was used, there would be an execname warning about the original expected binary not existing. This fixes that warning.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
currently the equality tests require the tests to PASS as known equality
or inequality. Add the ability to add tests that are a known problem
and are expected to fail the equality, or inequality test.
This is done by using
verify_binary_xequality
verify_binary_xinequality
This allows new tests to be added to document a known issue, without
having to develop the fix for the issue. The use of this facility
is expected to be temporary, so any test marked as xequality or
xinequality will be noisy but not fail the other tests until they
are fixed, at which point they will cause the tests to fail to
force them to be updated to the correct equality or inequality
test.
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1441
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
currently the equality tests require the tests to PASS as known equality
or inequality. Add the ability to add tests that are a known problem
and are expected to fail the equality, or inequality test.
This is done by using
verify_binary_xequality
verify_binary_xinequality
This allows new tests to be added to document a known issue, without
having to develop the fix for the issue. The use of this facility
is expected to be temporary, so any test marked as xequality or
xinequality will be noisy but not fail the other tests until they
are fixed, at which point they will cause the tests to fail to
force them to be updated to the correct equality or inequality
test.
Signed-off-by: John Johansen <john.johansen@canonical.com>
I am upstreaming this patch that is part of the nix package of apparmor for close to a year now.
This fixes the issue at https://github.com/NixOS/nixpkgs/issues/273164 for more distros than just NixOS.
The original merge Request on the nix side patching this was https://github.com/NixOS/nixpkgs/pull/285915.
However, people had issues with gitlab, so this never hit apparmor upstream until now. This does however also mean this patch has seen production and seems to work quite well.
## Original reasoning/message of the patch author:
This check is intended for ensuring that the profiles file can actually
be opened. The *actual* check is performed by the shell, not the read
utility, which won't even be executed if the input redirection (and
hence the test) fails.
If the test succeeds, though, using `read` here might actually
jeopardize the test result if there are no profiles loaded and the file
is empty.
This commit fixes that case by simply using `true` instead of `read`.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1438
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: Christian Boltz <apparmor@cboltz.de>
This check is intended for ensuring that the profiles file can actually
be opened. The *actual* check is performed by the shell, not the read
utility, which won't even be executed if the input redirection (and
hence the test) fails.
If the test succeeds, though, using `read` here might actually
jeopardize the test result if there are no profiles loaded and the file
is empty.
This commit fixes that case by simply using `true` instead of `read`.
The regression test suite uses root with capabilities restricted in
several tests. This can cause the test suite to fail in weird and
confusing ways.
Add a test to check for DAC permissiosns from / to the testsuite
and abort running the tests with an error message if DAC permissions
are going to cause the test suite to fail.
Currently the test is pretty basic, but is better than nothing.
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1411
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: John Johansen <john@jjmx.net>
Using this version of make:
```
GNU Make 4.2.1
Built for x86_64-suse-linux-gnu
```
I'm not entirely sure why but the alternative syntax I've used works correctly.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
This fixes the test to pass on openSUSE Tumbleweed, where the small size
prevented alloction of an inode for the `lost+found` directory:
```
garden:opensuse-cloud-tumbleweed .../tests/regression/apparmor# mkfs.ext2 -F -m 0 -N 10 /tmp/sdtest.32929-21402-6x826m/image.ext3
mke2fs 1.47.0 (5-Feb-2023)
Discarding device blocks: done
Creating filesystem with 512 1k blocks and 8 inodes
Allocating group tables: done
Writing inode tables: done
ext2fs_mkdir: Could not allocate inode in ext2 filesystem while creating /lost+found
```
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
This fixes an error with Python 3.11:
```
test/test-parser-simple-tests.py:420:21: E502 the backslash is redundant between brackets
```
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
Which is technically not POSIX and command -v works everywhere. This fixes
building and running the test suite on openSUSE Tumbleweed.
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
On a test system without bison installed, make setup fails with:
/bin/sh: 1: bison: not found
/bin/sh: 1: test: -ge: unexpected operator
Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
Because this is used in parsing profiles, we keep backwards compatibility by including
both names and mapping them to the same underlying signal number.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Because sig_names is only used to dump parsed signals for debugging purposes,
renaming SIGTSTP "stp" to "tstp" is not a breaking change.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Match Flags convert output to hex but don't restore after outputting
the flag resulting in following numbers being hex encoded. This
results in dumps that can be confusing eg.
rule: \d2 -> \x2 priority=1001 (0x4/0)< 0x4>
rule: \d7 -> \a priority=3e9 (0x4/0)< 0x4>
rule: \d10 -> \n priority=3e9 (0x4/0)< 0x4>
rule: \d9 -> \t priority=3e9 (0x4/0)< 0x4>
rule: \d14 -> \xe priority=1001 (0x4/0)< 0x4>
where priority=3e9 is the hex encoded priority 1001.
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1419
Approved-by: Maxime Bélair <maxime.belair@canonical.com>
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
The old code implicitly initialized it to 0 by overwriting a
zero-initialized array terminator. Now that we construct the new entry
from scratch, we need to do this manually.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Most `tests/regression/apparmor/*.sh` scripts contain
. $bin/prologue.inc
This will explode if one of the parent directories contains a space.
Minimized reproducer:
```
# cat test.sh
pwd=`dirname $0`
pwd=`cd $pwd ; /bin/pwd`
bin=$pwd
echo "pwd: $bin"
. $bin/prologue.inc
# ./test.sh
pwd: /tmp/foo bar
./test.sh: line 9: /tmp/foo: No such file or directory
```
Notice that test.sh tries to source `/tmp/foo` instead of `/tmp/foo bar/prologue.inc`.
The fix is to quote the prologue.inc path:
. "$bin/prologue.inc"
While on it, also fix other uses of $bin - directly and indirectly - by quoting them.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1418
Approved-by: Ryan Lee <rlee287@yahoo.com>
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Unfortunately, meaningfully parallelizing parser testing is a giant task:
- Parser equality testing is a shell script based framework where adding parallelism would be a major rework.
- Parser testing using Python’s unittest framework also needs a different test runner to enable parallelism.
- Parser testing using Perl’s prove framework already supports parallelism, but adding -j to Prove does not result in speedups. Thus, I suspect most of the overhead is in spawning the processes, and that speeding this part up will require making the parser a library and testing it that way.
The commit in this MR passes a `-j` parallelism flag to Perl's prove framework, but local testing has shown that this does not create speedups, and Gitlab CI has a very modest improvement of 11 minutes 16 seconds for the parser testing stage without `-j $(nproc)` vs 10 minutes 51 seconds with `-j $(nproc)`. Instead of passing `-j $(nproc)`, pass a fixed `-j 2` to gain some speedups, as the overhead of `-j $(nproc)` on a system with more than 2 cores eats up any time gains that parallelism would have brought.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1416
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
The regression test suite uses root with capabilities restricted in
several tests. This can cause the test suite to fail in weird and
confusing ways.
Add a test to check for DAC permissiosns from / to the testsuite
and abort running the tests with an error message if DAC permissions
are going to cause the test suite to fail.
Currently the test is pretty basic, but is better than nothing.
Signed-off-by: John Johansen <john.johansen@canonical.com>
This function was broken all this time: instead of duplicating each entry
in the list, it would duplicate the first entry n times. Since this
function is currently not used anywhere, delete it instead of fixing it.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
This is simple enough to fix even if weld_file_to_policy isn't used in practice
with the compat layer that uses it being a target for deletion
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
There is a null check before storing invflags into inv, but not before initializing the value at inv to 0.
Assuming the null check is needed, it should be there in both places.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Match Flags convert output to hex but don't restore after outputting
the flag resulting in following numbers being hex encoded. This
results in dumps that can be confusing eg.
rule: \d2 -> \x2 priority=1001 (0x4/0)< 0x4>
rule: \d7 -> \a priority=3e9 (0x4/0)< 0x4>
rule: \d10 -> \n priority=3e9 (0x4/0)< 0x4>
rule: \d9 -> \t priority=3e9 (0x4/0)< 0x4>
rule: \d14 -> \xe priority=1001 (0x4/0)< 0x4>
where priority=3e9 is the hex encoded priority 1001.
Signed-off-by: John Johansen <john.johansen@canonical.com>
The parser recently changed how/where deny information is applied.
commit 1fa45b7c1 ("parser: dfa minimization prepare for extended
permissions") removed the implicit filtering of explicit denies during
the minimization pass. The implicit clear allowed the explicit
information to be carried into the minimization pass and merged with
implicit denies. The end result being a minimized dfa with the explicit
deny information available to be applied post minimization, and
then dropped later at permission encoding in the accept entries.
Extended permission however enable carrying explicit deny information
into the kernel to fix certain bugs like complain mode not being
able to distinguish between implicit and explicit deny rules (ie.
deny rules get ignored in complain mode). However keeping explicit
deny information when unnecessary result in a larger state machine
than necessary and slower compiles.
commit 179c1c1ba ("parser: fix minimization check for filtering_deny")
Moved the explicit apply_and_clear_deny() pass to before minimization
to restore mnimization's ability to create a minimized dfa with
explicit and implicit deny information merged but this also cleared
the explicit deny information that used to be carried through
minimization. This meant that when the deny information was applied
post minimization it resulted in the audit and quiet information
being cleared.
This resulted in the query_label tests failing as they are checking
for the expected audit infomation in the permissions.
Fixes: 179c1c1ba ("parser: fix minimization check for filtering_deny")
Bug: https://gitlab.com/apparmor/apparmor/-/issues/461
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1408
Approved-by: Ryan Lee <rlee287@yahoo.com>
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
... to avoid issues with spaces in a parent directory's name.
"Indirect uses" means usage of $bin via another variable, for example
`foo=$bin/whatever`
Most `tests/regression/apparmor/*.sh` scripts contain
. $bin/prologue.inc
This will explode if one of the parent directories contains a space.
Minimized reproducer:
```
pwd=`dirname $0`
pwd=`cd $pwd ; /bin/pwd`
bin=$pwd
echo "pwd: $bin"
. $bin/prologue.inc
pwd: /tmp/foo bar
./test.sh: line 9: /tmp/foo: No such file or directory
```
Notice that test.sh tries to source `/tmp/foo` instead of `/tmp/foo bar/prologue.inc`.
The fix - as done in this commit - is to quote the prologue.inc path:
. "$bin/prologue.inc"
Builds for risc64 are much slower than on other architectures (4-5
seconds with qemu-user or on Litchi Pi 4A).
Since the timeout is only meant as a safety net, increase it generously,
and hopefully for the last time.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/463
Besides of transitioning towards C++ this also eliminates the linear scan search that the functions using these arrays did.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Because the main overhead of the parser_sanity test suite is process
spawning, parallelizing too much could end up hurting performance instead
of helping it. Thus, use a fixed value of 2 instead of $(nproc).
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
The mapping of AA_CONT_MATCH was being dropped resulting in the
tcp tests failing because they would only match up to the first conditional
match check in the layout.
Bug: https://gitlab.com/apparmor/apparmor/-/issues/462
Fixes: e29f5ce5f ("parser: if extended perms are supported by the kernel build a permstable")
Signed-off-by: John Johansen <john.johansen@canonical.com>
Instead of encoding permissions in the accept and accept2 tables
extended perms uses a permissions table and accept becomes an index
into the table.
Add the ability to dump the permissions table so that it can be
compared and debugged.
Signed-off-by: John Johansen <john.johansen@canonical.com>
The chfa dump is missing information about the accept2 entry. The
accept2 information is necessary to help with debugging state machine
builds as accept2 is used to store quiet and audit information in the
old format or conditional information in the extended perms format.
Signed-off-by: John Johansen <john.johansen@canonical.com>
The Makefile is missing some of its .h depenedncies causing compiles
to either fail or worse result in bad builds when rebuilding in an
already built tree.
Move the header dependencies into a variable and use it for each
target. While some targets don't need every include as a dependency
and this will result in unnecessary rebuilds in some cases, it makes
the Makefile cleaner, easier to maintain and makes sure a dependency
isn't accidentally missed.
Signed-off-by: John Johansen <john.johansen@canonical.com>
The parser recently changed how/where deny information is applied.
commit 1fa45b7c1 ("parser: dfa minimization prepare for extended
permissions") removed the implicit filtering of explicit denies during
the minimization pass. The implicit clear allowed the explicit
information to be carried into the minimization pass and merged with
implicit denies. The end result being a minimized dfa with the explicit
deny information available to be applied post minimization, and
then dropped later at permission encoding in the accept entries.
Extended permission however enable carrying explicit deny information
into the kernel to fix certain bugs like complain mode not being
able to distinguish between implicit and explicit deny rules (ie.
deny rules get ignored in complain mode). However keeping explicit
deny information when unnecessary result in a larger state machine
than necessary and slower compiles.
commit 179c1c1ba ("parser: fix minimization check for filtering_deny")
Moved the explicit apply_and_clear_deny() pass to before minimization
to restore mnimization's ability to create a minimized dfa with
explicit and implicit deny information merged but this also cleared
the explicit deny information that used to be carried through
minimization. This meant that when the deny information was applied
post minimization it resulted in the audit and quiet information
being cleared.
This resulted in the query_label tests failing as they are checking
for the expected audit infomation in the permissions.
Fixes: 179c1c1ba ("parser: fix minimization check for filtering_deny")
Bug: https://gitlab.com/apparmor/apparmor/-/issues/461
Signed-off-by: John Johansen <john.johansen@canonical.com>
The prefix can be done in higher-level languages via slicing and having an explicit length exposes an out-of-bounds memory read footgun to those higher level languages
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Surprisingly, SWIG did not pick up the "typedef int pid_t" from the C headers.
As such, we need to provide our own wrapper. We don't just replicate the typdef
because we still support systems that have 16-bit PIDs.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
I don't know when (or even: if) this function was in use. A quick look
at the git history of aa.py shows that the function was (blindly?)
updated a few times. However, I didn't find a commit that uses or stops
using profile_exists(), so maybe it was never used at all.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1404
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
If a user specifies a non-existing file to merge into the profiles
(`aa-mergeprof /file/not/found`), this results in a backtrace showing an
AppArmorBug because that file unsurprisingly doesn't end up in the
active_profiles filelist.
Handle this more gracefully by adding a read_error_fatal parameter to
read_profile() that, if set, forwards the exception. With that,
aa-mergeprof doesn't try to list the profiles in this non-existing file.
Note that all other callers of read_profile() continue to ignore read
errors, because aborting just because a single file in /etc/apparmor.d/
(for example a broken symlink) isn't readable would be a bad idea.
This bug was introduced in 4e09f315c3, therefore I propose this patch for 3.0..master
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1403
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
In Python, return status is signalled by exceptions (or lack thereof)
instead of int. Keep the typemap portable for any other languages we may
add in the future.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
This includes a custom typemap to handle (char **label, char **mode)
pairs and a cstring_output_allocate declaration for char **mnt.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
The only use of this _clone function passes in the same function that was
hardcoded, so this doesn't change any functionality.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Even if file descriptor values would not exercise the full range provided
by int, it doesn't hurt to allocate enough space for all ints.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
It is common for packaged PHP applications to ship a PHP-FPM
configuration using a scheme of "$app.sock" or or "$app.socket" instead
of using a generic FPM socket.
Signed-off-by: Georg Pfuetzenreuter <mail@georg-pfuetzenreuter.net>
I don't know when (or even: if) this function was in use. A quick look
at the git history of aa.py shows that the function was (blindly?)
updated a few times. However, I didn't find a commit that uses or stops
using profile_exists(), so maybe it was never used at all.
If a user specifies a non-existing file to merge into the profiles
(`aa-mergeprof /file/not/found`), this results in a backtrace showing an
AppArmorBug because that file unsurprisingly doesn't end up in the
active_profiles filelist.
Handle this more gracefully by adding a read_error_fatal parameter to
read_profile() that, if set, forwards the exception. With that,
aa-mergeprof doesn't try to list the profiles in this non-existing file.
Note that all other callers of read_profile() continue to ignore read
errors, because aborting just because a single file in /etc/apparmor.d/
(for example a broken symlink) isn't readable would be a bad idea.
ArchLinux ships a secondary PHP package called php-legacy with different
paths. As of now, the php-fpm profile will cover this binary but
inadequately restrict it.
Fixes: #454
Bash will try to read the passwd database to find the shell of a user if
$SHELL is not set. This causes zgrep to trigger
```
apparmor="DENIED" operation="open" class="file" profile="zgrep" name="/etc/nsswitch.conf" comm="zgrep" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
apparmor="DENIED" operation="open" class="file" profile="zgrep" name="/etc/passwd" comm="zgrep" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
```
if called in a sanitized environment. As the functionality of zgrep is
not impacted by a limited Bash environment, add deny rules to avoid the
potentially misleading AVC messages.
Signed-off-by: Georg Pfuetzenreuter <mail@georg-pfuetzenreuter.net>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1361
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Instead of always storing the name of the main profile, store the child
profile/hat name if we are in a child profile or hat.
As a result, we always get the correct "profile xy" header even for
child profiles when dumping the ProfileStorage object.
Also extend the tests to check that the name gets stored correctly.
.
Add aa-complain tests for profile with hats and subprofiles
So far, change_profile_flags() in aa.py is the only user of
ProfileStorage's 'name'.
Rewrite minitools test_cleanprof() so that most of its code can be
reused, and add a test that runs 'aa-complain
/usr/bin/a/simple/cleanprof/test/profile' on cleanprof.in to ensure
aa-complain still works as expected on subprofiles and hats.
Note: aa-complain $profilename will change the flags of hats, but not
child profiles. This is a known issue, and doesn't change with this MR.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1359
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Seen on various VMs, my guess is that bash wants to translate a uid to a
username.
Log events (slightly shortened)
apparmor="DENIED" operation="open" class="file" profile="zgrep" name="/etc/nsswitch.conf" comm="zgrep" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
apparmor="DENIED" operation="open" class="file" profile="zgrep" name="/etc/passwd" comm="zgrep" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
I propose this patch for 3.0..master
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1357
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
When the find fails but the insertion also fails, we leak the new node
that we generated. Delete the new node in this case to avoid leaking
memory.
The question remains, however, as to whether we should implement `operator==` in addition to `operator<` so that they are consistent with each other and `find` works correctly.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1399
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: John Johansen <john@jjmx.net>
When the find fails but the insertion also fails, we leak the new node
that we generated. Delete the new node in this case to avoid leaking
memory.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
commit 1fa45b7c1 ("parser: dfa minimization prepare for extended
permissions") removed implicit filtering of explicit denies in the
minimization pass (the information was ignored in building the set of
final accept states).
The filtering of explicit denies reduces the size of the produced
dfa. Since we need to be smarter about when explicit denies are
kept (eg. during complain mode), and most dfas are limited to 65k
states we currently need to filter explicit deny perms by default.
To compensate commit 2737cb2c2 ("parser: minimization - remove
unnecessary second minimization pass") moved the
apply_and_clear_deny() to before minimization. However its check to
apply removal denials before minimization is broken. Remove minimization
triggering apply_and_clear_deny() and just set the FILTER_DENY flag
by default, until we have better selection of rules/conditions where
explicit deny information should be carried through to the backend.
Fixes: 2737cb2c2 ("parser: minimization - remove unnecessary second minimization pass")
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1397
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: John Johansen <john@jjmx.net>
There is an integer overflow when comparing priorities when cmp is
used because it uses subtraction to find lessthan, equal, and greater
than in one operation.
But INT_MAX and INT_MIN are being used by priorities and this results
in INT_MAX - INT_MIN and INT_MIN - INT_MAX which are both overflows
causing an incorrect comparison result and selection of the wrong
rule permission.
Closes: https://gitlab.com/apparmor/apparmor/-/issues/452
Fixes: e3fca60d1 ("parser: add the ability to specify a priority prefix to rules")
Signed-off-by: John Johansen <john.johansen@canonical.com>
Closes#452
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1396
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: John Johansen <john@jjmx.net>
There is an integer overflow when comparing priorities when cmp is
used because it uses subtraction to find lessthan, equal, and greater
than in one operation.
But INT_MAX and INT_MIN are being used by priorities and this results
in INT_MAX - INT_MIN and INT_MIN - INT_MAX which are both overflows
causing an incorrect comparison result and selection of the wrong
rule permission.
Closes: https://gitlab.com/apparmor/apparmor/-/issues/452
Fixes: e3fca60d1 ("parser: add the ability to specify a priority prefix to rules")
Signed-off-by: John Johansen <john.johansen@canonical.com>
commit 1fa45b7c1 ("parser: dfa minimization prepare for extended
permissions") removed implicit filtering of explicit denies in the
minimization pass (the information was ignored in building the set of
final accept states).
The filtering of explicit denies reduces the size of the produced
dfa. Since we need to be smarter about when explicit denies are
kept (eg. during complain mode), and most dfas are limited to 65k
states we currently need to filter explicit deny perms by default.
To compensate commit 2737cb2c2 ("parser: minimization - remove
unnecessary second minimization pass") moved the
apply_and_clear_deny() to before minimization. However its check to
apply removal denials before minimization is broken. Remove minimization
triggering apply_and_clear_deny() and just set the FILTER_DENY flag
by default, until we have better selection of rules/conditions where
explicit deny information should be carried through to the backend.
Fixes: 2737cb2c2 ("parser: minimization - remove unnecessary second minimization pass")
Signed-off-by: John Johansen <john.johansen@canonical.com>
'testcase01', 'testcase12' and 'testcase13' contain a strange mix of
exec and network events.
Nevertheless, there's enough information to parse them as good-enough
exec events. While this is not perfectly correct, it's better than
skipping these logs in this test.
Stop expecting that these profiles have a wrong content, and adjust them
so that they contain the (somewhat) expected exec rule.
So far, exec events were accidentally skipped in
test-libapparmor-test_multi.py because aa[profile][hat] was not
initialized, and ask_exec() exited early because of this.
Initialize aa[profile][hat] in the test to fix this.
To avoid that someone needs to select "inherit" each time the tests run,
add an optional default_ans parameter to ask_exec(), and let the test
call it with 'CMD_ix'.
(In case you wonder - defaulting to CMD_cx would ask to sanitize the
environment. CMD_ix avoids this.)
Also, we have to copy over aa[profile][hat] to log_dict in the test
because ask_exec() modifies aa[...], but the test only checks its local
log_dict.
Finally, add the expected exec rules to the *.profile files
peer name=... is invalid in dbus message rules.
Note that this testcase is currently disabled in the utils tests because
it's based on a multiline log.
It is handled correctly in the current codebase.
It would be even better if it would generate a link rule that includes
the source, but let's leave that for a later fix.
confirm_and_abort() is unused (note that a function with the same name
exists in ui.py and is used there)
Also delete the now-unused delete_profile() - luckily it was never used,
because it would also have deleted profiles that were "just" modified.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1388
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: Christian Boltz <apparmor@cboltz.de>
confirm_and_abort() is unused (note that a function with the same name
exists in ui.py and is used there)
Also delete the now-unused delete_profile() - luckily it was never used,
because it would also have deleted profiles that were "just" modified.
Systemd's PrivateTmp= in transmission service is causing mount namespaces to be used leading to disconnected paths
[395201.414562] audit: type=1400 audit(1727277774.392:573): apparmor="ALLOWED" operation="sendmsg" class="file" info="Failed name lookup - disconnected path" error=-13 profile="transmission-daemon" name="run/systemd/notify" pid=193060 comm="transmission-da" requested_mask="w" denied_mask="w" fsuid=114 ouid=0
Fixes: https://bugs.launchpad.net/bugs/2083548
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1355
Approved-by: Ryan Lee <rlee287@yahoo.com>
Merged-by: Steve Beattie <steve+gitlab@nxnw.org>
The artifact restoration step does not preserve mtime, resulting in source files newer than built files, resulting in a needless rebuild of everything before actually running the tests.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
When a log like system.journal is passed on to aa-genprof, for
example, the user receives a TypeError exception: in method
'parse_record', argument 1 of type 'char *'
This patch catches that exception and displays a more meaningful
message.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/436
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
As for %s when the pointer is null: even if gcc prints (null) this is still undefined behavior, so we should do this explicitly
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
These are small changes to the man pages, with the most important one being updating some function signatures to be consistent with apparmor.h.
We should put together a man page for aalogparse functions too, but I'm submitting this MR first to get the smaller changes in faster.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1378
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: Ryan Lee <rlee287@yahoo.com>
The timeout parameter for subprocess.Popen.communicate has been available since Python 3.3. Given the fragility of SIGALRM based mechanisms, there's no reason to reimplement our own timeout instead of using the built-in one.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1377
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: Christian Boltz <apparmor@cboltz.de>
As I have read multiple MR mentioning the `nameservice-strict`. Therefore, I thought it would make sense to directly import it here.
To give some context, this abstraction is probably the most commonly included abstraction (after `base`). In `apparmor.d`, it is used by over 700 profiles (only counting direct import). Therefore, adding new rules can have an important impact over a lot of profiles.
Note: the abstraction is a direct import from https://gitlab.com/roddhjav/apparmor.d. The license is the same, I obviously kept Morfikov copyright line. However, I am not sure either or not the SPDX identifier can be used here.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1368
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Approved-by: Christian Boltz <apparmor@cboltz.de>
Approved-by: Ryan Lee <rlee287@yahoo.com>
Merged-by: Georgia Garcia <georgia.garcia@canonical.com>
Bash will try to read the passwd database to find the shell of a user if
$SHELL is not set. This causes zgrep to trigger
```
apparmor="DENIED" operation="open" class="file" profile="zgrep" name="/etc/nsswitch.conf" comm="zgrep" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
apparmor="DENIED" operation="open" class="file" profile="zgrep" name="/etc/passwd" comm="zgrep" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
```
if called in a sanitized environment. As the functionality of zgrep is
not impacted by a limited Bash environment, add deny rules to avoid the
potentially misleading AVC messages.
Signed-off-by: Georg Pfuetzenreuter <mail@georg-pfuetzenreuter.net>
So far, change_profile_flags() in aa.py is the only user of
ProfileStorage's 'name'.
Rewrite minitools test_cleanprof() so that most of its code can be
reused, and add a test that runs 'aa-complain
/usr/bin/a/simple/cleanprof/test/profile' on cleanprof.in to ensure
aa-complain still works as expected on subprofiles and hats.
Note: aa-complain $profilename will change the flags of hats, but not
child profiles. This is a known issue, and doesn't change with this MR.
Instead of always storing the name of the main profile, store the child
profile/hat name if we are in a child profile or hat.
As a result, we always get the correct "profile xy" header even for
child profiles when dumping the ProfileStorage object.
Also extend the tests to check that the name gets stored correctly.
Seen on various VMs, my guess is that bash wants to translate a uid to a
username.
Log events (slightly shortened)
apparmor="DENIED" operation="open" class="file" profile="zgrep" name="/etc/nsswitch.conf" comm="zgrep" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
apparmor="DENIED" operation="open" class="file" profile="zgrep" name="/etc/passwd" comm="zgrep" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
Systemd's PrivateTmp= in transmission service is causing mount namespaces to be used leading to disconnected paths
[395201.414562] audit: type=1400 audit(1727277774.392:573): apparmor="ALLOWED" operation="sendmsg" class="file" info="Failed name lookup - disconnected path" error=-13 profile="transmission-daemon" name="run/systemd/notify" pid=193060 comm="transmission-da" requested_mask="w" denied_mask="w" fsuid=114 ouid=0
Fixes: https://bugs.launchpad.net/bugs/2083548
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
This is one of those functions that never worked anyways, because it
modified the passed-in label in place. Moreover, it is a low-level
interface that requires its callers to manually construct a binary query.
As such, it would be better not to expose it and to add wrappers like
aa_query_file_path for the other query classes if that functionality is
needed later.
The removal of this function from the bindings was dropped from !1337 because it exposed functionality that was not present in wrappers around aa_query_label. However, upon further discussion, we decided that it'd be better to remove it now and add other wrappers to libapparmor itself if the functionality provided by the existing wrappers became insufficient.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1352
Approved-by: John Johansen <john@jjmx.net>
Merged-by: Ryan Lee <rlee287@yahoo.com>
This is one of those functions that never worked anyways, because it
modified the passed-in label in place. Moreover, it is a low-level
interface that requires its callers to manually construct a binary query.
As such, it would be better not to expose it and to add wrappers like
aa_query_file_path for the other query classes if that functionality is
needed later.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
This pipeline only makes sense to run in the upstream project where
the coverity variables are defined, so they currently fail in forks.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
- Use format "profile remmina /usr/bin/remmina";
- Add more abstractions and remove network rules since they are include
in nameservice;
- Add thumbnails and gvfsd conditions after more tests;
Signed-off-by: Paulo Flabiano Smorigo <pfsmorigo@gmail.com>
It doesn't make sense to expose the *_raw functions or the varg version
of aa_change_hatv to higher-level languages. While technically a breaking
change, the generated bindings for these functions never actually worked
anyways:
- aa_change_hat_vargs uses C varargs, which SWIG passes in NULL for by
default. It does not attempt to process the passed-in arguments at all
(and in fact caused an unused-argument compiler warning when compiling
the generated bindings).
- aa_getprocattr_raw and aa_getpeercon_raw both place output into a ``char
**mode`` pointer. SWIG by default generates these as opaque pointer
object arguments, rendering them unusable for getting output. Future
patches would be needed to fix ``char**`` arguments for the other functions
that use them. Moreover, these functions expect their caller to handle
memory allocation, which is also not possible from a higher-level
language point of view.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1337
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: Ryan Lee <rlee287@yahoo.com>
It doesn't make sense to expose the *_raw functions or the varg version
of aa_change_hatv to higher-level languages. While technically a breaking
change, the generated bindings for these functions never actually worked
anyways:
- aa_change_hat_vargs uses C varargs, which SWIG passes in NULL for by
default. It does not attempt to process the passed-in arguments at all
(and in fact caused an unused-argument compiler warning when compiling
the generated bindings).
- aa_getprocattr_raw and aa_getpeercon_raw both place output into a char
**mode pointer. SWIG by default generates these as opaque pointer
object arguments, rendering them unusable for getting output. Future
patches would be needed to fix char** arguments for the other functions
that use them. Moreover, these functions expect their caller to handle
memory allocation, which is also not possible from a higher-level
language point of view.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
This patchset adds annotations so that SWIG can automatically manage the memory lifetimes of aa_log_record objects, and ensures proper cleanup is done in the %exception handler.
This is the first of a sequence of MRs to overhaul the SWIG bindings and fix pieces that never actually worked in the first place. As fixing those other pieces will require breaking changes, I am separating out the non-breaking changes into separate MRs.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1334
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: Ryan Lee <rlee287@yahoo.com>
Swig generates a "thisown" attribute, which is an escape hatch in case
higher-level code does something weird and needs to tell SWIG whether to
free the C object when Python garbage collects it. Adding this attribute
is not a breaking change w.r.t access to the other attributes of the parsed
record.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Unfortunately SWIG_exception does not support throwing OSError, so this
still requires Python-specific code.
Unlike just returning NULL, this will clean up intermediate allocations.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
This change matches the names in the .c source and the man page for aa_query_label,
and also simplifies the typemap annotations needed to make the SWIG versions usable.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
The autoconf infrastructure for building this doesn't even show up in the Git history, so there should be no issue with removing the ghosts of Java from the codebase
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
The parser and binutils pot file have not been recently refreshed. Update them to current code and add missing pot files for aa_load and aa_status. Also give aa_status base support for translations to populate its pot file.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1318
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Tested by using Valgrind's Helgrind and DRD against the reentrancy test that I wrote: they both report no errors with the changes while reporting many errors with the old versions.
Commits "Inline _parse_yacc in libaalogparse" and "Make parse_record take a const char pointer since it never modified str anyways" have a tiny potential to be backwards-incompatible changes: I have justified why they shouldn't be in the commit messages, but it's worth looking over in case I was mistaken and we need to back those out.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1322
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
... without all the profiles generated by the gen-*.py scripts.
This target is meant for local manual testing, especially when working
on additional simple_tests profiles.
It makes local testing much faster (15 seconds for ~2k profiles vs.
several minutes for the additional ~70k profiles generated by gen-*.py)
Needless to say that the CI should continue to use the parser_sanity
target that includes all the generated profiles.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1325
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
... without all the profiles generated by the gen-*.py scripts.
This target is meant for local manual testing, especially when working
on additional simple_tests profiles.
It makes local testing much faster (15 seconds for ~2k profiles vs.
several minutes for the additional ~70k profiles generated by gen-*.py)
Needless to say that the CI should continue to use the parser_sanity
target that includes all the generated profiles.
The entry AA_RECORD_SYNTAX_V1 is only there for API compatibility reasons.
If we wanted to remove it, we could just renumber the other two entries
to preserve ABI compatibility. However, it seems easier to just delete the
entry if we ever break backcompat with a libapparmor2.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
This shouldn't be a breaking change because it's fine to pass a
non-const pointer to a function taking a const pointer, but not the other way round
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
This function was only ever called once inside libaalogparse.c, and it looks
simple enough to not need to be split out into its own helper function.
As this function was never exposed publicly in installed header files, removing it
is not a breaking API change.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
The generated grammar.h already sets the correct YYDEBUG value regardless
of whether parse.trace is defined
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
To run the network port range equality tests, we need to check if the
kernel supports the network_v8/af_inet feature. Also, a new file
features.af_inet is needed containing the af_inet feature.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
This allows a user to create this file if they wish even though we don't
actually ship it directly.
Signed-off-by: Alex Murray <alex.murray@canonical.com>
When the profile already contains a "file" rule containing the owner
prefix and the tool is trying to handle a new file entry, it tries to
show it in the logprof header as "old mode".
The issue is that when the owner rule is an implicit all files
permission, then the object "FileRule" is used instead of the set of
permissions. When subtracting FileRule from set() a TypeError
exception is thrown.
Fix this by "translating" FileRule.ALL perms to "mrwlkix".
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/429
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Unfortunately aa_status did not support translations. Add a base support
and the initial pot file. There are no translations done at this time.
Signed-off-by: John Johansen <john.johansen@canonical.com>
aa_load was missing a pot file for translations. Add a pot file for
aa_load and sync it to the code.
Signed-off-by: John Johansen <john.johansen@canonical.com>
The parser pot file should have been updated before beta. Make
sure it is up to date with the current code.
Signed-off-by: John Johansen <john.johansen@canonical.com>
This is unnecessary, users can just directly edit tunables/rygel if they wish to
customise the allowed paths.
Signed-off-by: Alex Murray <alex.murray@canonical.com>
utils: ignore peer when parsing logs for non-peer access modes
Some access modes (create, setopt, getopt, bind, shutdown, listen,
getattr, setattr) cannot be used with a peer in network rules.
Due to how auditing is implemented in the kernel, the peer information
might be available in the log (as faddr= but not daddr=), which causes
a failure in log parsing.
When parsing the log, check if that's the case and ignore the peer,
avoiding the exception on the NetworkRule constructor.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/427
Reported-by: Evan Caville <evan.caville@canonical.com>
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Closes#427
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1314
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: John Johansen <john@jjmx.net>
The wording of "scrub the environment" with respect to execution modes is misleading, because a quick read of it could imply that it removes all environment variables. However, it actually enables ld.so's secure-execution mode, which removes a very limited subset of them. This MR rewords the relevant documentation and prompts. If proper environment variable filtering is added later, the documentation can be updated again then.
Synchronizes-with:
- Wiki page update, which I can do after this MR is approved
- Kernel patch to update wording of debug logs (patch submitted to the Apparmor mailing list [here](https://lists.ubuntu.com/archives/apparmor/2024-August/013339.html))
Things that may need updating first:
- Translations: attempting to update `utils/po/apparmor-utils.pot` resulted in a bunch of unrelated changes, so I'd like to ask about translation statuses before making a commit that updates that file properly.
- Adding info on which libc's actually behave differently based on AT_SECURE: glibc and musl libc both do, but they may do subtly different things. I don't know about other libc's.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1315
Approved-by: John Johansen <john@jjmx.net>
Merged-by: Ryan Lee <rlee287@yahoo.com>
Some access modes (create, setopt, getopt, bind, shutdown, listen,
getattr, setattr) cannot be used with a peer in network rules.
Due to how auditing is implemented in the kernel, the peer information
might be available in the log (as faddr= but not daddr=), which causes
a failure in log parsing.
When parsing the log, check if that's the case and ignore the peer,
avoiding the exception on the NetworkRule constructor.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/427
Reported-by: Evan Caville <evan.caville@canonical.com>
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
io_uring and userns mediation are encoding permissions on the class
byte. This is a mistake that should never have been allowed.
With the addition of rule priorities the class byte mediates rule,
that ensure the kernel can determine a class is being mediated is
given the highest priority possible, to ensure class mediation can not
be removed by a deny rule. See
61b7568e1 ("parser: bug fix mediates_X stub rules.")
for details.
Unfortunately this breaks rule classes that encode permissions on the
class byte, because those rules will always have a lower priority and
the class mediates rule will always be selected over them resulting in
only the class mediates permission being on the rule class state.
Fix this by adding the mediaties class rules for these rule classes
with the lowest priority possible. This means that any rule mediating
the class will wipe out the mediates class rule. So add a new mediates
class rule at the same priority, as the rule being added.
This is a naive implementation and does result in more mediates rules
being added than necessary. The rule class could keep track of the
highest priority rule that had been added, and use that to reduce the
number of mediates rules it adds for the class.
Technically we could also get away with not adding the rules for allow
rules, as the kernel doesn't actually check the encoded permission but
whether the class state is not the trap state. But it is required with
deny rules to ensure the deny rule doesn't result in permissions being
removed from the class, resulting in the kernel thinking it is
unmediated. We also want to ensure that mediation is encoded for other
rule types like prompt, and in the future the kernel could check the
permission so we do want to guarantee that the class state has the
MAY_READ permission on it.
Note: there is another set of classes (file, mqueue, dbus, ...) which
encodes a default rule permission as
class .* <perm>
this encoding is unfortunate in that it will also add the permission
to the class byte, but also sets up following states with the permission.
thankfully, this accespt anything, including nothing generally isn't
valid in the nothing case (eg. a file without any absolute name). For
this set of classes, the high priority mediates rule just ensures
that the null match case does not have permission.
Fixes: 61b7568e1 parser: bug fix mediates_X stub rules.
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1307
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: John Johansen <john@jjmx.net>
af_protos.h is a generated table of the protocols created by looking
for definitions of IPPROTO_* in netinet/in.h. Depending on the
architecture, the order of the table may change when using -dM in the
compiler during the extraction of the defines.
This causes an issue because there is more than one IPPROTO defined
by the value 0: IPPROTO_IP and IPPROTO_HOPOPTS which is a header
extension used by IPv6. So if IPPROTO_HOPOPTS was first in the table,
then protocol=0 in the audit logs would be translated to hopopts.
This caused a failure in arm 32bit:
Output doesn't match expected data:
--- ./test_multi/testcase_unix_01.out 2024-08-15 01:47:53.000000000 +0000
+++ ./test_multi/out/testcase_unix_01.out 2024-08-15 23:42:10.187416392 +0000
@@ -12,7 +12,7 @@
Peer Addr: @test_abstract_socket
Network family: unix
Socket type: stream
-Protocol: ip
+Protocol: hopopts
Class: net
Epoch: 1711454639
Audit subid: 322
By the time protocol is resolved in grammar.y, we don't have have
access to the net family to check if it's inet6. Instead of making
protocol dependent on the net family, make the order of the
af_protos.h table consistent between architectures using -dD.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1309
Approved-by: John Johansen <john@jjmx.net>
Merged-by: Georgia Garcia <georgia.garcia@canonical.com>
gst-plugin-scanner wants to try and scan hardware devices but since rygel itself
doesn't actually use or need any access to such devices the access to these can
be denied and any log spam silenced via an explicit denial rule.
Signed-off-by: Alex Murray <alex.murray@canonical.com>
Allow more easy customisation of the paths allowed to rygel by introducing a
tunable which provides the @{rygel_media_dirs} variable and an example
site-local file to show how this can be easily extended. Essentially this
follows the same logic as the home tunable with @{HOME}.
Signed-off-by: Alex Murray <alex.murray@canonical.com>
af_protos.h is a generated table of the protocols created by looking
for definitions of IPPROTO_* in netinet/in.h. Depending on the
architecture, the order of the table may change when using -dM in the
compiler during the extraction of the defines.
This causes an issue because there is more than one IPPROTO defined
by the value 0: IPPROTO_IP and IPPROTO_HOPOPTS which is a header
extension used by IPv6. So if IPPROTO_HOPOPTS was first in the table,
then protocol=0 in the audit logs would be translated to hopopts.
This caused a failure in arm 32bit:
Output doesn't match expected data:
--- ./test_multi/testcase_unix_01.out 2024-08-15 01:47:53.000000000 +0000
+++ ./test_multi/out/testcase_unix_01.out 2024-08-15 23:42:10.187416392 +0000
@@ -12,7 +12,7 @@
Peer Addr: @test_abstract_socket
Network family: unix
Socket type: stream
-Protocol: ip
+Protocol: hopopts
Class: net
Epoch: 1711454639
Audit subid: 322
By the time protocol is resolved in grammar.y, we don't have have
access to the net family to check if it's inet6. Instead of making
protocol dependent on the net family, make the order of the
af_protos.h table consistent between architectures using -dD.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
io_uring and userns mediation are encoding permissions on the class
byte. This is a mistake that should never have been allowed.
With the addition of rule priorities the class byte mediates rule,
that ensure the kernel can determine a class is being mediated is
given the highest priority possible, to ensure class mediation can not
be removed by a deny rule. See
61b7568e1 ("parser: bug fix mediates_X stub rules.")
for details.
Unfortunately this breaks rule classes that encode permissions on the
class byte, because those rules will always have a lower priority and
the class mediates rule will always be selected over them resulting in
only the class mediates permission being on the rule class state.
Fix this by adding the mediaties class rules for these rule classes
with the lowest priority possible. This means that any rule mediating
the class will wipe out the mediates class rule. So add a new mediates
class rule at the same priority, as the rule being added.
This is a naive implementation and does result in more mediates rules
being added than necessary. The rule class could keep track of the
highest priority rule that had been added, and use that to reduce the
number of mediates rules it adds for the class.
Technically we could also get away with not adding the rules for allow
rules, as the kernel doesn't actually check the encoded permission but
whether the class state is not the trap state. But it is required with
deny rules to ensure the deny rule doesn't result in permissions being
removed from the class, resulting in the kernel thinking it is
unmediated. We also want to ensure that mediation is encoded for other
rule types like prompt, and in the future the kernel could check the
permission so we do want to guarantee that the class state has the
MAY_READ permission on it.
Note: there is another set of classes (file, mqueue, dbus, ...) which
encodes a default rule permission as
class .* <perm>
this encoding is unfortunate in that it will also add the permission
to the class byte, but also sets up following states with the permission.
thankfully, this accespt anything, including nothing generally isn't
valid in the nothing case (eg. a file without any absolute name). For
this set of classes, the high priority mediates rule just ensures
that the null match case does not have permission.
Fixes: 61b7568e1 parser: bug fix mediates_X stub rules.
Signed-off-by: John Johansen <john.johansen@canonical.com>
This enables adding a priority to a rules in policy.
Rules have a default priority of 0. The priority prefix can be added
before the other currently support rule prefixes, ie.
[priority prefix][audit qualifier][rule mode][owner]
If present a numerical priority can be assigned to the rule, where the
greater the number the higher the priority. Eg.
priority=1 audit file r /etc/passwd,
priority=-1 deny file w /etc/**,
Rule priority allows the rule with the highest priority to completely
override lower priority rules where they overlap. Within a given
priority level rules will accumulate in standard apparmor fashion.
Eg. given
priority=1 w /*c,
priority=0 r /a*,
priority=-1 k /*b*,
/abc, /bc, /ac .. will have permissions of w
/ab, /abb, /aaa, .. will have permissions of r
/b, /bcb, /bab, .. will have permissions of k
User specified rule priorities are currently capped at the arbitrary
values of 1000, and -1000.
Notes:
* not all rule types support the priority prefix. Rukes like
- network
- capability
- rlimits
need to be reworked to properly preserve the policy rule structure.
* this patch does not support priority on rule blocks
* this patch does not support using a variable in the priority value.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1261
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
the ix portion of file, causes x conflicts in regular priority. The
long term goal is to fix this by using dominance for x rules. But in
the mean time we can fix by giving the ix portion of the rule a
reduced priority.
Signed-off-by: John Johansen <john.johansen@canonical.com>
This enables adding a priority to a rules in policy, finishing out the
priority work done to plumb priority support through the internals in
the previous patch.
Rules have a default priority of 0. The priority prefix can be added
before the other currently support rule prefixes, ie.
[priority prefix][audit qualifier][rule mode][owner]
If present a numerical priority can be assigned to the rule, where the
greater the number the higher the priority. Eg.
priority=1 audit file r /etc/passwd,
priority=-1 deny file w /etc/**,
Rule priority allows the rule with the highest priority to completely
override lower priority rules where they overlap. Within a given
priority level rules will accumulate in standard apparmor fashion.
Eg. given
priority=1 w /*c,
priority=0 r /a*,
priority=-1 k /*b*,
/abc, /bc, /ac .. will have permissions of w
/ab, /abb, /aaa, .. will have permissions of r
/b, /bcb, /bab, .. will have permissions of k
User specified rule priorities are currently capped at the arbitrary
values of 1000, and -1000.
Notes:
* not all rule types support the priority prefix. Rukes like
- network
- capability
- rlimits need to be reworked
need to be reworked to properly preserve the policy rule structure.
* this patch does not support priority on rule blocks
* this patch does not support using a variable in the priority value.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Currently mediates_X stub rules are added to the dfa to ensure a valid
transition state will exist if X should be mediated. The kernel uses
this to test whether the dfa supports certain mediation classes.
Unfortunately the mediates stub rules can be removed by other rules,
combined with minimization. In the allow case this is not a problem,
as if the stub rule is removed it will be due to state merging and the
test will still be valid. Unfortunately the deny case can wipe out the
stub rule in a couple of cases, meaning the when the kernel tests that
its in a valid state for mediation it will fail and treat the dfa as
not mediating the rule type, which results in allowing instead of
denying.
Fix this by making sure mediated stub rules can't be overridden by a
deny rule by giving them maximum priority.
Note: there is another issue with stub rule elimination in the allow
case. It will can cause equality tests to fail when combined
with priority rules, because the stub rules where added at
priority 0 and an actual rule of higher priority could
completely override it removing the permission on the stub rule.
This issue will be caught by the equality.sh tests in the
following patch that exposes priority to rules in policy.
Signed-off-by: John Johansen <john.johansen@canonical.com>
The prefix comparison doesn't need to do as many operations as it is
doing, and the operator< can be based on the cmp() fn further reducing
the chance that the code will get out of sync if prefixes are changed.
Signed-off-by: John Johansen <john.johansen@canonical.com>
the parser front end boolean is used for both boolean and integer
values. This is confusing when integer values different than 1 or 0
are being assigned to and from boolean.
Split its uses into the correct semantic boolean and integer cases.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Currently use of extended perms are dependent on prompt rules being present
in policy. Switch to using extended perms if they are supported.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Moving apply_and_clear_deny() before the first minimization pass, which
was necessary to propperly support building accept information for
older none extended permission dfas, allows us to also get rid of doing a
second minimization pass if we want to force clearing explicit deny
info from extended permission tables.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Instead of compressing the permission set into 128 bit and using that
as the index in the permission map, just use the permissions directly
as the index into the permission map.
Note: this will break equality and minimization tests. Because deny
is not being cleared it will result in more partitions in the initial
setup. This will be addressed and the tests will be fixed in a follow
on patch.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Hash minimization was removed in
f0b154528 Fix dfa minimization
however some remnants of minimization remained. A comment and the use
of the hash but only as a 0 value. Drop this dead code and comment.
Signed-off-by: John Johansen <john.johansen@canonical.com>
The hfa stores next/check transitions in 16 bit fields to reduce memory
usage. However this means the state machine can on contain 2^16
states.
Allow the next/check tables to be 32 bit. This theoretically could allow
for 2^32 states however the base table uses the top 8 bits as flags
giving us only 2^24 bits to index into the next/check tables. With
most states having at least 1 transition this effectively caps the
number of states at 2^24.
To obtain 2^32 possible states a flags table needs to be added. Add
a skeleton around supporting a flags table, so we can note the remaining
work that needs to be done. This patch will only allow for 2^24 states.
Bug: https://gitlab.com/apparmor/apparmor/-/issues/419
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1303
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: John Johansen <john@jjmx.net>
The hfa stores next/check transitions in 16 bit fields to reduce memory
usage. However this means the state machine can on contain 2^16
states.
Allow the next/check tables to be 32 bit. This theoretically could allow
for 2^32 states however the base table uses the top 8 bits as flags
giving us only 2^24 bits to index into the next/check tables. With
most states having at least 1 transition this effectively caps the
number of states at 2^24.
To obtain 2^32 possible states a flags table needs to be added. Add
a skeleton around supporting a flags table, so we can note the remaining
work that needs to be done. This patch will only allow for 2^24 states.
Bug: https://gitlab.com/apparmor/apparmor/-/issues/419
Signed-off-by: John Johansen <john.johansen@canonical.com>
Older kernels do not support an xtable grouped with the policy dfa.
The presence of a policy.dfa does not indicate whether we should create
an xtable with the policy dfa.
Instead the check should be if the kernel supports the extended
permstable32 format.
Signed-off-by: John Johansen <john.johansen@canonical.com>
__uint128 is not supported by gcc on 32 bit architectures so rework
the 128 bit map key to be a pair of 64bit numbers.
Signed-off-by: John Johansen <john.johansen@canonical.com>
switch permission bits to use perm32_t type. This is just annotating
the code as it is no different than uint32_t at this time.
We do not convert the accept values as they may be mapped permission
bits or they may be and index value.
Signed-off-by: John Johansen <john.johansen@canonical.com>
The use of xbits can not pass verification so we need to leave them
off this makes the profile a leaf profile.
Signed-off-by: John Johansen <john.johansen@canonical.com>
v1 of permstable32 has some broken verification checks. By using two
copies of a merged dfa and an xtable the same size of the permstable
we can work around the issue.
Signed-off-by: John Johansen <john.johansen@canonical.com>
There are two distinct declarations of perms_t.
rule.h: typedef uint32_t perms_t
hfa.h: class perms_t
these definitions clash when the front end and backend share more info.
To avoid this rename rule.h to perm32_t, and move the definition into
perms.h and use it in struct aa_perms.
Signed-off-by: John Johansen <john.johansen@canonical.com>
If extended permissions are supported use them. We need to build a
permission table and set the accept state of the chfa up as an index
into the table.
For now map the front end permission layout into the old format and
then convert that to the perms table just as the kernel does.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Add the ability to parse the prompt qualifier but do not provide
functionality because the backend does not currently support prompt
permissions.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Remove conditional logic from the parser and move it to its own class,
that way any improvements or conditional features will make cleaner
changes.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
I couldn't figure out why the show info window was using a different
font color than the theme default but this forces its use.
Also, add padding when "Show Current Profile" button is not shown.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
In this change, I'm also removing the messagebox window and reusing
the more info GUI already implemented
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
aa-notify: Enhanced Graphical User Interfaces
- Added support for --prompt-filter=userns: a popup GUI now appears when an unprivileged, unconfined process attempts to create a user namespace, enabling automatic generation of specific unconfined profiles.
- Added GUIs for easy rule addition.
- Upgraded notifications to two-button format, enabling extended information display and direct rule addition.
- Initial support for customized notification messages based on rule type.
Signed-off-by: Maxime Bélair <maxime.belair@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1281
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: John Johansen <john@jjmx.net>
Code assumes full username would be printed, but this actually requires an extra command line option:
Please double check that this is the only place where `last` is called as a binary before merging this MR.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1293
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
POSIX states that d_name has up to NAME_MAX (255) characters, and glibc
stores d_name as an array of size NAME_MAX+1 (256). Thus, supplying
PATH_MAX (4096) as the max length could trigger a buffer overrun. This
could be an even bigger issue on other libcs, as POSIX states that d_name
can be unsized.
Fortunately, this does not seem to cause actual issues, as the length is
only used to compare d_name to a short fixed string. However, it'd be better
to pass the actual correct max length to strnlen.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1290
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: Georgia Garcia <georgia.garcia@canonical.com>
POSIX states that d_name has up to NAME_MAX (255) characters, and glibc
stores d_name as an array of size NAME_MAX+1 (256). Thus, supplying
PATH_MAX (4096) as the max length could trigger a buffer overrun. This
could be an even bigger issue on other libcs, as POSIX states that d_name
can be unsized.
Fortunately, this does not seem to cause actual issues, as the length is
only used to compare d_name to a short fixed string. However, it'd be better
to pass the actual correct max length to strnlen.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
The linkage of aa-load with the dynamic libapparmor fails with:
aa_load.c:273: undefined reference to `aa_split_overlay_str'
That is because when aa_split_overlay_str was added to libapparmor,
the function was not added to the library map.
Fixes: 50054ff0 ("add aa_split_overlay_str")
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1288
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
The linkage of aa-load with the dynamic libapparmor fails with:
aa_load.c:273: undefined reference to `aa_split_overlay_str'
That is because when aa_split_overlay_str was added to libapparmor,
the function was not added to the library map.
Fixes: 50054ff0 ("add aa_split_overlay_str")
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Commonly used by applications to determine if Linux is running in
FIPS mode. As we already allow access to FIPS specific library files
as part of base, allow this there as well.
Signed-off-by: Georg Pfuetzenreuter <mail@georg-pfuetzenreuter.net>
If the test ran under a fs mounted with nosuid option, then these bits
would be ignored and the test would fail. In that case, detect it and
run the test in a tmpfs mountpoint without nosuid.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
When /tmp is of type tmpfs, the test didn't run because you can't
mount a swapfile on it. This patch mounts an ext2 mountpoint on
$tmpdir so that the swapfile can be mounted on top of it instead of
tmpfs.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
When /tmp is mounted, remounting / as private for tests that don't
work when shared still fail because /tmp remains as shared. The option
-T in findmnt helps determine the mountpoint in a certain directory,
so use that with $tmpdir to determine the root.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
The tests that use pivot_root or move mountpoints with mount have to
make sure that / is private for the tests to work. Refactor that logic
into a file to be sourced by the test scripts
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
The abi is not being respected by mqueue rules in many cases. If policy
does ot specify an mqueue rule the abi is correctly applied but if
an mqueue rule is specified explicitly or implicitly (eg. allow all).
without setting the mqueue type OR setting the mqueue type to sysv.
The abi will be ignored and mqueue will be enforced for policy regadless.
Known good mqueue rule that respects abi
mqueue type=posix,
# and all variations that keep type=posix
Known bad mqueue rules that do not respect abi
mqueue,
# and all variants that do not specify the type= option
mqueue type=sysv,
# and all variants that specify the type=sysv option
Issue: https://gitlab.com/apparmor/apparmor/-/issues/412
Fixes: d98c5c4cf ("parser: add parser support for message queue mediation")
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1277
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
The kernel does not expect a name and it is not used even within the
parser so drop it. Correct the padding calculation.
sizeof(th_version)
includes the trailing \0 in the count so we should not be adding it
explicitly. Doing so made it seem like we were writing an extra byte
and messing things up, because the string write below did not include
the \0 which we had to add explicitly.
Switch to writing the th_version using size_of() bytes as is used in
the pad calculation, to avoid confusion around the header padding.
Signed-off-by: John Johansen <john.johansen@canonical.com>
The abi is not being respected by mqueue rules in many cases. If policy
does ot specify an mqueue rule the abi is correctly applied but if
an mqueue rule is specified explicitly or implicitly (eg. allow all).
without setting the mqueue type OR setting the mqueue type to sysv.
The abi will be ignored and mqueue will be enforced for policy regadless.
Known good mqueue rule that respects abi
mqueue type=posix,
# and all variations that keep type=posix
Known bad mqueue rules that do not respect abi
mqueue,
# and all variants that do not specify the type= option
mqueue type=sysv,
# and all variants that specify the type=sysv option
Issue: https://gitlab.com/apparmor/apparmor/-/issues/412
Fixes: d98c5c4cf ("parser: add parser support for message queue mediation")
Signed-off-by: John Johansen <john.johansen@canonical.com>
`execpath` allows to reliably store the path of the binary that triggered a log.
This is useful because comm was not sufficient to reliably identify a binary
Signed-off-by: Maxime Bélair <maxime.belair@canonical.com>
This reverts commit 78ae956087.
Commit 78ae956087 causes policy to not
to conform to protocol as determined by the kernel. Technically the
reverted patch is correct and the kernel is wrong but we can not
change 15 years of history.
The reason it breaks the policy in the kernel is because the kernel
does not use the name field, and does not expect it. It just expects
the size with a single trailing 0. This doesn't break because this
section is all padded to 64 bytes so writing the extra 0 doesn't
hurt as it is effectively just manually adding to the padding.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Some applications using the bwrap profile don't function properly due to "Failed name lookup - deleted entry". The following denials trying to start flatpak KeePassXC is an example showing that it happens for both bwrap and unpriv_bwrap profiles:
Jul 12 09:44:37 ubuntu2404 kernel: audit: type=1400 audit(1720741477.106:310): apparmor="DENIED" operation="link" class="file" info="Failed name lookup - deleted entry" error=-2 profile="bwrap" name="/home/\*\*\*\*/.var/app/org.keepassxc.KeePassXC/config/keepassxc/#317211" pid=4021 comm="keepassxc" requested_mask="l" denied_mask="l" fsuid=1000 ouid=1000
Jul 12 09:44:37 ubuntu2404 kernel: audit: type=1400 audit(1720741477.341:317): apparmor="DENIED" operation="link" class="file" profile="unpriv_bwrap" name="/home/**/.var/app/org.keepassxc.KeePassXC/config/keepassxc/keepassxc.ini" pid=4021 comm="keepassxc" requested_mask="l" denied_mask="l" fsuid=1000 ouid=1000 target="/home/**/.var/app/org.keepassxc.KeePassXC/config/keepassxc/#317214"
Fixes: https://launchpad.net/bugs/2072811
I propose this fix for master and apparmor-4.0
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1272
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Without AA_MAY_MOUNT, mount was not allowed by the allow all
rule. AA_DUMMY_REMOUNT does become AA_MAY_MOUNT, but it fixes the
flags to remount only, so other options are not included. Also, add
allow all rule testcases to the mount regression tests.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/410
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
By specifying 0 in the unix type, all rules were allowing only the
"none" type, when it wanted to allow all types, so replace it by
0xffffffff. Also, add this testcase to the unix regression tests.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/410
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Some applications using the bwrap profile don't function properly due
to "Failed name lookup - deleted entry". The following denials trying
to start flatpak KeePassXC is an example showing that it happens for
both bwrap and unpriv_bwrap profiles:
Jul 12 09:44:37 ubuntu2404 kernel: audit: type=1400 audit(1720741477.106:310): apparmor="DENIED" operation="link" class="file" info="Failed name lookup - deleted entry" error=-2 profile="bwrap" name="/home/****/.var/app/org.keepassxc.KeePassXC/config/keepassxc/#317211" pid=4021 comm="keepassxc" requested_mask="l" denied_mask="l" fsuid=1000 ouid=1000
Jul 12 09:44:37 ubuntu2404 kernel: audit: type=1400 audit(1720741477.341:317): apparmor="DENIED" operation="link" class="file" profile="unpriv_bwrap" name="/home/****/.var/app/org.keepassxc.KeePassXC/config/keepassxc/keepassxc.ini" pid=4021 comm="keepassxc" requested_mask="l" denied_mask="l" fsuid=1000 ouid=1000 target="/home/****/.var/app/org.keepassxc.KeePassXC/config/keepassxc/#317214"
Fixes: https://launchpad.net/bugs/2072811
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Saw these couple of accesses fail recently on my Ubuntu 22.04 system:
`Jun 3 15:29:24 darkstar kernel: [5401883.070129] audit: type=1107 audit(1717442964.884:9223): pid=729 uid=102 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/UPower" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.28" pid=2164500 label="firefox" peer_pid=2502 peer_label="unconfined"`
`Jun 3 15:29:24 darkstar kernel: [5401883.070588] audit: type=1107 audit(1717442964.884:9224): pid=729 uid=102 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/UPower" interface="org.freedesktop.UPower" member="EnumerateDevices" mask="send" name=":1.28" pid=2164500 label="firefox" peer_pid=2502 peer_label="unconfined"`
Also, I noticed that the `firefox` profile in the Ubuntu 24.04 package has a rule for `/etc/writable/timezone` that is not present in Git. Figured that should be in here.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/409Closes#409
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1253
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
This is needed to avoid a "Conflicting profiles" error if there are two
profiles for an application, with one of them disabled.
This is not a theoretical usecase - for example, apparmor.d ships some
profiles that replace our "userns+unconfined" profiles. These profiles
use a different filename, and apparmor.d also creates a disable symlink
for the "userns+unconfined" profile it replaces.
I propose this patch for 4.0 and master.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1264
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
... and not only for events in missing hats.
This fixes a crash if the log contains exec events for a hat where not
even the parent profile exists.
I propose this patch for master, 4.0 and 3.1.
(In 3.0, `aa` is still a `hasher` which avoids the crash, therefore it doesn't really need this patch.)
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1265
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: Christian Boltz <apparmor@cboltz.de>
Contrary to what the name would imply aa-unconfined displays info for
both confined and unconfined processes. Add a --short option that only
output processes that are not confined. Eg.
$ ./utils/aa-unconfined
17192 /snap/chromium/2890/usr/lib/chromium-browser/chrome (/snap/chromium/2890/usr/lib/chromium-browser/chrome --password-store=basic --disable-features=TFLiteLanguageDetectionEnabled) confined by 'snap.chromium.chromium (enforce)'
17395 /snap/chromium/2890/usr/lib/chromium-browser/chrome (/snap/chromium/2890/usr/lib/chromium-browser/chrome --type=utility --utility-sub-type=network.mojom.NetworkService --lang=en-US --service-sandbox-type=none --crashpad-handler-pid=17337 --enable-crash-reporter=,snap --change-stack-guard-on-fork=enable --shared-files=v8_context_snapshot_data:100 --field-trial-handle=3,i,16674663885832976354,18417931519279121981,262144 --disable-features=TFLiteLanguageDetectionEnabled --variations-seed-version) confined by 'snap.chromium.chromium (enforce)'
17981 /snap/firefox/4451/usr/lib/firefox/firefox confined by 'snap.firefox.firefox (enforce)'
1353664 /tmp/.mount_OrcaSl7G1va5/bin/orca-slicer not confined
is trimmed to
$ ./utils/aa-unconfined --short
1353664 /tmp/.mount_OrcaSl7G1va5/bin/orca-slicer not confined
Signed-off-by: John Johansen <john.johansen@canonical.com>
The prompt/user upcall mode shows up as a mode of (user). And for
stacked policy with different modes (mixed) is used. Add these to the
list of modes to screen.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Add the ability to list applications that are unconfined and have
any open network socket open, both listening and non-listening.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Add the abiity to list applications that are unconfined and have
open connection ports that are not listening.
Signed-off-by: John Johansen <john.johansen@canonical.com>
The documentation of --paranoid is wrong. It lists all processes and
does not exclude based on whether it has a network port open.
Signed-off-by: John Johansen <john.johansen@canonical.com>
This is needed to avoid a "Conflicting profiles" error if there are two
profiles for an application, with one of them disabled.
This is not a theoretical usecase - for example, apparmor.d ships some
profiles that replace our "userns+unconfined" profiles. These profiles
use a different filename, and apparmor.d also creates a disable symlink
for the "userns+unconfined" profile it replaces.
* UnixRule: Fix handling of peers with a ? and peers that are/need to be quoted
`?` is a valid AARE char, add it to the regexes that match the AARE.
Also add some tests to ensure this is really fixed, and make the error
output of the tests more useful/verbose.
* Fix handling of quoted peers in UnixRule (and others)
In UnixRule (and probably also in other rules that use
print_dict_values()` and `initialize_cond_dict()`), the handling of
peers with a value that is quoted and/or needs to be quoted was broken
because
- quotes didn't get stripped in `initialize_cond_dict()`
- `print_dict_values()` didn't use `quote_if_needed()`
Note: print_dict_values also handles integers (like network ports).
Convert them to a string so that `if ' ' in data` in `quote_if_needed()`
doesn't explode.
Also enable the test that uncovered this bug.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/404Closes#404
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1262
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
In UnixRule (and probably also in other rules that use
print_dict_values()` and `initialize_cond_dict()`), the handling of
peers with a value that is quoted and/or needs to be quoted was broken
because
- quotes didn't get stripped in `initialize_cond_dict()`
- `print_dict_values()` didn't use `quote_if_needed()`
Note: print_dict_values also handles integers (like network ports).
Convert them to a string so that `if ' ' in data` in `quote_if_needed()`
doesn't explode.
Also enable the test that uncovered this bug.
`?` is a valid AARE char, add it to the regexes that match the AARE.
Also add some tests to ensure this is really fixed, and make the error
output of the tests more useful/verbose.
Note: One of the added tests (with a space in the peer name) uncovered a
bug in quote handling. This will be fixed in the next commit.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/404
Update the state machine readme to better reflect how the chfa is
encoded and works. It still needs a lot more but fixes several errors
in the doc and adds some info about state differential encoding, oobs,
and comb compression.
In addition fix an off by own error during chfa encoding. This has
likely never triggered as it gets hidden by being in a section that
is being in a section that is padded to an 8 byte boundary.
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1244
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Expression simplification can get into an infinite loop due to eps
pairs hiding behind and alternation that can't be caught by
normalize_eps() (which exists in the first place to stop a similar
loop).
The loop in question happens in AltNode::normalize when a subtree has
the following structure.
1. elseif (child[dir]->is_type(ALT_NODE)) rotate_node too
alt
/\
/ \
/ \
eps alt
/\
/ \
/ \
alt eps
/\
/ \
/ \
eps eps
2. if (normalize_eps(dir)) results in
alt
/\
/ \
/ \
alt eps
/\
/ \
/ \
alt eps
/\
/ \
/ \
eps eps
3. elseif (child[dir]->is_type(ALT_NODE)) rotate_node too
alt
/\
/ \
/ \
alt alt
/\ /\
/ \ / \
/ \ / \
eps eps eps eps
4. elseif (child[dir]->is_type(ALT_NODE)) rotate_node too
alt
/\
/ \
/ \
eps alt
/\
/ \
/ \
eps alt
/\
/ \
/ \
eps eps
5. if (normalize_eps(dir)) results in
alt
/\
/ \
/ \
alt eps
/\
/ \
/ \
eps alt
/\
/ \
/ \
eps eps
6. elseif (child[dir]->is_type(ALT_NODE)) rotate_node too
alt
/\
/ \
/ \
eps alt
/\
/ \
/ \
alt eps
/\
/ \
/ \
eps eps
back to beginning of cycle
Fix this by detecting the creation of an eps_pair in rotate_node(),
that pair can be immediately eliminated by simplifying the tree in that
step.
In the above cycle the pair creation is caught at step 3 resulting
in
3. elseif (child[dir]->is_type(ALT_NODE)) rotate_node too
alt
/\
/ \
/ \
alt eps
/\
/ \
/ \
eps eps
4. elseif (child[dir]->is_type(ALT_NODE)) rotate_node too
alt
/\
/ \
/ \
eps alt
/\
/ \
/ \
eps eps
which gets reduced to
alt
/\
/ \
/ \
eps eps
breaking the normalization loop. The degenerate alt node will be caught
in turn when its parent is dealt with.
This needs to be backported to all releases
Closes: https://gitlab.com/apparmor/apparmor/-/issues/398
Fixes: 846cee506 ("Split out parsing and expression trees from regexp.y")
Reported-by: Christian Boltz <apparmor@cboltz.de>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Closes#398
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1252
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: John Johansen <john@jjmx.net>
Expression simplification can get into an infinite loop due to eps
pairs hiding behind and alternation that can't be caught by
normalize_eps() (which exists in the first place to stop a similar
loop).
The loop in question happens in AltNode::normalize when a subtree has
the following structure.
1. elseif (child[dir]->is_type(ALT_NODE)) rotate_node too
alt
/\
/ \
/ \
eps alt
/\
/ \
/ \
alt eps
/\
/ \
/ \
eps eps
2. if (normalize_eps(dir)) results in
alt
/\
/ \
/ \
alt eps
/\
/ \
/ \
alt eps
/\
/ \
/ \
eps eps
3. elseif (child[dir]->is_type(ALT_NODE)) rotate_node too
alt
/\
/ \
/ \
alt alt
/\ /\
/ \ / \
/ \ / \
eps eps eps eps
4. elseif (child[dir]->is_type(ALT_NODE)) rotate_node too
alt
/\
/ \
/ \
eps alt
/\
/ \
/ \
eps alt
/\
/ \
/ \
eps eps
5. if (normalize_eps(dir)) results in
alt
/\
/ \
/ \
alt eps
/\
/ \
/ \
eps alt
/\
/ \
/ \
eps eps
6. elseif (child[dir]->is_type(ALT_NODE)) rotate_node too
alt
/\
/ \
/ \
eps alt
/\
/ \
/ \
alt eps
/\
/ \
/ \
eps eps
back to beginning of cycle
Fix this by detecting the creation of an eps_pair in rotate_node(),
that pair can be immediately eliminated by simplifying the tree in that
step.
In the above cycle the pair creation is caught at step 3 resulting
in
3. elseif (child[dir]->is_type(ALT_NODE)) rotate_node too
alt
/\
/ \
/ \
alt eps
/\
/ \
/ \
eps eps
4. elseif (child[dir]->is_type(ALT_NODE)) rotate_node too
alt
/\
/ \
/ \
eps alt
/\
/ \
/ \
eps eps
whch gets reduces to
alt
/\
/ \
/ \
eps eps
breaking the normalization loop. The degenerate alt node will be caught
in turn when its parent is dealt with.
This needs to be backported to all releases
Closes: https://gitlab.com/apparmor/apparmor/-/issues/398
Fixes: 846cee506 ("Split out parsing and expression trees from regexp.y")
Reported-by: Christian Boltz <apparmor@cboltz.de>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Adding mediation classes in unconfined profiles caused nested profiles
to be mediated, inside a container for example.
As a first step, skip the addition of mediation classes into the dfa.
The creation of unprivileged user namespaces is an exception, where we
always want to mediate it.
Fixes: https://bugs.launchpad.net/apparmor/+bug/2067900
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
technically a # leading a value in an assignment expression is allowed,
however people are also using it to a comment at the end of a line.
ie.
```
@{var1}=value1 # comment about this value or for a given system
```
this unsurprisingly leads to odd/unexpected behavior when the variable
is used.
```
allow rw /@{var1},
```
expands into
```
allow rw /{value1,#,comment,about,this,value,or,for,a,given,system},
```
change a leading # of a value in an assignment expression to a comment.
If the # is really supposed to lead the value, require it to be escaped
or in quotes.
ie.
```
@{var1}=value1 \#not_a_comment
```
Note: this could potentially break som policy if the # was used as the
leading character for a value in an assignment expression, but
is worth it to avoid the confusion.
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1255
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: John Johansen <john@jjmx.net>
The parser writes
sizeof(th)) + th_version + (char)0 + name + (char)0;
but the padding currently is computed as
sizeof(th)) + th_version + name + (char)0;
missing the internal (char)0, add 1 to the pad and fill to ensure
this is correct.
Reported-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Update the state machine readme to better reflect how the chfa is
encoded and works. It still needs a lot more but fixes several errors
in the doc and adds some info about state differential encoding, oobs,
and comb compression.
Signed-off-by: John Johansen <john.johansen@canonical.com>
technically a # leading a value in an assignment expression is allowed,
however people are also using it to a comment at the end of a line.
ie.
@{var1}=value1 # comment about this value or for a given system
this unsurprisingly leads to odd/unexpected behavior when the variable
is used.
allow rw /@{var1},
expands into
allow rw /{value1,#,comment,about,this,value,or,for,a,given,system},
change a leading # as value in an assignment expression to a comment.
If the # is really supposed to lead the value, require it to be escaped
or in quotes.
ie.
@{var1}=value1 \#not_a_comment
Note: this could potentially break som policy if the # was used as the
leading character for a value in an assignment expression, but
is worth it to avoid the confusion.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Similarly to https://gitlab.com/apparmor/apparmor/-/merge_requests/689, use the
global CFLAGS when building Python library, so we honor extra flags set by
distributions, such
as -fstack-protector-strong -fstack-clash-protection -Werror=format-security -fcf-protection.
Spotted by blhc on Debian.
Gbp-Pq: Name Honor-global-CFLAGS-when-building-Python-library.patch
This file contains the same kind of information as @{PROC}/@{pid}/net/route
and both files are world readable:
```
$ ls -l /proc/self/net/*route
-r--r--r-- 1 root root 0 Jun 3 15:33 /proc/self/net/ipv6_route
-r--r--r-- 1 root root 0 Jun 3 15:33 /proc/self/net/route
```
Signed-off-by: Simon Deziel <simon.deziel@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1246
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: Christian Boltz <apparmor@cboltz.de>
This file contains the same kind of information as @{PROC}/@{pid}/net/route
and both files are world readable:
```
$ ls -l /proc/self/net/*route
-r--r--r-- 1 root root 0 Jun 3 15:33 /proc/self/net/ipv6_route
-r--r--r-- 1 root root 0 Jun 3 15:33 /proc/self/net/route
```
Signed-off-by: Simon Deziel <simon.deziel@canonical.com>
aa-remove-unknown doesn't deal properly with profiles that contain
spaces in their names.
Using profile "MongoDB Compass" as an example, awk's sub returns the
number of matches - either 1 or 0 and replaces the actual string ($0)
with the substitution. By accessing the return of sub with $, awk
would be accessing $1 which would return only "MongoDB".
Fix this by using $0 instead of $str.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/395
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Closes#395
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1243
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
In the course of preparing !1207, I found that the validation rules in `profiles/Makefile` did not take kindly to the new `profiles/apparmor/profiles/extras/abstractions/` directory. I tried a couple rounds of quick fixes, but it became clear that the rules as currently written were just not amenable to the new addition, and needed more attention than I could give it by-the-by.
So I separated out that commit, and revised the makefile more thoroughly. The updated rules now rely more on `find(1)` than `$(wildcard)`, and have a number of [what I believe to be] small quality-of-life improvements. Taken together, `make check` passes cleanly with the new files from my other MR present.
One thing I noticed was that the profiles under `apparmor.d/` were not previously being checked for the `include if exists <local/*>` bit---only the ones under `extras/`. I've thus included a fix to the `sbuild-shell` profile, which fortunately was the only one that failed the check.
Note that at present, you'll get a couple of harmless `find: ‘./apparmor/profiles/extras/abstractions’: No such file or directory` errors when running the checks, since that directory won't appear until the other MR is merged. I figure, better to bear that for now, and not have to touch the makefile again later.
NOTE: The CI pipeline here will need to be updated to invoke the `check-local` target instead of `check-extras`. This target was renamed as it is no longer limited in scope to the profiles under `extras/`.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1214
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
aa-remove-unknown doesn't deal properly with profiles that contain
spaces in their names.
Using profile "MongoDB Compass" as an example, awk's sub returns the
number of matches - either 1 or 0 and replaces the actual string ($0)
with the substitution. By accessing the return of sub with $, awk
would be accessing $1 which would return only "MongoDB".
Fix this by using $0 instead of $str.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/395
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Without this patch, aa-remove-unknown uses 'profile_name (unconfined)'
when trying to unload unconfined profiles, which fails for obvious
reasons with (picking a random example)
Removing 'busybox (unconfined)'
/sbin/aa-remove-unknown: line 112: echo: write error: No such file or directory
I propose this patch for 4.0 and master.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1240
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: Georgia Garcia <georgia.garcia@canonical.com>
Without this patch, aa-remove-unknown uses 'profile_name (unconfined)'
when trying to unload unconfined profiles, which fails for obvious
reasons with (picking a random example)
Removing 'busybox (unconfined)'
/sbin/aa-remove-unknown: line 112: echo: write error: No such file or directory
... and tests for it.
This replaces the old code that just stores the full rule as text.
We also get rid of the old ['allow'] and ['deny'] items in
ProfileStorage, the handling of old write functions, and the last usage
of _Raw_Rule (and therefore _Raw_Rule itsself).
Also delete the old test-pivot_root_parse.py which relied on the ancient
code, and even used a wrong syntax in its test rules.
Oh, and aa-logprof can now ask about pivot_root events.
See the individual commits for details.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1232
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: Christian Boltz <apparmor@cboltz.de>
Mount Rules with options in { remount, [make-] { [r]unbindable, [r]shared, [r]private, and [r]slave }} do not support specifying a source. This commit aligns utils implementation to apparmor_parser's, which prohibits having a both source and a destination simultaneously, instad of just prohibiting source.
Therefore, both `mount options=(unbindable) /a,` and `mount options=(unbindable) -> /a,` are now supported (and equivalent for apparmor_parser). However, `mount options=(unbindable) /a -> /b,` is invalid.
For the same reason, specifying a fstype in these cases is also prohibited.
Similarly, we prohibit to specify a fstype for bind mount rules.
Fixes: https://bugs.launchpad.net/ubuntu/+source/apparmor/+bug/2065685
Signed-off-by: Maxime Bélair <maxime.belair@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1236
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: Georgia Garcia <georgia.garcia@canonical.com>
Mount Rules with options in { remount, [make-] { [r]unbindable, [r]shared, [r]private, and [r]slave }} do not support specifying a source. This commit aligns utils implementation to apparmor_parser's, which prohibits having a both source and a destination simultaneously, instad of just prohibiting source.
Therefore, both `mount options=(unbindable) /a,` and `mount options=(unbindable) -> /a,` are now supported (and equivalent for apparmor_parser). However, `mount options=(unbindable) /a -> /b,` is invalid.
For the same reason, specifying a fstype in these cases is also prohibited.
Similarly, we prohibit to specify a fstype for bind mount rules.
Fixes: https://bugs.launchpad.net/ubuntu/+source/apparmor/+bug/2065685
Signed-off-by: Maxime Bélair <maxime.belair@canonical.com>
... for handling pivot_root rules.
This replaces the old code that just stores the full rule as text.
We also get rid of the old ['allow'] and ['deny'] items in
ProfileStorage, the handling of old write functions, and the last usage
of _Raw_Rule (and therefore _Raw_Rule itsself).
Also delete the old test-pivot_root_parse.py which relied on the ancient
code, and even used a wrong syntax in its test rules.
The following exceptions were added to flake8 since they have several
expected uses in the tools and their tests:
E501: Line lengths are recommended to be no greater than 79 characters.
E241: Multiple spaces after ','
W503: Line break occurred before a binary operator
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
ProfileStorage knows a whole profile, therefore it should also include the profile header in `__repr__()`.
Also add a test for this.
While on it, add a test for an invalid type change for a type that doesn't have special handling in `__setitem__()` to increase test coverage.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1233
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: Christian Boltz <apparmor@cboltz.de>
Since musl 1.2.5, basename(3) prototype is only provided in libgen.h
(as mandated by POSIX) and not in strings.h. Also there is a major
difference between the gnu basename and the one defined in libgen.h,
the latter modify the argument string making them incompatible.
Fix this by defining a portable version of basename using strchr.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1234
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: Georgia Garcia <georgia.garcia@canonical.com>
Since musl 1.2.5, basename(3) prototype is only provided in libgen.h
(as mandated by POSIX) and not in strings.h. Also there is a major
difference between the gnu basename and the one defined in libgen.h,
the latter modify the argument string making them incompatible.
Fix this by defining a portable version of basename using strchr.
audit.log entries for mount events don't always include `class=mount`,
but can still be the base for mount rules.
Change logparser.py to also consider `operation=mount` as a mount event.
Actually we already had such a log and profile in our collection
(testcase_mount_01), but since it existed years before MountRule was
implemented, it was excluded in test-libapparmor-test_multi.py.
Therefore we didn't notice that it failed to produce a profile rule when
MountRule was introduced.
Remove testcase_mount_01 from the list of known failures so that it gets
tested - and fix the syntax error in the hand-written
testcase_mount_01.profile.
Also add testcase_mount_02 which is a mount event without fstype,
srcname and class.
I propose this fix for 4.0 and master.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1229
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: Georgia Garcia <georgia.garcia@canonical.com>
audit.log entries for mount events don't always include `class=mount`,
but can still be the base for mount rules.
Change logparser.py to also consider `operation=mount` as a mount event.
Actually we already had such a log and profile in our collection
(testcase_mount_01), but since it existed years before MountRule was
implemented, it was excluded in test-libapparmor-test_multi.py.
Therefore we didn't notice that it failed to produce a profile rule when
MountRule was introduced.
Remove testcase_mount_01 from the list of known failures so that it gets
tested - and fix the syntax error in the hand-written
testcase_mount_01.profile.
Also add testcase_mount_02 which is a mount event without fstype,
srcname and class.
Did some testing on a fresh post-release image of noble, and uncovered some new denials:
#### Xorg
`2024-05-06T19:55:36.782484-04:00 image-ubuntu64 kernel: audit: type=1400 audit(1715039736.765:174): apparmor="DENIED" operation="link" class="file" profile="Xorg" name="/tmp/.X0-lock" pid=1366 comm="Xorg" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 target="/tmp/.tX0-lock"`
#### chromium_browser
`2024-05-06T21:17:09.674963-04:00 image-ubuntu64 kernel: audit: type=1400 audit(1715040834.256:168): apparmor="DENIED" operation="userns_create" class="namespace" profile="chromium_browser" pid=2133 comm="chromium" requested="userns_create" denied="userns_create"`
#### firefox
`2024-05-06T21:33:09.387356-04:00 image-ubuntu64 kernel: audit: type=1400 audit(1715045589.369:505): apparmor="DENIED" operation="userns_create" class="namespace" profile="firefox" pid=3610 comm="firefox" requested="userns_create" denied="userns_create"`
`2024-05-06T21:36:48.911280-04:00 image-ubuntu64 kernel: audit: type=1400 audit(1715045808.884:682): apparmor="DENIED" operation="open" class="file" profile="firefox" name="/sys/fs/cgroup/user.slice/user-1000.slice/session-c2.scope/cpu.max" pid=4348 comm="firefox" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0`
`2024-05-06T21:42:34.152955-04:00 image-ubuntu64 dbus-daemon[1628]: apparmor="DENIED" operation="dbus_bind" bus="session" name="org.mpris.MediaPlayer2.firefox.instance_1_82" mask="bind" pid=4348 label="firefox"`
#### Xorg (second commit)
I neglected to set `abi/4.0` when this went in originally. (I was using the profile on jammy, hence the `3.0`.)
Also, testing on an older laptop that *doesn't* support KMS revealed that Xorg needs some pretty serious permissions then. I've added them in commented-out form, with an explanatory comment. (The `#nokms#` bit is meant to simplify uncommenting those two lines mechanically, e.g. `sed -i 's/#nokms#//'`)
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1227
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: Christian Boltz <apparmor@cboltz.de>
Balena Etcher runs in a degraded sandbox mode when unprivileged userns
is not available. Add an unconfined profile so it's properly
sandboxed.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Shellcheck is complaining that some of the functions are never called,
but they are called from rc.apparmor.functions, causing a false
positive.
This issue only appears in shellcheck version 0.9.0, which is the one
used in ubuntu 24.04, that's why it only failed in the pipeline now.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/388
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Since we are using ubuntu:latest, and noble was released, some tests
are failing.
shellcheck needs python3 to run, which was possibly installed by
default in previous ubuntu images and is no longer the case.
Ignore dist-packages python files during our coverage tests.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/388
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Rename the "check-extras" target to "check-local" as it is no longer
limited to the extra profiles, and also fix a local include in the
sbuild-shell profile so that it passes the newly-applied CI check.
Add a flag that allows setting the error code AppArmor will send when
an operation is denied. This should not be used normally.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
This is a profile to contain the Xorg X11 server, which still runs as root in many scenarios (not least under [LightDM](https://github.com/canonical/lightdm/issues/18)).
I've tested this under every X display manager available in Debian/Ubuntu, as well as plain `startx(1)`. Both rootful and rootless modes are covered. The hardware I've tried this on predominantly uses Intel integrated graphics, with one Nouveau system represented. If someone has an Nvidia GPU running the proprietary driver, that would be a good data point to double-check, owing to the different driver architecture.
As you can see, I avoided going too far into the weeds enumerating everything the X server needs to run. The general pattern I found was that it needs read access to a lot of things, but write access to relatively few.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1075
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
This updates the man page for the recent inet mediation patch.
This is an extension of MR 1202, it adds a patch that changes the anonymous ip address anon to be ip address none which is a better fit.
This patch adds documentation of the recent network changes which extended all network rules to support access permissions, and added address and port matching for inet and inet6 families.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1213
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
inet mediation allows specifying rules for sockets that don't have
a known address, whether because it is unbound or because the
kernel doesn't make the address available.
The current code uses the word anon for anonymous, but that has
proven to be unclear. Switch from using anon to none, to emphasize
that this is a case where there just isn't an address to use as
part of mediation.
Signed-off-by: John Johansen <john.johansen@canonical.com>
When a family is specified in the network rules, we have to make sure
the conditionals match the family. A netlink rule should not be able
to specify ip and port for local and remote (peer) sockets, for example.
When type or protocol is specified in network rules along with inet
conditionals, we should only generate rules for the families that
support those conditionals.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
The bwrap and unshare profiles are special profiles in the same
vein as the unconfined profiles but they actual enforce restrictions
on the applications that are launched.
As such they have come to late in the 4.0 dev cycle to consider enabling
by default. Disable them but ship them so users or distros can easily
enable them.
Signed-off-by: John Johansen <john.johansen@canonical.com>
This adds a bwrap profile to allow it to function on a system with
user namespace restrictions enabled.
The child task of bwrap will enter into a profile without capabilities
thus preventing bwrap from being able to be used to arbitrarily
by-pass user namespace restrictions.
This profile does prevent applications launch with privilege (eg.
sudo bwrap ...) from functioning so it may break some use cases.
Note: The unpriv_bwrap profile is deliberately stacked against the
bwrap profile due to bwraps uses of no-new-privileges.
Fixes: https://bugs.launchpad.net/ubuntu/+source/pageedit/+bug/2046844
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1205
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
This adds a bwrap profile to allow it to function on a system with
user namespace restrictions enabled.
The child task of bwrap will enter into a profile without capabilities
thus preventing bwrap from being able to be used to arbitrarily
by-pass user namespace restrictions.
This profile does prevent applications launch with privilege (eg.
sudo bwrap ...) from functioning so it may break some use cases.
Note: The unpriv_bwrap profile is deliberately stacked against the
bwrap profile due to bwraps uses of no-new-privileges.
Fixes: https://bugs.launchpad.net/ubuntu/+source/pageedit/+bug/2046844
Signed-off-by: John Johansen <john.johansen@canonical.com>
The version of tarball version of firefox downloaded from mozilla.org
installs to /opt/firefox/firefox. Support this location so that the
firefox from the tarball works.
Note this does not support running firefox from the users home directory
in this case the user must update the profile accordingly.
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1203
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
This adds an unshare profile to allow it to function on a system
with user namespace restrictions enabled.
The child task of unshare will enter into a profile without capabilities
thus preventing unshare from being able to arbitrarily being used to
by-pass the user namespace restriction.
This profile does prevent applications launch with privilege (eg.
sudo unshare ...) from functioning so it may break some use cases.
Signed-off-by: John Johansen <john.johansen@canonical.com>
The version of tarball version of firefox downloaded from mozilla.org
installs to /opt/firefox/firefox. Support this location so that the
firefox from the tarball works.
Note this does not support running firefox from the users home directory
in this case the user must update the profile accordingly.
Signed-off-by: John Johansen <john.johansen@canonical.com>
In some cases, ldd might obtain information by executing the given
binary (see ldd(1)) - which is not something we should do on potentially
unknown binaries, especially because aa-genprof and aa-autodep (and
therefore also ldd) are often started as root.
Additionally, the ldd result typically listed libraries already covered
by abstractions/base, which makes the ldd call superfluous.
While on it,
- remove all references to ldd
- remove code only used for calling ldd and handling its results
- remove tests checking ldd results, and the fake_ldd script
- adjust a test where fake_ldd had added some libraries
- remove ldd path from logprof.conf [settings]
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1201
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: Christian Boltz <apparmor@cboltz.de>
- Before this commit, fstype had to match a known fs. However, having and maintaining the exhaustive list of fstypes proved challenging (see !1195 and !1176). Therefore, we add support for any filesystem name.
- Completing AARE support for fstype (brace expressions like ext{3,4} are now supported).
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1198
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: Christian Boltz <apparmor@cboltz.de>
- Before this commit, fstype had to match a known fs. However, having and maintaining the exhaustive list of fstypes proved challenging (see !1195 and !1176). Therefore, we add support for any filesystem name.
- Completing AARE support for fstype (brace expressions like ext{3,4} are now supported).
In some cases, ldd might obtain information by executing the given
binary (see ldd(1)) - which is not something we should do on potentially
unknown binaries, especially because aa-genprof and aa-autodep (and
therefore also ldd) are often started as root.
Additionally, the ldd result typically listed libraries already covered
by abstractions/base, which makes the ldd call superfluous.
While on it,
- remove all references to ldd
- remove code only used for calling ldd and handling its results
- remove tests checking ldd results, and the fake_ldd script
- adjust a test where fake_ldd had added some libraries
- remove ldd path from logprof.conf [settings]
Give access to @{HOMEDIRS}, just like in usr.sbin.smbd, so that
usershares in /home/ can be accessed.
apparmor="DENIED" operation="open" class="file" profile="samba-rpcd-classic" name="/home/user/path/to/usershare/" pid=4781 comm="rpcd_classic" requested_mask="r" denied_mask="r" fsuid=0 ouid=1000
- Adding support for --output-dir in aa-logprof and aa-genprof, allowing to work on profiles without applying the modified version
- Adding support for --allow-all in aa-logprof that creates non-interactively 'allow' rules for all logs
- Adding support for --no-abstraction in aa-logprof and aa-genprof
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1177
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: Christian Boltz <apparmor@cboltz.de>
When the setup of the notify options failed, they were exiting the
program without cleaning up the mqueue. Fix this by returning instead
of exiting, since the main function does the cleanup in case of any
failures. If the test succeeds, then it exits successfully.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
mq_notify only notifies if the queue is empty, so if the sender wins
the race and sends a message before mq_notify is set up, mq_notify
will timeout.
Adding synchronization using pipes the same way it was used in the
setns tests should fix it. The pipe now needs rw permissions, so add
that to the tests.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
The child which sends the message was winning the race and causing a
timeout when the receiver was waiting for the message.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
net_inet makes more sense since other finegrained network types can be
added in the future.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
The abstraction lxc/start-container shipped by the liblxc-common
package uses the following mount rule which was not allowed by our
regexes:
mount options=(rw, make-slave) -> **,
mount options=(rw, make-rslave) -> **,
Since in AppArmor regex ** includes '/' but * by itself doesn't, I'm
adding explicit support for **.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1195
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: Georgia Garcia <georgia.garcia@canonical.com>
The abstraction lxc/start-container shipped by the liblxc-common
package uses the following mount rule which was not allowed by our
regexes:
mount options=(rw, make-slave) -> **,
mount options=(rw, make-rslave) -> **,
Since in AppArmor regex ** includes '/' but * by itself doesn't, I'm
adding explicit support for **.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
The network cmp function was missing the new attributes added, causing
rules to be dropped.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
When the ip is not specified, then we should generate rules for ip
types: anonymous, ipv4 and ipv6. And that's the case for both local
and peer when considering recv and send permissions.
std::ostringstream does not have a copy constructor, that's why in
several places one can see streaming the string of one stream into
another.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
We want to be able to determine label in the future and build the
policy dfa based on its presence or not.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
According to the protocol expected by the kernel, the field
representing the ip size should be an enum instead of the actual ip
size. This is more future-proof.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Before the inet patches, protocol was not handled, so the information
was ignored. This patch introduces the ability to start mediating
protocol.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
We're not trying to execute a command in EXTRA_WARNINGS, so don't try to spawn
a subshell for it which gives:
```
./configure: 14770: EXTRA_WARNINGS: not found
checking whether C compiler accepts -flto-partition=none... yes
```
We can either use ${} or just $ (style). Use $ to be consistent with other
uses in the file.
Signed-off-by: Sam James <sam@gentoo.org>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1184
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
We're not trying to execute a command in EXTRA_WARNINGS, so don't try to spawn
a subshell for it which gives:
```
./configure: 14770: EXTRA_WARNINGS: not found
checking whether C compiler accepts -flto-partition=none... yes
```
We can either use ${} or just $ (style). Use $ to be consistent with other
uses in the file.
Signed-off-by: Sam James <sam@gentoo.org>
Latest pam_unix always runs /usr/sbin/unix_chkpwd instead of reading
/etc/shadow itsself. Add exec permissions to abstraction/authentication.
It also needs to read /proc/@{pid}/loginuid
Also cleanup the now-superfluous rules from the smbd profile.
Fixes: https://bugzilla.opensuse.org/show_bug.cgi?id=1219139
With abstractions/openssl now being included from abstraction/base
(via the indirection of abstractions/crypto) anything already
including abstraction/base can stop including abstractions/openssl
directly.
This is a follow up to 3d1dedfa as suggested by @cboltz
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1179
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: Christian Boltz <apparmor@cboltz.de>
With abstractions/openssl now being included from abstraction/base
(via the indirection of abstractions/crypto) anything already
including abstraction/base can stop including abstractions/openssl
directly.
Administrators might want to define global limits (e.g. disabling
a particular feature) via configuration files, but to make that work
all confined software needs to be allowed to read those files or
otherwise the risk is to silently fall back to internal defaults.
This adds the abstraction already defined for openssl to
abstraction/crypto as it is about cryptography, but also because
abstraction/base includes abstraction/crypto and therefore it will
be allowed in general.
Administrators might want to define global limits (e.g. disabling
a particular feature) via configuration files, but to make that work
all confined software needs to be allowed to read those files or
otherwise the risk is to silently fall back to internal defaults.
This adds the paths usually used by gnutls to abstraction/crypto
as it is about cryptography, but also because abstraction/base
includes abstraction/crypto and therefore it will be allowed
in general.
The error message when autoconf-archive is not installed is not very
intuitive:
```
./configure: line 14422: EXTRA_WARNINGS: command not found
./configure: line 14423: syntax error near unexpected token `-flto-partition=none,'
./configure: line 14423: `AX_CHECK_COMPILE_FLAG(-flto-partition=none, , , -Werror)'
```
So, check if AX_CHECK_COMPILE_FLAG is defined and if not, complain
that autoconf-archive is missing.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1174
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
The permission for network rules when the inet mediation was not
available, or for when the family was not af_inet or af_inet6 was
being generated as one that would allow anything. Make them specific
using perms.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
The layout for AF_INET and AF_INET6 rules were being applied to all
families, which causes failures in their mediation.
Fixes: ddefe11a ("parser: add fine grained conditionals to network rule")
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
- replace example calls of /etc/init.d/apparmor with apparmor.service
- drop /etc/init.d/apparmor in filelist
- replace /var/lib/apparmor/ with /var/cache/apparmor/
The error message when autoconf-archive is not installed is not very
intuitive:
./configure: line 14422: EXTRA_WARNINGS: command not found
./configure: line 14423: syntax error near unexpected token `-flto-partition=none,'
./configure: line 14423: `AX_CHECK_COMPILE_FLAG(-flto-partition=none, , , -Werror)'
So, check if AX_CHECK_COMPILE_FLAG is defined and if not, complain
that autoconf-archive is missing.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
* **MountRule: sync flags_keywords with parser code**
... based on /mount.cc mnt_opts_table
Several keywords and aliases were missing in flags_keywords:
- B
- M
- make-private
- make-rprivate
- make-rshared
- make-rslave
- make-runbindable
- make-shared
- make-slave
- make-unbindable
- r
- R
- read-only
- w
Also sort the keywords in the same order as in mount.cc.
Note: AARE handling is still a TODO.
After that, update the list of known parsing failures:
- several valid profiles are now correctly parsed
- some `"make-*" mount opt and an invalid src` bad profiles are no
longer detected as being invalid
* **test-mount.py: fix MountRule instance creation**
If fstype or options is a str, it has to be exactly one keyword, because
\__init__() / check_and_split_list() won't parse a str.
Our "normal" code already honors this, and only hands over fstype and
options as sets or a single-keyword str.
However, a few tests (wrongly) handed over a str that would need further
parsing. Adjust the tests to no longer do this.
* **MountRule: check for unknown fstype and options**
... now that the previous commits fixed issues that ended up as unknown
keywords.
Also add mount/ok_12.sd as known-failing test. It uses fstype=AARE which
MountRule doesn't support (yet?).
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1169
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: Georgia Garcia <georgia.garcia@canonical.com>
* Fix writing 'mount {options,fstype} in ...' rules
We need spaces around the 'in' keyword.
Also add some tests for this.
* Make error check more readable
* MountRule: make get_clean() more readable
... by getting rid of two mostly-identical, big return statements.
Also add tests for bare umound and remount rules to ensure full test
coverage.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1168
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: Georgia Garcia <georgia.garcia@canonical.com>
... now that the previous commits fixed issues that ended up as unknown
keywords.
Also add mount/ok_12.sd as known-failing test. It uses fstype=AARE which
MountRule doesn't support (yet?).
If fstype or options is a str, it has to be exactly one keyword, because
__init__() / check_and_split_list() won't parse a str.
Our "normal" code already honors this, and only hands over fstype and
options as sets or a single-keyword str.
However, a few tests (wrongly) handed over a str that would need further
parsing. Adjust the tests to no longer do this.
... based on /mount.cc mnt_opts_table
Several keywords and aliases were missing in flags_keywords:
- B
- M
- make-private
- make-rprivate
- make-rshared
- make-rslave
- make-runbindable
- make-shared
- make-slave
- make-unbindable
- r
- R
- read-only
- w
Also sort the keywords in the same order as in mount.cc.
Note: AARE handling is still a TODO.
After that, update the list of known parsing failures:
- several valid profiles are now correctly parsed
- some `"make-*" mount opt and an invalid src` bad profiles are no
longer detected as being invalid
Now that we have MountRule and MountRuleset, drop the old "just store
the whole rule" code for mount rules.
Also drop some old tests that used that "store the whole mount rule"
code, and adjust the regex_matches tests to import the regex directly
from apparmor.regex.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1165
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: Christian Boltz <apparmor@cboltz.de>
If /proc/filesystems contains a filesystem that is not listed in
MountRule valid_fs, print a useful error message that says what exactly
is going on, instead of only saying "False is not True".
Now that we have MountRule and MountRuleset, drop the old "just store
the whole rule" code for mount rules.
Also drop some old tests that used that "store the whole mount rule"
code, and adjust the regex_matches tests to import the regex directly
from apparmor.regex.
A simple rule without conditionals need to be generated for when the
kernel does not support fine grained inet network mediation.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
By not having quotes in $@, the string splits by the whitespace.
That prevents us from checking if the parser supports rules
that have spaces in them.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Options available are ip= and port= inside the peer group or outside,
representing local addresses and ports:
network peer=(ip=127.0.0.1 port=8080),
network ip=::1 port=8080 peer=(ip=::2 port=8081),
The 'ip' option supports both IPv4 and IPv6. Examples would be
ip=192.168.0.4, or ip=::578d
The 'port' option accepts a 16-bit unsigned integer. An example would
be port=1234
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Nautilus uses user namespaces to load thumbnails, hence it needs an
unconfined profile when user namespaces are restricted from unconfined
like other applications in MR #1123
Although nautilus has extensions that would allow opening a terminal
from the nautilus interface, they do not inherit nautilus' AppArmor
label, therefore the use of unconfined does not allow arbitrary use of
unprivileged user namespaces using the nautilus label.
https://gitlab.com/apparmor/apparmor/-/merge_requests/1123
In addition this serves as a handle to uniquely identify them instead
of unconfined to peers in policy.
Note that unconfined mode should be changed for default_allow when
https://gitlab.com/apparmor/apparmor/-/merge_requests/1109 is merged.
Fixes: https://bugs.launchpad.net/bugs/2047256
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
This commit add fixes for issues found in coverity's snapshot 70858.
- CID 323127: Performance inefficiencies (COPY_INSTEAD_OF_MOVE)
- CID 323125: Uninitialized members (UNINIT_CTOR)
I'm also removing Novell, Inc. from the copyright notice added by a
copy-paste error, and an unused variable left over from debugging.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Precompile each filter regex with re.compile so they don't need to be
recompiled for each log message when using re.match directly.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
aa-unconfined can fault if it looses the race between checkking if
proc/*/attr/{apparmor/,}current exists, and actually opening the file.
Catch open/file errors and ignore them like the file doesn't exist.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/355
Signed-off-by: John Johansen <john.johansen@canonical.com>
Allow notification filtering of the fields profile, operation, name,
denied_mask, net_family and net_socket using regex. Both command line
and config options in notify.conf are available.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
The tests for aa-notify that were related to the last login were
assuming that the machine had been logged in at least once in the last
30 days, but that might not be the case.
Update the test to check for the last login date and update the test
logs considering that value.
Fixes: https://bugs.launchpad.net/bugs/1939022
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Failures on regex and exec are related to /usr/bin and /bin merge.
The userns failure is related to the addition of the unprivileged_userns
profile and the kernel ability to transition to it when an unconfined
unprivileged user namespace is created.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1146
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
The short form of the help parameter was not accepting an optional
argument as described in the help message. Update the help message to
remove the extra whitespace in between -h and the options since
getopt(1) says that
"If the option has an optional argument, it must be written directly
after the option character if present."
even though that's not described in getopt(3).
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
The help message from aa-status referenced -h filter when it should
have been -h filters. Also added some whitespaces for consistency.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
element-desktop needs to use user namespaces, hence it needs an unconfined profile when user namespaces are restricted from unconfined
like other applications in MR #1123!1123
In addition this serves as a handle to uniquely identify them instead
of unconfined to peers in policy.
Note that unconfined mode should be changed for default_allow when
!1109
is merged.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1150
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: Georgia Garcia <georgia.garcia@canonical.com>
There is a kernel feature, available under
namespaces/userns_create/pciu&, that enables the transition of
unconfined tasks to a special profile called unprivileged_userns when
they try to create an unprivileged user namespace with
clone/unshare. This transition allows the creation of the unprivileged
user namespace but hinders its privileges by not allowing
capabilities. Refer to the unprivileged_userns profile to check what
rules are allowed.
If either the feature is not present in the kernel, or the
unprivileged_userns profile is not loaded, then the defined behavior
is to deny the creation of the unprivileged user namespace
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Some of the tests are failing because of /usr/bin/true vs /bin/true.
Similarly to what was done in 8c09b328, to make the tests more
reliable, copy the true binary to $tmpdir and use this path on the
tests instead.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Unprivileged user namespace creation is allowed an will result in a
transition into the unprivileged_userns profile. The
unprivileged_userns profile with then deny all capabilities within the
profile. Execution of applications is allowed within the
unprivileged_userns profile but, they will result in a stack with the
unprivileged_userns profile, that is to say the unprivileged_userns
profile can not be dropped (capabilities can not be gained).
If the unprivileged_userns profile does not exist, unprivileged user
namespace creation is denied as before.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
/proc/$pid/cmdline can be changed by an application, therefore escape it
before printing.
The program name in /proc/$pid/exe can also contain any characters
(except \0 and shashes) and needs escaping.
Note: repr() wraps the string into single quotes, which we have to
remove to avoid changing the output format.
The test program from issue 364 now gets displayed as
28443 /path/to/issue364 (/\x1b]0;X\x07) not confined
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/364
I propose this patch for 2.13..master
Closes#364
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1142
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
The call aa_getpeercon() can return ENOPROTOOPT error in some cases, specifically when the kernel lacks 'fine grained unix mediation'. Currently, this capability isn't available in upstream kernels, but only in patched ones (for example, the regular Ubuntu kernels). Unfortunately, the manpage lacks this info. This patch fixes this.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/366
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1143
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
/proc/$pid/cmdline can be changed by an application, therefore escape it
before printing.
The program name in /proc/$pid/exe can also contain any characters
(except \0 and shashes) and needs escaping.
Note: repr() wraps the string into single quotes, which we have to
remove to avoid changing the output format.
The test program from issue 364 now gets displayed as
28443 /path/to/issue364 (/\x1b]0;X\x07) not confined
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/364
There are some tests like attach_disconnected and posix_mq that can
have a program that calls another. For example, posix_mq_rcv calls
posix_mq_snd. Both of them write to the same output file, but the code
that checks the result expects only one line. This change enables
checking multiple lines in the output file and passing or failing
accordingly.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1140
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
There are some tests like attach_disconnected and posix_mq that can
have a program that calls another. For example, posix_mq_rcv calls
posix_mq_snd. Both of them write to the same output file, but the code
that checks the result expects only one line. This change enables
checking multiple lines in the output file and passing or failing
accordingly.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
The move_mount tests were returning -1 in case of failure causing it
to become 255 in some systems, but checktestbg in the testsuite
considers any return value greater than 128 to be a signal error.
That would cause tests that should fail to display the following test
error:
... was expected to 'fail'. Reason for failure 'killed by
signal 127'
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1139
Approved-by: Steve Beattie <steve+gitlab@nxnw.org>
Merged-by: Georgia Garcia <georgia.garcia@canonical.com>
The move_mount tests were returning -1 in case of failure causing it
to become 255 in some systems, but checktestbg in the testsuite
considers any return value greater than 128 to be a signal error.
That would cause tests that should fail to display the following test
error:
... was expected to 'fail'. Reason for failure 'killed by
signal 127'
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Instead of ignoring all exec events that happen in a hat/child profile,
only disallow child exec. ix and px are valid options inside a hat and
are now offered to the user.
(When the tools support nested child profiles one day, we can even allow
child exec again.)
[This MR is for master only. I opened separate MRs for 3.1 and 3.0]
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1133
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: Georgia Garcia <georgia.garcia@canonical.com>
the stacking tests need to be able to read and write the new apparmor
dir in proc, if that interface has been selected. Update the tests to
make sure they have the permissions needed.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Instead of ignoring all exec events that happen in a hat/child profile,
only disallow child exec. ix and px are valid options inside a hat and
are now offered to the user.
(When the tools support nested child profiles one day, we can even allow
child exec again.)
Add support for a default_allow mode that facillitates writing profiles
in that allow everything by default. This is not normally recomended
but fascilitates creating basic profiles while working to transition
policy away from unconfined.
This mode is being added specifically to replace the use of the
unconfined flag in these transitional profiles as the use of unconfined
in policy is confusing and does not reflect the semantics of what is
being done.
Generally the goal for policy should be to remove all default_allow
profiles once the policy is fully developed.
Note: this patch only adds parsing of default_allow mode. Currently
it sets the unconfined flag to achieve default allow but this
prevents deny rules from being applied. Once dominance is fixed a
subsequent patch will transition default_allow away from using
the unconfined flag.
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1109
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Happy holidays, been meaning to push these updates out for some time:
* Add `owner` keyword to several rules to tighten them up. I've tested these for several months in normal usage and encountered no denials;
* Add new DBus access rules for the following:
```
Oct 18 06:26:06 darkstar kernel: [4369444.223230] audit: type=1107 audit(1697624766.349:2448): pid=745 uid=102 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_signal" bus="system" path="/org/freedesktop/login1" interface="org.freedesktop.DBus.Properties" member="PropertiesChanged" name=":1.1" mask="receive" pid=1484746 label="firefox" peer_pid=773 peer_label="unconfined"
Oct 19 19:18:20 darkstar kernel: [4502177.573224] audit: type=1107 audit(1697757500.040:2456): pid=745 uid=102 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/login1" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.1" pid=1677547 label="firefox" peer_pid=773 peer_label="unconfined"
Oct 19 19:18:20 darkstar kernel: [4502177.700071] audit: type=1107 audit(1697757500.168:2457): pid=745 uid=102 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/timedate1" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.5878" pid=1484746 label="firefox" peer_pid=1677582 peer_label="unconfined"
```
* Deny write access to `/etc/**`, due to this odd bit:
```
Jul 27 15:23:21 darkstar kernel: [6530015.183715] audit: type=1400 audit(1690485801.308:128963): apparmor="DENIED" operation="mknod" profile="firefox" name="/etc/igfx_user_feature_next.txt" pid=2618266 comm="vaapitest" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
```
* Allow read access to a cgroup `cpu.max` variable. I lost the relevant log bit here, I'm afraid;
* Relocate the ptrace rule, as it relates to the crash reporter, not (as far as I've found) the Widevine plugin.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1131
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
man apparmor_parser gives examples for the --warn command line option as
apparmor_parser --warn=rules-not-enforced ...
and
apparmor_parser --warn=no-rules-not-enforced ...
but the actual --warn options are rule-not-enforced / no-rule-not-enforced
(without s)
Fixes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1057453
Given the following profile:
profile foo {
profile bar {
profile baz {
}
}
}
The parser would correctly serialize the "foo" profile and the
"foo//bar" profile, but it would incorrectly name "bar//baz" when it
should be "foo//bar//baz". This would cause issues loading the profile
in certain kernels causing a "parent does not exist" error.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1127
Merged-by: John Johansen <john@jjmx.net>
Given the following profile:
profile foo {
profile bar {
profile baz {
}
}
}
The parser would correctly serialize the "foo" profile and the
"foo//bar" profile, but it would incorrectly name "bar//baz" when it
should be "foo//bar//baz". This would cause issues loading the profile
in certain kernels causing a "parent does not exist" error.
Partially addresses #346.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
The recently added unconfined profiles use the binary name for the
local include instead of the profile name. Switch to using the
profile name for the local include.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Add support for a default_allow mode that facillitates writing profiles
in that allow everything by default. This is not normally recomended
but fascilitates creating basic profiles while working to transition
policy away from unconfined.
This mode is being added specifically to replace the use of the
unconfined flag in these transitional profiles as the use of unconfined
in policy is confusing and does not reflect the semantics of what is
being done.
Generally the goal for policy should be to remove all default_allow
profiles once the policy is fully developed.
Note: this patch only adds parsing of default_allow mode. Currently
it sets the unconfined flag to achieve default allow but this
prevents deny rules from being applied. Once dominance is fixed a
subsequent patch will transition default_allow away from using
the unconfined flag.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Adding profiles for applications even if they allow all operations
will allow them to be referenced as peer by other policies. This is
a step towards a more comprehensive system policy, adding names,
instead of just unconfined, to peers of existing policy and to
applications that are known to use unprivileged user namespaces.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1123
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
When the regex parser failed, the Chars objects created/used in rules
charset and cset_chars would not be cleaned up properly and would
leak.
Closes#361
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Adding profiles for applications even if they allow all operations
will allow them to be referenced as peer by other policies. This is a
step towards a more comprehensive system policy, adding names, instead
of just unconfined, to peers of existing policy and to applications
that are known to use unprivileged user namespaces.
Note that unconfined mode should be changed for default_allow
when https://gitlab.com/apparmor/apparmor/-/merge_requests/1109 is
merged.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
upstream kernels only have network_v8 unfortunately the tcp tests were
only being run against kernels that had network (which is v7). Kernels
that support both (Ubuntu) would be tested against v8, so v8 has been
tested but pure upstream kernels were failing to be tested correctly.
This patch will only make sure one of the supported verserions are
tested. This is determined by the parser which prefers v8. In the
future the tests need to be extended to run the tests against all
kernel supported versions.
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1120
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: John Johansen <john@jjmx.net>
upstream kernels only have network_v8 unfortunately the tcp tests were
only being run against kernels that had network (which is v7). Kernels
that support both (Ubuntu) would be tested against v8, so v8 has been
tested but pure upstream kernels were failing to be tested correctly.
This patch will only make sure one of the supported versions are
tested. This is determined by the parser which prefers v8. In the
future the tests need to be extended to run the tests against all
kernel supported versions.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Teach CapabilityRule about the list of known capabilities, and ensure that only valid capabilities are allowed in profiles.
This comes with several test additions (and removals from the `exception_not_raised` list for the parser simple_tests), see the individual commits for details.
Reviewing each commit on its own is probably easier than reading the merged diff.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1117
Merged-by: John Johansen <john@jjmx.net>
Even if this is very unlikely to happen (because of the previously added
test, and because CapabilityRule only allows to specify known severity
keywords), ensure proper behaviour if an unknown severity gets rated.
- convert a string parameter to a list to avoid duplication of the
validation logic
- add separate check for empty cap_list
- remove check for empty strings - the previous commit already added
such a check to the for loop. Also, move the comment to that check.
... and error out if an unknown capability is given.
This also means recognizing bad capabilities in the parser simple_tests
now works (so remove these from the exception_not_raised list), and that
we can no longer hand over an unknown capability in test-capability.py
to test their severity.
... instead of non-existing ones.
This is a search-and-replace commit:
ptrace -> sys_ptrace
chgrp -> fowner (because fowner wasn't used in the test before)
Out of the box the KDE plasma-browser-integration package does not work
after a user installed the corresponding Firefox extension: The browser
can't start the native host binary. The same is probably true for
Chromium.
This was originally reported to KDE at https://bugs.kde.org/show_bug.cgi?id=397399
tools.py contained quite some things that need a big cleanup.
See the individual commits for details and more readable diffs.
Note: This MR "only" does cleanups and some refactoring. It does not change the (user-visible) behaviour of the code.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1114
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
This also means we can get rid of most cleanprof-specific conditions
without changing the behaviour (because the other functions don't use
'profile' yet).
Also hand over prof_filename to clean_profile() so that it doesn't need
to find it out itsself.
Before, the 'profile' return value was either a profile name or a
profile filename, depending on the active module (cleanprof vs.
everything else).
Separate the return values so that it's clear what we get.
Notes:
- This commit doesn't change functionality, only the number of return
values and some variable names.
- There's no guarantee that all return values are set. They can also be
None. (This might change in the future.)
Also adjust the callers of get_next_to_profile(), and rename 'profile'
to 'prof_filename' in calling functions that actually use the profile
filename.
This needed replacement of "program" with "profile" at various places in
tools.py (of course this description is over-simplified).
The changes in get_next_to_profile() (which is used by several aa-*
minitools) are restricted to cleanprof to avoid side effects in the
other aa-* minitools.
However, the other aa-* minitools possibly also suffer from problems
with named profiles, but checking and fixing that is left for another
commit ;-)
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/351
.
The fix needs an additional function in ProfileList (`profile_from_attachment()`) to get the profile name for a given attachment.
Since this is not very different from filename_from_attachment(), move
most of the code into a thing_from_attachment() function, and make
{profile,filename}_from_attachment wrappers for it.
Also adjust the tests to the changed internal data structure, and add
tests for profile_from_attachment().
I propose this patch for 3.0..master. (3.0 will probably need a slightly different patch - I'll submit a separate MR once this MR is merged.)
Closes#351
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1108
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
This needed replacement of "program" with "profile" at various places in
tools.py (of course this description is over-simplified).
The changes in get_next_to_profile() (which is used by several aa-*
minitools) are restricted to cleanprof to avoid side effects in the
other aa-* minitools.
However, the other aa-* minitools possibly also suffer from problems
with named profiles, but checking and fixing that is left for another
commit ;-)
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/351
... to get the profile name for a given attachment.
Since this is not very different from filename_from_attachment(), move
most of the code into a thing_from_attachment() function, and make
{profile,filename}_from_attachment wrappers for it.
Also adjust the tests to the changed internal data structure, and add
tests for profile_from_attachment().
Extend the policy syntax to have a rule that allows specifying all
permissions for all rule types.
allow all,
This is useful for making blacklist based policy, but can also be
useful when combined with other rule prefixes, eg. to add audit
to all rules.
audit access all,
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1103
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Extend the policy syntax to have a rule that allows specifying all
permissions for all rule types.
allow all,
This is useful for making blacklist based policy, but can also be
useful when combined with other rule prefixes, eg. to add audit
to all rules.
audit access all,
Signed-off-by: John Johansen <john.johansen@canonical.com>
This lays the ground work for fine grained network mediation. The switch to using the rules class brings the advantages of shared infrastructure and is needed for tracking all the different combinations possible with finer control.
In addition range generation and support for large numbers (needed for ipv6) are added. This patchset does not make policy visible changes to network rules.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1104
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Since network rules don't use the "perms" attribute, it is using the
dedup class in which duplicate rules are removed.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
There is one significant difference in the encoding of the network
rules. Before this change, when the parser was encoding a "network,"
rule, it would generate an entry for every family and every
type/protocol. After this patch the parser should generate an entry
for every family, but the type/protocol is changed to .. in the pcre
syntax. There should be no difference in behavior.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
using dfprintf for error messages subjects them to the other
output controls and can cause them to be surpressed when they
shouldn't.
Instead use a dedicated error function and add a quiet flag to
allow silencing errors.
Signed-off-by: John Johansen <john.johansen@canonical.com>
By default aa-status outputs with --verbose enabled - if --json is also
specified then aa-status would currently output in its first line "apparmor
module is loaded.":
aa-status --json | head -n1
apparmor module is loaded.
And only after this the actual json output would follow. This then results in
failures to parse this JSON output:
aa-status --json | jq .
parse error: Invalid numeric literal at line 1, column 9
This in turn then breaks tools / tests which expect the output of aa-status
--json to be purely json - e.g:
https://salsa.debian.org/apparmor-team/apparmor-profiles-extra/-/blob/debian/unstable/debian/tests/policy-is-loaded#L12
So ensure dprintf() etc do not output when --json is specified to restrict the
output of aa-status to pure JSON.
Signed-off-by: Alex Murray <alex.murray@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1097
Approved-by: Seth Arnold <seth.arnold@gmail.com>
Merged-by: John Johansen <john@jjmx.net>
coverity is reporting an overrun of the profile_mode_table
217 if (merge_profile_mode(mode, rhs.mode) == MODE_CONFLICT)
>>> CID 322989: (OVERRUN)
>>> Overrunning array "profile_mode_table" of 6 8-byte elements at element index 6 (byte offset 55) using index "this->mode" (which evaluates to 6).
this is because it is being indexed by the profile_mode enum which can
go up to a 6th entry. The code tests for MODE_CONFLICT before using
the table so it shouldn't trigger a bug today, but play it safe for
the future and also get rid of the coverity scan error by adding a
"conflict" entry to the mode_table.
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1098
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: John Johansen <john@jjmx.net>
SIGNAL makes more sense because it's about a single signal.
Besides that, a9494f5523 introduced a (at
that point broken) usage of SIGNAL which becomes valid with this commit.
coverity is reporting an overrun of the profile_mode_table
217 if (merge_profile_mode(mode, rhs.mode) == MODE_CONFLICT)
>>> CID 322989: (OVERRUN)
>>> Overrunning array "profile_mode_table" of 6 8-byte elements at element index 6 (byte offset 55) using index "this->mode" (which evaluates to 6).
this is because it is being indexed by the profile_mode enum which can
go up to a 6th entry. The code tests for MODE_CONFLICT before using
the table so it shouldn't trigger a bug today, but play it safe for
the future and also get rid of the coverity scan error by adding a
"conflict" entry to the mode_table.
Signed-off-by: John Johansen <john.johansen@canonical.com>
This adds two new profile flags
* `interruptible` which can be used with prompt
* `kill.signal=XXX` which can be used to set the signal used by kill mode or the kill rule prefix
In addition it adds a few cleanups and fixes around profile flag handling
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1096
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: John Johansen <john@jjmx.net>
Add a flag that allows setting the signal used to kill the process.
This should not be normally used but can be very useful when
debugging applications, interaction with apparmor.
Signed-off-by: John Johansen <john.johansen@canonical.com>
When merging flags with a disconnected_path specified, there is no
check for a conflict and we can just throw away (and leak) one of
the paths.
Signed-off-by: John Johansen <john.johansen@canonical.com>
We have a basic flagvals class it makes sense to move the parser
code into it, to help make management easier going forward.
Signed-off-by: John Johansen <john.johansen@canonical.com>
By default aa-status outputs with --verbose enabled - if --json is also
specified then aa-status would currently output in its first line "apparmor
module is loaded.":
aa-status --json | head -n1
apparmor module is loaded.
And only after this the actual json output would follow. This then results in
failures to parse this JSON output:
aa-status --json | jq .
parse error: Invalid numeric literal at line 1, column 9
This in turn then breaks tools / tests which expect the output of aa-status
--json to be purely json - e.g:
https://salsa.debian.org/apparmor-team/apparmor-profiles-extra/-/blob/debian/unstable/debian/tests/policy-is-loaded#L12
So ensure dprintf() etc do not output when --json is specified to restrict the
output of aa-status to pure JSON.
Signed-off-by: Alex Murray <alex.murray@canonical.com>
ask_exec() and ask_addhat() set
hashlog[aamode][full_profile]['final_name'].
While this was used to get profile and hat split, it was not used as key
for log_dict. This resulted in entries like
log_dict['PERMITTING']['foo//null-/usr/bin/cat']
which are obviously wrong.
Use final_name as log_dict key so that we end up with (assuming child
exec was selected)
log_dict['PERMITTING']['foo///usr/bin/cat']
This fixes a regression introduced in 3.1. Due to other changes in collapse_log() done in master, picking this into 3.1 isn't that easy. I'll submit a separate patch for 3.1.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1091
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Ideally we'd update them to the chosen exec target - but until this is
implemented, it doesn't make sense to ask about adding a //null-* peer
to a profile.
I propose this patch for all branches.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1090
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
setns tests part of the userns could fail if the parent process opened
the child pipe to write it was done before the child opened the pipe
with read permissions.
From the fifo(7) man page:
A process can open a FIFO in nonblocking mode. In this case, opening
for read‐only succeeds even if no one has opened on the write side yet
and opening for write‐only fails with ENXIO (no such device or
address) unless the other end has already been opened.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1093
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
setns tests part of the userns could fail if the parent process opened
the child pipe to write it was done before the child opened the pipe
with read permissions.
From the fifo(7) man page:
A process can open a FIFO in nonblocking mode. In this case, opening
for read‐only succeeds even if no one has opened on the write side yet
and opening for write‐only fails with ENXIO (no such device or
address) unless the other end has already been opened.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Now that we have `final_name` as shortcut for
`hashlog[aamode][full_profile]['final_name']`, update the code that used
the long version to make it more readable.
ask_exec() and ask_addhat() set
hashlog[aamode][full_profile]['final_name'].
While this was used to get profile and hat split, it was not used as key
for log_dict. This resulted in entries like
log_dict['PERMITTING']['foo//null-/usr/bin/cat']
which are obviously wrong.
Use final_name as log_dict key so that we end up with (assuming child
exec was selected)
log_dict['PERMITTING']['foo///usr/bin/cat']
Ideally we'd update them to the chosen exec target - but until this is
implemented, it doesn't make sense to ask about adding a //null-* peer
to a profile.
On (terribly, but real-world) slow buid hosts, running test-logprof.py
fails with a timeout. Increase the timeout so that even those build
hosts get enough time to finish the aa-logprof tests.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1087
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
On (terribly, but real-world) slow buid hosts, running test-logprof.py
fails with a timeout. Increase the timeout so that even those build
hosts get enough time to finish the aa-logprof tests.
Currently you need to use attach_disconnected with
attach_disconnected.path=XXX to be able to attach to a different
location than / whic is ugly and redundant.
Make it so attach_disconnected.path implies attach_disconnected.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Add support for specifying the path prefix used when attach disconnected
is specified. The kernel supports prepending a different value than
/ when a path is disconnected. Expose through a profile flag.
Signed-off-by: John Johansen <john.johansen@canonical.com>
... and a simple test for a single (fake) event for ping.
Notes:
- to let aa-logprof work in the CI environment, we need to skip checking
for the AppArmor mountpoint. Introduce --no-check-mountpoint for this.
- PYTHONPATH and LD_LIBRARY_PATH need to be explicitely forwarded when
starting aa-logprof via subprocess.Popen()
- if the test runs with coverage enabled, it will also start aa-logprof
with coverage (parameters copied from Makefile).
Speaking about coverage - this test adds 4% overall coverage, and 10%
more coverage for apparmor/aa.py.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1082
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
... and a simple test for a single (fake) event for ping.
Notes:
- to let aa-logprof work in the CI environment, we need to skip checking
for the AppArmor mountpoint. Introduce --no-check-mountpoint for this.
- PYTHONPATH and LD_LIBRARY_PATH need to be explicitely forwarded when
starting aa-logprof via subprocess.Popen()
- if the test runs with coverage enabled, it will also start aa-logprof
with coverage (parameters copied from Makefile).
Speaking about coverage - this test adds 4% overall coverage, and 10%
more coverage for apparmor/aa.py.
(except the deprecated tunables/sys)
This allows users to extend variables without editing the main tunables
files.
It also allows to cleanly introduce new tunable files (via
tunables/global.d) and new aliases (via tunables/alias.d).
Note: some files already had `include <tunables/$FILE.d>`. These get
changed to `include if exists`, and the comments for these includes get
unified.
Also extend make check to ensure that all tunables include tunables/$FILE.d
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/347
I propose this patch for 3.0..master.
Closes#347
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1077
Approved-by: timeout
Merged-by: Christian Boltz <apparmor@cboltz.de>
Allow for the default libexec subdir, /usr/libexec/dovecot, as well
as the more common /usr/lib/dovecot.
Signed-off-by: Peter Levine <plevine457@gmail.com>
The permissions for AA_NET_OPT need to be bounded by mask so we can
make sure it matches when a policy specified only setopt or only
getopt. This was causing failures on the regression tests
unix_socket_pathname, unix_socket_abstract, unix_socket_unnamed and
unix_socket_autobind
Fixes: 44f3be091 ("parser: convert the stored audit from a bit mask to a bool")
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1079
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
The permissions for AA_NET_OPT need to be bounded by mask so we can
make sure it matches when a policy specified only setopt or only
getopt. This was causing failures on the regression tests
unix_socket_pathname, unix_socket_abstract, unix_socket_unnamed and
unix_socket_autobind
Fixes: 44f3be091 ("parser: convert the stored audit from a bit mask to a bool")
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Add a json_log option (default: disabled) to logprof.conf that enables
logging of all aa-logprof and aa-genprof input and output to a
/tmp/aa-jsonlog-* file.
This can be useful for debugging, and maybe also to create tests that do
a full aa-logprof run.
This patch introduces a minor behaviour change if aa-logprof errors out
on startup (for example if the config file is broken or the parser can't
be found):
Before:
```
$ aa-logprof --json
{"dialog": "apparmor-json-version","data": "2.12"}
ERROR: Can't find apparmor_parser at /sbin/apparmor_parser
```
After:
```
$ aa-logprof --json
ERROR: Can't find apparmor_parser at /sbin/apparmor_parser
```
Note that the json version line will not be printed if aa-logprof or
aa-genprof error out that early.
If there are no startup errors, the behaviour will not change.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1078
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Minor fixes for the firefox profile:
1. The attachment spec was failing to match `/usr/lib/firefox-esr/firefox-esr` on Debian;
2. The `Mounted` method of `org.gtk.vfs.MountTracker` is received, not sent.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1076
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Add a json_log option (default: disabled) to logprof.conf that enables
logging of all aa-logprof and aa-genprof input and output to a
/tmp/aa-jsonlog-* file.
This can be useful for debugging, and maybe also to create tests that do
a full aa-logprof run.
This patch introduces a minor behaviour change if aa-logprof errors out
on startup (for example if the config file is broken or the parser can't
be found):
Before:
```
$ aa-logprof --json
{"dialog": "apparmor-json-version","data": "2.12"}
ERROR: Can't find apparmor_parser at /sbin/apparmor_parser
```
After:
```
$ aa-logprof --json
ERROR: Can't find apparmor_parser at /sbin/apparmor_parser
```
Note that the json version line will not be printed if aa-logprof or
aa-genprof error out that early.
If there are no startup errors, the behaviour will not change.
(except the deprecated tunables/sys)
This allows users to extend variables without editing the main tunables
files.
It also allows to cleanly introduce new tunable files (via
tunables/global.d) and new aliases (via tunables/alias.d).
Note: some files already had `include <tunables/$FILE.d>`. These get
changed to `include if exists`, and the comments for these includes get
unified.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/347
It appears that lto1 does not support -dynamic, and that ld no longer
documents -dynamic. Which results in the following build failure
when usine lto1 for link time optimizations
```
[ 45s] libtool: link: gcc -shared -fPIC -DPIC .libs/grammar.o .libs/libaalogparse.o .libs/kernel.o .libs/scanner.o .libs/private.o .libs/features.o .libs/kernel_interface.o .libs/policy_cache.o .libs/PMurHash.o -flto-partition=none -O2 -fstack-protector-strong -flto=auto -dynamic -Wl,--version-script=../src/libapparmor.map -flto=auto -pthread -Wl,-soname -Wl,libapparmor.so.1 -o .libs/libapparmor.so.1.17.0
[ 45s] lto1: warning: unrecognized gcc debugging option: y
[ 45s] lto1: warning: unrecognized gcc debugging option: n
[ 45s] lto1: warning: unrecognized gcc debugging option: m
[ 45s] lto1: warning: unrecognized gcc debugging option: i
[ 45s] lto1: warning: unrecognized gcc debugging option: c
```
Switch to -Bdynamic which is documented.
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1071
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: John Johansen <john@jjmx.net>
The test to check if the kernel supports a feature covers two cases:
1. The file/directory indicates a feature is supported.
2. The feature is supported if it's in the contents of the file.
When the intended check is for case 1, and the file does not exist,
then the code checks if it's case 2, but since it was not supposed to
be, we end up grepping a directory, causing an error message. Fix this
by checking if we're grepping a file.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1074
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
The test to check if the kernel supports a feature covers two cases:
1. The file/directory indicates a feature is supported.
2. The feature is supported if it's in the contents of the file.
When the intended check is for case 1, and the file does not exist,
then the code checks if it's case 2, but since it was not supposed to
be, we end up grepping a directory, causing an error message. Fix this
by checking if we're grepping a file.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
This reverts commit 460c3d5b59.
The 4.0 ABI was pinned for the development cycle but it can cause
in-tree uses of parser/parser.conf to fail if it cannot find the 4.0
file in /etc/apparmor.d/abi/.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
It appears that lto1 does not support -dynamic, and that ld no longer
documents -dynamic. Which results in the following build failure
when usine lto1 for link time optimizations
[ 45s] libtool: link: gcc -shared -fPIC -DPIC .libs/grammar.o .libs/libaalogparse.o .libs/kernel.o .libs/scanner.o .libs/private.o .libs/features.o .libs/kernel_interface.o .libs/policy_cache.o .libs/PMurHash.o -flto-partition=none -O2 -fstack-protector-strong -flto=auto -dynamic -Wl,--version-script=../src/libapparmor.map -flto=auto -pthread -Wl,-soname -Wl,libapparmor.so.1 -o .libs/libapparmor.so.1.17.0
[ 45s] lto1: warning: unrecognized gcc debugging option: y
[ 45s] lto1: warning: unrecognized gcc debugging option: n
[ 45s] lto1: warning: unrecognized gcc debugging option: m
[ 45s] lto1: warning: unrecognized gcc debugging option: i
[ 45s] lto1: warning: unrecognized gcc debugging option: c
Switch to -Bdynamic which is documented.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Add tests for passing the parser a file that doesn't exist, a symlink
to a file that doesn't exist, and a directory that contains that
latter. Also include tests for different levels of -j passed as an
argument. These tests are based on the fixing commit 1259319508
("parser: Fix parser failing to handle errors when setting up work")
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1070
Signed-off-by: Steve Beattie <steve.beattie@canonical.com>
Approved-by: John Johansen <john@jjmx.net>
Instead of pushing the cmp logic for rule merging into each rule
class make it the default behavior for the perms_rule_t parent class.
Also save off the original perms for the merged rule.
For classes that don't want perms merging add an alternate
dedup_perms_rule_t clase.
Signed-off-by: John Johansen <john.johansen@canonical.com>
speedup and reduce memory usage of dfa generation
A variety of changes to improve dfa generation
- By switching to Nodevec instead of Node sets we can reduce memory usage slightly and reduce code
- By using charsets for chars we reduce code and increase chances of node merging/reduction which reduces memory usage slightly
- By merging charsets we reduce the number of nodes
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1066
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
By changing the compare function from each rule to use class_rule_t,
instead of perms_rule_t, we temporarily ignore if permissions are
different. If every rule attribute is the same, then the permissions
can be merged. This is done at the perms_rule_t's level.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1068
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
By changing the compare function from each rule to use class_rule_t,
instead of perms_rule_t, we temporarily ignore if permissions are
different. If every rule attribute is the same, then the permissions
can be merged. This is done at the perms_rule_t's level.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Currently File rules are the only rules that have rule dedup/merging performed. Extend support for rule merging to all other rule types.
This can result in a small performance regression when rules can not be merged/deduped but can result in a large performance increase when lots of rules can be eliminated.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1065
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: John Johansen <john@jjmx.net>
Instead of having multiple tables, since we have room post split
of optimization and dump flags just move all the optimization and
dump flags into a common table.
We can if needed switch the flag entry size to a long in the future.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Add the ability to control whether rule merging is done.
TODO: in the furture cleanup display of flags split accross two tables
Signed-off-by: John Johansen <john.johansen@canonical.com>
In preparation for more flags (not all of the backend dfa based),
rework the optimization and dump flag handling which has been exclusively
around the dfa up to this point.
- split dfa control and dump flags into separate fields. This gives more
room for new flags in the existing DFA set
- rename DFA_DUMP, and DFA_CONTROL to CONTROL_DFA and DUMP_DFA as
this will provide more uniform naming for none dfa flags
- group dump and control flags into a structure so they can be passed
together.
Signed-off-by: John Johansen <john.johansen@canonical.com>
this is reuired because af_rule merging does not take into account
the potential af_unix addresses and could incorrectly merge af_unix
rules.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Currently only file rules get merged. Finish adding basic support
for rule merging and make the default the behavior to dedup
merge rules that are exact matches.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Compiling of io_uring tests fail if liburing-dev is not installed.
Also, the tests were not running as part of the test suite.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
In MR #1063 the tests/regression/apparmor/syscall.sh script was updated to
account for kernel lockdown, but the capabilities.sh script also exercises these
system calls so this also needs to be updated as well.
Also required to fix issue #226.
Signed-off-by: Alex Murray <alex.murray@canonical.com>
When kernel lockdown is enabled the ioperm and iopl tests will fail regardless
since lockdown prevents these syscalls before AppArmor has a chance to mediate
them. So workaround this by detecting when lockdown is enabled and expect the
tests to fail in that case.
Fixes issue #226.
Signed-off-by: Alex Murray <alex.murray@canonical.com>
Closes#226
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1063
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
When kernel lockdown is enabled the ioperm and iopl tests will fail regardless
since lockdown prevents these syscalls before AppArmor has a chance to mediate
them. So workaround this by detecting when lockdown is enabled and expect the
tests to fail in that case.
Fixes issue #226.
Signed-off-by: Alex Murray <alex.murray@canonical.com>
character sets are just a way of enumerating to exact match rules
more succinctly, so loosen the exact match check to allow them.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Allowing access to a debug flag can greatly improve policy debugging.
This is different than the debug mode of old, that was removed. It only
will trigger additional messages to the kernel ring buffer, not
the audit log, and it does not change mediation.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Begin preparing policy for the 4.0 release. This may result in new
denials. This is expected and needed to make sure policy is ready
for the 4.0 release.
Signed-off-by: John Johansen <john.johansen@canonical.com>
I have a number of updates for the Firefox profile, based on monitoring AppArmor logs in the course of my own usage.
I'm going to try annotating the diff with the appropriate log messages, to see if that is a useful way of documenting the changes.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1055
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Dir "d" is not closed when asprintf fails.
Found by coverity: CID 321416: Resource leaks (RESOURCE_LEAK)
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
The check isn't correct, it should be checking for capability
MAC_ADMIN, but in the future that won't be correct either. Instead
rely on the kernel to check permission to load policy, which it alread
does as it is possible to by-pass the parser to load policy.
Also improve the error message when the kernel does deny
loading policy due to failed permission checks.
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1044
Approved-by: Seth Arnold <seth.arnold@gmail.com>
Merged-by: John Johansen <john@jjmx.net>
The check isn't correct, it should be checking for capability
MAC_ADMIN, but in the future that won't be correct either. Instead
rely on the kernel to check permission to load policy, which it alread
does as it is possible to by-pass the parser to load policy.
Also improve the error message when the kernel does deny
loading policy due to failed permission checks.
Signed-off-by: John Johansen <john.johansen@canonical.com>
aa-load is a tool that loads cached (compiled) policies into
the kernel. It can receive as argument a file, a cache directory
containing the hash subtree, and a directory containing cached
files directly underneath - no hash.
This tool can be used in the as a guide for other init
systems to load the cached policies directly.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/770
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
This Fixes coverity CID 254463: Memory - illegal accesses (USE_AFTER_FREE)
which was introduced in 35e58273 / https://gitlab.com/apparmor/apparmor/-/merge_requests/713 (merged)
The coverity report it self is wrong because while the pointer use is
after free. It is deliberately a pointer comparison to see if the
value was pointing to proc_attr_base_old. This is not actually
problematic as far as it goes. However it does surface a bug in the
logic, and regardless if it is allowed doing a post-free pointer
comparison like this will confuse static checkers and humans alike.
procattr_path() will never return proc_attr_base_old, it will return a
copy of it (if it did return it, we couldn't free it). So the test tmp
!= proc_attr_base_old is bad, in that it will always be true even if
tmp was a copy of proc_attr_base_old.
Fix this by makint tmp auto free, and switching to a string comparison.
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1042
Aked-by: time-out
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1048
made it so rules like
mount slave /snap/bin/** -> /**,
mount /snap/bin/** -> /**,
would get passed into change_mount_type rule generation when they
shouldn't have been. This would result in two different errors.
1. If kernel mount flags were present on the rule. The error would
be caught causing an error to be returned, causing profile compilation
to fail.
2. If the rule did not contain explicit flags then rule would generate
change_mount_type permissions based on souly the mount point. And
the implied set of flags. However this is incorrect as it should
not generate change_mount permissions for this type of rule. Not
only does it ignore the source/device type condition but it
generates permissions that were never intended.
When used in combination with a deny prefix this overly broad
rule can result in almost all mount rules being denied, as the
denial takes priority over the allow mount rules.
Fixes: https://bugs.launchpad.net/apparmor/+bug/2023814
Fixes: https://bugzilla.opensuse.org/show_bug.cgi?id=1211989
Fixes: 9d3f8c6cc ("parser: fix parsing of source as mount point for propagation type flags")
Fixes: MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1048
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1054
Signed-off-by: John Johansen <john.johansen@canonical.com>
(cherry picked from commit 86d193e183)
Signed-off-by: John Johansen <john.johansen@canonical.com>
This Fixes coverity CID 254463: Memory - illegal accesses (USE_AFTER_FREE)
which was introduced in 35e58273 / https://gitlab.com/apparmor/apparmor/-/merge_requests/713 (merged)
The coverity report it self is wrong because while the pointer use is
after free. It is deliberately a pointer comparison to see if the
value was pointing to proc_attr_base_old. This is not actually
problematic as far as it goes. However it does surface a bug in the
logic, and regardless if it is allowed doing a post-free pointer
comparison like this will confuse static checkers and humans alike.
procattr_path() will never return proc_attr_base_old, it will return a
copy of it (if it did return it, we couldn't free it). So the test tmp
!= proc_attr_base_old is bad, in that it will always be true even if
tmp was a copy of proc_attr_base_old.
Fix this by makint tmp auto free, and switching to a string comparison.
Signed-off-by: John Johansen <john.johansen@canonical.com>
... so that each change in master gets scanned (until we reach the scan
limit).
This will give us more timely results than only scanning the coverity
branch whenever someone manually updates it.
I have been testing the `usr.sbin.sshd` profile with the [three "for internal-sftp" rules](ad3750058d/profiles/apparmor/profiles/extras/usr.sbin.sshd (L138-140)) commented out, as they are quite broad. This has turned up a few oversights, a couple of which have been fixed in abstractions. This MR brings in the missing rules that don't currently seem to have a better place to go, and addresses a couple of other minor issues in the profile.
Here are the associated syslog messages:
```
Jun 8 21:09:11 testvm kernel: [ 28.211637] audit: type=1400 audit(1686272951.369:66): apparmor="DENIED" operation="sendmsg" profile="/usr/sbin/sshd" name="/run/systemd/notify" pid=830 comm="sshd" requested_mask="w" denied_mask="w" fsuid=0 ouid=0
Jun 9 00:27:24 testvm kernel: [10846.886139] audit: type=1400 audit(1686284844.516:1268): apparmor="DENIED" operation="mkdir" profile="/usr/sbin/sshd" name="/home/username/.cache/" pid=5815 comm="sshd" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
Jun 9 00:28:57 testvm kernel: [10940.152625] audit: type=1400 audit(1686284937.780:1337): apparmor="DENIED" operation="mknod" profile="/usr/sbin/sshd" name="/home/username/.cache/motd.legal-displayed" pid=5979 comm="sshd" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
```
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1051
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: Christian Boltz <apparmor@cboltz.de>
Found in testing a slimmed-down `usr.sbin.sshd` profile:
```
Jun 8 21:09:38 testvm kernel: [ 54.847014] audit: type=1400 audit(1686272978.009:68): apparmor="DENIED" operation="open" profile="/usr/sbin/sshd" name="/sys/kernel/mm/transparent_hugepage/hpage_pmd_size" pid=1035 comm="sshd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
```
Not sure what glibc/system call uses this, but it seems pretty broadly applicable, and read access is presumably harmless. [THP reference](https://www.kernel.org/doc/html/latest/admin-guide/mm/transhuge.html)
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1050
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
/etc/ld-musl-*.path is required to perform dynamic linking on musl libc.
The wildcard is to match all CPU architectures, like x86_64.
type=AVC msg=audit(1686087677.497:67): apparmor="DENIED" operation="open" class="file" profile="syslog-ng" name="/etc/ld-musl-x86_64.path" pid=25866 comm="syslog-ng" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
Closes#333
Signed-off-by: Nikita Romaniuk <kelvium@yahoo.com>
Closes#333
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1047
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Before 300889c3a, mount rules would compile policy when using source
as mount point for rules that contain propagation type flags, such as
unbindable, runbindable, private, rprivate, slave, rslave, shared, and
rshared. Even though it compiled, the rule generated would not work as
expected.
This commit fixes both issues. It allows the usage of source as mount
point for the specified flags, albeit with a deprecation warning, and
it correctly generates the mount rule.
The policy fails to load when both source and mount point are
specified, keeping the original behavior (reference
parser/tst/simple_tests/mount/bad_opt_10.sd for example).
Fixes: https://bugs.launchpad.net/bugs/1648245
Fixes: https://bugs.launchpad.net/bugs/2023025
It should be backported to versions 2.13, 3.0, 3.1.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1048
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Before 300889c3a, mount rules would compile policy when using source
as mount point for rules that contain propagation type flags, such as
unbindable, runbindable, private, rprivate, slave, rslave, shared, and
rshared. Even though it compiled, the rule generated would not work as
expected.
This commit fixes both issues. It allows the usage of source as mount
point for the specified flags, albeit with a deprecation warning, and
it correctly generates the mount rule.
The policy fails to load when both source and mount point are
specified, keeping the original behavior (reference
parser/tst/simple_tests/mount/bad_opt_10.sd for example).
Fixes: https://bugs.launchpad.net/bugs/1648245
Fixes: https://bugs.launchpad.net/bugs/2023025
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
/etc/ld-musl-*.path is required to perform dynamic linking on musl libc.
The wildcard is to match all CPU architectures, like x86_64.
type=AVC msg=audit(1686087677.497:67): apparmor="DENIED" operation="open" class="file" profile="syslog-ng" name="/etc/ld-musl-x86_64.path" pid=25866 comm="syslog-ng" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
Closes#333
Signed-off-by: Nikita Romaniuk <kelvium@yahoo.com>
When opening snap browsers with evince using the snap_browsers
abstraction, we get the following AppArmor denials which prevent the
browsers from opening
audit: type=1400 audit(1685996894.479:225): apparmor="DENIED" operation="open" class="file" profile="/usr/bin/evince//snap_browsers" name="/var/lib/snapd/inhibit/firefox.lock" pid=13282 comm="snap" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1685997517.142:259): apparmor="DENIED" operation="file_lock" class="file" profile="/usr/bin/evince//snap_browsers" name="/var/lib/snapd/inhibit/firefox.lock" pid=14200 comm="snap" requested_mask="k" denied_mask="k" fsuid=1000 ouid=0
This MR should be cherry-picked into 2.13, 3.0, 3.1
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1045
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: Georgia Garcia <georgia.garcia@canonical.com>
When opening snap browsers with evince using the snap_browsers
abstraction, we get the following AppArmor denials which prevent the
browsers from opening
audit: type=1400 audit(1685996894.479:225): apparmor="DENIED" operation="open" class="file" profile="/usr/bin/evince//snap_browsers" name="/var/lib/snapd/inhibit/firefox.lock" pid=13282 comm="snap" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1685997517.142:259): apparmor="DENIED" operation="file_lock" class="file" profile="/usr/bin/evince//snap_browsers" name="/var/lib/snapd/inhibit/firefox.lock" pid=14200 comm="snap" requested_mask="k" denied_mask="k" fsuid=1000 ouid=0
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
If `else if (preprocess_only)` is true, the more strict condition
`else if (!include_file && preprocess_only)` won't be reached if it gets
checked after the shorter condition.
Exchange the two sections so that both code paths can be reached.
Fixes coverity CID 312499: Control flow issues (DEADCODE)
In some cases (if profiles in complain and enforce mode are loaded), the
`i` loop runs more than once, which also means `j == 0` is true in the
middle of the json. This causes invalid json.
This patch fixes this.
This is a regression related to 22aa9b6161
/ https://gitlab.com/apparmor/apparmor/-/merge_requests/964 /
https://gitlab.com/apparmor/apparmor/-/issues/295
which fixed another case of invalid json if a process was unconfined
while having a profile defined.
Note: I also tested this patch for the "unconfined, but has a profile
defined" case to ensure it doesn't break what
22aa9b6161 fixed.
Enhance aa-status by adding posix regex filter support and support for new modes
this MR adds the following command line options
```
--show={profiles,processes,all}
--count
--filter.mode=filter
--filter.processs=filter
--filter.profiles=filter
--filter.pid=filter
```
Where currently filters use the basic posix regexs, do we want to go with extended regex, or apparmor globbing
An example of using the new filters
```
$ sudo ./aa-status --filter.exe="firefox" --show=processes
apparmor module is loaded.
65 processes have profiles defined.
25 processes are in enforce mode.
/snap/firefox/2605/usr/lib/firefox/firefox (4406) snap.firefox.firefox
/snap/firefox/2605/usr/lib/firefox/firefox (4686) snap.firefox.firefox
/snap/firefox/2605/usr/lib/firefox/firefox (4721) snap.firefox.firefox
/snap/firefox/2605/usr/lib/firefox/firefox (4826) snap.firefox.firefox
/snap/firefox/2605/usr/lib/firefox/firefox (19204) snap.firefox.firefox
/snap/firefox/2605/usr/lib/firefox/firefox (19206) snap.firefox.firefox
/snap/firefox/2605/usr/lib/firefox/firefox (23159) snap.firefox.firefox
/snap/firefox/2605/usr/lib/firefox/firefox (23195) snap.firefox.firefox
/snap/firefox/2605/usr/lib/firefox/firefox (23292) snap.firefox.firefox
/snap/firefox/2605/usr/lib/firefox/firefox (30929) snap.firefox.firefox
/snap/firefox/2605/usr/lib/firefox/firefox (31487) snap.firefox.firefox
/snap/firefox/2605/usr/lib/firefox/firefox (31528) snap.firefox.firefox
/snap/firefox/2605/usr/lib/firefox/firefox (71708) snap.firefox.firefox
/snap/firefox/2605/usr/lib/firefox/firefox (2271631) snap.firefox.firefox
/snap/firefox/2605/usr/lib/firefox/firefox (2271969) snap.firefox.firefox
/snap/firefox/2605/usr/lib/firefox/firefox (2272030) snap.firefox.firefox
/snap/firefox/2605/usr/lib/firefox/firefox (2272347) snap.firefox.firefox
/snap/firefox/2605/usr/lib/firefox/firefox (2654995) snap.firefox.firefox
/snap/firefox/2605/usr/lib/firefox/firefox (2655042) snap.firefox.firefox
/snap/firefox/2605/usr/lib/firefox/firefox (2655082) snap.firefox.firefox
/snap/firefox/2605/usr/lib/firefox/firefox (2655152) snap.firefox.firefox
/snap/firefox/2605/usr/lib/firefox/firefox (2655237) snap.firefox.firefox
/snap/firefox/2605/usr/lib/firefox/firefox (2656215) snap.firefox.firefox
/snap/firefox/2605/usr/lib/firefox/firefox (2656334) snap.firefox.firefox
/snap/firefox/2605/usr/lib/firefox/firefox (2657837) snap.firefox.firefox
0 processes are in complain mode.
0 processes are in prompt mode.
0 processes are in kill mode.
0 processes are unconfined but have a profile defined.
0 processes are in mixed mode.
```
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1016
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: John Johansen <john@jjmx.net>
Bring in updates and improvements that have been made to the Chromium profile at `apparmor-profiles/ubuntu/20.04/usr.bin.chromium-browser`.
The changes are largely as follows:
* Use `@{pid}` or `@{tid}` instead of `[0-9]*`
* Use the discrete `lsb_release` profile instead of a subprofile
* Add a few additional libraries to the `sandbox` subprofile
Once this is in, the Chromium profiles in `apparmor-profiles` can be considered deprecated, and I would advise slating them for removal altogether.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1032
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: John Johansen <john@jjmx.net>
`unscd` is a drop-in replacement for `nscd` that uses the same binary location (`/usr/sbin/nscd`) and config file (`/etc/nscd.conf`). The `usr.sbin.nscd` profile only needs one additional permission to support it.
```
May 9 18:07:42 darkstar kernel: [ 2706.138823] audit: type=1400
audit(1683670062.580:839): apparmor="DENIED" operation="sendmsg"
profile="nscd" name="/run/systemd/notify" pid=4343 comm="nscd"
requested_mask="w" denied_mask="w" fsuid=125 ouid=0
```
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1031
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: Christian Boltz <apparmor@cboltz.de>
The mount options MS_LAZYTIME and MS_NOSYMFOLLOW were added in
kernels 4.0 and 5.10, respectively. Update the mount test script
and helper to skip testing those options if they are not available.
Signed-off-by: Jon Tourville <jon.tourville@canonical.com>
To emphasize that the
--mode
--processs
--profiles
--pid
options are filters rename them to
--filter.mode
--filter.processs
--filter.profiles
--filter.pid
Signed-off-by: John Johansen <john.johansen@canonical.com>
Add the basic infrastructure for adding regex based filters and
allow filtering process and profiles by mode based on a user supplied
filter.
Signed-off-by: John Johansen <john.johansen@canonical.com>
So that the user can control the set of data being shown add a --show
flag. Currently it allows showing
all
profiles
processes
Signed-off-by: John Johansen <john.johansen@canonical.com>
In preparation for new options and controls, split detailed_output()
into detailed_profiles() and detailed_processes() and This switch the
output processing to one larger pass that uses option flags.
This doesn't change current behavior and is in not as clean as the
current code for the current option set. However it will allow us to
easily add new options in one place and have them apply correctly
every where.
Signed-off-by: John Johansen <john.johansen@canonical.com>
The unix network tests are not being run on a v8 network capable kernel. Under v8 there needs to be some adjustments to the tests because unix rules get downgraded to the socket rule ```network unix,``` which does not have the same set of conditionals or fine grained permissions, meaning some tests that would fail under af_unix (like missing permission tests) will pass under v8 network rules.
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/893
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: John Johansen <john@jjmx.net>
This patch adds the following mount options: 'nostrictatime',
'lazytime', and 'nolazytime'.
The MS_STRICTATIME mount flag already existed, and 'nostrictatime' was
listed along with 'strictatime' in the comments of parser/mount.cc, so
this patch adds a mapping for 'nostrictatime' to clear MS_STRICTATIME.
Additionally, the Linux kernel includes the 'lazytime' option with
MS_LAZYTIME mapping to (1<<25), so this patch adds MS_LAZYTIME to
parser/mount.h and the corresponding mappings in parser/mount.cc for
'lazytime' and 'nolazytime'.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1005
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
The conflicting flags value message was hard to read
conflicting flag value = lazytimenolazytime
change it to
conflicting flag values = lazytime, nolazytime
Signed-off-by: John Johansen <john.johansen@canonical.com>
Adds the corresponding `MS_NOSYMFOLLOW` flag to parser/mount.h as well,
defined as (1 << 8) just as in the util-linux and the kernel.
Signed-off-by: Oliver Calder <oliver.calder@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
This patch adds the following mount options: 'nostrictatime',
'lazytime', and 'nolazytime'.
The MS_STRICTATIME mount flag already existed, and 'nostrictatime' was
listed along with 'strictatime' in the comments of parser/mount.cc, so
this patch adds a mapping for 'nostrictatime' to clear MS_STRICTATIME.
Additionally, the Linux kernel includes the 'lazytime' option with
MS_LAZYTIME mapping to (1<<25), so this patch adds MS_LAZYTIME to
parser/mount.h and the corresponding mappings in parser/mount.cc for
'lazytime' and 'nolazytime'.
Signed-off-by: Oliver Calder <oliver.calder@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Make it so the output options that count profiles and processes can
be output to a file.
This does not add a user option to do so
Signed-off-by: John Johansen <john.johansen@canonical.com>
For detailed output split up where output is going from whether json
is being produced.
This also allows none json output to go to a file.
Signed-off-by: John Johansen <john.johansen@canonical.com>
When the replacement regex for multiple qualifiers matches, the
capture group variables ($1, $2, etc) are overwritten to match the
most recent regex. Since there are no capture groups in the 's/,/ /g'
regex, then $2 was empty, causing an error on policy generation.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
The chfa equivalence class shouldn't be a reference. Its needs to
actually exist and be part of the class during later method calls.
As a reference it leads to bad references when used later.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Historically, if you create a `profile foo /bin/foo` with aa-logprof (by
choosing "named exec"), it will be saved as `/etc/apparmor.d/profile_foo`
This patch drops the `profile_` filename prefix so that the filename
will be `/etc/apparmor.d/foo`
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1014
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
The parser front end is inconsistent about how it handles permissions and rules. This makes extending the permission set and fixing inconsistencies between say file and af_unix rules difficult and prone to failures.
This is a set of work to cleanup the frontend parse handling, and middle semantic checks, dedup, and processing of rules and their permissions. It also is starting to lay the ground work for the parser retaining more information to output better error, and debug messages.
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/802
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: John Johansen <john@jjmx.net>
Historically, if you create a `profile foo /bin/foo` with aa-logprof (by
choosing "named exec"), it will be saved as `/etc/apparmor.d/profile_foo`
This patch drops the `profile_` filename prefix so that the filename
will be `/etc/apparmor.d/foo`
When a user choooses to execute to a named profile (not: named child),
make sure to get the profile filename in the correct way to avoid a
crash.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/314
This is used by various applications including libreoffice etc so it may as well
be added to the base abstraction along with the existing zoneinfo DB access.
AVC apparmor="DENIED" operation="open" class="file" profile="snap.libreoffice.calc" name="/usr/share/zoneinfo-icu/44/le/zoneinfo64.res" pid=44742 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
Signed-off-by: Alex Murray <alex.murray@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1007
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: Christian Boltz <apparmor@cboltz.de>
This is used by various applications including libreoffice etc so it may as well
be added to the base abstraction along with the existing zoneinfo DB access.
AVC apparmor="DENIED" operation="open" class="file" profile="snap.libreoffice.calc" name="/usr/share/zoneinfo-icu/44/le/zoneinfo64.res" pid=44742 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
Signed-off-by: Alex Murray <alex.murray@canonical.com>
The description of @{etc_ro} and @{etc_rw} were not good enough in
explaining which directories they should contain, and when to use which
of the variables in a profile.
I propose this patch for all branches.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1000
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Probably thanks to O_MAYEXEC, denials for file access can now contain a
mix of x (exec) and other file permissions.
The actual exec should appear in a separate "exec" log event, therefore
ignore 'x' in file events for now if it's mixed with other permissions.
Note that file events ("open", "link" etc.) that contain denied_mask="x"
without another permission will still cause an error. (So far, this
hasn't been seen in the wild.)
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/303
Also add the log line from the bugreport and the (for now) expected
result as test_multi testcase.
I propose this patch for all branches.
Closes#303
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1001
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
The code for add_local_entry is actually currently unused and will
have to change anyways by the time it is. Some drop it and the
associated variables.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Another step towards having a block rule and retaining parsed rule
structure. Setup the parse to use a common block pattern, that when
we are ready will become an actual rule.
Signed-off-by: John Johansen <john.johansen@canonical.com>
In preparation for file rules and rule duplication removal add
flags to rule_t with the first flag indicating if the rule is
deleted.
We do this instead of actually deleting the rule so we can hold
on to the rule for debug and printing output in the future.
Signed-off-by: John Johansen <john.johansen@canonical.com>
in preparation for file rules switching to rule_t add a method to
indicate whether a particular rule is mergeable/dedupable.
Whether a rule merges or dedups will be up to the rules comparison
and merge methods.
Signed-off-by: John Johansen <john.johansen@canonical.com>
In preparation for rule comparison and elemination have each rule
carry a type that can be used as the base of comparison. The
rule class is folded into this type.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Instead of having each rule individually handle the class info
introduce a class_rule_t into the hierarchy and consolidate.
Signed-off-by: John Johansen <john.johansen@canonical.com>
The post_process() method is misnamed, it fires when the profile is
finished parsing but fires before variable expansion. Rename it
to better reflect what it does and move the trigger code into
profile as a start of cleaning this stage up.
Also document the order the hooks fire in
Signed-off-by: John Johansen <john.johansen@canonical.com>
The previous patch enable the prefix based rules all to use the
same code pattern. Group them together
Signed-off-by: John Johansen <john.johansen@canonical.com>
Cleanup the parse code by making shared prefix and perms classes for
rules and convert rules to use them.
Signed-off-by: John Johansen <john.johansen@canonical.com>
This removes the struct wrapper used in the previous patch to ensure
that all uses are properly converted.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Audit control support is going to be extended to support allowing
policy to which rules should quiet auditing. Update the frontend
internals to prepare for this.
Signed-off-by: John Johansen <john.johansen@canonical.com>
This removes the struct wrapper used in the previous patch to ensure
that all uses are properly converted.
Signed-off-by: John Johansen <john.johansen@canonical.com>
This delays the convertion of the audit flag until passing to the
backend. This is a step towards fix the parser front end so that it
doesn't use encoded permission mappings.
Note: the patch embedds the bool conversion into a struct to ensure
the compiler will fail to build unless every use is fixed. The
struct is removed in the following patch.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Update (most of the) code and inline comments/docstrings to follow
https://peps.python.org/pep-0008/ so that future maintenance is slightly
easier.
Continue to keep long lines as splitting them does not always improve
the code readability.
Probably thanks to O_MAYEXEC, denials for file access can now contain a
mix of x (exec) and other file permissions.
The actual exec should appear in a separate "exec" log event, therefore
ignore 'x' in file events for now if it's mixed with other permissions.
Note that file events ("open", "link" etc.) that contain denied_mask="x"
without another permission will still cause an error. (So far, this
hasn't been seen in the wild.)
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/303
Also add the log line from the bugreport and the (for now) expected
result as test_multi testcase.
Make mount permission set consistent with the other rule types. This
is a step towards refactoring.
Signed-off-by: John Johansen <john.johansen@canonical.com>
This is a step towards restructuring how "audit" is handled so we
can add quiet support and push mapping of audit bits later.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Move from using and int for permissions bit mask to a perms_t type.
Also move any perms mask that uses the name mode to perms to avoid
confusing it with other uses of mode.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Recent work on the parser has surfaced missing header dependencies
and other issues. Cleanup up and simplify the dependencies so it
is harder to break them.
Signed-off-by: John Johansen <john.johansen@canonical.com>
This is a partial fix for CVE-2016-1585, it address the frontend rule encoding problems particularly
- Permissions being given that shouldn't happen
- Multiple option conditionals in a single rule resulting in wider permission instead of multiple rules
- optional flags not being handled correctly
- multiple backend rules being created out of one frontend rule when they shouldn't be
it does not address the backend issue of short cut permissions not being correctly updated when deny rules carve out permissions on an allow rule that has a short cut permission in the encoding.
Thanks to the additional work by Alexander Mikhalitsyn for beating this MR into shape so we can land it
Alexander Changelog:
- rebased to an actual tree
- addressed review comments from @wbumiller and @setharnold
- fixed compiler warnings about class_mount_hdr is uninitialized
- infinite loop fix
- MS_MAKE_CMDS bitmask value fixed
- fixed condition in `gen_flag_rules` to cover cases like `mount options in (bind) /d -> /4,` when flags are empty and only opt_flags are present
- marked some tests as a FAIL case behavior was changed after `parser: add conflicting flags check for options= conditionals` commit
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/333
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
The description of @{etc_ro} and @{etc_rw} were not good enough in
explaining which directories they should contain, and when to use which
of the variables in a profile.
These tests contains incompatible mount options and broken
after ("parser: add conflicting flags check for options= conditionals")
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Acked-by: John Johansen <john.johansen@canonical.com>
gen_flag_rules has a boolean vs bit and case where parenthesis are
helpful to express the intended order of operations.
It also doesn't handle the case where there are no matches. Fix this
by causing that case to fail.
also improve the debug of option extraction.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Now that flag processing for mount rules with single option
conditionals are fixed e-enable multiple mount conditionals on a
single mount rule. The mount conditionals are equivalent to specifying
multiple rules.
mount options=(a,b,c) options=(c,d),
is the same as
mount options=(a,b,c),
mount options=(c,d),
and
mount options in (a,b,c) options in (c,d),
is the same as
mount options in (a,b,c),
mount options in (c,d),
when multiple options= and options in are combined in a single rule
it is the same as the cross product of the options.
where
mount options=(a,b,c) options in (d,e),
is a single rule.
mount options=(a,b,c) options=(d,e) options in (f),
is equivalent to
mount options=(a,b,c) options in (f),
mount options=(d,e) options in (f),
and while it is not recommended that multiple options= and options in
conditions be used in a single rule.
mount options=(a,b,c) options=(d,e) options in (f) options in (g),
is equivalent to
mount options=(a,b,c) options in (f),
mount options=(a,b,c) options in (g),
mount options=(d,e) options in (f),
mount options=(d,e) options in (g),
Bug Link: https://bugs.launchpad.net/apparmor/+bug/1597017
Signed-off-by: John Johansen <john.johansen@canonical.com>
- rebased to bba1a023bf
- fixed infinite loop in mnt_rule::gen_policy_re
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Acked-by: John Johansen <john.johansen@canonical.com>
The combined optional flag and exact match flag processing is problematic
separate out the optional flag processing so it is only combined during
match string generation.
While doing so we fix the flag output so that multiple rules are
not output when they shouldn't be.
In addition we temporarily break multiple options= and 'options in'
conditionals in a single rule, which we will fix in a separate patch.
Bug Link: https://bugs.launchpad.net/apparmor/+bug/1597017
Signed-off-by: John Johansen <john.johansen@canonical.com>
- rebased to bba1a023bf
- made tests happy by changing condition in gen_policy_re()
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Acked-by: John Johansen <john.johansen@canonical.com>
Do a minimal code refactoring (ie. no functional changes, just moving
code,adding boiler plate and glue) in preparation to fix
bug https://bugs.launchpad.net/apparmor/+bug/1597017
Bug Link: https://bugs.launchpad.net/apparmor/+bug/1597017
Signed-off-by: John Johansen <john.johansen@canonical.com>
- rebased to bba1a023bf
- fixed compiler warnings:
<built-in>: In member function ‘int mnt_rule::gen_policy_new_mount(Profile&, int&, unsigned int, unsigned int)’:
<built-in>: note: by argument 1 of type ‘const char*’ to ‘long unsigned int __builtin_strlen(const char*)’ declared here
mount.cc:880:14: note: ‘class_mount_hdr’ declared here
880 | char class_mount_hdr[64];
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Acked-by: John Johansen <john.johansen@canonical.com>
dbus 1.14.4 changed the behavior of unix:tmpdir to be equivalent to
unix:dir, which cases dbus-daemon to generate path based sockets,
instead of the previous abstract sockets. [1]
In this change we force dbus-daemon to generate an abstract socket by
specifying the abstract socket address in the command.
[1] https://gitlab.freedesktop.org/dbus/dbus/-/blob/dbus-1.14/NEWS#L64
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
For example winbindd when configured on a samba system using
sssd can trigger
apparmor="DENIED" operation="file_mmap" profile="/usr/sbin/winbindd" name="/usr/lib64/krb5/plugins/authdata /sssd_pac_plugin.so" pid=2798 comm="winbindd" requested_mask="m" denied_mask="m" fsuid=52311 ouid=0
Signed-off-by: Noel Power <noel.power@suse.com>
# profiles/apparmor.d/samba*: allow access to pid files directly in /run/
On Arch Linux, `samba-dcerpcd.pid` is in `/run/`, not `/run/samba/`.
apparmor="DENIED" operation="mknod" profile="samba-dcerpcd" name="/run/samba-dcerpcd.pid" pid=80920 comm="samba-dcerpcd" requested_mask="c" denied_mask="c" fsuid=0 ouid=0
The same is true for `nmbd.pid`, `smbd.pid` and probably others too.
# samba-dcerpcd requires access to `/var/cache/samba/names.tdb`.
audit: type=1400 audit(1676835286.187:62): apparmor="DENIED" operation="open" profile="samba-dcerpcd" name="/var/cache/samba/names.tdb" pid=6948 comm="samba-dcerpcd" requested_mask="wrc" denied_mask="wrc" fsuid=0 ouid=0
See also https://bbs.archlinux.org/viewtopic.php?id=281411
Since `usr.sbin.winbindd` already has a rule for it, and `usr.sbin.nmbd`
has similar ones, simply add `/var/cache/samba/*.tdb rwk` to
`abstractions/samba`.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/987
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: Christian Boltz <apparmor@cboltz.de>
On Arch Linux, `samba-dcerpcd.pid` is in `/run/`, not `/run/samba/`.
apparmor="DENIED" operation="mknod" profile="samba-dcerpcd" name="/run/samba-dcerpcd.pid" pid=80920 comm="samba-dcerpcd" requested_mask="c" denied_mask="c" fsuid=0 ouid=0
The same is true for `nmbd.pid`, `smbd.pid` and probably others too.
samba-dcerpcd requires access to `/var/cache/samba/names.tdb`.
audit: type=1400 audit(1676835286.187:62): apparmor="DENIED" operation="open" profile="samba-dcerpcd" name="/var/cache/samba/names.tdb" pid=6948 comm="samba-dcerpcd" requested_mask="wrc" denied_mask="wrc" fsuid=0 ouid=0
See also https://bbs.archlinux.org/viewtopic.php?id=281411
Since `usr.sbin.winbindd` already has a rule for it, and `usr.sbin.nmbd`
has similar ones, simply add `/var/cache/samba/*.tdb rwk` to
`abstractions/samba`.
This MR continues #280 work by changing string formatting in Python tests. `str.format()` is now used in places where bracket escapes are not necessary. In places where escapes would be necessary, I've ensured that format arguments are tuple-guarded.
I also fixed some potential future bugs that I noticed in the process:
- mutable default arguments that were luckily not being mutated
- a tuple missing a comma that conveniently functioned properly because `iter('_')` and `iter(('_',))` are effectively the same
Additionally, I fixed one current bug in the process:
- `dict.keys()` no longer returns a list in Python 3, so you can no longer call `.sort()` on its return value
I figured that the bug fixes are small enough that they don't deserve separate MRs, but if you disagree then I will happily split this up.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/985
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: Christian Boltz <apparmor@cboltz.de>
... to just the basename and profile name.
This also means to make the firefox and firefox.sh profiles named profiles.
Note: in the `firefox.sh` profile, the local include was added just today, therefore I think changing it (instead of adding) should be fine.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/975
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
contributed by Werner Fink via
https://bugzilla.opensuse.org/show_bug.cgi?id=1065388 comment 25
Note that - compared to the file in bugzilla - I removed the `rix` rules
for /usr/bin/groff and /usr/bin/nroff so that people can choose to ix,
Px or Cx groff/nroff as they wish, and then include the abstraction
inside the target profile to allow executing all the helpers.
I also added `include if exists <abstractions/groff.d>`
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/973
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
This MR addresses step 1 of 6 in #280, i.e. merging Launchpad translations into `master`. Tests are currently failing in this branch due to newly-introduced hotkey conflicts. I therefore prefixed this MR's title with "Draft: " to prevent premature merging. How would you like these hotkey conflicts resolved?
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/966
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
contributed by Werner Fink via
https://bugzilla.opensuse.org/show_bug.cgi?id=1065388 comment 25
Note that - compared to the file in bugzilla - I removed the `rix` rules
for /usr/bin/groff and /usr/bin/nroff so that people can choose to ix,
Px or Cx groff/nroff as they wish, and then include the abstraction
inside the target profile to allow executing all the helpers.
I also added `include if exists <abstractions/groff.d>`
Resolves#292.
This fix is the same as !830 but for Brave.
Opening links in Brave now works as intended.
Note that now a separate denial is caused, related to WidevineCDM, is produced:
```
[ERROR:content_main_runner_impl.cc(415)] Unable to load CDM /home/username/.config/BraveSoftware/Brave-Browser/WidevineCdm/4.10.2557.0/_platform_specific/linux_x64/libwidevinecdm.so (error: /home/username/.config/BraveSoftware/Brave-Browser/WidevineCdm/4.10.2557.0/_platform_specific/linux_x64/libwidevinecdm.so: failed to map segment from shared object)
```
In the syslog:
```
audit: type=1400 audit(1671108748.090:117): apparmor="DENIED" operation="file_mmap" profile="/usr/bin/evince//sanitized_helper" name="/home/username/.config/BraveSoftware/Brave-Browser/WidevineCdm/4.10.2557.0/_platform_specific/linux_x64/libwidevinecdm.so" pid=65765 comm="brave" requested_mask="m" denied_mask="m" fsuid=1000 ouid=100
```
I'm not sure if granting permission(s) for this is desirable. In either case, the potential relevant changes are out of the scope of this MR.
If I disable WidevineCDM in Brave, I get the following denial on cap sys_admin:
```
audit: type=1400 audit(1671112807.666:174): apparmor="DENIED" operation="capable" profile="/usr/bin/evince//sanitized_helper" pid=112098 comm="brave" capability=21 capname="sys_admin"
```
which is fine, as mentioned by @jjohansen [here](https://gitlab.com/apparmor/apparmor/-/merge_requests/830#note_831915024).
Closes#292
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/957
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
- ssl_certs: /{etc,usr/share}/pki/trust/ has more than the 'anchors' subdirectory
- crypoto: allow reading /etc/gcrypt/hwf.deny
I propose this patch for 3.0..master (2.13 doesn't have abstractions/crypto).
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/961
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
The key of SYSV message queues is an integer and the kernel uses an
integer to store the key. In order to improve performance when
travelling the DFA in the kernel, we should use an integer instead of
the string.
This [patch](5501f45f40) contains a rough implementation of what that would look like on the kernel side
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/968
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
The key of SYSV message queues is an integer and the kernel uses an
integer to store the key. In order to improve performance when
travelling the DFA in the kernel, we should use an integer instead of
the string.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
The mqueue tests were using the previous format which was specific for
capabilities. The qual= prefix should be used instead.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
dbus-broker requires some modification of the test suite. In summary:
* refactor to support starting and stopping both dbus and dbus-broker.
* Make it so we can run the tests on each, where appropriate
* skip unrequested reply and eavesdrop tests for dbus broker because they are not supported.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/965
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
DBus Broker was enabled for the dbus_message and dbus_service
regression tests.
The dbus_eavesdropping test does not run with dbus-broker because
eavesdropping was deprecated in favor or monitoring, so new tests for
the "BecomeMonitor" method need to be added.
The dbus_unrequested_reply test is also not supported by dbus-broker,
therefore the tests are skipped.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
The test "eavesdrop (confined w/o dbus perms)" was failing for the
wrong reason. While it should fail because it is missing dbus rules, it
was actually failing because it didn't have the required unix rule.
The error message was:
"FAIL: Failed to open connection to "session" message bus: Failed to open socket: Permission denied"
Corresponding audit log:
[28306.743863] audit: type=1400 audit(1671048091.505:297): apparmor="DENIED" operation="create" class="net" profile="/home/georgia/apparmor/tests/regression/apparmor/dbus_eavesdrop" pid=6787 comm="dbus_eavesdrop" family="unix" sock_type="stream" protocol=0 requested_mask="create" denied_mask="create" addr=none
After the change, the error message is:
FAIL: Failed to open connection to "session" message bus: An AppArmor policy prevents this sender from sending this message to this recipient; type="method_call", sender="(null)" (inactive) interface="org.freedesktop.DBus" member="Hello" error name="(unset)" requested_reply="0" destination="org.freedesktop.DBus" (bus)
Corresponding audit log:
[28444.248268] audit: type=1107 audit(1671048229.009:300): pid=6826 uid=0 auid=1000 ses=5 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="session" path="/org/freedesktop/DBus" interface="org.freedesktop.DBus" member="Hello" mask="send" name="org.freedesktop.DBus" pid=6854 label="/home/georgia/apparmor/tests/regression/apparmor/dbus_eavesdrop" peer_label="unconfined" exe="/usr/bin/dbus-daemon" sauid=0 hostname=? addr=? terminal=?'
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
The profile generated by dbus did not include this rule
which caused the following DENIED audit logs:
[26937.013475] audit: type=1400 audit(1671046721.776:246): apparmor="DENIED" operation="getattr" class="file" profile="/home/georgia/apparmor/tests/regression/apparmor/dbus_message" name="/tmp/sdtest.5720-14413-VQMPsH/output.dbus_message" pid=5866 comm="dbus_message" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
As reported in issue #295, the json output from aa-status would be invalid if
there were profiles defined for processes that were unconfined. Fix this by
ensuring the json for the processes array is closed properly.
Signed-off-by: Alex Murray <alex.murray@canonical.com>
Commit 8cf3534a5 ("tests regression: fix failure on older versions of
Make") from https://gitlab.com/apparmor/apparmor/-/merge_requests/639
was incorrectly applied, including the `+` prefixes from the proposed
patch. This causes the sysctl syscall() checks to not correctly be
applied and results in a mismatch of expectations in the
syscall_sysctl.sh test script, causing it and the testsuite to fail.
Thus, remove the bogon `+` characters from the Makefile, to make
USE_SYSCTL be set correctly.
Fixes: 8cf3534a5 ("tests regression: fix failure on older versions of Make")
Signed-off-by: Steve Beattie <steve.beattie@canonical.com>
getopt returns an int, not a char.
Error caused by this issue could only be observed on non-x86 systems.
Closes LP#2000359
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
If the "operation" field is not present, we get the following error:
AttributeError: 'NoneType' object has no attribute 'startswith'
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
States are not guaranteed to have transitions, but when inserting
a state into the chfa table there is an unconditional dereference
to the states first transition.
This will result in a bad reference and could result in an OOB
flag being set on the state when it shouldn't be.
Fixes: 16b67ddbd ("add ability to use out of band transitions"
Closes: https://gitlab.com/apparmor/apparmor/-/issues/290
Reported-by: Nobel Barakat <nobelbarakat@google.com>
Reported-by: Oleksandr Tymoshenko <ovt@google.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
This reverts commit 1aa474b25c.
This is a debug patch that unconditionally sets a profile debug flag
if mqueue rules are present. It should not be present in merged
code, and instead the user should set a debug flag on the profile if
that is desired.
This was merged with the patch to expedite the MR with the understanding
that this patch would be reverted.
Signed-off-by: John Johansen <john.johansen@canonical.com>
This MR expands the user namespace regression tests to use unshare and setns.
Note that setns associates itself to an existing user namespace, so it is not creating it.
This is relevant because the mediation only happens on the namespace creation for now.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/952
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
On Debian Sid, NVIDIA driver spams log with:
```
type=AVC msg=audit(1669542108.552:11855): apparmor="DENIED"
operation="open" profile="qtox" name="/proc/21222/comm" pid=21222
comm="qtox" requested_mask="r" denied_mask="r" fsuid=1000
ouid=1000FSUID="vincas" OUID="vincas"
```
```
type=AVC msg=audit(1669541506.703:11329): apparmor="DENIED"
operation="open" profile="skypeforlinux" name="/proc/19851/comm"
pid=19851 comm="skypeforlinux" requested_mask="r" denied_mask="r"
fsuid=1000 ouid=1000FSUID="vincas" OUID="vincas"
```
Read is initiated within libnvidia-glcore.so:
```
Thread 1 "qtox" hit Catchpoint 1 (call to syscall openat), 0x00007fb797b16ed0 in __libc_open64 (file=file@entry=0x7fb742adbb50 "/proc/self/comm", oflag=0) at ../sysdeps/unix/sysv/linux/open64.c:41
41 in ../sysdeps/unix/sysv/linux/open64.c
$27 = 0x7fb742adbb50 "/proc/self/comm"
0 0x00007fb797b16ed0 in __libc_open64 (file=file@entry=0x7fb742adbb50 "/proc/self/comm", oflag=0) at ../sysdeps/unix/sysv/linux/open64.c:41
1 0x00007fb797aa0862 in __GI__IO_file_open (fp=fp@entry=0x55795176e600, filename=filename@entry=0x7fb742adbb50 "/proc/self/comm", posix_mode=<optimized out>, prot=prot@entry=438, read_write=8, is32not64=<optimized out>) at ./libio/fileops.c:188
2 0x00007fb797aa0a1b in _IO_new_file_fopen (fp=fp@entry=0x55795176e600, filename=filename@entry=0x7fb742adbb50 "/proc/self/comm", mode=<optimized out>, mode@entry=0x7fb7428effe2 "r", is32not64=is32not64@entry=1) at ./libio/fileops.c:280
3 0x00007fb797a950f9 in __fopen_internal (filename=0x7fb742adbb50 "/proc/self/comm", mode=0x7fb7428effe2 "r", is32=1) at ./libio/iofopen.c:75
4 0x00007fb7423d791f in ?? () from /lib/x86_64-linux-gnu/libnvidia-glcore.so.470.141.03
5 0x00007fb7423d4515 in ?? () from /lib/x86_64-linux-gnu/libnvidia-glcore.so.470.141.03
6 0x00007fb7423d0226 in ?? () from /lib/x86_64-linux-gnu/libnvidia-glcore.so.470.141.03
7 0x00007fb7423e1961 in ?? () from /lib/x86_64-linux-gnu/libnvidia-glcore.so.470.141.03
8 0x00007fb74824bc79 in ?? () from /lib/x86_64-linux-gnu/libGLX_nvidia.so.0
9 0x00007fb7482b1c56 in ?? () from /lib/x86_64-linux-gnu/libGLX_nvidia.so.0
10 0x000000000000001d in ?? ()
11 0x00005579518975f0 in ?? ()
12 0x0000000000000001 in ?? ()
13 0x00007fb74824b1eb in ?? () from /lib/x86_64-linux-gnu/libGLX_nvidia.so.0
14 0x00005579518975f0 in ?? ()
15 0x00007fb79b2dda79 in call_init (env=0x7ffd92d7aac8, argv=0x7ffd92d7aab8, argc=-1831363648, l=0x7fb748516f70) at ./elf/dl-init.c:56
16 call_init (l=0x7fb748516f70, argc=-1831363648, argv=0x7ffd92d7aab8, env=0x7ffd92d7aac8) at ./elf/dl-init.c:26
17 0x00007fb79b2ddba4 in _dl_init (main_map=0x5579518975f0, argc=1, argv=0x7ffd92d7aab8, env=0x7ffd92d7aac8) at ./elf/dl-init.c:117
18 0x00007fb797b6def4 in __GI__dl_catch_exception (exception=<optimized out>, operate=<optimized out>, args=<optimized out>) at ./elf/dl-error-skeleton.c:182
19 0x00007fb79b2e430e in dl_open_worker (a=a@entry=0x7ffd92d79f20) at ./elf/dl-open.c:808
20 0x00007fb797b6de9a in __GI__dl_catch_exception (exception=<optimized out>, operate=<optimized out>, args=<optimized out>) at ./elf/dl-error-skeleton.c:208
21 0x00007fb79b2e46a8 in _dl_open (file=0x557951888020 "libGLX_nvidia.so.0", mode=<optimized out>, caller_dlopen=0x7fb78d7d4d27, nsid=<optimized out>, argc=1, argv=0x7ffd92d7aab8, env=0x7ffd92d7aac8) at ./elf/dl-open.c:884
22 0x00007fb797aa42d8 in dlopen_doit (a=a@entry=0x7ffd92d7a190) at ./dlfcn/dlopen.c:56
23 0x00007fb797b6de9a in __GI__dl_catch_exception (exception=exception@entry=0x7ffd92d7a0f0, operate=<optimized out>, args=<optimized out>) at ./elf/dl-error-skeleton.c:208
24 0x00007fb797b6df4f in __GI__dl_catch_error (objname=0x7ffd92d7a148, errstring=0x7ffd92d7a150, mallocedp=0x7ffd92d7a147, operate=<optimized out>, args=<optimized out>) at ./elf/dl-error-skeleton.c:227
25 0x00007fb797aa3dc7 in _dlerror_run (operate=operate@entry=0x7fb797aa4280 <dlopen_doit>, args=args@entry=0x7ffd92d7a190) at ./dlfcn/dlerror.c:138
26 0x00007fb797aa4389 in dlopen_implementation (dl_caller=<optimized out>, mode=<optimized out>, file=<optimized out>) at ./dlfcn/dlopen.c:71
27 ___dlopen (file=<optimized out>, mode=<optimized out>) at ./dlfcn/dlopen.c:81
28 0x00007fb78d7d4d27 in ?? () from /lib/x86_64-linux-gnu/libGLX.so.0
29 0x00007fb78d7d6335 in ?? () from /lib/x86_64-linux-gnu/libGLX.so.0
30 0x00007fb78d7cf9f8 in glXChooseFBConfig () from /lib/x86_64-linux-gnu/libGLX.so.0
31 0x00007fb748646f6a in ?? () from /usr/lib/x86_64-linux-gnu/qt5/plugins/xcbglintegrations/libqxcb-glx-integration.so
32 0x00007fb748644450 in ?? () from /usr/lib/x86_64-linux-gnu/qt5/plugins/xcbglintegrations/libqxcb-glx-integration.so
33 0x00007fb7486421b7 in ?? () from /usr/lib/x86_64-linux-gnu/qt5/plugins/xcbglintegrations/libqxcb-glx-integration.so
34 0x00007fb79838262d in QOpenGLContext::create() () from /lib/x86_64-linux-gnu/libQt5Gui.so.5
35 0x00007fb74bb4303c in ?? () from /usr/lib/x86_64-linux-gnu/qt5/plugins/platformthemes/KDEPlasmaPlatformTheme.so
36 0x00007fb797eb7aaf in qt_call_pre_routines () at kernel/qcoreapplication.cpp:317
37 QCoreApplicationPrivate::init (this=<optimized out>) at kernel/qcoreapplication.cpp:849
38 0x00007fb7983379dc in QGuiApplicationPrivate::init() () from /lib/x86_64-linux-gnu/libQt5Gui.so.5
39 0x00007fb798b684c9 in QApplicationPrivate::init() () from /lib/x86_64-linux-gnu/libQt5Widgets.so.5
40 0x0000557950f1d597 in main ()
```
Add read rule to allow reading @{pid}/comm.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/954
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: Christian Boltz <apparmor@cboltz.de>
On Debian Sid, NVIDIA driver spams log with:
```
type=AVC msg=audit(1669542108.552:11855): apparmor="DENIED"
operation="open" profile="qtox" name="/proc/21222/comm" pid=21222
comm="qtox" requested_mask="r" denied_mask="r" fsuid=1000
ouid=1000FSUID="vincas" OUID="vincas"
```
```
type=AVC msg=audit(1669541506.703:11329): apparmor="DENIED"
operation="open" profile="skypeforlinux" name="/proc/19851/comm"
pid=19851 comm="skypeforlinux" requested_mask="r" denied_mask="r"
fsuid=1000 ouid=1000FSUID="vincas" OUID="vincas"
```
Read is initiated within libnvidia-glcore.so:
```
Thread 1 "qtox" hit Catchpoint 1 (call to syscall openat), 0x00007fb797b16ed0 in __libc_open64 (file=file@entry=0x7fb742adbb50 "/proc/self/comm", oflag=0) at ../sysdeps/unix/sysv/linux/open64.c:41
41 in ../sysdeps/unix/sysv/linux/open64.c
$27 = 0x7fb742adbb50 "/proc/self/comm"
0 0x00007fb797b16ed0 in __libc_open64 (file=file@entry=0x7fb742adbb50 "/proc/self/comm", oflag=0) at ../sysdeps/unix/sysv/linux/open64.c:41
1 0x00007fb797aa0862 in __GI__IO_file_open (fp=fp@entry=0x55795176e600, filename=filename@entry=0x7fb742adbb50 "/proc/self/comm", posix_mode=<optimized out>, prot=prot@entry=438, read_write=8, is32not64=<optimized out>) at ./libio/fileops.c:188
2 0x00007fb797aa0a1b in _IO_new_file_fopen (fp=fp@entry=0x55795176e600, filename=filename@entry=0x7fb742adbb50 "/proc/self/comm", mode=<optimized out>, mode@entry=0x7fb7428effe2 "r", is32not64=is32not64@entry=1) at ./libio/fileops.c:280
3 0x00007fb797a950f9 in __fopen_internal (filename=0x7fb742adbb50 "/proc/self/comm", mode=0x7fb7428effe2 "r", is32=1) at ./libio/iofopen.c:75
4 0x00007fb7423d791f in ?? () from /lib/x86_64-linux-gnu/libnvidia-glcore.so.470.141.03
5 0x00007fb7423d4515 in ?? () from /lib/x86_64-linux-gnu/libnvidia-glcore.so.470.141.03
6 0x00007fb7423d0226 in ?? () from /lib/x86_64-linux-gnu/libnvidia-glcore.so.470.141.03
7 0x00007fb7423e1961 in ?? () from /lib/x86_64-linux-gnu/libnvidia-glcore.so.470.141.03
8 0x00007fb74824bc79 in ?? () from /lib/x86_64-linux-gnu/libGLX_nvidia.so.0
9 0x00007fb7482b1c56 in ?? () from /lib/x86_64-linux-gnu/libGLX_nvidia.so.0
10 0x000000000000001d in ?? ()
11 0x00005579518975f0 in ?? ()
12 0x0000000000000001 in ?? ()
13 0x00007fb74824b1eb in ?? () from /lib/x86_64-linux-gnu/libGLX_nvidia.so.0
14 0x00005579518975f0 in ?? ()
15 0x00007fb79b2dda79 in call_init (env=0x7ffd92d7aac8, argv=0x7ffd92d7aab8, argc=-1831363648, l=0x7fb748516f70) at ./elf/dl-init.c:56
16 call_init (l=0x7fb748516f70, argc=-1831363648, argv=0x7ffd92d7aab8, env=0x7ffd92d7aac8) at ./elf/dl-init.c:26
17 0x00007fb79b2ddba4 in _dl_init (main_map=0x5579518975f0, argc=1, argv=0x7ffd92d7aab8, env=0x7ffd92d7aac8) at ./elf/dl-init.c:117
18 0x00007fb797b6def4 in __GI__dl_catch_exception (exception=<optimized out>, operate=<optimized out>, args=<optimized out>) at ./elf/dl-error-skeleton.c:182
19 0x00007fb79b2e430e in dl_open_worker (a=a@entry=0x7ffd92d79f20) at ./elf/dl-open.c:808
20 0x00007fb797b6de9a in __GI__dl_catch_exception (exception=<optimized out>, operate=<optimized out>, args=<optimized out>) at ./elf/dl-error-skeleton.c:208
21 0x00007fb79b2e46a8 in _dl_open (file=0x557951888020 "libGLX_nvidia.so.0", mode=<optimized out>, caller_dlopen=0x7fb78d7d4d27, nsid=<optimized out>, argc=1, argv=0x7ffd92d7aab8, env=0x7ffd92d7aac8) at ./elf/dl-open.c:884
22 0x00007fb797aa42d8 in dlopen_doit (a=a@entry=0x7ffd92d7a190) at ./dlfcn/dlopen.c:56
23 0x00007fb797b6de9a in __GI__dl_catch_exception (exception=exception@entry=0x7ffd92d7a0f0, operate=<optimized out>, args=<optimized out>) at ./elf/dl-error-skeleton.c:208
24 0x00007fb797b6df4f in __GI__dl_catch_error (objname=0x7ffd92d7a148, errstring=0x7ffd92d7a150, mallocedp=0x7ffd92d7a147, operate=<optimized out>, args=<optimized out>) at ./elf/dl-error-skeleton.c:227
25 0x00007fb797aa3dc7 in _dlerror_run (operate=operate@entry=0x7fb797aa4280 <dlopen_doit>, args=args@entry=0x7ffd92d7a190) at ./dlfcn/dlerror.c:138
26 0x00007fb797aa4389 in dlopen_implementation (dl_caller=<optimized out>, mode=<optimized out>, file=<optimized out>) at ./dlfcn/dlopen.c:71
27 ___dlopen (file=<optimized out>, mode=<optimized out>) at ./dlfcn/dlopen.c:81
28 0x00007fb78d7d4d27 in ?? () from /lib/x86_64-linux-gnu/libGLX.so.0
29 0x00007fb78d7d6335 in ?? () from /lib/x86_64-linux-gnu/libGLX.so.0
30 0x00007fb78d7cf9f8 in glXChooseFBConfig () from /lib/x86_64-linux-gnu/libGLX.so.0
31 0x00007fb748646f6a in ?? () from /usr/lib/x86_64-linux-gnu/qt5/plugins/xcbglintegrations/libqxcb-glx-integration.so
32 0x00007fb748644450 in ?? () from /usr/lib/x86_64-linux-gnu/qt5/plugins/xcbglintegrations/libqxcb-glx-integration.so
33 0x00007fb7486421b7 in ?? () from /usr/lib/x86_64-linux-gnu/qt5/plugins/xcbglintegrations/libqxcb-glx-integration.so
34 0x00007fb79838262d in QOpenGLContext::create() () from /lib/x86_64-linux-gnu/libQt5Gui.so.5
35 0x00007fb74bb4303c in ?? () from /usr/lib/x86_64-linux-gnu/qt5/plugins/platformthemes/KDEPlasmaPlatformTheme.so
36 0x00007fb797eb7aaf in qt_call_pre_routines () at kernel/qcoreapplication.cpp:317
37 QCoreApplicationPrivate::init (this=<optimized out>) at kernel/qcoreapplication.cpp:849
38 0x00007fb7983379dc in QGuiApplicationPrivate::init() () from /lib/x86_64-linux-gnu/libQt5Gui.so.5
39 0x00007fb798b684c9 in QApplicationPrivate::init() () from /lib/x86_64-linux-gnu/libQt5Widgets.so.5
40 0x0000557950f1d597 in main ()
```
Add read rule to allow reading @{pid}/comm.
The kernel will allow for a couple of debug flags on a profile that
can be used to trigger debug messages for only profiles/labels that
have the flag set. Add basic support for these to the parser.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Based on what was done in the parser, replicate the logic
so it can be used in the python tools.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Setns is used to associate to an existing user namespace, so the
kernel security hook for user namespace creation is not called.
The restriction for setns is that it should have the capability
sys_admin.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
This MR closes#286.
Strings with only invalid escape sequences were prefixed with an `r`. Strings containing both valid and invalid escape sequences were handled on a case-by-case basis, as simply changing to a raw string breaks valid escape sequences.
Closes#286
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/951
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: Christian Boltz <apparmor@cboltz.de>
This MR closes#276.
In b150c40ed1, I removed the big comment at the top of `BaseRule` stating what methods have to be implemented by subclasses. This was out-of-date, had redundant method descriptions, and was no longer necessary now that `BaseRule` has an `ABCMeta` metaclass and auto-enforces the implementation of abstract methods.
`rule._logprof_header_localvars()` implementations weren't consistent, so I took the opportunity to clean them up in db99138f56. Return types differed, the presence of empty `header` lists differed, how size-two collections were returned differed, etc.
Otherwise, this MR closely follows the discussion in #276.
Closes#276
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/950
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: Christian Boltz <apparmor@cboltz.de>
This closes#277 by introducing the following changes:
1. `BaseRule` was made a "proper" abstract base class in that it now enforces that subclasses implement all abstract methods.
2. As a consequence of this change, `BaseRule` can no longer be directly instantiated; tests were changed accordingly.
3. These test changes led to test failures, the reason being that many rule methods hardcoded class names, breaking inheritance. I made a commit to address this.
4. Once tests were passing, code coverage regressed due to the fact that there was now effectively-unreachable code in abstract instance methods. This code, which was only raising `NotImplementedError`s, was removed. I say "effectively-unreachable" here because it could be reached by calling `super()` via a subclass.
5. There are three "bonus" commits as well; one bug fix, one typo fix, and one cleanup.
Closes#277
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/930
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: Christian Boltz <apparmor@cboltz.de>
Glibc in 2.36 and later will [1] access sysfs at
/sys/devices/system/cpu/possible when usig sysconf
for _SC_NPROCESSORS_CONF.
That will make a lot of different code, for example
anything linked against libnuma, trigger this apparmor
denial.
apparmor="DENIED" operation="open" class="file" ...
name="/sys/devices/system/cpu/possible" ...
requested_mask="r" denied_mask="r" fsuid=0 ouid=0

This entry seems rather safe, and it follows others
that are already in place. Instead of fixing each
software individually this should go into the base
profile as well.
Initially reported via
https://bugs.launchpad.net/ubuntu/+source/apparmor/+bug/1989073
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/267
MR: none - ML
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
The 3.1 release bumped its library version, and for consistency
needs to be bumped here as well.
Signed-off-by: John Johansen <john.johansen@canonical.com>
This allows regression tests to generate profiles that use rule qualifiers,
such as allow, deny, and audit. Qualifiers can be specified for a rule by
prepending 'qual=', followed by a comma-separated list of rule qualifiers,
then a ':', then the rule itself.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/925
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
This allows regression tests to generate profiles that use rule qualifiers,
such as allow, deny, and audit. Qualifiers can be specified for a rule by
prepending 'qual=', followed by a comma-separated list of rule qualifiers,
then a ':', then the rule itself.
Signed-off-by: Jon Tourville <jon.tourville@canonical.com>
The test kernel_features only checked if the feature file exists, but
there are cases when we need to check if the feature is part of the
file's content. For example, we might want to check if a mode is present
in the feature "mask" file.
This is already supported by libapparmor's aa_features_supports.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Print out a summary of the tests that passed and failed at the end of the
regression tests. Merge the tests and alltests make targets since they
only differ in which tests are run.
Signed-off-by: Jon Tourville <jon.tourville@canonical.com>
This update to the regression test framework allows a test script to
execute a test binary as a different user by passing '-u <username>'
to the settest function.
Signed-off-by: Jon Tourville <jon.tourville@canonical.com>
When WSL automatically generates a resolv.conf for an instance, the /etc/resolv.conf file is a symlink to /mnt/wsl/resolv.conf. This patch adds an entry for this to the other policies to handle such management.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/935
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
audit.log lines on Arch have an additional FSUID="username" OUID="username",
separated from the previous part of the log line with 0x1d.
Extend the log parsing to accept 0x1d as whitespace, and to recognize
(and ignore) FSUID and OUID.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/271
In order to decrease the number of characters in the audit logs
from the kernel, we will drop the "_mask" from the fields
"requested_mask" and "denied_mask".
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
GUI applications such as KDE dragon player, qTox, LibreOffice tries to
access .config/kwinrc, .config/kdedefaults/kwinrc and
.config/kdedefaults/kdeglobals.
Update abstractions/kde to fix denials for applications running under
KDE.
This adds a single e2e test to check that raw_data of a loaded
policy matches the generated policy (cached).
Signed-off-by: Spyros Seimenis <spyros.seimenis@canonical.com>
A single '$()' results in variable expansion, which makes
"$(rpm --eval ..)" always an empty string.
Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com>
As discussed in !920, this MR renames BaseRule's `parse()` and `_parse()` methods to `create_instance()` and `_create_instance()`, respectively. It then removes the `selection_to_rule_obj` function from `apparmor.aa`, which is now an unnecessary alias for the renamed public method.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/923
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: Christian Boltz <apparmor@cboltz.de>
This MR addresses #269.
Notes:
- In all `is_equal_localvars()` Rule methods, `type(self)` is now used instead of the explicit class. This approach works better with inheritance, and was already used in `IncludeRule` for this reason.
- Remaining direct type comparisons were changed to use `is`/`is not` instead of `==`/`!=`.
- I fixed two typos in `alias.py`; the plural of alias is aliases, not aliass.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/920
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: Christian Boltz <apparmor@cboltz.de>
If audit.log contains entries for a profile that doesn't exist (for
example when working with a log file from another system), skip these
log entries instead of crashing.
Reproducer (crashes without this patch):
aa-logprof -f <(echo 'type=AVC msg=audit(1661739121.578:77893): apparmor="DENIED" operation="open" profile="no_such_profile" name="/run/" pid=33099 comm="no" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0')
I propose this patch for 3.1 and master. (3.0 and older are not affected and do not need this fix.)
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/919
Approved-by: Jon Tourville <jon.tourville@canonical.com>
Merged-by: Christian Boltz <apparmor@cboltz.de>
If audit.log contains entries for a profile that doesn't exist (for
example when working with a log file from another system), skip these
log entries instead of crashing.
Reproducer (crashes without this patch):
aa-logprof -f <(echo 'type=AVC msg=audit(1661739121.578:77893): apparmor="DENIED" operation="open" profile="no_such_profile" name="/run/" pid=33099 comm="no" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0')
As discussed in #241 and !906, there are some overly broad `except` statements that should be fixed. This MR does so. Some notes:
- `profile_dir` in `aa.py` may be `None`, hence the `TypeError` catches. The other globals are not caught in the code, however. E.g. there are possibilities of TypeErrors due to `extra_profile_dir` being `None`.
- I added a TODO in `common.py` that I'd like some eyes on. I do not think that `os.path.normpath` can raise an exception (the [Python docs](https://docs.python.org/3/library/os.path.html?#os.path.normpath) don't mention exceptions, and none are raised in the [CPython source code](https://github.com/python/cpython/blob/main/Lib/posixpath.py#L345)). [After discussing this in the MR, the `os.path.normpath` check was removed.]
- The `except Exception: raise` occurrences throughout `test-aa-easyprof.py` do nothing, so I removed them.
- In `valgrind_simple.py`, I fixed a possible `NameError` in the `finally` clause.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/912
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: Christian Boltz <apparmor@cboltz.de>
The upstream php-fpm.conf file carries the following pid file example
path:
[global]
; Pid file
; Note: the default prefix is @EXPANDED_LOCALSTATEDIR@
; Default Value: none
;pid = run/php-fpm.pid
Add this path to profiles/apparmor.d/php-fpm, alongside the current
nested "@{run}/php{,-fpm}/php*-fpm.pid" wildcard.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/267
Suggested-by: Ali Abdallah <ali.abdallah@suse.com>
Signed-off-by: David Disseldorp <ddiss@suse.de>
In commit 7c7224004 ("Prepare for AppArmor 3.1 release"), as preperation
for the AppArmor 3.1.0 release, the SO versioning information was
adjusted, using a more significant bump to give prior AppArmor releases
room to address bugs in libapparmor without ending up with conflicting
SO versions. Unfortunately, that process was untested and because
AA_LIB_AGE was not incremented by the same amount as AA_LIB_CURRENT,
this resulted in an accidental major SO versions bump with the library
SO version being:
libapparmor.so.4.9.0
This commit increments AA_LIB_AGE by the same amount, resulting in a
library versioned as:
libapparmor.so.1.12.0
and adds a note to mention that AA_LIB_AGE needs to be incremented
in the same way as AA_LIB_CURRENT. This fix is intended to address
this for the 3.1 branch; I'd like to find a better approach for
the development branch that can be used in future AppArmor primary
releases.
In general, thanks to symbol versioning (see
`libraries/libapparmor/src/libapparmor.map`) we should not need to
ever bump the SO version except in an extreme case.
Fixes: 7c7224004 ("Prepare for AppArmor 3.1 release")
Signed-off-by: Steve Beattie <steve.beattie@canonical.com>
Bug: https://gitlab.com/apparmor/apparmor/-/issues/266
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/913
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Merged-by: Georgia Garcia <georgia.garcia@canonical.com>
(cherry picked from commit 075c69a4eb)
f9dbaa38 [3.1] libapparmor: fix mistaken SO version bump
by adding a warning flag that is disabled by default. This will enable
devs to find when and where #include is in use by adding the compile
flag
--warn=pound-include
and can even abort policy compiles by using
--warn=pound-include --Werror=pound-include
The resulting messages look like
Warning from /etc/apparmor.d/usr.sbin.cupsd (/etc/apparmor.d/usr.sbin.cupsd line 5): deprecated use of '#include'
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Time-out
This change tries to give us some room to deal with versioning issues
like we had in
145136f6 Fix 2.13 libapparmor so version
which revered the library version bump in
5c47e448 libapparmor: Bump revision in preparation for release.
which was done because of the symbol added by
351014c3 libapparmor: add _aa_asprintf to private symbols
unfortunately this collided with the 3.0 library symbol versioning
which had a different set of symbols with the same version numbering.
Leaving us no way to increase the version number to when fixing an
exported symbol version in a released library.
Ideally this would have been fixed with library version synchs but
in this case that option wasn't open as we were dealing with two
released versions of the library.
Bumping the current version by 5 on the larger releases gives us room
to deal with these kind of bugs in the future.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Time-out
Note: This was reported for /usr/libexec/libvirt_leaseshelper, but since
this is probably unrelated to the path or a path change, this commit
also adds r permissions for the previous path.
Fixes: https://bugzilla.opensuse.org/show_bug.cgi?id=1202161
I propose this patch for 3.0 and master (optionally also for 2.12 and 2.13 - please tell me if you want that after reviewing the patch, or just merge ;-)
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/905
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Note: This was reported for /usr/libexec/libvirt_leaseshelper, but since
this is probably unrelated to the path or a path change, this commit
also adds r permissions for the previous path.
Fixes: https://bugzilla.opensuse.org/show_bug.cgi?id=1202161
profiles/Makefile:
Set PYTHON_DIST_BUILD_PATH using
libraries/libapparmor/swig/python/test/buildpath.py as it solves the
problem of setting the build directory generically.
libraries/libapparmor/swig/python/test/buildpath.py:
The changes introduced in
cc7f549665
targetted a wrong setuptools version (61.2).
The change in build directory naming has been introduced with 62.1
(1c23f5e1e4).
I've seen this test fail because "apparmor_parser -N" returned the expected
lines, but in a different order than what's expected (dirtest.out).
To fix this, sort both the expected and actual output.
This MR closes#239. In the temporary file commit, `tempfile.NamedTemporaryFile` is preferred over `tempfile.mkstemp` because it allows for simpler use of context managers and lets you choose what mode to open the file in. Also in this commit, note that in `aa.py` and `easyprof.py` destination files are now written directly, instead of writing to temp files and then renaming them.
Closes#239
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/898
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: Christian Boltz <apparmor@cboltz.de>
Per the discussion in #243, this MR removes Python 2 compatibility. Namely, this merge request:
- removes code behind `sys` and `platform` interpreter version checks
- removes `unicode` vs. `str` handling
- removes unnecessary `__future__` imports
- removes unnecessary `object` inheritance
- removes unnecessary `super()` arguments
- uncomments commented-out code with "uncomment when python3 only" notes or some variant of that message
Regarding the `unicode` vs. `str` handling, it's arguably more Pythonic to check `isinstance(x, str)` as opposed to `type(x) is str`, but I didn't want to alter code behavior.
A change needs to be made to the `INCOMPLETE_COVERAGE` setting in `utils/test/Makefile` to get the pipeline to pass. I didn't get anywhere tweaking the setting myself, so someone else with more AppArmor experience will have to make that change.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/894
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: Christian Boltz <apparmor@cboltz.de>
This is a follow-up on !812, which added a call to systemd-detect-virt.
Everywhere else we don't assume that program is present,
and first check if it's there before we run it.
Let's do the same here.
Tuples [are quite a bit faster than lists](https://stackoverflow.com/a/22140115). If you don't need mutability, a tuple is almost always the better collection to choose. This merge request changes lists to tuples where appropriate, and speeds up some list creations by changing `list()` calls into `[]` literals. It also changes a few function calls to use tuple unpacking, i.e. `func(*tup)`, as opposed to `func(tup[0], tup[1], ...)`. This yields yet another performance improvement, as well as a readability improvement.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/889
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: Christian Boltz <apparmor@cboltz.de>
The inetutils syslogd implementation integrates the kmsg support in the
main server, it has support for syslog.d configuration fragment files.
and it uses a slightly different pid filename.
Signed-off-by: Guillem Jover <guillem@hadrons.org>
Abstractions should not generally include deny rules as this can unduly
constrain profiles which include them due to the precedent matching rules
between deny vs allow rules. Also as per the comment, this is not required
for exo-open to work, so simply omit it from the abstraction for
now. Finally, in Ubuntu, the evince profile includes the exo-open
abstraction and this deny rule causes evince to fail to initialise
correctly as it then assumes it cannot use gvfs.
Signed-off-by: Alex Murray <alex.murray@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/884
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Abstractions should not generally include deny rules as this can unduly
constrain profiles which include them due to the precedent matching rules
between deny vs allow rules. Also as per the comment, this is not required
for exo-open to work, so simply omit it from the abstraction for
now. Finally, in Ubuntu, the evince profile includes the exo-open
abstraction and this deny rule causes evince to fail to initialise
correctly as it then assumes it cannot use gvfs.
Signed-off-by: Alex Murray <alex.murray@canonical.com>
The inverse character set lists the characters it doesn't match. If
the inverse character set contains an oob then that is NOT considered
a match. So length should be one.
However because of oobs are handle not containing an oob doesn't mean
there is a match either. Currently the only way to match an oob is
via a positive express (no inverse matches are possible).
Signed-off-by: John Johansen <john.johansen@canonical.com>
I noticed that some apps return the following errors when launched:
```
kernel: audit: type=1400 audit(1651244478.255:5501): apparmor="DENIED" operation="open" profile="some_app" name="/sys/devices/pci0000:00/0000:00:02.0/revision" pid=1877976 comm="some_app" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
kernel: audit: type=1400 audit(1651244478.255:5502): apparmor="DENIED" operation="open" profile="some_app" name="/sys/devices/pci0000:00/0000:00:02.0/config" pid=1877976 comm="some_app" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
```
Blocking the files results in the following errors when the app is executed in a terminal:
```
MESA: error: Failed to query drm device.
libGL error: failed to create dri screen
libGL error: failed to load driver: crocus
MESA: error: Failed to query drm device.
libGL error: failed to create dri screen
libGL error: failed to load driver: crocus
```
Since they have something to do with MESA, I think the mesa abstraction should
be updated to fix the issue.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/879
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Without the change apparmor build fails on this week's gcc-13 snapshot as:
capability.h:66:6: error: variable or field '__debug_capabilities' declared void
66 | void __debug_capabilities(uint64_t capset, const char *name);
| ^~~~~~~~~~~~~~~~~~~~
capability.h:66:27: error: 'uint64_t' was not declared in this scope
66 | void __debug_capabilities(uint64_t capset, const char *name);
| ^~~~~~~~
capability.h:23:1: note: 'uint64_t' is defined in header '<cstdint>'; did you forget to '#include <cstdint>'?
22 | #include <linux/capability.h>
+++ |+#include <cstdint>
23 |
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/882
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Without the change apparmor build fails on this week's gcc-13 snapshot as:
capability.h:66:6: error: variable or field '__debug_capabilities' declared void
66 | void __debug_capabilities(uint64_t capset, const char *name);
| ^~~~~~~~~~~~~~~~~~~~
capability.h:66:27: error: 'uint64_t' was not declared in this scope
66 | void __debug_capabilities(uint64_t capset, const char *name);
| ^~~~~~~~
capability.h:23:1: note: 'uint64_t' is defined in header '<cstdint>'; did you forget to '#include <cstdint>'?
22 | #include <linux/capability.h>
+++ |+#include <cstdint>
23 |
aarch64 needs some additional rules on tumbleweed to handle for
example
apparmor="DENIED" operation="file_mmap" profile="samba-dcerpcd" name="/usr/lib64/samba/samba-dcerpcd" pid=897 comm="samba-dcerpcd" requested_mask="m" denied_mask="
The other new rpcd_* services exhibit similar errors
Fixes: https://bugzilla.opensuse.org/show_bug.cgi?id=1198309
Signed-off-by: Noel Power <noel.power@suse.com>
I noticed that some apps return the following errors when launched:
kernel: audit: type=1400 audit(1651244478.255:5501): apparmor="DENIED" operation="open" profile="some_app" name="/sys/devices/pci0000:00/0000:00:02.0/revision" pid=1877976 comm="some_app" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
kernel: audit: type=1400 audit(1651244478.255:5502): apparmor="DENIED" operation="open" profile="some_app" name="/sys/devices/pci0000:00/0000:00:02.0/config" pid=1877976 comm="some_app" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
Blocking the files results in the following errors when the app is executed in a terminal:
MESA: error: Failed to query drm device.
libGL error: failed to create dri screen
libGL error: failed to load driver: crocus
MESA: error: Failed to query drm device.
libGL error: failed to create dri screen
libGL error: failed to load driver: crocus
Since they have something to do with MESA, I think the mesa abstraction should
be updated to fix the issue.
The snap_browsers abstraction requires more permissions
due to updates on snaps.
Some of the permissions are not required in older versions of
Ubuntu that use 2.12 and 2.13, but are introduced for unification
and ease of maintenance purposes. These include:
```
all dbus permissions,
@{PROC}/sys/kernel/random/uuid r,
owner @{PROC}/@{pid}/cgroup r,
/var/lib/snapd/sequence/{chromium,firefox,opera}.json r,
```
I also propose a cherry-pick of this commit to 2.12, 2.13 and 3.0
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/877
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
The snap_browsers abstraction requires more permissions
due to updates on snaps.
Some of the permissions are not required in older versions of
Ubuntu that use 2.12 and 2.13, but are introduced for unification
and ease of maintenance purposes. These include:
all dbus permissions,
@{PROC}/sys/kernel/random/uuid r,
owner @{PROC}/@{pid}/cgroup r,
/var/lib/snapd/sequence/{chromium,firefox,opera}.json r,
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
samba-4.16 has a completely new dcerpc subsystem, services that
used to be built into the smbd daemon itself (and deployed in forked
instances) are now hosted in standalone binaries. The following new
binaries now need new profiles
rpcd_classic
rpcd_epmapper
rpcd_fsrvp
rpcd_lsad
rpcd_mdssvc
rpcd_rpcecho
rpcd_spoolss
rpcd_winreg
samba-dcerpcd
Additionally smbd & winbindd need new entries because the exec
samba-dcerpcd
Signed-off-by: Noel Power <noel.power@suse.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/871
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: Christian Boltz <apparmor@cboltz.de>
samba-4.16 has a completely new dcerpc subsystem, services that
used to be built into the smbd daemon itself (and deployed in forked
instances) are now hosted in standalone binaries. The following new
binaries now need new profiles
rpcd_classic
rpcd_epmapper
rpcd_fsrvp
rpcd_lsad
rpcd_mdssvc
rpcd_rpcecho
rpcd_spoolss
rpcd_winreg
samba-dcerpcd
Mostly these are captured in a single common profile 'samba-rpcd'
Additionally smbd & winbindd need new entries because they exec
samba-dcerpcd
Fixes: https://bugzilla.opensuse.org/show_bug.cgi?id=1198309
Signed-off-by: Noel Power <noel.power@suse.com>
This function is based on reload_profile() in tools.py, but also
replaces most of reload_base() in aa.py.
For bonus points, we get rid of shell=True when calling apparmor_parser.
Note: This slightly changes the behaviour of aa-logprof and aa-genprof -
if the parser errors out ($? > 0), the output no longer gets hidden.
However, this will not raise an exception, and aa-logprof and aa-genprof
won't abort on parser errors.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/855
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
systemd will attempt to force socket buffer size using setsockopt
and param SO_SNDBUFFORCE (which require net_admin cap) if it's previous
attempt to set size was clipped by kernel limit.
- Silence 'type=AVC msg=audit(1648725005.727:201): apparmor="DENIED" operation="capable" profile="smbd" pid=3054 comm="smbd" capability=12 capname="net_admin"'
type entries.
Signed-off-by: Noel Power <noel.power@suse.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/867
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
... if a test is expected to fail, but succeeds.
Also fix the copyright year - the test was created in 2022, not in 2013.
This fixes my comments on
bd78b6b292
systemd will attempt to force socket buffer size using setsockopt
and param SO_SNDBUFFORCE (which require net_admin cap) if it's previous
attempt to set size was clipped by kernel limit.
- Silence 'type=AVC msg=audit(1648725005.727:201): apparmor="DENIED" operation="capable" profile="smbd" pid=3054 comm="smbd" capability=12 capname="net_admin"'
type entries.
Signed-off-by: Noel Power <noel.power@suse.com>
similar to commit 2f9d172c64
we discovered that there was a service outage
when dovecot tried to send a usr1 signal
type=AVC msg=audit(1648024138.249:184964): apparmor="DENIED" operation="signal" profile="dovecot" pid=1690 comm="dovecot" requested_mask="send" denied_mask="send" signal=usr1 peer="dovecot-imap-login"
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/865
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: Christian Boltz <apparmor@cboltz.de>
- add pki/blacklist and pki/blocklist
- add /usr/share/pki/ in adddition to /etc/pki/
pki/blocklist was suggested by @darix, the other changes are things I noticed while adding it.
I propose this patch for 3.0 and master. (`abstractions/ssl_certs` on 2.x branches is quite different and needs a manual backport (or more cherry-picks) if you want to backport this MR.)
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/864
Approved-by: Jon Tourville <jon.tourville@canonical.com>
Merged-by: Christian Boltz <apparmor@cboltz.de>
similar to commit 2f9d172c64
we discovered that there was a service outage
when dovecot tried to send a usr1 signal
type=AVC msg=audit(1648024138.249:184964): apparmor="DENIED" operation="signal" profile="dovecot" pid=1690 comm="dovecot" requested_mask="send" denied_mask="send" signal=usr1 peer="dovecot-imap-login"
- add pki/blacklist and pki/blocklist
- add /usr/share/pki/ in adddition to /etc/pki/
pki/blocklist was suggested by @darix, the other changes are things I noticed while adding it.
libapparmor: fix handling of failed symlink traversal, fixed a couple
of directory walk issues that could cause failures. The test included
in this commit was supposed to be included in the previous commit,
but was accidentally dropped. Even worse the make file changes did
make it causing the previous commit to break the CI.
Fixes: MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/85
Signed-off-by: John Johansen <john.johansen@canonical.com>
Get rid of subprocess with shell=True
Simplify logmark used in syslog.
Instead of using `date | md5sum` and parsing the output to get the actual md5sum (without the stdin filename), use the current unixtime with a `logmark-` prefix.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/856
Acked-by: Seth Arnold <seth.arnold@gmail.com>
Merged-by: Christian Boltz <apparmor@cboltz.de>
Instead of using `date | md5sum` and parsing the output to get the
actual md5sum (without the stdin filename), use the current unixtime
with a `logmark-` prefix.
This function is based on reload_profile() in tools.py, but also
replaces most of reload_base() in aa.py.
For bonus points, we get rid of shell=True when calling apparmor_parser.
Note: This slightly changes the behaviour of aa-logprof and aa-genprof -
if the parser errors out ($? > 0), the output no longer gets hidden.
However, this will not raise an exception, and aa-logprof and aa-genprof
won't abort on parser errors.
Today, a normal user connected and did something (dunno what) that caused smbd to try to `/usr/share/samba/mdssvc/elasticsearch_mappings.json`:
Samba logs:
```
root@smb:~# journalctl -b0 -u smbd
-- Logs begin at Fri 2022-01-21 14:17:01 UTC, end at Thu 2022-02-17 23:56:02 UTC. --
Feb 17 14:01:20 smb systemd[1]: Starting Samba SMB Daemon...
Feb 17 14:01:26 smb smbd[113]: [2022/02/17 14:01:26.904865, 0] ../../lib/util/become_daemon.c:135(daemon_ready)
Feb 17 14:01:26 smb systemd[1]: Started Samba SMB Daemon.
Feb 17 14:01:26 smb smbd[113]: daemon_ready: daemon 'smbd' finished starting up and ready to serve connections
Feb 17 21:05:35 smb smbd[3084]: pam_unix(samba:session): session opened for user jdoe by (uid=0)
Feb 17 21:05:37 smb smbd[3084]: [2022/02/17 21:05:37.735182, 0] ../../source3/rpc_server/mdssvc/mdssvc_es.c:92(mdssvc_es_init)
Feb 17 21:05:37 smb smbd[3084]: mdssvc_es_init: Opening mapping file [/usr/share/samba/mdssvc/elasticsearch_mappings.json] failed: unable to open /usr/share/samba/mdssvc/elasticsearch_mappings.json: Permission denied
Feb 17 21:05:37 smb smbd[3084]: [2022/02/17 21:05:37.735436, 0] ../../source3/rpc_server/mdssvc/mdssvc.c:1490(mdssvc_init)
Feb 17 21:05:37 smb smbd[3084]: mdssvc_init: backend init failed
Feb 17 21:05:37 smb smbd[3084]: [2022/02/17 21:05:37.735562, 0] ../../source3/rpc_server/mdssvc/srv_mdssvc_nt.c:152(_mdssvc_open)
Feb 17 21:05:37 smb smbd[3084]: _mdssvc_open: Couldn't create policy handle for partage
Feb 17 23:56:02 smb smbd[3084]: pam_unix(samba:session): session closed for user jdoe
```
Since the 'smb' machine is a container, the Apparmor denial ended up in the host's log:
```
$ journalctl -o cat --grep samba -k --since today | cat
audit: type=1400 audit(1645131937.730:98): apparmor="DENIED" operation="open" namespace="root//lxd-smb_<var-snap-lxd-common-lxd>" profile="smbd" name="/usr/share/samba/mdssvc/elasticsearch_mappings.json" pid=35359 comm="smbd" requested_mask="r" denied_mask="r" fsuid=166549 ouid=165536
```
It is the first time it occurs in years of use but it seems legitimate as:
1) this file is installed by the package
2) `git grep -F elasticsearch_mappings` in Debian samba's source shows many hits:
```
$ git grep -F elasticsearch_mappings
debian/samba.install:usr/share/samba/mdssvc/elasticsearch_mappings.json
docs-xml/manpages/mdsearch.1.xml: <filename>/usr/share/samba/mdssvc/elasticsearch_mappings.json</filename>
docs-xml/smbdotconf/misc/elasticsearchmappings.xml: <value type="default">&pathconfig.SAMBA_DATADIR;/elasticsearch_mappings.json</value>
docs/manpages/mdfind.1:/usr/share/samba/mdssvc/elasticsearch_mappings\&.json
docs/manpages/smb.conf.5:\fI\fIelasticsearch:mappings\fR\fR\fI = \fR\fI${prefix}/var/samba/elasticsearch_mappings\&.json\fR\fI \fR
selftest/selftest.pl: elasticsearch:mappings = $srcdir_abs/source3/rpc_server/mdssvc/elasticsearch_mappings.json
selftest/target/Samba3.pm: elasticsearch:mappings = $srcdir_abs/source3/rpc_server/mdssvc/elasticsearch_mappings.json
source3/rpc_server/mdssvc/es_parser_test.c: "%s/mdssvc/elasticsearch_mappings.json",
source3/rpc_server/mdssvc/mdssvc_es.c: "%s/mdssvc/elasticsearch_mappings.json",
source3/rpc_server/wscript_build: 'mdssvc/elasticsearch_mappings.json')
```
While only the `mdssvc` sub-dir could be authorized, the whole dir content seemed OK for read access anyway:
```
root@smb:~# ll /usr/share/samba/
total 53
drwxr-xr-x 5 root root 10 Feb 1 14:08 ./
drwxr-xr-x 67 root root 67 Jun 22 2021 ../
-rwxr-xr-x 1 root root 1163 Jan 31 13:11 addshare.py*
drwxr-xr-x 3 root root 4 Feb 1 14:08 admx/
drwxr-xr-x 2 root root 3 Feb 1 14:08 mdssvc/
-rwxr-xr-x 1 root root 2059 Jan 31 13:11 panic-action*
-rwxr-xr-x 1 root root 1333 Jan 31 13:11 setoption.py*
drwxr-xr-x 5 root root 57 Feb 1 14:08 setup/
-rw-r--r-- 1 root root 8942 Jan 31 13:11 smb.conf
-rwxr-xr-x 1 root root 2682 Jan 31 13:11 update-apparmor-samba-profile*
```
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/853
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
It appears secret detection is failing if the master branch in the tree a merge request is being made from is too (some unknown value) far behind the branch of the tree it is being merged into.
This is problematic as it is not started practice to refresh the upstream branches of forked trees, but to keep multiple remotes in a single local tree, branch from mainline master, work on the branch and push to the fork for the merge request. This will require contributors to refresh their forked trees in secret-detection fails. Which may be problematic for some contributors, but since we don't know how bad this is going to be, for now re-enable secret detection.
This reverts commit 8b4344c17b.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/854
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: John Johansen <john@jjmx.net>
As shellcheck taught me
today (https://github.com/koalaman/shellcheck/wiki/SC2015),
"A && B || C is not if-then-else. C may run when A is true".
It does not matter here in practice, because worst case we would run "true" once
too many, but still.
In this case it does not matter, we're merely testing if we can actually
read from that file, but let's make this robust (and shellcheck happy)
for future's sake.
Reference: https://www.shellcheck.net/wiki/SC2162
In 73e124d4fb I've upstreamed the `is_container_with_internal_policy()` function, but so far it was not used anywhere upstream. This is the missing bit.
I could trace the history of that patch back to 2012 (2.7.102-0ubuntu3):
* debian/apparmor.init: do nothing in a container. This can be
removed once stacked profiles are supported and used by lxc.
(LP: #978297)
Context: I lack both knowledge and motivation to keep maintaining this as part of the Debian delta. I'd rather see upstream, and in particular folks more knowledgeable than me about LXC/LXD, or with external motivation factors to work on this part of the stack, take care of it.
Note: Debian has similar code in its [sysvinit script](https://salsa.debian.org/apparmor-team/apparmor/-/blob/debian/master/debian/apparmor.init). I'm not touching that one.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/840
Acked-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
This MR depends on !843, mostly for convenience and to avoid having to rework it once !843 is merged. If this turns out to be a blocker, I can rebase it `--onto` master.
It's based on the draft from !584 and !716, but on top of copying'n'pasting the examples from the GitLab documentation, which was necessary but not sufficient, in this MR I tried my best to make these features work in our context: it actually passes CI, it does not clutter the CI UI with jobs that are not applicable here, and it yields a manageable amount of output (as opposed to hundreds of "OMG you're using format strings", that I don't think any of us is going to triage one by one any time soon).
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/844
Acked-by: Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
This makes the pipeline run time about 30% shorter and, perhaps more importantly, this gives us more direct access to test failures: they are not hidden in the middle of the huge `test-all` log anymore.
As a bonus, this gives us much faster feedback for tests with a short duration.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/843
Acked-by: Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
This allows distributions to start aa-notify automatically, should they wish so, by installing that file in a suitable location, such as `/etc/xdg/autostart`.
This file was introduced in Ubuntu 2.8.95~2430-0ubuntu3 package in 2014, replacing the `/etc/X11/Xsession.d` snippet that Ubuntu had added in 2010.
I'd like to stop having to care about this file as part of the Debian delta and to enable greater collaboration.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/839
Acked-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
libtool generates horrible shell code, you don't want to see the
shellcheck results for it ;-)
This is only relevant for local testing (not in CI) because these files
don't exist in git and therefore don't exist when the shellcheck CI job
runs.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/847
Acked-by: Approved-by: intrigeri <intrigeri@boum.org>
Merged-by: Christian Boltz <apparmor@cboltz.de>
It reports hundreds of issues, lots of them with critical severity.
The GitLab UI allows dismissing them one-by-one very quickly,
but I'm not a good person to do that.
Let's try to have a better signal/noise ratio for this first iteration.
According to
https://docs.gitlab.com/ee/user/application_security/dependency_scanning/,
"dependency scanning lets you know if your application uses an external (open
source) library that is known to be vulnerable".
AppArmor is not the kind of project that benefits from it: we don't link
statically against our dependencies, nor bundle them into released
artifacts.
libtool generates horrible shell code, you don't want to see the
shellcheck results for it ;-)
This is only relevant for local testing (not in CI) because these files
don't exist in git and therefore don't exist when the shellcheck CI job
runs.
- Assume /bin/sh has dash's features and ignore corresponding false positives
- Exclude parser/tst, tests and utils/test directories: they have tons
of shellcheck violations but they don't *directly* impact our users.
Let's first focus on code that runs on production systems.
- Exclude rc.apparmor.slackware: I don't know anything about Slackware's
/bin/sh.
The previous code happened to work only because we always pass either 0 or 1
arguments to these functions. If we ever passed them 2+ arguments,
unexpected things would happen.
For details, see https://www.shellcheck.net/wiki/SC2145
Even if there are Red Hat / Fedora systems that use AppArmor, chances are that
they use systemd, and not an initscript. And even if somehow they do use an
initscript, chances are that it's not this one, as last time it has seen
a non-cosmetic change was in 2007.
* Don't call aa_log_action_end after calling aa_log_failure_msg, because
a generic "failure" message will be outputted twice by the Red Hat and
Slackware init scripts.
* Don't append a space to the initial output from apparmor_stop, in line
with other usages of aa_log_daemon_msg.
Debian doesn't use the init script provided in parser/rc.apparmor.debian,
instead preferring to patch parser/rc.apparmor.functions and call its
functions directly in an init script they maintain themselves (something
they have done since 2006). Since this script is no longer used, and
currently doesn't work correctly anyway because it lacks definitions for
several functions that are relied upon in parser/rc.apparmor.functions,
it can be removed.
If `apparmor_parser -N` (in `profiles_names_list()`) fails,
`aa-remove-unknown` possibly gets an incomplete list of profiles in
`/etc/apparmor.d/` and therefore might remove more profiles than it
should.
Replace the `profiles_names_list()` call with a direct `apparmor_parser`
call, and abort aa-remove-unknown if it exits with $? != 0
Before:
```
aa-remove-unknown -n
AppArmor parser error for /etc/apparmor.d/broken in profile /etc/apparmor.d/broken at line 1: syntax error, unexpected TOK_ID, expecting TOK_OPEN
Would remove 'delete_me'
```
After:
```
./aa-remove-unknown -n
AppArmor parser error for /etc/apparmor.d in profile /etc/apparmor.d/zbroken at line 1: syntax error, unexpected TOK_ID, expecting TOK_OPEN
apparmor_parser exited with failure, aborting.
```
And of course, after fixing the broken profile:
```
./aa-remove-unknown -n
Would remove 'delete_me'
```
Also drop the now-unused profiles_names_list() from rc.apparmor.functions - the only user was aa-remove-unknown.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/836
Acked-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
If apparmor_parser -N (in profiles_names_list()) fails,
aa-remove-unknown possibly gets an incomplete list of profiles in
/etc/apparmor.d/ and therefore might remove more profiles than it
should.
Replace the profiles_names_list() call with a direct apparmor_parser
call, and abort aa-remove-unknown if it exits with $? != 0
Before:
```
aa-remove-unknown -n
AppArmor parser error for /etc/apparmor.d/broken in profile /etc/apparmor.d/broken at line 1: syntax error, unexpected TOK_ID, expecting TOK_OPEN
Would remove 'delete_me'
```
After:
```
./aa-remove-unknown -n
AppArmor parser error for /etc/apparmor.d in profile /etc/apparmor.d/zbroken at line 1: syntax error, unexpected TOK_ID, expecting TOK_OPEN
apparmor_parser exited with failure, aborting.
```
And of course, after fixing the broken profile:
```
./aa-remove-unknown -n
Would remove 'delete_me'
```
Library versioning requires we keep these changes in sync. Since the
3.0.4 release bumped revision we need to do it here as well.
Signed-off-by: John Johansen <john.johansen@canonical.com>
... which is used by aa-remove-unknown.
apparmor_parser can read a whole directory, therefore we don't need to
do the directory listing, excluding *.rpmnew etc. ourself.
Related to https://gitlab.com/apparmor/apparmor/-/issues/148
The AppArmor systemd scripts correctly detect the Windows Subsystem for Linux as a container, since all Linux distros executing under WSL 2 are containerized; however, unlike the majority of containers (since there is no accessible host distribution above them trying to set AppArmor policies that might interfere), AppArmor itself functions without problems in the WSL environment.
This patch adds WSL detection to the is_container_with_internal_policy function, allowing AppArmor to be started and operate normally in a WSL-plus-systemd environment.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/812
Acked-by: John Johansen <john@jjmx.net>
LP:1377338 <https://bugs.launchpad.net/ubuntu/+source/apparmor/+bug/1377338>
has been fixed for quite awhile and we don't need to call xargs as
a fallback when loading policy fails.
In addition we really don't want to be doing this because we want to
be moving to atomic profile loads where if one profile fails the
whole load fails. This is a step in that direction.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Christian Boltz <apparmor@cboltz.de>
This test uses unix_fd_server to open a file and pass
its file descriptor to the attach_disconnected tests, which
then mounts, pivots root and then tries to open the file.
Since the server execs the client, this MR also inverts the order
of the parameters to allow the server to forward the client's args
along with the unix_socket path.
I'm also refactoring out the unix_fd_client logic into unix_fd_common,
so we can use this implementation when creating other clients, which is the case
for the test binary attach_disconnected
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/810
Acked-by: Approved-by: John Johansen <john@jjmx.net>
Merged-by: Georgia Garcia <georgia.garcia@canonical.com>
This test uses unix_fd_server to open a file and pass
its file descriptor to the attach_disconnected tests, which
then mounts, pivots root and then tries to open the file.
Since the server execs the client, this commit also inverts the order
of the parameters to allow the server to forward the client's args
along with the unix_socket path.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/810
Acked-by: John Johansen <john.johansen@canonical.com>
Whenever the evince deb package tries to open a snap browser which was
selected as the default, we get the following denial:
audit[2110]: AVC apparmor="DENIED" operation="exec" profile="/usr/bin/evince" name="/usr/bin/snap" pid=2110 comm="env" requested_mask="x" denied_mask="x" fsuid=1000 ouid=0
As a short-term solution, we are adding a snap-browsers profile
which restricts what snaps opened by evince can do.
The long-term solution is currently not available, but could be
accomplished by using enhanced environment variable filtering/mediation
and delegation of open fds.
Bug: https://launchpad.net/bugs/1794064
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/806
Acked-by: John Johansen <john@jjmx.net>
GTK/QT apps need to read some config files in order to properly render their windows in a graphical session. There are some `qt5` abstractions already, but it looks like the `gtk` abstraction is missing.
The `*gtk*` rules are basically the location of the GTK config files I found on the internet when I was trying to compose this abstraction. Some of the paths are missing in Debian, but different distros can use (or were using) them. Since GTK apps use themes, the abstraction also include the whole `/usr/share/themes/` , `@{HOME}/.themes/` and `@{HOME}/.local/share/themes/` dirs. I'm not sure whether this should be tightened. The `.Xauthority` file is generally needed when you deal with GUI apps under Xserver. Also since all GUI apps redirect output/error to the `~/.xsession-errors` file, this file also was included here.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/65
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/168
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/825
Acked-by: John Johansen <john.johansen@canonical.com>
The Hack used to build the libapparmor swig interface for ruby fails
with ruby 3.1. Instead of trying to do black magic in ruby to rename
the generated Makefile to Makefile.new, just save off the Makefile
and restore after ruby's setup has been called.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/206
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Christian Boltz <apparmor@cboltz.de>
busybox xargs does not have -d nor long --max-procs options, instead use -0 (and separate arguments with printf "%s\\0") and -P which are more portable. While we are here, also add -r (--no-run-if-empty, which also has no long equivalent for busybox) as we likely don't want to run anything if no profile were found
This is useful for alpine systems where findutils is not installed by default, but busybox xargs is available.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/828
Acked-by: John Johansen <john.johansen@canoical.com>
busybox xargs does not have -d nor long --max-procs options,
instead use -0 (and separate arguments with printf "%s\0")
and -P which are more portable.
While we are here, also add -r (--no-run-if-empty, which also has
no long equivalent for busybox) as we likely don't want to run
anything if no profile were found
This is useful for alpine systems where findutils is not installed by
default, but busybox xargs is available.
profiles/apparmor.d: Fix file_mmap violation for bsc#1192336.
See merge request apparmor/apparmor!819
Acked-by: Christian Boltz <apparmor@cboltz.de> for 3.0 and master
If there's still some code left that tries to access an uninitialized
item in 'aa' (reading or writing), this will result in a very visible
crash instead of silently seeming to work.
Testing shows that we seem to correctly initialize each item in 'aa' (no
crashes), therefore let's hope the best ;-)
- allow reading *.so.*
- allow directory listings in .../site-packages/
- allow reading various metadata files
These additions are based on denials seen on openSUSE Leap 15.3 with
python 3.9.
This keeps all existing permissions, and adds a few that were out of
sync:
- /usr/lib*/python3.*/lib-dynload/*.so missed 3.1[0-9]
- /usr/lib/python3/... was missing, only /usr/local/python3/ was allowed
Both aarch64 and s390x have a bigger wtmp record size (16 bytes more than x86_64, 400 bytes total).
The byte position of the timestamp is also different on each architecture. To make things even more interesting, s390x is big endian.
Note that this MR includes more things, like
* moving `get_last_login_timestamp()` to the new `apparmor/notify.py` file
* add unit tests for it
* add wtmp example files from various architectures, including a hand-edited one claiming to be from 1999
* fixing a bug in `get_last_login_timestamp()` that unpacked `type` from too many bytes - which accidently worked on x86_64
* detecting from which architecture the wtmp file comes (luckily the timestamps are located at different locations)
See the individual commits for details.
Fixes: https://bugzilla.opensuse.org/show_bug.cgi?id=1181155
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/809
Acked-by: John Johansen <john.johansen@canonical.com>
Ensure that pre-2000 and post-2050 dates get rejected, and something in
between gets accepted.
This also extends coverage to 100% - before, the post-2050 branch was
not covered.
Both aarch64 and s390x have a bigger wtmp record size (16 bytes more
than x86_64, 400 bytes total).
The byte position of the timestamp is also different on each
architecture. To make things even more interesting, s390x is big endian.
Fixes: https://bugzilla.opensuse.org/show_bug.cgi?id=1181155
'type' is a short (see "ut_type" in wtmp(5)), therefore only read two
bytes and unpack them as short. Afterwards read two padding bytes to
/dev/null.
This accidently worked on x86_64 because it's little endian, but will
fail on big endian architectures.
Whenever the evince deb package tries to open a snap browser which was
selected as the default, we get the following denial:
audit[2110]: AVC apparmor="DENIED" operation="exec" profile="/usr/bin/evince" name="/usr/bin/snap" pid=2110 comm="env" requested_mask="x" denied_mask="x" fsuid=1000 ouid=0
As a short-term solution, we are adding a snap-browsers profile
which restricts what snaps opened by evince can do.
The long-term solution is currently not available, but could be
accomplished by using enhanced environment variable filtering/mediation
and delegation of open fds.
Bug: https://launchpad.net/bugs/1794064
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
... and some rules in the smbd profile to execute it and send it a term
signal.
samba-bgqd is (quoting its manpage) "an internal helper program
performing asynchronous printing-related jobs."
samba-bgqd was added in Samba 4.15.
Fixes: https://bugzilla.opensuse.org/show_bug.cgi?id=1191532
A small patch set to fix two issues with binutils/aa-features-abi:
1. The `aa-features-abi -f` short argument was not added to the
`getopt_long()` set of short arguments, resulting in the command
incorrectly failing when passed -f
2. Due to variable shadowing the file descriptor for the `--file`
argument was not being autoclosed.
- binutils/aa-features-abi: make -f short arg actually be accepted
- binutils/aa-features-abi: fix failure to close fd due to shadowed
var decl
Signed-off-by: Steve Beattie <steve.beattie@canonical.com>
Acked-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/804
The variable used to store the file descriptor for the --file ended up
being declared twice, resulting in the autoclose attribute attached to
the first declaration being removed by the shadowed second declaration.
Fix this by converting the second declaration to just be an assignment,
as was intended.
strace output before:
[...]
) = 1925
close(1) = 0
exit_group(0) = ?
+++ exited with 0 +++
strace output after removing shadow declaration:
) = 1925
close(1) = 0
close(3) = 0
exit_group(0) = ?
+++ exited with 0 +++
(File descriptor 3 is what is returned by the open() call on the
--file argument.)
Signed-off-by: Steve Beattie <steve.beattie@canonical.com>
Acked-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/804
The aa-features-abi -f short argument was not added to the
getopt_long() set of short arguments, resulting in the command
incorrectly failing like so:
$ ./aa-features-abi -f /etc/apparmor.d/abi/3.0
./aa-features-abi: invalid option -- 'f'
USAGE: ./aa-features-abi [OPTIONS] <SOURCE> [OUTPUT OPTIONS]
[...]
The long --file option works as expected.
Fix this by adding f to the set of short arguments passed to
getopt_long().
Signed-off-by: Steve Beattie <steve.beattie@canonical.com>
Acked-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/804
The parser is broken on RLIMIT parsing when receiving unexpected input
because the shared state for this specifies RLIMIT_MODEINCLUDE which
is an unknown start condition resulting in the following warning
parser_lex.l:745: undeclared start condition RLIMIT_MODEINCLUDE
and also means RLIMIT and INCLUDE are not properly handled
Signed-off-by: John Johansen <john.johansen@canonical.com>
If /proc/*/attr/apparmor/current exists, only read that - instead of
falling back to /proc/*/attr/current if a process is for example
unconfined so that read_proc_current returns None.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/199
Some STATUS log events trigger a crash in aa-notify because the log
line doesn't have operation=. Examples are:
type=AVC msg=audit(1630913351.586:4): apparmor="STATUS" info="AppArmor Filesystem Enabled" pid=1 comm="swapper/0"
type=AVC msg=audit(1630913352.610:6): apparmor="STATUS" info="AppArmor sha1 policy hashing enabled" pid=1 comm="swapper/0"
Fix this by not looking at log events without operation=
Also add one of the example events as libapparmor testcase.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/194
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/797
Acked-by: John Johansen <john.johansen@canonical.com>
The default log format for void linux is not handled by current log
parsing. The following example message results in an invalid record
error.
2021-09-11T20:57:41.91645 kern.notice: [ 469.180605] audit: type=1400 audit(1631392703.952:3): apparmor="ALLOWED" operation="mkdir" profile="/usr/bin/kak" name="/run/user/1000/kakoune/" pid=2545 comm="kak" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
This log message fails on parsing
kern.notice:
which differs from the expect syslog format of
host_name kernel:
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/196
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/799
Signed-off-by: John Johansen <john.johansen@canonical.com>
When building with YYDEBUG=1 the following failure occurs
grammar.y:49:46: error: unknown type name ‘no_debug_unused_’; did you mean ‘debug_unused_’?
void aalogparse_error(unused_ void *scanner, no_debug_unused_ char const *s)
^~~~~~~~~~~~~~~~
debug_unused_
g
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/799
Signed-off-by: John Johansen <john.johansen@canonical.com>
Some STATUS log events trigger a crash in aa-notify because the log
line doesn't have operation=. Examples are:
type=AVC msg=audit(1630913351.586:4): apparmor="STATUS" info="AppArmor Filesystem Enabled" pid=1 comm="swapper/0"
type=AVC msg=audit(1630913352.610:6): apparmor="STATUS" info="AppArmor sha1 policy hashing enabled" pid=1 comm="swapper/0"
Fix this by not looking at log events without operation=
Also add one of the example events as libapparmor testcase.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/194
... instead of keeping an own version of it witht the exact same code
and a TODO note to use the one from common.
Also adjust the aa-easyprof tests to directly import AppArmorException
from apparmor.common.
* removes runtime dependency on which
* fixes aa-unconfined when ss is installed outside {/usr,}/bin
Signed-off-by: Michal Vasilek <michal.vasilek@nic.cz>
... instead of None.
This avoids the need to allow type changes (None vs. str).
Also adjust the tests accordingly.
While on it, simplify the tests for attachment.
attachment is always a str, therefore adjust the test to expect an empty
str ('') instead of None - and later converting that None to ''.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/786
Acked-by: John Johansen <john.johansen@canonical.com>
... using [] instead of {}
This should keep the order of checking (and therefore code coverage)
constant, and should fix the randomly appearing partial coverage in
severity.py handle_variable_rank(). In some random cases (depending in
which order the replacements were done and checked for their severity),
the coverage report indicated that the 'elif' condition was never false.
Note: This is only "coverage cosmetics". In "real users", it doesn't
matter in which order the variable replacements are checked because the
result doesn't depend on the ordering.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/790
Acked-by: John Johansen <john.johansen@canonical.com>
... using [] instead of {}
This should keep the order of checking (and therefore code coverage)
constant, and should fix the randomly appearing partial coverage in
severity.py handle_variable_rank(). In some random cases (depending in
which order the replacements were done and checked for their severity),
the coverage report indicated that the 'elif' condition was never false.
Note: This is only "coverage cosmetics". In "real users", it doesn't
matter in which order the variable replacements are checked because the
result doesn't depend on the ordering.
When using the system parser ${parser_config} will be empty and so if this
is quoted when passed as argument to the parser then this gets in
interpreted as the name of a file to be compiled and hence the parser just
prints:
File not found, skipping...
File not found, skipping...
File not found, skipping...
...
for all the aa_policy_cache tests - instead fix this by just not quoting
this argument as suggested by cboltz.
This fixes the regression tests to run to completion without error when
USE_SYSTEM=1 is set.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/788
Signed-off-by: Alex Murray <alex.murray@canonical.com>
Acked-by: Christian Boltz <apparmor@cboltz.de>
Merge branch 'fix-policy-cache-regression-tests' into 'master'
When using the system parser ${parser_config} will be empty and so if this
is unconditionally passed as an argument to the parser then this gets in
interpreted as the name of a file to be compiled and hence the parser just
prints:
File not found, skipping...
File not found, skipping...
File not found, skipping...
...
for all the aa_policy_cache tests - instead fix this to pass a single args
argument to the parser which will only include parser_config if it is not
empty.
This fixes the regression tests to run to completion without error when
USE_SYSTEM=1 is set.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/782
Signed-off-by: Alex Murray <alex.murray@canonical.com>
Acked-by: Steve Beattie <steve@nxnw.org>
When using the system parser ${parser_config} will be empty and so if this
is unconditionally passed as an argument to the parser then this gets in
interpreted as the name of a file to be compiled and hence the parser just
prints:
File not found, skipping...
File not found, skipping...
File not found, skipping...
...
for all the aa_policy_cache tests - instead fix this to pass a single args
argument to the parser which will only include parser_config if it is not
empty.
This fixes the regression tests to run to completion without error when
USE_SYSTEM=1 is set.
Signed-off-by: Alex Murray <alex.murray@canonical.com>
aa-load is a tool that loads cached (compiled) policies into
the kernel. It can receive as argument a file, a cache directory
containing the hash subtree, and a directory containing cached
files directly underneath - no hash.
This tool can be used in the as a guide for other init
systems to load the cached policies directly.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
This commit adds a helper function that splits a string
of overlay directories by either , (comma) or : (colon)
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
libapparmor performs a test for the new stacking interface, however
how it does this test is problematic as it requires all confined
tasks to be given read access to the task introspection interface.
This results in tasks needing to be given read access to the interface
even if they don't need it. Making it possible for tasks to discover
their confinement even if they are not supposed to be able to.
Instead change the check to using state on the parent directory.
This will generate a getattr request instead of read and make it
on the directory instead of on any interface file that could be
used to obtain information.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/713
Signed-off-by: John Johansen john.johansen@canonical.com
Acked-by: Timeout
Adjust the interface check and fallback. Unfortunately there is no
solution that will fix all failure cases. Instead try to minimize
the failure cases and bias towards failures that don't cause a
regression under an old parser/policy.
Note: In cases where we absolutely know the interface should not
be accessed fail those accesses imediately instead of relying
on what ever LSM active to handle it.
While we are at it document the interfaces and failure cases.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/150
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/713
Signed-off-by: John Johansen <john.johansen@canonical.com>
The parameter that is landing upstream in "available" not
"private_enabled".
Also set the correct variable, as previously we were not.
Note: that skipping checking available for the private apparmor
proc interfaces is okay, as the dedicated apparmor interfaces will
fail correctly if available is False.
This just gives a clear way for userspace to query this info without
having to resort to error codes that access to the private interfaces
would return.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/150
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/713
Signed-off-by: John Johansen <john.johansen@canonical.com>
libapparmor performs a test for the new stacking interface, however
how it does this test is problematic as it requires all confined
tasks to be given read access to the task introspection interface.
This results in tasks needing to be given read access to the interface
even if they don't need it. Making it possible for tasks to discover
their confinement even if they are not supposed to be able to.
Instead change the check to using stat on the parent directory.
This will generate a getattr request instead of read and make it
on the directory instead of on any interface file that could be
used to obtain information.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/150
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/713
Signed-off-by: John Johansen <john.johansen@canonical.com>
This resolves an issue in the parser's job handling when running on a machine with >8 CPU cores. The test library was updated to resolve failures in the caching tests caused by the features directory entries being unsorted in the tests.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/775
Acked-by: John Johansen [john@jjmx.net](mailto:john@jjmx.net)
Currently for directory includes the directory timestamp is ignored.
This is wrong as operations like removing a file from the dir won't
be considered in the timestamp check.
Fix this by updating the timestamp check to include the included
directories timestamp.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/760
Signed-off-by: John Johansen <john@jjmx.net>
Acked-by: Georgia Garcia <georgia.garcia@canonical.com>
add abstractions/crypto, allowing reading @{etc_ro}/gcrypt/random.conf r, and move several rules around
See merge request apparmor/apparmor!772
Acked-by: John Johansen <john.johansen@canonical.com>
crypto allows reading /etc/gcrypt/random.conf, which is possibly needed
for all programs that use libgcrypt.
Reported by darix, he has seen it with vivaldi.
If a profile uses features not supported by the tools yet, add a
skiplist to (hopefully temporarily) exclude it from the tests.
This is meant to avoid blocking usage of new features in profiles.
When doing a release, the skip lists should be empty.
The added test makes sure that the python code can parse all profiles
shipped with AppArmor. If this fails, read_profiles() /
read_inactive_profiles() will raise an exception.
Checking for the number of read profiles is mostly done to ensure
*something* is read (to make sure an empty or non-existing directory
won't make the test useless).
We sometimes have random coverage changes that are not reproducible and
therefore hard to debug.
Generate html coverage as part of make coverage-regression, and keep the
resulting utils/test/htmlcov/ as artifact to make debugging easier.
coverage-html needs JS files from various libjs-* packages, install them
in before_script
The file query test on query_label.sh fails on kernels
before 4.4 because of the lack of support. Since there
is no feature file to examine for this feature, we
need to check for the kernel version.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
The regression tests are failing on some older kernels due to
commit 9f834ec18defc369d73ccf9e87a2790bfa05bf46 being cherry-picked
back to them without the corresponding apparmor patch
34c426acb75cc21bdf84685e106db0c1a3565057.
This means we can not rely on a simple features/flag check to determine
how the kernel is behaving with regard to mmap. Since this test is
not concerned with testing mmap, instead of adding a more complex
conditional simplify by always adding the m permission.
Fixes: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1830984
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Georgia Garcia <georgia.garcia@canonical.com>
ask_exec still uses aa[profile][hat], therefore
- use full_profile when accessing hashlog
- correctly split the merged profile name to profile and hat
- avoid accidently initializing non-existing aa[profile][hat]
This fixes a regression from converting lots of code to use flat
profile//hat array keys.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/763
Acked-by: John Johansen <john@jjmx.net>
See https://gitlab.com/redhat-crypto/fedora-crypto-policies for details.
Reported by darix and also my own audit.log - the actual denial was for
/usr/share/crypto-policies/DEFAULT/openssl.txt.
Also allow the /etc/crypto-policies/ counterpart.
(I'm aware that the crypto policies are not really certificates, but
since they are used by several crypto libraries, ssl_certs is probably
the best place for them even if the filename doesn't match.)
ask_exec still uses aa[profile][hat], therefore
- use full_profile when accessing hashlog
- correctly split the merged profile name to profile and hat
- avoid accidently initializing non-existing aa[profile][hat]
This fixes a regression from converting lots of code to use flat
profile//hat array keys.
The check-logprof test in the profiles Makefile specifies
the configuration directory as --configdir ../utils/test,
but when aa-logprof looks for severity.db in the configdir,
it cannot find it.
This fix points the configdir to utils. Note that the
logprof.conf on utils uses the configuration for files
created during the libapparmor installation on the system.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/177
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
All the calling code (directly or indirectly) uses write_flags=True,
therefore drop the parameter to simplify the code.
See the individual commits for details. Also, reviewing the individual commits is probably easier than reviewing the full diff (especially the test changes).
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/759
Acked-by: John Johansen <john@jjmx.net>
Drop unused write_flags parameter from AaTest_get_header and
AaTest_get_header_01. This is a cleanup for the previous commit.
While on it, add xattrs parameter to AaTest_get_header, and add two
tests with non-empty xattrs.
All the calling code (directly or indirectly) uses write_flags=True,
therefore drop the parameter to simplify the code.
A few tests called get_header() with write_flags=False. Adjust or drop
those tests.
Note: to keep the diff readable, the test changes are as small as
possible. The next commit will cleanup the now-superfluous write_flags
values in the tests.
... and into parse_profile_start_line() (which is used by
ProfileStorage.parse()).
With this change, the section handling RE_PROFILE_HAT_DEF in
parse_profile_data() becomes superfluous.
A nice side effect is that two simple_tests parse failures get
accidently ;-) fixed.
Also preserve 'hat' keyword in ProfileStorage instead of always writing hats as '^hat'.
When writing a profile, prepending '^' or 'hat' to a hat name moves from
aa.py write_piece() to ProfileStorage.get_header().
Finally, extend cleanprof_test.* with 'hat bar {...}'.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/756
Acked-by: John Johansen <john@jjmx.net>
... instead of always writing hats as '^hat'.
When writing a profile, prepending '^' or 'hat' to a hat name moves from
aa.py write_piece() to ProfileStorage.get_header().
Also extend cleanprof_test.* with 'hat bar {...}'.
... and into parse_profile_start_line() (which is used by
ProfileStorage.parse()).
With this change, the section handling RE_PROFILE_HAT_DEF in
parse_profile_data() becomes superfluous.
A nice side effect is that two simple_tests parse failures get
accidently ;-) fixed.
The 'profile' flag means "this profile is a profile or a child profile, but not a hat". Since that's true for most cases, rename the flag to 'is_hat'.
Note that `'profile' == True` translates to `'is_hat' == False`
Also adjust all code to switch from 'profile' to 'is_hat'.
Further down the commit list,
* move parse_profile_start{,_to_storage}() into ProfileStorage
* merge parse_profile_start() into parse()
* add some missing tests
See the individual commits for details.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/754
Acked-by: John Johansen <john@jjmx.net>
... and add some tests for other error conditions that don't imply
nested childs, so that the intended failure gets tested.
(This is probably a leftover of the `hat == profile` -> `hat = None`
(while not in a hat/child profile) change.)
... and make them class functions of ProfileStorage.
parse_profile_start_to_storage() gets renamed to parse().
Also move the tests for parse_profile_start() and
parse_profile_start_to_storage() to test-profile-storage.py.
The 'profile' flag means "this profile is a profile or a child profile,
but not a hat". Since that's true for most cases, rename the flag to
'is_hat'.
Note that `'profile' == True` translates to `'is_hat' == False`
Also adjust all code to switch from 'profile' to 'is_hat'.
This value is True if we are in a child profile (not: hat), but that's information we get "for free", so there's no need to hand it around. Besides that, it was wrongly set to False for main profiles (which are not hats).
Remove the pps_set_profile return value from parse_profile_start(), and always assume True unless we were parsing a hat. For completeness, explicitely set it to False when parsing a hat.
To make sure child profiles and hats don't get mixed up, add a child profile to cleanprof_test.{in,out}.
test-libapparmor-test_multi.py always interpreted foo//bar as being a hat, therefore explicitely mark them as such. (Technically not really needed since this is the default, but it helps to make things clear.)
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/751
Acked-by: John Johansen <john@jjmx.net>
This value is True if we are in a child profile (not: hat), but that's
information we get "for free", so there's no need to hand it around.
Besides that, it was wrongly set to False for main profiles (which are
not hats).
Remove the pps_set_profile return value from parse_profile_start(), and
always assume True unless we were parsing a hat. For completeness,
explicitely set it to False when parsing a hat.
To make sure child profiles and hats don't get mixed up, add a child
profile to cleanprof_test.{in,out}.
test-libapparmor-test_multi.py always interpreted foo//bar as being
a hat, therefore explicitely mark them as such. (Technically not really
needed since this is the default, but it helps to make things clear.)
The name var is being improperly used in a warning. Not only is
it being used after it is freed, it also never had the correct value
as the "name" variable contained the value being used as the base
attachment.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: time out
Profile includes can be setup to loop and expand in a pathalogical manner that causes build failures. Fix this by caching which includes have already been seen in a given profile context.
In addition this can speed up some profile compiles, that end up re-including common abstractions. By not only deduping the files being included but skipping the need to reprocess and dedup the rules within the include.
Fixes: https://bugzilla.suse.com/show_bug.cgi?id=1184779
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/743
Acked-by: Steve Beattie <steve.beattie@canonical.com>
Change the tools to use merged profile names (`var['foo//bar']`) instead of the profile/hat layout (`var[profile][hat]`) in many places. Also storage gets moved to ProfileList instead of using a hasher.
Already changed places (in this MR) are parsing profiles, writing profiles, handling and storing of extra profiles, log handling and asking the user about profile additions.
Remaining usage of the `var[profile][hat]` layout are the `aa` and `original_aa` hashers, they'll be replaced in a separate MR.
See the individual commits for details. I'd also recommend to do the review on the individual commits, because the big diff is probably unreadable ;-)
While this is a big chain of changes, each commit contains working code, converting between the two storage layouts with `split_to_merged()` and `merged_to_split()` as needed, with merged layout "bubbling up" in more and more functions.
The long-term goal of these changes is to enable support for nested child profiles in the tools, but - one step after the other ;-)
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/736
Acked-by: John Johansen <john.johansen@canonical.com>
The function decides on the filename of a profile, therefore use
'filename' as variable name instead of the somewhat confusing 'profile'
and 'full_profilename'.
When building the parser with DEBUG=1 enabled the build fails with
the following error and warnings
In file included from parser_main.c:47:0:
parser_main.c: In function ‘void auto_tune_parameters()’:
parser_main.c:1421:35: error: ‘estimate_jobs’ was not declared in this scope
PDEBUG("Auto tune: --jobs=%d", estimate_jobs);
^
parser.h:201:37: note: in definition of macro ‘PDEBUG’
fprintf(stderr, "parser: " fmt, ## args); \
^~~~
parser_main.c:1421:35: note: suggested alternative: ‘estimated_jobs’
PDEBUG("Auto tune: --jobs=%d", estimate_jobs);
^
parser.h:201:37: note: in definition of macro ‘PDEBUG’
fprintf(stderr, "parser: " fmt, ## args); \
^~~~
parser.h:201:41: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘long int’ [-Wformat=]
fprintf(stderr, "parser: " fmt, ## args); \
^
parser_main.c:1428:5: note: in expansion of macro ‘PDEBUG’
PDEBUG("Auto tune: --jobs=%d", jobs);
^~~~~~
Makefile:234: recipe for target 'parser_main.o' failed
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/745
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Christian Boltz <apparmor@cboltz.de>
If an include file includes itsself (for example if local/foo has
'#include <local/foo>'), print a warning instead of calling
load_include() again and again.
This fixes a crash when hitting such a case:
RecursionError: maximum recursion depth exceeded while calling a Python object
Fixes: https://bugzilla.suse.com/show_bug.cgi?id=1184779 for the tools.
The parser will also need a fix.
if a profile doesn't have an attachment specified and the profile name
starts with '/', set the attachment to the profile name. This allows to
have one add_profile() call instead of two very similar ones.
exit early if profile_data is empty (which means we did read an empty
file). This allows to simplify the if conditions to "if active_profile:"
and "else:".
... and adjust all callers and the tests.
For bonus points ;-) this also removes a hasher usage, and extends the
test to check that only the expected profile gets created.
... instead of the 'extras' hasher.
Also adjust all code that previously used 'extras' to use
'extra_profiles'. This affects get_profile() and read_profile().
Add a prof_storage parameter to add_profile() to hand over the actual
profile data/rules as ProfileStorage.
Also adjust several tests to hand over a (dummy) ProfileStorage object.
Note: For now, the parameter is optional because it needs some more changes
in aa.py to be really useable. This will change in a later commit.
... instead of converting log_dict to traditional [profile][hat] layout
in do_logprof_pass().
A nice side effect is that we get sorting the main profile before its
hats for free and can remove the sorting code.
Also update a comment in ask_rule_questions().
Finally, adjust aa-mergeprof so that it hands over a merged log_dict (using
split_to_merged())
... instead of the old [profile][hat] structure.
This needs changes in do_logprof_pass() when calling ask_the_questions()
(using merged_to_split() for now).
Also adjust test-libapparmor-test_multi.py logfile_to_profile() to
expect the merged structure.
... and convert them back to the [profile][hat] layout at the end so
that callers still get the expected result.
As a side effect, log_dict no longer needs to be a hasher().
... instead of the old [profile][hat] structure.
This needs changes in read_profile() (now using the merged profile name)
and attach_profile_data() (using merged_to_split() for now).
Also adjust test-aa.py to expect the merged structure.
Change parse_profile_data() to internally use merged profile names
(`foo//bar`) instead of separate profile and hat, and only split it up
again to the [profile][hat] layout at the very end with
merged_to_split().
A nice side effect is that we get rid of a hasher() usage.
parse_profile_data() also gets changed to use `hat = None` (instead of
`hat = profile`) if not inside a child profile. As a result,
parse_profile_start() and one of its tests need a small change.
Besides that small change, calling code should not see a difference, and
the tests also stay working.
the video abstraction currently it only contains the following rules:
@{sys}/class/video4linux r,
@{sys}/class/video4linux/** r,
Judging by the v4l path, this abstraction should be used whenever some
app wants to use for instance a webcam or other USB cameras to stream
video usually in chat apps. I was testing some apps, and it looks like
the following rules are needed to make the video streaming possible:
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/159
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/740
Signed-off-by: John Johansen <john.johansen@canonical.com>
2021-04-14 14:51:09 -07:00
1830 changed files with 69177 additions and 20050 deletions
if image-garden make --question "$GARDEN_SYSTEM.$ARCH.run" "$GARDEN_SYSTEM.$ARCH.qcow2" "$GARDEN_SYSTEM.seed.iso" "$GARDEN_SYSTEM.user-data" "$GARDEN_SYSTEM.meta-data"; then
test -f ./.libs/$(EXPECTED_SO_NAME)||{echo'*** unexpected .so name/number for libapparmor (expected $(EXPECTED_SO_NAME), the actual filename is shown below) ***'; ls -l ./.libs/libapparmor.so.*.* ;exit 1;}
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
